What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 120 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 120of 491

5975-27-006-7257
Blank Panel

270067257
YG-AKS-003-004: RNCC: 2 | RNVC: 1

6 Apr 1999

5975-14-291-0491
Junction Box

142910491
NO PRIMARY REF14-291-0491: RNCC: 3 | RNVC: 2
502586: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-315-3651
Junction Box

143153651
121S63-451-00-0M1: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-485-4550
Interconnecting Box

144854550
434326: RNCC: 3 | RNVC: 2
434326-001: RNCC: 5 | RNVC: 9
KE*611: RNCC: 5 | RNVC: 9

23 Jan 1997

5975-27-038-5874
Junction Box Cover

270385874
5975-06219-00002: RNCC: 2 | RNVC: 1

19 Oct 2007

5975-14-524-7603
Blank Panel

145247603
21241544-00: RNCC: 3 | RNVC: 2
21241544-3: RNCC: 5 | RNVC: 2

11 Apr 2001

5975-14-412-1331
Cable Marker Sleeve

144121331
P15-3-2NR0: RNCC: 3 | RNVC: 2
P15-0: RNCC: 5 | RNVC: 2
P15NR0: RNCC: 5 | RNVC: 2
12450661-5: RNCC: 5 | RNVC: 2

8 Oct 1986

5975-14-291-8776
Stuffing Tube

142918776
NO PRIMARY REF14-291-8776: RNCC: 3 | RNVC: 2
BVL1: RNCC: 5 | RNVC: 2

1 Jan 1972

5975-14-545-9403
Cable Marker Sleeve

145459403
03740120004V: RNCC: 3 | RNVC: 2
03740120004V: RNCC: 5 | RNVC: 2
6070-GT-0000085: RNCC: 5 | RNVC: 9

30 May 2005

5975-15-068-1421
Cable Marker Sleeve

150681421
F492A1C-3-02: RNCC: 3 | RNVC: 2

1 Jan 1994

5975-14-501-6874
Cable Marker Sleeve

145016874
370101-04REP4: RNCC: 3 | RNVC: 2
91682544: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-14-420-7555
Cable Marker Sleeve

144207555
ST400S58P203-112: RNCC: 3 | RNVC: 2
3-112: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-382-6250
Cable Marker Sleeve

143826250
96080526: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-469-7888
Interconnecting Box

144697888
45-0425: RNCC: 3 | RNVC: 2

10 May 1994

5975-14-365-4450
Push Button

143654450
3-13002-002: RNCC: 3 | RNVC: 2
3-13002-002: RNCC: 5 | RNVC: 2
ER58426-2: RNCC: 5 | RNVC: 9

19 Sep 1980

5975-14-499-0391
Cable Marker Sleeve

144990391
P12-9NR: RNCC: 3 | RNVC: 2
12450289-9: RNCC: 3 | RNVC: 2
F300 0T 016 2025: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-520-3271
Cable Marker Sleeve

145203271
TMS1-8NR13S90-9: RNCC: 3 | RNVC: 9

17 May 2000

5975-14-479-1554
Cable Marker Sleeve

144791554
03520015004N: RNCC: 3 | RNVC: 2
3597470261477: RNCC: 5 | RNVC: 2
HELAVIETWIN4REPN: RNCC: 5 | RNVC: 2
352-015-N: RNCC: 5 | RNVC: 2
352015REPN: RNCC: 5 | RNVC: 2

18 Dec 1995

5975-14-421-2383
Interior Cable Rack

144212383
CF30/150: RNCC: 3 | RNVC: 2
101065: RNCC: 3 | RNVC: 9

11 Jan 1988

5975-14-374-5386
Cable Marker Sleeve

143745386
P10-3-2RG2: RNCC: 3 | RNVC: 2
P10-2: RNCC: 5 | RNVC: 2
91284013: RNCC: 5 | RNVC: 2

30 Jan 1982

5975-14-339-4407
Cable Marker Sleeve

143394407
620-844-156-0: RNCC: 3 | RNVC: 2
620-844-156-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-310-4926
Indicator Panel

143104926
A10-63-227-53-0: RNCC: 3 | RNVC: 2
A10-63-227-53-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-305-3442
Push Button

143053442
1106504-BGBG: RNCC: 3 | RNVC: 2
1106504BGBG: RNCC: 5 | RNVC: 2
B0UT0N10VERTGRAVEB: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-324-0074
Push Button

143240074
APG6010A85: RNCC: 3 | RNVC: 2
85-801-1660: RNCC: 6 | RNVC: 9

1 Jan 1975

5975-14-466-0709
Cable Marker Sleeve

144660709
PR284-48302: RNCC: 3 | RNVC: 2

27 Oct 1993

5975-14-390-8433
Cable Marker Sleeve

143908433
H085-5R0P: RNCC: 3 | RNVC: 2

1 Mar 1984

5975-14-339-3136
Cable Marker Sleeve

143393136
036200020017: RNCC: 3 | RNVC: 2
HO15-7: RNCC: 3 | RNVC: 2
H015-4V07: RNCC: 3 | RNVC: 2
H015-6V07: RNCC: 5 | RNVC: 2
362002REP7: RNCC: 5 | RNVC: 2
T286-420: RNCC: 5 | RNVC: 2
3597470043950: RNCC: 5 | RNVC: 2
362002-08REP7: RNCC: 5 | RNVC: 2
HO15-7-VIOLET: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-299-1294
Junction Box

142991294
121E63-451-10-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-305-3997
Junction Box

143053997
48-631-18-01: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-473-5406
Metallic Raceway

144735406
FQ901504VC7: RNCC: 3 | RNVC: 2
NN9015040000: RNCC: 3 | RNVC: 2
FQ901504VC7: RNCC: 5 | RNVC: 2
09650: RNCC: 5 | RNVC: 2
9-01-504-00: RNCC: 5 | RNVC: 2
NN9015040000: RNCC: 5 | RNVC: 2

31 Dec 1994

5975-14-486-5898
Junction Box

144865898
IF217-100: RNCC: 3 | RNVC: 9

26 Mar 1997

5975-14-416-7316
Cable Marker Sleeve

144167316
HT20-25BA12-050: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-527-9525
Cable Marker Sleeve

145279525
0353-0041-001REPS: RNCC: 3 | RNVC: 2

5 Dec 2001

5975-14-311-3549
Guy

143113549
NO PRIMARY REF14-311-3549: RNCC: 3 | RNVC: 2
894704: RNCC: 5 | RNVC: 9
HB-44B: RNCC: 6 | RNVC: 9

1 Jan 1974

5975-27-016-9372
Metallic Raceway

270169372
4T2-200MP: RNCC: 2 | RNVC: 1
4T2-200MP: RNCC: 2 | RNVC: 1

14 Apr 2003

5975-14-416-7271
Cable Marker Sleeve

144167271
HT15-25BA11-104: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-479-3168
Cable Collar

144793168
MAT424-0453F32: RNCC: 3 | RNVC: 2

10 Jan 1996

5975-14-409-4998
Junction Box

144094998
ST159-2AM872-12: RNCC: 3 | RNVC: 2

28 May 1986

5975-14-550-6395
Metallic Raceway

145506395
6045-164-000A: RNCC: 3 | RNVC: 2

4 Jul 2006

5975-14-311-3561
Cable Marker Sleeve

143113561
H100-35J0CHEF: RNCC: 3 | RNVC: 2
N95-35JAUNECHEF: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-386-6275
Conduit Outlet

143866275
9970-145-152: RNCC: 3 | RNVC: 2

24 Aug 1983

5975-14-541-4851
Cable Marker Sleeve

145414851
88179-2171: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-544-5040
Cable Marker Sleeve

145445040
03620050001TER: RNCC: 3 | RNVC: 2
362050-TERRE: RNCC: 5 | RNVC: 2
362050SYMBTER: RNCC: 5 | RNVC: 2
AA002117: RNCC: 6 | RNVC: 9

7 Feb 2005

5975-14-383-9761
Cable Marker Sleeve

143839761
78-15CXZ5S30LAB118JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ5S30JLAB118: RNCC: 5 | RNVC: 2
78-15CXZ5S30LAB118J: RNCC: 5 | RNVC: 2

4 May 1983

5975-14-368-5642
Cable Marker Sleeve

143685642
362007-13REP8: RNCC: 3 | RNVC: 2
M50GRISREP8: RNCC: 5 | RNVC: 2
H085-6GI8: RNCC: 5 | RNVC: 9

20 Feb 1981

5975-14-537-5655
Rigid Metal Conduit

145375655
BA6-60120: RNCC: 3 | RNVC: 2

5 Nov 2003

5975-14-368-5619
Cable Marker Sleeve

143685619
036200140072: RNCC: 3 | RNVC: 2
T286-445: RNCC: 5 | RNVC: 2
3597470142288: RNCC: 5 | RNVC: 2
362014-07REP2: RNCC: 5 | RNVC: 2
362014REP2: RNCC: 5 | RNVC: 2
M27R0UGEREP2: RNCC: 5 | RNVC: 2
H040-6RG2: RNCC: 5 | RNVC: 9

20 Feb 1981

5975-14-456-4354
Cable Marker Sleeve

144564354
H030-4V07: RNCC: 3 | RNVC: 2

2 Jul 1992

5975-14-478-9262
Cable Hanger

144789262
332A61-1246-21: RNCC: 3 | RNVC: 2

30 Nov 1995

5975-14-536-8753
Junction Box

145368753
XAP-M2202H29: RNCC: 3 | RNVC: 2

17 Sep 2003

5975-14-415-7240
Cable Marker Sleeve

144157240
SLP20-10J0RWNR: RNCC: 3 | RNVC: 2
620-867-048-0: RNCC: 5 | RNVC: 2

18 May 1987

5975-14-475-3220
Cable Marker Sleeve

144753220
HT75-35JORW043729: RNCC: 3 | RNVC: 2
HT75-35JOW043729: RNCC: 5 | RNVC: 2

29 Mar 1995

5975-14-419-0765
Cable Marker Sleeve

144190765
DR25 3-4-0-35MMMARQUE179608: RNCC: 3 | RNVC: 2
RT25-3-4-0-35MMMARQUE179608: RNCC: 3 | RNVC: 9
RT25-3-4-35MM0MARQUE179608: RNCC: 5 | RNVC: 9

30 Sep 1987

5975-14-391-4827
Junction Box

143914827
SAF6509: RNCC: 3 | RNVC: 2
SAF6509: RNCC: 5 | RNVC: 2
BJ-453A: RNCC: 6 | RNVC: 9

21 Mar 1984

5975-14-254-1088
Cable Marker Sleeve

142541088
352004SYMBP: RNCC: 3 | RNVC: 2
352004SYMB+: RNCC: 5 | RNVC: 2
HELAVIATWIN3REPSIGNEP: RNCC: 5 | RNVC: 2

1 Jan 1969

5975-33-107-4395
Interconnecting Box

331074395
W290683615200: RNCC: 3 | RNVC: 2

14 Oct 1999

5975-14-503-5060
Stuffing Tube

145035060
NNP5975924570227: RNCC: 3 | RNVC: 2

16 Jan 1998

5975-14-387-2160
Cable Marker Sleeve

143872160
78-15CXZ5S30R0UGEPLUS: RNCC: 3 | RNVC: 2
78-15CXZ5S30PLUSR: RNCC: 5 | RNVC: 2
78-15CXZ5S30PLUSROUGE: RNCC: 5 | RNVC: 2
78-15CXZ5S30RPLUS: RNCC: 5 | RNVC: 2

15 Sep 1983

5975-14-431-1911
Cable Marker Sleeve

144311911
035200070042: RNCC: 3 | RNVC: 2
352007REP2: RNCC: 5 | RNVC: 2
3597470259689: RNCC: 5 | RNVC: 2
DLT360301: RNCC: 5 | RNVC: 2

11 Apr 1989

5975-14-520-3275
Cable Marker Sleeve

145203275
TMS3-8NR12S90-9: RNCC: 3 | RNVC: 9

17 May 2000

5975-14-433-1475
Cable Marker Sleeve

144331475
ST400S58P201-153: RNCC: 3 | RNVC: 2
1-153: RNCC: 5 | RNVC: 2

11 Jul 1989

5975-14-314-5453
Junction Box

143145453
121E63-421-00-0: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-501-6651
Cable Marker Sleeve

145016651
370103-04REP9: RNCC: 3 | RNVC: 2
91633952: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-27-037-5798
Junction Box

270375798
742-80: RNCC: 5 | RNVC: 9

8 Aug 2007

5975-14-457-6952
Cable Collar

144576952
1-00403220: RNCC: 3 | RNVC: 2

15 Sep 1992

5975-14-490-0377
Switch Box Case

144900377
C24243-1: RNCC: 3 | RNVC: 2

10 Sep 1997

5975-14-364-6577
Cable Marker Sleeve

143646577
6-311: RNCC: 3 | RNVC: 2
ST400S58P205-311: RNCC: 5 | RNVC: 2
T0US58P205-311: RNCC: 5 | RNVC: 2

2 Sep 1980

5975-27-037-1224
Junction Box

270371224
BUAT 30X30: RNCC: 5 | RNVC: 9

16 Jul 2007

5975-14-520-3329
Interconnecting Box

145203329
0-0180907-0: RNCC: 3 | RNVC: 2
JH1166A00: RNCC: 3 | RNVC: 2
0-0180 907-0: RNCC: 5 | RNVC: 2

17 May 2000

5975-14-385-4055
Ground Rod

143854055
0285326110: RNCC: 3 | RNVC: 2
89238116: RNCC: 5 | RNVC: 2

26 Jul 1983

5975-14-494-0055
Ground Rod

144940055
30501005: RNCC: 3 | RNVC: 2
F300 0T 015 0143: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-445-4424
Cable Marker Sleeve

144454424
TRSA1012C1-6: RNCC: 3 | RNVC: 9

14 Feb 1991

5975-15-197-2017
Pole Step Holder

151972017
PN UAS 00032957: RNCC: 3 | RNVC: 2
5440F76029562: RNCC: 5 | RNVC: 9

2 Apr 2004

5975-15-152-1699
Blank Panel

151521699
299701560A: RNCC: 3 | RNVC: 2

9 Aug 2000

5975-15-186-9774
Blank Panel

151869774
PM327: RNCC: 3 | RNVC: 2
(241)A8746PM327: RNCC: 5 | RNVC: 2

15 Jan 2009

5975-14-431-5961
Cable Marker Sleeve

144315961
364-002-1-0: RNCC: 3 | RNVC: 2

26 Apr 1989

5975-14-299-0990
Metallic Raceway

142990990
121E63-412-00-2: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-349-8804
Junction Box Cover

143498804
1-68-203-76: RNCC: 3 | RNVC: 2

14 Jun 1978

5975-14-327-5331
Cable Marker Sleeve

143275331
036200030019: RNCC: 3 | RNVC: 2
H030-4BA9: RNCC: 3 | RNVC: 2
3597470044537: RNCC: 5 | RNVC: 2
362003-01REP9: RNCC: 5 | RNVC: 2
T286-442: RNCC: 5 | RNVC: 2
362003REP9: RNCC: 5 | RNVC: 2
M22BLANCREP9: RNCC: 5 | RNVC: 2
H030-6BA9: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-306-0832
Rigid Metal Conduit

143060832
A10-63-710-52-0: RNCC: 3 | RNVC: 2
A10-63-710-52-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-350-4087
Rigid Metal Conduit

143504087
213508: RNCC: 3 | RNVC: 2
MAF0001003354: RNCC: 6 | RNVC: 9

12 Jul 1978

5975-14-362-5991
Cable Marker Sleeve

143625991
036002010026: RNCC: 3 | RNVC: 2
3597470040256: RNCC: 5 | RNVC: 2
360101REP6: RNCC: 5 | RNVC: 2
360201REP6: RNCC: 5 | RNVC: 2
V09REP6: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-462-9926
Junction Box

144629926
46041103: RNCC: 3 | RNVC: 2

12 May 1993

5975-14-488-3268
Cable Hanger

144883268
8178645: RNCC: 3 | RNVC: 2

30 Apr 1997

5975-15-119-0870
Cable Collar

151190870
70929412: RNCC: 3 | RNVC: 2

4 Jul 1994

5975-14-307-7735
Stuffing Tube

143077735
121104: RNCC: 3 | RNVC: 2
12114: RNCC: 5 | RNVC: 2
PES011N: RNCC: 5 | RNVC: 2
25356121: RNCC: 5 | RNVC: 9

1 Jan 1974

5975-27-056-5740
Cable Marker Sleeve

270565740
517028: RNCC: 5 | RNVC: 9

11 Apr 2012

5975-14-442-6693
Cable Marker Sleeve

144426693
SLP20-10J0RJNR: RNCC: 3 | RNVC: 2

24 Oct 1990

5975-14-489-6629
Cable Hanger

144896629
332P61-5552-00: RNCC: 3 | RNVC: 2

6 Aug 1997

5975-27-006-7256
Blank Panel

270067256
YG-AKS-003-003: RNCC: 2 | RNVC: 1

6 Apr 1999

5975-14-378-5058
Cable Marker Sleeve

143785058
SLP10-6J0: RNCC: 3 | RNVC: 2

11 Aug 1982

5975-14-351-0456
Cable Marker Sleeve

143510456
7815CXZ18S30KD1238AJ: RNCC: 3 | RNVC: 2
205901-1238A: RNCC: 5 | RNVC: 2

10 Aug 1978

5975-14-485-4548
Interconnecting Box

144854548
434331: RNCC: 3 | RNVC: 2
434331-001: RNCC: 5 | RNVC: 9
KE*608: RNCC: 5 | RNVC: 9

23 Jan 1997

5975-14-379-5182
Cable Marker Sleeve

143795182
4C1204: RNCC: 3 | RNVC: 2
86-258-0121: RNCC: 6 | RNVC: 9

1 Oct 1982

5975-14-513-9346
Cable Marker Sleeve

145139346
7702-491A018: RNCC: 3 | RNVC: 2

19 Apr 1999

5975-14-339-4476
Cable Marker Sleeve

143394476
620-849-070-0: RNCC: 3 | RNVC: 2
620-849-070-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-475-3179
Cable Marker Sleeve

144753179
HT100-35JORW043710: RNCC: 3 | RNVC: 2
HT100-35JOW043710: RNCC: 5 | RNVC: 2

29 Mar 1995

5975-15-203-3825
Ground Rod

152033825
1353: RNCC: 3 | RNVC: 2
(241)AG6221353: RNCC: 5 | RNVC: 2
5950-15-E08-1353: RNCC: 5 | RNVC: 9

16 Jan 2008

5975-14-384-4031
Cable Marker Sleeve

143844031
03620009001C: RNCC: 3 | RNVC: 2
3597470047460: RNCC: 5 | RNVC: 2
362009-01REPC: RNCC: 5 | RNVC: 2
362009REPC: RNCC: 5 | RNVC: 2
M16BLANCREPC: RNCC: 5 | RNVC: 2

4 May 1983

5975-14-495-9130
Interconnecting Box

144959130
F00153339: RNCC: 3 | RNVC: 2
F00153339: RNCC: 5 | RNVC: 9
F300 0T 020 4786: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-344-2692
Junction Box Cover

143442692
607SP7-03: RNCC: 3 | RNVC: 2

10 Aug 1977

5975-14-555-1605
Stuffing Tube

145551605
539400: RNCC: 3 | RNVC: 2
BVL4: RNCC: 5 | RNVC: 2

8 Oct 2007

5975-14-338-8162
Cable Marker Sleeve

143388162
P25-4-8VR5: RNCC: 3 | RNVC: 2
P25-5: RNCC: 5 | RNVC: 2
P25VE5: RNCC: 5 | RNVC: 2

17 Dec 1976

5975-14-463-9641
Cable Marker Sleeve

144639641
620-867-452-0: RNCC: 3 | RNVC: 2

7 Jul 1993

5975-14-507-5340
Interior Cable Rack

145075340
332P68-1491-05: RNCC: 3 | RNVC: 2

16 Jul 1998

5975-14-431-6163
Cable Marker Sleeve

144316163
P30-4-8V07: RNCC: 3 | RNVC: 2
P30V07: RNCC: 5 | RNVC: 2

26 Apr 1989

5975-14-416-7433
Cable Marker Sleeve

144167433
HT20-25BA12-023: RNCC: 3 | RNVC: 2
2-023: RNCC: 5 | RNVC: 2

25 Jun 1987

5975-14-439-3244
Cable Marker Sleeve

144393244
D51900-169: RNCC: 3 | RNVC: 2

25 Apr 1990

5975-14-504-1101
Cable Marker Sleeve

145041101
TMS1-8NR12-9: RNCC: 3 | RNVC: 9

6 Feb 1998

5975-14-520-2883
Cable Marker Sleeve

145202883
HT150-50RG: RNCC: 3 | RNVC: 2

17 May 2000

5975-14-338-8159
Cable Marker Sleeve

143388159
P25-4-8RG2: RNCC: 3 | RNVC: 2
P25-2: RNCC: 5 | RNVC: 2
P25RG2: RNCC: 5 | RNVC: 2

17 Dec 1976

5975-14-508-1123
Nonmetallic Raceway

145081123
4918-3-112: RNCC: 3 | RNVC: 2

26 Aug 1998

5975-27-020-8770
Guide Rail

270208770
1010FK-1911210: RNCC: 2 | RNVC: 1
1010FK1911210: RNCC: 2 | RNVC: 1

15 Dec 2003

5975-27-026-0486
Junction Box

270260486
42003: RNCC: 2 | RNVC: 1
42003: RNCC: 5 | RNVC: 9
BUAT 12X12 CM: RNCC: 5 | RNVC: 9

26 May 2005

5975-14-377-0212
Cable Marker Sleeve

143770212
TMS-1/4-48MM-9: RNCC: 3 | RNVC: 9
TMS1/4-48MMBLANC: RNCC: 5 | RNVC: 9
85-692-1413: RNCC: 6 | RNVC: 9

28 Apr 1982

5975-14-386-5066
Cable Marker Sleeve

143865066
320-047-201-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5975-14-473-9378
Cable Marker Sleeve

144739378
03690001004B: RNCC: 3 | RNVC: 2
3597470053331: RNCC: 5 | RNVC: 2
369001REPB: RNCC: 5 | RNVC: 2
M-65-M2REPB: RNCC: 5 | RNVC: 2
782114003843: RNCC: 5 | RNVC: 2
782114003843: RNCC: 5 | RNVC: 9

18 Jan 1995

5975-14-524-6810
Junction Box

145246810
23RNSW400000027PL2/2.PAGE18: RNCC: 3 | RNVC: 2
5DP55-I5P55: RNCC: 3 | RNVC: 2
SYB2993: RNCC: 5 | RNVC: 2
I5P55: RNCC: 5 | RNVC: 2

4 Apr 2001

5975-14-326-6558
Junction Box

143266558
4DP644PE2: RNCC: 3 | RNVC: 2
4DP64-4PE2: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-350-1463
Stuffing Tube Plug

143501463
5975CA0B6: RNCC: 2 | RNVC: 2
509640: RNCC: 3 | RNVC: 2
350967: RNCC: 5 | RNVC: 2
5975CA-OB6: RNCC: 5 | RNVC: 2

14 Jun 1978

5975-14-545-9746
Cable Marker Sleeve

145459746
03740140004Y: RNCC: 3 | RNVC: 2
03740140004Y: RNCC: 5 | RNVC: 2
6070-GT-0000119: RNCC: 5 | RNVC: 9

31 May 2005

5975-14-356-9227
Cable Marker Sleeve

143569227
036002040053: RNCC: 3 | RNVC: 2
3597470040584: RNCC: 5 | RNVC: 2
360104REP3: RNCC: 5 | RNVC: 2
360204REP3: RNCC: 5 | RNVC: 2
V22-0RANGEREP3: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-364-4786
Cable Marker Sleeve

143644786
78-15CXZ1-5S20-38-37J: RNCC: 3 | RNVC: 2
78-15CXZ1-5S20-38-37JAUNE: RNCC: 5 | RNVC: 2

2 Sep 1980

5975-14-431-5964
Cable Marker Sleeve

144315964
364-002-1-3: RNCC: 3 | RNVC: 2

26 Apr 1989

5975-14-475-3189
Cable Marker Sleeve

144753189
HT100-35JORW043740: RNCC: 3 | RNVC: 2
HT100-35JOW043740: RNCC: 5 | RNVC: 2

29 Mar 1995

5975-14-431-5967
Cable Marker Sleeve

144315967
364-002-1-6: RNCC: 3 | RNVC: 2

26 Apr 1989

5975-14-349-6730
Junction Box

143496730
12D93SMA1PE3-6PE2: RNCC: 3 | RNVC: 2
12D93SMA1PE36PE2: RNCC: 3 | RNVC: 2

22 May 1978

5975-14-449-2450
Blank Panel

144492450
NO PRIMARY REF14-449-2450: RNCC: 3 | RNVC: 2
232314: RNCC: 5 | RNVC: 2

7 Aug 1991

5975-14-540-1691
Junction Box

145401691
29630253-00: RNCC: 3 | RNVC: 2
29630253-1: RNCC: 5 | RNVC: 2

11 Mar 2004

5975-14-520-7786
Raceway Cover

145207786
192E332-00: RNCC: 3 | RNVC: 2
192E332-00: RNCC: 5 | RNVC: 2

14 Jun 2000

5975-14-264-8077
Stuffing Tube

142648077
603600: RNCC: 3 | RNVC: 2
1001-603600: RNCC: 5 | RNVC: 2
10360: RNCC: 5 | RNVC: 2
22360: RNCC: 5 | RNVC: 2
60360: RNCC: 5 | RNVC: 2
N0RMADIX36: RNCC: 5 | RNVC: 2
N36: RNCC: 5 | RNVC: 2
91346727: RNCC: 5 | RNVC: 2
603600: RNCC: 5 | RNVC: 2

1 Jan 1970

5975-14-416-6706
Cable Marker Sleeve

144166706
P12-3-2J0RZNR: RNCC: 3 | RNVC: 2
P12-3-2JOZ: RNCC: 5 | RNVC: 2
12450751-3: RNCC: 5 | RNVC: 2

25 Jun 1987

5975-27-028-4036
Raceway Cover

270284036
5975-TJ1-06338: RNCC: 5 | RNVC: 9

28 Dec 2005

5975-14-412-1332
Cable Marker Sleeve

144121332
P15-3-2GI8: RNCC: 3 | RNVC: 2
P15GI8: RNCC: 5 | RNVC: 2
12450298-5: RNCC: 5 | RNVC: 2
P15-8: RNCC: 5 | RNVC: 2

8 Oct 1986

5975-14-476-1389
Cable Marker Sleeve

144761389
HOI50-4RO-E: RNCC: 3 | RNVC: 2
HOI50-RO-E: RNCC: 3 | RNVC: 2
0617172: RNCC: 5 | RNVC: 2
HOI50-E: RNCC: 5 | RNVC: 2
HOI50-E-ROSE: RNCC: 5 | RNVC: 2

24 May 1995

5975-14-330-6677
Cable Marker Sleeve

143306677
120872: RNCC: 3 | RNVC: 2
120872A: RNCC: 3 | RNVC: 2
120872: RNCC: 5 | RNVC: 9
85-688-3865: RNCC: 6 | RNVC: 9

2 Jul 1975

5975-14-416-7214
Cable Marker Sleeve

144167214
HT15-25BA11-025: RNCC: 3 | RNVC: 2
1-025: RNCC: 5 | RNVC: 2
1025: RNCC: 5 | RNVC: 9

25 Jun 1987

5975-14-383-9533
Cable Marker Sleeve

143839533
78-15CXZ5S30LAB122JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ5S30JLAB122: RNCC: 5 | RNVC: 2
78-15CXZ5S30LAB122J: RNCC: 5 | RNVC: 2

4 May 1983

5975-14-452-8621
Junction Box

144528621
10-243-003-01: RNCC: 3 | RNVC: 2

22 Jan 1992

5975-14-416-7262
Cable Marker Sleeve

144167262
HT15-25BA11-093: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-442-6694
Cable Marker Sleeve

144426694
SLP20-10J0RLNR: RNCC: 3 | RNVC: 2

24 Oct 1990

5975-14-416-7289
Cable Marker Sleeve

144167289
HT20-25BA12-022: RNCC: 3 | RNVC: 2
2-022: RNCC: 5 | RNVC: 2

25 Jun 1987

5975-14-526-6631
Stuffing Tube

145266631
222074: RNCC: 3 | RNVC: 2

17 Aug 2001

5975-15-109-4090
Junction Box Cover

151094090
5139-007-18: RNCC: 3 | RNVC: 2

20 Sep 1991

5975-14-501-5812
Metallic Raceway

145015812
46158796: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-14-383-9510
Cable Marker Sleeve

143839510
78-15CXZ5S30LAB168JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ5S30LAB168J: RNCC: 5 | RNVC: 2
78-15CXZ5S30JLAB168: RNCC: 5 | RNVC: 2

4 May 1983

5975-14-306-0850
Junction Box Cover

143060850
A10-63-432-10-0: RNCC: 3 | RNVC: 2
A10-63-432-10-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-278-3595
Rigid Metal Conduit

142783595
160-79221-08: RNCC: 3 | RNVC: 2

1 Jan 1971

5975-14-431-5968
Cable Marker Sleeve

144315968
364-002-1-7: RNCC: 3 | RNVC: 2

26 Apr 1989

5975-14-539-6026
Interconnecting Box

145396026
730010S511-00A: RNCC: 3 | RNVC: 2
730010S511-00A: RNCC: 5 | RNVC: 9

23 Jan 2004

5975-14-513-1867
Interconnecting Box

145131867
128-58: RNCC: 3 | RNVC: 2
128-58-02: RNCC: 3 | RNVC: 2
128-58-04: RNCC: 3 | RNVC: 2
F300 0T 018 3010: RNCC: 6 | RNVC: 9

9 Mar 1999

5975-14-541-6513
Interconnecting Box

145416513
330A11-1295-00: RNCC: 3 | RNVC: 2

17 Jun 2004

5975-14-416-7337
Cable Marker Sleeve

144167337
HT30-25BA13-006: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-536-9915
Metallic Raceway

145369915
5010579481: RNCC: 3 | RNVC: 2
IF-192-0304: RNCC: 5 | RNVC: 9

24 Sep 2003

5975-33-107-1392
Junction Box

331071392
613001802: RNCC: 3 | RNVC: 2
PCAMI/RP/0361300182: RNCC: 6 | RNVC: 9

30 Jun 1999

5975-14-452-3855
Cable Collar

144523855
51-60-10: RNCC: 3 | RNVC: 2

8 Jan 1992

5975-14-442-6769
Cable Marker Sleeve

144426769
620-867-064-0: RNCC: 3 | RNVC: 2

24 Oct 1990

5975-14-339-4423
Cable Marker Sleeve

143394423
SLP15-10J0R1NR: RNCC: 3 | RNVC: 2
620-849-001-0: RNCC: 5 | RNVC: 2
620-849-001-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-527-9523
Cable Marker Sleeve

145279523
0353-0041-001REPP: RNCC: 3 | RNVC: 2

5 Dec 2001

5975-14-358-7312
Stuffing Tube Plug

143587312
2339-242-30: RNCC: 3 | RNVC: 2
2339-242-30: RNCC: 5 | RNVC: 9

7 Sep 1979

5975-15-164-4520
Cable Collar

151644520
RC0315199F01: RNCC: 3 | RNVC: 2
RC0315199F01: RNCC: 5 | RNVC: 9

1 Nov 2002

5975-14-464-2547
Cable Crosshead

144642547
SMCFAATB0010: RNCC: 3 | RNVC: 2

28 Jul 1993

5975-14-410-9213
Conduit Outlet

144109213
226917: RNCC: 3 | RNVC: 2

23 Jul 1986

5975-14-401-5555
Junction Box

144015555
ST159-2M872-12-01: RNCC: 3 | RNVC: 2

13 Jun 1985

5975-14-501-8692
Junction Box

145018692
1DP52-2PE1: RNCC: 3 | RNVC: 2
1DP522PE1: RNCC: 3 | RNVC: 2

17 Nov 1997

5975-14-306-0846
Junction Box

143060846
A10-63-435-10-0: RNCC: 3 | RNVC: 2
A10-63-435-10-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-27-009-9278
Junction Box

270099278
57110800: RNCC: 2 | RNVC: 1
571-10-800: RNCC: 2 | RNVC: 1

11 Oct 2001

5975-14-462-5949
Stuffing Tube

144625949
221000: RNCC: 3 | RNVC: 2
RAR4711: RNCC: 5 | RNVC: 2
1009-221000: RNCC: 5 | RNVC: 2

28 Apr 1993

5975-14-356-6535
Runner

143566535
EA1M661-10-802: RNCC: 3 | RNVC: 2

15 May 1979

5975-27-021-0384
Nonmetallic Raceway

270210384
5975-00111-00024: RNCC: 2 | RNVC: 1

15 Dec 2003

5975-14-238-2692
Cable Marker Sleeve

142382692
99001654: RNCC: 3 | RNVC: 2
035200030041: RNCC: 3 | RNVC: 2
99001654: RNCC: 5 | RNVC: 2
352-03REP1: RNCC: 5 | RNVC: 2
352003REP1: RNCC: 5 | RNVC: 2
HELAVIATWIN2REP1: RNCC: 5 | RNVC: 2
352003REP1: RNCC: 5 | RNVC: 2
99001654: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-350-1437
Stuffing Tube

143501437
5975CABVL7: RNCC: 2 | RNVC: 2
539700: RNCC: 3 | RNVC: 2
53970: RNCC: 5 | RNVC: 2
5975CA-BVL7: RNCC: 5 | RNVC: 2

14 Jun 1978

5975-14-394-1750
Conduit Outlet

143941750
089126: RNCC: 3 | RNVC: 2
89126: RNCC: 5 | RNVC: 2
174-4650: RNCC: 5 | RNVC: 2
3245060891268: RNCC: 5 | RNVC: 2
891-26: RNCC: 5 | RNVC: 2
LG89126: RNCC: 5 | RNVC: 9
5313096: RNCC: 5 | RNVC: 9

23 Jun 1984

5975-14-545-9712
Cable Marker Sleeve

145459712
03740140004H: RNCC: 3 | RNVC: 2
03740140004H: RNCC: 5 | RNVC: 2
6070-GT-0000099: RNCC: 5 | RNVC: 2

31 May 2005

5975-14-545-9112
Cable Marker Sleeve

145459112
03740150004X: RNCC: 3 | RNVC: 2
03740150004X: RNCC: 5 | RNVC: 2
6070-GT-0000050: RNCC: 5 | RNVC: 9

26 May 2005

5975-14-350-1403
Stuffing Tube

143501403
5975CABVP3: RNCC: 2 | RNVC: 2
534302: RNCC: 3 | RNVC: 2
PEMAFBV3: RNCC: 5 | RNVC: 2
53432: RNCC: 5 | RNVC: 2
5975CA-BVP3: RNCC: 5 | RNVC: 2
BVP3: RNCC: 5 | RNVC: 2

14 Jun 1978

5975-15-156-8897
Electrical Rosette

151568897
BFG20-AD-B1 XTO-3: RNCC: 3 | RNVC: 2

10 Mar 2003

5975-14-545-9063
Cable Marker Sleeve

145459063
03740150004L: RNCC: 3 | RNVC: 2
03740150004L: RNCC: 5 | RNVC: 2
6070-GT-0000038: RNCC: 5 | RNVC: 9

26 May 2005

5975-14-440-8612
Cable Marker Sleeve

144408612
036201500044: RNCC: 3 | RNVC: 2
T286-477: RNCC: 5 | RNVC: 2
3597470142851: RNCC: 5 | RNVC: 2
362050-04REP4: RNCC: 5 | RNVC: 2
362150REP4: RNCC: 5 | RNVC: 2
M65JAUNEREP4: RNCC: 5 | RNVC: 2

31 Jul 1990

5975-14-395-6242
Stuffing Tube

143956242
A588-10-6: RNCC: 3 | RNVC: 2
NA588-10-6: RNCC: 5 | RNVC: 2

30 Oct 1984

5975-14-383-3260
Conduit Outlet

143833260
NO PRIMARY REF14-383-3260: RNCC: 3 | RNVC: 2
148190-17: RNCC: 5 | RNVC: 2
206-0346-9: RNCC: 5 | RNVC: 9

11 Apr 1983

5975-15-009-0030
Blank Panel

150090030
132-0211/01: RNCC: 3 | RNVC: 2

29 Apr 1999

5975-14-382-6252
Cable Marker Sleeve

143826252
96080528: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-33-003-6248
Junction Box

330036248
92252: RNCC: 3 | RNVC: 2

25 May 1998

5975-14-480-2088
Insulator Bracket

144802088
AK2-LD02: RNCC: 3 | RNVC: 2
3389110570311: RNCC: 5 | RNVC: 2

28 Feb 1996

5975-14-392-4226
Push Button

143924226
1DP40-2PE1-22B2FTJ22TCEN22P20G: RNCC: 3 | RNVC: 2

21 Mar 1984

5975-14-438-8990
Cable Hanger

144388990
332A61-6114-00: RNCC: 3 | RNVC: 2

11 Apr 1990

5975-14-425-4681
Cable Marker Sleeve

144254681
29366566: RNCC: 3 | RNVC: 2
29366566: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-14-550-0124
Cable Hanger

145500124
EA6M702-34-970: RNCC: 3 | RNVC: 2

24 May 2006

5975-14-480-9420
Junction Box

144809420
45281699: RNCC: 3 | RNVC: 2
45281699: RNCC: 3 | RNVC: 9

11 Apr 1996

5975-14-394-9057
Nonmetallic Raceway

143949057
13000: RNCC: 3 | RNVC: 2
G020X25C: RNCC: 5 | RNVC: 2

2 Oct 1984

5975-14-317-3409
Cable Marker Sleeve

143173409
0084052020: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-458-0020
Interconnecting Box

144580020
271458: RNCC: 3 | RNVC: 2
271458: RNCC: 5 | RNVC: 9

2 Oct 1992

5975-14-322-8875
Cable Marker Sleeve

143228875
0084052980: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-284-6584
Cable Marker Sleeve

142846584
9132209: RNCC: 3 | RNVC: 2
9132209: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-420-7484
Cable Marker Sleeve

144207484
ST400S58P201-156: RNCC: 3 | RNVC: 2
1-156: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-258-8538
Guy

142588538
301960: RNCC: 3 | RNVC: 2
HB-22A: RNCC: 6 | RNVC: 9

1 Jan 1969

5975-14-254-1162
Cable Marker Sleeve

142541162
03520004004O: RNCC: 3 | RNVC: 2
352004REPO: RNCC: 5 | RNVC: 2
HELAVIA-TWIN3REPO: RNCC: 5 | RNVC: 2
91280059: RNCC: 5 | RNVC: 2
RAR4646: RNCC: 5 | RNVC: 2
91280059: RNCC: 5 | RNVC: 9
91280059: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-400-5468
Conduit Outlet

144005468
3803-61-361: RNCC: 3 | RNVC: 2

6 May 1985

5975-14-421-2272
Stuffing Tube

144212272
2059932: RNCC: 3 | RNVC: 2

11 Jan 1988

5975-14-518-4007
Stuffing Tube

145184007
08040511: RNCC: 3 | RNVC: 2

4 Feb 2000

5975-14-449-6155
Cable Marker Sleeve

144496155
ML1140F00: RNCC: 3 | RNVC: 2

28 Aug 1991

5975-14-371-6922
Junction Box

143716922
992044: RNCC: 3 | RNVC: 2
992044: RNCC: 5 | RNVC: 9

5 Aug 1981

5975-14-420-6347
Junction Box

144206347
B113283: RNCC: 3 | RNVC: 2

16 Dec 1987

5975-14-487-0713
Junction Box

144870713
45505480: RNCC: 3 | RNVC: 2

2 Apr 1997

5975-14-500-9309
Junction Box

145009309
D68401100000: RNCC: 3 | RNVC: 2
F300 0T 024 9521: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-27-017-7151
Metallic Raceway

270177151
RKP 40200: RNCC: 2 | RNVC: 1
RKP 40200: RNCC: 2 | RNVC: 1
RKP 40200: RNCC: 5 | RNVC: 2

22 Aug 2003

5975-14-284-3895
Cable Marker Sleeve

142843895
352001SYMBTERRE: RNCC: 3 | RNVC: 2
HELAVIATWIN0SYMBTERRE: RNCC: 5 | RNVC: 2

1 Jan 1972

5975-27-015-5928
Pothead

270155928
50041YP0107: RNCC: 2 | RNVC: 1

10 Dec 2002

5975-14-548-2526
Blank Panel

145482526
F1262673: RNCC: 3 | RNVC: 2

16 Dec 2005

5975-14-468-8113
Cable Marker Sleeve

144688113
SLP20-10BU: RNCC: 3 | RNVC: 2
620-867-372-0: RNCC: 5 | RNVC: 2

23 Mar 1994

5975-14-386-5044
Cable Marker Sleeve

143865044
320-046-801-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5975-14-404-9346
Junction Box

144049346
BJ2688-0101: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-465-8265
Cable Marker Sleeve

144658265
PR167-48302: RNCC: 3 | RNVC: 2

14 Oct 1993

5975-14-541-5213
Interconnecting Box

145415213
1091522-001: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-204-7521
Cable Collar

142047521
634-1531: RNCC: 3 | RNVC: 2
830A: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-14-470-9087
Cable Marker Sleeve

144709087
735070-01REPM: RNCC: 3 | RNVC: 2
782114012643: RNCC: 5 | RNVC: 2
782114012643: RNCC: 5 | RNVC: 9

13 Jul 1994

5975-14-254-1186
Cable Marker Sleeve

142541186
352005REPN: RNCC: 3 | RNVC: 2
HELAVIATWIN4REPN: RNCC: 5 | RNVC: 2

1 Jan 1969

5975-14-383-0534
Cable Marker Sleeve

143830534
16899846: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-33-103-5025
Conduit Outlet

331035025
4505: RNCC: 3 | RNVC: 2

24 Apr 1995

5975-14-488-8882
Guide Rail

144888882
PS4175: RNCC: 3 | RNVC: 2

11 Jun 1997

5975-14-545-0651
Guide Rail

145450651
10551878: RNCC: 3 | RNVC: 2
10551878: RNCC: 3 | RNVC: 9

16 Mar 2005

5975-14-515-4073
Cable Marker Sleeve

145154073
21300083A: RNCC: 3 | RNVC: 2

13 Jul 1999

5975-14-459-7826
Interconnecting Box

144597826
TB3011104: RNCC: 3 | RNVC: 2

17 Dec 1992

5975-15-194-1689
Blank Panel

151941689
9597 480 03007: RNCC: 3 | RNVC: 2
(241)A0042959748003007: RNCC: 5 | RNVC: 2

28 Sep 2010

5975-14-256-6456
Guy

142566456
MARJ213: RNCC: 3 | RNVC: 2
7542-1: RNCC: 5 | RNVC: 2

1 Jan 1969

5975-14-330-5120
Stuffing Tube

143305120
412862-2: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-426-4882
Cable Marker Sleeve

144264882
WBS3-4-8: RNCC: 3 | RNVC: 2

1 Sep 1988

5975-14-466-0744
Cable Marker Sleeve

144660744
PR73-48266: RNCC: 3 | RNVC: 2

27 Oct 1993

5975-14-416-1065
Cable Marker Sleeve

144161065
H050-25BU1: RNCC: 3 | RNVC: 2
HELSYN100H50BLEU: RNCC: 5 | RNVC: 9

3 Jun 1987

5975-14-501-9431
Cable Hanger

145019431
332A61-3731-00: RNCC: 3 | RNVC: 2

19 Nov 1997

5975-14-416-7424
Cable Marker Sleeve

144167424
HT20-25BA12-008: RNCC: 3 | RNVC: 2
2-008: RNCC: 5 | RNVC: 2

25 Jun 1987

5975-14-416-7230
Cable Marker Sleeve

144167230
HT15-25BA11-051: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-501-5807
Metallic Raceway

145015807
45158795: RNCC: 3 | RNVC: 2
45158795: RNCC: 3 | RNVC: 9

5 Nov 1997

5975-14-388-5103
Stuffing Tube

143885103
539800: RNCC: 3 | RNVC: 2

3 Nov 1983

5975-14-466-4868
Interconnecting Box

144664868
3135208: RNCC: 3 | RNVC: 9
70CJ702L1016A: RNCC: 6 | RNVC: 9

15 Nov 1993

5975-14-513-8925
Interconnecting Box

145138925
278028: RNCC: 3 | RNVC: 2

14 Apr 1999

5975-14-465-8570
Junction Box

144658570
5010096408: RNCC: 3 | RNVC: 2

14 Oct 1993

5975-14-549-1286
Crossarm Brace

145491286
SP206654: RNCC: 3 | RNVC: 2

2 Mar 2006

5975-14-498-9081
Junction Box

144989081
1190141000000: RNCC: 3 | RNVC: 2
5000294256: RNCC: 5 | RNVC: 9
F300 0T 011 3578: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-415-7235
Cable Marker Sleeve

144157235
SLP20-10J0RRNR: RNCC: 3 | RNVC: 2
620-867-043-0: RNCC: 5 | RNVC: 2

18 May 1987

5975-14-539-1860
Blank Panel

145391860
40304-074: RNCC: 3 | RNVC: 2

11 Dec 2003

5975-14-402-4095
Cable Marker Sleeve

144024095
01PR0TMS4W3-8: RNCC: 1 | RNVC: 2
TMS3-8NR13U9: RNCC: 3 | RNVC: 2
HS095WE4DSU: RNCC: 5 | RNVC: 2
TMS3-8NR13U9: RNCC: 5 | RNVC: 9
TMSSCE2X3-8S3-9: RNCC: 5 | RNVC: 9

3 Jul 1985

5975-14-379-7977
Junction Box

143797977
15032800: RNCC: 3 | RNVC: 2

20 Oct 1982

5975-14-522-2553
Junction Box

145222553
10599642: RNCC: 3 | RNVC: 2

13 Oct 2000

5975-14-429-8862
Nonmetallic Raceway

144298862
572572: RNCC: 3 | RNVC: 2

15 Feb 1989

5975-14-449-5778
Cable Marker Sleeve

144495778
03640002004-: RNCC: 3 | RNVC: 2
364002SYMB-: RNCC: 5 | RNVC: 2
364002SYMBM: RNCC: 5 | RNVC: 2
3597470050118: RNCC: 5 | RNVC: 2

27 Aug 1991

5975-14-384-6632
Cable Marker Sleeve

143846632
96080787: RNCC: 3 | RNVC: 2

2 Jun 1983

5975-14-459-1449
Cable Marker Sleeve

144591449
39211986: RNCC: 3 | RNVC: 2

19 Nov 1992

5975-14-382-9259
Nonmetallic Raceway

143829259
4770202440: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-510-7764
Conduit Outlet

145107764
80900358: RNCC: 3 | RNVC: 2

12 Nov 1998

5975-14-510-7762
Conduit Outlet

145107762
80900352: RNCC: 3 | RNVC: 2

12 Nov 1998

5975-14-554-8095
Cable Hanger

145548095
252436143: RNCC: 3 | RNVC: 2

28 Aug 2007

5975-14-337-0353
Nonmetallic Raceway

143370353
G020X25A36: RNCC: 3 | RNVC: 2
77069005: RNCC: 5 | RNVC: 2
91359944: RNCC: 5 | RNVC: 2

7 Oct 1976

5975-14-543-1520
Cable Marker Sleeve

145431520
860744: RNCC: 3 | RNVC: 9

26 Aug 2004

5975-14-508-0098
Cable Marker Sleeve

145080098
025260-1025-03: RNCC: 3 | RNVC: 2
9398083079: RNCC: 5 | RNVC: 9

26 Aug 1998

5975-14-534-1141
Interior Cable Rack

145341141
332P61-5474-10: RNCC: 3 | RNVC: 2

12 Mar 2003

5975-14-524-6653
Blank Panel

145246653
32-875-400: RNCC: 3 | RNVC: 2
32-875-400: RNCC: 5 | RNVC: 9

3 Apr 2001

5975-14-305-3441
Push Button

143053441
1106504-AGBG: RNCC: 3 | RNVC: 2
1106504AGBG: RNCC: 5 | RNVC: 2
B0UT0N10VERTGRAVEA: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-518-0320
Interconnecting Box

145180320
5010330834: RNCC: 3 | RNVC: 2

21 Jan 2000

5975-14-238-2845
Cable Marker Sleeve

142382845
035200060044: RNCC: 3 | RNVC: 2
352006REP4: RNCC: 5 | RNVC: 2
HELAVIATWIN5REP4: RNCC: 5 | RNVC: 2
99024048: RNCC: 5 | RNVC: 2
99024048: RNCC: 5 | RNVC: 9
99024048: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-322-8878
Cable Marker Sleeve

143228878
0084052550: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-304-2565
Stuffing Tube

143042565
TH20C329: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-27-056-5702
Cable Marker Sleeve

270565702
517033: RNCC: 5 | RNVC: 9

11 Apr 2012

5975-14-554-5978
Cable Marker Sleeve

145545978
0084302060: RNCC: 3 | RNVC: 2

24 Jul 2007

5975-27-021-6459
Junction Box Cover

270216459
BUAT KAPAGI: RNCC: 2 | RNVC: 1
45025: RNCC: 2 | RNVC: 1
45025: RNCC: 5 | RNVC: 2

21 Dec 2003

5975-33-103-4984
Conduit Outlet

331034984
6029 205 560: RNCC: 3 | RNVC: 2
195840: RNCC: 3 | RNVC: 2
195840: RNCC: 5 | RNVC: 2

11 Jul 1995

5975-14-439-5281
Metallic Raceway

144395281
1369407: RNCC: 3 | RNVC: 2
KACH407: RNCC: 5 | RNVC: 2

11 May 1990

5975-33-002-3257
Blank Panel

330023257
115.12.02: RNCC: 3 | RNVC: 2

22 Aug 1994

5975-14-372-1000
Conduit Outlet

143721000
63573: RNCC: 3 | RNVC: 2
99063573000: RNCC: 5 | RNVC: 9

1 Sep 1981

5975-14-356-9207
Cable Marker Sleeve

143569207
03600104015J: RNCC: 3 | RNVC: 2
360104REPJ: RNCC: 5 | RNVC: 2
3597470036495: RNCC: 5 | RNVC: 2
V22REPJ: RNCC: 5 | RNVC: 2

15 May 1979

5975-15-156-8896
Electrical Rosette

151568896
BFG20-AD-D1 XTO-220: RNCC: 3 | RNVC: 2

10 Mar 2003

5975-14-520-2283
Cable Hanger

145202283
HDPU15IN0X: RNCC: 3 | RNVC: 2

17 May 2000

5975-14-402-1065
Cable Marker Sleeve

144021065
401573: RNCC: 3 | RNVC: 2
BGE401573: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-520-3535
Cable Marker Sleeve

145203535
40503237: RNCC: 3 | RNVC: 2

17 May 2000

5975-14-365-0250
Conduit Outlet

143650250
14313: RNCC: 3 | RNVC: 2

2 Sep 1980

5975-14-354-7133
Push Button

143547133
70719503: RNCC: 3 | RNVC: 2
70719503: RNCC: 5 | RNVC: 2
SAF70719503: RNCC: 5 | RNVC: 9

20 Feb 1979

5975-15-200-5929
Raceway Elbow

152005929
780011: RNCC: 3 | RNVC: 2
(241)AD751780011: RNCC: 5 | RNVC: 2

1 Feb 2006

5975-27-051-0800
Chassis Base

270510800
UZK22: RNCC: 2 | RNVC: 1

30 Sep 2010

5975-14-553-4178
Metallic Raceway

145534178
T882A4003106: RNCC: 3 | RNVC: 2

2 Apr 2007

5975-14-366-1886
Junction Box Cover

143661886
349-1-2-7: RNCC: 3 | RNVC: 2

4 Nov 1980

5975-14-420-7475
Cable Marker Sleeve

144207475
ST400S58P201-098: RNCC: 3 | RNVC: 2
1-098: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-33-203-0691
Insulator Bracket

332030691
APLM-43: RNCC: 3 | RNVC: 2

27 Jan 2004

5975-14-466-0703
Cable Marker Sleeve

144660703
PR179-48302: RNCC: 3 | RNVC: 2

27 Oct 1993

5975-14-287-0738
Cable Marker Sleeve

142870738
MGCM3BA10-16: RNCC: 3 | RNVC: 2
9554819160: RNCC: 5 | RNVC: 2
MGCM3BA10-16: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-391-1617
Junction Box

143911617
NO PRIMARY REF14-391-1617: RNCC: 3 | RNVC: 2
27206: RNCC: 5 | RNVC: 2

1 Mar 1984

5975-14-470-2686
Conduit Outlet

144702686
1312-324-000: RNCC: 3 | RNVC: 2
1312-324-000: RNCC: 5 | RNVC: 2

10 Jun 1994

5975-14-213-0068
Ground Rod

142130068
4402: RNCC: 3 | RNVC: 2
SDM4402: RNCC: 5 | RNVC: 9
4402: RNCC: 5 | RNVC: 9

1 Jan 1964

5975-14-362-6043
Cable Marker Sleeve

143626043
03600101015S: RNCC: 3 | RNVC: 2
3597470035290: RNCC: 5 | RNVC: 2
V09REPS: RNCC: 5 | RNVC: 2
360101REPS: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-404-8397
Cable Marker Sleeve

144048397
29747498: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-522-6207
Stuffing Tube

145226207
F0036009: RNCC: 3 | RNVC: 2

8 Nov 2000

5975-14-501-9442
Cable Hanger

145019442
332A76-3646-00: RNCC: 3 | RNVC: 2

19 Nov 1997

5975-14-465-8264
Cable Marker Sleeve

144658264
PR166-48302: RNCC: 3 | RNVC: 2

14 Oct 1993

5975-33-161-1913
Junction Box

331611913
5975-000630: RNCC: 3 | RNVC: 2

27 Apr 1995

5975-14-434-1742
Cable Marker Sleeve

144341742
HTMS3/32-48MM: RNCC: 3 | RNVC: 9

11 Sep 1989

5975-33-200-6201
Stuffing Tube

332006201
IN-050-1977/78-E04I.CC10: RNCC: 3 | RNVC: 2

7 Feb 2002

5975-14-393-8893
Metallic Raceway

143938893
366A87-1025-2801: RNCC: 3 | RNVC: 2

23 Jun 1984

5975-14-371-3217
Cable Marker Sleeve

143713217
362107-01REP9: RNCC: 3 | RNVC: 2
V40-01REP9: RNCC: 5 | RNVC: 2
BBZ2136: RNCC: 5 | RNVC: 2

5 Aug 1981

5975-14-416-7272
Cable Marker Sleeve

144167272
HT15-25BA11-105: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-453-4943
Cable Marker Sleeve

144534943
353042-01REPW: RNCC: 3 | RNVC: 2

24 Feb 1992

5975-14-475-7038
Junction Box

144757038
XAP-M2502: RNCC: 3 | RNVC: 2
3389110312867: RNCC: 5 | RNVC: 2

26 Apr 1995

5975-14-456-6416
Interior Cable Rack

144566416
BXLO000ACH001-1500X400: RNCC: 3 | RNVC: 2

16 Jul 1992

5975-14-393-5273
Cable Marker Sleeve

143935273
360110REP5: RNCC: 3 | RNVC: 2
HOI85-5VR-5: RNCC: 3 | RNVC: 2
HOI85-VR-5: RNCC: 3 | RNVC: 2
V65REP5: RNCC: 5 | RNVC: 2
H0I85-5: RNCC: 5 | RNVC: 2
H0I85-5-VERT: RNCC: 5 | RNVC: 2
HOI85-5-5: RNCC: 5 | RNVC: 2
0617153: RNCC: 5 | RNVC: 2

7 Apr 1984

5975-14-374-5397
Cable Marker Sleeve

143745397
P20-4-8V07: RNCC: 3 | RNVC: 2
P20-7: RNCC: 5 | RNVC: 2
P20V07: RNCC: 5 | RNVC: 2
91284028: RNCC: 5 | RNVC: 2

30 Jan 1982

5975-15-122-1151
Blank Panel

151221151
178-0109/00: RNCC: 3 | RNVC: 2

10 May 1996

5975-14-371-3528
Junction Box

143713528
70390: RNCC: 3 | RNVC: 2

5 Aug 1981

5975-14-554-5960
Cable Marker Sleeve

145545960
0084301050: RNCC: 3 | RNVC: 2

23 Jul 2007

5975-14-496-8786
Interconnecting Box

144968786
10718901: RNCC: 3 | RNVC: 2
F300 0T 022 2277: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-425-2339
Blank Panel

144252339
38506474: RNCC: 3 | RNVC: 2
38506474: RNCC: 5 | RNVC: 9

24 Jun 1988

5975-14-520-1775
Interconnecting Box

145201775
40503020: RNCC: 3 | RNVC: 2

17 May 2000

5975-14-437-5313
Interconnecting Box

144375313
10213301: RNCC: 3 | RNVC: 2
536202: RNCC: 5 | RNVC: 2

7 Feb 1990

5975-14-416-7354
Cable Marker Sleeve

144167354
HT30-25BA13-035: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-477-0335
Interconnecting Box

144770335
1669-000-001: RNCC: 3 | RNVC: 2
RAR4728: RNCC: 5 | RNVC: 2
W1669-KL2-115: RNCC: 5 | RNVC: 2

19 Jul 1995

5975-14-541-2692
Cable Hanger

145412692
TPMU-17: RNCC: 3 | RNVC: 2

26 May 2004

5975-14-435-9873
Junction Box

144359873
BJ2688-0201: RNCC: 3 | RNVC: 2

29 Nov 1989

5975-15-158-0189
Cable Marker Sleeve

151580189
47915A126410: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-356-9166
Cable Marker Sleeve

143569166
03600103015D: RNCC: 3 | RNVC: 2
3597470035962: RNCC: 5 | RNVC: 2
360103REPD: RNCC: 5 | RNVC: 2
V16REPD: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-465-3532
Cable Marker Sleeve

144653532
ST406M52P897: RNCC: 3 | RNVC: 2

22 Sep 1993

5975-14-413-2465
Blank Panel

144132465
3148738: RNCC: 3 | RNVC: 2

26 Nov 1986

5975-14-461-2451
Junction Box

144612451
46041095: RNCC: 3 | RNVC: 2

3 Mar 1993

5975-14-449-7343
Interconnecting Box

144497343
20326734: RNCC: 3 | RNVC: 2

4 Sep 1991

5975-14-258-4473
Cable Hanger

142584473
204450-1-3: RNCC: 3 | RNVC: 2
502301: RNCC: 3 | RNVC: 2
204450: RNCC: 5 | RNVC: 2

1 Jan 1969

5975-15-153-3931
Blank Panel

151533931
5137-331-09: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-14-386-4784
Cable Marker Sleeve

143864784
320-048-401-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5975-27-056-5729
Cable Marker Sleeve

270565729
517047: RNCC: 5 | RNVC: 9

11 Apr 2012

5975-14-497-7497
Insulator Bracket

144977497
SE40: RNCC: 3 | RNVC: 2

15 Oct 1997

5975-14-542-0364
Cable Marker Sleeve

145420364
20066-492: RNCC: 3 | RNVC: 2
502101014020A: RNCC: 3 | RNVC: 9
2 0066-492: RNCC: 5 | RNVC: 2

2 Jul 2004

5975-14-417-3569
Push Button

144173569
NO PRIMARY REF14-417-3569: RNCC: 3 | RNVC: 2
905123: RNCC: 5 | RNVC: 9

6 Jul 1987

5975-14-549-3959
Blank Panel

145493959
IC 1051-11-7: RNCC: 3 | RNVC: 2
91659980: RNCC: 5 | RNVC: 2

29 Mar 2006

5975-14-499-4362
Cable Marker Sleeve

144994362
5600023-060249-000-0-11: RNCC: 3 | RNVC: 2
5600023-060249.000.0-11: RNCC: 5 | RNVC: 2
F300 0T 022 0900: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-349-7554
Junction Box

143497554
053M58-599033B: RNCC: 3 | RNVC: 2

14 Jun 1978

5975-14-382-5836
Cable Marker Sleeve

143825836
16899596: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-488-4906
Nonmetallic Raceway

144884906
45844249: RNCC: 3 | RNVC: 9

14 May 1997

5975-14-414-6047
Stuffing Tube

144146047
PEA01188: RNCC: 3 | RNVC: 2
8202612: RNCC: 5 | RNVC: 9

11 Feb 1987

5975-14-404-8371
Cable Marker Sleeve

144048371
29747471: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-520-4178
Interconnecting Box

145204178
39378928: RNCC: 3 | RNVC: 2

17 May 2000

5975-14-550-2786
Interconnecting Box

145502786
AW1172F00: RNCC: 3 | RNVC: 2

14 Jun 2006

5975-14-541-9016
Blank Panel

145419016
30818-481: RNCC: 3 | RNVC: 2

2 Jul 2004

5975-14-485-0241
Interconnecting Box

144850241
40163184: RNCC: 3 | RNVC: 2
AA-C0306: RNCC: 5 | RNVC: 2

19 Dec 1996

5975-14-531-9701
Interconnecting Box

145319701
15A1750: RNCC: 3 | RNVC: 2

2 Oct 2002

5975-14-476-0238
Switch Box Case

144760238
40500123: RNCC: 3 | RNVC: 2
AA-M0804: RNCC: 5 | RNVC: 2

17 May 1995

5975-14-448-9412
Interconnecting Box

144489412
556348: RNCC: 3 | RNVC: 2

24 Jul 1991

5975-14-268-0098
Stuffing Tube

142680098
823D66CS4N0RMALE: RNCC: 2 | RNVC: 2
5975BA-CS4L: RNCC: 5 | RNVC: 2

1 Jan 1970

5975-14-433-5045
Cable Marker Sleeve

144335045
320-123-901-0: RNCC: 3 | RNVC: 2

2 Aug 1989

5975-14-364-0745
Cable Marker Sleeve

143640745
452433: RNCC: 3 | RNVC: 2

7 Aug 1980

5975-14-238-2846
Cable Marker Sleeve

142382846
035200060045: RNCC: 3 | RNVC: 2
99024049: RNCC: 5 | RNVC: 2
HELAVIATWIN5REP5: RNCC: 5 | RNVC: 2
352006REP5: RNCC: 5 | RNVC: 2
99024049: RNCC: 5 | RNVC: 9
99024049: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-549-8507
Metallic Raceway

145498507
2093259: RNCC: 3 | RNVC: 2

16 May 2006

5975-14-040-5471
Junction Box

140405471
8105507: RNCC: 3 | RNVC: 2

1 Jan 1972

5975-14-483-3336
Insulator Bracket

144833336
06889: RNCC: 3 | RNVC: 2
3303430068891: RNCC: 5 | RNVC: 2

5 Sep 1996

5975-27-027-8142
Chassis Base

270278142
1501502069: RNCC: 2 | RNVC: 1

8 Nov 2005

5975-14-404-1835
Push Button

144041835
16798522: RNCC: 3 | RNVC: 2
16798522: RNCC: 3 | RNVC: 9

11 Sep 1985

5975-14-265-7044
Junction Box Cover

142657044
309163: RNCC: 3 | RNVC: 2

1 Jan 1970

5975-14-508-1235
Interior Cable Rack

145081235
19203158: RNCC: 3 | RNVC: 2

26 Aug 1998

5975-14-358-2233
Cable Marker Sleeve

143582233
SILAVIAA1BISF0058F1112320018: RNCC: 3 | RNVC: 2
F1112320018: RNCC: 5 | RNVC: 9

13 Aug 1979

5975-14-303-0252
Push Button

143030252
A16284198: RNCC: 3 | RNVC: 2
A16284198: RNCC: 5 | RNVC: 9

1 Jan 1973

5975-27-055-4612
Stuffing Tube

270554612
TPRNOZ M20X1,5: RNCC: 2 | RNVC: 1
TPRNOZ M20X1,5: RNCC: 5 | RNVC: 9

6 Dec 2011

5975-14-554-0535
Interior Cable Rack

145540535
507 516: RNCC: 3 | RNVC: 2
507 516: RNCC: 3 | RNVC: 2

8 Jun 2007

5975-14-383-1294
Cable Marker Sleeve

143831294
19S935: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-453-3877
Blank Panel

144533877
39291823: RNCC: 3 | RNVC: 2
39291823: RNCC: 3 | RNVC: 9

19 Feb 1992

5975-14-350-5144
Metallic Raceway

143505144
4420: RNCC: 3 | RNVC: 2

12 Jul 1978

5975-14-464-2318
Interconnecting Box

144642318
620-867-939-0: RNCC: 3 | RNVC: 2

28 Jul 1993

5975-14-526-5019
Cable Marker Sleeve

145265019
D65377-2: RNCC: 3 | RNVC: 2

1 Aug 2001

5975-14-356-9187
Cable Marker Sleeve

143569187
03600103015Z: RNCC: 3 | RNVC: 2
3597470036273: RNCC: 5 | RNVC: 2
360103REPZ: RNCC: 5 | RNVC: 2
V16REPZ: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-452-0981
Stuffing Tube

144520981
C0009003: RNCC: 3 | RNVC: 2
91358041: RNCC: 5 | RNVC: 2
1030: RNCC: 5 | RNVC: 2
1561 9: RNCC: 5 | RNVC: 2

18 Dec 1991

5975-14-445-0458
Cable Marker Sleeve

144450458
6-046: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-250-6995
Cable Marker Sleeve

142506995
204104-2: RNCC: 3 | RNVC: 2

1 Jan 1968

5975-14-379-6205
Push Button

143796205
165PS01A0A: RNCC: 3 | RNVC: 2

1 Oct 1982

5975-15-158-0178
Cable Marker Sleeve

151580178
47915A114100: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-329-5025
Switchboard Signal

143295025
21143-02-10-35: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-458-2831
Cable Marker Sleeve

144582831
NSA937201ME1200: RNCC: 1 | RNVC: 2
TMS1/2-9: RNCC: 3 | RNVC: 9
NSA937201ME1200: RNCC: 5 | RNVC: 2

15 Oct 1992

5975-15-108-4958
Insulator Bracket

151084958
M31EV524A: RNCC: 3 | RNVC: 2

6 Oct 1994

5975-14-473-9212
Cable Hanger

144739212
M04HW3121370802: RNCC: 3 | RNVC: 2

18 Jan 1995

5975-14-402-1113
Cable Marker Sleeve

144021113
401624: RNCC: 3 | RNVC: 2
BGE401624: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-373-6095
Cable Marker Sleeve

143736095
362107REPA: RNCC: 3 | RNVC: 2
BBZ2138: RNCC: 5 | RNVC: 2

13 Nov 1981

5975-14-398-5735
Pothead

143985735
DE711034079: RNCC: 3 | RNVC: 2
91A15: RNCC: 5 | RNVC: 2

31 Jan 1985

5975-14-328-0131
Stuffing Tube Plug

143280131
NO PRIMARY REF14-328-0131: RNCC: 3 | RNVC: 2
DC6F1-4DN: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-14-291-8778
Stuffing Tube

142918778
NO PRIMARY REF14-291-8778: RNCC: 3 | RNVC: 2
BVL3: RNCC: 5 | RNVC: 2

1 Jan 1972

5975-14-520-4077
Cable Marker Sleeve

145204077
554351G0002: RNCC: 3 | RNVC: 9

17 May 2000

5975-14-518-1250
Interconnecting Box

145181250
5000732241: RNCC: 3 | RNVC: 2

26 Jan 2000

5975-14-521-7425
Interior Cable Rack

145217425
HNG37037: RNCC: 3 | RNVC: 2

12 Sep 2000

5975-14-336-5057
Interior Cable Rack

143365057
GF94: RNCC: 3 | RNVC: 2

14 Aug 1976

5975-14-445-0462
Cable Marker Sleeve

144450462
6-086: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-531-7246
Conduit Outlet

145317246
TB4011005: RNCC: 3 | RNVC: 2

11 Sep 2002

5975-14-541-5776
Ground Rod

145415776
971111: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-445-0427
Cable Marker Sleeve

144450427
3-128: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-33-211-5294
Stuffing Tube

332115294
EN50262-M16X1,5 MS EMV 85: RNCC: 2 | RNVC: 2
1000.17.85.080: RNCC: 3 | RNVC: 2
0738123: RNCC: 5 | RNVC: 2

24 Nov 2013

5975-14-279-2233
Interior Cable Rack

142792233
30177: RNCC: 3 | RNVC: 2

1 Jan 1971

5975-14-328-8296
Push Button

143288296
151032: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-468-0731
Cable Hanger

144680731
233761: RNCC: 3 | RNVC: 2
85-695-1443: RNCC: 6 | RNVC: 9

9 Feb 1994

5975-14-367-3306
Interior Cable Rack

143673306
6200012: RNCC: 3 | RNVC: 2
612005: RNCC: 3 | RNVC: 2
612005: RNCC: 5 | RNVC: 2
BPR12UZ33: RNCC: 5 | RNVC: 2

11 Dec 1980

5975-14-445-0424
Cable Marker Sleeve

144450424
3-024: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-445-0402
Cable Marker Sleeve

144450402
2-067: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-289-1160
Junction Box

142891160
3-1589: RNCC: 3 | RNVC: 2

1 Jan 1972

5975-14-471-7404
Ground Rod

144717404
AFK0316PT: RNCC: 3 | RNVC: 2

14 Sep 1994

5975-33-200-4107
Cable Marker Sleeve

332004107
Q 314 196 503: RNCC: 3 | RNVC: 2

22 Jan 2002

5975-15-121-5866
Blank Panel

151215866
ADF7571: RNCC: 3 | RNVC: 2

24 Jun 1999

5975-14-426-4888
Cable Marker Sleeve

144264888
WBS3-4-7: RNCC: 3 | RNVC: 2

1 Sep 1988

5975-27-017-0249
Stuffing Tube

270170249
305.03.00008: RNCC: 2 | RNVC: 1
PG-9: RNCC: 2 | RNVC: 1

1 May 2003

5975-14-445-0395
Cable Marker Sleeve

144450395
2-037: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-402-1092
Cable Marker Sleeve

144021092
401603: RNCC: 3 | RNVC: 2
BGE401603: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-404-7287
Cable Marker Sleeve

144047287
39049275: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-352-5166
Cable Marker Sleeve

143525166
353063-01REPE: RNCC: 3 | RNVC: 2

16 Oct 1978

5975-14-545-8822
Cable Marker Sleeve

145458822
03740180004D: RNCC: 3 | RNVC: 2
03740180004D: RNCC: 5 | RNVC: 2
6070-GT-0000004: RNCC: 5 | RNVC: 9

24 May 2005

5975-33-204-2178
Interconnecting Box

332042178
CLT-0434-10: RNCC: 3 | RNVC: 2

17 May 2005

5975-14-383-9502
Cable Marker Sleeve

143839502
78-15CXZ5S30LAB149JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ5S30JLAB149: RNCC: 5 | RNVC: 2
78-15CXZ5S30LAB149J: RNCC: 5 | RNVC: 2

4 May 1983

5975-14-519-1860
Cable Marker Sleeve

145191860
TMS314-9: RNCC: 3 | RNVC: 9

10 Mar 2000

5975-14-485-2358
Interior Cable Rack

144852358
421171: RNCC: 3 | RNVC: 2
421171: RNCC: 5 | RNVC: 2
421171: RNCC: 5 | RNVC: 2

13 Jan 1997

5975-14-506-8695
Interconnecting Box

145068695
0-0142181-2: RNCC: 3 | RNVC: 2

27 May 1998

5975-14-527-6344
Ground Rod

145276344
1SH41585001: RNCC: 3 | RNVC: 2

7 Nov 2001

5975-14-348-7526
Ground Rod

143487526
NT4729DEC70: RNCC: 3 | RNVC: 2

19 Apr 1978

5975-14-426-4698
Switch Box Case

144264698
BAZ097063: RNCC: 3 | RNVC: 2

1 Sep 1988

5975-14-500-9370
Junction Box

145009370
B68501100000: RNCC: 3 | RNVC: 2
F300 0T 024 9582: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-453-4944
Cable Marker Sleeve

144534944
353042-01REPX: RNCC: 3 | RNVC: 2

24 Feb 1992

5975-14-405-1011
Cable Marker Sleeve

144051011
362003-01SYMB0LEM: RNCC: 3 | RNVC: 2
M22BLANCSYMB0LEM: RNCC: 5 | RNVC: 2

20 Nov 1985

5975-14-545-8927
Cable Marker Sleeve

145458927
03740180004L: RNCC: 3 | RNVC: 2
03740180004L: RNCC: 5 | RNVC: 2
6070-GT-0000010: RNCC: 5 | RNVC: 9

25 May 2005

5975-27-006-7259
Blank Panel

270067259
YG-AKS-003-006: RNCC: 2 | RNVC: 1

6 Apr 1999

5975-14-479-1570
Cable Marker Sleeve

144791570
03520016004-: RNCC: 3 | RNVC: 2
352-016--: RNCC: 3 | RNVC: 2
352016REP-: RNCC: 5 | RNVC: 2
HELAVIATWIN5SYMB-: RNCC: 5 | RNVC: 2

18 Dec 1995

5975-14-452-0245
Cable Marker Sleeve

144520245
426214-01: RNCC: 3 | RNVC: 2

18 Dec 1991

5975-14-258-8694
Ground Rod

142588694
2628: RNCC: 3 | RNVC: 9
FD1665: RNCC: 5 | RNVC: 2

16 Mar 1995

5975-14-483-4166
Blank Panel

144834166
511ST0038-6: RNCC: 3 | RNVC: 2

12 Sep 1996

5975-15-157-3245
Nonmetallic Raceway

151573245
8010: RNCC: 3 | RNVC: 2

24 Jun 2003

5975-14-512-5931
Ground Rod

145125931
1510: RNCC: 3 | RNVC: 2

17 Feb 1999

5975-33-002-3256
Blank Panel

330023256
115.12.01/2: RNCC: 3 | RNVC: 2

22 Aug 1994

5975-14-392-8961
Ground Rod

143928961
4770302280: RNCC: 3 | RNVC: 2

7 Apr 1984

5975-14-445-0358
Cable Marker Sleeve

144450358
1-118: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-404-8360
Cable Marker Sleeve

144048360
29747460: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-424-0864
Interior Cable Rack

144240864
969876P03: RNCC: 3 | RNVC: 2
969876P03: RNCC: 5 | RNVC: 9

11 May 1988

5975-14-368-5825
Interior Cable Rack

143685825
30805: RNCC: 3 | RNVC: 2

20 Feb 1981

5975-14-342-0057
Interior Cable Rack

143420057
D107SZ100: RNCC: 3 | RNVC: 2
D107SZ100: RNCC: 5 | RNVC: 2
101011: RNCC: 5 | RNVC: 9
D107SZ100: RNCC: 5 | RNVC: 9

14 Apr 1977

5975-14-457-6863
Cable Collar

144576863
1-00402150: RNCC: 3 | RNVC: 2

15 Sep 1992

5975-27-016-9401
Metallic Raceway

270169401
204X204X100: RNCC: 2 | RNVC: 1
4T82-200/100AS: RNCC: 2 | RNVC: 1
4T82-200/100AS: RNCC: 2 | RNVC: 1

16 Apr 2003

5975-14-545-4692
Junction Box

145454692
SE11105: RNCC: 3 | RNVC: 2
S991M50T1002: RNCC: 5 | RNVC: 2

13 Apr 2005

5975-14-425-9015
Cable Marker Sleeve

144259015
BAZ10981: RNCC: 3 | RNVC: 2

28 Jul 1988

5975-14-254-1182
Cable Marker Sleeve

142541182
352005REPJ: RNCC: 3 | RNVC: 2
99044441: RNCC: 5 | RNVC: 2
HELAVIATWIN4REPJ: RNCC: 5 | RNVC: 2
99044441: RNCC: 5 | RNVC: 9
99044441: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-486-2879
Stuffing Tube

144862879
95542: RNCC: 3 | RNVC: 2
5531062: RNCC: 5 | RNVC: 9
LG95542: RNCC: 5 | RNVC: 9

11 Mar 1997

5975-14-347-1267
Cable Collar

143471267
32014: RNCC: 3 | RNVC: 2
SST2M30: RNCC: 5 | RNVC: 2
328798: RNCC: 5 | RNVC: 9

27 Aug 1997

5975-15-158-0195
Cable Marker Sleeve

151580195
47915A126470: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-333-2617
Cable Collar

143332617
15159609: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-440-3584
Stuffing Tube

144403584
3511 271 80731: RNCC: 3 | RNVC: 2

11 Jul 1990

5975-14-264-8076
Stuffing Tube

142648076
602900: RNCC: 3 | RNVC: 2
1001602900: RNCC: 5 | RNVC: 2
22290: RNCC: 5 | RNVC: 2
60290: RNCC: 5 | RNVC: 2
N0RMADIX29: RNCC: 5 | RNVC: 2
C065352: RNCC: 5 | RNVC: 2
91364638: RNCC: 5 | RNVC: 2
60290: RNCC: 5 | RNVC: 9

1 Jan 1970

5975-14-268-0127
Stuffing Tube

142680127
823D66BVP3: RNCC: 2 | RNVC: 2
50532: RNCC: 3 | RNVC: 2

1 Jan 1970

5975-33-106-5606
Stuffing Tube

331065606
01305067-0: RNCC: 3 | RNVC: 2

1 Jul 1998

5975-14-445-0452
Cable Marker Sleeve

144450452
6-034: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-345-2236
Junction Box Cover

143452236
FF1E601-40820: RNCC: 3 | RNVC: 2

5 Oct 1977

5975-14-277-0030
Junction Box

142770030
153880: RNCC: 3 | RNVC: 2

1 Jan 1971

5975-27-047-0667
Raceway Cover

270470667
67582S: RNCC: 5 | RNVC: 9

2 Nov 2009

5975-14-404-8527
Cable Marker Sleeve

144048527
29747923: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-031-2791
Cable Marker Sleeve

140312791
BJM08286: RNCC: 3 | RNVC: 2

14 Jun 1980

5975-14-404-8369
Cable Marker Sleeve

144048369
29747469: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-361-8065
Access Cover

143618065
1844A106: RNCC: 3 | RNVC: 2

20 Feb 1980

5975-14-385-7914
Stuffing Tube

143857914
XWMW308: RNCC: 3 | RNVC: 2

26 Jul 1983

5975-14-276-1475
Junction Box

142761475
11-000-38: RNCC: 3 | RNVC: 2

1 Jan 1971

5975-27-046-9907
Blank Panel

270469907
B9932185: RNCC: 2 | RNVC: 1

26 Oct 2009

5975-14-277-5950
Cable Marker Sleeve

142775950
352002SYMBCA: RNCC: 3 | RNVC: 2
HELAVIATWIN1REPCA: RNCC: 5 | RNVC: 2

1 Jan 1971

5975-33-005-4091
Junction Box

330054091
DB-10/10: RNCC: 3 | RNVC: 2

20 Jul 2001

5975-14-416-7314
Cable Marker Sleeve

144167314
HT20-25BA12-048: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-270-9114
Cable Marker Sleeve

142709114
204337-1392A: RNCC: 3 | RNVC: 2
7815CXZ11S30KD1392AJ: RNCC: 5 | RNVC: 9

1 Jan 1970

5975-14-505-6845
Metallic Raceway

145056845
326181C46652: RNCC: 3 | RNVC: 2
0164: RNCC: 3 | RNVC: 2

26 Mar 1998

5975-14-501-4430
Interconnecting Box

145014430
446530: RNCC: 3 | RNVC: 2
446530-001: RNCC: 5 | RNVC: 9

29 Oct 1997

5975-14-541-8284
Cable Marker Sleeve

145418284
88179-1190: RNCC: 3 | RNVC: 2

26 Jun 2004

5975-14-546-1583
Metallic Raceway

145461583
001050: RNCC: 3 | RNVC: 2
AA016700: RNCC: 6 | RNVC: 9

15 Jun 2005

5975-14-508-2460
Switch Box Case

145082460
8990330: RNCC: 3 | RNVC: 2
5001844925: RNCC: 5 | RNVC: 2

2 Sep 1998

5975-14-357-5364
Anchor Strap

143575364
A11A234260025A1: RNCC: 3 | RNVC: 2

7 Jun 1979

5975-14-428-8433
Interconnecting Box

144288433
16456659: RNCC: 3 | RNVC: 2

22 Dec 1988

5975-15-207-2051
Junction Box

152072051
436310016: RNCC: 3 | RNVC: 2
(241)A0199436310016: RNCC: 5 | RNVC: 2

21 Sep 2012

5975-14-470-0058
Interconnecting Box

144700058
45-0410: RNCC: 3 | RNVC: 2

25 May 1994

5975-14-374-3515
Junction Box

143743515
620-847-963-0: RNCC: 3 | RNVC: 2
620-847-963-0: RNCC: 3 | RNVC: 2
85-691-4924: RNCC: 6 | RNVC: 9

8 Dec 1981

5975-14-330-6910
Cable Marker Sleeve

143306910
3009-99: RNCC: 3 | RNVC: 2
85-686-5147: RNCC: 6 | RNVC: 9

2 Jul 1975

5975-27-051-4644
Raceway Cover

270514644
M.142200: RNCC: 2 | RNVC: 1

28 Oct 2010

5975-14-311-9332
Stuffing Tube

143119332
16293008: RNCC: 3 | RNVC: 2
16293008: RNCC: 5 | RNVC: 9

1 Jan 1974

5975-14-372-0475
Interconnecting Box

143720475
0809P045002: RNCC: 3 | RNVC: 2

1 Sep 1981

5975-14-460-3314
Junction Box

144603314
3511 265 17561: RNCC: 3 | RNVC: 2
3511 265 17561: RNCC: 5 | RNVC: 9
5045522: RNCC: 5 | RNVC: 9

21 Jan 1993

5975-14-512-3864
Interconnecting Box

145123864
38167313: RNCC: 3 | RNVC: 2

11 Feb 1999

5975-14-520-3162
Interconnecting Box

145203162
FE00LJT17-014: RNCC: 3 | RNVC: 2
91644993: RNCC: 3 | RNVC: 2

17 May 2000

5975-14-364-6582
Cable Marker Sleeve

143646582
4-320: RNCC: 3 | RNVC: 2
T0US58P211-320: RNCC: 5 | RNVC: 2
ST400S58P211-320: RNCC: 5 | RNVC: 2

2 Sep 1980

5975-14-405-1020
Cable Marker Sleeve

144051020
362006-01SYMB0LEP: RNCC: 3 | RNVC: 2
362006-01SYMB+: RNCC: 5 | RNVC: 2
M40BLANCSYMB0LEP: RNCC: 5 | RNVC: 2

20 Nov 1985

5975-15-153-3963
Blank Panel

151533963
5137-388-02: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-14-514-2227
Stuffing Tube

145142227
MN823C FEUILLET 6/13-28/12/54: RNCC: 2 | RNVC: 2
NGM00000510202 CORPS PBV2-14-5: RNCC: 5 | RNVC: 2

28 Apr 1999

5975-14-352-3351
Cable Marker Sleeve

143523351
353063-01REP3: RNCC: 3 | RNVC: 2
PLI02X10-3: RNCC: 5 | RNVC: 2

16 Oct 1978

5975-33-200-6204
Stuffing Tube

332006204
IN-050-1977/78-E04I.CC07: RNCC: 3 | RNVC: 2

7 Feb 2002

5975-27-046-3185
Junction Box Cover

270463185
660-10652: RNCC: 2 | RNVC: 1

29 Jul 2009

5975-14-472-7593
Interconnecting Box

144727593
332A67-3610-1101: RNCC: 3 | RNVC: 2

9 Nov 1994

5975-14-546-1404
Nonmetallic Raceway

145461404
00331: RNCC: 3 | RNVC: 2
TA-E 150X60 W0: RNCC: 5 | RNVC: 2
AA016611: RNCC: 6 | RNVC: 9

15 Jun 2005

5975-14-468-7826
Cable Hanger

144687826
E0607-02: RNCC: 1 | RNVC: 2
E0607-02: RNCC: 3 | RNVC: 2
N7788261235: RNCC: 5 | RNVC: 2
ASN-E0607-02: RNCC: 5 | RNVC: 2

22 Mar 1994

5975-14-416-7335
Cable Marker Sleeve

144167335
HT30-25BA13-003: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-420-7480
Cable Marker Sleeve

144207480
ST400S58P201-144: RNCC: 3 | RNVC: 2
1-144: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-377-0209
Cable Marker Sleeve

143770209
TMS3/32-9: RNCC: 3 | RNVC: 9
TMS3-32-9: RNCC: 5 | RNVC: 2
TMS-3/32-48MM-9: RNCC: 5 | RNVC: 9
TMS3-32-9: RNCC: 5 | RNVC: 9
TMS3/32-48MMBLANC: RNCC: 5 | RNVC: 9
85-694-6166: RNCC: 6 | RNVC: 9

28 Apr 1982

5975-14-501-6374
Cable Marker Sleeve

145016374
370102-04REP2: RNCC: 3 | RNVC: 2
91633937: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-27-029-0109
Chassis Base

270290109
GPR-SSE-02: RNCC: 2 | RNVC: 1

22 Feb 2006

5975-14-310-6372
Cable Marker Sleeve

143106372
H100-35J0K220: RNCC: 3 | RNVC: 2
N95-35JAUNEK220: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-209-5244
Cable Collar

142095244
NO PRIMARY REF14-209-5244: RNCC: 3 | RNVC: 2
21189: RNCC: 5 | RNVC: 9

1 Jan 1964

5975-14-517-7339
Cable Marker Sleeve

145177339
320-314-101-0: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-14-496-8868
Interconnecting Box

144968868
NO PRIMARY REF14-496-8868: RNCC: 3 | RNVC: 2
25302-89096: RNCC: 5 | RNVC: 9
F300 0T 022 2360: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-33-002-1590
Interconnecting Box

330021590
921.412.00: RNCC: 3 | RNVC: 2

1 Jul 1993

5975-14-358-3613
Conduit Outlet

143583613
03070: RNCC: 3 | RNVC: 2
307: RNCC: 5 | RNVC: 2
12407: RNCC: 5 | RNVC: 2

13 Aug 1979

5975-14-317-0611
Cable Marker Sleeve

143170611
NO PRIMARY REF14-317-0611: RNCC: 3 | RNVC: 2
9560110220: RNCC: 5 | RNVC: 2
35318-2: RNCC: 5 | RNVC: 9

1 Jan 1975

5975-14-452-5423
Interconnecting Box

144525423
8173381: RNCC: 3 | RNVC: 2
8173381-E: RNCC: 5 | RNVC: 2

8 Jan 1992

5975-14-407-7714
Switch Box Case

144077714
403378-09: RNCC: 3 | RNVC: 2
403378-09: RNCC: 5 | RNVC: 9

5 Mar 1986

5975-14-420-7490
Cable Marker Sleeve

144207490
ST400S58P201-196: RNCC: 3 | RNVC: 2
1-196: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-334-4382
Push Button

143344382
LUF44F3550-17827AV2: RNCC: 3 | RNVC: 2
17827AV2: RNCC: 5 | RNVC: 9

1 Jun 1976

Load More Results