What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 125 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 125of 491

5975-14-453-7421
Interconnecting Box

144537421
89436034: RNCC: 3 | RNVC: 2
022748F: RNCC: 3 | RNVC: 2
89436034: RNCC: 5 | RNVC: 9

5 Mar 1992

5975-27-019-4281
Cable Marker Sleeve

270194281
10091MN0019: RNCC: 2 | RNVC: 1

15 Nov 2003

5975-14-448-4036
Blank Panel

144484036
90DD236201: RNCC: 3 | RNVC: 2

26 Jun 1991

5975-14-474-8672
Cable Marker Sleeve

144748672
ML1217A00: RNCC: 3 | RNVC: 2

8 Mar 1995

5975-14-465-3522
Cable Marker Sleeve

144653522
ST406M52P743: RNCC: 3 | RNVC: 2

22 Sep 1993

5975-14-346-1698
Guy

143461698
130451: RNCC: 3 | RNVC: 2

12 Dec 1977

5975-14-466-0736
Cable Marker Sleeve

144660736
PR48302-779: RNCC: 3 | RNVC: 2
PR48302-779: RNCC: 5 | RNVC: 2

27 Oct 1993

5975-14-409-0353
Cable Marker Sleeve

144090353
P10-3-2JOV: RNCC: 3 | RNVC: 2
P10-3-2JORVNR: RNCC: 5 | RNVC: 2
12450696-7: RNCC: 5 | RNVC: 2

16 Apr 1986

5975-14-507-3384
Interconnecting Box

145073384
854733-100: RNCC: 3 | RNVC: 2
854733-100: RNCC: 5 | RNVC: 2

29 Jun 1998

5975-14-226-8491
Junction Box

142268491
11-000-100: RNCC: 3 | RNVC: 2

1 Jan 1966

5975-14-440-8622
Cable Marker Sleeve

144408622
03620050001B: RNCC: 3 | RNVC: 2
3597470048016: RNCC: 5 | RNVC: 2
362050-01REPB: RNCC: 5 | RNVC: 2
362050REPB: RNCC: 5 | RNVC: 2
M65BLANCREPB: RNCC: 5 | RNVC: 2

31 Jul 1990

5975-14-326-9856
Stuffing Tube

143269856
M208-27066: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-337-5091
Blank Panel

143375091
20006: RNCC: 3 | RNVC: 2
520864G0003: RNCC: 5 | RNVC: 2

7 Oct 1976

5975-14-541-2367
Interconnecting Box

145412367
222762: RNCC: 3 | RNVC: 2

19 May 2004

5975-14-485-2372
Blank Panel

144852372
94095: RNCC: 3 | RNVC: 2
94095: RNCC: 5 | RNVC: 2

13 Jan 1997

5975-14-383-2996
Cable Marker Sleeve

143832996
24393: RNCC: 3 | RNVC: 2

11 Apr 1983

5975-14-554-8357
Stuffing Tube

145548357
509500: RNCC: 3 | RNVC: 2

29 Aug 2007

5975-15-068-1428
Cable Marker Sleeve

150681428
F492A3-5-06: RNCC: 3 | RNVC: 2

31 Mar 1986

5975-14-265-0993
Interconnecting Box

142650993
SY3424C: RNCC: 3 | RNVC: 2
SY3424B1-5: RNCC: 5 | RNVC: 2
67-843-002-01: RNCC: 5 | RNVC: 2
4011554: RNCC: 5 | RNVC: 2
SY3424C1-5-58W: RNCC: 5 | RNVC: 2
SY3424C: RNCC: 5 | RNVC: 9
SY3424C1-5-58W: RNCC: 5 | RNVC: 9
4011554: RNCC: 5 | RNVC: 9
SY3424B1-5: RNCC: 5 | RNVC: 9
85-642-1590: RNCC: 6 | RNVC: 9

1 Jan 1970

5975-33-206-0600
Cable Marker Sleeve

332060600
MMN461-3-B: RNCC: 3 | RNVC: 2
2910-33-M30-3428: RNCC: 6 | RNVC: 9

17 Jul 2007

5975-14-362-6080
Cable Marker Sleeve

143626080
360110REPD: RNCC: 3 | RNVC: 2
V65REPD: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-439-9784
Blank Panel

144399784
8152356: RNCC: 3 | RNVC: 2

29 Jun 1990

5975-14-373-6102
Cable Marker Sleeve

143736102
362105REPF: RNCC: 3 | RNVC: 2
BBZ2207: RNCC: 5 | RNVC: 2

13 Nov 1981

5975-14-254-1148
Cable Marker Sleeve

142541148
352004REPA: RNCC: 3 | RNVC: 2
HELAVIATWIN3REPA: RNCC: 5 | RNVC: 2
99008763: RNCC: 5 | RNVC: 2
99008763: RNCC: 5 | RNVC: 9
99008763: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-547-4595
Cable Marker Sleeve

145474595
5001865850: RNCC: 3 | RNVC: 2

13 Oct 2005

5975-14-541-5692
Metallic Raceway

145415692
21166: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-520-5561
Junction Box

145205561
45827528: RNCC: 3 | RNVC: 9

22 May 2000

5975-14-415-7229
Cable Marker Sleeve

144157229
SLP20-10J0R15NR: RNCC: 3 | RNVC: 2
620-867-015-0: RNCC: 5 | RNVC: 2

18 May 1987

5975-14-386-4788
Cable Marker Sleeve

143864788
320-048-001-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5975-14-440-5143
Cable Marker Sleeve

144405143
20130525: RNCC: 3 | RNVC: 2
20130525: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-435-1400
Stuffing Tube

144351400
120704: RNCC: 3 | RNVC: 2

23 Oct 1989

5975-14-254-1117
Cable Marker Sleeve

142541117
352001REPX: RNCC: 3 | RNVC: 2
HELAVIATWIN0REPX: RNCC: 5 | RNVC: 2

1 Jan 1969

5975-14-358-9176
Runner

143589176
25380: RNCC: 3 | RNVC: 2
650865: RNCC: 5 | RNVC: 2

7 Sep 1979

5975-14-482-7901
Blank Panel

144827901
1109581A00: RNCC: 3 | RNVC: 2

25 Jul 1996

5975-14-384-6631
Cable Marker Sleeve

143846631
96080786: RNCC: 3 | RNVC: 2

2 Jun 1983

5975-14-406-2814
Junction Box Cover

144062814
29737986: RNCC: 3 | RNVC: 2
29737986: RNCC: 5 | RNVC: 9

8 Jan 1986

5975-14-353-7447
Access Cover

143537447
X040-017-1: RNCC: 3 | RNVC: 9

16 Jan 1979

5975-14-501-6649
Cable Marker Sleeve

145016649
370103-04REP7: RNCC: 3 | RNVC: 2
91633950: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-14-299-1246
Anchor Strap

142991246
121E63-426-14-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-472-3268
Guy

144723268
DHV19516-45: RNCC: 3 | RNVC: 2

19 Oct 1994

5975-33-002-7022
Chassis Base

330027022
6ES5 135-3UA11: RNCC: 3 | RNVC: 2

26 Jul 1995

5975-14-546-1359
Raceway Elbow

145461359
48192: RNCC: 3 | RNVC: 2
AA016646: RNCC: 6 | RNVC: 9

14 Jun 2005

5975-14-465-8389
Junction Box

144658389
46041413: RNCC: 3 | RNVC: 2

14 Oct 1993

5975-14-490-3194
Interconnecting Box

144903194
BR2A: RNCC: 3 | RNVC: 2

24 Sep 1997

5975-14-470-2378
Interconnecting Box

144702378
1302240N001: RNCC: 3 | RNVC: 2

8 Jun 1994

5975-14-254-1146
Cable Marker Sleeve

142541146
03520003004Y: RNCC: 3 | RNVC: 2
HELAVIATWIN2REPY: RNCC: 5 | RNVC: 2
352003REPY: RNCC: 5 | RNVC: 2

1 Jan 1969

5975-14-527-9518
Cable Marker Sleeve

145279518
0353-0041-001REPF: RNCC: 3 | RNVC: 2

5 Dec 2001

5975-14-289-1820
Cable Marker Sleeve

142891820
MGCM3BA10-10: RNCC: 3 | RNVC: 2
9554819100: RNCC: 5 | RNVC: 2
MGCM3BA10-10: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-499-4438
Cable Marker Sleeve

144994438
5600023-060380-000-0-12: RNCC: 3 | RNVC: 2
5600023-060380.000.0-12: RNCC: 5 | RNVC: 2
F300 0T 022 0976: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-545-9713
Cable Marker Sleeve

145459713
03740140004O: RNCC: 3 | RNVC: 2
03740140004O: RNCC: 5 | RNVC: 2
6070-GT-0000100: RNCC: 5 | RNVC: 9

31 May 2005

5975-14-451-7544
Cable Marker Sleeve

144517544
PR72-48266: RNCC: 3 | RNVC: 2

4 Dec 1991

5975-27-029-7957
Metallic Raceway

270297957
GNY-400-40: RNCC: 2 | RNVC: 1

17 May 2006

5975-14-278-3597
Rigid Metal Conduit

142783597
160-79221-10: RNCC: 3 | RNVC: 2

1 Jan 1971

5975-14-551-0273
Ground Rod

145510273
155240: RNCC: 3 | RNVC: 2

22 Aug 2006

5975-14-533-4913
Stuffing Tube

145334913
45089181: RNCC: 3 | RNVC: 2

5 Feb 2003

5975-14-465-8554
Cable Marker Sleeve

144658554
HOI40-4VO7: RNCC: 3 | RNVC: 2
HOI40-7: RNCC: 3 | RNVC: 2
HOI40-7-VIOLET: RNCC: 5 | RNVC: 2

14 Oct 1993

5975-14-528-7583
Cable Hanger

145287583
78765A040-028: RNCC: 3 | RNVC: 2

14 Feb 2002

5975-14-527-9521
Cable Marker Sleeve

145279521
0353-0041-001REPM: RNCC: 3 | RNVC: 2

5 Dec 2001

5975-33-108-3971
Cable Marker Sleeve

331083971
Q 314 196 207: RNCC: 3 | RNVC: 2

1 Mar 2001

5975-14-332-1618
Push Button

143321618
LUF44F3550-17816AV1: RNCC: 3 | RNVC: 2
17816AV1: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-14-348-2474
Blank Panel

143482474
CPRP5002: RNCC: 3 | RNVC: 2

29 Mar 1978

5975-14-308-8001
Ground Rod

143088001
NO PRIMARY REF14-308-8001: RNCC: 3 | RNVC: 2
9452-01PIQUETTERRE: RNCC: 5 | RNVC: 9

1 Jan 1974

5975-14-368-5623
Cable Marker Sleeve

143685623
036200050013: RNCC: 3 | RNVC: 2
T286-456: RNCC: 5 | RNVC: 2
3597470045596: RNCC: 5 | RNVC: 2
362005-05REP3: RNCC: 5 | RNVC: 2
362005REP3: RNCC: 5 | RNVC: 2
M37-0RANGEREP3: RNCC: 5 | RNVC: 2
H050-60R3: RNCC: 5 | RNVC: 9

20 Feb 1981

5975-14-254-1079
Cable Marker Sleeve

142541079
352004REP2: RNCC: 3 | RNVC: 2
99008779: RNCC: 3 | RNVC: 2
99008779: RNCC: 5 | RNVC: 2
352-04REP2: RNCC: 5 | RNVC: 2
HELAVIATWIN3REP2: RNCC: 5 | RNVC: 2
RAR4643: RNCC: 5 | RNVC: 2
99008779: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-15-009-6989
Blank Panel

150096989
191-0465/01: RNCC: 3 | RNVC: 2

14 Jan 1981

5975-14-373-6245
Cable Marker Sleeve

143736245
7815CXZ7S30KD1887AJ: RNCC: 3 | RNVC: 2
204336-1887A: RNCC: 5 | RNVC: 2

13 Nov 1981

5975-14-350-3712
Push Button

143503712
275-100-0201RM: RNCC: 3 | RNVC: 2

12 Jul 1978

5975-14-339-4394
Cable Marker Sleeve

143394394
620-844-138-0: RNCC: 3 | RNVC: 2
620-844-138-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-305-3444
Push Button

143053444
1106504-DGBG: RNCC: 3 | RNVC: 2
B0UT0N10VERTGRAVED: RNCC: 5 | RNVC: 2
1106504DGBG: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-445-0376
Cable Marker Sleeve

144450376
1-138: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-33-190-3768
Conduit Outlet

331903768
40.20.77: RNCC: 3 | RNVC: 2

20 Jul 1995

5975-14-555-2300
Stuffing Tube

145552300
534202: RNCC: 3 | RNVC: 2
BVP2: RNCC: 5 | RNVC: 2

11 Oct 2007

5975-14-541-9020
Blank Panel

145419020
1908164: RNCC: 3 | RNVC: 2

2 Jul 2004

5975-14-457-6888
Cable Collar

144576888
1-00400400: RNCC: 3 | RNVC: 2

15 Sep 1992

5975-14-305-8376
Conduit Outlet

143058376
04145: RNCC: 3 | RNVC: 2
4145: RNCC: 5 | RNVC: 2
251-5037: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-404-7329
Cable Marker Sleeve

144047329
39210565: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-404-8381
Cable Marker Sleeve

144048381
29747481: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-456-4355
Cable Marker Sleeve

144564355
H040-40R3: RNCC: 3 | RNVC: 2

2 Jul 1992

5975-15-158-0056
Cable Marker Sleeve

151580056
15415A119970: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-422-3953
Junction Box

144223953
39563610: RNCC: 3 | RNVC: 2
39563610: RNCC: 5 | RNVC: 9

3 Mar 1988

5975-14-031-8573
Interior Cable Rack

140318573
60X60C: RNCC: 3 | RNVC: 2
574025131: RNCC: 5 | RNVC: 2

5 Jul 1980

5975-14-339-4475
Cable Marker Sleeve

143394475
620-849-069-0: RNCC: 3 | RNVC: 2
620-849-069-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-550-6637
Junction Box

145506637
140-058XMS002: RNCC: 3 | RNVC: 9

6 Jul 2006

5975-14-358-7311
Stuffing Tube Plug

143587311
2339-242-25: RNCC: 3 | RNVC: 2
2339-242-25: RNCC: 5 | RNVC: 9

7 Sep 1979

5975-14-509-2169
Metallic Raceway

145092169
46238253: RNCC: 3 | RNVC: 2

21 Oct 1998

5975-14-512-8856
Cable Marker Sleeve

145128856
550565: RNCC: 3 | RNVC: 2

24 Feb 1999

5975-27-008-5187
Pothead

270085187
83.25470.0003: RNCC: 2 | RNVC: 1

25 Oct 2000

5975-15-008-6365
Insulator Pin

150086365
1409: RNCC: 3 | RNVC: 2
4-08947.0000//N: RNCC: 5 | RNVC: 2
4-08947.0000//N: RNCC: 5 | RNVC: 9

21 May 1981

5975-14-409-0367
Cable Marker Sleeve

144090367
P15-3-2JOE: RNCC: 3 | RNVC: 2
P15-3-2JORENR: RNCC: 5 | RNVC: 2
12450841-1: RNCC: 5 | RNVC: 2

16 Apr 1986

5975-14-537-5665
Cable Marker Sleeve

145375665
735220-1: RNCC: 3 | RNVC: 2

5 Nov 2003

5975-14-384-3605
Push Button

143843605
BMC1-1-002N: RNCC: 3 | RNVC: 9

4 May 1983

5975-14-431-2225
Push Button

144312225
V42CK10: RNCC: 3 | RNVC: 9

12 Apr 1989

5975-33-106-8751
Junction Box

331068751
7356.592.0850: RNCC: 3 | RNVC: 2
2510009610: RNCC: 5 | RNVC: 2

29 Mar 1999

5975-14-421-2273
Stuffing Tube

144212273
2059940: RNCC: 3 | RNVC: 2

11 Jan 1988

5975-14-349-3490
Runner

143493490
16398854: RNCC: 3 | RNVC: 2
16398854: RNCC: 3 | RNVC: 9

22 May 1978

5975-33-108-4286
Interconnecting Box

331084286
9644.590.0840: RNCC: 3 | RNVC: 2
2510010628: RNCC: 5 | RNVC: 2
2510010628: RNCC: 5 | RNVC: 2

2 Apr 2001

5975-15-158-0247
Cable Marker Sleeve

151580247
47915A139270: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-268-0125
Stuffing Tube

142680125
823D66BVP1: RNCC: 2 | RNVC: 2
50512: RNCC: 3 | RNVC: 2

1 Jan 1970

5975-14-440-5041
Cable Marker Sleeve

144405041
20130546: RNCC: 3 | RNVC: 2
20130546: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-33-200-9060
Stuffing Tube

332009060
5975900001: RNCC: 3 | RNVC: 2

15 Apr 2002

5975-14-421-2625
Stuffing Tube

144212625
438573/1: RNCC: 3 | RNVC: 2
395400-02: RNCC: 5 | RNVC: 2

12 Jan 1988

5975-14-402-8833
Pothead

144028833
99D4: RNCC: 3 | RNVC: 2
5970-A1-000-0044: RNCC: 6 | RNVC: 9

19 Jul 1985

5975-14-402-2431
Conduit Outlet

144022431
972-1-32-202: RNCC: 3 | RNVC: 2

26 Jun 1985

5975-14-328-9399
Junction Box

143289399
04440: RNCC: 3 | RNVC: 2
4440: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-355-2541
Conduit Outlet

143552541
525700: RNCC: 3 | RNVC: 2
00525700: RNCC: 5 | RNVC: 2

19 Mar 1979

5975-14-489-1465
Junction Box

144891465
51049: RNCC: 3 | RNVC: 2

27 Jun 1997

5975-14-404-8368
Cable Marker Sleeve

144048368
29747468: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-528-3134
Stuffing Tube

145283134
1237111: RNCC: 3 | RNVC: 2
SYB4415: RNCC: 5 | RNVC: 2

21 Jan 2002

5975-14-382-6237
Cable Marker Sleeve

143826237
96080545: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-402-1080
Cable Marker Sleeve

144021080
401589: RNCC: 3 | RNVC: 2
BGE401589: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-420-7477
Cable Marker Sleeve

144207477
ST400S58P201-111: RNCC: 3 | RNVC: 2
1-111: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-312-8099
Stuffing Tube Plug

143128099
5975CA0B2: RNCC: 2 | RNVC: 2
509240: RNCC: 3 | RNVC: 2
350927: RNCC: 5 | RNVC: 2
5975CA-OB2: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-501-6871
Cable Marker Sleeve

145016871
370101-04REP1: RNCC: 3 | RNVC: 2
91682541: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-14-515-9292
Blank Panel

145159292
TOL01088: RNCC: 3 | RNVC: 2

26 Aug 1999

5975-14-554-5979
Cable Marker Sleeve

145545979
0084302070: RNCC: 3 | RNVC: 2

24 Jul 2007

5975-14-363-9460
Stuffing Tube

143639460
331930: RNCC: 3 | RNVC: 2
331930: RNCC: 5 | RNVC: 9

7 Aug 1980

5975-14-440-4978
Cable Marker Sleeve

144404978
20315451: RNCC: 3 | RNVC: 2
20315451: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-527-0074
Interconnecting Box

145270074
5812256S00: RNCC: 3 | RNVC: 2

24 Sep 2001

5975-14-325-3719
Stuffing Tube

143253719
511EL0605REP2: RNCC: 3 | RNVC: 2
511EL605REP2: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-493-6212
Interconnecting Box

144936212
HSS630BCD: RNCC: 3 | RNVC: 9
HSS630BCD: RNCC: 5 | RNVC: 9
F300 0T 013 9603: RNCC: 6 | RNVC: 9

8 Oct 1997

5975-14-383-0033
Nonmetallic Raceway

143830033
4770202540: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-474-5368
Insulator Bracket

144745368
2014924L: RNCC: 3 | RNVC: 2

22 Feb 1995

5975-14-546-8946
Stuffing Tube

145468946
095643: RNCC: 3 | RNVC: 2

2 Sep 2005

5975-14-440-5157
Cable Marker Sleeve

144405157
20130485: RNCC: 3 | RNVC: 2
20130485: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-440-5053
Cable Marker Sleeve

144405053
20130543: RNCC: 3 | RNVC: 2
20130543: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-403-7237
Access Cover

144037237
1844A05: RNCC: 3 | RNVC: 2

21 Aug 1985

5975-14-425-4642
Cable Marker Sleeve

144254642
20130274: RNCC: 3 | RNVC: 2
20130274: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-14-354-6859
Junction Box

143546859
001C1-100: RNCC: 3 | RNVC: 2

31 Jan 1979

5975-14-386-4790
Cable Marker Sleeve

143864790
320-048-201-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5975-14-466-0700
Cable Marker Sleeve

144660700
PR176-48302: RNCC: 3 | RNVC: 2

27 Oct 1993

5975-14-449-1434
Junction Box

144491434
BAZ9624: RNCC: 3 | RNVC: 2

31 Jul 1991

5975-14-347-4115
Cable Marker Sleeve

143474115
7815CXY12S22J: RNCC: 3 | RNVC: 2
78-15CXY12S22J: RNCC: 5 | RNVC: 2

1 Mar 1978

5975-14-512-1687
Ground Rod

145121687
93038.7000: RNCC: 3 | RNVC: 2
AS2-0.010.238: RNCC: 3 | RNVC: 2
93039.7000: RNCC: 5 | RNVC: 2

4 Feb 1999

5975-15-158-0551
Cable Marker Sleeve

151580551
15415H110370: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-254-1141
Cable Marker Sleeve

142541141
03520003004T: RNCC: 3 | RNVC: 2
HELAVIATWIN2REPT: RNCC: 5 | RNVC: 2
352003REPT: RNCC: 5 | RNVC: 2

1 Jan 1969

5975-14-340-0961
Junction Box

143400961
16795306: RNCC: 3 | RNVC: 2

18 Jan 1977

5975-14-336-5055
Interior Cable Rack

143365055
GF66: RNCC: 3 | RNVC: 2

14 Aug 1976

5975-14-363-2284
Push Button

143632284
161010161R: RNCC: 3 | RNVC: 2
161010161R: RNCC: 5 | RNVC: 2
85-691-0727: RNCC: 5 | RNVC: 2

3 Apr 1980

5975-14-483-5663
Interconnecting Box

144835663
1353-360-000: RNCC: 3 | RNVC: 2

19 Sep 1996

5975-14-449-5784
Junction Box

144495784
09-12-12-09: RNCC: 3 | RNVC: 2
09121209: RNCC: 3 | RNVC: 2
9121209: RNCC: 5 | RNVC: 2

27 Aug 1991

5975-27-053-8367
Blank Panel

270538367
C172-000010: RNCC: 2 | RNVC: 2

28 Jun 2011

5975-14-459-7775
Metallic Raceway

144597775
TB3011002: RNCC: 3 | RNVC: 2

17 Dec 1992

5975-14-342-4937
Metallic Raceway

143424937
4770001740: RNCC: 3 | RNVC: 2

16 May 1977

5975-14-238-2703
Cable Marker Sleeve

142382703
03520003004J: RNCC: 3 | RNVC: 2
99008756: RNCC: 5 | RNVC: 2
HELAVIATWIN2REPJ: RNCC: 5 | RNVC: 2
99008756: RNCC: 5 | RNVC: 2
352003REPJ: RNCC: 5 | RNVC: 2
99008756: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-360-5600
Cable Marker Sleeve

143605600
16564550: RNCC: 3 | RNVC: 2
16564550: RNCC: 5 | RNVC: 9

23 Nov 1979

5975-27-056-5743
Cable Marker Sleeve

270565743
517030: RNCC: 5 | RNVC: 9

11 Apr 2012

5975-14-465-3525
Cable Marker Sleeve

144653525
ST406M52P746: RNCC: 3 | RNVC: 2

22 Sep 1993

5975-14-356-9289
Cable Marker Sleeve

143569289
03600106015T: RNCC: 3 | RNVC: 2
3597470037515: RNCC: 5 | RNVC: 2
360106REPT: RNCC: 5 | RNVC: 2
V37REPT: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-339-4471
Cable Marker Sleeve

143394471
620-849-062-0: RNCC: 3 | RNVC: 2
620-849-062-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-520-3269
Cable Marker Sleeve

145203269
TMS1-2NR12S90-9: RNCC: 3 | RNVC: 9

17 May 2000

5975-33-005-3695
Cable Marker Sleeve

330053695
5975000962: RNCC: 3 | RNVC: 2

16 Jul 2001

5975-14-384-6482
Rigid Metal Conduit

143846482
20189517: RNCC: 3 | RNVC: 2
20189517: RNCC: 5 | RNVC: 9

2 Jun 1983

5975-14-339-4417
Cable Marker Sleeve

143394417
620-844-236-0: RNCC: 3 | RNVC: 2
620-844-236-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-415-7228
Cable Marker Sleeve

144157228
SLP20-10J0R14NR: RNCC: 3 | RNVC: 2
620-867-014-0: RNCC: 5 | RNVC: 2

18 May 1987

5975-15-122-1609
Cable Collar

151221609
H6161: RNCC: 3 | RNVC: 2
890TP0068: RNCC: 5 | RNVC: 2

28 May 1996

5975-15-002-6755
Blank Panel

150026755
RAC-6444/01: RNCC: 3 | RNVC: 2

25 Sep 2013

5975-14-420-7530
Cable Marker Sleeve

144207530
ST400S58P202-056: RNCC: 3 | RNVC: 2
2-056: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-520-3274
Cable Marker Sleeve

145203274
TMS3-32NR13S90-9: RNCC: 3 | RNVC: 9

17 May 2000

5975-15-145-0062
Rigid Metal Conduit

151450062
A6162-94001-5: RNCC: 3 | RNVC: 2

13 Mar 1997

5975-14-453-5777
Cable Marker Sleeve

144535777
BAZ9457: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-27-018-8901
Cable Collar

270188901
11051YK0423: RNCC: 2 | RNVC: 1

15 Nov 2003

5975-14-428-3068
Blank Panel

144283068
6060744: RNCC: 3 | RNVC: 2
6060744: RNCC: 5 | RNVC: 2

8 Dec 1988

5975-14-513-2617
Blank Panel

145132617
NM30567: RNCC: 3 | RNVC: 2
EN11441: RNCC: 5 | RNVC: 2

10 Mar 1999

5975-14-394-5685
Junction Box

143945685
263E64346111000009: RNCC: 3 | RNVC: 2

28 Aug 1984

5975-14-409-1419
Junction Box

144091419
CR18: RNCC: 3 | RNVC: 2
9580110240: RNCC: 5 | RNVC: 2
92E0485: RNCC: 5 | RNVC: 2
91603999: RNCC: 5 | RNVC: 2
CR18: RNCC: 5 | RNVC: 9

16 Apr 1986

5975-14-453-5741
Cable Marker Sleeve

144535741
BAZ9678: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-404-8917
Nonmetallic Raceway

144048917
366A87-1008-01: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-465-8266
Cable Marker Sleeve

144658266
PR168-48302: RNCC: 3 | RNVC: 2

14 Oct 1993

5975-14-405-0224
Push Button

144050224
ZB2BW37: RNCC: 3 | RNVC: 2
0218582G00: RNCC: 5 | RNVC: 2
981767/7: RNCC: 5 | RNVC: 2
3389110614169: RNCC: 5 | RNVC: 2
5546004: RNCC: 5 | RNVC: 9
ZB2BW37: RNCC: 5 | RNVC: 9
85-692-8243: RNCC: 6 | RNVC: 9

20 Nov 1985

5975-14-421-2290
Interior Cable Rack

144212290
547536: RNCC: 3 | RNVC: 2
CF54/100: RNCC: 3 | RNVC: 2
101057: RNCC: 3 | RNVC: 9
CF54/100: RNCC: 5 | RNVC: 2

11 Jan 1988

5975-14-361-1606
Push Button

143611606
164595: RNCC: 3 | RNVC: 2

24 Jan 1980

5975-14-362-6028
Cable Marker Sleeve

143626028
03600101015D: RNCC: 3 | RNVC: 2
360101REPD: RNCC: 5 | RNVC: 2
V09REPD: RNCC: 5 | RNVC: 2
3597470035085: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-400-0259
Junction Box

144000259
105677: RNCC: 3 | RNVC: 2
105677: RNCC: 5 | RNVC: 2

24 Apr 1985

5975-14-430-0909
Metallic Raceway

144300909
ST406M52P757: RNCC: 3 | RNVC: 2

1 Mar 1989

5975-14-481-1741
Switch Box Case

144811741
6196-13-01186: RNCC: 3 | RNVC: 2

24 Apr 1996

5975-14-342-1373
Cable Marker Sleeve

143421373
S272237-14: RNCC: 3 | RNVC: 2
85-680-9731: RNCC: 6 | RNVC: 9

14 Apr 1977

5975-14-278-3590
Rigid Metal Conduit

142783590
160-79221-03: RNCC: 3 | RNVC: 2

1 Jan 1971

5975-14-504-6277
Guide Rail

145046277
A09090305: RNCC: 3 | RNVC: 2
A09090305: RNCC: 5 | RNVC: 9

25 Feb 1998

5975-14-532-7063
Switch Box Case

145327063
01706: RNCC: 3 | RNVC: 2

4 Dec 2002

5975-14-554-8409
Stuffing Tube

145548409
500200: RNCC: 3 | RNVC: 2

30 Aug 2007

5975-14-481-4753
Switch Box Case

144814753
231-160-3: RNCC: 3 | RNVC: 2

8 May 1996

5975-14-356-9257
Cable Marker Sleeve

143569257
03600105015X: RNCC: 3 | RNVC: 2
3597470037133: RNCC: 5 | RNVC: 2
360105REPX: RNCC: 5 | RNVC: 2
V27REPX: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-457-8372
Cable Marker Sleeve

144578372
PR48302-590: RNCC: 3 | RNVC: 2

24 Sep 1992

5975-14-419-1152
Junction Box

144191152
ET32469D: RNCC: 3 | RNVC: 9
BJ-240A: RNCC: 6 | RNVC: 9

30 Sep 1987

5975-14-448-9451
Interconnecting Box

144489451
5010043280: RNCC: 3 | RNVC: 2

24 Jul 1991

5975-14-383-3004
Cable Marker Sleeve

143833004
24401: RNCC: 3 | RNVC: 2

11 Apr 1983

5975-14-519-1799
Metallic Raceway

145191799
4SH41629106: RNCC: 3 | RNVC: 2

10 Mar 2000

5975-14-526-5119
Cable Marker Sleeve

145265119
D65377-23: RNCC: 3 | RNVC: 2

1 Aug 2001

5975-14-281-1797
Cable Collar

142811797
651-06: RNCC: 3 | RNVC: 2

1 Jan 1971

5975-14-368-5647
Cable Marker Sleeve

143685647
362007-07SYMBP: RNCC: 3 | RNVC: 2
362007-07SYMB+: RNCC: 5 | RNVC: 2
M50R0UGEREPPLUS: RNCC: 5 | RNVC: 2
H085-6RGPLUS: RNCC: 5 | RNVC: 9

20 Feb 1981

5975-14-320-6727
Junction Box Cover

143206727
1648A15: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-457-8583
Access Cover

144578583
T390AB26: RNCC: 3 | RNVC: 2
5046363: RNCC: 5 | RNVC: 9
T390AB26: RNCC: 5 | RNVC: 9

24 Sep 1992

5975-14-401-3047
Access Cover

144013047
BA13741: RNCC: 3 | RNVC: 2
229862: RNCC: 5 | RNVC: 2

5 Jun 1985

5975-14-384-7016
Cable Marker Sleeve

143847016
16984914: RNCC: 3 | RNVC: 2

2 Jun 1983

5975-14-487-1198
Junction Box

144871198
024853: RNCC: 3 | RNVC: 2
24853: RNCC: 5 | RNVC: 2
3245060248536: RNCC: 5 | RNVC: 2

10 Apr 1997

5975-14-343-6793
Junction Box

143436793
195780: RNCC: 3 | RNVC: 2

13 Jul 1977

5975-14-342-4930
Metallic Raceway

143424930
4770001630: RNCC: 3 | RNVC: 2

16 May 1977

5975-14-435-3646
Junction Box

144353646
XAPA2100: RNCC: 3 | RNVC: 2
3389110313161: RNCC: 5 | RNVC: 2
SYB4031: RNCC: 5 | RNVC: 2
071241000000039: RNCC: 5 | RNVC: 2
XAPA2100: RNCC: 5 | RNVC: 9
5546873: RNCC: 5 | RNVC: 9

8 Nov 1989

5975-14-536-3521
Nonmetallic Raceway

145363521
00325: RNCC: 3 | RNVC: 2
4370262: RNCC: 5 | RNVC: 2

29 Jul 2003

5975-14-402-1123
Cable Marker Sleeve

144021123
401634: RNCC: 3 | RNVC: 2
BGE401634: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-031-2789
Cable Marker Sleeve

140312789
BJM08284: RNCC: 3 | RNVC: 2

14 Jun 1980

5975-14-404-7224
Cable Marker Sleeve

144047224
20781447: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-382-5843
Cable Marker Sleeve

143825843
16774612: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-521-2133
Cable Marker Sleeve

145212133
TS166014: RNCC: 3 | RNVC: 2

12 Jul 2000

5975-14-465-8541
Cable Marker Sleeve

144658541
HOI30-4NR0: RNCC: 3 | RNVC: 2

14 Oct 1993

5975-14-349-6733
Junction Box

143496733
24D118SMI1PE424PE2: RNCC: 3 | RNVC: 2
24D118SMI1PE4-24PE2: RNCC: 3 | RNVC: 2

22 May 1978

5975-14-526-3637
Cable Marker Sleeve

145263637
620-848-709-0: RNCC: 3 | RNVC: 2

25 Jul 2001

5975-14-425-9014
Cable Marker Sleeve

144259014
BAZ10980: RNCC: 3 | RNVC: 2

28 Jul 1988

5975-27-019-6415
Nonmetallic Raceway

270196415
05001HK0252: RNCC: 2 | RNVC: 1
05001HK0252: RNCC: 5 | RNVC: 9

15 Nov 2003

5975-14-554-8366
Stuffing Tube

145548366
510200: RNCC: 3 | RNVC: 2

29 Aug 2007

5975-14-401-0113
Cable Marker Sleeve

144010113
03620050001U: RNCC: 3 | RNVC: 2
3597470048306: RNCC: 5 | RNVC: 2
362050-01REPU: RNCC: 5 | RNVC: 2
362050REPU: RNCC: 5 | RNVC: 2
M65BLANCREPU: RNCC: 5 | RNVC: 2

21 May 1985

5975-14-340-2460
Push Button

143402460
44507010: RNCC: 3 | RNVC: 2
J44: RNCC: 5 | RNVC: 2

14 Feb 1977

5975-14-513-9299
Cable Marker Sleeve

145139299
2702-391A543: RNCC: 3 | RNVC: 2

19 Apr 1999

5975-33-201-0792
Blank Panel

332010792
8AQ 08621 AAAA: RNCC: 3 | RNVC: 2

29 Apr 2002

5975-33-201-4422
Interconnecting Box

332014422
220121330: RNCC: 3 | RNVC: 2

18 Jul 2002

5975-14-463-1708
Chassis Base

144631708
16380882: RNCC: 3 | RNVC: 2
16380882: RNCC: 5 | RNVC: 9

26 May 1993

5975-14-300-0784
Cable Marker Sleeve

143000784
4H002531-01: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-488-5169
Cable Hanger

144885169
ASNE071301: RNCC: 1 | RNVC: 2
E0713-01: RNCC: 3 | RNVC: 2
E0713-01: RNCC: 5 | RNVC: 2

14 May 1997

5975-14-384-6637
Cable Marker Sleeve

143846637
96080794: RNCC: 3 | RNVC: 2

2 Jun 1983

5975-14-444-6461
Blank Panel

144446461
90DD233301: RNCC: 3 | RNVC: 2

16 Jan 1991

5975-14-468-3955
Cable Collar

144683955
167232: RNCC: 3 | RNVC: 2
89169015: RNCC: 5 | RNVC: 2

23 Feb 1994

5975-15-158-0246
Cable Marker Sleeve

151580246
47915A139260: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-270-9362
Guy

142709362
42208: RNCC: 3 | RNVC: 2

1 Jan 1970

5975-27-016-9396
Raceway Elbow

270169396
4T72-200AS: RNCC: 2 | RNVC: 1
4T72-200AS: RNCC: 2 | RNVC: 1

15 Apr 2003

5975-14-517-7332
Cable Marker Sleeve

145177332
320-317-101-0: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-14-384-3630
Push Button

143843630
BMC1-1-069N: RNCC: 3 | RNVC: 9

4 May 1983

5975-14-391-2128
Stuffing Tube

143912128
C3426-034: RNCC: 3 | RNVC: 2

1 Mar 1984

5975-27-016-9398
Metallic Raceway

270169398
4T82-100AS: RNCC: 2 | RNVC: 1
4T82-100AS: RNCC: 2 | RNVC: 1
100X50MM T BAGLANTI: RNCC: 2 | RNVC: 1
100X50MM T BAGLANTI: RNCC: 5 | RNVC: 2

15 Apr 2003

5975-14-250-7039
Ground Rod

142507039
21143-09: RNCC: 3 | RNVC: 2

1 Jan 1968

5975-14-331-0822
Push Button

143310822
LUF44F3550-17827AV3: RNCC: 3 | RNVC: 2
17827AV3: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-14-480-4723
Ground Rod

144804723
TP-1610: RNCC: 3 | RNVC: 2
TP1610: RNCC: 5 | RNVC: 2

14 Mar 1996

5975-14-340-8240
Stuffing Tube

143408240
530400: RNCC: 3 | RNVC: 2
1404530400: RNCC: 5 | RNVC: 2
53040: RNCC: 5 | RNVC: 2
BS4: RNCC: 5 | RNVC: 2
823C66PS4L0NGUE: RNCC: 5 | RNVC: 9

14 Feb 1977

5975-14-334-3038
Blank Panel

143343038
20553: RNCC: 3 | RNVC: 2

23 Apr 1976

5975-14-356-9179
Cable Marker Sleeve

143569179
03600103015R: RNCC: 3 | RNVC: 2
V16REPR: RNCC: 5 | RNVC: 2
3597470036150: RNCC: 5 | RNVC: 2
360103REPR: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-539-3569
Metallic Raceway

145393569
AL100065: RNCC: 3 | RNVC: 2

7 Jan 2004

5975-14-367-4278
Cable Marker Sleeve

143674278
15176941: RNCC: 3 | RNVC: 2
15176941: RNCC: 5 | RNVC: 2
15176941: RNCC: 5 | RNVC: 9

11 Dec 1980

5975-14-394-5690
Junction Box

143945690
263E64346111000014: RNCC: 3 | RNVC: 2

28 Aug 1984

5975-15-200-5928
Raceway Elbow

152005928
780010: RNCC: 3 | RNVC: 2
(241)AD751780010: RNCC: 5 | RNVC: 2

1 Feb 2006

5975-14-331-4024
Junction Box

143314024
1366333: RNCC: 3 | RNVC: 2
K463HB3: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-15-158-0470
Cable Marker Sleeve

151580470
T0004162: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-356-9311
Cable Marker Sleeve

143569311
03600107015F: RNCC: 3 | RNVC: 2
3597470037751: RNCC: 5 | RNVC: 2
360107REPF: RNCC: 5 | RNVC: 2
V40REPF: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-402-1128
Cable Marker Sleeve

144021128
401646: RNCC: 3 | RNVC: 2
BGE401646: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-33-205-0587
Stuffing Tube

332050587
1000.32: RNCC: 3 | RNVC: 2

19 Apr 2006

5975-15-122-1152
Blank Panel

151221152
178-0111/00: RNCC: 3 | RNVC: 2

10 May 1996

5975-14-539-6523
Ground Rod

145396523
21231775-00: RNCC: 3 | RNVC: 2
21231775-9: RNCC: 5 | RNVC: 2

28 Jan 2004

5975-14-479-1552
Cable Marker Sleeve

144791552
03520015004L: RNCC: 3 | RNVC: 2
3597470261453: RNCC: 5 | RNVC: 2
HELAVIATWIN4SYMBL: RNCC: 5 | RNVC: 2
352015REPL: RNCC: 5 | RNVC: 2
352-015-L: RNCC: 5 | RNVC: 2

18 Dec 1995

5975-14-541-9872
Interior Cable Rack

145419872
20026-829: RNCC: 3 | RNVC: 2
502106008001A: RNCC: 3 | RNVC: 9

2 Jul 2004

5975-14-433-1469
Cable Marker Sleeve

144331469
ST400S58P202-057: RNCC: 3 | RNVC: 2
2-057: RNCC: 5 | RNVC: 2

11 Jul 1989

5975-14-402-1071
Cable Marker Sleeve

144021071
401580: RNCC: 3 | RNVC: 2
BGE401580: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-495-2678
Interconnecting Box

144952678
8705-40: RNCC: 3 | RNVC: 2
8705-40: RNCC: 5 | RNVC: 9
F300 0T 018 9096: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-487-0726
Junction Box

144870726
48316011: RNCC: 3 | RNVC: 2
7511-183-16011: RNCC: 5 | RNVC: 9

2 Apr 1997

5975-14-373-8532
Interior Cable Rack

143738532
BRT0108-75: RNCC: 3 | RNVC: 2
BRT0108-75: RNCC: 5 | RNVC: 2
BRD108-75: RNCC: 5 | RNVC: 2

13 Nov 1981

5975-14-405-1021
Cable Marker Sleeve

144051021
362007-01REPP: RNCC: 3 | RNVC: 2
M50BLANCREPP: RNCC: 5 | RNVC: 2

20 Nov 1985

5975-14-439-8627
Switch Box Case

144398627
A11Z1-0000: RNCC: 3 | RNVC: 2

29 May 1990

5975-14-466-3066
Stuffing Tube

144663066
T2588-20: RNCC: 3 | RNVC: 2
8930009621: RNCC: 5 | RNVC: 2

3 Nov 1993

5975-14-552-9370
Metallic Raceway

145529370
365P61-6109-0001: RNCC: 3 | RNVC: 2

14 Feb 2007

5975-33-144-5656
Junction Box

331445656
CER-29/160: RNCC: 3 | RNVC: 2

5 Oct 1995

5975-14-485-2313
Interior Cable Rack

144852313
421353: RNCC: 3 | RNVC: 2
421353: RNCC: 5 | RNVC: 2
421353: RNCC: 5 | RNVC: 2

13 Jan 1997

5975-14-287-0715
Cable Marker Sleeve

142870715
MGCM3BA10-11: RNCC: 3 | RNVC: 2
9554819110: RNCC: 5 | RNVC: 2
MGCM3BA10-11: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-268-0117
Stuffing Tube

142680117
823D66PS3C0URTE: RNCC: 2 | RNVC: 2
5975BA-PS3C: RNCC: 5 | RNVC: 2

1 Jan 1970

5975-15-153-3906
Blank Panel

151533906
5137-319-04: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-14-550-1985
Junction Box

145501985
5840-CP-0066: RNCC: 3 | RNVC: 2

8 Jun 2006

5975-14-496-9622
Cable Marker Sleeve

144969622
1064203: RNCC: 3 | RNVC: 2
1064203: RNCC: 5 | RNVC: 2
F300 0T 022 3290: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-33-107-4726
Interconnecting Box

331074726
W290683815200: RNCC: 3 | RNVC: 2

15 Nov 1999

5975-14-358-2231
Cable Marker Sleeve

143582231
SILAVIAA1BISF0058F1112320016: RNCC: 3 | RNVC: 2
F1112320016: RNCC: 5 | RNVC: 9

13 Aug 1979

5975-15-203-3572
Cable Marker Sleeve

152033572
PMD-0-9 STD-0-9: RNCC: 3 | RNVC: 2
(241)A3445PMD-0-9 STD-0-9: RNCC: 5 | RNVC: 2

14 Jan 2008

5975-14-466-3094
Stuffing Tube

144663094
1281T-4-20-58: RNCC: 3 | RNVC: 2
1281T4-20-58: RNCC: 5 | RNVC: 2
1281T-4-20: RNCC: 5 | RNVC: 2

3 Nov 1993

5975-14-471-4724
Cable Marker Sleeve

144714724
036200080011: RNCC: 3 | RNVC: 2
3597470047255: RNCC: 5 | RNVC: 2
362008REP1: RNCC: 5 | RNVC: 2
T286-464: RNCC: 5 | RNVC: 2

31 Aug 1994

5975-14-484-9009
Interconnecting Box

144849009
189307-166R: RNCC: 3 | RNVC: 9

12 Dec 1996

5975-14-353-9945
Cable Marker Sleeve

143539945
0294701070: RNCC: 3 | RNVC: 2
302-301-001P: RNCC: 5 | RNVC: 2

16 Jan 1979

5975-14-368-5646
Cable Marker Sleeve

143685646
362007-02SYMBM: RNCC: 3 | RNVC: 2
M50BLEUREPM0INS: RNCC: 5 | RNVC: 2
362007-02SYMB-: RNCC: 5 | RNVC: 2
H085-6BUM0INS: RNCC: 5 | RNVC: 9

20 Feb 1981

5975-14-517-7350
Cable Marker Sleeve

145177350
320-314-801-0: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-14-409-5031
Junction Box

144095031
ST159-2BM871-2: RNCC: 3 | RNVC: 2
ST159-2M871-2: RNCC: 5 | RNVC: 2

28 May 1986

5975-14-294-2534
Runner

142942534
121A63-104-01-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-476-1392
Cable Marker Sleeve

144761392
HOI50-RO-G: RNCC: 3 | RNVC: 2
HOI50-G-ROSE: RNCC: 5 | RNVC: 2
HOI50-G: RNCC: 5 | RNVC: 2

24 May 1995

5975-14-405-0611
Push Button

144050611
83005: RNCC: 3 | RNVC: 2
830-05: RNCC: 5 | RNVC: 2
200-8674: RNCC: 5 | RNVC: 2
5312042: RNCC: 5 | RNVC: 9
LG83005: RNCC: 5 | RNVC: 9

20 Nov 1985

5975-14-394-1931
Interior Cable Rack

143941931
280011-23: RNCC: 3 | RNVC: 9

23 Jun 1984

5975-14-408-6024
Guy

144086024
DHV1540-12-5: RNCC: 3 | RNVC: 2

2 Apr 1986

5975-14-442-6763
Cable Marker Sleeve

144426763
620-867-053-0: RNCC: 3 | RNVC: 2

24 Oct 1990

5975-14-501-6305
Cable Marker Sleeve

145016305
H015-4R0C: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-14-310-4910
Indicator Panel

143104910
A10-63-227-32-0: RNCC: 3 | RNVC: 2
A10-63-227-32-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-420-7526
Cable Marker Sleeve

144207526
ST400S58P202-046: RNCC: 3 | RNVC: 2
2-046: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-485-6739
Blank Panel

144856739
A10A76-115-06-0: RNCC: 3 | RNVC: 2
A10A76-115-06-0: RNCC: 5 | RNVC: 2

6 Feb 1997

5975-15-197-9516
Cable Collar

151979516
RCK-AC-PN-200: RNCC: 3 | RNVC: 2
(241)A1412RCK-AC-PN-200: RNCC: 5 | RNVC: 2

7 Jun 2004

5975-14-431-3787
Stuffing Tube

144313787
62257: RNCC: 3 | RNVC: 2
62257: RNCC: 5 | RNVC: 2

12 Apr 1989

5975-14-423-9160
Nonmetallic Raceway

144239160
BA6-30015G: RNCC: 3 | RNVC: 2

5 May 1988

5975-14-401-0112
Cable Marker Sleeve

144010112
03620050001C: RNCC: 3 | RNVC: 2
M65BLANCREPC: RNCC: 5 | RNVC: 2
3597470048023: RNCC: 5 | RNVC: 2
362050-01REPC: RNCC: 5 | RNVC: 2
362050REPC: RNCC: 5 | RNVC: 2

21 May 1985

5975-14-341-9002
Metallic Raceway

143419002
M3E702-51: RNCC: 3 | RNVC: 2

14 Apr 1977

5975-14-499-4356
Cable Marker Sleeve

144994356
5600023-060247-000-0-11: RNCC: 3 | RNVC: 2
5600023-060247.000.0-11: RNCC: 5 | RNVC: 2
F300 0T 022 0894: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-452-7047
Fanning Strip

144527047
07158: RNCC: 3 | RNVC: 2
3303430071587: RNCC: 5 | RNVC: 2

15 Jan 1992

5975-15-009-0043
Blank Panel

150090043
330-0200/01: RNCC: 3 | RNVC: 2

29 Apr 1999

5975-14-394-1930
Interior Cable Rack

143941930
280002-03: RNCC: 3 | RNVC: 9

23 Jun 1984

5975-14-489-4508
Conduit Outlet

144894508
BOI-Q91949A00: RNCC: 3 | RNVC: 2
BOI-Q91949X0D: RNCC: 5 | RNVC: 2

23 Jul 1997

5975-14-541-4841
Cable Marker Sleeve

145414841
88179-2156: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-448-5940
Conduit Outlet

144485940
5233-495-600: RNCC: 3 | RNVC: 2
BJ-WA016: RNCC: 5 | RNVC: 2

3 Jul 1991

5975-27-019-4284
Cable Marker Sleeve

270194284
10091MN0036: RNCC: 2 | RNVC: 1

15 Nov 2003

5975-14-406-4166
Switch Box Case

144064166
N262-0605-70000: RNCC: 3 | RNVC: 2
N262 06 0570 000-00: RNCC: 5 | RNVC: 2
N262-06-0570-000-00: RNCC: 5 | RNVC: 2

8 Jan 1986

5975-14-438-4775
Cable Hanger

144384775
332A61-1336-60: RNCC: 3 | RNVC: 2

21 Mar 1990

5975-14-402-9266
Cable Marker Sleeve

144029266
TRSA1014E2-03: RNCC: 3 | RNVC: 9

25 Jul 1985

5975-14-543-7619
Junction Box

145437619
040216: RNCC: 3 | RNVC: 2

9 Dec 2004

5975-14-409-0358
Cable Marker Sleeve

144090358
P12-3-2JOA: RNCC: 3 | RNVC: 2
P12-3-2JORANR: RNCC: 5 | RNVC: 2
12450772-4: RNCC: 5 | RNVC: 2

16 Apr 1986

5975-14-401-0101
Conduit Outlet

144010101
02-82-001A: RNCC: 3 | RNVC: 2
71CD004A: RNCC: 6 | RNVC: 9

21 May 1985

5975-14-032-1703
Conduit Outlet

140321703
11-000-97FML: RNCC: 3 | RNVC: 2

21 Sep 1981

5975-14-306-0599
Rigid Metal Conduit

143060599
A10-63-800-20-2: RNCC: 3 | RNVC: 2
A10-63-800-20-2: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-420-7456
Cable Marker Sleeve

144207456
ST400S58P201-007: RNCC: 3 | RNVC: 2
1-007: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-384-3628
Push Button

143843628
BMC1-1-025N: RNCC: 3 | RNVC: 9

4 May 1983

5975-14-475-3210
Cable Marker Sleeve

144753210
HT100-35JORW043734: RNCC: 3 | RNVC: 2
HT100-35JOW043734: RNCC: 5 | RNVC: 2

29 Mar 1995

5975-14-501-9832
Junction Box

145019832
XAP-M2203H29: RNCC: 3 | RNVC: 2

19 Nov 1997

5975-14-501-6376
Cable Marker Sleeve

145016376
370102-04REP4: RNCC: 3 | RNVC: 2
91702221: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-14-389-7546
Indicator Panel

143897546
A10-63-227-20-0: RNCC: 3 | RNVC: 2
A10-63-227-20-0: RNCC: 5 | RNVC: 2
85-801-0633: RNCC: 6 | RNVC: 9

20 Dec 1983

5975-14-405-1031
Cable Marker Sleeve

144051031
362009-01SYMB0LEM: RNCC: 3 | RNVC: 2
362009-01SYMB-: RNCC: 5 | RNVC: 2
M16BLANCSYMB0LEM: RNCC: 5 | RNVC: 2

20 Nov 1985

5975-14-410-6792
Stuffing Tube

144106792
TA1602M2ARCTL10-43: RNCC: 3 | RNVC: 2
9020045015: RNCC: 5 | RNVC: 9

9 Jul 1986

5975-14-343-6482
Stuffing Tube

143436482
600904: RNCC: 3 | RNVC: 2
1009-4: RNCC: 5 | RNVC: 2
10094: RNCC: 5 | RNVC: 2
22094: RNCC: 5 | RNVC: 2
60094: RNCC: 5 | RNVC: 2
N0RMADIXSN: RNCC: 5 | RNVC: 2

13 Jul 1977

5975-14-434-1749
Cable Marker Sleeve

144341749
HTMS-3/8: RNCC: 3 | RNVC: 9
HTMS3/8-47MM: RNCC: 5 | RNVC: 9

11 Sep 1989

5975-14-391-6318
Cable Marker Sleeve

143916318
364003: RNCC: 3 | RNVC: 2

21 Mar 1984

5975-14-322-8871
Cable Marker Sleeve

143228871
0084052600: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-15-156-8901
Electrical Rosette

151568901
BFG20-D3: RNCC: 3 | RNVC: 2

10 Mar 2003

5975-15-179-9919
Cable Hanger

151799919
9000359: RNCC: 3 | RNVC: 2

16 Nov 2007

5975-14-392-0464
Nonmetallic Raceway

143920464
365A61-3523-03: RNCC: 3 | RNVC: 2

21 Mar 1984

5975-14-378-7618
Push Button

143787618
4915181-00-4: RNCC: 3 | RNVC: 2

11 Aug 1982

5975-14-419-9210
Cable Marker Sleeve

144199210
HT15-25BA11-029: RNCC: 3 | RNVC: 2
1-029: RNCC: 5 | RNVC: 2
1029: RNCC: 5 | RNVC: 9

10 Nov 1987

5975-14-420-7471
Cable Marker Sleeve

144207471
ST400S58P201-076: RNCC: 3 | RNVC: 2
1-076: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-27-056-4456
Stuffing Tube

270564456
OMBG-02: RNCC: 2 | RNVC: 2

28 Mar 2012

5975-14-437-4468
Interior Cable Rack

144374468
332A61-1222-00: RNCC: 3 | RNVC: 2

31 Jan 1990

5975-14-357-1607
Cable Marker Sleeve

143571607
0294701560: RNCC: 3 | RNVC: 2
302-302-002-0: RNCC: 5 | RNVC: 2
302-302-002P: RNCC: 5 | RNVC: 2
620-857-321-0: RNCC: 5 | RNVC: 2

7 Jun 1979

5975-14-472-3267
Guy

144723267
DHV19516-44: RNCC: 3 | RNVC: 2

19 Oct 1994

5975-14-523-1879
Interior Cable Rack

145231879
45711039/003: RNCC: 3 | RNVC: 2
45711039: RNCC: 5 | RNVC: 2

10 Jan 2001

5975-14-545-9726
Cable Marker Sleeve

145459726
037401400047: RNCC: 3 | RNVC: 2
037401400047: RNCC: 5 | RNVC: 2
6070-GT-0000106: RNCC: 5 | RNVC: 9

31 May 2005

5975-27-046-3227
Junction Box Cover

270463227
660-11565: RNCC: 2 | RNVC: 1

29 Jul 2009

5975-14-409-5000
Junction Box

144095000
ST159-2AM873-23: RNCC: 3 | RNVC: 2

28 May 1986

5975-14-452-3858
Cable Collar

144523858
51-60-17-3: RNCC: 3 | RNVC: 2

8 Jan 1992

5975-14-339-4408
Cable Marker Sleeve

143394408
620-844-157-0: RNCC: 3 | RNVC: 2
620-844-157-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-505-4650
Interconnecting Box

145054650
NO PRIMARY REF14-505-4650: RNCC: 3 | RNVC: 2
12242031: RNCC: 5 | RNVC: 2

18 Mar 1998

5975-14-466-3067
Stuffing Tube

144663067
T2587-16: RNCC: 3 | RNVC: 2
8930009622: RNCC: 5 | RNVC: 2

3 Nov 1993

5975-14-339-4441
Cable Marker Sleeve

143394441
SLP15-10J0RCNR: RNCC: 3 | RNVC: 2
620-849-028-0: RNCC: 5 | RNVC: 2
620-849-028-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-346-2136
Push Button

143462136
5702-1-224: RNCC: 3 | RNVC: 2

12 Dec 1977

5975-14-339-4465
Cable Marker Sleeve

143394465
620-849-055-0: RNCC: 3 | RNVC: 2
620-849-055-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-33-206-0596
Cable Marker Sleeve

332060596
MMN461-1-4: RNCC: 3 | RNVC: 2
2815-33-M22-7825: RNCC: 6 | RNVC: 9

17 Jul 2007

5975-14-339-4439
Cable Marker Sleeve

143394439
SLP15-10J0RANR: RNCC: 3 | RNVC: 2
620-849-026-0: RNCC: 5 | RNVC: 2
620-849-026-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-549-4177
Junction Box

145494177
21251256-00: RNCC: 3 | RNVC: 2
21251256-0: RNCC: 5 | RNVC: 2

31 Mar 2006

5975-14-453-5761
Cable Marker Sleeve

144535761
BAZ9440: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-456-0851
Cable Marker Sleeve

144560851
73J2F: RNCC: 3 | RNVC: 2

17 Jun 1992

5975-14-513-4644
Junction Box

145134644
03085: RNCC: 3 | RNVC: 2

17 Mar 1999

5975-14-312-0134
Ground Rod

143120134
001183228P: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-404-7292
Cable Marker Sleeve

144047292
39051428: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-383-9526
Cable Marker Sleeve

143839526
78-15CXZ5S30LAB109JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ5S30JLAB109: RNCC: 5 | RNVC: 2
78-15CXZ5S30LAB109J: RNCC: 5 | RNVC: 2

4 May 1983

5975-14-371-3235
Cable Marker Sleeve

143713235
362103-01REP0: RNCC: 3 | RNVC: 2
BBZ2222: RNCC: 5 | RNVC: 2
V16-01REP0: RNCC: 5 | RNVC: 2

5 Aug 1981

5975-14-287-0726
Cable Marker Sleeve

142870726
MGCM3BA10-26: RNCC: 3 | RNVC: 2
9554819260: RNCC: 5 | RNVC: 2
MGCM3BA10-26: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-287-0718
Cable Marker Sleeve

142870718
MGCM3BA10-17: RNCC: 3 | RNVC: 2
9554819170: RNCC: 5 | RNVC: 2
MGCM3BA10-17: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-545-9323
Cable Marker Sleeve

145459323
03740120004P: RNCC: 3 | RNVC: 2
03740120004P: RNCC: 5 | RNVC: 2
6070-GT-0000069: RNCC: 5 | RNVC: 9

30 May 2005

5975-14-466-0717
Cable Marker Sleeve

144660717
PR292-48302: RNCC: 3 | RNVC: 2

27 Oct 1993

5975-14-362-6089
Cable Marker Sleeve

143626089
360110REPM: RNCC: 3 | RNVC: 2
HOI85-4RO-M: RNCC: 3 | RNVC: 2
V65REPM: RNCC: 5 | RNVC: 2
HOI85M: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-416-7431
Cable Marker Sleeve

144167431
HT20-25BA12-019: RNCC: 3 | RNVC: 2
2-019: RNCC: 5 | RNVC: 2

25 Jun 1987

5975-14-355-6983
Junction Box

143556983
21100673: RNCC: 3 | RNVC: 2
21100673-2: RNCC: 5 | RNVC: 2

19 Mar 1979

5975-14-415-7231
Cable Marker Sleeve

144157231
SLP20-10J0R17NR: RNCC: 3 | RNVC: 2
620-867-017-0: RNCC: 5 | RNVC: 2

18 May 1987

5975-14-404-7210
Cable Marker Sleeve

144047210
20781433: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-404-7267
Cable Marker Sleeve

144047267
39049073: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-501-6329
Nonmetallic Raceway

145016329
50370: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-14-277-9972
Junction Box

142779972
D5748: RNCC: 3 | RNVC: 2
D5748: RNCC: 5 | RNVC: 9

1 Jan 1971

5975-14-320-7200
Anchor Strap

143207200
121S64-267-06-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-457-6876
Cable Collar

144576876
1-00403230: RNCC: 3 | RNVC: 2

15 Sep 1992

5975-14-512-2872
Ground Rod

145122872
DAV66586: RNCC: 3 | RNVC: 2

10 Feb 1999

5975-14-367-3298
Interior Cable Rack

143673298
ATL7515AG: RNCC: 3 | RNVC: 2
5200001: RNCC: 3 | RNVC: 2
ATL7515AG: RNCC: 5 | RNVC: 2

11 Dec 1980

5975-14-349-6587
Blank Panel

143496587
20019: RNCC: 3 | RNVC: 2

22 May 1978

5975-14-480-0105
Blank Panel

144800105
1976065: RNCC: 3 | RNVC: 2

21 Feb 1996

5975-14-228-2185
Guy

142282185
501320: RNCC: 3 | RNVC: 2
307890: RNCC: 5 | RNVC: 2
HB-43A: RNCC: 6 | RNVC: 9

1 Jan 1966

5975-14-402-8832
Pothead

144028832
99D2: RNCC: 3 | RNVC: 2
5970-A1-000-0014: RNCC: 6 | RNVC: 9

19 Jul 1985

5975-14-360-5314
Interior Cable Rack

143605314
429004: RNCC: 3 | RNVC: 2
429004: RNCC: 5 | RNVC: 2
D107-123GC: RNCC: 5 | RNVC: 2

23 Nov 1979

5975-14-310-4934
Indicator Panel

143104934
A10-63-227-62-0: RNCC: 3 | RNVC: 2
A10-63-227-62-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-505-0723
Cable Marker Sleeve

145050723
KIFV40X32X1 1-4: RNCC: 3 | RNVC: 2

11 Mar 1998

5975-14-513-8356
Interconnecting Box

145138356
0-142176-1: RNCC: 3 | RNVC: 2

14 Apr 1999

5975-14-551-3712
Cable Crosshead

145513712
PASSECABLESENIOR: RNCC: 3 | RNVC: 2

13 Sep 2006

5975-14-502-4586
Conduit Outlet

145024586
BOI-Q00508X00: RNCC: 3 | RNVC: 2

17 Dec 1997

5975-14-541-9875
Interior Cable Rack

145419875
20026-847: RNCC: 3 | RNVC: 2
502106008003A: RNCC: 3 | RNVC: 9

2 Jul 2004

5975-14-455-3995
Cable Marker Sleeve

144553995
0084102560: RNCC: 3 | RNVC: 2
89436164: RNCC: 5 | RNVC: 2

21 May 1992

5975-14-459-7287
Electrical Clamp

144597287
PE27017-9: RNCC: 3 | RNVC: 2

15 Dec 1992

5975-14-374-5391
Cable Marker Sleeve

143745391
P10-3-2VO7: RNCC: 3 | RNVC: 2
P10-7: RNCC: 5 | RNVC: 2
91284018: RNCC: 5 | RNVC: 2
0736-5: RNCC: 5 | RNVC: 9

30 Jan 1982

5975-14-339-4450
Cable Marker Sleeve

143394450
SLP15-10J0RLNR: RNCC: 3 | RNVC: 2
620-849-037-0: RNCC: 5 | RNVC: 2
620-849-037-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-27-038-9858
Cable Collar

270389858
901-SK-175: RNCC: 2 | RNVC: 1

7 Nov 2007

5975-14-352-7375
Interior Cable Rack

143527375
611102575: RNCC: 3 | RNVC: 2

14 Nov 1978

5975-14-549-4840
Ground Rod

145494840
61771689AA: RNCC: 3 | RNVC: 2

10 Apr 2006

5975-14-539-6595
Blank Panel

145396595
21236679-9: RNCC: 3 | RNVC: 2

28 Jan 2004

5975-14-386-4792
Cable Marker Sleeve

143864792
320-062-701-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5975-14-306-0564
Metallic Raceway

143060564
A10-63-347-01-0: RNCC: 3 | RNVC: 2
A10-63-347-01-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-501-8698
Junction Box

145018698
12D80: RNCC: 3 | RNVC: 2

17 Nov 1997

5975-14-442-6703
Cable Marker Sleeve

144426703
SLP20-10J0R4NR: RNCC: 3 | RNVC: 2

24 Oct 1990

5975-14-343-4824
Junction Box Cover

143434824
EA1M601-80-810N1: RNCC: 3 | RNVC: 2
EA1M601-80-810: RNCC: 5 | RNVC: 2

16 Jun 1977

5975-14-234-6271
Junction Box

142346271
BJ186A: RNCC: 3 | RNVC: 2
SP810: RNCC: 3 | RNVC: 2
91612928: RNCC: 5 | RNVC: 2
BJ186A: RNCC: 5 | RNVC: 9
SP810: RNCC: 5 | RNVC: 9
BJ-186A: RNCC: 6 | RNVC: 9

1 Jan 1967

5975-14-508-0096
Cable Marker Sleeve

145080096
025260-1023-03: RNCC: 3 | RNVC: 2
9398083077: RNCC: 5 | RNVC: 9

26 Aug 1998

5975-14-458-7947
Cable Marker Sleeve

144587947
HT10-50GI: RNCC: 3 | RNVC: 2

4 Nov 1992

5975-14-349-2414
Junction Box

143492414
NO PRIMARY REF14-349-2414: RNCC: 3 | RNVC: 2
4557: RNCC: 5 | RNVC: 9

22 May 1978

5975-14-342-0060
Interior Cable Rack

143420060
D108-4SZ100: RNCC: 3 | RNVC: 2
D108-4SZ100: RNCC: 5 | RNVC: 2
101031: RNCC: 5 | RNVC: 9
D108-4SZ100: RNCC: 5 | RNVC: 9

14 Apr 1977

5975-14-342-0068
Interior Cable Rack

143420068
VE90D108SZ195: RNCC: 3 | RNVC: 2
VE90D108SZ195: RNCC: 5 | RNVC: 2
102076: RNCC: 5 | RNVC: 9
VE90D108SZ195: RNCC: 5 | RNVC: 9

14 Apr 1977

5975-14-508-1345
Interior Cable Rack

145081345
10068225: RNCC: 3 | RNVC: 2

26 Aug 1998

5975-15-009-0037
Blank Panel

150090037
132-0214/08: RNCC: 3 | RNVC: 2

2 Jan 1980

5975-14-250-6969
Guy

142506969
734-1531: RNCC: 3 | RNVC: 2
HB-4A: RNCC: 6 | RNVC: 9

1 Jan 1968

5975-15-154-2687
Blank Panel

151542687
999-0500-85-137: RNCC: 3 | RNVC: 2

4 Apr 2001

5975-14-467-2098
Cable Collar

144672098
4-9A3M: RNCC: 3 | RNVC: 2
AE2243-3M: RNCC: 3 | RNVC: 2
3M: RNCC: 5 | RNVC: 9

21 Dec 1993

5975-14-509-2305
Cable Marker Sleeve

145092305
C9A-T18-6: RNCC: 3 | RNVC: 2
C9AT18-6: RNCC: 5 | RNVC: 9

21 Oct 1998

5975-14-306-7907
Stuffing Tube

143067907
70136028: RNCC: 3 | RNVC: 2
70136028: RNCC: 5 | RNVC: 2

5 Apr 2001

5975-14-436-4360
Stuffing Tube

144364360
Y9800977: RNCC: 3 | RNVC: 2
7535: RNCC: 5 | RNVC: 2
CPNH11C: RNCC: 5 | RNVC: 2
91628688: RNCC: 5 | RNVC: 2
5000787015: RNCC: 5 | RNVC: 2

3 Jan 1990

5975-14-453-7731
Interior Cable Rack

144537731
SR55 TYPE1-200: RNCC: 3 | RNVC: 2
SR55 TYPE1-200: RNCC: 5 | RNVC: 2

10 Mar 1992

5975-14-238-2247
Cable Marker Sleeve

142382247
352002REP6: RNCC: 3 | RNVC: 2
99022957: RNCC: 3 | RNVC: 2
352-02REP6: RNCC: 5 | RNVC: 2
99022957: RNCC: 5 | RNVC: 2
HELAVIATWIN1REP6: RNCC: 5 | RNVC: 2
RAR4632: RNCC: 5 | RNVC: 2
99022957: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-357-4852
Cable Marker Sleeve

143574852
353063-01REPR: RNCC: 3 | RNVC: 2
PLI02-10RBLANC: RNCC: 5 | RNVC: 2

7 Jun 1979

5975-14-470-9101
Cable Marker Sleeve

144709101
807070-03: RNCC: 3 | RNVC: 2

13 Jul 1994

5975-33-002-1231
Interconnecting Box

330021231
2590-000593: RNCC: 3 | RNVC: 2

8 Jun 1993

5975-15-119-0566
Cable Collar

151190566
70921229: RNCC: 3 | RNVC: 2

4 Jul 1994

5975-14-517-7319
Cable Marker Sleeve

145177319
320-318-401-0: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-14-476-1407
Cable Marker Sleeve

144761407
HOI50-4RO-S: RNCC: 3 | RNVC: 2
HOI50-RO-S: RNCC: 3 | RNVC: 2
HOI50-S: RNCC: 5 | RNVC: 2
HOI50-S-ROSE: RNCC: 5 | RNVC: 2
0617173: RNCC: 5 | RNVC: 2

24 May 1995

5975-14-383-4020
Junction Box Cover

143834020
387837: RNCC: 3 | RNVC: 2

11 Apr 1983

5975-14-420-7485
Cable Marker Sleeve

144207485
ST400S58P201-169: RNCC: 3 | RNVC: 2
1-169: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-490-5560
Junction Box

144905560
J05085-05-0100: RNCC: 3 | RNVC: 2

2 Oct 1997

5975-14-329-3571
Junction Box

143293571
22BFP1-4-1-5-1-6NUE: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-279-6857
Rigid Metal Conduit

142796857
NO PRIMARY REF14-279-6857: RNCC: 3 | RNVC: 2
201-0003-1: RNCC: 5 | RNVC: 9

1 Jan 1971

5975-14-545-8976
Cable Marker Sleeve

145458976
03740180004Z: RNCC: 3 | RNVC: 2
03740180004Z: RNCC: 5 | RNVC: 2
6070-GT-0000024: RNCC: 5 | RNVC: 9

25 May 2005

5975-14-362-6062
Cable Marker Sleeve

143626062
03600102015L: RNCC: 3 | RNVC: 2
V11REPL: RNCC: 5 | RNVC: 2
3597470035634: RNCC: 5 | RNVC: 2
360102REPL: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-461-2460
Junction Box

144612460
46041132: RNCC: 3 | RNVC: 2

3 Mar 1993

5975-14-042-6783
Junction Box

140426783
24DMLN: RNCC: 3 | RNVC: 2

21 Jan 1993

5975-14-551-7794
Junction Box

145517794
PVBEN257: RNCC: 3 | RNVC: 2

23 Oct 2006

5975-27-021-7070
Raceway Elbow

270217070
400 40: RNCC: 2 | RNVC: 1
400 40: RNCC: 5 | RNVC: 2

16 Feb 2004

5975-15-153-3890
Blank Panel

151533890
5137-314-02: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-33-106-8134
Interconnecting Box

331068134
RE-50-11-6: RNCC: 3 | RNVC: 2

31 Mar 1999

5975-14-353-9938
Cable Marker Sleeve

143539938
0294700720: RNCC: 3 | RNVC: 2
620-857-287-0: RNCC: 5 | RNVC: 2
302-300-301-0: RNCC: 5 | RNVC: 2
302-300-301P: RNCC: 5 | RNVC: 2

16 Jan 1979

5975-15-111-3084
Blank Panel

151113084
393-0100/00: RNCC: 3 | RNVC: 2

16 Nov 1990

5975-14-339-4433
Cable Marker Sleeve

143394433
SLP15-10J0R13NR: RNCC: 3 | RNVC: 2
620-849-013-0: RNCC: 5 | RNVC: 2
620-849-013-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-431-5965
Cable Marker Sleeve

144315965
364-002-1-4: RNCC: 3 | RNVC: 2

26 Apr 1989

5975-14-254-1120
Cable Marker Sleeve

142541120
352002REPF: RNCC: 3 | RNVC: 2
HELAVIATWIN1REPF: RNCC: 5 | RNVC: 2
99042433: RNCC: 5 | RNVC: 2
99042433: RNCC: 5 | RNVC: 9
99042433: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-549-5421
Cable Marker Sleeve

145495421
351A027: RNCC: 3 | RNVC: 2

13 Apr 2006

5975-14-544-0846
Cable Collar

145440846
440202053: RNCC: 3 | RNVC: 2

3 Jan 2005

5975-14-401-5070
Junction Box

144015070
17100: RNCC: 3 | RNVC: 2

5 Jun 1985

5975-14-382-5838
Cable Marker Sleeve

143825838
16899684: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-467-2932
Nonmetallic Raceway

144672932
P28290AA: RNCC: 3 | RNVC: 2
P28290AA: RNCC: 5 | RNVC: 9

4 Jan 1994

5975-14-506-8135
Nonmetallic Raceway

145068135
30050: RNCC: 3 | RNVC: 2

20 May 1998

5975-14-542-3418
Interconnecting Box

145423418
58866: RNCC: 3 | RNVC: 2

8 Jul 2004

5975-14-453-5774
Cable Marker Sleeve

144535774
BAZ9454: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-282-5766
Cable Collar

142825766
202600: RNCC: 3 | RNVC: 2

1 Jan 1971

5975-14-349-6732
Junction Box

143496732
18D93SMI1PE3-18PE2: RNCC: 3 | RNVC: 2

22 May 1978

5975-14-526-5021
Cable Marker Sleeve

145265021
D65377-3: RNCC: 3 | RNVC: 2

1 Aug 2001

5975-15-138-0312
Cable Collar

151380312
90-5997-19: RNCC: 3 | RNVC: 2

10 Oct 1996

5975-14-416-7236
Cable Marker Sleeve

144167236
HT15-25BA11-060: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-437-4483
Cable Hanger

144374483
332A61-1250-66: RNCC: 3 | RNVC: 2

31 Jan 1990

5975-14-485-1077
Raceway Cover

144851077
421569-2: RNCC: 3 | RNVC: 2
421889: RNCC: 3 | RNVC: 2
421569: RNCC: 5 | RNVC: 2
421889: RNCC: 5 | RNVC: 2
421569: RNCC: 5 | RNVC: 2

8 Jan 1997

5975-14-452-2216
Stuffing Tube

144522216
ZK90S4REPERE7: RNCC: 3 | RNVC: 2

7 Jan 1992

5975-14-378-7300
Cable Collar

143787300
86651-2: RNCC: 3 | RNVC: 2

11 Aug 1982

5975-14-539-5889
Blank Panel

145395889
61230957AA: RNCC: 3 | RNVC: 2

22 Jan 2004

5975-14-504-1097
Cable Marker Sleeve

145041097
39256610: RNCC: 3 | RNVC: 2

6 Feb 1998

5975-14-316-8198
Stuffing Tube

143168198
27830DET26: RNCC: 3 | RNVC: 2
27830DET26: RNCC: 5 | RNVC: 9

1 Jan 1975

5975-14-281-1714
Junction Box Cover

142811714
309107: RNCC: 3 | RNVC: 2

1 Jan 1971

5975-14-372-8223
Cable Marker Sleeve

143728223
0294701740: RNCC: 3 | RNVC: 2

21 Sep 1981

5975-14-356-9243
Cable Marker Sleeve

143569243
03600105015J: RNCC: 3 | RNVC: 2
3597470036938: RNCC: 5 | RNVC: 2
360105REPJ: RNCC: 5 | RNVC: 2
V27REPJ: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-356-9275
Cable Marker Sleeve

143569275
03600106015F: RNCC: 3 | RNVC: 2
V37REPF: RNCC: 5 | RNVC: 2
3597470037317: RNCC: 5 | RNVC: 2
360106REPF: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-447-7288
Stuffing Tube

144477288
152009: RNCC: 3 | RNVC: 2
1010-152009: RNCC: 5 | RNVC: 2

29 May 1991

5975-14-330-6678
Cable Marker Sleeve

143306678
120873A: RNCC: 3 | RNVC: 2
120873: RNCC: 5 | RNVC: 9
85-688-3866: RNCC: 6 | RNVC: 9

2 Jul 1975

5975-14-238-2696
Cable Marker Sleeve

142382696
035200030047: RNCC: 3 | RNVC: 2
352-03REP7: RNCC: 5 | RNVC: 2
99001660: RNCC: 5 | RNVC: 2
352003REP7: RNCC: 5 | RNVC: 2
352003REP7: RNCC: 5 | RNVC: 2
99001660: RNCC: 5 | RNVC: 2
HELAVIATWIN2REP7: RNCC: 5 | RNVC: 2
99001660: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-238-2702
Cable Marker Sleeve

142382702
035200030048: RNCC: 3 | RNVC: 2
99001661: RNCC: 5 | RNVC: 2
HELAVIATWIN2REP8: RNCC: 5 | RNVC: 2
352-03REP8: RNCC: 5 | RNVC: 2
352003REP8: RNCC: 5 | RNVC: 2
99001661: RNCC: 5 | RNVC: 2
99001661: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-517-7359
Cable Marker Sleeve

145177359
320-316-201-0: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-14-453-4018
Cable Marker Sleeve

144534018
C58684: RNCC: 3 | RNVC: 2
C58684: RNCC: 5 | RNVC: 2

19 Feb 1992

5975-14-453-5740
Cable Marker Sleeve

144535740
BAZ9677: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-252-9149
Guy

142529149
2060CFVP3A: RNCC: 3 | RNVC: 2
MAHJ55-121-3: RNCC: 5 | RNVC: 2

1 Jan 1968

5975-14-264-4188
Interior Cable Rack

142644188
HB1-220: RNCC: 3 | RNVC: 2

1 Jan 1970

5975-14-505-5050
Interconnecting Box

145055050
8XS113389-001: RNCC: 3 | RNVC: 2
HEL8XS113389-001: RNCC: 5 | RNVC: 9

18 Mar 1998

5975-15-153-3879
Blank Panel

151533879
5137-308-04: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-15-153-3923
Blank Panel

151533923
5137-323-04: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-14-548-7107
Interconnecting Box

145487107
3T3659CA: RNCC: 3 | RNVC: 2

1 Feb 2006

5975-15-002-1499
Cable Hanger

150021499
5801340841: RNCC: 3 | RNVC: 2

24 Jul 2013

5975-14-356-9255
Cable Marker Sleeve

143569255
03600105015V: RNCC: 3 | RNVC: 2
3597470037119: RNCC: 5 | RNVC: 2
360105REPV: RNCC: 5 | RNVC: 2
V27REPV: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-400-7252
Fanning Strip

144007252
8675-42030: RNCC: 3 | RNVC: 2
8675-42030: RNCC: 5 | RNVC: 2
867542030: RNCC: 5 | RNVC: 2

14 May 1985

5975-27-005-4977
Rod End Clevis

270054977
8MMPLASTIK: RNCC: 3 | RNVC: 2

8 Jan 1998

5975-15-000-9249
Raceway Elbow

150009249
02497: RNCC: 3 | RNVC: 2

29 Apr 2013

5975-14-460-4134
Cable Hanger

144604134
LN400010F4REPC1: RNCC: 3 | RNVC: 2
RAB0379: RNCC: 5 | RNVC: 2

25 Jan 1993

5975-27-019-4273
Cable Marker Sleeve

270194273
10091MN0011: RNCC: 2 | RNVC: 1

15 Nov 2003

5975-27-056-5720
Cable Marker Sleeve

270565720
517004: RNCC: 5 | RNVC: 9

11 Apr 2012

5975-14-375-1101
Stuffing Tube

143751101
121300: RNCC: 3 | RNVC: 2
1003-121300: RNCC: 5 | RNVC: 9
12130: RNCC: 5 | RNVC: 9

30 Jan 1982

5975-14-324-4497
Rigid Metal Conduit

143244497
121E63-415-27-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-15-153-3978
Blank Panel

151533978
5137-407-10: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-14-425-4635
Cable Marker Sleeve

144254635
20130270: RNCC: 3 | RNVC: 2
20130270: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-14-469-3695
Interconnecting Box

144693695
406130: RNCC: 3 | RNVC: 2
406130: RNCC: 5 | RNVC: 9

20 Apr 1994

5975-14-453-5801
Cable Marker Sleeve

144535801
BAZ11719: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-503-2254
Interconnecting Box

145032254
20359930: RNCC: 3 | RNVC: 2

7 Jan 1998

5975-14-372-0462
Interconnecting Box

143720462
0819P002002: RNCC: 3 | RNVC: 2

1 Sep 1981

5975-14-479-3005
Cable Marker Sleeve

144793005
0084105000: RNCC: 3 | RNVC: 2

9 Jan 1996

5975-14-541-7394
Interconnecting Box

145417394
1498107: RNCC: 3 | RNVC: 2

26 Jun 2004

5975-14-525-9559
Cable Crosshead

145259559
AL1263F00: RNCC: 3 | RNVC: 2

20 Jun 2001

5975-14-509-2550
Cable Marker Sleeve

145092550
0084054500: RNCC: 3 | RNVC: 2

21 Oct 1998

5975-14-328-9397
Junction Box

143289397
04425: RNCC: 3 | RNVC: 2
4425: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-339-4414
Cable Marker Sleeve

143394414
620-844-165-0: RNCC: 3 | RNVC: 2
620-844-165-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-356-9181
Cable Marker Sleeve

143569181
03600103015T: RNCC: 3 | RNVC: 2
3597470036198: RNCC: 5 | RNVC: 2
360103REPT: RNCC: 5 | RNVC: 2
V16REPT: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-501-0491
Stuffing Tube

145010491
F6091002: RNCC: 3 | RNVC: 2
91619466: RNCC: 3 | RNVC: 2
F300 0T 025 0794: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-500-3652
Metallic Raceway

145003652
D61501600000: RNCC: 3 | RNVC: 2
F300 0T 024 3752: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-383-0035
Nonmetallic Raceway

143830035
4770202560: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-410-2680
Push Button

144102680
29006016: RNCC: 3 | RNVC: 2

18 Jun 1986

5975-14-453-5722
Cable Marker Sleeve

144535722
BAZ9658: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-489-1892
Blank Panel

144891892
31139001: RNCC: 3 | RNVC: 2

2 Jul 1997

5975-14-524-0275
Cable Marker Sleeve

145240275
2424-27: RNCC: 3 | RNVC: 2

22 Feb 2001

5975-14-479-9313
Cable Marker Sleeve

144799313
TMS-3/8NR11U9: RNCC: 3 | RNVC: 9
TMS3-8NR11U9: RNCC: 5 | RNVC: 9

14 Feb 1996

5975-14-454-4726
Insulator Pin

144544726
10075793: RNCC: 3 | RNVC: 2

2 Apr 1992

5975-14-403-0562
Cable Marker Sleeve

144030562
38206835: RNCC: 3 | RNVC: 2

25 Jul 1985

5975-14-268-0095
Stuffing Tube

142680095
823D66CV8: RNCC: 2 | RNVC: 2
5975BA-CV8: RNCC: 5 | RNVC: 2

1 Jan 1970

5975-14-449-5763
Cable Marker Sleeve

144495763
03640002004P: RNCC: 3 | RNVC: 2
3597470050361: RNCC: 5 | RNVC: 2
364002REPP: RNCC: 5 | RNVC: 2

27 Aug 1991

5975-15-102-2714
Junction Box Cover

151022714
1455-31-206: RNCC: 3 | RNVC: 2
01-261-31-206: RNCC: 5 | RNVC: 2

27 Oct 1987

Load More Results