What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 122 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 122of 491

5975-14-545-9046
Cable Marker Sleeve

145459046
03740150004H: RNCC: 3 | RNVC: 2
03740150004H: RNCC: 5 | RNVC: 2
6070-GT-0000033: RNCC: 5 | RNVC: 9

26 May 2005

5975-14-405-1041
Cable Marker Sleeve

144051041
036200090010: RNCC: 3 | RNVC: 2
T286-423: RNCC: 5 | RNVC: 2
3597470047804: RNCC: 5 | RNVC: 2
362009-10REP0: RNCC: 5 | RNVC: 2
362009REP0: RNCC: 5 | RNVC: 2
M16N0IRREP0: RNCC: 5 | RNVC: 2

20 Nov 1985

5975-14-513-9203
Cable Marker Sleeve

145139203
0702-004A656: RNCC: 3 | RNVC: 2

19 Apr 1999

5975-14-504-9399
Conduit Outlet

145049399
BOI-Q02143B00: RNCC: 3 | RNVC: 2
BOI-Q02143X00: RNCC: 5 | RNVC: 9

11 Mar 1998

5975-14-209-5246
Cable Collar

142095246
NO PRIMARY REF14-209-5246: RNCC: 3 | RNVC: 2
23197: RNCC: 5 | RNVC: 9

1 Jan 1964

5975-14-508-7780
Conduit Outlet

145087780
BS2842.120.00.000: RNCC: 3 | RNVC: 2
BS2842-120-00-000: RNCC: 5 | RNVC: 9

30 Sep 1998

5975-14-520-6072
Junction Box

145206072
45460122: RNCC: 3 | RNVC: 2

24 May 2000

5975-14-445-6294
Cable Marker Sleeve

144456294
H090-6VR5: RNCC: 3 | RNVC: 2
5045038: RNCC: 5 | RNVC: 9

20 Feb 1991

5975-14-410-6793
Stuffing Tube

144106793
TA1602M2ARCTL10-46: RNCC: 3 | RNVC: 2
9020045016: RNCC: 5 | RNVC: 9

9 Jul 1986

5975-14-451-8679
Stuffing Tube

144518679
PR4712-DN20PN20-REP7: RNCC: 3 | RNVC: 2

10 Dec 1991

5975-14-317-0525
Rigid Metal Conduit

143170525
160-79221-01A: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-548-2449
Stuffing Tube

145482449
A1100-07-96-065: RNCC: 3 | RNVC: 2

15 Dec 2005

5975-14-526-9786
Interconnecting Box

145269786
J06040-06-1400: RNCC: 3 | RNVC: 2

19 Sep 2001

5975-33-200-6943
Interconnecting Box

332006943
PCMMI0054: RNCC: 3 | RNVC: 2
SPI-1302: RNCC: 5 | RNVC: 1

26 Feb 2002

5975-14-470-9108
Cable Marker Sleeve

144709108
735080-01REP4: RNCC: 3 | RNVC: 2
782116001843: RNCC: 5 | RNVC: 2
782116001843: RNCC: 5 | RNVC: 9

13 Jul 1994

5975-33-144-5653
Junction Box Cover

331445653
CE-21/100 NORMAL: RNCC: 3 | RNVC: 2

20 Sep 1995

5975-14-330-3995
Junction Box Cover

143303995
E030-200-000: RNCC: 3 | RNVC: 2
E030-200: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-478-7057
Junction Box

144787057
MAT573-0066F5: RNCC: 3 | RNVC: 2

20 Nov 1995

5975-14-469-7889
Interconnecting Box

144697889
45-0426: RNCC: 3 | RNVC: 2

10 May 1994

5975-14-310-6358
Cable Marker Sleeve

143106358
H50-35JOK212: RNCC: 3 | RNVC: 2
H50-35J0K212: RNCC: 5 | RNVC: 2
N50-35JAUNEK212: RNCC: 5 | RNVC: 2
N50-35JOK212: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-27-013-5068
Junction Box

270135068
3440-726-2600: RNCC: 2 | RNVC: 1
3440-726-2600: RNCC: 2 | RNVC: 1
3440-726-0000: RNCC: 5 | RNVC: 9

24 Jun 2002

5975-14-510-2562
Cable Marker Sleeve

145102562
TMS1-8NR11: RNCC: 3 | RNVC: 9
5970AA8017627: RNCC: 6 | RNVC: 9

4 Nov 1998

5975-27-052-0940
Stuffing Tube

270520940
ORTA-PG/11: RNCC: 2 | RNVC: 1

17 Dec 2010

5975-14-526-5539
Cable Marker Sleeve

145265539
0353-0041-001REPC: RNCC: 3 | RNVC: 2

1 Aug 2001

5975-14-433-2513
Cable Marker Sleeve

144332513
244775: RNCC: 3 | RNVC: 2

18 Jul 1989

5975-15-119-1027
Cable Collar

151191027
70931683: RNCC: 3 | RNVC: 2

4 Jul 1994

5975-14-543-5839
Cable Hanger

145435839
T533A1124141: RNCC: 3 | RNVC: 2

24 Nov 2004

5975-15-102-1461
Junction Box Cover

151021461
8259.00.01: RNCC: 3 | RNVC: 2

1 Jan 1994

5975-14-256-6460
Guy

142566460
MARJ140: RNCC: 3 | RNVC: 2
GC1229: RNCC: 5 | RNVC: 2
207-3: RNCC: 5 | RNVC: 2

1 Jan 1969

5975-14-312-9114
Cable Marker Sleeve

143129114
9742-149: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-422-0808
Metallic Raceway

144220808
AM1DP200: RNCC: 3 | RNVC: 2
017322005: RNCC: 3 | RNVC: 9
3389110567311: RNCC: 5 | RNVC: 2
AM1-DP200: RNCC: 5 | RNVC: 2
072837000000013: RNCC: 5 | RNVC: 2
17322005: RNCC: 5 | RNVC: 2
PR30: RNCC: 5 | RNVC: 2
5547414: RNCC: 5 | RNVC: 9
AM1DP200: RNCC: 5 | RNVC: 9

22 Feb 1988

5975-14-389-4999
Junction Box

143894999
365A67-5033-01: RNCC: 3 | RNVC: 2

20 Dec 1983

5975-33-200-7519
Stuffing Tube

332007519
7562.472.0004: RNCC: 3 | RNVC: 2
4720000592: RNCC: 5 | RNVC: 2

6 Mar 2002

5975-14-355-6646
Conduit Outlet

143556646
DPD03: RNCC: 3 | RNVC: 2

19 Mar 1979

5975-14-360-5596
Cable Marker Sleeve

143605596
16892012: RNCC: 3 | RNVC: 2
16892012: RNCC: 5 | RNVC: 9

23 Nov 1979

5975-14-299-1692
Junction Box

142991692
121S63-441-00-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-311-3555
Cable Marker Sleeve

143113555
H100-35J0K223: RNCC: 3 | RNVC: 2
N95-35JAUNEK223: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-254-1080
Cable Marker Sleeve

142541080
352004REP7: RNCC: 3 | RNVC: 2
99008784: RNCC: 3 | RNVC: 2
99008784: RNCC: 5 | RNVC: 2
352-04REP7: RNCC: 5 | RNVC: 2
HELAVIATWIN3REP7: RNCC: 5 | RNVC: 2
RAR4644: RNCC: 5 | RNVC: 2
99008784: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-545-7490
Guide Rail

145457490
214378: RNCC: 3 | RNVC: 2

9 May 2005

5975-14-309-6699
Access Cover

143096699
121S63-238-50-0: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-33-206-3146
Raceway Elbow

332063146
78223-2: RNCC: 3 | RNVC: 2

5 Nov 2007

5975-14-345-2254
Junction Box Cover

143452254
FF1E661-10820: RNCC: 3 | RNVC: 2

5 Oct 1977

5975-14-377-4140
Junction Box

143774140
321A60-3152-00: RNCC: 3 | RNVC: 2
85-691-6951: RNCC: 6 | RNVC: 9

17 May 1982

5975-14-401-2889
Junction Box Cover

144012889
221763: RNCC: 3 | RNVC: 2

5 Jun 1985

5975-14-309-6685
Access Cover

143096685
121E63-236-50-0: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-437-4152
Blank Panel

144374152
3001964: RNCC: 3 | RNVC: 2

31 Jan 1990

5975-14-453-5733
Cable Marker Sleeve

144535733
BAZ9670: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-469-9645
Cable Marker Sleeve

144699645
213825-01: RNCC: 3 | RNVC: 2

18 May 1994

5975-27-006-6461
Ground Rod

270066461
CUBUK-200: RNCC: 2 | RNVC: 1

2 Feb 1999

5975-14-321-7929
Junction Box

143217929
263-24000: RNCC: 3 | RNVC: 2
BJ148A: RNCC: 5 | RNVC: 2
BJ-148A: RNCC: 6 | RNVC: 9

1 Jan 1975

5975-14-342-1366
Cable Marker Sleeve

143421366
S272236-2: RNCC: 3 | RNVC: 2
85-680-9661: RNCC: 6 | RNVC: 9

14 Apr 1977

5975-14-374-5387
Cable Marker Sleeve

143745387
P10-3-20R3: RNCC: 3 | RNVC: 2
P10-3: RNCC: 5 | RNVC: 2
P100R3: RNCC: 5 | RNVC: 2
91284014: RNCC: 5 | RNVC: 2

30 Jan 1982

5975-14-431-6155
Cable Marker Sleeve

144316155
P20-4-8J04: RNCC: 3 | RNVC: 2
P20J04: RNCC: 5 | RNVC: 2

26 Apr 1989

5975-14-419-7234
Cable Marker Sleeve

144197234
H015-6RG1: RNCC: 3 | RNVC: 2

5 Nov 1987

5975-33-103-5038
Conduit Outlet

331035038
5092: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-14-238-2684
Cable Marker Sleeve

142382684
035200050040: RNCC: 3 | RNVC: 2
HELAVIATWIN4REP0: RNCC: 5 | RNVC: 2
352005REP0: RNCC: 5 | RNVC: 2
352005REP0: RNCC: 5 | RNVC: 2

1 Jan 1967

5975-14-445-0355
Cable Marker Sleeve

144450355
1-114: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-27-020-4657
Metallic Raceway

270204657
100X40MM DORTLU: RNCC: 2 | RNVC: 1
100X40MM DORTLU: RNCC: 5 | RNVC: 2

9 Dec 2003

5975-14-423-3595
Junction Box

144233595
160G742040: RNCC: 3 | RNVC: 2

14 Apr 1988

5975-14-553-4705
Cable Marker Sleeve

145534705
0084102770: RNCC: 3 | RNVC: 2

5 Apr 2007

5975-15-201-4488
Cable Collar

152014488
164826249: RNCC: 3 | RNVC: 2

12 Sep 2006

5975-14-449-5773
Cable Marker Sleeve

144495773
03640002004W: RNCC: 3 | RNVC: 2
364002REPW: RNCC: 5 | RNVC: 2
3597470050477: RNCC: 5 | RNVC: 2

27 Aug 1991

5975-14-356-9389
Cable Marker Sleeve

143569389
03600109015L: RNCC: 3 | RNVC: 2
360109REPL: RNCC: 5 | RNVC: 2
V60REPL: RNCC: 5 | RNVC: 2
3597470038710: RNCC: 5 | RNVC: 2

15 May 1979

5975-15-100-3076
Blank Panel

151003076
301-0019/01: RNCC: 3 | RNVC: 2

10 Apr 1986

5975-14-520-3019
Interconnecting Box

145203019
50000221: RNCC: 3 | RNVC: 2
91660042: RNCC: 3 | RNVC: 2

17 May 2000

5975-14-481-2107
Raceway Cover

144812107
030925: RNCC: 3 | RNVC: 2
30925: RNCC: 5 | RNVC: 2
3245060309251: RNCC: 5 | RNVC: 2
5226075: RNCC: 5 | RNVC: 9
LG30925: RNCC: 5 | RNVC: 9

25 Apr 1996

5975-14-518-6380
Interconnecting Box

145186380
7703197811: RNCC: 3 | RNVC: 2

9 Feb 2000

5975-14-469-3871
Interior Cable Rack

144693871
166001: RNCC: 3 | RNVC: 2
89170112: RNCC: 5 | RNVC: 2

20 Apr 1994

5975-33-103-5035
Conduit Outlet

331035035
5010-C: RNCC: 3 | RNVC: 2

24 Apr 1995

5975-14-523-0743
Stuffing Tube

145230743
IC 110 20: RNCC: 3 | RNVC: 2
1 512 756 B 00: RNCC: 5 | RNVC: 2

20 Dec 2000

5975-14-384-0842
Stuffing Tube

143840842
NO PRIMARY REF14-384-0842: RNCC: 3 | RNVC: 2
206-2002-9: RNCC: 5 | RNVC: 9
709846: RNCC: 5 | RNVC: 9

4 May 1983

5975-14-433-5052
Cable Marker Sleeve

144335052
320-131-001-0: RNCC: 3 | RNVC: 2

2 Aug 1989

5975-14-409-0351
Cable Marker Sleeve

144090351
P10-3-2JOT: RNCC: 3 | RNVC: 2
P10-3-2JORTNR: RNCC: 5 | RNVC: 2
12450694-6: RNCC: 5 | RNVC: 2

16 Apr 1986

5975-27-017-0247
Stuffing Tube

270170247
305.03.00001: RNCC: 2 | RNVC: 1
PG-11: RNCC: 2 | RNVC: 1

1 May 2003

5975-14-466-3068
Stuffing Tube

144663068
T8653-10: RNCC: 3 | RNVC: 2
8930009623: RNCC: 5 | RNVC: 2

3 Nov 1993

5975-14-381-0887
Junction Box

143810887
NO PRIMARY REF14-381-0887: RNCC: 3 | RNVC: 2
6886-20: RNCC: 5 | RNVC: 9
BJ-441A: RNCC: 6 | RNVC: 9

25 Jan 1983

5975-14-404-7280
Cable Marker Sleeve

144047280
39049089: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-15-118-6572
Cable Collar

151186572
70935012: RNCC: 3 | RNVC: 2

1 Jul 1994

5975-14-382-6247
Cable Marker Sleeve

143826247
96080517: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-533-8002
Interconnecting Box

145338002
F1263393: RNCC: 3 | RNVC: 2

26 Feb 2003

5975-14-383-9540
Cable Marker Sleeve

143839540
78-15CXZ5S30LAB134JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ5S30JLAB134: RNCC: 5 | RNVC: 2
78-15CXZ5S30LAB134J: RNCC: 5 | RNVC: 2

4 May 1983

5975-15-156-7079
Cable Marker Sleeve

151567079
102/15: RNCC: 3 | RNVC: 2

4 Mar 2003

5975-14-421-2277
Stuffing Tube Plug

144212277
2059983: RNCC: 3 | RNVC: 2

11 Jan 1988

5975-14-362-6003
Cable Marker Sleeve

143626003
036002020138: RNCC: 3 | RNVC: 2
3597470040430: RNCC: 5 | RNVC: 2
V11REP8: RNCC: 5 | RNVC: 2
360102REP8: RNCC: 5 | RNVC: 2
360202REP8: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-333-2622
Cable Collar

143332622
15159618: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-15-204-3721
Junction Box

152043721
D8211218: RNCC: 3 | RNVC: 2

25 Oct 2011

5975-33-002-2275
Junction Box

330022275
921.403.04: RNCC: 3 | RNVC: 2

21 Oct 1993

5975-27-028-0086
Metallic Raceway

270280086
KANAL ASKI TASIYICI 105 MM: RNCC: 2 | RNVC: 1

25 Nov 2005

5975-14-440-5152
Cable Marker Sleeve

144405152
20130551: RNCC: 3 | RNVC: 2
20130551: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-402-1107
Cable Marker Sleeve

144021107
401618: RNCC: 3 | RNVC: 2
BGE401618: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-436-9065
Cable Marker Sleeve

144369065
BJM07317: RNCC: 3 | RNVC: 2

9 Jan 1990

5975-14-533-4914
Stuffing Tube

145334914
45089182: RNCC: 3 | RNVC: 2

5 Feb 2003

5975-14-404-8535
Cable Marker Sleeve

144048535
29747933: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-541-5255
Interconnecting Box

145415255
1091564-001: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-468-8475
Junction Box

144688475
238916: RNCC: 3 | RNVC: 2
106433: RNCC: 5 | RNVC: 2

23 Mar 1994

5975-14-338-6690
Junction Box

143386690
70149: RNCC: 3 | RNVC: 2

17 Dec 1976

5975-14-513-7953
Cable Marker Sleeve

145137953
036400010043: RNCC: 3 | RNVC: 2
3597470050019: RNCC: 5 | RNVC: 2
364001REP3: RNCC: 5 | RNVC: 2

14 Apr 1999

5975-14-209-5245
Cable Collar

142095245
21190: RNCC: 3 | RNVC: 2
21190: RNCC: 5 | RNVC: 9
21190: RNCC: 5 | RNVC: 9

1 Jan 1964

5975-14-453-5799
Cable Marker Sleeve

144535799
BAZ11714: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-540-0935
Junction Box

145400935
YSV1877: RNCC: 3 | RNVC: 2
SYQ4830: RNCC: 5 | RNVC: 2

4 Mar 2004

5975-14-366-4847
Push Button

143664847
L878-59: RNCC: 3 | RNVC: 2

20 Nov 1980

5975-14-316-4657
Interior Cable Rack

143164657
BN418-501F05B: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-546-1406
Nonmetallic Raceway

145461406
01821: RNCC: 3 | RNVC: 2
TA-E 40X40 G: RNCC: 5 | RNVC: 2
AA016612: RNCC: 6 | RNVC: 9

15 Jun 2005

5975-14-545-7299
Interconnecting Box

145457299
251968914-01: RNCC: 3 | RNVC: 2

3 May 2005

5975-14-449-0243
Junction Box

144490243
20324750: RNCC: 3 | RNVC: 2
20324750: RNCC: 5 | RNVC: 9

24 Jul 1991

5975-14-543-3628
Guide Rail

145433628
213306: RNCC: 3 | RNVC: 2

22 Oct 2004

5975-14-345-9703
Junction Box

143459703
18D165: RNCC: 3 | RNVC: 2

5 Nov 1977

5975-14-457-2426
Stuffing Tube

144572426
5006: RNCC: 3 | RNVC: 2

19 Aug 1992

5975-14-431-1916
Cable Marker Sleeve

144311916
035200070046: RNCC: 3 | RNVC: 2
352007REP6: RNCC: 5 | RNVC: 2
3597470259726: RNCC: 5 | RNVC: 2
DLT360305: RNCC: 5 | RNVC: 2

11 Apr 1989

5975-14-410-1567
Stuffing Tube

144101567
4176050: RNCC: 3 | RNVC: 2
5330-A1-000-4118: RNCC: 6 | RNVC: 9

4 Jun 1986

5975-14-452-3854
Cable Collar

144523854
51-54-02: RNCC: 3 | RNVC: 2

8 Jan 1992

5975-14-465-8271
Cable Marker Sleeve

144658271
PR174-48302: RNCC: 3 | RNVC: 2

14 Oct 1993

5975-14-416-7217
Cable Marker Sleeve

144167217
HT15-25BA11-028: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-409-0340
Cable Marker Sleeve

144090340
P10-3-2JOF: RNCC: 3 | RNVC: 2
P10-3-2JORFNR: RNCC: 5 | RNVC: 2
12450680-5: RNCC: 5 | RNVC: 2

16 Apr 1986

5975-14-545-9689
Cable Marker Sleeve

145459689
037401400046: RNCC: 3 | RNVC: 2
037401400046: RNCC: 5 | RNVC: 2
6070-GT-0000092: RNCC: 5 | RNVC: 9

31 May 2005

5975-14-332-1622
Push Button

143321622
LUF44F3550-17816AV5: RNCC: 3 | RNVC: 2
17816AV5: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-14-383-9542
Cable Marker Sleeve

143839542
78-15CXZ5S30LAB158JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ5S30JLAB158: RNCC: 5 | RNVC: 2
78-15CXZ5S30LAB158J: RNCC: 5 | RNVC: 2

4 May 1983

5975-14-409-0364
Cable Marker Sleeve

144090364
P15-3-2JOA: RNCC: 3 | RNVC: 2
P15-3-2JORANR: RNCC: 5 | RNVC: 2
12450837-2: RNCC: 5 | RNVC: 2

16 Apr 1986

5975-14-470-0477
Junction Box Cover

144700477
A02645-01-0000P007: RNCC: 3 | RNVC: 2

25 May 1994

5975-14-408-8801
Guide Rail

144088801
HL105P2-110-4: RNCC: 2 | RNVC: 2
00175111000: RNCC: 3 | RNVC: 2
C93-462: RNCC: 4 | RNVC: 1
MBBN3495W10: RNCC: 5 | RNVC: 2
RAR4372: RNCC: 5 | RNVC: 2
FV 2190804 ITEM 14: RNCC: 5 | RNVC: 2
FV 2190804/14: RNCC: 5 | RNVC: 2
AC/14/3/1216: RNCC: 5 | RNVC: 2
001751-110-00: RNCC: 5 | RNVC: 2

2 Apr 1986

5975-14-518-1806
Stuffing Tube

145181806
5010146281: RNCC: 3 | RNVC: 2

26 Jan 2000

5975-14-422-2894
Guy

144222894
120944: RNCC: 3 | RNVC: 2

24 Feb 1988

5975-14-390-2629
Interconnecting Box

143902629
4204131S004: RNCC: 3 | RNVC: 2
234-01N29726: RNCC: 5 | RNVC: 2

26 Jan 1984

5975-14-524-6820
Junction Box

145246820
23RSNW400000027PL2/2.PAGE34: RNCC: 3 | RNVC: 2
12D165-B12L165: RNCC: 3 | RNVC: 2
B12L165: RNCC: 5 | RNVC: 2
SYB3006: RNCC: 5 | RNVC: 2

4 Apr 2001

5975-14-306-0600
Rigid Metal Conduit

143060600
A10-63-800-30-2: RNCC: 3 | RNVC: 2
A10-63-800-30-2: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-495-3384
Ground Rod Section

144953384
117E447-00: RNCC: 3 | RNVC: 2
117E447-00: RNCC: 5 | RNVC: 9
F300 0T 019 0904: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-555-7858
Cable Marker Sleeve

145557858
0084102520: RNCC: 3 | RNVC: 2

14 Dec 2007

5975-14-395-9490
Push Button

143959490
40234: RNCC: 3 | RNVC: 2

27 Nov 1984

5975-14-554-5964
Cable Marker Sleeve

145545964
0084301090: RNCC: 3 | RNVC: 2

23 Jul 2007

5975-14-377-5691
Metallic Raceway

143775691
325492: RNCC: 3 | RNVC: 2
325492: RNCC: 5 | RNVC: 9

10 Jun 1982

5975-14-448-7889
Metallic Raceway

144487889
39529007: RNCC: 3 | RNVC: 2
39529007: RNCC: 5 | RNVC: 9

10 Jul 1991

5975-15-119-1040
Cable Collar

151191040
70932744: RNCC: 3 | RNVC: 2

4 Jul 1994

5975-14-518-9021
Interconnecting Box

145189021
092755W: RNCC: 3 | RNVC: 2
CHN092755W: RNCC: 5 | RNVC: 9

25 Feb 2000

5975-14-517-5459
Cable Marker Sleeve

145175459
207251: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-14-549-5563
Guide Rail

145495563
NSA937901R0680: RNCC: 1 | RNVC: 2
001101045100680: RNCC: 3 | RNVC: 2
NSA937901R0680: RNCC: 5 | RNVC: 2
NSA937901R0680: RNCC: 5 | RNVC: 2

14 Apr 2006

5975-27-056-5858
Cable Marker Sleeve

270565858
518032: RNCC: 5 | RNVC: 9

12 Apr 2012

5975-43-001-4931
Ground Rod

430014931
890.180.01.00: RNCC: 3 | RNVC: 2

5 Jul 2013

5975-14-541-8249
Interconnecting Box

145418249
HE1501F1X03: RNCC: 2 | RNVC: 2

26 Jun 2004

5975-14-484-4859
Interconnecting Box

144844859
P1002530E: RNCC: 3 | RNVC: 2
2007329X00: RNCC: 5 | RNVC: 2

21 Nov 1996

5975-14-517-5417
Interconnecting Box

145175417
CHP861MB016: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-14-497-4953
Interconnecting Box

144974953
1035513R01: RNCC: 3 | RNVC: 2
F300 0T 023 2687: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-462-2827
Blank Panel

144622827
SMCFAGEC0020E: RNCC: 3 | RNVC: 2

15 Apr 1993

5975-14-356-9168
Cable Marker Sleeve

143569168
03600103015F: RNCC: 3 | RNVC: 2
3597470035993: RNCC: 5 | RNVC: 2
360103REPF: RNCC: 5 | RNVC: 2
V16REPF: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-474-8666
Blank Panel

144748666
MC1031F00: RNCC: 3 | RNVC: 2

8 Mar 1995

5975-14-554-4114
Blank Panel

145544114
62056023AA: RNCC: 3 | RNVC: 2

2 Jul 2007

5975-14-400-0949
Junction Box

144000949
218079: RNCC: 3 | RNVC: 2

24 Apr 1985

5975-33-107-4773
Interconnecting Box

331074773
43 801 347: RNCC: 3 | RNVC: 2
2510010752: RNCC: 5 | RNVC: 2
2510010752: RNCC: 5 | RNVC: 2

11 Nov 1999

5975-14-212-1712
Stuffing Tube

142121712
51-62: RNCC: 3 | RNVC: 2

5 Jul 1980

5975-14-423-9490
Metallic Raceway

144239490
535912: RNCC: 3 | RNVC: 2

5 May 1988

5975-14-453-5730
Cable Marker Sleeve

144535730
BAZ9666: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-554-5988
Cable Marker Sleeve

145545988
0084303020: RNCC: 3 | RNVC: 2

24 Jul 2007

5975-14-356-9334
Cable Marker Sleeve

143569334
036002080072: RNCC: 3 | RNVC: 2
V40R0UGEREP2: RNCC: 5 | RNVC: 2
360208REP2: RNCC: 5 | RNVC: 2
3597470041000: RNCC: 5 | RNVC: 2
360107REP2: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-520-3260
Interconnecting Box

145203260
96173802: RNCC: 3 | RNVC: 2

17 May 2000

5975-15-158-0181
Cable Marker Sleeve

151580181
47915A126330: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-520-4078
Cable Marker Sleeve

145204078
554351G0010: RNCC: 3 | RNVC: 2

17 May 2000

5975-14-360-8131
Cable Marker Sleeve

143608131
490678G0016: RNCC: 3 | RNVC: 2

19 Dec 1979

5975-33-200-1014
Ground Rod

332001014
SHN2020801: RNCC: 3 | RNVC: 2

5 Oct 2001

5975-14-408-8520
Push Button

144088520
348000091 MARINE: RNCC: 3 | RNVC: 9

2 Apr 1986

5975-14-504-2935
Cable Marker Sleeve

145042935
3697091M1: RNCC: 3 | RNVC: 2

11 Feb 1998

5975-14-450-4383
Stuffing Tube

144504383
50132: RNCC: 3 | RNVC: 2

9 Oct 1991

5975-14-461-2465
Junction Box

144612465
46041137: RNCC: 3 | RNVC: 2

3 Mar 1993

5975-14-543-3612
Guide Rail

145433612
212890: RNCC: 3 | RNVC: 2

22 Oct 2004

5975-14-505-4137
Interconnecting Box

145054137
12052001: RNCC: 3 | RNVC: 2

18 Mar 1998

5975-14-484-3199
Interconnecting Box

144843199
4877A: RNCC: 3 | RNVC: 2

7 Nov 1996

5975-14-411-0181
Push Button

144110181
1956PSR001: RNCC: 3 | RNVC: 2

30 Jul 1986

5975-14-385-2677
Switch Box Case

143852677
281430: RNCC: 3 | RNVC: 2
281430: RNCC: 5 | RNVC: 9

26 Jul 1983

5975-14-440-5134
Cable Marker Sleeve

144405134
20130529: RNCC: 3 | RNVC: 2
20130529: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-440-3567
Stuffing Tube

144403567
3511 271 80461: RNCC: 3 | RNVC: 2

11 Jul 1990

5975-14-306-9955
Stuffing Tube

143069955
331694: RNCC: 3 | RNVC: 2
331694: RNCC: 5 | RNVC: 9

1 Jan 1974

5975-14-550-8350
Interconnecting Box

145508350
294SP264: RNCC: 3 | RNVC: 2

19 Jul 2006

5975-14-299-6954
Stuffing Tube

142996954
520300: RNCC: 3 | RNVC: 2
BB3: RNCC: 3 | RNVC: 2
52030: RNCC: 5 | RNVC: 2

1 Jan 1973

5975-33-002-0485
Cable Hanger

330020485
60.60.07: RNCC: 3 | RNVC: 2

7 Aug 1992

5975-27-026-6838
Cable Collar

270266838
500013584605: RNCC: 2 | RNVC: 1

20 Jul 2005

5975-14-459-3803
Chassis Base

144593803
39958256: RNCC: 3 | RNVC: 2
39958256: RNCC: 5 | RNVC: 9

26 Nov 1992

5975-14-318-0488
Cable Marker Sleeve

143180488
0084051850: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-504-1047
Interconnecting Box

145041047
AL1008F00: RNCC: 3 | RNVC: 2

6 Feb 1998

5975-14-482-6538
Rigid Metal Conduit

144826538
D60276: RNCC: 3 | RNVC: 2

18 Jul 1996

5975-14-356-9170
Cable Marker Sleeve

143569170
03600103015H: RNCC: 3 | RNVC: 2
360103REPH: RNCC: 5 | RNVC: 2
V16REPH: RNCC: 5 | RNVC: 2
3597470036037: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-300-3202
Fanning Strip

143003202
15437142: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-513-5609
Blank Panel

145135609
DE11406: RNCC: 3 | RNVC: 2

24 Mar 1999

5975-14-505-8288
Interconnecting Box

145058288
AL1151F00: RNCC: 3 | RNVC: 2

26 Mar 1998

5975-14-551-3229
Nonmetallic Raceway

145513229
FRA501001A: RNCC: 3 | RNVC: 2
FRA501001A: RNCC: 5 | RNVC: 2

12 Sep 2006

5975-27-013-5240
Junction Box

270135240
K 9060: RNCC: 2 | RNVC: 1

25 Jun 2002

5975-14-394-9055
Nonmetallic Raceway

143949055
13012: RNCC: 3 | RNVC: 2
G030X33C: RNCC: 5 | RNVC: 2

2 Oct 1984

5975-14-383-1295
Cable Marker Sleeve

143831295
19S954: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-15-136-4713
Cable Collar

151364713
05409-103: RNCC: 3 | RNVC: 2

9 Oct 1996

5975-14-383-0550
Cable Marker Sleeve

143830550
16899479: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-425-4637
Cable Marker Sleeve

144254637
20130271: RNCC: 3 | RNVC: 2
20130271: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-14-404-8470
Cable Marker Sleeve

144048470
29747880: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-404-8403
Cable Marker Sleeve

144048403
29747505: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-33-001-6987
Junction Box

330016987
M50112950C000: RNCC: 3 | RNVC: 2

29 Aug 1996

5975-14-483-1968
Chassis Base

144831968
ALZ081055227001: RNCC: 3 | RNVC: 2

22 Aug 1996

5975-14-360-0444
Guy

143600444
DHV3545: RNCC: 3 | RNVC: 2
26000289: RNCC: 5 | RNVC: 2
DHV3545: RNCC: 5 | RNVC: 9
DHV3545: RNCC: 5 | RNVC: 9

31 Oct 1979

5975-15-203-9578
Drive Ring

152039578
22500694H: RNCC: 3 | RNVC: 2
(241)A486722500694H: RNCC: 5 | RNVC: 2

29 Jul 2011

5975-14-372-0999
Conduit Outlet

143720999
63572: RNCC: 3 | RNVC: 2
99063572000: RNCC: 5 | RNVC: 9

1 Sep 1981

5975-27-023-0179
Stuffing Tube Plug

270230179
22399: RNCC: 2 | RNVC: 1

12 May 2004

5975-14-454-5883
Metallic Raceway

144545883
317960: RNCC: 3 | RNVC: 2
317960: RNCC: 5 | RNVC: 9

7 Apr 1992

5975-14-356-9417
Cable Marker Sleeve

143569417
03600106015-: RNCC: 3 | RNVC: 2
360106SYMB-: RNCC: 5 | RNVC: 2
360106SYMBM: RNCC: 5 | RNVC: 2
V37SYMBM: RNCC: 5 | RNVC: 2
3597470037201: RNCC: 5 | RNVC: 2

15 May 1979

5975-33-203-7017
Stuffing Tube

332037017
204800304: RNCC: 3 | RNVC: 2
204800304: RNCC: 5 | RNVC: 2

9 Sep 2004

5975-14-254-1087
Cable Marker Sleeve

142541087
03520003004-: RNCC: 3 | RNVC: 2
99061513: RNCC: 5 | RNVC: 2
352003SYMB-: RNCC: 5 | RNVC: 2
HELAVIATWIN2REPSIGNEM: RNCC: 5 | RNVC: 2
352003SYMBM: RNCC: 5 | RNVC: 2
99061513: RNCC: 5 | RNVC: 9
99061513: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-305-3435
Push Button

143053435
1106504-2GBG: RNCC: 3 | RNVC: 2
B0UT0N10N0IRGRAVE2: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-545-2106
Nonmetallic Raceway

145452106
10453: RNCC: 3 | RNVC: 2
AA013080: RNCC: 6 | RNVC: 9

24 Mar 2005

5975-14-362-6018
Cable Marker Sleeve

143626018
036002120053: RNCC: 3 | RNVC: 2
3597470041383: RNCC: 5 | RNVC: 2
360111REP3: RNCC: 5 | RNVC: 2
360212REP3: RNCC: 5 | RNVC: 2
V80REP3: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-440-5497
Cable Marker Sleeve

144405497
20130516: RNCC: 3 | RNVC: 2
20130516: RNCC: 3 | RNVC: 9

17 Jul 1990

5975-14-322-8887
Cable Marker Sleeve

143228887
0084052470: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-042-6778
Junction Box

140426778
12DMLRE: RNCC: 3 | RNVC: 2

15 May 1979

5975-14-369-6169
Junction Box

143696169
487702R3105: RNCC: 3 | RNVC: 2
F3016487702R3105: RNCC: 5 | RNVC: 2

17 Apr 1981

5975-14-487-6488
Guide Rail

144876488
RM7549: RNCC: 3 | RNVC: 2

18 Apr 1997

5975-14-501-4560
Junction Box

145014560
0197044M1-04P1: RNCC: 3 | RNVC: 2

29 Oct 1997

5975-14-439-4843
Stuffing Tube

144394843
515200-AMIANTE: RNCC: 3 | RNVC: 9
BVLEFS2: RNCC: 5 | RNVC: 2

9 May 1990

5975-14-371-9864
Push Button

143719864
22TCEL0: RNCC: 3 | RNVC: 2

5 Aug 1981

5975-14-380-9645
Junction Box

143809645
20104931: RNCC: 3 | RNVC: 9

14 Dec 1982

5975-14-356-9216
Cable Marker Sleeve

143569216
03600104015S: RNCC: 3 | RNVC: 2
V22REPS: RNCC: 5 | RNVC: 2
3597470036617: RNCC: 5 | RNVC: 2
360104REPS: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-541-7967
Stuffing Tube

145417967
098022: RNCC: 3 | RNVC: 2

26 Jun 2004

5975-33-190-3036
Conduit Outlet

331903036
9971: RNCC: 3 | RNVC: 2

20 Jul 1995

5975-14-533-8032
Cable Marker Sleeve

145338032
38151: RNCC: 3 | RNVC: 2

26 Feb 2003

5975-14-254-1145
Cable Marker Sleeve

142541145
03520003004X: RNCC: 3 | RNVC: 2
HELAVIATWIN2REPX: RNCC: 5 | RNVC: 2
352003REPX: RNCC: 5 | RNVC: 2

1 Jan 1969

5975-33-103-5141
Metallic Raceway

331035141
1396: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-14-356-9396
Cable Marker Sleeve

143569396
03600109015S: RNCC: 3 | RNVC: 2
3597470038819: RNCC: 5 | RNVC: 2
360109REPS: RNCC: 5 | RNVC: 2
V60REPS: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-405-8470
Stuffing Tube

144058470
91373062: RNCC: 3 | RNVC: 9

4 Dec 1985

5975-14-521-2125
Cable Marker Sleeve

145212125
TS143779: RNCC: 3 | RNVC: 2

12 Jul 2000

5975-27-019-3986
Cable Marker Sleeve

270193986
10091MN0002: RNCC: 2 | RNVC: 1

15 Nov 2003

5975-15-000-0859
Junction Box

150000859
MG12C: RNCC: 3 | RNVC: 2

6 Feb 2013

5975-14-486-3908
Stuffing Tube

144863908
08809: RNCC: 3 | RNVC: 2

12 Mar 1997

5975-14-326-6563
Junction Box

143266563
6D145: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-518-6368
Interconnecting Box

145186368
7701996123: RNCC: 3 | RNVC: 2

9 Feb 2000

5975-14-439-1357
Interconnecting Box

144391357
5000787275: RNCC: 3 | RNVC: 2

25 Apr 1990

5975-14-501-5809
Metallic Raceway

145015809
46158728: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-14-423-7691
Cable Marker Sleeve

144237691
259702: RNCC: 3 | RNVC: 2

28 Apr 1988

5975-14-259-7109
Junction Box Cover

142597109
309179: RNCC: 3 | RNVC: 2

1 Jan 1969

5975-14-421-0084
Switch Box Case

144210084
39233334: RNCC: 3 | RNVC: 2
39233334: RNCC: 5 | RNVC: 9

6 Jan 1988

5975-14-421-0085
Switch Box Case

144210085
39233339: RNCC: 3 | RNVC: 2
39233339: RNCC: 5 | RNVC: 9

6 Jan 1988

5975-27-020-8079
Guide Rail

270208079
05001HR0077: RNCC: 2 | RNVC: 1
05001HR0077: RNCC: 5 | RNVC: 9

15 Dec 2003

5975-14-544-5545
Stuffing Tube

145445545
980 19: RNCC: 3 | RNVC: 2
98019: RNCC: 5 | RNVC: 2
AA003775: RNCC: 6 | RNVC: 9

10 Feb 2005

5975-14-288-3593
Cable Marker Sleeve

142883593
2529-3XA10: RNCC: 3 | RNVC: 2
2529-3XA10: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-259-7064
Junction Box

142597064
309101: RNCC: 3 | RNVC: 2

1 Jan 1969

5975-14-453-7739
Junction Box

144537739
089125: RNCC: 3 | RNVC: 2
3245060891251: RNCC: 5 | RNVC: 2
89125: RNCC: 5 | RNVC: 2
174-4616: RNCC: 5 | RNVC: 2
5313095: RNCC: 5 | RNVC: 9
LG89125: RNCC: 5 | RNVC: 9

10 Mar 1992

5975-14-533-7012
Fanning Strip

145337012
07148: RNCC: 3 | RNVC: 2
EN001939: RNCC: 6 | RNVC: 9

19 Feb 2003

5975-14-362-6035
Cable Marker Sleeve

143626035
03600101015K: RNCC: 3 | RNVC: 2
3597470035184: RNCC: 5 | RNVC: 2
360101REPK: RNCC: 5 | RNVC: 2
V09REPK: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-456-5015
Electrical Clamp

144565015
MLT10H: RNCC: 3 | RNVC: 2

7 Jul 1992

5975-14-448-9516
Interconnecting Box

144489516
008067010P: RNCC: 3 | RNVC: 2

24 Jul 1991

5975-14-372-0468
Interconnecting Box

143720468
0819P016002: RNCC: 3 | RNVC: 2

1 Sep 1981

5975-14-428-8478
Interconnecting Box

144288478
16630192: RNCC: 3 | RNVC: 2
16630192: RNCC: 5 | RNVC: 9

22 Dec 1988

5975-14-356-9353
Cable Marker Sleeve

143569353
03600108015L: RNCC: 3 | RNVC: 2
3597470038277: RNCC: 5 | RNVC: 2
V50REPL: RNCC: 5 | RNVC: 2
360108REPL: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-545-8419
Stuffing Tube

145458419
1368520: RNCC: 3 | RNVC: 2

19 May 2005

5975-14-404-1846
Push Button

144041846
16799295: RNCC: 3 | RNVC: 2
16799295: RNCC: 3 | RNVC: 9

11 Sep 1985

5975-14-447-7292
Cable Collar

144477292
200181000: RNCC: 3 | RNVC: 2

29 May 1991

5975-15-193-8021
Junction Box

151938021
A88015568B: RNCC: 3 | RNVC: 2
(241)A1615A88015568B: RNCC: 5 | RNVC: 2

19 Jul 2010

5975-14-394-5686
Junction Box

143945686
263E64346111000010: RNCC: 3 | RNVC: 2

28 Aug 1984

5975-14-480-2162
Nonmetallic Raceway

144802162
L2232: RNCC: 3 | RNVC: 2

28 Feb 1996

5975-14-534-7063
Stuffing Tube

145347063
10467015: RNCC: 3 | RNVC: 2

2 Apr 2003

5975-33-155-2035
Stuffing Tube

331552035
25,16.56: RNCC: 3 | RNVC: 2

12 Jun 1990

5975-14-490-0341
Interconnecting Box

144900341
TSXFPACC4: RNCC: 3 | RNVC: 2
3389110436730: RNCC: 5 | RNVC: 2
5549093: RNCC: 5 | RNVC: 9
TSXFPACC4: RNCC: 5 | RNVC: 9

10 Sep 1997

5975-14-298-0613
Junction Box

142980613
034A610: RNCC: 3 | RNVC: 2
034A610: RNCC: 5 | RNVC: 2

1 Jan 1973

5975-14-403-0561
Cable Marker Sleeve

144030561
38206833: RNCC: 3 | RNVC: 2

25 Jul 1985

5975-14-484-4552
Junction Box

144844552
50008584: RNCC: 3 | RNVC: 2

20 Nov 1996

5975-14-356-9373
Cable Marker Sleeve

143569373
036002090035: RNCC: 3 | RNVC: 2
3597470041062: RNCC: 5 | RNVC: 2
360108REP5: RNCC: 5 | RNVC: 2
360209REP5: RNCC: 5 | RNVC: 2
V50VERTREP5: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-343-4867
Junction Box Cover

143434867
EA1M661-10-870N1: RNCC: 3 | RNVC: 2
EA1M661-10-870: RNCC: 5 | RNVC: 2

16 Jun 1977

5975-14-403-4376
Cable Marker Sleeve

144034376
401677: RNCC: 3 | RNVC: 2
BGE401677: RNCC: 3 | RNVC: 2

21 Aug 1985

5975-14-551-3930
Interconnecting Box

145513930
S880A50A1034: RNCC: 1 | RNVC: 2
SE11960: RNCC: 3 | RNVC: 2

15 Sep 2006

5975-14-554-5957
Cable Marker Sleeve

145545957
0084301020: RNCC: 3 | RNVC: 2

23 Jul 2007

5975-33-200-7221
Fanning Strip

332007221
394 52: RNCC: 3 | RNVC: 2

5 Mar 2002

5975-14-480-0177
Stuffing Tube

144800177
240789: RNCC: 3 | RNVC: 2

21 Feb 1996

5975-14-400-0917
Junction Box

144000917
215423: RNCC: 3 | RNVC: 2

24 Apr 1985

5975-27-025-9049
Raceway Cover

270259049
205 60: RNCC: 2 | RNVC: 1
20560: RNCC: 5 | RNVC: 9

29 Apr 2005

5975-14-331-4019
Junction Box

143314019
1363222: RNCC: 3 | RNVC: 2
K432HB2: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-499-4355
Cable Marker Sleeve

144994355
5600023-060247-000-0-10: RNCC: 3 | RNVC: 2
5600023-060247.000.0-10: RNCC: 5 | RNVC: 2
F300 0T 022 0893: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-27-021-0671
Guide Rail

270210671
1010FK-1911038: RNCC: 2 | RNVC: 1

15 Dec 2003

5975-27-052-2874
Raceway Elbow

270522874
002 02 101050: RNCC: 2 | RNVC: 2

3 Jan 2011

5975-14-402-9447
Blank Panel

144029447
29737424: RNCC: 3 | RNVC: 2
29737424: RNCC: 5 | RNVC: 9

25 Jul 1985

5975-14-442-9105
Chassis Base

144429105
20213294: RNCC: 3 | RNVC: 2
20213294: RNCC: 5 | RNVC: 9

7 Nov 1990

5975-14-400-5473
Conduit Outlet

144005473
1233-269-000: RNCC: 3 | RNVC: 2

6 May 1985

5975-14-505-4139
Interconnecting Box

145054139
NO PRIMARY REF14-505-4139: RNCC: 3 | RNVC: 2
12052004: RNCC: 5 | RNVC: 9

18 Mar 1998

5975-27-048-8911
Blank Panel

270488911
10029256: RNCC: 2 | RNVC: 1

16 Mar 2010

5975-14-440-4973
Cable Marker Sleeve

144404973
20315452: RNCC: 3 | RNVC: 2
20315452: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-424-2222
Metallic Raceway

144242222
006925041P: RNCC: 3 | RNVC: 2

19 May 1988

5975-14-478-8773
Stuffing Tube Plug

144788773
251102: RNCC: 3 | RNVC: 2

29 Nov 1995

5975-14-525-5439
Interconnecting Box

145255439
5645018H00: RNCC: 3 | RNVC: 2
SYB3292: RNCC: 5 | RNVC: 2

13 Jun 2001

5975-14-457-4806
Junction Box

144574806
01233311: RNCC: 3 | RNVC: 2
1233311: RNCC: 5 | RNVC: 2

8 Sep 1992

5975-14-339-4468
Cable Marker Sleeve

143394468
620-849-058-0: RNCC: 3 | RNVC: 2
620-849-058-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-524-6807
Junction Box

145246807
5DP55-F5P55: RNCC: 3 | RNVC: 2
23RNSW400000027PL2/2.PAGE57: RNCC: 3 | RNVC: 2
SYB2990: RNCC: 5 | RNVC: 2
F5P55: RNCC: 5 | RNVC: 2

4 Apr 2001

5975-14-453-5805
Cable Marker Sleeve

144535805
BAZ11723: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-355-2542
Conduit Outlet

143552542
525692: RNCC: 3 | RNVC: 2
00525692: RNCC: 5 | RNVC: 2

19 Mar 1979

5975-33-005-1829
Interconnecting Box

330051829
SP06575: RNCC: 3 | RNVC: 2

28 Dec 2000

5975-14-399-1271
Junction Box

143991271
5000806066: RNCC: 3 | RNVC: 2

6 Mar 1985

5975-14-404-8409
Cable Marker Sleeve

144048409
29747511: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-553-1666
Stuffing Tube

145531666
380135: RNCC: 3 | RNVC: 2

8 Mar 2007

5975-14-405-2984
Push Button

144052984
8007130700: RNCC: 3 | RNVC: 2
80071307: RNCC: 5 | RNVC: 2
942477: RNCC: 5 | RNVC: 2

27 Nov 1985

5975-14-516-2880
Cable Marker Sleeve

145162880
NSA937201MG1200: RNCC: 3 | RNVC: 2

15 Sep 1999

5975-14-373-4500
Stuffing Tube

143734500
NO PRIMARY REF14-373-4500: RNCC: 3 | RNVC: 2
469: RNCC: 5 | RNVC: 9
655: RNCC: 5 | RNVC: 9

21 Oct 1981

5975-14-517-4690
Stuffing Tube

145174690
93400: RNCC: 3 | RNVC: 2

15 Dec 1999

5975-14-362-6108
Cable Marker Sleeve

143626108
03600111015F: RNCC: 3 | RNVC: 2
3597470039519: RNCC: 5 | RNVC: 2
360111REPF: RNCC: 5 | RNVC: 2
V80REPF: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-533-1187
Blank Panel

145331187
3199363: RNCC: 3 | RNVC: 2

23 Jan 2003

5975-33-201-4085
Chassis Base

332014085
222433316-01: RNCC: 3 | RNVC: 2

8 Jul 2002

5975-15-134-2097
Cable Collar

151342097
112-02: RNCC: 3 | RNVC: 2

9 Oct 1996

5975-14-476-6774
Interconnecting Box

144766774
46044710: RNCC: 3 | RNVC: 2

28 Jun 1995

5975-14-518-1896
Interconnecting Box

145181896
7701996125: RNCC: 3 | RNVC: 2

26 Jan 2000

5975-14-518-0392
Cable Marker Sleeve

145180392
207257: RNCC: 3 | RNVC: 2

21 Jan 2000

5975-14-355-2465
Cable Marker Sleeve

143552465
594501603: RNCC: 3 | RNVC: 2

19 Mar 1979

5975-14-376-6352
Stuffing Tube

143766352
811: RNCC: 3 | RNVC: 2
A33752M12: RNCC: 5 | RNVC: 2
08811: RNCC: 5 | RNVC: 2

28 Apr 1982

5975-14-297-8378
Junction Box

142978378
T871-51-0243: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-27-056-5741
Cable Marker Sleeve

270565741
517029: RNCC: 5 | RNVC: 9

11 Apr 2012

5975-14-474-1772
Chassis Base

144741772
30390548: RNCC: 3 | RNVC: 2
30390548K: RNCC: 5 | RNVC: 2

1 Feb 1995

5975-14-402-4596
Junction Box

144024596
20845050: RNCC: 3 | RNVC: 2

3 Jul 1985

5975-14-431-2224
Push Button

144312224
V12DD01: RNCC: 3 | RNVC: 9

12 Apr 1989

5975-14-554-5587
Stuffing Tube

145545587
509200: RNCC: 3 | RNVC: 2
BVLE2: RNCC: 5 | RNVC: 2
20008146: RNCC: 5 | RNVC: 2

19 Jul 2007

5975-14-476-1400
Cable Marker Sleeve

144761400
HOI50-4RO-N: RNCC: 3 | RNVC: 2
HOI50-RO-N: RNCC: 3 | RNVC: 2
HOI50-N: RNCC: 5 | RNVC: 2
HOI50-N-ROSE: RNCC: 5 | RNVC: 2
0617175: RNCC: 5 | RNVC: 2

24 May 1995

5975-14-331-7585
Cable Marker Sleeve

143317585
NO PRIMARY REF14-331-7585: RNCC: 3 | RNVC: 2
9560115500: RNCC: 5 | RNVC: 2
35777-2: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-14-448-4078
Stuffing Tube

144484078
08040221: RNCC: 3 | RNVC: 2
91479139: RNCC: 5 | RNVC: 2
804022118P: RNCC: 5 | RNVC: 2

26 Jun 1991

5975-14-254-1150
Cable Marker Sleeve

142541150
352004REPC: RNCC: 3 | RNVC: 2
HELAVIATWIN3REPC: RNCC: 5 | RNVC: 2
99008765: RNCC: 5 | RNVC: 2
99008765: RNCC: 5 | RNVC: 9
99008765: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-404-8459
Cable Marker Sleeve

144048459
29747561: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-33-107-9843
Blank Panel

331079843
221.000.001: RNCC: 3 | RNVC: 2

2 Nov 2000

5975-14-465-8260
Cable Marker Sleeve

144658260
PR158-48302: RNCC: 3 | RNVC: 2

14 Oct 1993

5975-14-460-3322
Junction Box

144603322
318881: RNCC: 3 | RNVC: 2
318881: RNCC: 5 | RNVC: 9

21 Jan 1993

5975-14-497-9048
Cable Marker Sleeve

144979048
0084102830: RNCC: 3 | RNVC: 2

22 Oct 1997

5975-14-473-1044
Fanning Strip

144731044
413010: RNCC: 3 | RNVC: 2
413010: RNCC: 5 | RNVC: 9

7 Dec 1994

5975-15-101-1336
Blank Panel

151011336
130-2542/01: RNCC: 3 | RNVC: 2

1 Jan 1994

5975-14-392-0771
Cable Marker Sleeve

143920771
320-049-601-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5975-14-383-9544
Cable Marker Sleeve

143839544
78-15CXZ5S30LAB170JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ5S30JLAB170: RNCC: 5 | RNVC: 2
78-15CXZ5S30LAB170J: RNCC: 5 | RNVC: 2

4 May 1983

5975-14-469-7909
Interconnecting Box

144697909
45-0442: RNCC: 3 | RNVC: 2

10 May 1994

5975-27-039-9436
Metallic Raceway

270399436
5975-37526-00057: RNCC: 5 | RNVC: 2

28 Dec 2007

5975-14-469-9634
Cable Marker Sleeve

144699634
213793-01: RNCC: 3 | RNVC: 2

18 May 1994

5975-14-275-1479
Guy Set

142751479
E20-1303A10: RNCC: 3 | RNVC: 2
E20-1303A10: RNCC: 5 | RNVC: 9

1 Jan 1971

5975-14-416-7435
Cable Marker Sleeve

144167435
HT30-25BA13-011: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-15-055-7938
Interior Cable Rack

150557938
128852A1: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-505-0645
Cable Hanger

145050645
23203021: RNCC: 3 | RNVC: 2

11 Mar 1998

5975-14-238-2244
Cable Marker Sleeve

142382244
352002REP2: RNCC: 3 | RNVC: 2
99022953: RNCC: 3 | RNVC: 2
99022953: RNCC: 5 | RNVC: 2
352-02REP2: RNCC: 5 | RNVC: 2
HELAVIATWIN1REP2: RNCC: 5 | RNVC: 2
99022953: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-314-8147
Push Button

143148147
NO PRIMARY REF14-314-8147: RNCC: 3 | RNVC: 2
4094SN1010L: RNCC: 5 | RNVC: 9

1 Jan 1974

5975-15-201-7669
Cable Marker Sleeve

152017669
ISSTF03087: RNCC: 3 | RNVC: 2
821VN5039: RNCC: 5 | RNVC: 2

12 Dec 2006

5975-15-158-0196
Cable Marker Sleeve

151580196
47915A126480: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-479-6815
Interconnecting Box

144796815
11095E310200: RNCC: 3 | RNVC: 2

31 Jan 1996

5975-33-107-7103
Ground Rod

331077103
38.102: RNCC: 3 | RNVC: 2

17 Apr 2000

5975-14-309-6701
Junction Box

143096701
121S63-247-10-07: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-348-4457
Cable Collar

143484457
032037: RNCC: 3 | RNVC: 2
32037: RNCC: 5 | RNVC: 2
3245060320379: RNCC: 5 | RNVC: 2
WX1232A00: RNCC: 5 | RNVC: 2
5322471: RNCC: 5 | RNVC: 9
LG32037: RNCC: 5 | RNVC: 9

29 Mar 1978

5975-14-462-0510
Junction Box

144620510
214575: RNCC: 3 | RNVC: 2

31 Mar 1993

5975-14-509-2166
Metallic Raceway

145092166
46238251: RNCC: 3 | RNVC: 2

21 Oct 1998

5975-14-443-7285
Cable Hanger

144437285
5100000107: RNCC: 3 | RNVC: 2

5 Dec 1990

5975-33-209-3117
Stuffing Tube

332093117
INS003002080070000: RNCC: 3 | RNVC: 2

28 Sep 2011

5975-14-445-4409
Cable Marker Sleeve

144454409
ML1110F00: RNCC: 3 | RNVC: 2

14 Feb 1991

5975-14-439-3238
Cable Marker Sleeve

144393238
D51900-163: RNCC: 3 | RNVC: 2

25 Apr 1990

5975-14-404-8523
Cable Marker Sleeve

144048523
29747919: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-328-9396
Junction Box

143289396
04420: RNCC: 3 | RNVC: 2
4420-095602: RNCC: 3 | RNVC: 9
4420: RNCC: 5 | RNVC: 2
4420: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-425-4680
Cable Marker Sleeve

144254680
29366565: RNCC: 3 | RNVC: 2
29366565: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-14-371-3503
Cable Collar

143713503
11-610-200: RNCC: 3 | RNVC: 2
11-610-200: RNCC: 5 | RNVC: 9

5 Aug 1981

5975-33-211-2387
Interconnecting Box

332112387
ST01146: RNCC: 3 | RNVC: 2

20 Jul 2013

5975-14-457-6848
Cable Collar

144576848
1-00402040: RNCC: 3 | RNVC: 2

15 Sep 1992

5975-14-439-1773
Cable Marker Sleeve

144391773
TMS1-4-9: RNCC: 3 | RNVC: 9
TMS1-4-9: RNCC: 5 | RNVC: 2
91364583: RNCC: 5 | RNVC: 2

25 Apr 1990

5975-14-402-6131
Cable Marker Sleeve

144026131
TMSNR501MBLANC: RNCC: 3 | RNVC: 9
12451245-7: RNCC: 5 | RNVC: 2

19 Jul 1985

5975-14-532-2360
Cable Marker Sleeve

145322360
208828: RNCC: 3 | RNVC: 2

23 Oct 2002

5975-14-358-3892
Junction Box

143583892
392090: RNCC: 3 | RNVC: 2

13 Aug 1979

5975-14-517-7364
Cable Marker Sleeve

145177364
320-315-101-0: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-14-339-4399
Cable Marker Sleeve

143394399
620-844-147-0: RNCC: 3 | RNVC: 2
620-844-147-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-15-102-0930
Blank Panel

151020930
193-0486/14: RNCC: 3 | RNVC: 2

22 Jun 1986

5975-14-416-7355
Cable Marker Sleeve

144167355
HT30-25BA13-041: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-031-9347
Junction Box Cover

140319347
A11A612260320N1: RNCC: 3 | RNVC: 2

5 Jul 1980

5975-15-000-6232
Junction Box

150006232
05504: RNCC: 3 | RNVC: 2

25 Mar 2013

5975-14-356-9224
Cable Marker Sleeve

143569224
036002040100: RNCC: 3 | RNVC: 2
3597470040621: RNCC: 5 | RNVC: 2
360104REP0: RNCC: 5 | RNVC: 2
360204REP0: RNCC: 5 | RNVC: 2
V22N0IRREP0: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-238-2839
Cable Marker Sleeve

142382839
03520006004F: RNCC: 3 | RNVC: 2
99026328: RNCC: 5 | RNVC: 2
HELAVIATWIN5REPF: RNCC: 5 | RNVC: 2
352006REPF: RNCC: 5 | RNVC: 2
99026328: RNCC: 5 | RNVC: 9
99026328: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-430-9080
Conduit Outlet

144309080
249056: RNCC: 3 | RNVC: 2

29 Mar 1989

5975-14-383-0038
Nonmetallic Raceway

143830038
4770202590: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-428-2826
Crossarm Brace

144282826
19A4118: RNCC: 3 | RNVC: 2

8 Dec 1988

5975-14-549-3331
Insulator Bracket

145493331
61771765AA: RNCC: 3 | RNVC: 2

22 Mar 2006

5975-14-461-0593
Stuffing Tube

144610593
93401: RNCC: 3 | RNVC: 2
5531268: RNCC: 5 | RNVC: 9
LG93401: RNCC: 5 | RNVC: 9

22 Feb 1993

5975-14-469-3672
Interconnecting Box

144693672
305386: RNCC: 3 | RNVC: 2
305386: RNCC: 5 | RNVC: 9

20 Apr 1994

5975-14-453-4938
Cable Marker Sleeve

144534938
353042-01REPN: RNCC: 3 | RNVC: 2

24 Feb 1992

5975-14-362-4229
Cable Marker Sleeve

143624229
78-15CXZ11S30LAB052J: RNCC: 3 | RNVC: 2
78-15CXZ11S30LAB052JAUNE: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-499-3563
Interconnecting Box

144993563
5010217521: RNCC: 3 | RNVC: 2
960370: RNCC: 3 | RNVC: 2
F300 0T 021 7449: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-421-7094
Cable Marker Sleeve

144217094
0264702520: RNCC: 3 | RNVC: 2

27 Jan 1988

5975-14-504-8354
Nonmetallic Raceway

145048354
030038: RNCC: 3 | RNVC: 2
3245060300388: RNCC: 5 | RNVC: 2
30038: RNCC: 5 | RNVC: 2
LG30038: RNCC: 5 | RNVC: 9
5226146: RNCC: 5 | RNVC: 9

4 Mar 1998

5975-14-429-6049
Blank Panel

144296049
3T0140740900: RNCC: 3 | RNVC: 2

1 Feb 1989

5975-14-523-1880
Interior Cable Rack

145231880
45711040/003: RNCC: 3 | RNVC: 2
45711040: RNCC: 5 | RNVC: 2

10 Jan 2001

5975-14-475-3188
Cable Marker Sleeve

144753188
HT100-35JORW043736: RNCC: 3 | RNVC: 2
HT100-35JOW043736: RNCC: 5 | RNVC: 2

29 Mar 1995

5975-15-205-3339
Junction Box

152053339
TSG0379/18: RNCC: 3 | RNVC: 2

2 Mar 2012

5975-27-050-7968
Stuffing Tube

270507968
TK-04-1200609: RNCC: 2 | RNVC: 1

27 Aug 2010

5975-14-428-5352
Conduit Outlet

144285352
NO PRIMARY REF14-428-5352: RNCC: 3 | RNVC: 2
57665: RNCC: 5 | RNVC: 9

8 Dec 1988

5975-14-469-3659
Interconnecting Box

144693659
287840: RNCC: 3 | RNVC: 2
287840: RNCC: 5 | RNVC: 9

20 Apr 1994

5975-14-472-1991
Insulator Pin

144721991
DAV25282: RNCC: 3 | RNVC: 2

12 Oct 1994

5975-14-493-4425
Cable Marker Sleeve

144934425
BGE011177: RNCC: 3 | RNVC: 2
F300 0T 013 0694: RNCC: 6 | RNVC: 9

8 Oct 1997

5975-14-278-4699
Stuffing Tube

142784699
M208-21070: RNCC: 3 | RNVC: 2

1 Jan 1971

5975-14-405-1015
Cable Marker Sleeve

144051015
362004-01REPR: RNCC: 3 | RNVC: 2
M27BLANCREPR: RNCC: 5 | RNVC: 2

20 Nov 1985

5975-14-377-6315
Metallic Raceway

143776315
366A61-3420-2001: RNCC: 3 | RNVC: 2

7 Mar 1996

5975-14-383-9508
Cable Marker Sleeve

143839508
78-15CXZ5S30LAB156JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ5S30LAB156J: RNCC: 5 | RNVC: 2
78-15CXZ5S30JLAB156: RNCC: 5 | RNVC: 2

4 May 1983

5975-14-404-8348
Cable Marker Sleeve

144048348
29747444: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-517-4687
Stuffing Tube

145174687
091699: RNCC: 3 | RNVC: 2
3245060916992: RNCC: 5 | RNVC: 2
91699: RNCC: 5 | RNVC: 2

15 Dec 1999

5975-33-001-4760
Chassis Base

330014760
92026789: RNCC: 3 | RNVC: 2

14 Nov 1989

5975-14-345-6903
Switch Box Case

143456903
120BA01Y: RNCC: 3 | RNVC: 2

5 Oct 1977

5975-14-477-9077
Interconnecting Box

144779077
792TS03Y1002: RNCC: 3 | RNVC: 2

2 Oct 1995

5975-14-460-3323
Junction Box

144603323
318884: RNCC: 3 | RNVC: 2
318884: RNCC: 5 | RNVC: 9

21 Jan 1993

5975-14-380-3178
Cable Marker Sleeve

143803178
C63810: RNCC: 3 | RNVC: 2

8 Nov 1982

5975-14-546-0629
Nonmetallic Raceway

145460629
64520: RNCC: 3 | RNVC: 2
AA016493: RNCC: 6 | RNVC: 9

8 Jun 2005

5975-14-522-6894
Stuffing Tube

145226894
J0I016PP000: RNCC: 3 | RNVC: 2
CAE01261: RNCC: 5 | RNVC: 2

15 Nov 2000

5975-14-539-3562
Metallic Raceway

145393562
AL100066: RNCC: 3 | RNVC: 2

7 Jan 2004

5975-14-554-5965
Cable Marker Sleeve

145545965
0084301100: RNCC: 3 | RNVC: 2

23 Jul 2007

5975-27-050-7971
Stuffing Tube

270507971
TK-04-1200509: RNCC: 2 | RNVC: 1

27 Aug 2010

5975-14-289-7351
Interior Cable Rack

142897351
48-631-06-01: RNCC: 3 | RNVC: 2

1 Jan 1972

5975-14-550-6627
Junction Box

145506627
140-058XMS0001: RNCC: 3 | RNVC: 9

6 Jul 2006

5975-14-395-0734
Cable Marker Sleeve

143950734
D51900-14: RNCC: 3 | RNVC: 2
D51900-14: RNCC: 5 | RNVC: 2

2 Oct 1984

5975-14-324-4500
Junction Box

143244500
121E63-451-10-0M1: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-33-002-2073
Junction Box Cover

330022073
920.403.02-01: RNCC: 3 | RNVC: 2

23 Aug 1993

5975-14-218-6071
Stuffing Tube

142186071
253-5M661P119: RNCC: 3 | RNVC: 9
PA253-5M661P119: RNCC: 5 | RNVC: 9

1 Jan 1965

5975-14-455-5277
Stuffing Tube

144555277
PCV3-Y25: RNCC: 3 | RNVC: 2
10221699: RNCC: 5 | RNVC: 2

26 May 1992

5975-14-350-5096
Metallic Raceway

143505096
32292: RNCC: 3 | RNVC: 2

12 Jul 1978

5975-14-453-5763
Cable Marker Sleeve

144535763
BAZ9442: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-357-8568
Cable Marker Sleeve

143578568
3511 131 32381: RNCC: 3 | RNVC: 2
3511-131-32381: RNCC: 5 | RNVC: 2

20 Jul 1979

5975-14-330-1410
Fanning Strip

143301410
A519-99: RNCC: 3 | RNVC: 2

5 Apr 2001

5975-14-509-8740
Interconnecting Box

145098740
JBC1-13-01: RNCC: 3 | RNVC: 2
5975AA1075390: RNCC: 6 | RNVC: 9

4 Nov 1998

5975-14-473-9374
Cable Marker Sleeve

144739374
03520011004-: RNCC: 3 | RNVC: 2
3597470262825: RNCC: 5 | RNVC: 2
782112009443: RNCC: 5 | RNVC: 2
352011SYMBM: RNCC: 5 | RNVC: 2
352011REP-: RNCC: 5 | RNVC: 2
782112009443: RNCC: 5 | RNVC: 9

18 Jan 1995

5975-14-504-6204
Nonmetallic Raceway

145046204
21008: RNCC: 3 | RNVC: 9

25 Feb 1998

5975-14-457-8586
Access Cover

144578586
T391AB15: RNCC: 3 | RNVC: 2
5046367: RNCC: 5 | RNVC: 9
T391AB15: RNCC: 5 | RNVC: 9

24 Sep 1992

5975-14-464-5182
Metallic Raceway

144645182
ST406M52G107: RNCC: 3 | RNVC: 2

4 Aug 1993

5975-14-362-6092
Cable Marker Sleeve

143626092
360110REPP: RNCC: 3 | RNVC: 2
V65REPP: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-505-9440
Metallic Raceway

145059440
HFLGPR630AINDA: RNCC: 3 | RNVC: 2

30 Mar 1998

5975-14-268-0111
Stuffing Tube

142680111
823D66PV2: RNCC: 2 | RNVC: 2
5975BA-PV2: RNCC: 5 | RNVC: 2

1 Jan 1970

5975-14-300-3197
Fanning Strip

143003197
15146198: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-418-0325
Conduit Outlet

144180325
3316716K: RNCC: 3 | RNVC: 2
0026797A: RNCC: 5 | RNVC: 2

6 Aug 1987

5975-27-041-4289
Nonmetallic Raceway

270414289
320 17: RNCC: 5 | RNVC: 9

22 May 2008

5975-14-391-2411
Cable Marker Sleeve

143912411
036200110035: RNCC: 3 | RNVC: 2
H012-4VR5: RNCC: 5 | RNVC: 2
3597470141946: RNCC: 5 | RNVC: 2
362001-03REP5: RNCC: 5 | RNVC: 2
362011REP5: RNCC: 5 | RNVC: 2

1 Mar 1984

5975-14-346-7142
Stuffing Tube

143467142
A01401-04-1200P011: RNCC: 3 | RNVC: 2

12 Dec 1977

5975-14-464-2317
Interconnecting Box

144642317
620-867-936-0: RNCC: 3 | RNVC: 2

28 Jul 1993

5975-14-466-0710
Cable Marker Sleeve

144660710
PR285-48302: RNCC: 3 | RNVC: 2

27 Oct 1993

5975-14-331-0820
Push Button

143310820
LUF44F3550-17824AV1: RNCC: 3 | RNVC: 2
17824AV1: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-14-300-3191
Fanning Strip

143003191
15143710: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-440-4918
Cable Marker Sleeve

144404918
20130398: RNCC: 3 | RNVC: 2
20130398: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-447-3568
Stuffing Tube

144473568
090100: RNCC: 3 | RNVC: 2
91711120: RNCC: 5 | RNVC: 2
1025-090100: RNCC: 5 | RNVC: 2

15 May 1991

5975-33-106-6265
Interconnecting Box

331066265
M063509-01: RNCC: 3 | RNVC: 2

30 Nov 1998

5975-14-531-7934
Interconnecting Box

145317934
E69303100001: RNCC: 3 | RNVC: 2

18 Sep 2002

5975-14-541-4839
Cable Marker Sleeve

145414839
88179-2153: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-409-0354
Cable Marker Sleeve

144090354
P10-3-2JOW: RNCC: 3 | RNVC: 2
P10-3-2JORWNR: RNCC: 5 | RNVC: 2
12450697-5: RNCC: 5 | RNVC: 2

16 Apr 1986

5975-14-499-5091
Cable Marker Sleeve

144995091
H050W: RNCC: 3 | RNVC: 2
H050-W: RNCC: 3 | RNVC: 2
F300 0T 023 0313: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-344-2705
Junction Box

143442705
306192: RNCC: 3 | RNVC: 2

10 Aug 1977

5975-14-504-1099
Cable Marker Sleeve

145041099
39255753: RNCC: 3 | RNVC: 2

6 Feb 1998

5975-14-548-2552
Blank Panel

145482552
F1262674: RNCC: 3 | RNVC: 2

16 Dec 2005

5975-27-019-3985
Cable Marker Sleeve

270193985
10091MN0001: RNCC: 2 | RNVC: 1

15 Nov 2003

5975-14-205-9902
Push Button

142059902
2228-53-48-00-18: RNCC: 3 | RNVC: 2

1 Jan 1964

5975-14-508-7230
Conduit Outlet

145087230
OCTI3-98: RNCC: 3 | RNVC: 2

29 Sep 1998

5975-14-383-0122
Metallic Raceway

143830122
4770202230: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-286-6064
Guy

142866064
16041835: RNCC: 3 | RNVC: 2
16041835: RNCC: 5 | RNVC: 2
16041835: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-33-200-7342
Fanning Strip

332007342
394 51: RNCC: 3 | RNVC: 2

5 Mar 2002

5975-14-397-6370
Rigid Metal Conduit

143976370
485808: RNCC: 3 | RNVC: 2

14 Dec 1984

5975-14-531-0546
Cable Marker Sleeve

145310546
F00143569: RNCC: 3 | RNVC: 2

23 Jul 2002

5975-14-428-6157
Blank Panel

144286157
GC9412: RNCC: 3 | RNVC: 2

8 Dec 1988

5975-14-266-8035
Pothead

142668035
D101: RNCC: 3 | RNVC: 2

1 Jan 1970

5975-14-529-2715
Cable Marker Sleeve

145292715
03520011004A: RNCC: 3 | RNVC: 2
352011REPA: RNCC: 5 | RNVC: 2

20 Mar 2002

5975-15-207-0980
Ground Rod

152070980
958090727: RNCC: 3 | RNVC: 2
(241)A5009958090727: RNCC: 5 | RNVC: 2

3 Sep 2012

5975-14-418-7686
Guy

144187686
007322990G: RNCC: 3 | RNVC: 2
007323990N: RNCC: 5 | RNVC: 2

16 Sep 1987

5975-14-402-1159
Cable Marker Sleeve

144021159
401786: RNCC: 3 | RNVC: 2
BGE401786: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-356-9189
Cable Marker Sleeve

143569189
036002030061: RNCC: 3 | RNVC: 2
3597470040492: RNCC: 5 | RNVC: 2
360103REP1: RNCC: 5 | RNVC: 2
360203REP1: RNCC: 5 | RNVC: 2
V16MARR0NREP1: RNCC: 5 | RNVC: 2
V16REP1: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-404-8458
Cable Marker Sleeve

144048458
29747560: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-33-004-1833
Pothead

330041833
W267156543212: RNCC: 3 | RNVC: 2

2 Sep 1998

5975-14-453-5765
Cable Marker Sleeve

144535765
BAZ9444: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-319-7228
Junction Box Cover

143197228
0177040060: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-522-7089
Cable Marker Sleeve

145227089
F00145994: RNCC: 3 | RNVC: 2

15 Nov 2000

5975-14-370-7285
Rigid Metal Conduit

143707285
208134: RNCC: 3 | RNVC: 2

5 Jun 1981

5975-14-356-9378
Cable Marker Sleeve

143569378
03600109015A: RNCC: 3 | RNVC: 2
3597470038550: RNCC: 5 | RNVC: 2
360109REPA: RNCC: 5 | RNVC: 2
V60REPA: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-384-4030
Cable Marker Sleeve

143844030
03620006001TER: RNCC: 3 | RNVC: 2
H060-6BATERRE: RNCC: 3 | RNVC: 2
3597470046043: RNCC: 5 | RNVC: 2
362006-SYMBTERRE: RNCC: 5 | RNVC: 2
362006SYMBTERRE: RNCC: 5 | RNVC: 2
M40BLANCREPTERRE: RNCC: 5 | RNVC: 2

4 May 1983

5975-14-516-0813
Metallic Raceway

145160813
MC2531F00: RNCC: 3 | RNVC: 2

8 Sep 1999

5975-14-402-1067
Cable Marker Sleeve

144021067
401576: RNCC: 3 | RNVC: 2
BGE401576: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-33-209-3326
Junction Box

332093326
INS003002010020000: RNCC: 3 | RNVC: 2

6 Oct 2011

5975-15-203-2080
Cable Marker Sleeve

152032080
A578A04-9: RNCC: 3 | RNVC: 2
(241)A0126A578A04-9: RNCC: 5 | RNVC: 2

28 Nov 2007

5975-14-321-8750
Chassis Base

143218750
413-00244-003: RNCC: 3 | RNVC: 2
413-00244-003: RNCC: 5 | RNVC: 2
413-0244A: RNCC: 5 | RNVC: 2
85-660-0600: RNCC: 6 | RNVC: 9

1 Jan 1975

5975-14-386-4791
Cable Marker Sleeve

143864791
320-048-101-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5975-14-282-5330
Cable Marker Sleeve

142825330
9131503: RNCC: 3 | RNVC: 2
9131503: RNCC: 5 | RNVC: 9

1 Jan 1971

5975-14-525-7184
Interconnecting Box

145257184
20 244 020 3250: RNCC: 3 | RNVC: 2
596289: RNCC: 3 | RNVC: 2

14 Jun 2001

5975-14-453-5810
Cable Marker Sleeve

144535810
BAZ11734: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-456-6435
Metallic Raceway

144566435
BXLO000ACH001F8LG300MM: RNCC: 3 | RNVC: 2

16 Jul 1992

5975-14-370-6228
Junction Box

143706228
721886: RNCC: 3 | RNVC: 2

18 May 1981

5975-14-438-4901
Cable Hanger

144384901
332A61-5133-00: RNCC: 3 | RNVC: 2

21 Mar 1990

5975-14-483-4158
Metallic Raceway

144834158
511ST0002-11: RNCC: 3 | RNVC: 2

12 Sep 1996

5975-15-131-6057
Cable Collar

151316057
6726: RNCC: 3 | RNVC: 2

9 Oct 1996

5975-14-404-8383
Cable Marker Sleeve

144048383
29747483: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-470-9800
Switch Box Case

144709800
405330: RNCC: 3 | RNVC: 9

20 Jul 1994

5975-15-153-3874
Blank Panel

151533874
5137-302-02: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-14-379-3803
Push Button

143793803
NO PRIMARY REF14-379-3803: RNCC: 3 | RNVC: 2
345-06930-0: RNCC: 5 | RNVC: 9
345069300: RNCC: 5 | RNVC: 9

1 Oct 1982

5975-14-238-2716
Cable Marker Sleeve

142382716
352004REP5: RNCC: 3 | RNVC: 2
99008782: RNCC: 3 | RNVC: 2
HELAVIATWIN3REP5: RNCC: 5 | RNVC: 2
RAR4634: RNCC: 5 | RNVC: 2
99008782: RNCC: 5 | RNVC: 2
352-04REP5: RNCC: 5 | RNVC: 2
99008782: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-517-7341
Cable Marker Sleeve

145177341
320-314-401-0: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-15-156-8272
Access Hole Frame

151568272
RGS K 2: RNCC: 3 | RNVC: 2

7 Mar 2000

5975-14-402-6440
Nonmetallic Raceway

144026440
G0120X60C: RNCC: 3 | RNVC: 2

19 Jul 1985

5975-14-555-7857
Cable Marker Sleeve

145557857
0084102500: RNCC: 3 | RNVC: 2

14 Dec 2007

5975-14-325-3715
Stuffing Tube

143253715
511EL0034: RNCC: 3 | RNVC: 2
511EL034: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-316-2494
Chassis Base

143162494
106833: RNCC: 3 | RNVC: 2
106833: RNCC: 5 | RNVC: 2

1 Jan 1975

5975-33-004-2652
Chassis Base

330042652
730096204: RNCC: 3 | RNVC: 2

12 Nov 1998

5975-14-404-8437
Cable Marker Sleeve

144048437
29747539: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-442-6772
Cable Marker Sleeve

144426772
620-867-069-0: RNCC: 3 | RNVC: 2

24 Oct 1990

5975-14-482-4582
Cable Hanger

144824582
78765A040-022: RNCC: 3 | RNVC: 2

11 Jul 1996

5975-14-466-0732
Cable Marker Sleeve

144660732
PR48302-775: RNCC: 3 | RNVC: 2
PR48302-775: RNCC: 5 | RNVC: 2

27 Oct 1993

5975-14-468-6311
Stuffing Tube

144686311
431307: RNCC: 3 | RNVC: 2
RAB2931: RNCC: 5 | RNVC: 2

14 Mar 1994

5975-14-404-7322
Cable Marker Sleeve

144047322
39210521: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-331-8131
Guy

143318131
MANJ60-178-3: RNCC: 3 | RNVC: 2
MAHJ63: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-463-9645
Cable Marker Sleeve

144639645
620-867-463-0: RNCC: 3 | RNVC: 2

7 Jul 1993

5975-27-059-4435
Cable Collar

270594435
98013845: RNCC: 2 | RNVC: 1

5 Aug 2013

5975-14-533-2821
Metallic Raceway

145332821
204063: RNCC: 3 | RNVC: 2

29 Jan 2003

5975-14-352-7873
Push Button

143527873
300111: RNCC: 3 | RNVC: 2
300111: RNCC: 5 | RNVC: 2

14 Nov 1978

5975-14-525-5440
Switch Box Case

145255440
5645019J00: RNCC: 3 | RNVC: 2
SYB3293: RNCC: 5 | RNVC: 2

13 Jun 2001

5975-27-042-3721
Nonmetallic Raceway

270423721
40X16 MM: RNCC: 5 | RNVC: 9
40X16 MM: RNCC: 5 | RNVC: 9
40X16 MM: RNCC: 5 | RNVC: 9

12 Aug 2008

5975-14-356-9284
Cable Marker Sleeve

143569284
03600106015O: RNCC: 3 | RNVC: 2
3597470037430: RNCC: 5 | RNVC: 2
360106LETTRE0: RNCC: 5 | RNVC: 2
360106LETTREO: RNCC: 5 | RNVC: 2
V37REP0: RNCC: 5 | RNVC: 2

15 May 1979

5975-27-041-1546
Nonmetallic Raceway

270411546
5975-TJ1-08867: RNCC: 2 | RNVC: 1

2 May 2008

5975-33-161-6878
Conduit Outlet

331616878
31712-31: RNCC: 3 | RNVC: 2

20 Jul 1995

5975-14-356-9299
Cable Marker Sleeve

143569299
036002070053: RNCC: 3 | RNVC: 2
360106REP3: RNCC: 5 | RNVC: 2
360207REP3: RNCC: 5 | RNVC: 2
V37-0RANGEREP3: RNCC: 5 | RNVC: 2
3597470040881: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-404-8373
Cable Marker Sleeve

144048373
29747473: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-396-7562
Cable Marker Sleeve

143967562
20316535: RNCC: 3 | RNVC: 2

27 Nov 1984

Load More Results