What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 121 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 121of 491

5975-14-428-2354
Junction Box Cover

144282354
4-018-0105: RNCC: 3 | RNVC: 2

8 Dec 1988

5975-14-535-0326
Raceway Cover

145350326
NO PRIMARY REF14-535-0326: RNCC: 3 | RNVC: 2
0120021: RNCC: 5 | RNVC: 9
SC086624: RNCC: 6 | RNVC: 9

30 Apr 2003

5975-14-402-4091
Cable Marker Sleeve

144024091
01PR0TMS4W3-16: RNCC: 1 | RNVC: 2
TMS3-16NR13U9: RNCC: 3 | RNVC: 2
HS048WE4DSU: RNCC: 5 | RNVC: 2
TMS3-16NR13U9: RNCC: 5 | RNVC: 9
TMSSCE2X3-16S3-9: RNCC: 5 | RNVC: 9

3 Jul 1985

5975-14-483-5114
Cable Crosshead

144835114
1780311: RNCC: 3 | RNVC: 2
5970-65-0000001: RNCC: 6 | RNVC: 9

18 Sep 1996

5975-14-331-5420
Junction Box

143315420
GSM152-001 F4 A F11: RNCC: 3 | RNVC: 2
A0448-001: RNCC: 5 | RNVC: 2
GSM152-001: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-316-4615
Interior Cable Rack

143164615
BN418-501F05C: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-259-6909
Junction Box

142596909
309141: RNCC: 3 | RNVC: 2

1 Jan 1969

5975-14-454-7226
Stuffing Tube

144547226
632902: RNCC: 3 | RNVC: 2

9 Apr 1992

5975-14-438-4843
Cable Hanger

144384843
332A61-2301-20: RNCC: 3 | RNVC: 2

21 Mar 1990

5975-14-429-2010
Ground Rod

144292010
02STAKE: RNCC: 3 | RNVC: 2
02-STAKE: RNCC: 5 | RNVC: 2

11 Jan 1989

5975-14-387-9181
Push Button

143879181
V11AA07Z1XB1: RNCC: 3 | RNVC: 9
BA14119: RNCC: 5 | RNVC: 2
C21AA04230E10: RNCC: 5 | RNVC: 9

12 Oct 1983

5975-14-363-9971
Junction Box Cover

143639971
121A64-142-15-0: RNCC: 3 | RNVC: 2

7 Aug 1980

5975-14-365-0252
Conduit Outlet

143650252
14461: RNCC: 3 | RNVC: 2

2 Sep 1980

5975-14-464-3357
Metallic Raceway

144643357
ST406M52G105: RNCC: 3 | RNVC: 2

28 Jul 1993

5975-14-454-6649
Junction Box Cover

144546649
T20-13D503: RNCC: 3 | RNVC: 2

9 Apr 1992

5975-14-433-1241
Cable Marker Sleeve

144331241
352012-10: RNCC: 3 | RNVC: 2

11 Jul 1989

5975-14-445-0325
Cable Marker Sleeve

144450325
1-058: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-395-5805
Push Button

143955805
5-1881B43152-481: RNCC: 3 | RNVC: 2

30 Oct 1984

5975-14-238-2814
Cable Marker Sleeve

142382814
03520006004H: RNCC: 3 | RNVC: 2
99026329: RNCC: 5 | RNVC: 2
HELAVIATWIN5REPH: RNCC: 5 | RNVC: 2
352006REPH: RNCC: 5 | RNVC: 2
99026329: RNCC: 5 | RNVC: 9
99026329: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-416-7278
Cable Marker Sleeve

144167278
HT20-25BASTB0: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-27-041-8186
Raceway Elbow

270418186
L -100X50: RNCC: 2 | RNVC: 1

20 Jun 2008

5975-14-513-9300
Cable Marker Sleeve

145139300
2702-391A544: RNCC: 3 | RNVC: 2

19 Apr 1999

5975-14-396-0876
Cable Collar

143960876
206223: RNCC: 3 | RNVC: 2

27 Nov 1984

5975-33-202-6950
Interconnecting Box

332026950
9673.590.5076: RNCC: 3 | RNVC: 2
2510903197: RNCC: 5 | RNVC: 2
2510903197: RNCC: 5 | RNVC: 2

26 Sep 2003

5975-14-465-0468
Cable Marker Sleeve

144650468
39457379: RNCC: 3 | RNVC: 2
39457379: RNCC: 3 | RNVC: 9

8 Sep 1993

5975-14-254-1139
Cable Marker Sleeve

142541139
03520003004Q: RNCC: 3 | RNVC: 2
91310055: RNCC: 5 | RNVC: 2
HELAVIATWIN2REPQ: RNCC: 5 | RNVC: 2
352003REPQ: RNCC: 5 | RNVC: 2
91310055: RNCC: 5 | RNVC: 9
91310055: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-416-7261
Cable Marker Sleeve

144167261
HT15-25BA11-092: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-520-5972
Junction Box

145205972
R06007-05-6000: RNCC: 3 | RNVC: 2

24 May 2000

5975-14-270-9103
Cable Marker Sleeve

142709103
204336-1325A: RNCC: 3 | RNVC: 2
7815CXZ7S30KD1325AJ: RNCC: 5 | RNVC: 9

1 Jan 1970

5975-14-338-6656
Junction Box Cover

143386656
163059: RNCC: 3 | RNVC: 2

17 Dec 1976

5975-14-445-0401
Cable Marker Sleeve

144450401
2-062: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-15-149-2787
Cable Collar

151492787
C64393: RNCC: 3 | RNVC: 2

25 Mar 1999

5975-14-485-2306
Raceway Elbow

144852306
599059: RNCC: 3 | RNVC: 2
599059: RNCC: 5 | RNVC: 2
599059: RNCC: 5 | RNVC: 2

13 Jan 1997

5975-33-200-4119
Cable Marker Sleeve

332004119
Q 314 196 572: RNCC: 3 | RNVC: 2

22 Jan 2002

5975-14-429-5825
Guy Set

144295825
35115: RNCC: 3 | RNVC: 2
PL35115: RNCC: 5 | RNVC: 2

1 Feb 1989

5975-14-404-7223
Cable Marker Sleeve

144047223
20781446: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-523-3904
Cable Marker Sleeve

145233904
0264701790: RNCC: 3 | RNVC: 2

17 Jan 2001

5975-33-126-3951
Ground Rod

331263951
68.001: RNCC: 3 | RNVC: 2

20 Jul 1995

5975-14-300-3484
Stuffing Tube

143003484
R191941: RNCC: 3 | RNVC: 2
R20900: RNCC: 5 | RNVC: 2

1 Jan 1973

5975-27-009-9188
Junction Box Cover

270099188
98011088: RNCC: 2 | RNVC: 1

9 Oct 2001

5975-14-404-7230
Cable Marker Sleeve

144047230
20781788: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-485-8719
Interconnecting Box

144858719
ALZ050056030004: RNCC: 3 | RNVC: 2

19 Feb 1997

5975-14-526-8323
Interconnecting Box

145268323
5010492739: RNCC: 3 | RNVC: 2

7 Sep 2001

5975-27-028-0057
Metallic Raceway

270280057
105X42X1.5 MM: RNCC: 5 | RNVC: 2

25 Nov 2005

5975-14-416-7290
Cable Marker Sleeve

144167290
HT20-25BA12-024: RNCC: 3 | RNVC: 2
2-024: RNCC: 5 | RNVC: 2

25 Jun 1987

5975-14-471-4782
Cable Marker Sleeve

144714782
1361: RNCC: 3 | RNVC: 2

31 Aug 1994

5975-14-442-9110
Chassis Base

144429110
20213119: RNCC: 3 | RNVC: 2
20213119: RNCC: 5 | RNVC: 9

7 Nov 1990

5975-15-109-3781
Cable Collar

151093781
5145-218-00: RNCC: 3 | RNVC: 2

20 Sep 1991

5975-14-546-1382
Raceway Elbow

145461382
01731: RNCC: 3 | RNVC: 2
NIAV 150X60 W0: RNCC: 5 | RNVC: 2
AA016618: RNCC: 6 | RNVC: 9

14 Jun 2005

5975-14-356-9348
Cable Marker Sleeve

143569348
03600108015G: RNCC: 3 | RNVC: 2
3597470038222: RNCC: 5 | RNVC: 2
360108REPG: RNCC: 5 | RNVC: 2
V50REPG: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-396-5853
Conduit Outlet

143965853
4410: RNCC: 3 | RNVC: 2

27 Nov 1984

5975-14-506-9322
Cable Marker Sleeve

145069322
SILAVIAA0: RNCC: 3 | RNVC: 2

27 May 1998

5975-14-420-7528
Cable Marker Sleeve

144207528
ST400S58P202-053: RNCC: 3 | RNVC: 2
2-053: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-384-3595
Push Button

143843595
BMC1-1-028N: RNCC: 3 | RNVC: 9

4 May 1983

5975-14-506-9684
Raceway Cover

145069684
030310: RNCC: 3 | RNVC: 2
303-10: RNCC: 5 | RNVC: 2
30310: RNCC: 5 | RNVC: 2
3245060303105: RNCC: 5 | RNVC: 2
5226190: RNCC: 5 | RNVC: 9
LG30310: RNCC: 5 | RNVC: 9

27 May 1998

5975-14-457-7414
Conduit Outlet

144577414
70509: RNCC: 3 | RNVC: 2

17 Sep 1992

5975-14-481-8693
Chassis Base

144818693
02704: RNCC: 3 | RNVC: 2
3303430027041: RNCC: 5 | RNVC: 2

6 Jun 1996

5975-33-107-4284
Interconnecting Box

331074284
W290683115800: RNCC: 3 | RNVC: 2

14 Oct 1999

5975-14-537-5656
Cable Marker Sleeve

145375656
735220-7: RNCC: 3 | RNVC: 2

5 Nov 2003

5975-14-472-3335
Interior Cable Rack

144723335
HB1/28X24X2: RNCC: 3 | RNVC: 2

19 Oct 1994

5975-14-554-7813
Stuffing Tube

145547813
601674: RNCC: 3 | RNVC: 2

22 Aug 2007

5975-14-483-2708
Insulator Pin

144832708
4GM000618: RNCC: 3 | RNVC: 2
4MC801563: RNCC: 5 | RNVC: 2
91399714: RNCC: 5 | RNVC: 2
4GM000618: RNCC: 5 | RNVC: 9

29 Aug 1996

5975-14-471-6156
Cable Hanger

144716156
2015353E: RNCC: 3 | RNVC: 2

7 Sep 1994

5975-14-372-2332
Ground Rod

143722332
D1099: RNCC: 3 | RNVC: 2

1 Sep 1981

5975-14-366-7465
Pothead

143667465
18863: RNCC: 3 | RNVC: 2

20 Nov 1980

5975-15-119-0754
Cable Collar

151190754
70927202: RNCC: 3 | RNVC: 2

4 Jul 1994

5975-14-356-9210
Cable Marker Sleeve

143569210
03600104015M: RNCC: 3 | RNVC: 2
3597470036525: RNCC: 5 | RNVC: 2
360104REPM: RNCC: 5 | RNVC: 2
V22REPM: RNCC: 5 | RNVC: 2

15 May 1979

5975-33-103-5221
Conduit Outlet

331035221
4052: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-14-402-5892
Cable Marker Sleeve

144025892
401571: RNCC: 3 | RNVC: 2
BGE401571: RNCC: 5 | RNVC: 2

19 Jul 1985

5975-14-278-3613
Junction Box Cover

142783613
160-79333: RNCC: 3 | RNVC: 2

1 Jan 1971

5975-14-481-7311
Stuffing Tube

144817311
222000: RNCC: 3 | RNVC: 2

30 May 1996

5975-15-200-3092
Cable Marker Sleeve

152003092
T0003759: RNCC: 3 | RNVC: 2
47983A107930: RNCC: 5 | RNVC: 2

29 Nov 2005

5975-14-262-1214
Push Button

142621214
1001R0UGE: RNCC: 3 | RNVC: 2
1001-2: RNCC: 5 | RNVC: 2

1 Jan 1970

5975-14-505-1333
Metallic Raceway

145051333
22001: RNCC: 3 | RNVC: 2

11 Mar 1998

5975-14-523-2041
Blank Panel

145232041
40162109: RNCC: 3 | RNVC: 2
40162109: RNCC: 5 | RNVC: 2

10 Jan 2001

5975-14-545-8418
Stuffing Tube

145458418
1368525: RNCC: 3 | RNVC: 9

19 May 2005

5975-14-413-2470
Blank Panel

144132470
3154049: RNCC: 3 | RNVC: 2

26 Nov 1986

5975-14-285-0157
Stuffing Tube

142850157
1367476: RNCC: 3 | RNVC: 2
3102134: RNCC: 5 | RNVC: 2

1 Jan 1972

5975-27-049-1682
Guide Rail

270491682
MP002712: RNCC: 2 | RNVC: 1

8 Apr 2010

5975-14-477-9569
Junction Box

144779569
1109049A00: RNCC: 3 | RNVC: 2

4 Oct 1995

5975-14-278-5097
Chassis Base

142785097
V1509-1: RNCC: 3 | RNVC: 2
309520: RNCC: 5 | RNVC: 2
104000: RNCC: 5 | RNVC: 2
V1509-1: RNCC: 5 | RNVC: 2
SP-224A: RNCC: 6 | RNVC: 9

1 Jan 1971

5975-14-447-1296
Cable Marker Sleeve

144471296
620-867-057-0: RNCC: 3 | RNVC: 2

3 May 1991

5975-14-238-2669
Cable Marker Sleeve

142382669
352002REPT: RNCC: 3 | RNVC: 2
99042444: RNCC: 5 | RNVC: 2
HELAVIATWIN1REPT: RNCC: 5 | RNVC: 2
99042444: RNCC: 5 | RNVC: 9
99042444: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-404-7160
Cable Marker Sleeve

144047160
20780681: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-421-0077
Switch Box Case

144210077
39233098: RNCC: 3 | RNVC: 2
39233098: RNCC: 5 | RNVC: 9

6 Jan 1988

5975-14-299-0937
Rigid Metal Conduit

142990937
121E63-365-01-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-552-1387
Guide Rail

145521387
01210010110-0217: RNCC: 3 | RNVC: 2
012100101100217: RNCC: 5 | RNVC: 2
9550852460: RNCC: 5 | RNVC: 2

28 Nov 2006

5975-14-454-0764
Chassis Base

144540764
16214825: RNCC: 3 | RNVC: 2

19 Mar 1992

5975-14-340-8251
Stuffing Tube

143408251
SQ1-03-08VARA: RNCC: 3 | RNVC: 2

14 Feb 1977

5975-14-426-9323
Guy

144269323
75729: RNCC: 3 | RNVC: 2
PL75529: RNCC: 5 | RNVC: 2
91614907: RNCC: 5 | RNVC: 2

29 Sep 1988

5975-14-487-1201
Junction Box

144871201
024852: RNCC: 3 | RNVC: 2
24852: RNCC: 5 | RNVC: 2
3245060248529: RNCC: 5 | RNVC: 2

10 Apr 1997

5975-14-418-5701
Cable Hanger

144185701
31731098: RNCC: 3 | RNVC: 9

2 Sep 1987

5975-14-408-0731
Junction Box

144080731
71806: RNCC: 3 | RNVC: 2

19 Mar 1986

5975-14-529-3942
Stuffing Tube

145293942
1209290115: RNCC: 3 | RNVC: 2

29 Mar 2002

5975-14-254-1119
Cable Marker Sleeve

142541119
352001REPZ: RNCC: 3 | RNVC: 2
HELAVIATWIN0REPZ: RNCC: 5 | RNVC: 2

1 Jan 1969

5975-14-425-4621
Cable Marker Sleeve

144254621
20130261: RNCC: 3 | RNVC: 2
20130261: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-14-336-5054
Interior Cable Rack

143365054
GF64: RNCC: 3 | RNVC: 2

14 Aug 1976

5975-14-457-6885
Cable Collar

144576885
1-00400200: RNCC: 3 | RNVC: 2

15 Sep 1992

5975-14-238-2251
Cable Marker Sleeve

142382251
352002REP1: RNCC: 3 | RNVC: 2
99022952: RNCC: 3 | RNVC: 2
99022952: RNCC: 5 | RNVC: 2
352002-01: RNCC: 5 | RNVC: 2
HELAVIATWIN1REP1: RNCC: 5 | RNVC: 2
99022952: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-369-3681
Ground Rod

143693681
TP2010: RNCC: 3 | RNVC: 2

17 Apr 1981

5975-33-103-5226
Conduit Outlet

331035226
5001-3: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-14-380-3181
Cable Marker Sleeve

143803181
C63811-1: RNCC: 3 | RNVC: 2

8 Nov 1982

5975-14-287-0735
Cable Marker Sleeve

142870735
MGCM3BA10-8: RNCC: 3 | RNVC: 2
9554819080: RNCC: 5 | RNVC: 2
MGCM3BA10-8: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-509-1130
Cable Marker Sleeve

145091130
10343362: RNCC: 3 | RNVC: 2
212-025N: RNCC: 5 | RNVC: 9

21 Oct 1998

5975-14-466-0708
Cable Marker Sleeve

144660708
PR283-48302: RNCC: 3 | RNVC: 2

27 Oct 1993

5975-14-254-5685
Junction Box

142545685
92106: RNCC: 3 | RNVC: 2
304-6790: RNCC: 5 | RNVC: 2
0614624: RNCC: 5 | RNVC: 2
M4ZS560D4654: RNCC: 5 | RNVC: 2
M4ZS460D8621A: RNCC: 5 | RNVC: 2
LG92106: RNCC: 5 | RNVC: 9
5315122: RNCC: 5 | RNVC: 9
614624: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-499-4353
Cable Marker Sleeve

144994353
5600023-060246-000-0-11: RNCC: 3 | RNVC: 2
5600023-060246.000.0-11: RNCC: 5 | RNVC: 2
F300 0T 022 0891: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-376-1596
Push Button

143761596
8740-41020: RNCC: 3 | RNVC: 2
8740-41020: RNCC: 5 | RNVC: 9
874041020: RNCC: 5 | RNVC: 9
85-691-7542: RNCC: 6 | RNVC: 9
85-691-7657: RNCC: 6 | RNVC: 9

30 Mar 1982

5975-27-034-1149
Metallic Raceway

270341149
200MM: RNCC: 2 | RNVC: 1

12 Dec 2006

5975-14-508-1551
Interconnecting Box

145081551
L8570: RNCC: 3 | RNVC: 2
8900000307: RNCC: 5 | RNVC: 9

26 Aug 1998

5975-27-014-8456
Pothead

270148456
50041YB0001: RNCC: 2 | RNVC: 1

10 Dec 2002

5975-14-420-7502
Cable Marker Sleeve

144207502
ST400S58P201-253: RNCC: 3 | RNVC: 2
1-253: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-27-056-6646
Ground Rod

270566646
MM-0000-4048: RNCC: 2 | RNVC: 1

25 Apr 2012

5975-27-016-4981
Raceway Elbow

270164981
GD-20: RNCC: 2 | RNVC: 1

28 Jan 2003

5975-15-201-8392
Blank Panel

152018392
RAF-0539/01: RNCC: 3 | RNVC: 2
(241)A0069RAF-0539/01: RNCC: 5 | RNVC: 2

19 Dec 2006

5975-14-504-6520
Crossarm Brace

145046520
LS02-001-06: RNCC: 3 | RNVC: 2

25 Feb 1998

5975-14-399-7568
Rigid Metal Conduit

143997568
A48001-34BDD: RNCC: 2 | RNVC: 2

14 Mar 1985

5975-14-549-8410
Metallic Raceway

145498410
2092778: RNCC: 3 | RNVC: 2

16 May 2006

5975-14-494-4161
Raceway Cover

144944161
45281283: RNCC: 3 | RNVC: 2
45281283: RNCC: 3 | RNVC: 9
F300 0T 017 2922: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-320-7525
Cable Marker Sleeve

143207525
MGCM3BA10-31: RNCC: 3 | RNVC: 2
9550110550: RNCC: 5 | RNVC: 2
MGCM3BA10-31: RNCC: 5 | RNVC: 9

1 Jan 1975

5975-14-462-6565
Junction Box

144626565
214576: RNCC: 3 | RNVC: 2

28 Apr 1993

5975-14-527-7898
Blank Panel

145277898
30818-522: RNCC: 3 | RNVC: 2

21 Nov 2001

5975-14-317-2414
Cable Marker Sleeve

143172414
NO PRIMARY REF14-317-2414: RNCC: 3 | RNVC: 2
9560110400: RNCC: 5 | RNVC: 2
1588: RNCC: 5 | RNVC: 9
35320-2: RNCC: 5 | RNVC: 9

1 Jan 1975

5975-14-342-1368
Cable Marker Sleeve

143421368
S272237-1: RNCC: 3 | RNVC: 2
85-680-9681: RNCC: 6 | RNVC: 9

14 Apr 1977

5975-14-359-5925
Junction Box

143595925
NO PRIMARY REF14-359-5925: RNCC: 3 | RNVC: 2
50819: RNCC: 5 | RNVC: 9

15 Oct 1979

5975-14-466-0725
Cable Marker Sleeve

144660725
PR48302-640: RNCC: 3 | RNVC: 2

27 Oct 1993

5975-15-122-1153
Blank Panel

151221153
178-0112/00: RNCC: 3 | RNVC: 2

10 May 1996

5975-14-452-9731
Cable Marker Sleeve

144529731
L40200-17: RNCC: 3 | RNVC: 2

29 Jan 1992

5975-14-465-0469
Cable Marker Sleeve

144650469
39457381: RNCC: 3 | RNVC: 2
39457381: RNCC: 3 | RNVC: 9

8 Sep 1993

5975-14-356-9164
Cable Marker Sleeve

143569164
03600103015B: RNCC: 3 | RNVC: 2
3597470035948: RNCC: 5 | RNVC: 2
360103REPB: RNCC: 5 | RNVC: 2
V16REPB: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-268-0031
Stuffing Tube

142680031
823D66BVL4: RNCC: 2 | RNVC: 2
50640: RNCC: 3 | RNVC: 2

1 Jan 1970

5975-14-320-3062
Junction Box

143203062
0064777990: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-461-1635
Metallic Raceway

144611635
4772920050: RNCC: 3 | RNVC: 2
5046018: RNCC: 5 | RNVC: 9

24 Feb 1993

5975-14-496-9041
Interconnecting Box

144969041
12435601: RNCC: 3 | RNVC: 2
F300 0T 022 2537: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-279-7570
Rigid Metal Conduit

142797570
12505059: RNCC: 3 | RNVC: 2
12505059: RNCC: 3 | RNVC: 9

1 Jan 1971

5975-14-520-1822
Interconnecting Box

145201822
4625052A: RNCC: 3 | RNVC: 2

17 May 2000

5975-14-512-9429
Metallic Raceway

145129429
IBTAE120.60W: RNCC: 3 | RNVC: 2

24 Feb 1999

5975-14-251-8434
Rigid Metal Conduit

142518434
MRBPE11ADXFILETEMANCH0NNEPEINT: RNCC: 2 | RNVC: 2

1 Jan 1968

5975-14-428-8417
Interconnecting Box

144288417
20325786: RNCC: 3 | RNVC: 2
20325786: RNCC: 5 | RNVC: 9

22 Dec 1988

5975-14-465-1986
Cable Marker Sleeve

144651986
ST406M52P749: RNCC: 3 | RNVC: 2

15 Sep 1993

5975-14-238-2837
Cable Marker Sleeve

142382837
03520006004D: RNCC: 3 | RNVC: 2
99026326: RNCC: 5 | RNVC: 2
HELAVIATWIN5REPD: RNCC: 5 | RNVC: 2
352006REPD: RNCC: 5 | RNVC: 2
99026326: RNCC: 5 | RNVC: 9
99026326: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-337-6728
Conduit Outlet

143376728
70221: RNCC: 3 | RNVC: 2

6 Nov 1976

5975-33-103-5128
Metallic Raceway

331035128
1355: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-15-159-9365
Nonmetallic Raceway

151599365
CANPLCWH: RNCC: 3 | RNVC: 2
(241)AE208CANPLCWH: RNCC: 5 | RNVC: 2

15 Apr 2004

5975-14-311-5086
Stuffing Tube

143115086
PE13-5: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-543-0396
Cable Marker Sleeve

145430396
73E1Y: RNCC: 3 | RNVC: 2

18 Aug 2004

5975-14-457-6865
Cable Collar

144576865
1-00402160: RNCC: 3 | RNVC: 2

15 Sep 1992

5975-14-288-3595
Cable Marker Sleeve

142883595
2529-1-2Y: RNCC: 3 | RNVC: 2
2529-1-2Y: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-453-5742
Cable Marker Sleeve

144535742
BAZ9679: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-27-024-1767
Junction Box

270241767
2.HIBM-1E-1676: RNCC: 2 | RNVC: 1

24 Sep 2004

5975-27-059-4820
Junction Box

270594820
TN3217-12210000203017: RNCC: 5 | RNVC: 9

21 Aug 2013

5975-14-042-5172
Stuffing Tube

140425172
16688524: RNCC: 3 | RNVC: 2

27 Feb 1978

5975-14-431-1917
Cable Marker Sleeve

144311917
035200070047: RNCC: 3 | RNVC: 2
3597470259733: RNCC: 5 | RNVC: 2
352007REP7: RNCC: 5 | RNVC: 2
DLT360306: RNCC: 5 | RNVC: 2

11 Apr 1989

5975-14-410-6282
Junction Box

144106282
400479: RNCC: 3 | RNVC: 2
BGE400479: RNCC: 5 | RNVC: 2

9 Jul 1986

5975-14-434-3040
Conduit Outlet

144343040
553534: RNCC: 3 | RNVC: 2

20 Sep 1989

5975-27-042-6041
Pothead

270426041
8MM LIK: RNCC: 2 | RNVC: 1

29 Aug 2008

5975-14-358-7313
Stuffing Tube Plug

143587313
2339-242-40: RNCC: 3 | RNVC: 2
2339-242-40: RNCC: 5 | RNVC: 9

7 Sep 1979

5975-14-431-2222
Push Button

144312222
V12AF03: RNCC: 3 | RNVC: 9

12 Apr 1989

5975-14-356-9293
Cable Marker Sleeve

143569293
03600106015X: RNCC: 3 | RNVC: 2
360106REPX: RNCC: 5 | RNVC: 2
V37REPX: RNCC: 5 | RNVC: 2
3597470037577: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-530-3085
Interconnecting Box

145303085
1714100: RNCC: 3 | RNVC: 2

29 May 2002

5975-33-190-3034
Conduit Outlet

331903034
9964: RNCC: 3 | RNVC: 2

1 Aug 1995

5975-14-527-3986
Interconnecting Box

145273986
H77206H: RNCC: 3 | RNVC: 2

24 Oct 2001

5975-14-522-2225
Nonmetallic Raceway

145222225
155955: RNCC: 3 | RNVC: 2
89525705: RNCC: 3 | RNVC: 2

11 Oct 2000

5975-14-543-1518
Cable Marker Sleeve

145431518
860742: RNCC: 3 | RNVC: 9

26 Aug 2004

5975-15-158-0193
Cable Marker Sleeve

151580193
47915A126450: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-546-2903
Metallic Raceway

145462903
10642236: RNCC: 3 | RNVC: 2

22 Jun 2005

5975-27-019-4212
Cable Marker Sleeve

270194212
10091MN0010: RNCC: 2 | RNVC: 1

15 Nov 2003

5975-14-282-5694
Cable Marker Sleeve

142825694
12505542: RNCC: 3 | RNVC: 2
12505542: RNCC: 5 | RNVC: 9

1 Jan 1971

5975-14-392-8913
Metallic Raceway

143928913
573905565: RNCC: 3 | RNVC: 2

7 Apr 1984

5975-14-459-3808
Chassis Base

144593808
39958262: RNCC: 3 | RNVC: 2
39958262: RNCC: 5 | RNVC: 9

26 Nov 1992

5975-14-448-5233
Fanning Strip

144485233
07801: RNCC: 3 | RNVC: 2
3303430078012: RNCC: 5 | RNVC: 2

26 Jun 1991

5975-14-356-9218
Cable Marker Sleeve

143569218
03600104015U: RNCC: 3 | RNVC: 2
360104REPU: RNCC: 5 | RNVC: 2
V22REPU: RNCC: 5 | RNVC: 2
3597470036662: RNCC: 5 | RNVC: 2

15 May 1979

5975-15-158-0390
Cable Marker Sleeve

151580390
T0003795: RNCC: 3 | RNVC: 2
47983A109230: RNCC: 5 | RNVC: 2

15 Dec 2003

5975-14-442-9108
Chassis Base

144429108
20213117: RNCC: 3 | RNVC: 2
20213117: RNCC: 5 | RNVC: 9

7 Nov 1990

5975-15-193-2066
Blank Panel

151932066
3DB03010AAAA: RNCC: 3 | RNVC: 2

20 Apr 2010

5975-14-546-5061
Junction Box

145465061
778318: RNCC: 3 | RNVC: 2

11 Jul 2005

5975-14-467-6072
Cable Marker Sleeve

144676072
0084021040: RNCC: 3 | RNVC: 2

19 Jan 1994

5975-14-479-8789
Switch Box Case

144798789
ES028AU055A4: RNCC: 3 | RNVC: 9
95202: RNCC: 5 | RNVC: 9

12 Feb 1996

5975-14-282-5333
Cable Marker Sleeve

142825333
9131507: RNCC: 3 | RNVC: 2
9131507: RNCC: 5 | RNVC: 9

1 Jan 1971

5975-14-466-6960
Cable Marker Sleeve

144666960
520600D00: RNCC: 3 | RNVC: 2

24 Nov 1993

5975-14-554-5962
Cable Marker Sleeve

145545962
0084301070: RNCC: 3 | RNVC: 2

23 Jul 2007

5975-15-116-7186
Cable Collar

151167186
5813142 T: RNCC: 3 | RNVC: 2

23 Jun 1993

5975-14-415-9360
Cable Marker Sleeve

144159360
320-564-601-0: RNCC: 3 | RNVC: 2

26 May 1987

5975-14-404-8345
Cable Marker Sleeve

144048345
29747441: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-407-6710
Stuffing Tube

144076710
239109: RNCC: 3 | RNVC: 2

27 Feb 1986

5975-14-366-8095
Interior Cable Rack

143668095
970031: RNCC: 3 | RNVC: 2
970031: RNCC: 5 | RNVC: 9

20 Nov 1980

5975-14-448-4066
Cable Hanger

144484066
HPU12RILSAN: RNCC: 3 | RNVC: 2

26 Jun 1991

5975-14-516-5778
Stuffing Tube

145165778
1067417W01: RNCC: 3 | RNVC: 2

6 Oct 1999

5975-14-514-9077
Interconnecting Box

145149077
221790: RNCC: 3 | RNVC: 2

23 Jun 1999

5975-14-373-6103
Cable Marker Sleeve

143736103
362104REPF: RNCC: 3 | RNVC: 2
BBZ2212: RNCC: 5 | RNVC: 2

13 Nov 1981

5975-14-524-7165
Junction Box Cover

145247165
463234: RNCC: 3 | RNVC: 2

5 Apr 2001

5975-14-447-4716
Guide Rail

144474716
001751 171 00: RNCC: 3 | RNVC: 2
00175117100: RNCC: 5 | RNVC: 2

15 May 1991

5975-15-158-0242
Cable Marker Sleeve

151580242
47915A139220: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-553-4677
Cable Marker Sleeve

145534677
0084105020: RNCC: 3 | RNVC: 2

5 Apr 2007

5975-14-338-9104
Stuffing Tube

143389104
241302: RNCC: 3 | RNVC: 2
24132: RNCC: 5 | RNVC: 2
CAE00956: RNCC: 5 | RNVC: 2

17 Dec 1976

5975-14-423-3596
Junction Box Cover

144233596
160G742041: RNCC: 3 | RNVC: 2

14 Apr 1988

5975-14-363-3365
Guy Set

143633365
HLI20100: RNCC: 3 | RNVC: 2

3 Apr 1980

5975-14-331-0812
Push Button

143310812
LUF44F3550-17821AV1: RNCC: 3 | RNVC: 2
17821AV1: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-14-455-5539
Junction Box

144555539
815-1-71-000: RNCC: 3 | RNVC: 2

28 May 1992

5975-33-200-3304
Chassis Base

332003304
723571104-01: RNCC: 3 | RNVC: 2

18 Dec 2001

5975-14-383-9514
Cable Marker Sleeve

143839514
78-15CXZ5S30LAB179JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ5S30JLAB179: RNCC: 5 | RNVC: 2
78-15CXZ5S30LAB179J: RNCC: 5 | RNVC: 2
5000263199: RNCC: 5 | RNVC: 9

4 May 1983

5975-14-520-3272
Cable Marker Sleeve

145203272
TMS3-16NR13S90-9: RNCC: 3 | RNVC: 9

17 May 2000

5975-14-440-2049
Cable Marker Sleeve

144402049
035200140048: RNCC: 3 | RNVC: 2
3597470262504: RNCC: 5 | RNVC: 2
352014REP8: RNCC: 5 | RNVC: 2

11 Jul 1990

5975-14-385-5779
Conduit Outlet

143855779
6107635: RNCC: 3 | RNVC: 2

26 Jul 1983

5975-14-546-4816
Interior Cable Rack

145464816
SW14530Y: RNCC: 3 | RNVC: 2

7 Jul 2005

5975-14-419-4224
Fanning Strip

144194224
16508156: RNCC: 3 | RNVC: 2
16508156: RNCC: 5 | RNVC: 9

16 Oct 1987

5975-14-342-0059
Interior Cable Rack

143420059
D108SZ100: RNCC: 3 | RNVC: 2
D108SZ100: RNCC: 5 | RNVC: 2
D108SZ100: RNCC: 5 | RNVC: 9
101014LONG3M: RNCC: 5 | RNVC: 9
101014: RNCC: 5 | RNVC: 9

14 Apr 1977

5975-14-499-4423
Cable Marker Sleeve

144994423
5600023-060310-000-0-11: RNCC: 3 | RNVC: 2
5600023-060310.000.0-11: RNCC: 5 | RNVC: 2
F300 0T 022 0961: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-501-3306
Interconnecting Box

145013306
4300000-1: RNCC: 3 | RNVC: 2

29 Oct 1997

5975-14-483-7802
Blank Panel

144837802
511ST0038-3: RNCC: 3 | RNVC: 2

3 Oct 1996

5975-14-298-6372
Cable Marker Sleeve

142986372
01700200420: RNCC: 3 | RNVC: 2
17002-4: RNCC: 5 | RNVC: 2

1 Jan 1973

5975-14-342-8178
Junction Box Cover

143428178
EA1M601-10-820N1: RNCC: 3 | RNVC: 2
EA1M601-10-820: RNCC: 5 | RNVC: 2

16 May 1977

5975-14-424-9875
Cable Marker Sleeve

144249875
HT50-25J0104: RNCC: 3 | RNVC: 2

16 Jun 1988

5975-14-541-9868
Interior Cable Rack

145419868
20026-745: RNCC: 3 | RNVC: 2
502106005001A: RNCC: 3 | RNVC: 9

2 Jul 2004

5975-14-482-2943
Cable Marker Sleeve

144822943
HOI85-5ROF: RNCC: 3 | RNVC: 2
HOI85F: RNCC: 5 | RNVC: 2
0617180: RNCC: 5 | RNVC: 2

4 Jul 1996

5975-14-431-5963
Cable Marker Sleeve

144315963
364-002-1-2: RNCC: 3 | RNVC: 2

26 Apr 1989

5975-14-543-5096
Junction Box

145435096
330A65-4678-00: RNCC: 3 | RNVC: 2

16 Nov 2004

5975-14-360-5316
Interior Cable Rack

143605316
429008: RNCC: 3 | RNVC: 2
429008: RNCC: 5 | RNVC: 2
D107-220GC: RNCC: 5 | RNVC: 2

23 Nov 1979

5975-14-402-4092
Cable Marker Sleeve

144024092
01PR0TMS4W3-32: RNCC: 1 | RNVC: 2
TMS3-32NR13U9: RNCC: 3 | RNVC: 2
HS024WE4DSU: RNCC: 5 | RNVC: 2
TMS3-32NR13U9: RNCC: 5 | RNVC: 9
TMSSCE2X3-32S3-9: RNCC: 5 | RNVC: 9

3 Jul 1985

5975-14-481-6922
Interconnecting Box

144816922
815-3-71-800: RNCC: 3 | RNVC: 2

23 May 1996

5975-14-322-2413
Cable Marker Sleeve

143222413
NO PRIMARY REF14-322-2413: RNCC: 3 | RNVC: 2
9560115510: RNCC: 5 | RNVC: 2
35581-2: RNCC: 5 | RNVC: 9

1 Jan 1975

5975-14-458-2660
Stuffing Tube

144582660
C68312A1A29MD1624A660AHQ1: RNCC: 2 | RNVC: 2
862400: RNCC: 3 | RNVC: 2
20070: RNCC: 3 | RNVC: 2
1004-862400: RNCC: 5 | RNVC: 2
CM24LONG: RNCC: 5 | RNVC: 2

15 Oct 1992

5975-14-299-1270
Access Cover

142991270
121E63-431-40-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-238-2690
Cable Marker Sleeve

142382690
352005REP9: RNCC: 3 | RNVC: 2
99044468: RNCC: 3 | RNVC: 2
99044468: RNCC: 5 | RNVC: 2
352-05REP9: RNCC: 5 | RNVC: 2
HELAVIATWIN4REP9: RNCC: 5 | RNVC: 2
99044468: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-33-106-2855
Interconnecting Box

331062855
5975-000392: RNCC: 3 | RNVC: 2
M063514-01: RNCC: 3 | RNVC: 2

21 Aug 1997

5975-14-409-0365
Cable Marker Sleeve

144090365
P15-3-2JOB: RNCC: 3 | RNVC: 2
P15-3-2JORBNR: RNCC: 5 | RNVC: 2
12450838-8: RNCC: 5 | RNVC: 2

16 Apr 1986

5975-14-413-0903
Cable Marker Sleeve

144130903
P15-3-2MA1: RNCC: 3 | RNVC: 2
P15-1: RNCC: 5 | RNVC: 2
P15-3,2MA1: RNCC: 5 | RNVC: 2
P15MA1: RNCC: 5 | RNVC: 2
12450874-7: RNCC: 5 | RNVC: 2

26 Nov 1986

5975-14-548-9771
Cable Hanger

145489771
21244066-00: RNCC: 3 | RNVC: 2
21244066-0: RNCC: 5 | RNVC: 2

27 Feb 2006

5975-14-520-4265
Interconnecting Box

145204265
D04BB1370-048: RNCC: 3 | RNVC: 2
D04BB1370-048: RNCC: 5 | RNVC: 2

17 May 2000

5975-14-542-5301
Cable Marker Sleeve

145425301
2594-242: RNCC: 3 | RNVC: 2

21 Jul 2004

5975-14-438-4895
Cable Hanger

144384895
332A61-4213-00: RNCC: 3 | RNVC: 2

21 Mar 1990

5975-14-314-3767
Cable Marker Sleeve

143143767
362006-08REP7: RNCC: 3 | RNVC: 2
H060-4V07: RNCC: 3 | RNVC: 2
M40VI0LETREP7: RNCC: 5 | RNVC: 2
H060-6V07: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-481-1739
Switch Box Case

144811739
6196-13-01196: RNCC: 3 | RNVC: 2

24 Apr 1996

5975-14-432-4667
Cable Hanger

144324667
232030402: RNCC: 3 | RNVC: 2
HGPU25-2INOX+THERMO: RNCC: 5 | RNVC: 2

14 Jun 1989

5975-14-235-4628
Cable Marker Sleeve

142354628
NO PRIMARY REF14-235-4628: RNCC: 3 | RNVC: 2
2790-4-9: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-416-7218
Cable Marker Sleeve

144167218
HT15-25BA11-030: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-401-7303
Rigid Metal Conduit

144017303
FH1E294-22-02: RNCC: 3 | RNVC: 2

13 Jun 1985

5975-14-465-0382
Interior Cable Rack

144650382
REMDCHEGZLE-SERT-020049-51-53-: RNCC: 3 | RNVC: 2

8 Sep 1993

5975-14-535-0111
Interconnecting Box

145350111
CRP401-610A1: RNCC: 3 | RNVC: 2

28 Apr 2003

5975-14-449-5783
Junction Box

144495783
09121609: RNCC: 3 | RNVC: 2
09-12-16-09: RNCC: 5 | RNVC: 2
9121609: RNCC: 5 | RNVC: 2

27 Aug 1991

5975-14-306-0598
Rigid Metal Conduit

143060598
A10-63-800-10-0: RNCC: 3 | RNVC: 2
A10-63-800-10-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-33-201-4583
Chassis Base

332014583
223561771-01: RNCC: 3 | RNVC: 2

26 Jul 2002

5975-14-510-1128
Metallic Raceway

145101128
F291-66RS1: RNCC: 3 | RNVC: 2
1560AA8007684: RNCC: 6 | RNVC: 9

4 Nov 1998

5975-33-201-6356
Chassis Base

332016356
223561802-01: RNCC: 3 | RNVC: 2

19 Sep 2002

5975-14-499-4430
Cable Marker Sleeve

144994430
5600023-060330-000-0-10: RNCC: 3 | RNVC: 2
5600023-060330.000.0-10: RNCC: 5 | RNVC: 2
F300 0T 022 0968: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-27-046-3195
Junction Box Cover

270463195
660-10651: RNCC: 2 | RNVC: 1

29 Jul 2009

5975-14-472-7625
Guide Rail

144727625
332A76-9001-01: RNCC: 3 | RNVC: 2

9 Nov 1994

5975-27-016-9390
Metallic Raceway

270169390
4T22-200SP: RNCC: 2 | RNVC: 1
4T22-200SP: RNCC: 2 | RNVC: 1

15 Apr 2003

5975-14-339-4429
Cable Marker Sleeve

143394429
SLP15-10J0R7NR: RNCC: 3 | RNVC: 2
620-849-007-0: RNCC: 5 | RNVC: 2
620-849-007-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-526-5111
Cable Marker Sleeve

145265111
D65377-15: RNCC: 3 | RNVC: 2

1 Aug 2001

5975-14-445-4290
Chassis Base

144454290
5231-210-000: RNCC: 3 | RNVC: 2
5231-210-000: RNCC: 5 | RNVC: 2

14 Feb 1991

5975-14-456-4351
Cable Marker Sleeve

144564351
H030-4VR5: RNCC: 3 | RNVC: 2

2 Jul 1992

5975-14-513-5786
Interconnecting Box

145135786
332P04-5023-5002: RNCC: 3 | RNVC: 2

24 Mar 1999

5975-14-384-3599
Push Button

143843599
BMC1-1-032N: RNCC: 3 | RNVC: 9

4 May 1983

5975-14-524-6809
Junction Box

145246809
5DP55-H5P55: RNCC: 3 | RNVC: 2
23RNSW400000027PL2/2.PAGE16: RNCC: 3 | RNVC: 2
H5P55: RNCC: 5 | RNVC: 2
SYB2992: RNCC: 5 | RNVC: 2

4 Apr 2001

5975-14-479-1531
Cable Marker Sleeve

144791531
035200150042: RNCC: 3 | RNVC: 2
352-015-2: RNCC: 5 | RNVC: 2
HELEVIATWIN4REP2: RNCC: 5 | RNVC: 2
352015REP2: RNCC: 5 | RNVC: 2

18 Dec 1995

5975-14-475-3211
Cable Marker Sleeve

144753211
HT100-35JORW043737: RNCC: 3 | RNVC: 2
HT100-35JOW043737: RNCC: 5 | RNVC: 2

29 Mar 1995

5975-14-445-6324
Cable Marker Sleeve

144456324
H085-4BU6: RNCC: 3 | RNVC: 2

20 Feb 1991

5975-14-391-0290
Junction Box

143910290
BJ2574-0201: RNCC: 3 | RNVC: 2

1 Mar 1984

5975-14-438-4894
Cable Hanger

144384894
332A61-4211-20: RNCC: 3 | RNVC: 2

21 Mar 1990

5975-14-383-9527
Cable Marker Sleeve

143839527
78-15CXZ5S30LAB110JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ5S30JLAB110: RNCC: 5 | RNVC: 2
78-15CXZ5S30LAB110J: RNCC: 5 | RNVC: 2

4 May 1983

5975-14-388-3314
Cable Marker Sleeve

143883314
802-008F2214 A24: RNCC: 3 | RNVC: 2
A24582: RNCC: 5 | RNVC: 9
A24582/0000: RNCC: 5 | RNVC: 9

3 Nov 1983

5975-14-384-4032
Cable Marker Sleeve

143844032
03620009001E: RNCC: 3 | RNVC: 2
3597470047491: RNCC: 5 | RNVC: 2
362009-01REPE: RNCC: 5 | RNVC: 2
362009REPE: RNCC: 5 | RNVC: 2
M16BLANCREPE: RNCC: 5 | RNVC: 2

4 May 1983

5975-27-009-3574
Junction Box

270093574
5999-9022-6090: RNCC: 2 | RNVC: 1
5999-9022-6090: RNCC: 2 | RNVC: 1

20 Jun 2001

5975-15-201-9060
Blank Panel

152019060
999-0500-85-243: RNCC: 3 | RNVC: 2
(241)A0126999-0500-85-243: RNCC: 5 | RNVC: 2

11 Jan 2007

5975-14-353-9939
Cable Marker Sleeve

143539939
0294700750: RNCC: 3 | RNVC: 2
302-300-401-0: RNCC: 5 | RNVC: 2
302-300-401P: RNCC: 5 | RNVC: 2
620-857-288-0: RNCC: 5 | RNVC: 2

16 Jan 1979

5975-14-409-0359
Cable Marker Sleeve

144090359
P12-3-2JOB: RNCC: 3 | RNVC: 2
12450771-6: RNCC: 5 | RNVC: 2
P12-3-2JORBNR: RNCC: 5 | RNVC: 2

16 Apr 1986

5975-14-310-4911
Indicator Panel

143104911
A10-63-227-33-0: RNCC: 3 | RNVC: 2
A10-63-227-33-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-389-1532
Cable Marker Sleeve

143891532
358-007: RNCC: 3 | RNVC: 2
BJM07308: RNCC: 5 | RNVC: 2

29 Nov 1983

5975-14-309-6694
Junction Box

143096694
121S63-237-10-07: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-487-0733
Junction Box

144870733
48323131: RNCC: 3 | RNVC: 2
7511-183-23131: RNCC: 5 | RNVC: 9

2 Apr 1997

5975-14-438-4892
Cable Hanger

144384892
332A61-4207-20: RNCC: 3 | RNVC: 2

21 Mar 1990

5975-14-306-0566
Metallic Raceway

143060566
A10-63-347-03-0: RNCC: 3 | RNVC: 2
A10-63-347-03-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-436-4160
Stand Base

144364160
SUPEC20-20: RNCC: 3 | RNVC: 2

22 Dec 1989

5975-14-406-2342
Stuffing Tube

144062342
632087: RNCC: 3 | RNVC: 2
394816: RNCC: 5 | RNVC: 2
4-19-165: RNCC: 5 | RNVC: 2

8 Jan 1986

5975-14-485-4553
Interconnecting Box

144854553
434323: RNCC: 3 | RNVC: 2
434323-001: RNCC: 5 | RNVC: 9
KE*614: RNCC: 5 | RNVC: 9

23 Jan 1997

5975-33-202-0682
Interconnecting Box

332020682
CFAMET-E17-01-25: RNCC: 3 | RNVC: 2
CFAMET-E17-01-25: RNCC: 5 | RNVC: 9

3 Jan 2003

5975-14-442-6704
Cable Marker Sleeve

144426704
SLP20-10J0R5NR: RNCC: 3 | RNVC: 2

24 Oct 1990

5975-14-517-3747
Cable Marker Sleeve

145173747
602-06750: RNCC: 3 | RNVC: 2
HT30: RNCC: 5 | RNVC: 1

8 Dec 1999

5975-14-279-2235
Interior Cable Rack

142792235
30180: RNCC: 3 | RNVC: 2

1 Jan 1971

5975-27-007-7152
Cable Marker Sleeve

270077152
320.01.00001: RNCC: 2 | RNVC: 1
KG1: RNCC: 2 | RNVC: 1
KG1-05001DK0183: RNCC: 2 | RNVC: 1
KG1: RNCC: 2 | RNVC: 1
KG1: RNCC: 5 | RNVC: 9

3 Jan 2003

5975-14-550-6098
Metallic Raceway

145506098
6045-161-000A: RNCC: 3 | RNVC: 2

30 Jun 2006

5975-14-383-9497
Cable Marker Sleeve

143839497
78-15CXZ5S30LAB144JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ5S30JLAB144: RNCC: 5 | RNVC: 2
78-15CXZ5S30LAB144J: RNCC: 5 | RNVC: 2

4 May 1983

5975-14-454-5434
Cable Marker Sleeve

144545434
HT30-35JO: RNCC: 3 | RNVC: 2
TH30JAUNE: RNCC: 5 | RNVC: 2
85-690-4359: RNCC: 6 | RNVC: 9

2 Apr 1992

5975-14-373-6243
Cable Marker Sleeve

143736243
7815CXZ11S30KD1890AJ: RNCC: 3 | RNVC: 2
204337-1890A: RNCC: 5 | RNVC: 2

13 Nov 1981

5975-14-463-9662
Cable Marker Sleeve

144639662
620-867-481-0: RNCC: 3 | RNVC: 2

7 Jul 1993

5975-14-416-7233
Cable Marker Sleeve

144167233
HT15-25BA11-057: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-545-9736
Cable Marker Sleeve

145459736
03740140004K: RNCC: 3 | RNVC: 2
03740140004K: RNCC: 5 | RNVC: 2
6071-GT-0000113: RNCC: 5 | RNVC: 2

31 May 2005

5975-14-314-3769
Cable Marker Sleeve

143143769
HT100-25J0KD1801A: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-528-3498
Junction Box

145283498
XAP-A1120: RNCC: 3 | RNVC: 2

23 Jan 2002

5975-14-465-0026
Interconnecting Box

144650026
365P67-1644-0001: RNCC: 3 | RNVC: 2

8 Sep 1993

5975-14-356-9263
Cable Marker Sleeve

143569263
036002050053: RNCC: 3 | RNVC: 2
3597470040683: RNCC: 5 | RNVC: 2
360105REP3: RNCC: 5 | RNVC: 2
360205REP3: RNCC: 5 | RNVC: 2
V27-0RANGEREP3: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-328-1578
Switchboard Signal

143281578
21143-02-10-34: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-356-2370
Cable Marker Sleeve

143562370
H20-20RG: RNCC: 3 | RNVC: 2
N20-20RG: RNCC: 5 | RNVC: 2
VDP4050: RNCC: 5 | RNVC: 2

25 Apr 1979

5975-14-496-6981
Interconnecting Box

144966981
IF185-090: RNCC: 3 | RNVC: 9
F300 0T 021 9267: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-209-5243
Cable Collar

142095243
NO PRIMARY REF14-209-5243: RNCC: 3 | RNVC: 2
21188: RNCC: 5 | RNVC: 9

1 Jan 1964

5975-14-416-7319
Cable Marker Sleeve

144167319
HT20-25BA12-053: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-15-204-6568
Rigid Metal Conduit

152046568
N6930-02: RNCC: 3 | RNVC: 2
(241)A1823N6930-02: RNCC: 5 | RNVC: 2

5 Dec 2011

5975-14-479-9303
Cable Marker Sleeve

144799303
TMS-NR501NR13U9: RNCC: 3 | RNVC: 9
TMSNR501NR13U9: RNCC: 5 | RNVC: 9

14 Feb 1996

5975-14-541-5062
Guide Rail

145415062
1091088-001: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-391-2419
Cable Marker Sleeve

143912419
036200110100: RNCC: 3 | RNVC: 2
3597470142004: RNCC: 5 | RNVC: 2
362001-10REP0: RNCC: 5 | RNVC: 2
362011REP0: RNCC: 5 | RNVC: 2
H012-4NR0: RNCC: 5 | RNVC: 2

1 Mar 1984

5975-14-463-9651
Cable Marker Sleeve

144639651
620-867-469-0: RNCC: 3 | RNVC: 2

7 Jul 1993

5975-14-442-6697
Cable Marker Sleeve

144426697
SLP20-10J0RPNR: RNCC: 3 | RNVC: 2

24 Oct 1990

5975-14-415-7239
Cable Marker Sleeve

144157239
SLP20-10J0RVNR: RNCC: 3 | RNVC: 2
620-867-047-0: RNCC: 5 | RNVC: 2

18 May 1987

5975-14-356-2625
Push Button

143562625
1150BLWSRTF1-12-12F2-21-21: RNCC: 3 | RNVC: 2

25 Apr 1979

5975-14-484-2615
Cable Marker Sleeve

144842615
620-848-239-0: RNCC: 3 | RNVC: 2

31 Oct 1996

5975-14-552-9071
Interconnecting Box

145529071
IF-241-955: RNCC: 3 | RNVC: 9

13 Feb 2007

5975-14-454-3442
Stuffing Tube

144543442
017-4220: RNCC: 3 | RNVC: 2
15110630Y: RNCC: 5 | RNVC: 2

1 Apr 1992

5975-14-439-9445
Junction Box Cover

144399445
2148A06: RNCC: 3 | RNVC: 2
85-693-9166: RNCC: 6 | RNVC: 9

7 Jun 1990

5975-14-438-4888
Cable Hanger

144384888
332A61-4203-21: RNCC: 3 | RNVC: 2

21 Mar 1990

5975-14-456-4364
Cable Marker Sleeve

144564364
H050-40R3: RNCC: 3 | RNVC: 2

2 Jul 1992

5975-14-433-1479
Cable Marker Sleeve

144331479
ST400S58P205-064: RNCC: 3 | RNVC: 2
6-064: RNCC: 5 | RNVC: 2

11 Jul 1989

5975-14-476-1412
Cable Marker Sleeve

144761412
HOI50-RO-X: RNCC: 3 | RNVC: 2
HOI50-X: RNCC: 5 | RNVC: 2
HOI50-X-ROSE: RNCC: 5 | RNVC: 2

24 May 1995

5975-14-324-4495
Rigid Metal Conduit

143244495
121E63-414-20-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-319-5595
Stuffing Tube Plug

143195595
GSM426-007F15: RNCC: 3 | RNVC: 2
000EL013REP18-1: RNCC: 5 | RNVC: 2
GSM426-07F15: RNCC: 5 | RNVC: 2

1 Jan 1975

5975-14-540-2476
Cable Marker Sleeve

145402476
ST18-2-55-24-09: RNCC: 3 | RNVC: 2
ST18-2-55-24-09: RNCC: 5 | RNVC: 9

16 Mar 2004

5975-14-373-0924
Raceway Cover

143730924
012439 500 20: RNCC: 3 | RNVC: 2
C 2335 001: RNCC: 5 | RNVC: 2
01243950020: RNCC: 5 | RNVC: 2
01243950020: RNCC: 5 | RNVC: 2
91584364: RNCC: 5 | RNVC: 2
12439: RNCC: 5 | RNVC: 2
12439-500: RNCC: 5 | RNVC: 2
C 2335 001: RNCC: 5 | RNVC: 2
C2335001: RNCC: 5 | RNVC: 9
C2335001: RNCC: 5 | RNVC: 9

21 Sep 1981

5975-15-108-9483
Cable Collar

151089483
PG16: RNCC: 3 | RNVC: 2

1 Jan 1994

5975-14-345-0057
Junction Box

143450057
000865282P: RNCC: 3 | RNVC: 2

5 Oct 1977

5975-14-445-0351
Cable Marker Sleeve

144450351
1-109: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-481-1858
Stuffing Tube

144811858
242102: RNCC: 3 | RNVC: 2

25 Apr 1996

5975-14-378-4092
Fanning Strip

143784092
366A62-1227-00: RNCC: 3 | RNVC: 2

7 Mar 1996

5975-14-344-7699
Switch Box Case

143447699
80-350145: RNCC: 3 | RNVC: 2
85-350-1450: RNCC: 6 | RNVC: 9

9 Sep 1977

5975-14-526-5028
Cable Marker Sleeve

145265028
D65377-11: RNCC: 3 | RNVC: 2

1 Aug 2001

5975-14-346-2143
Push Button

143462143
5702-1-231: RNCC: 3 | RNVC: 2

12 Dec 1977

5975-14-384-0841
Stuffing Tube

143840841
NO PRIMARY REF14-384-0841: RNCC: 3 | RNVC: 2
206-2003-9: RNCC: 5 | RNVC: 9
709844: RNCC: 5 | RNVC: 9

4 May 1983

5975-14-356-0665
Metallic Raceway

143560665
EA1M701-27-870: RNCC: 3 | RNVC: 2

5 Apr 1979

5975-14-500-8667
Blank Panel

145008667
D66205000001: RNCC: 3 | RNVC: 2
F300 0T 024 8870: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-454-4661
Interconnecting Box

144544661
8174050: RNCC: 3 | RNVC: 2

2 Apr 1992

5975-14-282-5336
Cable Marker Sleeve

142825336
9131510: RNCC: 3 | RNVC: 2
9131510: RNCC: 5 | RNVC: 9

1 Jan 1971

5975-14-513-9291
Cable Marker Sleeve

145139291
2702-391A537: RNCC: 3 | RNVC: 2

19 Apr 1999

5975-14-503-9533
Guide Rail

145039533
3327070: RNCC: 3 | RNVC: 2

4 Feb 1998

5975-14-542-1356
Interconnecting Box

145421356
10665056000: RNCC: 3 | RNVC: 2

8 Jul 2004

5975-14-513-8498
Interconnecting Box

145138498
356186: RNCC: 3 | RNVC: 2

14 Apr 1999

5975-14-456-9776
Cable Marker Sleeve

144569776
0702-191A335: RNCC: 3 | RNVC: 2
0702-191A335: RNCC: 5 | RNVC: 2

30 Jul 1992

5975-14-351-0453
Cable Marker Sleeve

143510453
7815CXZ11S30KD1233AJ: RNCC: 3 | RNVC: 2
204337-1233A: RNCC: 5 | RNVC: 2

10 Aug 1978

5975-14-447-2556
Switchboard Signal

144472556
050C04-533598C: RNCC: 3 | RNVC: 2
0533598C00: RNCC: 5 | RNVC: 2

15 May 1991

5975-14-550-4164
Interconnecting Box

145504164
033280: RNCC: 3 | RNVC: 2
332 80: RNCC: 3 | RNVC: 9

19 Jun 2006

5975-14-518-8269
Switch Box Case

145188269
C3122-3: RNCC: 3 | RNVC: 2
1090357E01: RNCC: 5 | RNVC: 2

22 Feb 2000

5975-14-364-1911
Stuffing Tube

143641911
412862-5: RNCC: 3 | RNVC: 2
412862-5: RNCC: 5 | RNVC: 2

7 Aug 1980

5975-14-465-6646
Cable Marker Sleeve

144656646
D51900-3: RNCC: 3 | RNVC: 2

6 Oct 1993

5975-14-342-0391
Raceway Cover

143420391
C0DSZ195: RNCC: 3 | RNVC: 2
C0DSZ195: RNCC: 5 | RNVC: 2
101024: RNCC: 5 | RNVC: 9
101024LONG3M: RNCC: 5 | RNVC: 9
C0DSZ195: RNCC: 5 | RNVC: 9

14 Apr 1977

5975-14-396-5321
Interior Cable Rack

143965321
219504: RNCC: 3 | RNVC: 2

27 Nov 1984

5975-15-156-8902
Electrical Rosette

151568902
3OT XDO-4: RNCC: 3 | RNVC: 2

10 Mar 2003

5975-14-356-9250
Cable Marker Sleeve

143569250
03600105015Q: RNCC: 3 | RNVC: 2
360105REPQ: RNCC: 5 | RNVC: 2
3597470037027: RNCC: 5 | RNVC: 2
V27REPQ: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-515-4058
Cable Marker Sleeve

145154058
21092053A: RNCC: 3 | RNVC: 2

13 Jul 1999

5975-14-445-6298
Cable Marker Sleeve

144456298
H090-6MA1: RNCC: 3 | RNVC: 2
5045035: RNCC: 5 | RNVC: 9

20 Feb 1991

5975-14-394-9056
Nonmetallic Raceway

143949056
13008: RNCC: 3 | RNVC: 2
G030X23C: RNCC: 5 | RNVC: 2

2 Oct 1984

5975-14-517-8273
Cable Hanger

145178273
F1284752: RNCC: 3 | RNVC: 2

13 Jan 2000

5975-14-362-6049
Cable Marker Sleeve

143626049
03600101015Y: RNCC: 3 | RNVC: 2
3597470035382: RNCC: 5 | RNVC: 2
360101REPY: RNCC: 5 | RNVC: 2
V09REPY: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-341-6500
Conduit Outlet

143416500
70222: RNCC: 3 | RNVC: 2

14 Apr 1977

5975-14-475-9329
Interconnecting Box

144759329
46302736: RNCC: 3 | RNVC: 2

10 May 1995

5975-14-485-2343
Interior Cable Rack

144852343
421034: RNCC: 3 | RNVC: 2
421034: RNCC: 5 | RNVC: 2
421034: RNCC: 5 | RNVC: 2

13 Jan 1997

5975-14-482-0416
Metallic Raceway

144820416
009092226P: RNCC: 3 | RNVC: 2

15 Jun 1996

5975-14-456-6428
Metallic Raceway

144566428
BXLO000XACH001F7LG500MM: RNCC: 3 | RNVC: 2

16 Jul 1992

5975-14-403-3804
Metallic Raceway

144033804
195590: RNCC: 3 | RNVC: 2

21 Aug 1985

5975-14-481-7312
Stuffing Tube

144817312
222500: RNCC: 3 | RNVC: 2

30 May 1996

5975-14-445-0361
Cable Marker Sleeve

144450361
1-122: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-15-113-0962
Cable Collar

151130962
DG 9: RNCC: 3 | RNVC: 2

11 Oct 1994

5975-14-454-4686
Blank Panel

144544686
8174245: RNCC: 3 | RNVC: 2

2 Apr 1992

5975-14-366-9179
Ground Rod

143669179
BBZ9010: RNCC: 3 | RNVC: 2

11 Dec 1980

5975-14-509-3476
Interconnecting Box

145093476
46302421: RNCC: 3 | RNVC: 2

28 Oct 1998

5975-33-108-3964
Cable Marker Sleeve

331083964
Q 314 196 108: RNCC: 3 | RNVC: 2

1 Mar 2001

5975-15-174-7024
Blank Panel

151747024
ECN40SB-1: RNCC: 3 | RNVC: 2

2 Oct 2003

5975-14-475-3191
Cable Marker Sleeve

144753191
HT150-35JORW043703: RNCC: 3 | RNVC: 2
HT150-35JOW043703: RNCC: 5 | RNVC: 2

29 Mar 1995

5975-14-550-7202
Cable Hanger

145507202
78765-040-040: RNCC: 3 | RNVC: 2

7 Jul 2006

5975-14-478-8956
Interconnecting Box

144788956
5620331R00: RNCC: 3 | RNVC: 2
5620331R00: RNCC: 5 | RNVC: 9

30 Nov 1995

5975-14-362-6128
Cable Marker Sleeve

143626128
03600111015Z: RNCC: 3 | RNVC: 2
3597470039793: RNCC: 5 | RNVC: 2
360111REPZ: RNCC: 5 | RNVC: 2
V80REPZ: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-448-2781
Stuffing Tube

144482781
5975BA-CV8L: RNCC: 2 | RNVC: 2
5975BA-CV8L: RNCC: 3 | RNVC: 2
5975BA-CV8L: RNCC: 3 | RNVC: 2

18 Jun 1991

5975-14-426-4878
Cable Marker Sleeve

144264878
WBS3-R: RNCC: 3 | RNVC: 2

1 Sep 1988

5975-14-445-0348
Cable Marker Sleeve

144450348
1-106: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-501-5810
Metallic Raceway

145015810
46158729: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-14-448-6094
Blank Panel

144486094
90DD222001: RNCC: 3 | RNVC: 2

4 Jul 1991

5975-14-251-8439
Rigid Metal Conduit

142518439
MRBPE36ADXFILETEMANCH0NNEPEINT: RNCC: 2 | RNVC: 2

1 Jan 1968

5975-14-404-7281
Cable Marker Sleeve

144047281
39049090: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-485-6450
Stuffing Tube

144856450
45228542: RNCC: 3 | RNVC: 2

6 Feb 1997

5975-14-342-4938
Metallic Raceway

143424938
4770001760: RNCC: 3 | RNVC: 2

16 May 1977

5975-27-037-9928
Guide Rail

270379928
10026140: RNCC: 2 | RNVC: 1

7 Sep 2007

5975-15-064-9449
Cable Collar

150649449
1029-30: RNCC: 3 | RNVC: 2

28 Aug 1979

5975-33-202-6947
Interconnecting Box

332026947
9673.590.5960: RNCC: 3 | RNVC: 2
2510903196: RNCC: 5 | RNVC: 2
2510903196: RNCC: 5 | RNVC: 2

26 Sep 2003

5975-14-282-5692
Cable Marker Sleeve

142825692
12505540: RNCC: 3 | RNVC: 2
12505540: RNCC: 5 | RNVC: 9

1 Jan 1971

5975-14-502-5066
Metallic Raceway

145025066
5000452457: RNCC: 3 | RNVC: 2

17 Dec 1997

5975-14-480-7424
Junction Box

144807424
5010114007: RNCC: 3 | RNVC: 2

28 Mar 1996

5975-33-107-3650
Stuffing Tube

331073650
5970.000163: RNCC: 3 | RNVC: 2

27 Sep 1999

5975-14-355-6645
Conduit Outlet

143556645
DPD02: RNCC: 3 | RNVC: 2

19 Mar 1979

5975-14-504-2544
Cable Marker Sleeve

145042544
3599117M1: RNCC: 3 | RNVC: 2

11 Feb 1998

5975-33-108-7398
Bridle Ring

331087398
WW 488 311: RNCC: 3 | RNVC: 2

16 Jul 2001

5975-14-402-6456
Cable Marker Sleeve

144026456
411752: RNCC: 3 | RNVC: 2

19 Jul 1985

5975-14-453-5811
Cable Marker Sleeve

144535811
BAZ11735: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-550-2923
Junction Box

145502923
2236349530: RNCC: 3 | RNVC: 2

15 Jun 2006

5975-14-254-1174
Cable Marker Sleeve

142541174
352005REPA: RNCC: 3 | RNVC: 2
99044432: RNCC: 5 | RNVC: 2
HELAVIATWIN4REPA: RNCC: 5 | RNVC: 2
99044432: RNCC: 5 | RNVC: 9
99044432: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-15-100-9923
Ground Rod

151009923
DE013.12.582: RNCC: 3 | RNVC: 2

2 Oct 1987

5975-14-382-9261
Nonmetallic Raceway

143829261
4770202520: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-33-190-3780
Conduit Outlet

331903780
80.80.77: RNCC: 3 | RNVC: 2

20 Jul 1995

5975-33-105-0621
Ground Rod

331050621
PCT0029: RNCC: 3 | RNVC: 2

6 Mar 1996

5975-14-466-8362
Stuffing Tube

144668362
360320: RNCC: 3 | RNVC: 2

3 Dec 1993

5975-14-383-0526
Cable Marker Sleeve

143830526
16899836: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-15-202-6512
Blank Panel

152026512
532524109: RNCC: 3 | RNVC: 2
(241)AG280532524109: RNCC: 5 | RNVC: 2

6 Jun 2007

5975-14-319-7185
Cable Marker Sleeve

143197185
0084050290: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-454-4641
Blank Panel

144544641
8174021: RNCC: 3 | RNVC: 2

2 Apr 1992

5975-14-315-0074
Junction Box Cover

143150074
306-6464DET18: RNCC: 3 | RNVC: 2
306-6464DET18: RNCC: 5 | RNVC: 9

1 Jan 1975

5975-14-326-6557
Junction Box

143266557
4DP64: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-254-1134
Cable Marker Sleeve

142541134
03520003004K: RNCC: 3 | RNVC: 2
99008757: RNCC: 5 | RNVC: 2
HELAVIATWIN2REPK: RNCC: 5 | RNVC: 2
352003REPK: RNCC: 5 | RNVC: 2
99008757: RNCC: 5 | RNVC: 9
99008757: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-383-3226
Junction Box

143833226
XALB029: RNCC: 3 | RNVC: 2
3389110660173: RNCC: 5 | RNVC: 2
BFP00688P: RNCC: 5 | RNVC: 2

11 Apr 1983

5975-14-268-9995
Cable Marker Sleeve

142689995
03520003004$: RNCC: 3 | RNVC: 2
HELAVIATWIN2REPCA: RNCC: 5 | RNVC: 2
352003SYMBCA: RNCC: 5 | RNVC: 2

1 Jan 1970

5975-14-467-2186
Interconnecting Box

144672186
46070297: RNCC: 3 | RNVC: 9

21 Dec 1993

5975-14-357-9521
Blank Panel

143579521
391249: RNCC: 3 | RNVC: 2

20 Jul 1979

5975-14-380-3192
Cable Marker Sleeve

143803192
C69114: RNCC: 3 | RNVC: 2

8 Nov 1982

5975-14-370-7288
Rigid Metal Conduit

143707288
208137: RNCC: 3 | RNVC: 2

5 Jun 1981

5975-14-508-1068
Interconnecting Box

145081068
F00138681: RNCC: 3 | RNVC: 2
F00138681: RNCC: 5 | RNVC: 9

26 Aug 1998

5975-14-470-1835
Switch Box Case

144701835
EC1ME: RNCC: 3 | RNVC: 2
RAB3303: RNCC: 5 | RNVC: 2

7 Jun 1994

5975-14-546-2277
Metallic Raceway

145462277
001112: RNCC: 3 | RNVC: 2
AA016697: RNCC: 6 | RNVC: 9

16 Jun 2005

5975-14-457-8611
Metallic Raceway

144578611
263879: RNCC: 3 | RNVC: 2
89469895: RNCC: 5 | RNVC: 2
146061: RNCC: 5 | RNVC: 2

24 Sep 1992

5975-14-382-5842
Cable Marker Sleeve

143825842
16774611: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-553-4702
Cable Marker Sleeve

145534702
0084102780: RNCC: 3 | RNVC: 2

5 Apr 2007

5975-14-404-7221
Cable Marker Sleeve

144047221
20781444: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-449-5751
Cable Marker Sleeve

144495751
03640002004G: RNCC: 3 | RNVC: 2
3597470050255: RNCC: 5 | RNVC: 2
364002REPG: RNCC: 5 | RNVC: 2

27 Aug 1991

5975-14-402-1162
Cable Marker Sleeve

144021162
401791: RNCC: 3 | RNVC: 2
BGE401791: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-356-9244
Cable Marker Sleeve

143569244
03600105015K: RNCC: 3 | RNVC: 2
3597470036945: RNCC: 5 | RNVC: 2
360105REPK: RNCC: 5 | RNVC: 2
V27REPK: RNCC: 5 | RNVC: 2

15 May 1979

5975-15-067-1129
Cable Collar

150671129
5-8POLL-ALL: RNCC: 2 | RNVC: 2

1 Apr 1998

5975-14-340-1631
Cable Marker Sleeve

143401631
0084053240: RNCC: 3 | RNVC: 2

18 Jan 1977

5975-14-408-1031
Junction Box

144081031
0808370T00: RNCC: 3 | RNVC: 2
89408419: RNCC: 5 | RNVC: 2

19 Mar 1986

5975-14-535-0596
Stuffing Tube

145350596
40013: RNCC: 3 | RNVC: 2
CAE01573: RNCC: 5 | RNVC: 2

30 Apr 2003

5975-14-384-7102
Cable Marker Sleeve

143847102
16774631: RNCC: 3 | RNVC: 2

2 Jun 1983

5975-33-002-3258
Blank Panel

330023258
115.12.04: RNCC: 3 | RNVC: 2

22 Aug 1994

5975-27-016-9414
Raceway Cover

270169414
4T62-500: RNCC: 2 | RNVC: 1
4T62-500: RNCC: 2 | RNVC: 1

16 Apr 2003

5975-14-401-3114
Metallic Raceway

144013114
223164: RNCC: 3 | RNVC: 2

5 Jun 1985

5975-14-304-0074
Interior Cable Rack

143040074
CP94: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-490-5564
Junction Box

144905564
J05085-05-0600: RNCC: 3 | RNVC: 2

2 Oct 1997

5975-27-042-6253
Ground Rod

270426253
2ABEP00866: RNCC: 2 | RNVC: 1

2 Sep 2008

5975-14-548-9435
Interior Cable Rack

145489435
56652490AA00: RNCC: 3 | RNVC: 2

24 Feb 2006

5975-14-445-0447
Cable Marker Sleeve

144450447
6-024: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-339-2293
Ground Rod

143392293
TT3820: RNCC: 3 | RNVC: 2

18 Jan 1977

5975-14-553-1948
Ground Rod

145531948
215595: RNCC: 3 | RNVC: 2

13 Mar 2007

5975-14-514-3702
Switch Box Case

145143702
AESWN71912-901A: RNCC: 3 | RNVC: 2
SBY0172: RNCC: 5 | RNVC: 2

18 May 1999

5975-14-404-7332
Cable Marker Sleeve

144047332
39214596: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-15-063-1484
Junction Box Cover

150631484
5991600: RNCC: 3 | RNVC: 2

3 Jun 1982

5975-14-538-0318
Chassis Base

145380318
211861: RNCC: 3 | RNVC: 2

9 Dec 2003

5975-14-541-5456
Guide Rail

145415456
31101831: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-434-0369
Conduit Outlet

144340369
544302: RNCC: 3 | RNVC: 2

29 Aug 1989

5975-14-454-5728
Metallic Raceway

144545728
318779: RNCC: 3 | RNVC: 2
318779: RNCC: 5 | RNVC: 9

7 Apr 1992

5975-14-545-0637
Metallic Raceway

145450637
AM1-EA200: RNCC: 3 | RNVC: 2
19219214: RNCC: 3 | RNVC: 2

16 Mar 2005

5975-14-365-0246
Conduit Outlet

143650246
14202: RNCC: 3 | RNVC: 2

2 Sep 1980

5975-14-528-6591
Stuffing Tube

145286591
F010180: RNCC: 3 | RNVC: 2

1 Feb 2002

5975-14-404-8487
Cable Marker Sleeve

144048487
29747898: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-477-9570
Junction Box

144779570
1109050B00: RNCC: 3 | RNVC: 2

4 Oct 1995

5975-14-520-8072
Raceway Cover

145208072
102957: RNCC: 3 | RNVC: 2

14 Jun 2000

5975-14-445-4422
Cable Marker Sleeve

144454422
TRSA1012C1-4: RNCC: 3 | RNVC: 9

14 Feb 1991

5975-14-445-8649
Cable Marker Sleeve

144458649
0294702100: RNCC: 3 | RNVC: 2
302-420-701-0: RNCC: 5 | RNVC: 2

27 Feb 1991

5975-15-154-5336
Nonmetallic Raceway

151545336
1PA0596RA2002139: RNCC: 2 | RNVC: 3
RA2002139: RNCC: 2 | RNVC: 3
2002139: RNCC: 2 | RNVC: 3

6 Jul 2001

5975-15-156-8264
Access Hole Frame

151568264
RGS F 4: RNCC: 3 | RNVC: 2

7 Mar 2000

5975-33-190-3773
Conduit Outlet

331903773
60.30.77: RNCC: 3 | RNVC: 2

20 Jul 1995

5975-14-296-2119
Access Cover

142962119
121E63-230-50-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-523-1871
Nonmetallic Raceway

145231871
45710245: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-14-527-1664
Junction Box

145271664
13600012: RNCC: 3 | RNVC: 2

10 Oct 2001

5975-14-504-3390
Cable Marker Sleeve

145043390
3901102M1: RNCC: 3 | RNVC: 2

11 Feb 1998

5975-14-464-5023
Junction Box Cover

144645023
1180794: RNCC: 3 | RNVC: 2
1180794: RNCC: 5 | RNVC: 2

4 Aug 1993

5975-14-455-8580
Interior Cable Rack

144558580
47727115100: RNCC: 3 | RNVC: 2
5044861: RNCC: 5 | RNVC: 9

11 Jun 1992

5975-14-342-1743
Cable Marker Sleeve

143421743
3255-20004-605: RNCC: 3 | RNVC: 2
85-686-3912: RNCC: 6 | RNVC: 9

14 Apr 1977

5975-15-068-1176
Cable Hanger

150681176
2056/16/22: RNCC: 3 | RNVC: 2

4 Sep 1985

5975-14-368-5659
Push Button

143685659
110448: RNCC: 3 | RNVC: 2

20 Feb 1981

5975-14-463-9663
Cable Marker Sleeve

144639663
620-867-482-0: RNCC: 3 | RNVC: 2

7 Jul 1993

5975-14-404-8414
Cable Marker Sleeve

144048414
29747516: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-461-1408
Junction Box

144611408
3000358: RNCC: 3 | RNVC: 2
3000358: RNCC: 5 | RNVC: 9

24 Feb 1993

5975-14-445-0339
Cable Marker Sleeve

144450339
1-084: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-282-5329
Cable Marker Sleeve

142825329
9131502: RNCC: 3 | RNVC: 2
9131502: RNCC: 5 | RNVC: 9

1 Jan 1971

5975-14-457-6855
Cable Collar

144576855
1-00402110: RNCC: 3 | RNVC: 2

15 Sep 1992

5975-14-364-1913
Stuffing Tube

143641913
412862-7: RNCC: 3 | RNVC: 2
412862-7: RNCC: 5 | RNVC: 2

7 Aug 1980

5975-14-522-6206
Stuffing Tube

145226206
F0029001: RNCC: 3 | RNVC: 2

8 Nov 2000

5975-15-156-4379
Cable Collar

151564379
890TP0039: RNCC: 3 | RNVC: 2

5 Feb 2003

5975-14-456-9770
Cable Marker Sleeve

144569770
0702-006A008: RNCC: 3 | RNVC: 2
0702-006A008: RNCC: 5 | RNVC: 2

30 Jul 1992

5975-14-254-1083
Cable Marker Sleeve

142541083
352001SYMBP: RNCC: 3 | RNVC: 2
99043667: RNCC: 5 | RNVC: 2
352-01SIGNEP: RNCC: 5 | RNVC: 2
352001SYMB+: RNCC: 5 | RNVC: 2
HELAVIATWIN0REPSIGNEP: RNCC: 5 | RNVC: 2
99043667: RNCC: 5 | RNVC: 9
99043667: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-295-0076
Junction Box

142950076
022-10-0501: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-389-4766
Nonmetallic Raceway

143894766
365A61-3586-2101: RNCC: 3 | RNVC: 2

20 Dec 1983

5975-14-270-9111
Cable Marker Sleeve

142709111
204337-1389A: RNCC: 3 | RNVC: 2
7815CXZ11S30KD1389AJ: RNCC: 5 | RNVC: 9

1 Jan 1970

5975-14-545-9729
Cable Marker Sleeve

145459729
037401400049: RNCC: 3 | RNVC: 2
037401400049: RNCC: 5 | RNVC: 2
6070-GT-0000108: RNCC: 5 | RNVC: 9

31 May 2005

5975-14-316-2967
Push Button

143162967
NO PRIMARY REF14-316-2967: RNCC: 3 | RNVC: 2
U4-196: RNCC: 5 | RNVC: 9

1 Jan 1975

5975-14-340-1597
Cable Marker Sleeve

143401597
0084052870: RNCC: 3 | RNVC: 2

18 Jan 1977

5975-14-443-0731
Junction Box

144430731
R4P601-40M1: RNCC: 3 | RNVC: 2

7 Nov 1990

5975-14-545-2454
Rigid Metal Conduit

145452454
S217A2015103: RNCC: 3 | RNVC: 2

29 Mar 2005

5975-14-043-1198
Interior Cable Rack

140431198
064T10-612412E: RNCC: 3 | RNVC: 2

10 Apr 1984

5975-14-484-1709
Ground Rod

144841709
DE1510: RNCC: 3 | RNVC: 2

31 Oct 1996

5975-14-546-6902
Metallic Raceway

145466902
5010631704: RNCC: 3 | RNVC: 2

2 Aug 2005

5975-33-200-4103
Cable Marker Sleeve

332004103
Q 314 196 370: RNCC: 3 | RNVC: 2

22 Jan 2002

5975-14-469-7896
Interconnecting Box

144697896
45-0432: RNCC: 3 | RNVC: 2

10 May 1994

5975-14-339-4454
Cable Marker Sleeve

143394454
SLP15-10J0RRNR: RNCC: 3 | RNVC: 2
620-849-043-0: RNCC: 5 | RNVC: 2
620-849-043-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-464-0840
Nonmetallic Raceway

144640840
366A87-1025-2802: RNCC: 3 | RNVC: 2

15 Jul 1993

5975-14-461-3235
Cable Hanger

144613235
LN400010REPJ3: RNCC: 3 | RNVC: 2
LN400-010F17REPJ3: RNCC: 5 | RNVC: 2
RAB2903: RNCC: 5 | RNVC: 2

8 Mar 1993

5975-14-501-8691
Junction Box

145018691
1DP52-1PE1: RNCC: 3 | RNVC: 2
1DP521PE1: RNCC: 3 | RNVC: 2

17 Nov 1997

5975-14-520-3366
Cable Marker Sleeve

145203366
DAT40292: RNCC: 3 | RNVC: 2

17 May 2000

5975-14-392-0769
Cable Marker Sleeve

143920769
320-049-801-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5975-27-052-7474
Metallic Raceway

270527474
GAK-500-40-20: RNCC: 5 | RNVC: 9

21 Feb 2011

5975-14-416-7305
Cable Marker Sleeve

144167305
HT20-25BA12-039: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-438-9304
Junction Box

144389304
332A67-3872-05: RNCC: 3 | RNVC: 2

11 Apr 1990

5975-14-442-6690
Cable Marker Sleeve

144426690
SLP20-10J0RFNR: RNCC: 3 | RNVC: 2

24 Oct 1990

5975-14-401-0107
Cable Marker Sleeve

144010107
036200500015: RNCC: 3 | RNVC: 2
3597470048412: RNCC: 5 | RNVC: 2
362050-01REP5: RNCC: 5 | RNVC: 2
362050REP5: RNCC: 5 | RNVC: 2
M65BLANCREP5: RNCC: 5 | RNVC: 2

21 May 1985

5975-14-535-2861
Stuffing Tube

145352861
180774: RNCC: 3 | RNVC: 2

14 May 2003

5975-14-553-4696
Cable Marker Sleeve

145534696
0084106000: RNCC: 3 | RNVC: 2

5 Apr 2007

5975-14-479-1575
Cable Marker Sleeve

144791575
035200160043: RNCC: 3 | RNVC: 2
352-016-3: RNCC: 5 | RNVC: 2
HELAVIATWIN5SYMB3: RNCC: 5 | RNVC: 2
352016REP3: RNCC: 5 | RNVC: 2

18 Dec 1995

5975-14-431-6156
Cable Marker Sleeve

144316156
P20-4-8VR5: RNCC: 3 | RNVC: 2
P20VE5: RNCC: 5 | RNVC: 2

26 Apr 1989

Load More Results