What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 127 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 127of 491

5975-14-386-0337
Guy

143860337
IF036-023: RNCC: 3 | RNVC: 9

24 Aug 1983

5975-14-416-1059
Cable Marker Sleeve

144161059
HT15-25BAR11-009: RNCC: 3 | RNVC: 2
HT15-25BA11-009: RNCC: 5 | RNVC: 9

3 Jun 1987

5975-14-526-5031
Cable Marker Sleeve

145265031
D65377-32: RNCC: 3 | RNVC: 2

1 Aug 2001

5975-14-384-4034
Cable Marker Sleeve

143844034
362050-03REPS: RNCC: 3 | RNVC: 2
M65VERTREPS: RNCC: 5 | RNVC: 2

4 May 1983

5975-14-353-1431
Cable Marker Sleeve

143531431
594501406: RNCC: 3 | RNVC: 2

8 Dec 1978

5975-14-413-9673
Cable Marker Sleeve

144139673
BJM09122: RNCC: 3 | RNVC: 2

22 Jan 1987

5975-14-312-0510
Push Button

143120510
23009369: RNCC: 3 | RNVC: 2
23009369-4: RNCC: 5 | RNVC: 2
36C2F830: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-400-0982
Junction Box

144000982
217981: RNCC: 3 | RNVC: 2

24 Apr 1985

5975-14-316-9298
Stuffing Tube

143169298
466-8M3P189: RNCC: 3 | RNVC: 2
466-8M3P189: RNCC: 5 | RNVC: 2

1 Jan 1975

5975-14-546-1513
Guide Rail

145461513
212876: RNCC: 3 | RNVC: 2

15 Jun 2005

5975-14-494-4253
Nonmetallic Raceway

144944253
LF40110RAL9001: RNCC: 3 | RNVC: 2
LF40110RAL9001: RNCC: 5 | RNVC: 9
F300 0T 017 3084: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-547-4355
Cable Marker Sleeve

145474355
5010610472: RNCC: 3 | RNVC: 2

13 Oct 2005

5975-27-056-5837
Cable Marker Sleeve

270565837
515033: RNCC: 5 | RNVC: 9

12 Apr 2012

5975-14-382-6229
Cable Marker Sleeve

143826229
96080536: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-352-0521
Junction Box

143520521
M5D601-60-800: RNCC: 3 | RNVC: 2

16 Oct 1978

5975-14-489-4078
Cable Marker Sleeve

144894078
620-848-306-0: RNCC: 3 | RNVC: 2

16 Jul 1997

5975-14-275-0052
Conduit Outlet

142750052
NO PRIMARY REF14-275-0052: RNCC: 3 | RNVC: 2
206-0307-9: RNCC: 5 | RNVC: 9

1 Jan 1971

5975-14-539-3941
Junction Box

145393941
10390944: RNCC: 3 | RNVC: 2

13 Jan 2004

5975-14-409-4144
Cable Marker Sleeve

144094144
23608884-5: RNCC: 3 | RNVC: 2

28 May 1986

5975-14-504-1094
Cable Marker Sleeve

145041094
39256609: RNCC: 3 | RNVC: 2

6 Feb 1998

5975-14-041-5170
Chassis Base

140415170
107115: RNCC: 3 | RNVC: 2
107115: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-521-2081
Cable Marker Sleeve

145212081
TS142544: RNCC: 3 | RNVC: 2

12 Jul 2000

5975-14-555-1761
Metallic Raceway

145551761
82350573000: RNCC: 3 | RNVC: 2

9 Oct 2007

5975-14-312-5054
Junction Box

143125054
A10-63-110-00-0M3: RNCC: 3 | RNVC: 2
A10-63-110-00-0M3: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-485-0959
Interior Cable Rack

144850959
401024: RNCC: 3 | RNVC: 2
401024: RNCC: 5 | RNVC: 2
401024: RNCC: 5 | RNVC: 2

7 Jan 1997

5975-14-505-6691
Conduit Outlet

145056691
C28002100000: RNCC: 3 | RNVC: 2

26 Mar 1998

5975-14-440-5139
Cable Marker Sleeve

144405139
20130527: RNCC: 3 | RNVC: 2
20130527: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-539-9463
Junction Box

145399463
04418: RNCC: 3 | RNVC: 2
M4ZS460D3018: RNCC: 5 | RNVC: 2

25 Feb 2004

5975-27-055-4587
Stuffing Tube

270554587
NOZ M40X2: RNCC: 2 | RNVC: 1
NOZ M40X2: RNCC: 5 | RNVC: 9

6 Dec 2011

5975-27-047-0463
Raceway Elbow

270470463
67781S: RNCC: 5 | RNVC: 9

30 Oct 2009

5975-14-329-4594
Junction Box

143294594
502584: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-342-4914
Junction Box Cover

143424914
4770001210: RNCC: 3 | RNVC: 2

16 May 1977

5975-14-348-7050
Cable Collar

143487050
1181071: RNCC: 3 | RNVC: 2
1181071: RNCC: 5 | RNVC: 2

19 Apr 1978

5975-14-419-4223
Fanning Strip

144194223
16508155: RNCC: 3 | RNVC: 2
16508155: RNCC: 5 | RNVC: 9

16 Oct 1987

5975-14-439-4841
Stuffing Tube

144394841
515100-AMIANTE: RNCC: 3 | RNVC: 9
BVLEFS1: RNCC: 5 | RNVC: 2

9 May 1990

5975-14-442-4848
Stuffing Tube Plug

144424848
SST2IMO: RNCC: 3 | RNVC: 2

17 Oct 1990

5975-14-356-9332
Cable Marker Sleeve

143569332
036002080100: RNCC: 3 | RNVC: 2
3597470041024: RNCC: 5 | RNVC: 2
360107REP0: RNCC: 5 | RNVC: 2
360208REP0: RNCC: 5 | RNVC: 2
V40N0IRREP0: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-521-2080
Cable Marker Sleeve

145212080
TS142543: RNCC: 3 | RNVC: 2

12 Jul 2000

5975-14-489-4079
Cable Marker Sleeve

144894079
620-848-313-0: RNCC: 3 | RNVC: 2

16 Jul 1997

5975-14-356-9190
Cable Marker Sleeve

143569190
036002030072: RNCC: 3 | RNVC: 2
V16R0UGEREP2: RNCC: 5 | RNVC: 2
3597470040508: RNCC: 5 | RNVC: 2
360103REP2: RNCC: 5 | RNVC: 2
360203REP2: RNCC: 5 | RNVC: 2
V16REP2: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-404-7053
Metallic Raceway

144047053
20250807: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-402-1160
Cable Marker Sleeve

144021160
401787: RNCC: 3 | RNVC: 2
BGE401787: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-526-9218
Stuffing Tube

145269218
124113UU: RNCC: 3 | RNVC: 2

18 Sep 2001

5975-14-535-1389
Stuffing Tube

145351389
509404: RNCC: 3 | RNVC: 2
5000901720: RNCC: 5 | RNVC: 2

14 May 2003

5975-14-409-0360
Cable Marker Sleeve

144090360
P12-3-2JON: RNCC: 3 | RNVC: 2
P12-3-2JORNNR: RNCC: 5 | RNVC: 2
12450498-9: RNCC: 5 | RNVC: 2

16 Apr 1986

5975-14-382-4428
Nonmetallic Raceway

143824428
4770202390: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-449-5753
Cable Marker Sleeve

144495753
03640002004I: RNCC: 3 | RNVC: 2
364002REPI: RNCC: 5 | RNVC: 2
3597470050279: RNCC: 5 | RNVC: 2

27 Aug 1991

5975-33-001-8580
Conduit Outlet

330018580
25.20.07: RNCC: 3 | RNVC: 2

8 May 1991

5975-14-554-2109
Junction Box

145542109
516 142: RNCC: 3 | RNVC: 2
516 142: RNCC: 3 | RNVC: 2

13 Jun 2007

5975-14-438-3996
Junction Box

144383996
NO PRIMARY REF14-438-3996: RNCC: 3 | RNVC: 2
30798: RNCC: 5 | RNVC: 9

20 Mar 1990

5975-14-299-1220
Metallic Raceway

142991220
121E63-415-17-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-347-8869
Cable Marker Sleeve

143478869
0084103000: RNCC: 3 | RNVC: 2

1 Mar 1978

5975-14-394-2218
Cable Collar

143942218
686105-18: RNCC: 3 | RNVC: 2
686105: RNCC: 5 | RNVC: 2
SKB2M: RNCC: 5 | RNVC: 2

23 Jun 1984

5975-14-270-9115
Cable Marker Sleeve

142709115
204337-1401A: RNCC: 3 | RNVC: 2
7815CXZ11S30KD1401AJ: RNCC: 5 | RNVC: 9

1 Jan 1970

5975-14-302-6682
Junction Box

143026682
NO PRIMARY REF14-302-6682: RNCC: 3 | RNVC: 2
19625: RNCC: 5 | RNVC: 9
BJ-64A: RNCC: 6 | RNVC: 9

1 Jan 1973

5975-14-420-7455
Cable Marker Sleeve

144207455
ST400S58P201-006: RNCC: 3 | RNVC: 2
1-006: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-416-7237
Cable Marker Sleeve

144167237
HT15-25BA11-068: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-342-0073
Interior Cable Rack

143420073
C90D108SZ100: RNCC: 3 | RNVC: 2
C90D108SZ100: RNCC: 5 | RNVC: 2
102084: RNCC: 5 | RNVC: 9
C90D108SZ100: RNCC: 5 | RNVC: 9

14 Apr 1977

5975-14-343-7027
Junction Box

143437027
15A175: RNCC: 3 | RNVC: 2

13 Jul 1977

5975-14-384-7019
Cable Marker Sleeve

143847019
20250573: RNCC: 3 | RNVC: 2

2 Jun 1983

5975-14-416-7325
Cable Marker Sleeve

144167325
HT20-25BA12-059: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-500-9229
Interconnecting Box

145009229
4357-0018: RNCC: 3 | RNVC: 2
F300 0T 024 9438: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-536-3910
Fanning Strip

145363910
275-07-09: RNCC: 3 | RNVC: 2

30 Jul 2003

5975-14-526-5118
Cable Marker Sleeve

145265118
D65377-22: RNCC: 3 | RNVC: 2

1 Aug 2001

5975-14-343-6803
Cable Marker Sleeve

143436803
ST400S58P206-051: RNCC: 3 | RNVC: 2

13 Jul 1977

5975-14-353-7345
Junction Box

143537345
169E1: RNCC: 3 | RNVC: 2

16 Jan 1979

5975-14-354-8193
Junction Box

143548193
356002040100: RNCC: 3 | RNVC: 2

20 Feb 1979

5975-14-380-3187
Cable Marker Sleeve

143803187
C68203: RNCC: 3 | RNVC: 2

8 Nov 1982

5975-14-522-7533
Switch Box Case

145227533
CMFCA N1: RNCC: 3 | RNVC: 2

20 Nov 2000

5975-14-356-9229
Cable Marker Sleeve

143569229
036002040035: RNCC: 3 | RNVC: 2
3597470040560: RNCC: 5 | RNVC: 2
360104REP5: RNCC: 5 | RNVC: 2
360204REP5: RNCC: 5 | RNVC: 2
V22VERTREP5: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-442-9109
Chassis Base

144429109
20213118: RNCC: 3 | RNVC: 2
20213118: RNCC: 5 | RNVC: 9

7 Nov 1990

5975-15-153-4196
Blank Panel

151534196
5137-275-08: RNCC: 3 | RNVC: 2

17 Jan 2001

5975-14-282-5339
Cable Marker Sleeve

142825339
9133024: RNCC: 3 | RNVC: 2
9133024: RNCC: 5 | RNVC: 9

1 Jan 1971

5975-27-039-4549
Cable Collar

270394549
05001FK0388: RNCC: 5 | RNVC: 9

3 Dec 2007

5975-14-448-4033
Blank Panel

144484033
90DD236501: RNCC: 3 | RNVC: 2

26 Jun 1991

5975-14-470-3407
Blank Panel

144703407
802290140112: RNCC: 3 | RNVC: 2
802290140112: RNCC: 5 | RNVC: 9
SDM802290140112: RNCC: 5 | RNVC: 9

15 Jun 1994

5975-14-409-5010
Junction Box

144095010
ST159-2BM872-11: RNCC: 3 | RNVC: 2

28 May 1986

5975-14-544-4476
Junction Box

145444476
20003-063: RNCC: 3 | RNVC: 2
101022003038A: RNCC: 3 | RNVC: 9

31 Jan 2005

5975-14-353-1432
Cable Marker Sleeve

143531432
594501407: RNCC: 3 | RNVC: 2

8 Dec 1978

5975-14-508-0519
Interconnecting Box

145080519
46249455: RNCC: 3 | RNVC: 2
20300153: RNCC: 5 | RNVC: 9

26 Aug 1998

5975-14-536-6844
Interconnecting Box

145366844
47149172: RNCC: 3 | RNVC: 2

10 Sep 2003

5975-14-429-8336
Junction Box

144298336
262671: RNCC: 3 | RNVC: 2
89411252: RNCC: 5 | RNVC: 2

14 Feb 1989

5975-27-025-7085
Cable Collar

270257085
949746: RNCC: 2 | RNVC: 1
949746: RNCC: 2 | RNVC: 1

31 Mar 2005

5975-14-463-3688
Chassis Base

144633688
16380200: RNCC: 3 | RNVC: 2
16380200: RNCC: 5 | RNVC: 9

9 Jun 1993

5975-14-547-1255
Stuffing Tube Plug

145471255
3343: RNCC: 3 | RNVC: 2

27 Sep 2005

5975-14-372-8230
Cable Marker Sleeve

143728230
0294701750: RNCC: 3 | RNVC: 2

21 Sep 1981

5975-14-431-0536
Stuffing Tube

144310536
098017: RNCC: 3 | RNVC: 2
98017: RNCC: 5 | RNVC: 2
RAR4673: RNCC: 5 | RNVC: 2
3245060980177: RNCC: 5 | RNVC: 2
5353097: RNCC: 5 | RNVC: 9
LG98017: RNCC: 5 | RNVC: 9

3 Apr 1989

5975-14-520-2253
Cable Marker Sleeve

145202253
782113010043: RNCC: 3 | RNVC: 2
03520013004M: RNCC: 3 | RNVC: 2
352013REPM: RNCC: 5 | RNVC: 2
3597470260944: RNCC: 5 | RNVC: 2

17 May 2000

5975-14-549-5916
Metallic Raceway

145495916
21252063-7: RNCC: 3 | RNVC: 2

20 Apr 2006

5975-14-466-1277
Interior Cable Rack

144661277
5230116: RNCC: 3 | RNVC: 2

27 Oct 1993

5975-33-190-3039
Conduit Outlet

331903039
9980: RNCC: 3 | RNVC: 2

20 Jul 1995

5975-14-254-1123
Cable Marker Sleeve

142541123
352002REPP: RNCC: 3 | RNVC: 2
99042441: RNCC: 5 | RNVC: 2
HELAVIATWIN1REPP: RNCC: 5 | RNVC: 2
99042441: RNCC: 5 | RNVC: 9
99042441: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-457-6867
Cable Collar

144576867
1-00403120: RNCC: 3 | RNVC: 2

15 Sep 1992

5975-14-508-0267
Interconnecting Box

145080267
09670370573: RNCC: 3 | RNVC: 2
117-3036: RNCC: 5 | RNVC: 2
09670370573: RNCC: 5 | RNVC: 2

26 Aug 1998

5975-33-108-1769
Cable Marker Sleeve

331081769
5975000635: RNCC: 3 | RNVC: 2

29 Jan 2001

5975-14-485-2814
Interconnecting Box

144852814
4643576A: RNCC: 3 | RNVC: 2

15 Jan 1997

5975-14-549-4548
Interconnecting Box

145494548
H118199C: RNCC: 3 | RNVC: 2

5 Apr 2006

5975-14-275-0049
Conduit Outlet

142750049
01150: RNCC: 3 | RNVC: 2
115: RNCC: 5 | RNVC: 2
252-6144: RNCC: 5 | RNVC: 2

1 Jan 1971

5975-14-251-8435
Rigid Metal Conduit

142518435
MRBPE13ADXFILETEMANCH0NNEPEINT: RNCC: 2 | RNVC: 2

1 Jan 1968

5975-14-356-9204
Cable Marker Sleeve

143569204
03600104015G: RNCC: 3 | RNVC: 2
3597470036464: RNCC: 5 | RNVC: 2
360104REPG: RNCC: 5 | RNVC: 2
V22REPG: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-513-6932
Switch Box Case

145136932
23AESWN71117902A: RNCC: 3 | RNVC: 2
SYB0164: RNCC: 5 | RNVC: 2

6 Apr 1999

5975-14-493-4431
Cable Marker Sleeve

144934431
BGE011183: RNCC: 3 | RNVC: 2
F300 0T 013 0700: RNCC: 6 | RNVC: 9

8 Oct 1997

5975-14-404-8370
Cable Marker Sleeve

144048370
29747470: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-422-7259
Cable Marker Sleeve

144227259
0294702070: RNCC: 3 | RNVC: 2
302-420-601-0: RNCC: 5 | RNVC: 2

17 Mar 1988

5975-14-365-1336
Junction Box

143651336
C19236: RNCC: 3 | RNVC: 2
9375735403: RNCC: 5 | RNVC: 2

2 Sep 1980

5975-14-383-0546
Cable Marker Sleeve

143830546
16899905: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-508-3187
Junction Box

145083187
151403D: RNCC: 3 | RNVC: 2

2 Sep 1998

5975-27-016-9408
Metallic Raceway

270169408
4T42-OZEL1: RNCC: 2 | RNVC: 1
4T42-OZEL1: RNCC: 2 | RNVC: 1

15 Apr 2003

5975-33-200-2790
Switch Box Case

332002790
100461030402: RNCC: 3 | RNVC: 2

21 Nov 2001

5975-14-031-2938
Conduit Outlet

140312938
222784: RNCC: 3 | RNVC: 2

14 Jun 1980

5975-14-364-5577
Junction Box

143645577
003941222P: RNCC: 3 | RNVC: 2

2 Sep 1980

5975-14-330-0561
Metallic Raceway

143300561
3009-89: RNCC: 3 | RNVC: 2
85-680-0471: RNCC: 6 | RNVC: 9

2 Jul 1975

5975-14-447-9329
Cable Marker Sleeve

144479329
TMS1-8NR11U4: RNCC: 3 | RNVC: 9

10 Jun 1991

5975-14-300-3204
Fanning Strip

143003204
15437760: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-333-2618
Cable Collar

143332618
15159610: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-555-9471
Stuffing Tube

145559471
CAP500500: RNCC: 3 | RNVC: 2

11 Jan 2008

5975-14-428-5579
Cable Marker Sleeve

144285579
73G2E: RNCC: 3 | RNVC: 2

8 Dec 1988

5975-14-448-4040
Blank Panel

144484040
90DD221701: RNCC: 3 | RNVC: 2

26 Jun 1991

5975-14-535-3316
Interconnecting Box

145353316
010482062P: RNCC: 3 | RNVC: 2

22 May 2003

5975-14-543-0397
Cable Marker Sleeve

145430397
73K0X: RNCC: 3 | RNVC: 2

18 Aug 2004

5975-14-345-0167
Cable Marker Sleeve

143450167
P12-3-2J04: RNCC: 3 | RNVC: 2
484325-4: RNCC: 5 | RNVC: 2
P12-3-17J04: RNCC: 5 | RNVC: 2
P12-4: RNCC: 5 | RNVC: 2
P12J04: RNCC: 5 | RNVC: 2

5 Oct 1977

5975-14-370-2841
Stuffing Tube

143702841
NO PRIMARY REF14-370-2841: RNCC: 3 | RNVC: 2
91360003: RNCC: 5 | RNVC: 2
DE9PL11304: RNCC: 5 | RNVC: 9

18 May 1981

5975-14-456-6415
Interior Cable Rack

144566415
BXLO000ACH001-1500X500: RNCC: 3 | RNVC: 2

16 Jul 1992

5975-14-470-9097
Cable Marker Sleeve

144709097
807067-06: RNCC: 3 | RNVC: 2

13 Jul 1994

5975-14-416-7341
Cable Marker Sleeve

144167341
HT30-25BA13-010: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-549-9181
Metallic Raceway

145499181
LF40151: RNCC: 3 | RNVC: 2

18 May 2006

5975-14-385-7519
Interior Cable Rack

143857519
809017-13: RNCC: 3 | RNVC: 2

26 Jul 1983

5975-14-368-5612
Cable Marker Sleeve

143685612
362003-02SYMBM: RNCC: 3 | RNVC: 2
362003-02SYMB-: RNCC: 5 | RNVC: 2
M22BLEUREPM0INS: RNCC: 5 | RNVC: 2
H030-6BUM0INS: RNCC: 5 | RNVC: 9

20 Feb 1981

5975-33-161-1914
Junction Box

331611914
5975-000631: RNCC: 3 | RNVC: 2

27 Apr 1995

5975-14-471-4729
Cable Marker Sleeve

144714729
036200080016: RNCC: 3 | RNVC: 2
T286-469: RNCC: 5 | RNVC: 2
3597470047309: RNCC: 5 | RNVC: 2
362008REP6: RNCC: 5 | RNVC: 2

31 Aug 1994

5975-14-399-7569
Rigid Metal Conduit

143997569
A48001-21ATD: RNCC: 2 | RNVC: 2

14 Mar 1985

5975-14-297-3571
Stuffing Tube

142973571
R280131: RNCC: 3 | RNVC: 2
R8330: RNCC: 5 | RNVC: 2

1 Jan 1973

5975-14-476-1406
Cable Marker Sleeve

144761406
HOI50-RO-R: RNCC: 3 | RNVC: 2
HOI50-R: RNCC: 5 | RNVC: 2
HOI50-R-ROSE: RNCC: 5 | RNVC: 2

24 May 1995

5975-14-356-9212
Cable Marker Sleeve

143569212
03600104015O: RNCC: 3 | RNVC: 2
3597470036556: RNCC: 5 | RNVC: 2
360104LETTREO: RNCC: 5 | RNVC: 2
V22REP0: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-456-6434
Metallic Raceway

144566434
BXLO000ACH001F8LG200MM: RNCC: 3 | RNVC: 2

16 Jul 1992

5975-15-000-2767
Junction Box

150002767
129-0103-49-1A1: RNCC: 3 | RNVC: 2

14 Feb 2013

5975-14-361-7562
Stuffing Tube

143617562
NO PRIMARY REF14-361-7562: RNCC: 3 | RNVC: 2
M12414-82: RNCC: 5 | RNVC: 2
PE7M: RNCC: 5 | RNVC: 9

20 Feb 1980

5975-14-456-7902
Blank Panel

144567902
955120-211CPV: RNCC: 3 | RNVC: 2
F300 0T 014 1782: RNCC: 5 | RNVC: 9

24 Jul 1992

5975-14-440-8627
Cable Marker Sleeve

144408627
03620050001H: RNCC: 3 | RNVC: 2
3597470048115: RNCC: 5 | RNVC: 2
362050-01REPH: RNCC: 5 | RNVC: 2
362050REPH: RNCC: 5 | RNVC: 2
M65BLANCREPH: RNCC: 5 | RNVC: 2

31 Jul 1990

5975-14-319-4994
Junction Box

143194994
250-16M71P16CP19B: RNCC: 3 | RNVC: 2
PA250-16M71P16CP19B: RNCC: 5 | RNVC: 2

1 Jan 1975

5975-14-422-7262
Cable Marker Sleeve

144227262
0294740010: RNCC: 3 | RNVC: 2
302-303-201-0: RNCC: 5 | RNVC: 2

17 Mar 1988

5975-14-483-3326
Fanning Strip

144833326
511-7368-5037-2: RNCC: 3 | RNVC: 2

5 Sep 1996

5975-14-472-5989
Cable Marker Sleeve

144725989
620-848-341-0: RNCC: 3 | RNVC: 2

3 Nov 1994

5975-14-427-5088
Cable Collar

144275088
NO PRIMARY REF14-427-5088: RNCC: 3 | RNVC: 2
10189: RNCC: 5 | RNVC: 9

20 Oct 1988

5975-14-474-7332
Interconnecting Box

144747332
NO PRIMARY REF14-474-7332: RNCC: 3 | RNVC: 2
F96BG0103: RNCC: 5 | RNVC: 9
89253699: RNCC: 5 | RNVC: 9

1 Mar 1995

5975-14-420-7554
Cable Marker Sleeve

144207554
ST400S58P203-040: RNCC: 3 | RNVC: 2
3-040: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-416-1066
Cable Marker Sleeve

144161066
H050-25RG1: RNCC: 3 | RNVC: 2
HELSYN100H50ROUGE: RNCC: 5 | RNVC: 9

3 Jun 1987

5975-14-382-4420
Nonmetallic Raceway

143824420
4770202310: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-463-7828
Interconnecting Box

144637828
16630712: RNCC: 3 | RNVC: 2
16630712: RNCC: 5 | RNVC: 9

30 Jun 1993

5975-14-453-2738
Metallic Raceway

144532738
551829: RNCC: 3 | RNVC: 2

12 Feb 1992

5975-14-434-7486
Stuffing Tube

144347486
NO PRIMARY REF14-434-7486: RNCC: 3 | RNVC: 2
488: RNCC: 5 | RNVC: 9

3 Oct 1989

5975-14-265-7309
Junction Box

142657309
26041605: RNCC: 3 | RNVC: 2
C041605: RNCC: 5 | RNVC: 2
BJ-204B: RNCC: 6 | RNVC: 9

1 Jan 1970

5975-14-521-2063
Cable Marker Sleeve

145212063
TS142442: RNCC: 3 | RNVC: 2

12 Jul 2000

5975-14-376-0690
Junction Box

143760690
BR2: RNCC: 3 | RNVC: 2

30 Mar 1982

5975-14-483-3008
Interconnecting Box

144833008
WNSNGCC0004E0-A-REP12: RNCC: 3 | RNVC: 2
WNSNGCC0004E0-INDICE.A-REP12: RNCC: 5 | RNVC: 2

31 Aug 1996

5975-14-520-2117
Cable Marker Sleeve

145202117
2000500650: RNCC: 3 | RNVC: 2

17 May 2000

5975-14-385-0984
Metallic Raceway

143850984
M4DW2201702601: RNCC: 3 | RNVC: 2

26 Jul 1983

5975-14-405-1018
Cable Marker Sleeve

144051018
362006-01REPV: RNCC: 3 | RNVC: 2
M40BLANCREPV: RNCC: 5 | RNVC: 2

20 Nov 1985

5975-15-064-8321
Armature Support

150648321
192-0334/01: RNCC: 3 | RNVC: 2

1 Mar 1983

5975-14-474-5549
Cable Marker Sleeve

144745549
03690001004E: RNCC: 3 | RNVC: 2
3597470053362: RNCC: 5 | RNVC: 2
369001REPE: RNCC: 5 | RNVC: 2
M-65-M2REPE: RNCC: 5 | RNVC: 2
782114005243: RNCC: 5 | RNVC: 2
782114005243: RNCC: 5 | RNVC: 9

22 Feb 1995

5975-14-384-3604
Push Button

143843604
BMC1-1-001N: RNCC: 3 | RNVC: 9

4 May 1983

5975-14-389-4768
Nonmetallic Raceway

143894768
365A61-3586-3301: RNCC: 3 | RNVC: 2

20 Dec 1983

5975-14-479-1547
Cable Marker Sleeve

144791547
03520015004G: RNCC: 3 | RNVC: 2
3597470261408: RNCC: 5 | RNVC: 2
HELAVIATWIN4SYMBG: RNCC: 5 | RNVC: 2
352015REPG: RNCC: 5 | RNVC: 2
352-015-G: RNCC: 5 | RNVC: 2

18 Dec 1995

5975-14-501-6372
Cable Marker Sleeve

145016372
370102-04REP0: RNCC: 3 | RNVC: 2
91633935: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-14-524-6814
Junction Box

145246814
6D113-C6P113: RNCC: 3 | RNVC: 2
23RNSW400000027PL2/2.PAGE24: RNCC: 3 | RNVC: 2
C6P113: RNCC: 5 | RNVC: 2
SYB2997: RNCC: 5 | RNVC: 2

4 Apr 2001

5975-14-310-6361
Cable Marker Sleeve

143106361
H50-35JOK215: RNCC: 3 | RNVC: 2
N50-35JAUNEK215: RNCC: 5 | RNVC: 2
H50-35J0K215: RNCC: 5 | RNVC: 2
N50-35JOK215: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-508-5096
Crossarm Brace

145085096
21240326-00: RNCC: 3 | RNVC: 2
21240326-6: RNCC: 5 | RNVC: 2

16 Sep 1998

5975-14-420-7463
Cable Marker Sleeve

144207463
ST400S58P201-030: RNCC: 3 | RNVC: 2
1-030: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-464-5848
Junction Box

144645848
YSV1002: RNCC: 3 | RNVC: 2

11 Aug 1993

5975-14-356-9313
Cable Marker Sleeve

143569313
03600107015H: RNCC: 3 | RNVC: 2
3597470037799: RNCC: 5 | RNVC: 2
V40REPH: RNCC: 5 | RNVC: 2
360107REPH: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-368-5627
Cable Marker Sleeve

143685627
036200050015: RNCC: 3 | RNVC: 2
362005-03REP5: RNCC: 5 | RNVC: 2
T286-458: RNCC: 5 | RNVC: 2
3597470045619: RNCC: 5 | RNVC: 2
362005REP5: RNCC: 5 | RNVC: 2
M37VERTREP5: RNCC: 5 | RNVC: 2
H050-6VR5: RNCC: 5 | RNVC: 9

20 Feb 1981

5975-14-517-7342
Cable Marker Sleeve

145177342
320-316-001-0: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-14-416-7299
Cable Marker Sleeve

144167299
HT20-25BA12-033: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-299-1683
Junction Box

142991683
121E63-472-35-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-346-2139
Push Button

143462139
5702-1-227: RNCC: 3 | RNVC: 2

12 Dec 1977

5975-14-465-4063
Cable Marker Sleeve

144654063
LTMS1/2-9: RNCC: 3 | RNVC: 9
LTMS1/2-46MMBLANC: RNCC: 5 | RNVC: 9

28 Sep 1993

5975-14-465-8550
Cable Marker Sleeve

144658550
HOI40-0: RNCC: 3 | RNVC: 2
HOI40-4NR0: RNCC: 3 | RNVC: 2
HOI40-0-NOIR: RNCC: 5 | RNVC: 2

14 Oct 1993

5975-14-503-8906
Stuffing Tube

145038906
410770: RNCC: 3 | RNVC: 2

4 Feb 1998

5975-14-535-3330
Interconnecting Box

145353330
010471035P: RNCC: 3 | RNVC: 2

22 May 2003

5975-14-402-1116
Cable Marker Sleeve

144021116
401627: RNCC: 3 | RNVC: 2
BGE401627: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-523-5528
Raceway Elbow

145235528
030226: RNCC: 3 | RNVC: 2
3245060302269: RNCC: 5 | RNVC: 2
30226: RNCC: 5 | RNVC: 2

24 Jan 2001

5975-14-470-0065
Interconnecting Box

144700065
42-0106: RNCC: 3 | RNVC: 2

25 May 1994

5975-14-400-3435
Conduit Outlet

144003435
BASA01-34: RNCC: 3 | RNVC: 2

24 Apr 1985

5975-14-465-6826
Stuffing Tube

144656826
240909: RNCC: 3 | RNVC: 2

6 Oct 1993

5975-14-356-9376
Cable Marker Sleeve

143569376
036002090138: RNCC: 3 | RNVC: 2
3597470041130: RNCC: 5 | RNVC: 2
V50GRISREP8: RNCC: 5 | RNVC: 2
360209REP8: RNCC: 5 | RNVC: 2
360108REP8: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-268-0103
Stuffing Tube

142680103
823D66CS2C0URTE: RNCC: 2 | RNVC: 2
5975BA-CS2C: RNCC: 5 | RNVC: 2

1 Jan 1970

5975-14-393-5419
Cable Marker Sleeve

143935419
352011REP3: RNCC: 3 | RNVC: 2
6070-GT-0000081: RNCC: 5 | RNVC: 9

7 Apr 1984

5975-15-115-3530
Cable Marker Sleeve

151153530
538-28-1010: RNCC: 3 | RNVC: 2

29 Nov 1992

5975-14-456-4377
Cable Marker Sleeve

144564377
H085-5BA9: RNCC: 3 | RNVC: 2

2 Jul 1992

5975-14-473-3981
Nonmetallic Raceway

144733981
332A61-3355-01: RNCC: 3 | RNVC: 2

13 Dec 1994

5975-14-436-4173
Stand Base

144364173
TABEC20-20: RNCC: 3 | RNVC: 2

22 Dec 1989

5975-14-358-7307
Stuffing Tube Plug

143587307
2339-242-14: RNCC: 3 | RNVC: 2
2339-242-14: RNCC: 5 | RNVC: 9

7 Sep 1979

5975-14-315-4570
Stuffing Tube

143154570
620-844-767-0: RNCC: 3 | RNVC: 2
620-844-767-0: RNCC: 5 | RNVC: 2

1 Jan 1975

5975-14-384-3614
Push Button

143843614
BMC1-1-011N: RNCC: 3 | RNVC: 9

4 May 1983

5975-14-486-6646
Cable Collar

144866646
355A61-5117-25: RNCC: 3 | RNVC: 2

1 Apr 1997

5975-14-422-0593
Stuffing Tube

144220593
109737: RNCC: 3 | RNVC: 9

18 Feb 1988

5975-14-406-7635
Fanning Strip

144067635
23620007: RNCC: 3 | RNVC: 2
14-23620007: RNCC: 5 | RNVC: 2

8 Jan 1986

5975-14-431-5969
Cable Marker Sleeve

144315969
364-002-1-8: RNCC: 3 | RNVC: 2

26 Apr 1989

5975-14-473-2300
Cable Marker Sleeve

144732300
SLP20-10VR: RNCC: 3 | RNVC: 2
620-867-080-0: RNCC: 5 | RNVC: 2

7 Dec 1994

5975-14-403-5922
Cable Hanger

144035922
365A61-3531-20: RNCC: 3 | RNVC: 2

21 Aug 1985

5975-33-204-2179
Interconnecting Box

332042179
CLT-0435-10: RNCC: 3 | RNVC: 2

17 May 2005

5975-14-355-7573
Cable Marker Sleeve

143557573
353063-01REPL: RNCC: 3 | RNVC: 2
PLI02-10LBLANC: RNCC: 5 | RNVC: 2

19 Mar 1979

5975-14-424-6940
Cable Marker Sleeve

144246940
0725-201-200: RNCC: 3 | RNVC: 2
85-801-2197: RNCC: 6 | RNVC: 9

2 Jun 1988

5975-15-203-2079
Cable Marker Sleeve

152032079
999-8001-76-616: RNCC: 3 | RNVC: 2
(241)A0126999-8001-76-616: RNCC: 5 | RNVC: 2

28 Nov 2007

5975-14-391-1610
Junction Box

143911610
NO PRIMARY REF14-391-1610: RNCC: 3 | RNVC: 2
27220: RNCC: 5 | RNVC: 2

1 Mar 1984

5975-14-031-2788
Cable Marker Sleeve

140312788
BJM08283: RNCC: 3 | RNVC: 2

14 Jun 1980

5975-14-368-5638
Cable Marker Sleeve

143685638
036200170072: RNCC: 3 | RNVC: 2
3597470142585: RNCC: 5 | RNVC: 2
362017-07REP2: RNCC: 5 | RNVC: 2
362017REP2: RNCC: 5 | RNVC: 2
M50R0UGEREP2: RNCC: 5 | RNVC: 2
H085-6RG2: RNCC: 5 | RNVC: 9

20 Feb 1981

5975-14-552-5355
Blank Panel

145525355
61003447AC: RNCC: 3 | RNVC: 2

12 Jan 2007

5975-14-338-8165
Cable Marker Sleeve

143388165
P25-4-8GI8: RNCC: 3 | RNVC: 2
P25GI8: RNCC: 5 | RNVC: 2
P25-8: RNCC: 5 | RNVC: 2

17 Dec 1976

5975-27-006-7272
Blank Panel

270067272
1.HIBM-1D-408: RNCC: 2 | RNVC: 1

8 Apr 1999

5975-14-031-8852
Cable Marker Sleeve

140318852
102398105: RNCC: 3 | RNVC: 2
0659203024: RNCC: 5 | RNVC: 2
102398105: RNCC: 5 | RNVC: 2

5 Jul 1980

5975-33-211-1981
Stuffing Tube

332111981
RS00100431023: RNCC: 3 | RNVC: 2
UNE-EN 50262: RNCC: 4 | RNVC: 1

8 Jul 2013

5975-14-524-6817
Junction Box

145246817
6D113-H6P113: RNCC: 3 | RNVC: 2
23RNSW400000027PL2/2.PAGE51: RNCC: 3 | RNVC: 2
H6P113: RNCC: 5 | RNVC: 2
SYB3003: RNCC: 5 | RNVC: 2

4 Apr 2001

5975-14-351-0451
Cable Marker Sleeve

143510451
7815CXZ11S30KD1190AJ: RNCC: 3 | RNVC: 2
204337-1190A: RNCC: 5 | RNVC: 2

10 Aug 1978

5975-14-550-2922
Junction Box

145502922
2236349240: RNCC: 3 | RNVC: 2

15 Jun 2006

5975-33-002-4056
Metallic Raceway

330024056
1830: RNCC: 3 | RNVC: 2

3 Feb 1995

5975-14-431-1931
Cable Marker Sleeve

144311931
03520007004TER: RNCC: 3 | RNVC: 2
352007SYMBTERRE: RNCC: 5 | RNVC: 2
3597470259863: RNCC: 5 | RNVC: 2
DLT360337: RNCC: 5 | RNVC: 2

11 Apr 1989

5975-14-339-4455
Cable Marker Sleeve

143394455
SLP15-10J0RSNR: RNCC: 3 | RNVC: 2
620-849-044-0: RNCC: 5 | RNVC: 2
620-849-044-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-362-8234
Interior Cable Rack

143628234
PLATPERF0RE30X3-1ACIER: RNCC: 3 | RNVC: 2

19 Mar 1980

5975-33-106-8065
Interconnecting Box

331068065
R063516-01: RNCC: 3 | RNVC: 2

31 Mar 1999

5975-14-550-6012
Ground Rod

145506012
SM01002023A: RNCC: 3 | RNVC: 2

29 Jun 2006

5975-14-449-2471
Ground Rod

144492471
0239392: RNCC: 3 | RNVC: 2
0239392: RNCC: 5 | RNVC: 2

7 Aug 1991

5975-14-342-4940
Metallic Raceway

143424940
4770001780: RNCC: 3 | RNVC: 2

16 May 1977

5975-17-124-4090
Junction Box

171244090
955600179300: RNCC: 3 | RNVC: 2
9556 001 79300: RNCC: 5 | RNVC: 2

27 Jun 2012

5975-14-514-6661
Interconnecting Box

145146661
017216X: RNCC: 3 | RNVC: 2
CHN017216X: RNCC: 5 | RNVC: 9

8 Jun 1999

5975-14-323-0577
Cable Marker Sleeve

143230577
0084034600: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-363-3362
Guy Set

143633362
HBI20100: RNCC: 3 | RNVC: 2

3 Apr 1980

5975-15-153-4202
Blank Panel

151534202
5137-274-08: RNCC: 3 | RNVC: 2

17 Jan 2001

5975-14-382-6231
Cable Marker Sleeve

143826231
96080538: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-425-4627
Cable Marker Sleeve

144254627
20130280: RNCC: 3 | RNVC: 2
20130280: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-14-331-0799
Push Button

143310799
LUF44F3550-17819AV5: RNCC: 3 | RNVC: 2
17819AV5: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-14-421-2384
Interior Cable Rack

144212384
000041: RNCC: 3 | RNVC: 2
101066: RNCC: 3 | RNVC: 9
CF30/200: RNCC: 5 | RNVC: 2

11 Jan 1988

5975-14-361-1623
Cable Marker Sleeve

143611623
78-15CXZ5S30-27R0UGE: RNCC: 3 | RNVC: 2
78-15CXZ5S30-27R: RNCC: 5 | RNVC: 2

24 Jan 1980

5975-14-386-5063
Cable Marker Sleeve

143865063
320-047-101-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5975-15-068-1418
Cable Marker Sleeve

150681418
F492A1B-1-03: RNCC: 3 | RNVC: 2

31 Mar 1986

5975-14-485-0962
Interior Cable Rack

144850962
401049: RNCC: 3 | RNVC: 2
401049: RNCC: 5 | RNVC: 2
401049: RNCC: 5 | RNVC: 2

7 Jan 1997

5975-14-440-5018
Cable Marker Sleeve

144405018
20130483: RNCC: 3 | RNVC: 2
20130483: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-431-5962
Cable Marker Sleeve

144315962
364-002-1-1: RNCC: 3 | RNVC: 2

26 Apr 1989

5975-14-420-7525
Cable Marker Sleeve

144207525
ST400S58P202-043: RNCC: 3 | RNVC: 2
2-043: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-411-6335
Ground Rod

144116335
120011-4124: RNCC: 3 | RNVC: 9

27 Aug 1986

5975-14-393-3059
Junction Box

143933059
22019141-4: RNCC: 3 | RNVC: 2

7 Apr 1984

5975-14-453-5800
Cable Marker Sleeve

144535800
BAZ11715: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-485-2356
Interior Cable Rack

144852356
421141: RNCC: 3 | RNVC: 2
421141: RNCC: 5 | RNVC: 2
421141: RNCC: 5 | RNVC: 2

13 Jan 1997

5975-14-402-4090
Cable Marker Sleeve

144024090
01PR0TMS4W1-8: RNCC: 1 | RNVC: 2
TMS1-8NR13U9: RNCC: 3 | RNVC: 2
HS032WE4DSU: RNCC: 5 | RNVC: 2
TMS1-8NR13U9: RNCC: 5 | RNVC: 9
TMSSCE2X1-8S3-9: RNCC: 5 | RNVC: 9

3 Jul 1985

5975-14-454-1694
Stuffing Tube

144541694
NO PRIMARY REF14-454-1694: RNCC: 3 | RNVC: 2
F7-002-125: RNCC: 5 | RNVC: 2

24 Mar 1992

5975-14-420-7479
Cable Marker Sleeve

144207479
ST400S58P201-125: RNCC: 3 | RNVC: 2
1-125: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-314-4443
Junction Box Cover

143144443
3511-190-53191: RNCC: 3 | RNVC: 2
3511 190 53191: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-469-9640
Cable Marker Sleeve

144699640
213813-01: RNCC: 3 | RNVC: 2

18 May 1994

5975-14-268-0097
Stuffing Tube

142680097
823D66CS3N0RMALE: RNCC: 2 | RNVC: 2
5975BA-CS3L: RNCC: 5 | RNVC: 2

1 Jan 1970

5975-15-009-0034
Blank Panel

150090034
132-0214/03: RNCC: 3 | RNVC: 2

29 Apr 1999

5975-15-153-3891
Blank Panel

151533891
5137-314-03: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-14-489-4077
Cable Marker Sleeve

144894077
620-848-305-0: RNCC: 3 | RNVC: 2

16 Jul 1997

5975-14-545-8931
Cable Marker Sleeve

145458931
03740180004N: RNCC: 3 | RNVC: 2
03740180004N: RNCC: 5 | RNVC: 2
6070-GT-0000012: RNCC: 5 | RNVC: 9

25 May 2005

5975-14-420-9289
Junction Box

144209289
815-1-71-200: RNCC: 3 | RNVC: 2

5 Jan 1988

5975-14-501-6650
Cable Marker Sleeve

145016650
370103-04REP8: RNCC: 3 | RNVC: 2
91633951: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-14-294-2540
Runner

142942540
121A63-104-05-1: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-15-189-2250
Junction Box

151892250
8208582: RNCC: 3 | RNVC: 2

9 Feb 2010

5975-14-356-9180
Cable Marker Sleeve

143569180
03600103015S: RNCC: 3 | RNVC: 2
360103REPS: RNCC: 5 | RNVC: 2
V16REPS: RNCC: 5 | RNVC: 2
3597470036174: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-456-4368
Cable Marker Sleeve

144564368
H050-4VR5: RNCC: 3 | RNVC: 2

2 Jul 1992

5975-14-476-1394
Cable Marker Sleeve

144761394
HOI50-RO-H: RNCC: 3 | RNVC: 2
HOI50-H: RNCC: 5 | RNVC: 2
HOI50-H-ROSE: RNCC: 5 | RNVC: 2

24 May 1995

5975-27-055-1004
Stuffing Tube

270551004
5970-ED-287-0500: RNCC: 2 | RNVC: 2

4 Nov 2011

5975-27-046-3196
Junction Box Cover

270463196
660-10653: RNCC: 2 | RNVC: 1

29 Jul 2009

5975-14-483-5116
Cable Crosshead

144835116
1743016: RNCC: 3 | RNVC: 2
5970-65-0043016: RNCC: 6 | RNVC: 9

18 Sep 1996

5975-14-294-8383
Cable Marker Sleeve

142948383
3009-40-09EQSN3: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-520-4466
Cable Marker Sleeve

145204466
M45AA0101-810: RNCC: 3 | RNVC: 2
M45AA0101-810: RNCC: 5 | RNVC: 9

17 May 2000

5975-14-423-0548
Rigid Metal Conduit

144230548
39533480: RNCC: 3 | RNVC: 2
39533480: RNCC: 5 | RNVC: 9

31 Mar 1988

5975-14-436-9057
Cable Marker Sleeve

144369057
BJM07306: RNCC: 3 | RNVC: 2

9 Jan 1990

5975-14-403-0550
Cable Marker Sleeve

144030550
38206616: RNCC: 3 | RNVC: 2

25 Jul 1985

5975-14-485-0981
Interior Cable Rack

144850981
421478: RNCC: 3 | RNVC: 2
421478: RNCC: 5 | RNVC: 2
421478: RNCC: 5 | RNVC: 2

7 Jan 1997

5975-14-367-3299
Interior Cable Rack

143673299
5200002: RNCC: 3 | RNVC: 2
ATL10015AG: RNCC: 3 | RNVC: 2
ATL10015AG: RNCC: 5 | RNVC: 2

11 Dec 1980

5975-15-158-0177
Cable Marker Sleeve

151580177
47915A114000: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-404-8483
Cable Marker Sleeve

144048483
29747894: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-15-003-0994
Junction Box

150030994
182710295: RNCC: 3 | RNVC: 2
(241)A0199182710295: RNCC: 5 | RNVC: 2

25 Oct 2013

5975-14-478-0416
Stuffing Tube Plug

144780416
195040: RNCC: 3 | RNVC: 2
BML-195040: RNCC: 5 | RNVC: 2

9 Oct 1995

5975-27-021-0379
Nonmetallic Raceway

270210379
5975-00111-00093: RNCC: 2 | RNVC: 1

15 Dec 2003

5975-14-426-4894
Cable Marker Sleeve

144264894
WBS5-1: RNCC: 3 | RNVC: 2

1 Sep 1988

5975-14-466-0699
Cable Marker Sleeve

144660699
PR175-48302: RNCC: 3 | RNVC: 2

27 Oct 1993

5975-14-344-8507
Junction Box

143448507
7506-21301: RNCC: 3 | RNVC: 2
7506-21301: RNCC: 5 | RNVC: 2

9 Sep 1977

5975-14-416-7321
Cable Marker Sleeve

144167321
HT20-25BA12-055: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-15-153-3955
Blank Panel

151533955
5137-367-02: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-15-153-3964
Blank Panel

151533964
5137-388-03: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-14-385-7518
Interior Cable Rack

143857518
809022-13: RNCC: 3 | RNVC: 2

26 Jul 1983

5975-14-393-5278
Cable Marker Sleeve

143935278
HOI30-4RO-A: RNCC: 3 | RNVC: 2
H0I30A: RNCC: 5 | RNVC: 2

7 Apr 1984

5975-14-501-3014
Interconnecting Box

145013014
805.315: RNCC: 3 | RNVC: 2
805-315: RNCC: 3 | RNVC: 2
F300 0T 025 3423: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-514-0308
Ground Rod

145140308
F5002100: RNCC: 3 | RNVC: 2

22 Apr 1999

5975-33-206-3143
Nonmetallic Raceway

332063143
78023-2: RNCC: 3 | RNVC: 2

5 Nov 2007

5975-14-445-4421
Cable Marker Sleeve

144454421
TRSA1012C1-3: RNCC: 3 | RNVC: 9

14 Feb 1991

5975-15-157-3077
Cable Spacer

151573077
SKE 4F/3-4: RNCC: 3 | RNVC: 2
SKE 4F/3-4: RNCC: 5 | RNVC: 9

24 Jun 2003

5975-14-479-1562
Cable Marker Sleeve

144791562
03520015004U: RNCC: 3 | RNVC: 2
352015REPU: RNCC: 5 | RNVC: 2
352-015-U: RNCC: 5 | RNVC: 2
3597470261545: RNCC: 5 | RNVC: 2
HELAVIATWIN4SYMBU: RNCC: 5 | RNVC: 2

18 Dec 1995

5975-14-445-6317
Cable Marker Sleeve

144456317
H090-6BU6: RNCC: 3 | RNVC: 2
5045023: RNCC: 5 | RNVC: 9

20 Feb 1991

5975-14-470-8448
Junction Box

144708448
148E561-01: RNCC: 3 | RNVC: 2
148E561-01: RNCC: 5 | RNVC: 9

8 Jul 1994

5975-14-501-6318
Cable Marker Sleeve

145016318
H040-4GR8: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-14-266-7911
Junction Box

142667911
10045-46: RNCC: 3 | RNVC: 2
414-10045-46: RNCC: 5 | RNVC: 2
BJ-36B: RNCC: 6 | RNVC: 9

1 Jan 1970

5975-14-453-4941
Cable Marker Sleeve

144534941
353042-01REPS: RNCC: 3 | RNVC: 2

24 Feb 1992

5975-14-524-6815
Junction Box

145246815
23RNSW400000027PL2/2.PAGE55: RNCC: 3 | RNVC: 2
6D113-D6P113: RNCC: 3 | RNVC: 2
SYB2998: RNCC: 5 | RNVC: 2
D6P113: RNCC: 5 | RNVC: 2

4 Apr 2001

5975-14-411-9173
Interior Cable Rack

144119173
E631-27X30X1,5: RNCC: 3 | RNVC: 2

16 Sep 1986

5975-14-420-9970
Switch Box Case

144209970
39228444: RNCC: 3 | RNVC: 2
39228444: RNCC: 5 | RNVC: 9

6 Jan 1988

5975-14-512-1893
Interconnecting Box

145121893
26023231-7: RNCC: 3 | RNVC: 2

8 Feb 1999

5975-15-153-3904
Blank Panel

151533904
5137-319-02: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-15-199-0518
Nonmetallic Raceway

151990518
9597 480 01296: RNCC: 3 | RNVC: 2
(241)A00429597 480 01296: RNCC: 5 | RNVC: 2

10 Jan 2005

5975-14-444-6856
Cable Marker Sleeve

144446856
1-027: RNCC: 3 | RNVC: 2

16 Jan 1991

5975-27-028-0081
Metallic Raceway

270280081
L TIPI BAGLANTI ELEMANI: RNCC: 2 | RNVC: 1

25 Nov 2005

5975-14-296-6500
Stuffing Tube

142966500
520100: RNCC: 3 | RNVC: 2
2-11363: RNCC: 5 | RNVC: 2
BB1: RNCC: 5 | RNVC: 2
52010: RNCC: 5 | RNVC: 2

1 Jan 1973

5975-14-416-7434
Cable Marker Sleeve

144167434
HT30-25BA13-004: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-545-9122
Cable Marker Sleeve

145459122
03740120004U: RNCC: 3 | RNVC: 2
03740120004U: RNCC: 5 | RNVC: 2
6070-GT-0000054: RNCC: 5 | RNVC: 9

26 May 2005

5975-14-488-3360
Metallic Raceway

144883360
25641537: RNCC: 3 | RNVC: 2
2-564153-7: RNCC: 5 | RNVC: 2

30 Apr 1997

5975-14-461-7301
Junction Box

144617301
22341817-7: RNCC: 3 | RNVC: 2

24 Mar 1993

5975-14-472-5985
Cable Marker Sleeve

144725985
620-848-337-0: RNCC: 3 | RNVC: 2

3 Nov 1994

5975-14-353-9953
Cable Marker Sleeve

143539953
0294701390: RNCC: 3 | RNVC: 2
620-857-305-0: RNCC: 5 | RNVC: 2
302-302-101-0: RNCC: 5 | RNVC: 2
302-302-101P: RNCC: 5 | RNVC: 2

16 Jan 1979

5975-14-485-2318
Interior Cable Rack

144852318
421321: RNCC: 3 | RNVC: 2
421321: RNCC: 5 | RNVC: 2
421321: RNCC: 5 | RNVC: 2

13 Jan 1997

5975-33-203-4082
Metallic Raceway

332034082
93074-3: RNCC: 3 | RNVC: 2

1 Apr 2004

5975-14-472-8246
Ground Rod

144728246
24130101: RNCC: 3 | RNVC: 2

16 Nov 1994

5975-14-350-7819
Cable Marker Sleeve

143507819
620-848-212-0: RNCC: 3 | RNVC: 2

12 Jul 1978

5975-14-383-3392
Cable Marker Sleeve

143833392
78-15CXZ5S30M36BLEU: RNCC: 3 | RNVC: 2
78-15CXZ5S30BM36: RNCC: 5 | RNVC: 2
78-15CXZ5S30M36B: RNCC: 5 | RNVC: 2

11 Apr 1983

5975-14-524-6803
Junction Box

145246803
5DP55-B5P55: RNCC: 3 | RNVC: 2
23RNSW400000027PL2/2.PAGE39: RNCC: 3 | RNVC: 2
SYB2987: RNCC: 5 | RNVC: 2
B5P55: RNCC: 5 | RNVC: 2

4 Apr 2001

5975-14-345-2169
Junction Box Cover

143452169
FD1B601-40820: RNCC: 3 | RNVC: 2

5 Oct 1977

5975-14-317-7401
Rigid Metal Conduit

143177401
511EQ0055REP25: RNCC: 3 | RNVC: 2
A0386-002F9: RNCC: 5 | RNVC: 2
511EQ055REP25: RNCC: 5 | RNVC: 2

1 Jan 1975

5975-33-103-5024
Conduit Outlet

331035024
4504: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-14-453-5780
Cable Marker Sleeve

144535780
BAZ9461: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-416-7427
Cable Marker Sleeve

144167427
HT20-25BA12-015: RNCC: 3 | RNVC: 2
2-015: RNCC: 5 | RNVC: 2

25 Jun 1987

5975-14-353-9941
Cable Marker Sleeve

143539941
0294700790: RNCC: 3 | RNVC: 2
302-300-601-0: RNCC: 5 | RNVC: 2
302-300-601P: RNCC: 5 | RNVC: 2
620-857-290-0: RNCC: 5 | RNVC: 2

16 Jan 1979

5975-33-203-4084
Metallic Raceway

332034084
93021-3: RNCC: 3 | RNVC: 2

1 Apr 2004

5975-14-453-4463
Ground Rod

144534463
DE3M8212: RNCC: 3 | RNVC: 2
89406409: RNCC: 5 | RNVC: 2
DE3M8212: RNCC: 5 | RNVC: 9

19 Feb 1992

5975-14-479-6738
Fanning Strip

144796738
07852: RNCC: 3 | RNVC: 2
3303430078524: RNCC: 5 | RNVC: 2

31 Jan 1996

5975-14-352-0011
Junction Box

143520011
NO PRIMARY REF14-352-0011: RNCC: 3 | RNVC: 2
745005: RNCC: 5 | RNVC: 9

16 Oct 1978

5975-14-254-1165
Cable Marker Sleeve

142541165
03520004004R: RNCC: 3 | RNVC: 2
99008776: RNCC: 5 | RNVC: 2
HELAVIATWIN3REPR: RNCC: 5 | RNVC: 2
352004REPR: RNCC: 5 | RNVC: 2
99008776: RNCC: 5 | RNVC: 9
99008776: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-508-1447
Cable Marker Sleeve

145081447
5-601-200: RNCC: 3 | RNVC: 2

26 Aug 1998

5975-14-426-7720
Metallic Raceway

144267720
4-018-0032: RNCC: 3 | RNVC: 2

21 Sep 1988

5975-14-541-5377
Interconnecting Box

145415377
1091910-001: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-384-4027
Cable Marker Sleeve

143844027
03620002001-: RNCC: 3 | RNVC: 2
3597470043486: RNCC: 5 | RNVC: 2
M11BLANCSYMBM: RNCC: 5 | RNVC: 2
362002-01SYMB-: RNCC: 5 | RNVC: 2
362002SYMBM: RNCC: 5 | RNVC: 2
H015-6BAM0INS: RNCC: 5 | RNVC: 2
362002-01SYMBM: RNCC: 5 | RNVC: 2

4 May 1983

5975-14-345-0168
Cable Marker Sleeve

143450168
P12-3: RNCC: 3 | RNVC: 2
484325-3: RNCC: 5 | RNVC: 2
P12-3-170R3: RNCC: 5 | RNVC: 2

5 Oct 1977

5975-14-327-5332
Cable Marker Sleeve

143275332
036200050019: RNCC: 3 | RNVC: 2
H050-4BA9: RNCC: 3 | RNVC: 2
T286-462: RNCC: 5 | RNVC: 2
3597470045657: RNCC: 5 | RNVC: 2
362005-01REP9: RNCC: 5 | RNVC: 2
362005REP9: RNCC: 5 | RNVC: 2
M37BLANCREP9: RNCC: 5 | RNVC: 2
H050-6BA9: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-545-8952
Cable Marker Sleeve

145458952
03740180004Q: RNCC: 3 | RNVC: 2
03740180004Q: RNCC: 5 | RNVC: 2
6070-GT-0000015: RNCC: 5 | RNVC: 9

25 May 2005

5975-27-056-6648
Ground Rod

270566648
MM-0000-5797: RNCC: 2 | RNVC: 1

25 Apr 2012

5975-14-321-4310
Cable Collar

143214310
GSM426-013F26: RNCC: 3 | RNVC: 2
000EL036REP8-2A8-6: RNCC: 5 | RNVC: 2
GSM426-13F26: RNCC: 5 | RNVC: 2

1 Jan 1975

5975-14-254-1077
Cable Marker Sleeve

142541077
035200010049: RNCC: 3 | RNVC: 2
99001652: RNCC: 5 | RNVC: 2
352-01REP9: RNCC: 5 | RNVC: 2
352001REP9: RNCC: 5 | RNVC: 2
352011REP9: RNCC: 5 | RNVC: 2
3597470256930: RNCC: 5 | RNVC: 2
HELAVIATWIN0REP9: RNCC: 5 | RNVC: 2
99001652: RNCC: 5 | RNVC: 9
99001652: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-418-0948
Junction Box

144180948
554066: RNCC: 3 | RNVC: 2

6 Aug 1987

5975-14-416-7234
Cable Marker Sleeve

144167234
HT15-25BA11-058: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-479-9312
Cable Marker Sleeve

144799312
TMS-3/4NR11U9: RNCC: 3 | RNVC: 9
TMS3-4NR11U9: RNCC: 5 | RNVC: 9

14 Feb 1996

5975-14-380-1393
Ground Rod

143801393
TV1610: RNCC: 3 | RNVC: 2
4380030: RNCC: 5 | RNVC: 2
TV16-10: RNCC: 5 | RNVC: 2

8 Nov 1982

5975-14-470-9100
Cable Marker Sleeve

144709100
807067-13: RNCC: 3 | RNVC: 2

13 Jul 1994

5975-15-203-9340
Blank Panel

152039340
9597 480 01561: RNCC: 3 | RNVC: 2
(241)A0042959748001561: RNCC: 5 | RNVC: 2

28 Jul 2011

5975-14-404-8388
Cable Marker Sleeve

144048388
29747489: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-541-5457
Guide Rail

145415457
31101834: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-419-0049
Stuffing Tube Plug

144190049
191370: RNCC: 3 | RNVC: 2
2201-191370: RNCC: 5 | RNVC: 2
000913-18131: RNCC: 5 | RNVC: 2

28 Sep 1987

5975-14-332-1624
Push Button

143321624
LUF44F3550-17819AV1: RNCC: 3 | RNVC: 2
17819AV1: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-14-299-0989
Metallic Raceway

142990989
121E63-412-00-1: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-523-2117
Cable Marker Sleeve

145232117
01PR0TMS1W1-2: RNCC: 1 | RNVC: 2
TMS1-2-46MMU9: RNCC: 3 | RNVC: 2
HS127WE1DSU: RNCC: 5 | RNVC: 2
TMS1-2-46MMU9: RNCC: 5 | RNVC: 9
TMSSCE2X1-2-9: RNCC: 5 | RNVC: 9

10 Jan 2001

5975-14-409-0363
Cable Marker Sleeve

144090363
P12-3-2JOY: RNCC: 3 | RNVC: 2
P12-3-2JORYNR: RNCC: 5 | RNVC: 2
12450750-5: RNCC: 5 | RNVC: 2

16 Apr 1986

5975-14-339-3142
Cable Marker Sleeve

143393142
036200020012: RNCC: 3 | RNVC: 2
H015-4RG2: RNCC: 3 | RNVC: 2
HO15-2: RNCC: 3 | RNVC: 2
T286-485: RNCC: 5 | RNVC: 2
3597470043905: RNCC: 5 | RNVC: 2
362002-07REP2: RNCC: 5 | RNVC: 2
362002REP2: RNCC: 5 | RNVC: 2
H015-6RG2: RNCC: 5 | RNVC: 2
HO15-2-ROUGE: RNCC: 5 | RNVC: 2
91394677: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-464-2311
Interconnecting Box

144642311
620-861-718-0: RNCC: 3 | RNVC: 2

28 Jul 1993

5975-14-365-1894
Metallic Raceway

143651894
M589-15029: RNCC: 3 | RNVC: 2

19 Sep 1980

5975-14-415-0943
Stuffing Tube

144150943
IC110-22: RNCC: 3 | RNVC: 2

26 Mar 1987

5975-14-440-8630
Cable Marker Sleeve

144408630
03620050001K: RNCC: 3 | RNVC: 2
3597470048146: RNCC: 5 | RNVC: 2
362050-01REPK: RNCC: 5 | RNVC: 2
362050REPK: RNCC: 5 | RNVC: 2
M65BLANCREPK: RNCC: 5 | RNVC: 2

31 Jul 1990

5975-14-433-4327
Cable Collar

144334327
0866722Y00: RNCC: 3 | RNVC: 2

25 Jul 1989

5975-14-469-2585
Interconnecting Box

144692585
704A46-570-083: RNCC: 1 | RNVC: 2
2506-301-1: RNCC: 3 | RNVC: 2

13 Apr 1994

5975-14-475-3198
Cable Marker Sleeve

144753198
HT150-35JORW043721: RNCC: 3 | RNVC: 2
HT150-35JOW043721: RNCC: 5 | RNVC: 2

29 Mar 1995

5975-27-017-7000
Cable Spacer

270177000
930-0474/01: RNCC: 2 | RNVC: 1

20 Aug 2003

5975-14-505-6599
Switch Box Case

145056599
B28003100000: RNCC: 3 | RNVC: 2

26 Mar 1998

5975-14-530-5418
Stuffing Tube

145305418
539200-565240: RNCC: 3 | RNVC: 2
11.27716REP22: RNCC: 5 | RNVC: 2
SYB5148: RNCC: 5 | RNVC: 2

20 Jun 2002

5975-27-054-0813
Nonmetallic Raceway

270540813
98017736: RNCC: 2 | RNVC: 2

21 Jul 2011

5975-14-388-7448
Cable Marker Sleeve

143887448
P075-3-2BA9: RNCC: 3 | RNVC: 2
P075BA: RNCC: 5 | RNVC: 2
P075BA9: RNCC: 5 | RNVC: 2

3 Nov 1983

5975-14-473-3986
Nonmetallic Raceway

144733986
332A61-3360-00: RNCC: 3 | RNVC: 2

13 Dec 1994

5975-15-156-1717
Cable Collar

151561717
4789808: RNCC: 3 | RNVC: 2

11 Dec 2002

5975-14-404-8372
Cable Marker Sleeve

144048372
29747472: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-423-1979
Junction Box

144231979
247017: RNCC: 3 | RNVC: 2

9 Apr 1988

5975-14-400-1003
Junction Box Cover

144001003
BA12949: RNCC: 3 | RNVC: 2
220578: RNCC: 5 | RNVC: 2

24 Apr 1985

5975-14-553-4760
Fanning Strip

145534760
0177800430: RNCC: 3 | RNVC: 2

5 Apr 2007

5975-14-453-5789
Cable Marker Sleeve

144535789
BAZ9476: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-314-6408
Cable Marker Sleeve

143146408
0098707060: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-499-4427
Cable Marker Sleeve

144994427
5600023-060320-000-0-11: RNCC: 3 | RNVC: 2
5600023-060320.000.0-11: RNCC: 5 | RNVC: 2
F300 0T 022 0965: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-409-0343
Cable Marker Sleeve

144090343
P10-3-2JOJ: RNCC: 3 | RNVC: 2
P10-3-2JORJNR: RNCC: 5 | RNVC: 2
12450684-7: RNCC: 5 | RNVC: 2

16 Apr 1986

5975-14-467-4011
Metallic Raceway

144674011
D107-99X24X1,2AG3: RNCC: 3 | RNVC: 2
D107-24X99AG3: RNCC: 5 | RNVC: 2

12 Jan 1994

5975-14-529-4385
Chassis Base

145294385
00 1730 00: RNCC: 3 | RNVC: 2

29 Mar 2002

5975-14-404-8413
Cable Marker Sleeve

144048413
29747515: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-379-5176
Cable Marker Sleeve

143795176
4A1647: RNCC: 3 | RNVC: 2
85-632-9961: RNCC: 6 | RNVC: 9

1 Oct 1982

5975-14-531-0548
Cable Marker Sleeve

145310548
F00143570: RNCC: 3 | RNVC: 2

23 Jul 2002

5975-14-549-9178
Metallic Raceway

145499178
2092146: RNCC: 3 | RNVC: 2

18 May 2006

5975-14-445-4407
Cable Marker Sleeve

144454407
ML1109F00: RNCC: 3 | RNVC: 2

14 Feb 1991

5975-14-513-8896
Metallic Raceway

145138896
21013: RNCC: 3 | RNVC: 2

14 Apr 1999

5975-14-547-1245
Stuffing Tube Plug

145471245
3435: RNCC: 3 | RNVC: 2

27 Sep 2005

5975-14-550-6632
Junction Box

145506632
140-059XMS-002: RNCC: 3 | RNVC: 9

6 Jul 2006

5975-27-058-0094
Nonmetallic Raceway

270580094
50X80 MM: RNCC: 5 | RNVC: 9

29 Nov 2012

5975-14-383-0530
Cable Marker Sleeve

143830530
16899840: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-33-200-2794
Conduit Outlet

332002794
100461030803: RNCC: 3 | RNVC: 2

21 Nov 2001

5975-14-279-9450
Stuffing Tube

142799450
540300: RNCC: 3 | RNVC: 2
BV3L0NG: RNCC: 5 | RNVC: 2
54030: RNCC: 5 | RNVC: 2

1 Jan 1971

5975-14-397-3154
Junction Box

143973154
4DM44: RNCC: 3 | RNVC: 9

1 Dec 1984

5975-14-455-7591
Electrical Clamp

144557591
NAE-151-8: RNCC: 3 | RNVC: 9
NAE151-8: RNCC: 5 | RNVC: 9
141615: RNCC: 5 | RNVC: 9

11 Jun 1992

5975-14-369-9986
Cable Marker Sleeve

143699986
036200500011: RNCC: 3 | RNVC: 2
BBZ2144: RNCC: 5 | RNVC: 2
362050REP1: RNCC: 5 | RNVC: 2
M65BLANCREP1: RNCC: 5 | RNVC: 2
3597470048375: RNCC: 5 | RNVC: 2
362050-01REP1: RNCC: 5 | RNVC: 2

18 May 1981

5975-14-541-5148
Guide Rail

145415148
1091426: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-513-0649
Switch Box Case

145130649
45614235: RNCC: 3 | RNVC: 9

3 Mar 1999

5975-14-483-4173
Nonmetallic Raceway

144834173
DNG100100: RNCC: 3 | RNVC: 2

12 Sep 1996

5975-14-462-6279
Cable Crosshead

144626279
AF1054F02: RNCC: 3 | RNVC: 2

28 Apr 1993

5975-14-452-3857
Cable Collar

144523857
51-60-16-3: RNCC: 3 | RNVC: 2

8 Jan 1992

5975-14-365-8054
Ground Rod

143658054
NO PRIMARY REF14-365-8054: RNCC: 3 | RNVC: 2
8-8M3-2-01: RNCC: 5 | RNVC: 9

8 Oct 1980

5975-14-402-1086
Cable Marker Sleeve

144021086
401597: RNCC: 3 | RNVC: 2
BGE401597: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-440-5030
Cable Marker Sleeve

144405030
20130488: RNCC: 3 | RNVC: 2
20130488: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-436-9067
Cable Marker Sleeve

144369067
BJM08299: RNCC: 3 | RNVC: 2

9 Jan 1990

5975-33-161-5135
Cable Marker Sleeve

331615135
1813: RNCC: 3 | RNVC: 2
321166: RNCC: 5 | RNVC: 2

4 Mar 1994

5975-14-402-1069
Cable Marker Sleeve

144021069
401578: RNCC: 3 | RNVC: 2
BGE401578: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-329-4214
Junction Box

143294214
0077810010: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-270-9094
Cable Marker Sleeve

142709094
204335-1400A: RNCC: 3 | RNVC: 2
7815CXZ5S30KD1400AJ: RNCC: 5 | RNVC: 9

1 Jan 1970

5975-14-383-3013
Cable Marker Sleeve

143833013
24877: RNCC: 3 | RNVC: 2

11 Apr 1983

5975-14-544-3923
Blank Panel

145443923
MOK7V: RNCC: 3 | RNVC: 2
AA009508: RNCC: 6 | RNVC: 9

26 Jan 2005

5975-14-481-1899
Nonmetallic Raceway

144811899
PZE1808ACA01: RNCC: 3 | RNVC: 2
F0028510: RNCC: 5 | RNVC: 9

25 Apr 1996

5975-14-555-7852
Cable Marker Sleeve

145557852
0084102290: RNCC: 3 | RNVC: 2

14 Dec 2007

5975-27-025-9050
Raceway Elbow

270259050
900 40: RNCC: 2 | RNVC: 2
90040: RNCC: 5 | RNVC: 9

29 Apr 2005

5975-27-056-5841
Cable Marker Sleeve

270565841
515034: RNCC: 5 | RNVC: 9

12 Apr 2012

5975-14-489-6238
Cable Hanger

144896238
332A61-3140-20: RNCC: 3 | RNVC: 2

6 Aug 1997

5975-14-470-9088
Cable Marker Sleeve

144709088
735070-01REP0: RNCC: 3 | RNVC: 2
782114012043: RNCC: 5 | RNVC: 2
782114012043: RNCC: 5 | RNVC: 9

13 Jul 1994

5975-14-518-6786
Interconnecting Box

145186786
AAA007-01-A1: RNCC: 3 | RNVC: 2

11 Feb 2000

5975-15-009-2653
Blank Panel

150092653
132-0218-01: RNCC: 3 | RNVC: 2

2 Jan 1980

5975-14-306-0557
Metallic Raceway

143060557
A10-63-403-60-0: RNCC: 3 | RNVC: 2
A10-63-403-60-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-356-2259
Junction Box

143562259
C160-1-77: RNCC: 3 | RNVC: 2

25 Apr 1979

5975-14-509-1128
Cable Marker Sleeve

145091128
10349884: RNCC: 3 | RNVC: 2
212-025BR: RNCC: 5 | RNVC: 9

21 Oct 1998

5975-33-201-4260
Blank Panel

332014260
223581207-01: RNCC: 3 | RNVC: 2

11 Jul 2002

5975-14-349-6734
Junction Box

143496734
6D93SMA1PE3-3PE2: RNCC: 3 | RNVC: 2
6D93SMA1PE33PE2: RNCC: 3 | RNVC: 2

22 May 1978

5975-14-306-0848
Junction Box

143060848
A10-63-438-10-0: RNCC: 3 | RNVC: 2
A10-63-438-10-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-425-4669
Cable Marker Sleeve

144254669
20133071: RNCC: 3 | RNVC: 2
20133071: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-14-270-9093
Cable Marker Sleeve

142709093
204335-1388A: RNCC: 3 | RNVC: 2
7815CXZ5S30KD1388AJ: RNCC: 5 | RNVC: 9

1 Jan 1970

5975-14-415-8733
Interior Cable Rack

144158733
GSM690-003-F1-140X110: RNCC: 3 | RNVC: 2
MAT690-0005REP1-140X110F5ETF15: RNCC: 3 | RNVC: 2
GSM690-002REP1-140X110: RNCC: 5 | RNVC: 2

21 May 1987

5975-14-484-8038
Stuffing Tube

144848038
DE9-PL113044: RNCC: 3 | RNVC: 2
91769750: RNCC: 5 | RNVC: 2
3389110501124: RNCC: 5 | RNVC: 2
DE9PL113044: RNCC: 5 | RNVC: 2
91769750: RNCC: 5 | RNVC: 2

5 Dec 1996

5975-14-362-6069
Cable Marker Sleeve

143626069
03600102015R: RNCC: 3 | RNVC: 2
3597470035719: RNCC: 5 | RNVC: 2
V11REPR: RNCC: 5 | RNVC: 2
360102REPR: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-309-5735
Cable Marker Sleeve

143095735
0084032010: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-309-6666
Access Cover

143096666
121B63-246-50-07: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-331-5346
Junction Box

143315346
GSM524-035REP1: RNCC: 3 | RNVC: 2
A0166-007REP1: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-33-103-5023
Conduit Outlet

331035023
4503: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-14-542-3413
Interconnecting Box

145423413
82025561000: RNCC: 3 | RNVC: 2

8 Jul 2004

5975-14-483-5966
Crossarm Brace

144835966
47134925: RNCC: 3 | RNVC: 2

19 Sep 1996

5975-14-444-6396
Stuffing Tube

144446396
241689: RNCC: 3 | RNVC: 2

16 Jan 1991

5975-33-107-1438
Cable Marker Sleeve

331071438
PCAMI/RP/0300000620: RNCC: 3 | RNVC: 2

30 Jun 1999

5975-14-342-1416
Junction Box

143421416
321A63-2268-010: RNCC: 3 | RNVC: 2
85-688-0854: RNCC: 6 | RNVC: 9

14 Apr 1977

5975-14-536-9911
Metallic Raceway

145369911
5010579475: RNCC: 3 | RNVC: 2
IF-192-0298: RNCC: 5 | RNVC: 9

24 Sep 2003

5975-14-517-7368
Cable Marker Sleeve

145177368
320-318-101-0: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-14-547-0021
Cable Marker Sleeve

145470021
SLP40-25NR: RNCC: 3 | RNVC: 2

13 Sep 2005

5975-14-331-8047
Cable Marker Sleeve

143318047
620-844-227-0: RNCC: 3 | RNVC: 2
620-844-227-0: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-520-3273
Cable Marker Sleeve

145203273
TMS3-32NR13590-9: RNCC: 3 | RNVC: 9

17 May 2000

5975-14-466-9660
Cable Marker Sleeve

144669660
RNF100-1/2-9-20MM-REPP11NOIR: RNCC: 3 | RNVC: 9
91310316: RNCC: 5 | RNVC: 2

9 Dec 1993

5975-14-550-2855
Interconnecting Box

145502855
WW1324F00: RNCC: 3 | RNVC: 2

15 Jun 2006

5975-14-513-9311
Cable Marker Sleeve

145139311
2702-391A552: RNCC: 3 | RNVC: 2

19 Apr 1999

5975-14-359-5168
Conduit Outlet

143595168
29978: RNCC: 3 | RNVC: 2

15 Oct 1979

5975-14-421-2270
Stuffing Tube

144212270
2059916: RNCC: 3 | RNVC: 2

11 Jan 1988

5975-14-428-8416
Interconnecting Box

144288416
20325591: RNCC: 3 | RNVC: 2
20325591: RNCC: 5 | RNVC: 9

22 Dec 1988

5975-33-002-0788
Junction Box Cover

330020788
4061 PG-16: RNCC: 3 | RNVC: 2

15 Aug 1992

5975-14-408-6026
Guy

144086026
DHV1085-30-5: RNCC: 3 | RNVC: 2

2 Apr 1986

5975-14-442-6707
Cable Marker Sleeve

144426707
SLP20-10J0R8NR: RNCC: 3 | RNVC: 2

24 Oct 1990

5975-33-206-0787
Cable Marker Sleeve

332060787
MMN461-1-0: RNCC: 3 | RNVC: 2
2815-33-M22-7826: RNCC: 6 | RNVC: 9

26 Jul 2007

5975-14-254-1175
Cable Marker Sleeve

142541175
352005REPB: RNCC: 3 | RNVC: 2
99044433: RNCC: 5 | RNVC: 2
HELAVIATWIN4REPB: RNCC: 5 | RNVC: 2
99044433: RNCC: 5 | RNVC: 9
99044433: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-031-9580
Cable Marker Sleeve

140319580
73D8N01: RNCC: 3 | RNVC: 2
73D8N01: RNCC: 5 | RNVC: 2

5 Jul 1980

5975-14-517-0381
Conduit Outlet

145170381
231123: RNCC: 3 | RNVC: 2

28 Oct 1999

5975-14-501-6640
Cable Marker Sleeve

145016640
370104-04REP8: RNCC: 3 | RNVC: 2
91633960: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-14-542-5300
Cable Marker Sleeve

145425300
2594-240: RNCC: 3 | RNVC: 2

21 Jul 2004

5975-14-420-7472
Cable Marker Sleeve

144207472
ST400S58P201-090: RNCC: 3 | RNVC: 2
1-090: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-465-8257
Cable Marker Sleeve

144658257
PR119-48302: RNCC: 3 | RNVC: 2

14 Oct 1993

5975-14-343-6801
Cable Marker Sleeve

143436801
ST400S58P205-312: RNCC: 3 | RNVC: 2

13 Jul 1977

5975-14-418-3795
Junction Box

144183795
815229: RNCC: 3 | RNVC: 2
BJ-479A: RNCC: 6 | RNVC: 9

14 Aug 1987

5975-15-156-8904
Electrical Rosette

151568904
3OT XSOT-32: RNCC: 3 | RNVC: 2

10 Mar 2003

5975-14-445-4252
Junction Box

144454252
330A68-7031-00: RNCC: 3 | RNVC: 2

14 Feb 1991

5975-14-425-9019
Cable Marker Sleeve

144259019
BAZ10987: RNCC: 3 | RNVC: 2

28 Jul 1988

5975-14-296-4532
Junction Box

142964532
18012453: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-512-2381
Crossarm Brace

145122381
3BT02331AAAA: RNCC: 3 | RNVC: 2

8 Feb 1999

5975-14-425-4626
Cable Marker Sleeve

144254626
20130281: RNCC: 3 | RNVC: 2
20130281: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-14-521-5358
Junction Box Cover

145215358
39983016: RNCC: 3 | RNVC: 2
GS1-AP33: RNCC: 3 | RNVC: 2
C046865: RNCC: 5 | RNVC: 2

9 Aug 2000

5975-33-201-5555
Blank Panel

332015555
223591106-01: RNCC: 3 | RNVC: 2

3 Sep 2002

5975-14-421-4759
Cable Marker Sleeve

144214759
320-139-401-0: RNCC: 3 | RNVC: 2

14 Jan 1988

5975-14-413-4436
Junction Box

144134436
1771A102: RNCC: 3 | RNVC: 2
85-693-1765: RNCC: 6 | RNVC: 9

16 Dec 1986

5975-14-464-7679
Interconnecting Box

144647679
365A61-5051-00: RNCC: 3 | RNVC: 2

1 Sep 1993

5975-14-416-7286
Cable Marker Sleeve

144167286
HT20-25BA12-011: RNCC: 3 | RNVC: 2
2-011: RNCC: 5 | RNVC: 2

25 Jun 1987

5975-14-433-1234
Cable Marker Sleeve

144331234
352014-07: RNCC: 3 | RNVC: 2

11 Jul 1989

5975-14-480-2433
Chassis Base

144802433
27-06105-400-01: RNCC: 3 | RNVC: 2
2706 105 40001: RNCC: 5 | RNVC: 2

28 Feb 1996

5975-14-470-0076
Interconnecting Box

144700076
S1011-OM83: RNCC: 3 | RNVC: 9
91604366: RNCC: 5 | RNVC: 2

25 May 1994

5975-14-485-2309
Interior Cable Rack

144852309
421306: RNCC: 3 | RNVC: 2
421306: RNCC: 5 | RNVC: 2
421306: RNCC: 5 | RNVC: 2

13 Jan 1997

5975-14-342-0074
Interior Cable Rack

143420074
C90D108SZ195: RNCC: 3 | RNVC: 2
102085: RNCC: 3 | RNVC: 9
C90D108SZ195: RNCC: 5 | RNVC: 2
C90D1085Z195: RNCC: 5 | RNVC: 2
C90D108SZ195: RNCC: 5 | RNVC: 9
C90D1085Z195: RNCC: 5 | RNVC: 9

14 Apr 1977

5975-33-103-5036
Conduit Outlet

331035036
5015-C: RNCC: 3 | RNVC: 2

24 Apr 1995

5975-14-370-8496
Junction Box

143708496
20686868-5: RNCC: 3 | RNVC: 2
LHJ0-10: RNCC: 5 | RNVC: 2

5 Jun 1981

5975-14-306-0880
Metallic Raceway

143060880
A10-63-463-30-1: RNCC: 3 | RNVC: 2
A10-63-463-30-1: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-545-9398
Cable Marker Sleeve

145459398
037401200043: RNCC: 3 | RNVC: 2
037401200043: RNCC: 5 | RNVC: 2
6070-GT-0000081: RNCC: 5 | RNVC: 9

30 May 2005

5975-14-319-5597
Stuffing Tube Plug

143195597
GSM426-07F18: RNCC: 3 | RNVC: 2
000EL013REP18-4: RNCC: 5 | RNVC: 2

1 Jan 1975

5975-14-499-0389
Cable Marker Sleeve

144990389
12450286-0: RNCC: 3 | RNVC: 2
P12-6NR: RNCC: 3 | RNVC: 2
F300 0T 016 2023: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-402-2430
Conduit Outlet

144022430
972-0-32-01: RNCC: 3 | RNVC: 2

26 Jun 1985

5975-14-527-9519
Cable Marker Sleeve

145279519
0353-0041-001REPG: RNCC: 3 | RNVC: 2

5 Dec 2001

5975-14-402-6132
Cable Marker Sleeve

144026132
TMSNR501NBLANC: RNCC: 3 | RNVC: 9
12451246-5: RNCC: 5 | RNVC: 2

19 Jul 1985

5975-14-449-5752
Cable Marker Sleeve

144495752
03640002004H: RNCC: 3 | RNVC: 2
364002REPH: RNCC: 5 | RNVC: 2
3597470050262: RNCC: 5 | RNVC: 2

27 Aug 1991

5975-14-471-4759
Raceway Cover

144714759
547050: RNCC: 3 | RNVC: 2

31 Aug 1994

5975-14-528-3390
Cable Marker Sleeve

145283390
1-140441-2: RNCC: 3 | RNVC: 2

23 Jan 2002

5975-14-445-0397
Cable Marker Sleeve

144450397
2-042: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-309-6695
Access Cover

143096695
121S63-237-50-0: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-426-4895
Cable Marker Sleeve

144264895
WBS5-9: RNCC: 3 | RNVC: 2

1 Sep 1988

5975-14-457-6849
Cable Collar

144576849
1-00402050: RNCC: 3 | RNVC: 2

15 Sep 1992

5975-27-012-5423
Ground Rod

270125423
15106150: RNCC: 2 | RNVC: 1

8 Feb 2002

5975-14-339-4419
Cable Marker Sleeve

143394419
620-844-265-0: RNCC: 3 | RNVC: 2
620-844-265-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-33-200-4101
Cable Marker Sleeve

332004101
Q 314 196 312: RNCC: 3 | RNVC: 2

22 Jan 2002

5975-27-056-5736
Cable Marker Sleeve

270565736
517045: RNCC: 5 | RNVC: 9

11 Apr 2012

5975-14-410-6567
Junction Box

144106567
400291: RNCC: 3 | RNVC: 2
BGE400291: RNCC: 5 | RNVC: 2

9 Jul 1986

5975-14-254-1113
Cable Marker Sleeve

142541113
352001REPT: RNCC: 3 | RNVC: 2
HELAVIATWIN0REPT: RNCC: 5 | RNVC: 2

1 Jan 1969

5975-14-503-9792
Cable Hanger

145039792
075552: RNCC: 3 | RNVC: 2

4 Feb 1998

5975-14-532-8094
Interconnecting Box

145328094
56093327-040: RNCC: 3 | RNVC: 2
56093327: RNCC: 5 | RNVC: 2

17 Dec 2002

5975-14-445-0394
Cable Marker Sleeve

144450394
2-036: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-370-7790
Interior Cable Rack

143707790
83550: RNCC: 3 | RNVC: 2

5 Jun 1981

5975-14-456-9762
Cable Marker Sleeve

144569762
0702-006A001: RNCC: 3 | RNVC: 2
0702-006A001: RNCC: 5 | RNVC: 2

30 Jul 1992

Load More Results