What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 126 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 126of 491

5975-14-387-0655
Junction Box

143870655
92022: RNCC: 3 | RNVC: 2
92222: RNCC: 3 | RNVC: 2
304-6784: RNCC: 5 | RNVC: 2
92022: RNCC: 5 | RNVC: 2
5000459189: RNCC: 5 | RNVC: 2
87000556: RNCC: 5 | RNVC: 2
5315082: RNCC: 5 | RNVC: 9
LG92222: RNCC: 5 | RNVC: 9

24 Aug 1983

5975-14-530-4306
Junction Box

145304306
BJ3310-0201: RNCC: 3 | RNVC: 2

12 Jun 2002

5975-14-542-1455
Metallic Raceway

145421455
012143: RNCC: 3 | RNVC: 2
PROCS1000: RNCC: 5 | RNVC: 2
SC086488: RNCC: 6 | RNVC: 9

8 Jul 2004

5975-14-527-1746
Guide Rail

145271746
001751 115 00: RNCC: 3 | RNVC: 2
001751-115-00: RNCC: 5 | RNVC: 2

10 Oct 2001

5975-14-361-6385
Conduit Outlet

143616385
04105: RNCC: 3 | RNVC: 2
252-6122: RNCC: 5 | RNVC: 2
4105: RNCC: 5 | RNVC: 2

20 Feb 1980

5975-14-378-4139
Junction Box

143784139
366A67-2081-00: RNCC: 3 | RNVC: 2

7 Mar 1996

5975-14-480-9113
Guide Rail

144809113
67-0006-013: RNCC: 3 | RNVC: 2

11 Apr 1996

5975-14-449-5756
Cable Marker Sleeve

144495756
03640002004K: RNCC: 3 | RNVC: 2
3597470050293: RNCC: 5 | RNVC: 2
364002REPK: RNCC: 5 | RNVC: 2

27 Aug 1991

5975-14-348-2475
Blank Panel

143482475
CPRP5004: RNCC: 3 | RNVC: 2

29 Mar 1978

5975-14-409-8414
Junction Box

144098414
20328369: RNCC: 3 | RNVC: 2

4 Jun 1986

5975-14-453-5719
Cable Marker Sleeve

144535719
BAZ9655: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-27-019-6416
Nonmetallic Raceway

270196416
05001HK0253: RNCC: 2 | RNVC: 1
05001HK0253: RNCC: 5 | RNVC: 9

15 Nov 2003

5975-14-517-7372
Cable Marker Sleeve

145177372
320-318-001-0: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-33-200-0856
Interconnecting Box

332000856
7054.592.0560: RNCC: 3 | RNVC: 2
2510701204: RNCC: 5 | RNVC: 2

5 Oct 2001

5975-14-292-6037
Junction Box

142926037
R280874: RNCC: 3 | RNVC: 2
R60740: RNCC: 5 | RNVC: 2

1 Jan 1972

5975-33-200-3810
Junction Box

332003810
383 0804-801: RNCC: 3 | RNVC: 2

22 Jan 2002

5975-14-362-5990
Cable Marker Sleeve

143625990
036002010035: RNCC: 3 | RNVC: 2
V09REP5: RNCC: 5 | RNVC: 2
3597470040263: RNCC: 5 | RNVC: 2
360101REP5: RNCC: 5 | RNVC: 2
360201REP5: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-393-8918
Nonmetallic Raceway

143938918
366A87-1001-6502: RNCC: 3 | RNVC: 2

23 Jun 1984

5975-14-469-7899
Interconnecting Box

144697899
45-0434: RNCC: 3 | RNVC: 2

10 May 1994

5975-14-388-2798
Interconnecting Box

143882798
M4ZS500D5153: RNCC: 3 | RNVC: 2

3 Nov 1983

5975-14-483-6714
Guide Rail

144836714
38427562: RNCC: 3 | RNVC: 2

27 Sep 1996

5975-14-473-9107
Junction Box

144739107
02565: RNCC: 3 | RNVC: 2
2565: RNCC: 5 | RNVC: 2

18 Jan 1995

5975-14-460-3321
Junction Box

144603321
318043: RNCC: 3 | RNVC: 2
318043: RNCC: 5 | RNVC: 9

21 Jan 1993

5975-27-038-7391
Junction Box Cover

270387391
4566232143: RNCC: 2 | RNVC: 1

30 Oct 2007

5975-14-422-2551
Push Button

144222551
16932292: RNCC: 3 | RNVC: 2

24 Feb 1988

5975-14-238-2693
Cable Marker Sleeve

142382693
035200030042: RNCC: 3 | RNVC: 2
99001655: RNCC: 5 | RNVC: 2
352-03REP2: RNCC: 5 | RNVC: 2
HELAVIATWIN2REP2: RNCC: 5 | RNVC: 2
352003REP2: RNCC: 5 | RNVC: 2
99001655: RNCC: 5 | RNVC: 2
99001655: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-545-9416
Cable Marker Sleeve

145459416
037401400044: RNCC: 3 | RNVC: 2
037401400044: RNCC: 5 | RNVC: 2
6070-GT-0000089: RNCC: 5 | RNVC: 9

30 May 2005

5975-27-029-6806
Chassis Base

270296806
9BM 4510-00011: RNCC: 2 | RNVC: 1

1 May 2006

5975-14-529-4559
Chassis Base

145294559
4440701720: RNCC: 3 | RNVC: 2

29 Mar 2002

5975-14-550-2856
Interconnecting Box

145502856
WW1326F00: RNCC: 3 | RNVC: 2

15 Jun 2006

5975-14-512-4986
Guide Rail

145124986
RB203: RNCC: 3 | RNVC: 2

17 Feb 1999

5975-14-298-9389
Stuffing Tube

142989389
331691: RNCC: 3 | RNVC: 2
331691: RNCC: 5 | RNVC: 9

1 Jan 1973

5975-14-485-2308
Interior Cable Rack

144852308
421286: RNCC: 3 | RNVC: 2
421286: RNCC: 5 | RNVC: 2
421286: RNCC: 5 | RNVC: 2

13 Jan 1997

5975-14-460-9568
Cable Collar

144609568
V27-9: RNCC: 3 | RNVC: 2

17 Feb 1993

5975-14-453-5750
Cable Marker Sleeve

144535750
BAZ9688: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-476-8279
Stuffing Tube

144768279
96110739: RNCC: 3 | RNVC: 2
RAR4727: RNCC: 5 | RNVC: 2

5 Jul 1995

5975-14-339-4405
Cable Marker Sleeve

143394405
620-844-154-0: RNCC: 3 | RNVC: 2
620-844-154-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-462-4368
Cable Hanger

144624368
LN400 019REPC2: RNCC: 3 | RNVC: 2

20 Apr 1993

5975-14-526-6633
Stuffing Tube

145266633
224074: RNCC: 3 | RNVC: 2

17 Aug 2001

5975-14-448-5232
Metallic Raceway

144485232
07501: RNCC: 3 | RNVC: 2
3303430075011: RNCC: 5 | RNVC: 2

26 Jun 1991

5975-14-285-5529
Junction Box Cover

142855529
8091P81011: RNCC: 3 | RNVC: 2

1 Jan 1972

5975-14-338-6688
Junction Box

143386688
70151: RNCC: 3 | RNVC: 2

17 Dec 1976

5975-14-402-6128
Cable Marker Sleeve

144026128
TMSNR501IBLANC: RNCC: 3 | RNVC: 9
12451242-3: RNCC: 5 | RNVC: 2

19 Jul 1985

5975-14-517-7336
Cable Marker Sleeve

145177336
320-318-201-0: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-15-111-3082
Blank Panel

151113082
173-0355/01: RNCC: 3 | RNVC: 2

16 Nov 1990

5975-14-333-2623
Cable Collar

143332623
15159619: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-254-1172
Cable Marker Sleeve

142541172
03520004004Y: RNCC: 3 | RNVC: 2
352004REPY: RNCC: 5 | RNVC: 2
HELAVIATWIN3REPY: RNCC: 5 | RNVC: 2

1 Jan 1969

5975-14-512-0095
Cable Marker Sleeve

145120095
TR402040: RNCC: 3 | RNVC: 2
0051432: RNCC: 3 | RNVC: 2

2 Feb 1999

5975-33-108-5427
Junction Box

331085427
9644.590.0034: RNCC: 3 | RNVC: 2
2510901291: RNCC: 5 | RNVC: 2
2510901291: RNCC: 5 | RNVC: 2

16 Apr 2001

5975-14-449-5774
Cable Marker Sleeve

144495774
03640002004X: RNCC: 3 | RNVC: 2
3597470050484: RNCC: 5 | RNVC: 2
364002REPX: RNCC: 5 | RNVC: 2

27 Aug 1991

5975-14-416-0520
Junction Box

144160520
BJM00960: RNCC: 3 | RNVC: 2

3 Jun 1987

5975-14-539-5784
Junction Box

145395784
10667975000: RNCC: 3 | RNVC: 2

22 Jan 2004

5975-14-393-5265
Cable Marker Sleeve

143935265
360110REPH: RNCC: 3 | RNVC: 2
HOI85-4RO-H: RNCC: 3 | RNVC: 2
V65REPH: RNCC: 5 | RNVC: 2
H0I85H: RNCC: 5 | RNVC: 2

7 Apr 1984

5975-14-441-6229
Stuffing Tube

144416229
1013-60: RNCC: 3 | RNVC: 2

5 Sep 1990

5975-14-402-1118
Cable Marker Sleeve

144021118
401629: RNCC: 3 | RNVC: 2
BGE401629: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-326-0284
Stuffing Tube

143260284
NO PRIMARY REF14-326-0284: RNCC: 3 | RNVC: 2
0-1453: RNCC: 5 | RNVC: 2
01814160: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-14-446-5842
Junction Box

144465842
2512A: RNCC: 3 | RNVC: 2

2 Apr 1991

5975-14-404-7266
Cable Marker Sleeve

144047266
39049070: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-254-1100
Cable Marker Sleeve

142541100
352001REPG: RNCC: 3 | RNVC: 2
99044184: RNCC: 5 | RNVC: 2
HELAVIATWIN0REPG: RNCC: 5 | RNVC: 2
99044184: RNCC: 5 | RNVC: 9
99044184: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-326-6570
Junction Box

143266570
5DP55S6PE2: RNCC: 3 | RNVC: 2
5DS2: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-345-7222
Blank Panel

143457222
20022: RNCC: 3 | RNVC: 2
520864G0011: RNCC: 5 | RNVC: 2

5 Oct 1977

5975-14-425-4666
Cable Marker Sleeve

144254666
20133068: RNCC: 3 | RNVC: 2
20133068: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-15-204-8158
Junction Box

152048158
02296: RNCC: 3 | RNVC: 2
(241)A101102296: RNCC: 5 | RNVC: 2

11 Jan 2012

5975-14-505-2957
Blank Panel

145052957
35.2.483.0003: RNCC: 3 | RNVC: 2

18 Mar 1998

5975-14-349-9495
Cable Marker Sleeve

143499495
22349416-3: RNCC: 3 | RNVC: 2

14 Jun 1978

5975-14-480-9114
Guide Rail

144809114
67-0006-014: RNCC: 3 | RNVC: 2

11 Apr 1996

5975-14-499-4352
Cable Marker Sleeve

144994352
5600023-060246-000-0-10: RNCC: 3 | RNVC: 2
5600023-060246.000.0-10: RNCC: 5 | RNVC: 2
F300 0T 022 0890: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-384-3613
Push Button

143843613
BMC1-1-010N: RNCC: 3 | RNVC: 9

4 May 1983

5975-14-404-7325
Cable Marker Sleeve

144047325
39210561: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-031-9070
Cable Marker Sleeve

140319070
GCM7BAL20: RNCC: 3 | RNVC: 2

5 Jul 1980

5975-14-420-0551
Cable Marker Sleeve

144200551
BJM08970: RNCC: 3 | RNVC: 2

18 Nov 1987

5975-14-285-0151
Stuffing Tube

142850151
1367470: RNCC: 3 | RNVC: 2
3102128: RNCC: 5 | RNVC: 2

1 Jan 1972

5975-14-428-8250
Nonmetallic Raceway

144288250
82211: RNCC: 3 | RNVC: 2
83551: RNCC: 5 | RNVC: 2
5041579: RNCC: 5 | RNVC: 9

22 Dec 1988

5975-14-449-5758
Cable Marker Sleeve

144495758
03640002004L: RNCC: 3 | RNVC: 2
3597470050309: RNCC: 5 | RNVC: 2
364002REPL: RNCC: 5 | RNVC: 2

27 Aug 1991

5975-14-524-4815
Cable Marker Sleeve

145244815
208808: RNCC: 3 | RNVC: 2

21 Mar 2001

5975-14-444-6459
Blank Panel

144446459
90DD231001: RNCC: 3 | RNVC: 2

16 Jan 1991

5975-14-512-4996
Guide Rail

145124996
RB205: RNCC: 3 | RNVC: 2

17 Feb 1999

5975-14-413-0789
Junction Box

144130789
BA17050: RNCC: 3 | RNVC: 2
229878: RNCC: 5 | RNVC: 2

26 Nov 1986

5975-14-395-0736
Cable Marker Sleeve

143950736
D51900-7: RNCC: 3 | RNVC: 2
D51900-7: RNCC: 5 | RNVC: 2

2 Oct 1984

5975-14-505-6851
Interconnecting Box

145056851
326300B37437: RNCC: 3 | RNVC: 2
0235: RNCC: 3 | RNVC: 2

26 Mar 1998

5975-14-546-0217
Interconnecting Box

145460217
YSV1893: RNCC: 3 | RNVC: 2
SYQ5701: RNCC: 5 | RNVC: 2

6 Jun 2005

5975-14-324-1781
Junction Box Cover

143241781
701EQ0099F20REP32: RNCC: 3 | RNVC: 2
701EQ099REP32: RNCC: 5 | RNVC: 2

1 Jan 1975

5975-14-506-8694
Interconnecting Box

145068694
0-0142180-2: RNCC: 3 | RNVC: 2

27 May 1998

5975-15-153-3966
Blank Panel

151533966
5137-392-04: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-14-368-5640
Cable Marker Sleeve

143685640
362007-03REP5: RNCC: 3 | RNVC: 2
M50VERTREP5: RNCC: 5 | RNVC: 2
H085-6VR5: RNCC: 5 | RNVC: 9

20 Feb 1981

5975-33-001-1813
Stuffing Tube

330011813
35-63071-1301: RNCC: 3 | RNVC: 2

24 Oct 1989

5975-14-528-4932
Interconnecting Box

145284932
91781: RNCC: 3 | RNVC: 2

30 Jan 2002

5975-14-505-4829
Interconnecting Box

145054829
41021042: RNCC: 3 | RNVC: 2

18 Mar 1998

5975-14-509-1173
Interconnecting Box

145091173
JVJT210001: RNCC: 3 | RNVC: 2

21 Oct 1998

5975-14-520-1704
Cable Marker Sleeve

145201704
39256610: RNCC: 3 | RNVC: 9

17 May 2000

5975-14-309-5743
Cable Marker Sleeve

143095743
0084033560: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-291-5412
Stuffing Tube

142915412
500600: RNCC: 3 | RNVC: 2
50060: RNCC: 5 | RNVC: 2
BV6: RNCC: 5 | RNVC: 2
BV6MARINEC: RNCC: 5 | RNVC: 2

1 Jan 1972

5975-14-475-6454
Switch Box Case

144756454
624740: RNCC: 3 | RNVC: 2

24 Apr 1995

5975-14-467-1985
Cable Marker Sleeve

144671985
TRSA1040B1C: RNCC: 3 | RNVC: 9
TRSA1040B1C: RNCC: 5 | RNVC: 2

21 Dec 1993

5975-14-554-5989
Cable Marker Sleeve

145545989
0084303030: RNCC: 3 | RNVC: 2

24 Jul 2007

5975-14-031-9579
Cable Marker Sleeve

140319579
73D8M01: RNCC: 3 | RNVC: 2
73D8M01: RNCC: 5 | RNVC: 2

5 Jul 1980

5975-14-370-2284
Cable Marker Sleeve

143702284
0294740040: RNCC: 3 | RNVC: 2
302-303-401P: RNCC: 5 | RNVC: 2

18 May 1981

5975-14-469-5306
Interconnecting Box

144695306
22343733-3: RNCC: 3 | RNVC: 2

27 Apr 1994

5975-33-161-6968
Conduit Outlet

331616968
920 10: RNCC: 3 | RNVC: 2

20 Jul 1995

5975-14-476-0902
Cable Hanger

144760902
222-3121-333: RNCC: 3 | RNVC: 2

17 May 1995

5975-33-107-3553
Stuffing Tube

331073553
731559: RNCC: 3 | RNVC: 2

27 Sep 1999

5975-14-405-3418
Junction Box

144053418
611105938: RNCC: 3 | RNVC: 2

27 Nov 1985

5975-14-404-8417
Cable Marker Sleeve

144048417
29747519: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-254-1076
Cable Marker Sleeve

142541076
035200010048: RNCC: 3 | RNVC: 2
352011REP8: RNCC: 5 | RNVC: 2
352001REP8: RNCC: 5 | RNVC: 2
3597470256923: RNCC: 5 | RNVC: 2
HELAVIATWIN0REP8: RNCC: 5 | RNVC: 2
99001651: RNCC: 5 | RNVC: 2
352-01REP8: RNCC: 5 | RNVC: 2
99001651: RNCC: 5 | RNVC: 9
99001651: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-485-4545
Interconnecting Box

144854545
434330: RNCC: 3 | RNVC: 2
434330-001: RNCC: 5 | RNVC: 9
KE*605: RNCC: 5 | RNVC: 9

23 Jan 1997

5975-27-056-5815
Cable Marker Sleeve

270565815
515045: RNCC: 5 | RNVC: 9

12 Apr 2012

5975-14-254-1097
Cable Marker Sleeve

142541097
352001REPD: RNCC: 3 | RNVC: 2
99008738: RNCC: 5 | RNVC: 2
HELAVIATWIN0REPD: RNCC: 5 | RNVC: 2
99008738: RNCC: 5 | RNVC: 9
99008738: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-501-8702
Junction Box

145018702
18D108: RNCC: 3 | RNVC: 2

17 Nov 1997

5975-14-326-6564
Junction Box

143266564
12D145: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-549-8273
Metallic Raceway

145498273
31101188: RNCC: 3 | RNVC: 2

16 May 2006

5975-14-254-1170
Cable Marker Sleeve

142541170
03520004004W: RNCC: 3 | RNVC: 2
352004REPW: RNCC: 5 | RNVC: 2
99026315: RNCC: 5 | RNVC: 2
RAR4647: RNCC: 5 | RNVC: 2
HELAVIATWIN3REPW: RNCC: 5 | RNVC: 2
99026315: RNCC: 5 | RNVC: 9
99026315: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-356-9352
Cable Marker Sleeve

143569352
03600108015K: RNCC: 3 | RNVC: 2
360108REPK: RNCC: 5 | RNVC: 2
V50REPK: RNCC: 5 | RNVC: 2
3597470038260: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-392-8015
Junction Box

143928015
5000901531: RNCC: 3 | RNVC: 2

7 Apr 1984

5975-14-369-9989
Cable Marker Sleeve

143699989
03620050001P: RNCC: 3 | RNVC: 2
3597470048214: RNCC: 5 | RNVC: 2
362050-01REPP: RNCC: 5 | RNVC: 2
362050REPP: RNCC: 5 | RNVC: 2
M65BLANCREPP: RNCC: 5 | RNVC: 2
M65REPP: RNCC: 5 | RNVC: 2
BBZ2233: RNCC: 5 | RNVC: 2
AA002115: RNCC: 6 | RNVC: 9

18 May 1981

5975-14-505-6601
Switch Box Case

145056601
E28003200000: RNCC: 3 | RNVC: 2

26 Mar 1998

5975-27-046-8610
Blank Panel

270468610
104-30-0044-01: RNCC: 2 | RNVC: 1

16 Oct 2009

5975-14-384-6821
Junction Box

143846821
16766578: RNCC: 3 | RNVC: 2
16766578: RNCC: 5 | RNVC: 9

2 Jun 1983

5975-14-548-2597
Metallic Raceway

145482597
21168: RNCC: 3 | RNVC: 2

19 Dec 2005

5975-14-543-3253
Junction Box

145433253
10623163: RNCC: 3 | RNVC: 2

20 Oct 2004

5975-14-285-0139
Blank Panel

142850139
1360720: RNCC: 3 | RNVC: 2
3360720: RNCC: 5 | RNVC: 2
KAU404: RNCC: 5 | RNVC: 2

1 Jan 1972

5975-14-322-8869
Cable Marker Sleeve

143228869
0084052610: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-402-1072
Cable Marker Sleeve

144021072
401581: RNCC: 3 | RNVC: 2
BGE401581: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-326-6565
Junction Box

143266565
18D145: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-467-7856
Cable Crosshead

144677856
AF1054F01: RNCC: 3 | RNVC: 2

27 Jan 1994

5975-15-178-4215
Blank Panel

151784215
3DB03010AA**: RNCC: 3 | RNVC: 2

31 May 2005

5975-27-016-9405
Metallic Raceway

270169405
4T42-150SA: RNCC: 2 | RNVC: 1
4T42-150SA: RNCC: 2 | RNVC: 1

15 Apr 2003

5975-14-513-8882
Interconnecting Box

145138882
8JD002288: RNCC: 3 | RNVC: 2
HEL8JD002288: RNCC: 5 | RNVC: 9

14 Apr 1999

5975-14-460-6538
Junction Box

144606538
45683136: RNCC: 3 | RNVC: 2

4 Feb 1993

5975-14-404-8444
Cable Marker Sleeve

144048444
29747546: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-404-8379
Cable Marker Sleeve

144048379
29747479: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-457-7406
Conduit Outlet

144577406
411900: RNCC: 3 | RNVC: 2

17 Sep 1992

5975-14-466-9608
Cable Collar

144669608
1554470: RNCC: 3 | RNVC: 2
1554470: RNCC: 5 | RNVC: 2

9 Dec 1993

5975-15-187-3264
Drive Ring

151873264
0010863: RNCC: 3 | RNVC: 2
(241)A32450010863: RNCC: 5 | RNVC: 2

16 Mar 2009

5975-14-354-9467
Fanning Strip

143549467
497533G0001: RNCC: 3 | RNVC: 2

20 Feb 1979

5975-14-440-7834
Insulator Pin

144407834
16039805: RNCC: 3 | RNVC: 2

25 Jul 1990

5975-14-353-9947
Cable Marker Sleeve

143539947
0294701180: RNCC: 3 | RNVC: 2
620-857-297-0: RNCC: 5 | RNVC: 2
302-301-301-0: RNCC: 5 | RNVC: 2
302-301-301P: RNCC: 5 | RNVC: 2

16 Jan 1979

5975-15-187-0867
Blank Panel

151870867
143-4091/01: RNCC: 3 | RNVC: 2

11 Feb 2009

5975-14-460-0019
Junction Box

144600019
815-1-93-725: RNCC: 3 | RNVC: 2

7 Jan 1993

5975-14-040-5042
Interior Cable Rack

140405042
95412-0145: RNCC: 3 | RNVC: 2
95-412-0145: RNCC: 5 | RNVC: 2

1 Jan 1972

5975-14-520-3020
Interconnecting Box

145203020
50000337: RNCC: 3 | RNVC: 2

17 May 2000

5975-14-365-8830
Stuffing Tube

143658830
16006110: RNCC: 3 | RNVC: 2

4 Nov 1980

5975-14-356-9245
Cable Marker Sleeve

143569245
03600105015L: RNCC: 3 | RNVC: 2
3597470036952: RNCC: 5 | RNVC: 2
360105REPL: RNCC: 5 | RNVC: 2
V27REPL: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-518-6365
Interconnecting Box

145186365
7701996091: RNCC: 3 | RNVC: 2

9 Feb 2000

5975-14-513-8777
Interconnecting Box

145138777
648292: RNCC: 3 | RNVC: 2

14 Apr 1999

5975-14-428-8432
Interconnecting Box

144288432
16456655: RNCC: 3 | RNVC: 2

22 Dec 1988

5975-14-453-5808
Cable Marker Sleeve

144535808
BAZ11726: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-438-6597
Stuffing Tube

144386597
08000113: RNCC: 3 | RNVC: 2
91540068: RNCC: 5 | RNVC: 2

28 Mar 1990

5975-14-445-4405
Cable Marker Sleeve

144454405
ML1108F00: RNCC: 3 | RNVC: 2

14 Feb 1991

5975-33-002-3260
Blank Panel

330023260
115.22.02: RNCC: 3 | RNVC: 2

22 Aug 1994

5975-14-402-1122
Cable Marker Sleeve

144021122
401633: RNCC: 3 | RNVC: 2
BGE401633: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-323-3014
Junction Box Cover

143233014
R33945SMREP2: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-466-0706
Cable Marker Sleeve

144660706
PR182-48302: RNCC: 3 | RNVC: 2

27 Oct 1993

5975-14-465-8263
Cable Marker Sleeve

144658263
PR165-48302: RNCC: 3 | RNVC: 2

14 Oct 1993

5975-14-511-2111
Interconnecting Box

145112111
21653694-1: RNCC: 3 | RNVC: 2

9 Dec 1998

5975-14-453-5766
Cable Marker Sleeve

144535766
BAZ9445: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-254-1115
Cable Marker Sleeve

142541115
352001REPV: RNCC: 3 | RNVC: 2
91311668: RNCC: 5 | RNVC: 2
99042457: RNCC: 5 | RNVC: 2
HELAVIATWIN0REPV: RNCC: 5 | RNVC: 2
91311668: RNCC: 5 | RNVC: 9
99042457: RNCC: 5 | RNVC: 9
91311668: RNCC: 5 | RNVC: 9
99042457: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-453-1010
Conduit Outlet

144531010
15111300B: RNCC: 3 | RNVC: 2

5 Feb 1992

5975-14-515-9677
Interconnecting Box

145159677
10558569: RNCC: 3 | RNVC: 2

1 Sep 1999

5975-14-515-1919
Interconnecting Box

145151919
920777: RNCC: 3 | RNVC: 2
92077: RNCC: 5 | RNVC: 9

13 Jul 1999

5975-14-408-3117
Stuffing Tube

144083117
91-52-80288: RNCC: 3 | RNVC: 2

19 Mar 1986

5975-14-349-3489
Runner

143493489
16398852: RNCC: 3 | RNVC: 2
16398852: RNCC: 3 | RNVC: 9

22 May 1978

5975-14-402-9271
Cable Marker Sleeve

144029271
TRSA1014C2-01: RNCC: 3 | RNVC: 9

25 Jul 1985

5975-14-554-8414
Stuffing Tube

145548414
500400: RNCC: 3 | RNVC: 2

30 Aug 2007

5975-14-482-3776
Nonmetallic Raceway

144823776
MC400PE: RNCC: 3 | RNVC: 2

11 Jul 1996

5975-14-485-2134
Junction Box

144852134
03122009/M237: RNCC: 3 | RNVC: 2

10 Jan 1997

5975-14-463-2969
Conduit Outlet

144632969
441908K: RNCC: 3 | RNVC: 2

8 Jun 1993

5975-14-356-9286
Cable Marker Sleeve

143569286
03600106015Q: RNCC: 3 | RNVC: 2
3597470037461: RNCC: 5 | RNVC: 2
360106REPQ: RNCC: 5 | RNVC: 2
V37REPQ: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-356-9241
Cable Marker Sleeve

143569241
03600105015H: RNCC: 3 | RNVC: 2
3597470036914: RNCC: 5 | RNVC: 2
360105REPH: RNCC: 5 | RNVC: 2
V27REPH: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-498-6906
Interconnecting Box

144986906
5010480847: RNCC: 3 | RNVC: 2
5010135363: RNCC: 5 | RNVC: 2
5000789456: RNCC: 5 | RNVC: 9
5010135563: RNCC: 5 | RNVC: 9
F300 0T 007 7934: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-365-3224
Access Cover

143653224
A11A672310310N1: RNCC: 3 | RNVC: 2

19 Sep 1980

5975-14-425-4676
Cable Marker Sleeve

144254676
29366563: RNCC: 3 | RNVC: 2
29366563: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-14-480-4711
Stuffing Tube

144804711
180600: RNCC: 3 | RNVC: 2
1013-180600: RNCC: 5 | RNVC: 2

13 Mar 1996

5975-14-353-5197
Cable Collar

143535197
811002-11: RNCC: 3 | RNVC: 2
VDP4048: RNCC: 5 | RNVC: 2

16 Jan 1979

5975-14-329-6056
Chassis Base

143296056
V2PT1705-109056: RNCC: 3 | RNVC: 2
109056: RNCC: 5 | RNVC: 2
V2PT1705-109056: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-402-1124
Cable Marker Sleeve

144021124
401635: RNCC: 3 | RNVC: 2
BGE401635: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-454-0982
Blank Panel

144540982
16661661: RNCC: 3 | RNVC: 2

19 Mar 1992

5975-14-355-6644
Conduit Outlet

143556644
DPD01: RNCC: 3 | RNVC: 2

19 Mar 1979

5975-14-404-8445
Cable Marker Sleeve

144048445
29747547: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-544-5224
Nonmetallic Raceway

145445224
64541: RNCC: 3 | RNVC: 2
INFRA+64541: RNCC: 5 | RNVC: 2
AA003128: RNCC: 6 | RNVC: 9

8 Feb 2005

5975-14-474-2943
Metallic Raceway

144742943
20712101: RNCC: 3 | RNVC: 2

8 Feb 1995

5975-14-254-1164
Cable Marker Sleeve

142541164
03520004004Q: RNCC: 3 | RNVC: 2
HELAVIATWIN3REPQ: RNCC: 5 | RNVC: 2
352004REPQ: RNCC: 5 | RNVC: 2

1 Jan 1969

5975-14-428-4813
Cable Marker Sleeve

144284813
TRSA1014C1D: RNCC: 3 | RNVC: 2
TRSA1014C1D: RNCC: 5 | RNVC: 9

8 Dec 1988

5975-14-459-1443
Cable Marker Sleeve

144591443
39211676: RNCC: 3 | RNVC: 2

19 Nov 1992

5975-14-454-1006
Interconnecting Box

144541006
39956820: RNCC: 3 | RNVC: 9

19 Mar 1992

5975-14-504-0957
Interconnecting Box

145040957
40402590: RNCC: 3 | RNVC: 2

6 Feb 1998

5975-14-311-2954
Conduit Outlet

143112954
400810: RNCC: 3 | RNVC: 2
800-74B16-2: RNCC: 5 | RNVC: 9

1 Jan 1974

5975-27-016-4988
Metallic Raceway

270164988
GKT-20: RNCC: 2 | RNVC: 1
200X40X1.5MM GALVANIZLI: RNCC: 2 | RNVC: 1

29 Jan 2003

5975-14-391-7866
Metallic Raceway

143917866
V2PT3242-119912: RNCC: 3 | RNVC: 2
V2PT3242-119912: RNCC: 5 | RNVC: 2

21 Mar 1984

5975-14-458-0644
Stuffing Tube

144580644
08040413: RNCC: 3 | RNVC: 2
8040413: RNCC: 5 | RNVC: 2

6 Oct 1992

5975-14-456-4232
Cable Collar

144564232
40-452-759: RNCC: 3 | RNVC: 2

2 Jul 1992

5975-14-537-5659
Cable Marker Sleeve

145375659
735220-6: RNCC: 3 | RNVC: 2

5 Nov 2003

5975-14-445-6316
Cable Marker Sleeve

144456316
H090-6GI8: RNCC: 3 | RNVC: 2
5045024: RNCC: 5 | RNVC: 9

20 Feb 1991

5975-14-296-6501
Stuffing Tube

142966501
520200: RNCC: 3 | RNVC: 2
80X2584A024: RNCC: 5 | RNVC: 2
BB2: RNCC: 5 | RNVC: 2
52020: RNCC: 5 | RNVC: 2

1 Jan 1973

5975-14-238-2799
Cable Marker Sleeve

142382799
352002REPN: RNCC: 3 | RNVC: 2
99042440: RNCC: 5 | RNVC: 2
HELAVIATWIN1REPN: RNCC: 5 | RNVC: 2
99042440: RNCC: 5 | RNVC: 9
99042440: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-449-5765
Cable Marker Sleeve

144495765
03640002004R: RNCC: 3 | RNVC: 2
3597470050385: RNCC: 5 | RNVC: 2
364002REPR: RNCC: 5 | RNVC: 2

27 Aug 1991

5975-14-532-1710
Blank Panel

145321710
DA2C2011711760: RNCC: 3 | RNVC: 2

16 Oct 2002

5975-15-156-8899
Electrical Rosette

151568899
BFG30-D1: RNCC: 3 | RNVC: 2

10 Mar 2003

5975-14-477-1033
Nonmetallic Raceway

144771033
19162: RNCC: 3 | RNVC: 2

26 Jul 1995

5975-14-517-9730
Conduit Outlet

145179730
E0137: RNCC: 3 | RNVC: 2

19 Jan 2000

5975-27-044-9052
Metallic Raceway

270449052
12E01-36010-AA: RNCC: 2 | RNVC: 1

19 Mar 2009

5975-33-201-0511
Cable Marker Sleeve

332010511
5970000450: RNCC: 3 | RNVC: 2
5970000450: RNCC: 5 | RNVC: 2

24 Apr 2002

5975-14-553-4687
Cable Marker Sleeve

145534687
0084101220: RNCC: 3 | RNVC: 2

5 Apr 2007

5975-14-501-6388
Interconnecting Box

145016388
45282210: RNCC: 3 | RNVC: 2
45282210: RNCC: 3 | RNVC: 9

5 Nov 1997

5975-14-445-4939
Cable Marker Sleeve

144454939
ST400S57P91-11-306: RNCC: 3 | RNVC: 2

14 Feb 1991

5975-14-320-7055
Junction Box

143207055
121E63-461-10-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-326-6542
Stuffing Tube

143266542
614804: RNCC: 3 | RNVC: 2
61480: RNCC: 5 | RNVC: 2
N0RMADIXL48: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-042-5171
Stuffing Tube

140425171
16688523: RNCC: 3 | RNVC: 2

27 Feb 1978

5975-14-425-9024
Cable Marker Sleeve

144259024
BAZ10993: RNCC: 3 | RNVC: 2

28 Jul 1988

5975-14-356-9238
Cable Marker Sleeve

143569238
03600105015E: RNCC: 3 | RNVC: 2
V27REPE: RNCC: 5 | RNVC: 2
360105REPE: RNCC: 5 | RNVC: 2
3597470036853: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-383-0547
Cable Marker Sleeve

143830547
16899232: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-520-2846
Interconnecting Box

145202846
622302001: RNCC: 3 | RNVC: 2

17 May 2000

5975-15-155-9431
Ground Rod

151559431
(241)A580949109560: RNCC: 3 | RNVC: 2
4 91095 60: RNCC: 3 | RNVC: 2

11 Oct 2002

5975-15-157-3797
Cable Marker Sleeve

151573797
47915A126230: RNCC: 1 | RNVC: 3

4 Jul 2003

5975-14-404-8456
Cable Marker Sleeve

144048456
29747558: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-505-5603
Junction Box

145055603
05470: RNCC: 3 | RNVC: 2

25 Mar 1998

5975-14-541-8359
Cable Marker Sleeve

145418359
88179-1339: RNCC: 3 | RNVC: 2

26 Jun 2004

5975-14-317-0517
Rigid Metal Conduit

143170517
160-79221-05A: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-15-102-2701
Junction Box Cover

151022701
1455-31-238: RNCC: 3 | RNVC: 2
01-261-31-238: RNCC: 5 | RNVC: 2

27 Oct 1987

5975-15-009-6087
Blank Panel

150096087
330-0201/14: RNCC: 3 | RNVC: 2

5 Dec 1980

5975-14-541-5065
Guide Rail

145415065
1091090-001: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-402-6130
Cable Marker Sleeve

144026130
TMSNR501KBLANC: RNCC: 3 | RNVC: 9
12451244-4: RNCC: 5 | RNVC: 2

19 Jul 1985

5975-14-474-3054
Junction Box

144743054
1513: RNCC: 3 | RNVC: 2
BCP-B: RNCC: 5 | RNVC: 2
716430000154: RNCC: 5 | RNVC: 2
716430000154: RNCC: 5 | RNVC: 9

8 Feb 1995

5975-14-497-4159
Ground Rod

144974159
1032800A: RNCC: 3 | RNVC: 2
1032800A: RNCC: 5 | RNVC: 9
F300 0T 023 1455: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-404-8449
Cable Marker Sleeve

144048449
29747551: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-538-0396
Ground Rod

145380396
212343: RNCC: 3 | RNVC: 2

9 Dec 2003

5975-27-019-4283
Cable Marker Sleeve

270194283
10091MN0035: RNCC: 2 | RNVC: 1

15 Nov 2003

5975-14-396-7527
Cable Marker Sleeve

143967527
20668372: RNCC: 3 | RNVC: 2

27 Nov 1984

5975-14-482-2941
Cable Marker Sleeve

144822941
HOI85-5RON: RNCC: 3 | RNVC: 2
HOI85N: RNCC: 5 | RNVC: 2
0617174: RNCC: 5 | RNVC: 2

4 Jul 1996

5975-14-041-5160
Chassis Base

140415160
107099: RNCC: 3 | RNVC: 2
107099: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-364-6579
Cable Marker Sleeve

143646579
7-250: RNCC: 3 | RNVC: 2
ST400S58P206-250: RNCC: 5 | RNVC: 2
T0US58P206-250: RNCC: 5 | RNVC: 2

2 Sep 1980

5975-14-508-1470
Interconnecting Box

145081470
5-666-140: RNCC: 3 | RNVC: 2

26 Aug 1998

5975-14-416-7428
Cable Marker Sleeve

144167428
HT20-25BA12-016: RNCC: 3 | RNVC: 2
2-016: RNCC: 5 | RNVC: 2

25 Jun 1987

5975-14-287-0724
Cable Marker Sleeve

142870724
MGCM3BA10-24: RNCC: 3 | RNVC: 2
9554819240: RNCC: 5 | RNVC: 2
MGCM3BA10-24: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-496-8846
Interconnecting Box

144968846
NO PRIMARY REF14-496-8846: RNCC: 3 | RNVC: 2
25302-89010: RNCC: 5 | RNVC: 9
F300 0T 022 2338: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-368-5628
Cable Marker Sleeve

143685628
036200050014: RNCC: 3 | RNVC: 2
T286-457: RNCC: 5 | RNVC: 2
3597470045602: RNCC: 5 | RNVC: 2
362005-04REP4: RNCC: 5 | RNVC: 2
362005REP4: RNCC: 5 | RNVC: 2
M37JAUNEREP4: RNCC: 5 | RNVC: 2
H050-6J04: RNCC: 5 | RNVC: 9

20 Feb 1981

5975-14-438-4877
Cable Hanger

144384877
332A61-4123-01: RNCC: 3 | RNVC: 2

21 Mar 1990

5975-14-345-9701
Junction Box

143459701
6D165: RNCC: 3 | RNVC: 2

5 Nov 1977

5975-14-553-4699
Cable Marker Sleeve

145534699
0084102790: RNCC: 3 | RNVC: 2

5 Apr 2007

5975-14-397-1537
Junction Box

143971537
366A61-3140-0001: RNCC: 3 | RNVC: 2

1 Dec 1984

5975-14-515-6688
Stuffing Tube

145156688
915-3-51-190: RNCC: 3 | RNVC: 2

21 Jul 1999

5975-14-438-4855
Cable Hanger

144384855
332A61-2621-21: RNCC: 3 | RNVC: 2

21 Mar 1990

5975-14-477-9067
Interconnecting Box

144779067
304TS05Y1001: RNCC: 3 | RNVC: 2

2 Oct 1995

5975-14-487-0730
Junction Box

144870730
48320011: RNCC: 3 | RNVC: 2
7511-183-20011: RNCC: 5 | RNVC: 9

2 Apr 1997

5975-14-524-1327
Cable Marker Sleeve

145241327
F1261605: RNCC: 3 | RNVC: 2

5 Mar 2001

5975-14-517-9739
Stuffing Tube

145179739
KI026875: RNCC: 3 | RNVC: 2

19 Jan 2000

5975-14-254-1090
Cable Marker Sleeve

142541090
03520005004+: RNCC: 3 | RNVC: 2
352005SYMB+: RNCC: 5 | RNVC: 2
HELAVIATWIN4REPSIGNEP: RNCC: 5 | RNVC: 2
352005SYMBP: RNCC: 5 | RNVC: 2

1 Jan 1969

5975-14-512-8689
Interconnecting Box

145128689
476831: RNCC: 3 | RNVC: 2

24 Feb 1999

5975-33-202-7044
Interconnecting Box

332027044
9673.590.5100: RNCC: 3 | RNVC: 2
2510900946: RNCC: 5 | RNVC: 2
2510900946: RNCC: 5 | RNVC: 2

29 Sep 2003

5975-14-350-1409
Stuffing Tube

143501409
5975CABVPE4: RNCC: 2 | RNVC: 2
504402: RNCC: 3 | RNVC: 2
5975CA-BVPE4: RNCC: 5 | RNVC: 2
K0210005: RNCC: 5 | RNVC: 2
50442: RNCC: 5 | RNVC: 2
BVPE4: RNCC: 5 | RNVC: 2

14 Jun 1978

5975-14-391-7867
Metallic Raceway

143917867
V2PT3242-119924: RNCC: 3 | RNVC: 2
V2PT3242-119924: RNCC: 5 | RNVC: 2

21 Mar 1984

5975-14-505-5052
Interconnecting Box

145055052
8098-955-130: RNCC: 3 | RNVC: 2

18 Mar 1998

5975-14-317-0529
Rigid Metal Conduit

143170529
160-79221-08A: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-372-2537
Push Button

143722537
TH20K2503: RNCC: 3 | RNVC: 2

1 Sep 1981

5975-14-356-9365
Cable Marker Sleeve

143569365
03600108015X: RNCC: 3 | RNVC: 2
3597470038451: RNCC: 5 | RNVC: 2
360108REPX: RNCC: 5 | RNVC: 2
V50REPX: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-543-9645
Interconnecting Box

145439645
91791: RNCC: 3 | RNVC: 2
8900000840: RNCC: 3 | RNVC: 9

19 Dec 2004

5975-14-518-5015
Interconnecting Box

145185015
EAEXX000014: RNCC: 3 | RNVC: 9

9 Feb 2000

5975-14-551-3935
Interconnecting Box

145513935
S880A50A1037: RNCC: 1 | RNVC: 2
SE11959: RNCC: 3 | RNVC: 2

15 Sep 2006

5975-14-440-4987
Cable Marker Sleeve

144404987
20130388: RNCC: 3 | RNVC: 2
20130388: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-420-7457
Cable Marker Sleeve

144207457
ST400S58P201-013: RNCC: 3 | RNVC: 2
1-013: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-460-6497
Junction Box

144606497
5650142Z00: RNCC: 3 | RNVC: 2
141-10N5650142Z00: RNCC: 5 | RNVC: 9
5650142Z00: RNCC: 5 | RNVC: 9

4 Feb 1993

5975-14-469-7895
Interconnecting Box

144697895
45-0431: RNCC: 3 | RNVC: 2

10 May 1994

5975-14-363-3807
Stuffing Tube

143633807
NO PRIMARY REF14-363-3807: RNCC: 3 | RNVC: 2
550180000: RNCC: 5 | RNVC: 9
55-018-0000: RNCC: 5 | RNVC: 9

3 Apr 1980

5975-27-008-5186
Pothead

270085186
20580495-8: RNCC: 2 | RNVC: 1
4008881: RNCC: 2 | RNVC: 1
KABLO BASI: RNCC: 2 | RNVC: 1
83.25470.0002: RNCC: 2 | RNVC: 1

25 Oct 2000

5975-14-489-6239
Cable Hanger

144896239
332A61-3144-20: RNCC: 3 | RNVC: 2

6 Aug 1997

5975-14-488-5908
Cable Collar

144885908
136-01N62155-5/7: RNCC: 3 | RNVC: 2

21 May 1997

5975-14-312-1572
Cable Marker Sleeve

143121572
9743-114: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-345-2238
Junction Box Cover

143452238
FF1E601-45820: RNCC: 3 | RNVC: 2

5 Oct 1977

5975-14-270-9088
Cable Marker Sleeve

142709088
204335-1383A: RNCC: 3 | RNVC: 2
7815CXZ5S30KD1383AJ: RNCC: 5 | RNVC: 9

1 Jan 1970

5975-33-200-4108
Cable Marker Sleeve

332004108
Q 314 196 504: RNCC: 3 | RNVC: 2

22 Jan 2002

5975-14-505-0686
Cable Marker Sleeve

145050686
KIFV32X25X3-4: RNCC: 3 | RNVC: 2

11 Mar 1998

5975-14-366-8055
Interior Cable Rack

143668055
969882: RNCC: 3 | RNVC: 2
969882: RNCC: 5 | RNVC: 9

20 Nov 1980

5975-27-025-9051
Raceway Elbow

270259051
1000 50: RNCC: 2 | RNVC: 2
1000 50: RNCC: 5 | RNVC: 9
T DIRSEK 100X50MM: RNCC: 5 | RNVC: 9

29 Apr 2005

5975-14-520-7785
Raceway Cover

145207785
192E328-00: RNCC: 3 | RNVC: 2
192E328-00: RNCC: 5 | RNVC: 2

14 Jun 2000

5975-14-479-9304
Cable Marker Sleeve

144799304
TMS-1/2NR11U9: RNCC: 3 | RNVC: 9
TMS1-2NR11U9: RNCC: 5 | RNVC: 9

14 Feb 1996

5975-14-541-5254
Interconnecting Box

145415254
1091563-001: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-539-6513
Interconnecting Box

145396513
21231527-00: RNCC: 3 | RNVC: 2
21231527-6: RNCC: 5 | RNVC: 2

28 Jan 2004

5975-14-310-4924
Indicator Panel

143104924
A10-63-227-51-0: RNCC: 3 | RNVC: 2
A10-63-227-51-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-418-3938
Ground Rod

144183938
NO PRIMARY REF14-418-3938: RNCC: 3 | RNVC: 2
1510: RNCC: 5 | RNVC: 9
01510: RNCC: 5 | RNVC: 9

19 Aug 1987

5975-14-541-8286
Cable Marker Sleeve

145418286
88179-1192: RNCC: 3 | RNVC: 2

26 Jun 2004

5975-14-242-4519
Guy

142424519
301965: RNCC: 3 | RNVC: 2
HB-23A: RNCC: 6 | RNVC: 9

1 Jan 1967

5975-14-256-8967
Stuffing Tube

142568967
7005D1: RNCC: 3 | RNVC: 2
7005D1: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-473-3984
Nonmetallic Raceway

144733984
332A61-3356-02: RNCC: 3 | RNVC: 2

13 Dec 1994

5975-14-355-9282
Push Button

143559282
63-600-005EP: RNCC: 3 | RNVC: 2
574003080: RNCC: 5 | RNVC: 2

5 Apr 1979

5975-14-287-0725
Cable Marker Sleeve

142870725
MGCM3BA10-25: RNCC: 3 | RNVC: 2
9554819250: RNCC: 5 | RNVC: 2
MGCM3BA10-25: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-507-4815
Interior Cable Rack

145074815
GOULO94019X00: RNCC: 3 | RNVC: 2

16 Jul 1998

5975-14-469-9654
Cable Marker Sleeve

144699654
213875-01: RNCC: 3 | RNVC: 2

18 May 1994

5975-14-402-8801
Cable Collar

144028801
NO PRIMARY REF14-402-8801: RNCC: 3 | RNVC: 2
AU2293: RNCC: 5 | RNVC: 9

19 Jul 1985

5975-14-479-1542
Cable Marker Sleeve

144791542
03520015004C: RNCC: 3 | RNVC: 2
3597470261361: RNCC: 5 | RNVC: 2
352015REPC: RNCC: 5 | RNVC: 2
352-015-C: RNCC: 5 | RNVC: 2
HELAVIATWIN4SYMBC: RNCC: 5 | RNVC: 2

18 Dec 1995

5975-14-552-8235
Metallic Raceway

145528235
717649: RNCC: 3 | RNVC: 2

5 Feb 2007

5975-14-238-2849
Cable Marker Sleeve

142382849
03520006004O: RNCC: 3 | RNVC: 2
99024044: RNCC: 5 | RNVC: 2
HELAVIATWIN5REP0: RNCC: 5 | RNVC: 2
352006REPO: RNCC: 5 | RNVC: 2
99024044: RNCC: 5 | RNVC: 9
99024044: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-15-178-9304
Stuffing Tube Plug

151789304
1E42ARN51416: RNCC: 3 | RNVC: 2

10 Feb 2006

5975-15-060-9472
Cable Marker Sleeve

150609472
F403B1-1-01: RNCC: 3 | RNVC: 2
F403B1-1-01: RNCC: 5 | RNVC: 2

20 May 1977

5975-14-340-1496
Stuffing Tube

143401496
PM265: RNCC: 3 | RNVC: 2

18 Jan 1977

5975-14-421-2347
Raceway Cover

144212347
CV300: RNCC: 3 | RNVC: 2
547054: RNCC: 3 | RNVC: 2
102126: RNCC: 3 | RNVC: 9

11 Jan 1988

5975-14-482-2948
Cable Marker Sleeve

144822948
HOI85-5ROC: RNCC: 3 | RNVC: 2
0617186: RNCC: 5 | RNVC: 2
HOI85C: RNCC: 5 | RNVC: 2

4 Jul 1996

5975-33-107-0120
Rigid Metal Conduit

331070120
PCAMI/RP/0700001613: RNCC: 3 | RNVC: 2

25 May 1999

5975-14-529-6989
Interior Cable Rack

145296989
240110N-N24FM5/A: RNCC: 3 | RNVC: 2
240110N-N24FM5/A: RNCC: 5 | RNVC: 9

4 Apr 2002

5975-33-203-1417
Stuffing Tube

332031417
5975000075: RNCC: 3 | RNVC: 2
10-40581-20/22 PG16: RNCC: 5 | RNVC: 2

5 Feb 2004

5975-14-345-0169
Cable Marker Sleeve

143450169
P12-3-2RG2: RNCC: 3 | RNVC: 2
484325-2: RNCC: 5 | RNVC: 2
P12-2: RNCC: 5 | RNVC: 2
P12-3-17RG2: RNCC: 5 | RNVC: 2
P12RG2: RNCC: 5 | RNVC: 2

5 Oct 1977

5975-14-465-2848
Interconnecting Box

144652848
365A64-3007-00: RNCC: 3 | RNVC: 2

22 Sep 1993

5975-14-270-9105
Cable Marker Sleeve

142709105
204336-1418A: RNCC: 3 | RNVC: 2
7815CXZ7S30KD1418AJ: RNCC: 5 | RNVC: 9

1 Jan 1970

5975-14-429-8915
Cable Marker Sleeve

144298915
SLP40-25-BAR030: RNCC: 3 | RNVC: 2
4-030: RNCC: 3 | RNVC: 2
4SLEEVE030: RNCC: 5 | RNVC: 2

15 Feb 1989

5975-14-485-4549
Interconnecting Box

144854549
434325: RNCC: 3 | RNVC: 2
KE*610: RNCC: 5 | RNVC: 9
434325-001: RNCC: 5 | RNVC: 9

23 Jan 1997

5975-14-400-7254
Fanning Strip

144007254
8675-42031: RNCC: 3 | RNVC: 2
8675-42031: RNCC: 5 | RNVC: 2
867542031: RNCC: 5 | RNVC: 2

14 May 1985

5975-14-481-9629
Fanning Strip

144819629
NO PRIMARY REF14-481-9629: RNCC: 3 | RNVC: 2
07803: RNCC: 5 | RNVC: 9

13 Jun 1996

5975-14-421-2285
Stuffing Tube Plug

144212285
2072351: RNCC: 3 | RNVC: 2

11 Jan 1988

5975-14-371-3874
Cable Marker Sleeve

143713874
100SP120-0141: RNCC: 3 | RNVC: 2

5 Aug 1981

5975-14-408-8800
Guide Rail

144088800
HL105P2-109-4: RNCC: 2 | RNVC: 2
00175110900: RNCC: 3 | RNVC: 2
C93-462: RNCC: 4 | RNVC: 1
MBBN3495W09: RNCC: 5 | RNVC: 2
001751-109-00: RNCC: 5 | RNVC: 2
75502-09: RNCC: 5 | RNVC: 2

2 Apr 1986

5975-14-402-7666
Junction Box

144027666
9760-43: RNCC: 3 | RNVC: 9

19 Jul 1985

5975-14-373-7909
Stuffing Tube

143737909
FPCM10P: RNCC: 3 | RNVC: 2
TPE10-011: RNCC: 5 | RNVC: 2

13 Nov 1981

5975-14-415-6872
Interconnecting Box

144156872
CRP401-610: RNCC: 3 | RNVC: 2
CRP401-610-100: RNCC: 5 | RNVC: 2

18 May 1987

5975-14-310-6366
Cable Marker Sleeve

143106366
H50-35J0K226: RNCC: 3 | RNVC: 2
N50-35JAUNEK226: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-508-1450
Cable Marker Sleeve

145081450
5-601-149: RNCC: 3 | RNVC: 2

26 Aug 1998

5975-14-238-2658
Cable Marker Sleeve

142382658
352002REP8: RNCC: 3 | RNVC: 2
99022959: RNCC: 3 | RNVC: 2
99022959: RNCC: 5 | RNVC: 2
352-02REP8: RNCC: 5 | RNVC: 2
HELAVIATWIN1REP8: RNCC: 5 | RNVC: 2
99022959: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-15-153-3953
Blank Panel

151533953
5137-364-08: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-14-542-5291
Cable Marker Sleeve

145425291
2594-232: RNCC: 3 | RNVC: 2

21 Jul 2004

5975-14-309-9927
Cable Marker Sleeve

143099927
80078-12: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-508-8332
Interconnecting Box

145088332
A31-42748: RNCC: 3 | RNVC: 2

30 Sep 1998

5975-14-514-8989
Cable Marker Sleeve

145148989
10282412: RNCC: 3 | RNVC: 2

23 Jun 1999

5975-14-371-6391
Junction Box

143716391
6330006: RNCC: 3 | RNVC: 2
6330006: RNCC: 5 | RNVC: 2

5 Aug 1981

5975-33-108-1916
Stuffing Tube

331081916
312501: RNCC: 3 | RNVC: 2
312501: RNCC: 5 | RNVC: 2

29 Jan 2001

5975-14-439-5277
Metallic Raceway

144395277
1369405: RNCC: 3 | RNVC: 2
KACH405: RNCC: 5 | RNVC: 2

11 May 1990

5975-27-009-4392
Cable Marker Sleeve

270094392
KG2-05001DK0184: RNCC: 2 | RNVC: 1
NO:2: RNCC: 5 | RNVC: 9
NO:2: RNCC: 5 | RNVC: 9

5 Jul 2001

5975-14-404-8406
Cable Marker Sleeve

144048406
29747508: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-238-2243
Cable Marker Sleeve

142382243
035200020040: RNCC: 3 | RNVC: 2
99022951: RNCC: 5 | RNVC: 2
352002REP0: RNCC: 5 | RNVC: 2
3597470257319: RNCC: 5 | RNVC: 2
HELAVIATWIN1REP0: RNCC: 5 | RNVC: 2
99022951: RNCC: 5 | RNVC: 9
99022951: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-27-055-4610
Stuffing Tube

270554610
TPRNOZ M16X1,5: RNCC: 2 | RNVC: 1
TPRNOZ M16X1,5: RNCC: 5 | RNVC: 9

6 Dec 2011

5975-14-497-8742
Metallic Raceway

144978742
25666574: RNCC: 3 | RNVC: 2
2-566657-4: RNCC: 5 | RNVC: 2
F300 0T 022 7587: RNCC: 6 | RNVC: 9

22 Oct 1997

5975-14-307-3219
Metallic Raceway

143073219
NO PRIMARY REF14-307-3219: RNCC: 3 | RNVC: 2
6000-168: RNCC: 5 | RNVC: 9

1 Jan 1974

5975-14-330-6679
Cable Marker Sleeve

143306679
120874A: RNCC: 3 | RNVC: 2
120874: RNCC: 5 | RNVC: 9
85-688-3867: RNCC: 6 | RNVC: 9

2 Jul 1975

5975-14-368-5609
Cable Marker Sleeve

143685609
036200030012: RNCC: 3 | RNVC: 2
T286-435: RNCC: 5 | RNVC: 2
3597470044469: RNCC: 5 | RNVC: 2
362003-07REP2: RNCC: 5 | RNVC: 2
362003REP2: RNCC: 5 | RNVC: 2
M22R0UGEREP2: RNCC: 5 | RNVC: 2
H030-6RG2: RNCC: 5 | RNVC: 9

20 Feb 1981

5975-14-342-0062
Interior Cable Rack

143420062
VI90D107SZ100: RNCC: 3 | RNVC: 2
VI90D107SZ100: RNCC: 3 | RNVC: 9
VI90D107SZ100: RNCC: 5 | RNVC: 2
102071: RNCC: 5 | RNVC: 9

14 Apr 1977

5975-14-357-5363
Anchor Strap

143575363
A11A234260023A1: RNCC: 3 | RNVC: 2

7 Jun 1979

5975-14-454-1040
Cable Hanger

144541040
16509109: RNCC: 3 | RNVC: 2

19 Mar 1992

5975-14-485-2714
Ground Rod

144852714
MT650: RNCC: 3 | RNVC: 2
59-64: RNCC: 5 | RNVC: 2

15 Jan 1997

5975-15-196-8138
Nonmetallic Raceway

151968138
PN UAS 00045501: RNCC: 3 | RNVC: 2
6145F76036961: RNCC: 5 | RNVC: 9

2 Apr 2004

5975-14-453-5748
Cable Marker Sleeve

144535748
BAZ9686: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-382-9320
Cable Marker Sleeve

143829320
25687: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-383-0524
Cable Marker Sleeve

143830524
16899238: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-260-8301
Junction Box

142608301
D5750: RNCC: 3 | RNVC: 2
D5750: RNCC: 5 | RNVC: 9

1 Jan 1970

5975-14-553-4704
Cable Marker Sleeve

145534704
0084102760: RNCC: 3 | RNVC: 2

5 Apr 2007

5975-14-382-7081
Cable Marker Sleeve

143827081
0264702080: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-448-2775
Stuffing Tube

144482775
5975BA-CV2L: RNCC: 2 | RNVC: 2
5975BA-CV2L: RNCC: 3 | RNVC: 2
5975BA-CV2L: RNCC: 3 | RNVC: 2
RAR4691: RNCC: 5 | RNVC: 2

18 Jun 1991

5975-14-271-3998
Stuffing Tube

142713998
610900: RNCC: 3 | RNVC: 2

1 Jan 1970

5975-14-485-2357
Interior Cable Rack

144852357
421143: RNCC: 3 | RNVC: 2
421143: RNCC: 5 | RNVC: 2
421143: RNCC: 5 | RNVC: 2

13 Jan 1997

5975-15-153-4086
Blank Panel

151534086
5216-251-19: RNCC: 3 | RNVC: 2

11 Jan 2001

5975-14-317-0609
Cable Marker Sleeve

143170609
NO PRIMARY REF14-317-0609: RNCC: 3 | RNVC: 2
9560110200: RNCC: 5 | RNVC: 2
35323-2: RNCC: 5 | RNVC: 9

1 Jan 1975

5975-33-201-5532
Chassis Base

332015532
223561771-02: RNCC: 3 | RNVC: 2

2 Sep 2002

5975-14-362-6074
Cable Marker Sleeve

143626074
03600102015X: RNCC: 3 | RNVC: 2
3597470035818: RNCC: 5 | RNVC: 2
360102REPX: RNCC: 5 | RNVC: 2
V11REPX: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-475-6716
Cable Hanger

144756716
802290130716: RNCC: 3 | RNVC: 2
802290130716: RNCC: 5 | RNVC: 9
SDM802290130716: RNCC: 5 | RNVC: 9

26 Apr 1995

5975-33-201-4450
Interconnecting Box

332014450
W290684551800: RNCC: 3 | RNVC: 2

22 Jul 2002

5975-14-534-2168
Insulator Bracket

145342168
NNM0011040408328: RNCC: 2 | RNVC: 2

17 Mar 2003

5975-33-001-8600
Interior Cable Rack

330018600
6301: RNCC: 3 | RNVC: 2

8 May 1991

5975-15-203-2077
Cable Marker Sleeve

152032077
999-8001-76-614: RNCC: 3 | RNVC: 2
(241)A0126999-8001-76-614: RNCC: 5 | RNVC: 2

28 Nov 2007

5975-14-523-1346
Interconnecting Box

145231346
4527209A: RNCC: 3 | RNVC: 2

8 Jan 2001

5975-14-456-4361
Cable Marker Sleeve

144564361
H040-4BU6: RNCC: 3 | RNVC: 2

2 Jul 1992

5975-14-466-3069
Stuffing Tube

144663069
1281T-1-06-58: RNCC: 3 | RNVC: 2
1281T-1-06: RNCC: 5 | RNVC: 2
1281T1-06-58: RNCC: 5 | RNVC: 2

3 Nov 1993

5975-14-458-2830
Cable Marker Sleeve

144582830
NSA937201ME0500: RNCC: 1 | RNVC: 2
TMS1/8-9: RNCC: 3 | RNVC: 9
NSA937201ME0500: RNCC: 5 | RNVC: 2

15 Oct 1992

5975-14-416-7228
Cable Marker Sleeve

144167228
HT15-25BA11-047: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-332-2351
Access Cover

143322351
NO PRIMARY REF14-332-2351: RNCC: 3 | RNVC: 2
4527B: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-14-299-1212
Metallic Raceway

142991212
121E63-414-10-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-477-0462
Junction Box

144770462
2036952N00: RNCC: 3 | RNVC: 2

19 Jul 1995

5975-14-474-2958
Metallic Raceway

144742958
39022383: RNCC: 3 | RNVC: 2

8 Feb 1995

5975-14-523-2539
Cable Hanger

145232539
RA1M702446038: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-14-383-0029
Nonmetallic Raceway

143830029
4770202480: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-464-2322
Interconnecting Box

144642322
620-867-944-0: RNCC: 3 | RNVC: 2

28 Jul 1993

5975-15-120-3349
Blank Panel

151203349
92300150240: RNCC: 3 | RNVC: 2
93158888: RNCC: 5 | RNVC: 2

30 Mar 1995

5975-14-235-4627
Cable Marker Sleeve

142354627
NO PRIMARY REF14-235-4627: RNCC: 3 | RNVC: 2
2790-4-8: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-288-3596
Cable Marker Sleeve

142883596
2529-1-207Y: RNCC: 3 | RNVC: 2
2529-1-207Y: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-339-4449
Cable Marker Sleeve

143394449
SLP15-10J0RKNR: RNCC: 3 | RNVC: 2
620-849-036-0: RNCC: 5 | RNVC: 2
620-849-036-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-479-1553
Cable Marker Sleeve

144791553
03520015004M: RNCC: 3 | RNVC: 2
352015REPM: RNCC: 5 | RNVC: 2
352-015-M: RNCC: 5 | RNVC: 2
3597470261460: RNCC: 5 | RNVC: 2
HELAVIATWIN4SYMBM: RNCC: 5 | RNVC: 2

18 Dec 1995

5975-43-000-1018
Interconnecting Box

430001018
1-5826-0135-1: RNCC: 3 | RNVC: 2

31 Mar 2005

5975-14-505-5656
Stuffing Tube

145055656
1002: RNCC: 3 | RNVC: 2
BV1BIS-LAITON: RNCC: 5 | RNVC: 2

25 Mar 1998

5975-14-516-2876
Cable Marker Sleeve

145162876
NSA937201MG0400: RNCC: 3 | RNVC: 2

15 Sep 1999

5975-33-125-5067
Metallic Raceway

331255067
91-41170-00: RNCC: 3 | RNVC: 2

13 Jun 1990

5975-14-384-3620
Push Button

143843620
BMC1-1-017N: RNCC: 3 | RNVC: 9

4 May 1983

5975-14-430-6166
Anchor Strap

144306166
PM1A514100013: RNCC: 3 | RNVC: 2
PM1A514100013: RNCC: 5 | RNVC: 2

22 Mar 1989

5975-14-356-9330
Cable Marker Sleeve

143569330
03600107015Y: RNCC: 3 | RNVC: 2
3597470038024: RNCC: 5 | RNVC: 2
360107REPY: RNCC: 5 | RNVC: 2
V40REPY: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-356-9366
Cable Marker Sleeve

143569366
03600108015Y: RNCC: 3 | RNVC: 2
3597470038468: RNCC: 5 | RNVC: 2
360108REPY: RNCC: 5 | RNVC: 2
V50REPY: RNCC: 5 | RNVC: 2

15 May 1979

5975-15-157-3796
Cable Marker Sleeve

151573796
47915A126220: RNCC: 1 | RNVC: 3

4 Jul 2003

5975-14-305-3436
Push Button

143053436
1106504-3GBG: RNCC: 3 | RNVC: 2
B0UT0N10N0IRGRAVE3: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-497-3446
Chassis Base

144973446
4769810030: RNCC: 3 | RNVC: 2
F300 0T 023 0356: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-508-0275
Metallic Raceway

145080275
0551244: RNCC: 3 | RNVC: 2

26 Aug 1998

5975-14-354-0962
Fanning Strip

143540962
02440400020: RNCC: 3 | RNVC: 2
24404: RNCC: 5 | RNVC: 2

16 Jan 1979

5975-33-200-4096
Cable Marker Sleeve

332004096
Q 314 196 227: RNCC: 3 | RNVC: 2

22 Jan 2002

5975-14-405-2240
Stuffing Tube

144052240
632152: RNCC: 3 | RNVC: 2
1011-60: RNCC: 5 | RNVC: 2

27 Nov 1985

5975-14-317-0613
Cable Marker Sleeve

143170613
NO PRIMARY REF14-317-0613: RNCC: 3 | RNVC: 2
9560110240: RNCC: 5 | RNVC: 2
35316-2: RNCC: 5 | RNVC: 9

1 Jan 1975

5975-14-431-6160
Cable Marker Sleeve

144316160
P30-4-8MA1: RNCC: 3 | RNVC: 2
P30MA1: RNCC: 5 | RNVC: 2

26 Apr 1989

5975-27-041-4294
Nonmetallic Raceway

270414294
101 34: RNCC: 5 | RNVC: 9

22 May 2008

5975-14-356-9254
Cable Marker Sleeve

143569254
03600105015U: RNCC: 3 | RNVC: 2
3597470037102: RNCC: 5 | RNVC: 2
360105REPU: RNCC: 5 | RNVC: 2
V27REPU: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-476-1410
Cable Marker Sleeve

144761410
HOI50-RO-V: RNCC: 3 | RNVC: 2
HOI50-V: RNCC: 5 | RNVC: 2
HOI50-V-ROSE: RNCC: 5 | RNVC: 2

24 May 1995

5975-14-480-6292
Blank Panel

144806292
2022120: RNCC: 3 | RNVC: 2

21 Mar 1996

5975-15-163-1013
Blank Panel

151631013
298.702.007: RNCC: 3 | RNVC: 2

1 Jul 2002

5975-14-542-9962
Cable Hanger

145429962
DNG50025G: RNCC: 3 | RNVC: 2

18 Aug 2004

5975-33-200-4102
Cable Marker Sleeve

332004102
Q 314 196 323: RNCC: 3 | RNVC: 2

22 Jan 2002

5975-27-048-7754
Guide Rail

270487754
MP002521: RNCC: 2 | RNVC: 1

26 Feb 2010

5975-14-401-3053
Junction Box

144013053
BA17004: RNCC: 3 | RNVC: 2
229881: RNCC: 5 | RNVC: 2

5 Jun 1985

5975-14-453-5749
Cable Marker Sleeve

144535749
BAZ9687: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-527-0875
Guide Rail

145270875
8796 040 103: RNCC: 3 | RNVC: 2

1 Oct 2001

5975-14-438-9230
Junction Box

144389230
332A67-1642-61: RNCC: 3 | RNVC: 2

11 Apr 1990

5975-14-549-3066
Metallic Raceway

145493066
5010631398: RNCC: 3 | RNVC: 2

21 Mar 2006

5975-14-509-2045
Metallic Raceway

145092045
46238557: RNCC: 3 | RNVC: 2
46238557: RNCC: 3 | RNVC: 9

21 Oct 1998

5975-14-471-8508
Junction Box

144718508
379472: RNCC: 3 | RNVC: 2
379472: RNCC: 5 | RNVC: 9

21 Sep 1994

5975-14-317-3562
Stuffing Tube

143173562
501300: RNCC: 3 | RNVC: 2
50130: RNCC: 5 | RNVC: 2
FB3: RNCC: 5 | RNVC: 2

1 Jan 1975

5975-14-416-7222
Cable Marker Sleeve

144167222
HT15-25BA11-041: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-33-202-0718
Ground Rod

332020718
L3061.30.01: RNCC: 3 | RNVC: 2

3 Jan 2003

5975-14-520-4154
Metallic Raceway

145204154
TP150.80: RNCC: 3 | RNVC: 2

17 May 2000

5975-14-525-2758
Interconnecting Box

145252758
10609890: RNCC: 3 | RNVC: 2

23 May 2001

5975-14-349-1952
Junction Box

143491952
92201: RNCC: 3 | RNVC: 2

22 May 1978

5975-14-322-8879
Cable Marker Sleeve

143228879
0084052290: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-344-5964
Junction Box

143445964
BA2604: RNCC: 3 | RNVC: 2
185095: RNCC: 5 | RNVC: 2

9 Sep 1977

5975-14-364-7062
Interior Cable Rack

143647062
557080: RNCC: 3 | RNVC: 2

2 Sep 1980

5975-33-002-0780
Metallic Raceway

330020780
1489: RNCC: 3 | RNVC: 2

15 Aug 1992

5975-15-163-1011
Blank Panel

151631011
299.701.515: RNCC: 3 | RNVC: 2

1 Jul 2002

5975-27-055-3203
Ground Rod

270553203
100 CM TOPRAKLAMA CUBUGU: RNCC: 2 | RNVC: 1

29 Nov 2011

5975-27-034-5166
Ground Rod

270345166
SIBTOPCU: RNCC: 2 | RNVC: 1
O 20 1.5 MT CUBUK: RNCC: 5 | RNVC: 9

15 Jan 2007

5975-14-465-8383
Junction Box

144658383
46041152: RNCC: 3 | RNVC: 2

14 Oct 1993

5975-14-377-1538
Cable Marker Sleeve

143771538
100SP120-0142: RNCC: 3 | RNVC: 2

17 May 1982

5975-14-383-3002
Cable Marker Sleeve

143833002
24399: RNCC: 3 | RNVC: 2

11 Apr 1983

5975-14-339-1875
Cable Marker Sleeve

143391875
352004REPZER0: RNCC: 3 | RNVC: 2
99008777: RNCC: 5 | RNVC: 2
352-04REPZER0: RNCC: 5 | RNVC: 2
99008777: RNCC: 5 | RNVC: 9
99008777: RNCC: 5 | RNVC: 9

17 Dec 1976

5975-14-470-7398
Junction Box

144707398
815-2-71-800: RNCC: 3 | RNVC: 2

5 Jul 1994

5975-15-181-2651
Blank Panel

151812651
AAK-1056/04: RNCC: 3 | RNVC: 2
(241)A0069AAK-1056/04: RNCC: 5 | RNVC: 2

20 Nov 2008

5975-14-423-7692
Cable Marker Sleeve

144237692
259703: RNCC: 3 | RNVC: 2

28 Apr 1988

5975-33-202-8948
Stuffing Tube

332028948
204200307: RNCC: 3 | RNVC: 2
204200307: RNCC: 5 | RNVC: 2

26 Nov 2003

5975-14-449-0241
Junction Box

144490241
20324714: RNCC: 3 | RNVC: 2
20324714: RNCC: 5 | RNVC: 9

24 Jul 1991

5975-14-356-9392
Cable Marker Sleeve

143569392
03600109015O: RNCC: 3 | RNVC: 2
3597470038758: RNCC: 5 | RNVC: 2
360109LETTREO: RNCC: 5 | RNVC: 2
V60REP0: RNCC: 5 | RNVC: 2
360109LETTRE0: RNCC: 5 | RNVC: 2

15 May 1979

5975-15-154-0736
Cable Collar

151540736
0-102075: RNCC: 3 | RNVC: 2
(241)A39630-102075: RNCC: 5 | RNVC: 2
1PA39630-102075: RNCC: 5 | RNVC: 2

19 Mar 2001

5975-14-407-5946
Junction Box Cover

144075946
620-847-965-0: RNCC: 3 | RNVC: 2

27 Feb 1986

5975-15-156-8905
Electrical Rosette

151568905
BFG20-D1: RNCC: 3 | RNVC: 2

10 Mar 2003

5975-14-511-0845
Raceway Cover

145110845
152242: RNCC: 3 | RNVC: 2

2 Dec 1998

5975-27-058-1345
Guide Rail

270581345
RK-1: RNCC: 3 | RNVC: 1

13 Dec 2012

5975-14-256-6459
Guy

142566459
MARJ146: RNCC: 3 | RNVC: 2
912-2: RNCC: 5 | RNVC: 2

1 Jan 1969

5975-33-206-0598
Cable Marker Sleeve

332060598
MMN461-1-7: RNCC: 3 | RNVC: 2
2815-33-M30-3425: RNCC: 6 | RNVC: 9

17 Jul 2007

5975-14-475-4989
Cable Marker Sleeve

144754989
03690001004N: RNCC: 3 | RNVC: 2
3597470053454: RNCC: 5 | RNVC: 2
369001REPN: RNCC: 5 | RNVC: 2
M-65-M2REPN: RNCC: 5 | RNVC: 2
782114005643: RNCC: 5 | RNVC: 2
782114005643: RNCC: 5 | RNVC: 9

12 Apr 1995

5975-14-489-4200
Junction Box

144894200
3-93-53-025-04-C: RNCC: 3 | RNVC: 2

16 Jul 1997

5975-14-321-1061
Junction Box

143211061
03550: RNCC: 3 | RNVC: 2
355: RNCC: 5 | RNVC: 2
251-5728: RNCC: 5 | RNVC: 2

1 Jan 1975

5975-14-517-7352
Cable Marker Sleeve

145177352
320-316-701-0: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-14-440-5012
Cable Marker Sleeve

144405012
20130524: RNCC: 3 | RNVC: 2
20130524: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-356-9177
Cable Marker Sleeve

143569177
03600103015P: RNCC: 3 | RNVC: 2
3597470036136: RNCC: 5 | RNVC: 2
360103REPP: RNCC: 5 | RNVC: 2
V16REPP: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-483-3001
Interconnecting Box

144833001
WNSNGCC0004E0-A-REP10: RNCC: 3 | RNVC: 2
WNSNGCC0004E0-INDICE.A-REP10: RNCC: 5 | RNVC: 2

31 Aug 1996

5975-14-485-0805
Interconnecting Box

144850805
3511-181-28063: RNCC: 3 | RNVC: 2

20 Dec 1996

5975-14-383-9501
Cable Marker Sleeve

143839501
78-15CXZ5S30LAB148JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ5S30JLAB148: RNCC: 5 | RNVC: 2
78-15CXZ5S30LAB148J: RNCC: 5 | RNVC: 2

4 May 1983

5975-14-434-9312
Conduit Outlet

144349312
120130-610: RNCC: 3 | RNVC: 9

10 Oct 1989

5975-27-045-9410
Raceway Cover

270459410
002 55 000001: RNCC: 2 | RNVC: 1
002 55 000001: RNCC: 5 | RNVC: 9

23 Jun 2009

5975-14-462-4366
Metallic Raceway

144624366
LN400 019REPB7: RNCC: 3 | RNVC: 2

20 Apr 1993

5975-14-524-0283
Cable Marker Sleeve

145240283
2424-39: RNCC: 3 | RNVC: 2

22 Feb 2001

5975-14-420-0545
Cable Marker Sleeve

144200545
BJM07348: RNCC: 3 | RNVC: 2

18 Nov 1987

5975-14-345-0069
Conduit Outlet

143450069
001376282P: RNCC: 3 | RNVC: 2

5 Oct 1977

5975-14-448-4044
Blank Panel

144484044
90DD222201: RNCC: 3 | RNVC: 2

26 Jun 1991

5975-14-550-2992
Metallic Raceway

145502992
MC3286F00: RNCC: 3 | RNVC: 2

15 Jun 2006

5975-14-402-6122
Cable Marker Sleeve

144026122
TMSNR501CBLANC: RNCC: 3 | RNVC: 9
12451236-1: RNCC: 5 | RNVC: 2

19 Jul 1985

5975-14-515-8587
Stuffing Tube

145158587
410970: RNCC: 3 | RNVC: 2

18 Aug 1999

5975-15-163-1050
Blank Panel

151631050
3AN41001AA**: RNCC: 3 | RNVC: 2

1 Jul 2002

5975-14-031-2796
Cable Marker Sleeve

140312796
BJM08476: RNCC: 3 | RNVC: 2

14 Jun 1980

5975-14-405-0533
Junction Box

144050533
891-31-35: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-490-1669
Junction Box

144901669
121E575-00: RNCC: 3 | RNVC: 2
121E575-00: RNCC: 5 | RNVC: 9
F300 0T 020 1192: RNCC: 6 | RNVC: 9

17 Sep 1997

5975-14-487-1203
Chassis Base

144871203
SR830: RNCC: 3 | RNVC: 2

10 Apr 1997

5975-14-514-8991
Cable Marker Sleeve

145148991
10282418: RNCC: 3 | RNVC: 2

23 Jun 1999

5975-14-531-5557
Raceway Cover

145315557
14024: RNCC: 3 | RNVC: 2

28 Aug 2002

5975-14-475-3176
Cable Marker Sleeve

144753176
HT100-35JORW043702: RNCC: 3 | RNVC: 2
HT100-35JOW043702: RNCC: 5 | RNVC: 2

29 Mar 1995

5975-14-438-2719
Junction Box

144382719
815-1-71-900: RNCC: 3 | RNVC: 2

12 Mar 1990

5975-14-405-1033
Cable Marker Sleeve

144051033
362009-01SYMB0LETERRE: RNCC: 3 | RNVC: 2
M16BLANCSYMB0LETERRE: RNCC: 5 | RNVC: 2

20 Nov 1985

5975-14-402-1111
Cable Marker Sleeve

144021111
401622: RNCC: 3 | RNVC: 2
BGE401622: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-553-4678
Cable Marker Sleeve

145534678
0084106020: RNCC: 3 | RNVC: 2

5 Apr 2007

5975-14-489-1458
Junction Box

144891458
51054: RNCC: 3 | RNVC: 2

27 Jun 1997

5975-14-300-2910
Stuffing Tube Plug

143002910
R110462: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-483-7805
Blank Panel

144837805
511ST0040-1: RNCC: 3 | RNVC: 2

3 Oct 1996

5975-14-266-8036
Pothead

142668036
D100: RNCC: 3 | RNVC: 2

1 Jan 1970

5975-14-344-2150
Cable Collar

143442150
STEL533: RNCC: 3 | RNVC: 2

10 Aug 1977

5975-14-268-0102
Stuffing Tube

142680102
823D66CS8N0RMALE: RNCC: 2 | RNVC: 2
5975BA-CS8L: RNCC: 5 | RNVC: 2

1 Jan 1970

5975-14-483-1278
Interconnecting Box

144831278
46084016: RNCC: 3 | RNVC: 2

10 Aug 1996

5975-14-416-7259
Cable Marker Sleeve

144167259
HT15-25BA11-090: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-479-1140
Ground Rod

144791140
01-1017-67: RNCC: 3 | RNVC: 2

13 Dec 1995

5975-14-445-0333
Cable Marker Sleeve

144450333
1-078: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-339-4401
Cable Marker Sleeve

143394401
620-844-149-0: RNCC: 3 | RNVC: 2
620-844-149-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-508-5095
Crossarm Brace

145085095
21240327-00: RNCC: 3 | RNVC: 2
21240327-4: RNCC: 5 | RNVC: 2

16 Sep 1998

5975-14-401-3729
Stuffing Tube

144013729
08821: RNCC: 3 | RNVC: 2
821: RNCC: 5 | RNVC: 2

5 Jun 1985

5975-14-382-9286
Nonmetallic Raceway

143829286
4770202690: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-238-2729
Cable Marker Sleeve

142382729
352004REP1: RNCC: 3 | RNVC: 2
99008778: RNCC: 3 | RNVC: 2
99008778: RNCC: 5 | RNVC: 2
352-04REP1: RNCC: 5 | RNVC: 2
HELAVIATWIN3REP1: RNCC: 5 | RNVC: 2
RAR4639: RNCC: 5 | RNVC: 2
99008778: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-426-4876
Cable Marker Sleeve

144264876
WBS3-+: RNCC: 3 | RNVC: 2

1 Sep 1988

5975-14-453-5816
Cable Marker Sleeve

144535816
BAZ11742: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-314-4442
Junction Box

143144442
3511-190-53181: RNCC: 3 | RNVC: 2
3511 190 53181: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-371-3280
Push Button

143713280
00103082: RNCC: 3 | RNVC: 2
CEF54: RNCC: 5 | RNVC: 2

5 Aug 1981

5975-14-520-2340
Interconnecting Box

145202340
10330615: RNCC: 3 | RNVC: 2

17 May 2000

5975-14-457-8602
Blank Panel

144578602
T1034AB12: RNCC: 3 | RNVC: 2
T1034AB12: RNCC: 5 | RNVC: 9
5046403: RNCC: 5 | RNVC: 9

24 Sep 1992

5975-14-326-6555
Junction Box

143266555
1DP522PE2: RNCC: 3 | RNVC: 2
1DP52-2PE2: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-328-9395
Junction Box

143289395
04416: RNCC: 3 | RNVC: 2
4416: RNCC: 5 | RNVC: 2
251-5093: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-339-4409
Cable Marker Sleeve

143394409
620-844-158-0: RNCC: 3 | RNVC: 2
620-844-158-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-15-187-6073
Junction Box

151876073
100-1183/03: RNCC: 3 | RNVC: 2

14 Apr 2009

5975-14-309-6662
Access Cover

143096662
121B63-245-50-07: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-352-0418
Cable Marker Sleeve

143520418
NO PRIMARY REF14-352-0418: RNCC: 3 | RNVC: 2
9560115520: RNCC: 5 | RNVC: 2
35583-2: RNCC: 5 | RNVC: 9

16 Oct 1978

5975-14-332-1615
Push Button

143321615
LUF44F3550-17815AV3: RNCC: 3 | RNVC: 2
17815AV3: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-14-403-0830
Stuffing Tube

144030830
98017: RNCC: 3 | RNVC: 2

25 Jul 1985

5975-14-461-3233
Cable Hanger

144613233
LN400010REPJ2: RNCC: 3 | RNVC: 2
LN400-010F17REPJ2: RNCC: 5 | RNVC: 2
RAB2902: RNCC: 5 | RNVC: 2

8 Mar 1993

5975-14-518-1899
Interconnecting Box

145181899
7701996146: RNCC: 3 | RNVC: 2

26 Jan 2000

5975-14-527-3443
Interconnecting Box

145273443
19204197: RNCC: 3 | RNVC: 2

24 Oct 2001

5975-14-400-2748
Junction Box

144002748
3000548: RNCC: 3 | RNVC: 2

24 Apr 1985

5975-14-519-9953
Interconnecting Box

145199953
46304777: RNCC: 3 | RNVC: 2
46304777: RNCC: 5 | RNVC: 2

3 May 2000

5975-33-002-3839
Chassis Base

330023839
SV 400: RNCC: 3 | RNVC: 2

1 Feb 1995

5975-14-553-4698
Cable Marker Sleeve

145534698
0084106010: RNCC: 3 | RNVC: 2

5 Apr 2007

5975-14-485-7987
Cable Collar

144857987
443402: RNCC: 3 | RNVC: 2
443402-001: RNCC: 5 | RNVC: 9

12 Feb 1997

Load More Results