What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 118 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 118of 491

5975-14-422-2349
Junction Box

144222349
0436-01-144000: RNCC: 3 | RNVC: 2

24 Feb 1988

5975-14-205-9330
Stuffing Tube

142059330
2228-33-51-25-01: RNCC: 3 | RNVC: 2

1 Jan 1964

5975-14-453-8645
Switch Box Case

144538645
45100550: RNCC: 3 | RNVC: 2

12 Mar 1992

5975-14-542-3686
Interconnecting Box

145423686
8704-50: RNCC: 3 | RNVC: 2

8 Jul 2004

5975-27-019-4282
Cable Marker Sleeve

270194282
10091MN0034: RNCC: 2 | RNVC: 1

15 Nov 2003

5975-14-398-8652
Push Button

143988652
00019660V: RNCC: 3 | RNVC: 9

6 Mar 1985

5975-14-404-7253
Cable Marker Sleeve

144047253
20781791: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-238-2667
Cable Marker Sleeve

142382667
352002REPA: RNCC: 3 | RNVC: 2
99042428: RNCC: 5 | RNVC: 2
HELAVIATWIN1REPA: RNCC: 5 | RNVC: 2
99042428: RNCC: 5 | RNVC: 9
99042428: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-389-6641
Brake Disc

143896641
707646REP3: RNCC: 3 | RNVC: 2

20 Dec 1983

5975-14-334-3035
Blank Panel

143343035
20009: RNCC: 3 | RNVC: 2

23 Apr 1976

5975-14-379-4226
Push Button

143794226
BLSWGB: RNCC: 3 | RNVC: 2
BLSWGBJAUNE: RNCC: 5 | RNVC: 2

1 Oct 1982

5975-14-500-8696
Junction Box

145008696
A66203100000: RNCC: 3 | RNVC: 2
F300 0T 024 8900: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-382-6248
Cable Marker Sleeve

143826248
96080518: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-404-8431
Cable Marker Sleeve

144048431
29747533: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-404-7231
Cable Marker Sleeve

144047231
20781789: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-453-5758
Cable Marker Sleeve

144535758
BAZ9873: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-394-3492
Stuffing Tube

143943492
BVLE1405REP1: RNCC: 3 | RNVC: 2

28 Aug 1984

5975-14-408-4560
Junction Box

144084560
FE500067775: RNCC: 3 | RNVC: 2
92A25F: RNCC: 5 | RNVC: 2

1 Apr 1986

5975-14-443-2679
Insulator Pin

144432679
16803328: RNCC: 3 | RNVC: 2
16803328: RNCC: 3 | RNVC: 9

14 Nov 1990

5975-14-540-2232
Cable Crosshead

145402232
AL1457F00: RNCC: 3 | RNVC: 2

11 Mar 2004

5975-14-362-5998
Cable Marker Sleeve

143625998
036002020053: RNCC: 3 | RNVC: 2
360102REP3: RNCC: 5 | RNVC: 2
360202REP3: RNCC: 5 | RNVC: 2
3597470040386: RNCC: 5 | RNVC: 2
V11REP3: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-383-0044
Nonmetallic Raceway

143830044
4770202670: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-449-5776
Cable Marker Sleeve

144495776
03640002004Z: RNCC: 3 | RNVC: 2
364002REPZ: RNCC: 5 | RNVC: 2
3597470050507: RNCC: 5 | RNVC: 2

27 Aug 1991

5975-14-465-6828
Stuffing Tube

144656828
241609: RNCC: 3 | RNVC: 2

6 Oct 1993

5975-14-477-9073
Interconnecting Box

144779073
782TS03Y1002: RNCC: 3 | RNVC: 2

2 Oct 1995

5975-14-440-3566
Stuffing Tube

144403566
3511 271 80451: RNCC: 3 | RNVC: 2

11 Jul 1990

5975-14-468-0838
Interconnecting Box

144680838
LYN009055013701: RNCC: 3 | RNVC: 2

9 Feb 1994

5975-14-451-8115
Cable Crosshead

144518115
51437-3: RNCC: 3 | RNVC: 2
91475093: RNCC: 5 | RNVC: 2
51437-3: RNCC: 5 | RNVC: 9

4 Dec 1991

5975-27-021-4228
Junction Box

270214228
05001HB0209: RNCC: 2 | RNVC: 1
41001: RNCC: 2 | RNVC: 1
41001: RNCC: 5 | RNVC: 9

15 Dec 2003

5975-14-481-6461
Ground Rod

144816461
61496: RNCC: 3 | RNVC: 2

23 May 1996

5975-14-445-0466
Cable Marker Sleeve

144450466
6-302: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-543-9687
Interconnecting Box

145439687
1008191-0: RNCC: 3 | RNVC: 2

19 Dec 2004

5975-14-432-5483
Cable Marker Sleeve

144325483
D51900-79: RNCC: 3 | RNVC: 2
D51900-79: RNCC: 5 | RNVC: 2

14 Jun 1989

5975-33-200-4109
Cable Marker Sleeve

332004109
Q 314 196 505: RNCC: 3 | RNVC: 2

22 Jan 2002

5975-14-527-1927
Chassis Base

145271927
21052189-00: RNCC: 3 | RNVC: 2

10 Oct 2001

5975-27-042-5937
Junction Box

270425937
85X85 KARE: RNCC: 5 | RNVC: 9
85X85 KARE: RNCC: 5 | RNVC: 9
85X85 MM: RNCC: 5 | RNVC: 9

28 Aug 2008

5975-27-040-8984
Junction Box

270408984
BIB-140: RNCC: 5 | RNVC: 9

7 Apr 2008

5975-14-462-7982
Cable Marker Sleeve

144627982
TMS-3/32NR13U9: RNCC: 3 | RNVC: 9
TMS3-32NR13U9: RNCC: 5 | RNVC: 9

30 Apr 1993

5975-14-476-1414
Cable Marker Sleeve

144761414
HOI50-RO-Z: RNCC: 3 | RNVC: 2
HOI50-Z: RNCC: 5 | RNVC: 2
HOI50-Z-ROSE: RNCC: 5 | RNVC: 2

24 May 1995

5975-14-518-5048
Interconnecting Box

145185048
EPXXX000030: RNCC: 3 | RNVC: 9

9 Feb 2000

5975-14-398-5734
Pothead

143985734
DE711028022: RNCC: 3 | RNVC: 2
92A4: RNCC: 5 | RNVC: 2
5970-A1-000-0002: RNCC: 6 | RNVC: 9

31 Jan 1985

5975-15-174-7020
Blank Panel

151747020
ECN40SB-97: RNCC: 3 | RNVC: 2

2 Oct 2003

5975-14-504-6521
Crossarm Brace

145046521
LS02-001-07: RNCC: 3 | RNVC: 2

25 Feb 1998

5975-14-384-3385
Junction Box

143843385
109060: RNCC: 3 | RNVC: 2
109060: RNCC: 5 | RNVC: 2
85-800-9656: RNCC: 6 | RNVC: 9

4 May 1983

5975-14-339-4411
Cable Marker Sleeve

143394411
620-844-160-0: RNCC: 3 | RNVC: 2
620-844-160-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-521-6188
Switch Box Case

145216188
26-4-E-XX-621500-901: RNCC: 3 | RNVC: 2

30 Aug 2000

5975-14-453-4933
Cable Marker Sleeve

144534933
353042-01REPAMIN: RNCC: 3 | RNVC: 2

24 Feb 1992

5975-14-485-4558
Interconnecting Box

144854558
434340: RNCC: 3 | RNVC: 2
434340-002: RNCC: 5 | RNVC: 9

23 Jan 1997

5975-14-545-9733
Cable Marker Sleeve

145459733
03740140004I: RNCC: 3 | RNVC: 2
03740140004I: RNCC: 5 | RNVC: 2
6070-GT-0000111: RNCC: 5 | RNVC: 9

31 May 2005

5975-14-268-0110
Stuffing Tube

142680110
823D66PV1: RNCC: 3 | RNVC: 9

1 Jan 1970

5975-33-155-0882
Junction Box

331550882
92212: RNCC: 3 | RNVC: 2

11 Jul 1995

5975-14-470-9085
Cable Marker Sleeve

144709085
035200120044: RNCC: 3 | RNVC: 2
352012REP4: RNCC: 5 | RNVC: 2
3597470262269: RNCC: 5 | RNVC: 2

13 Jul 1994

5975-14-525-9562
Cable Crosshead

145259562
AL1282F00: RNCC: 3 | RNVC: 2

20 Jun 2001

5975-14-278-3593
Rigid Metal Conduit

142783593
160-79221-06: RNCC: 3 | RNVC: 2

1 Jan 1971

5975-14-444-6855
Cable Marker Sleeve

144446855
1-026: RNCC: 3 | RNVC: 2

16 Jan 1991

5975-43-000-2778
Ground Rod

430002778
ANC/RC/00-00-02: RNCC: 3 | RNVC: 2
20KZ 00.00.00.00-03-03 POZYCJA: RNCC: 5 | RNVC: 2

10 Nov 2006

5975-14-321-6684
Junction Box

143216684
0177187000: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-291-1675
Cable Marker Sleeve

142911675
516982G2: RNCC: 3 | RNVC: 2

1 Jan 1972

5975-14-268-0028
Stuffing Tube

142680028
823D66BVL1: RNCC: 2 | RNVC: 2
50610: RNCC: 3 | RNVC: 2
91324326: RNCC: 5 | RNVC: 2
91324326: RNCC: 5 | RNVC: 2
01257269: RNCC: 5 | RNVC: 2
01257269: RNCC: 5 | RNVC: 2

1 Jan 1970

5975-14-480-4857
Conduit Outlet

144804857
03180: RNCC: 3 | RNVC: 2

14 Mar 1996

5975-14-524-1329
Cable Marker Sleeve

145241329
F1261607: RNCC: 3 | RNVC: 2

5 Mar 2001

5975-14-523-1867
Nonmetallic Raceway

145231867
45708608: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-14-323-6421
Blank Panel

143236421
TR680: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-363-3366
Guy Set

143633366
HHI20100: RNCC: 3 | RNVC: 2

3 Apr 1980

5975-14-382-9283
Nonmetallic Raceway

143829283
4770202600: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-490-3029
Blank Panel

144903029
A02332-03-2100: RNCC: 3 | RNVC: 2

24 Sep 1997

5975-14-296-7683
Fanning Strip

142967683
00306103134: RNCC: 3 | RNVC: 2
5171399300: RNCC: 3 | RNVC: 2
3061-31: RNCC: 5 | RNVC: 2
713993: RNCC: 5 | RNVC: 2
713993B: RNCC: 5 | RNVC: 2
91758019: RNCC: 5 | RNVC: 9

1 Jan 1973

5975-14-477-4255
Stuffing Tube

144774255
96110738: RNCC: 3 | RNVC: 2
96110738: RNCC: 5 | RNVC: 2

30 Aug 1995

5975-14-516-9546
Interconnecting Box

145169546
101163957010: RNCC: 3 | RNVC: 2

28 Oct 1999

5975-33-000-9477
Pothead

330009477
ROF 137 7004/3: RNCC: 3 | RNVC: 2

18 Oct 1989

5975-14-404-4899
Junction Box

144044899
403820: RNCC: 3 | RNVC: 2
403820: RNCC: 5 | RNVC: 9

12 Nov 1985

5975-14-402-1158
Cable Marker Sleeve

144021158
401785: RNCC: 3 | RNVC: 2
BGE401785: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-447-0195
Junction Box

144470195
BAZ9885: RNCC: 3 | RNVC: 2

25 Apr 1991

5975-14-514-5365
Stuffing Tube

145145365
MR800REP641A: RNCC: 3 | RNVC: 2
4116-48170: RNCC: 5 | RNVC: 2

26 May 1999

5975-27-002-9894
Blank Panel

270029894
205-075-036-025EAL-1: RNCC: 3 | RNVC: 2

18 Oct 1994

5975-14-416-7308
Cable Marker Sleeve

144167308
HT20-25BA12-042: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-507-9909
Cable Marker Sleeve

145079909
25260-0002-03: RNCC: 3 | RNVC: 2
9398083035: RNCC: 5 | RNVC: 9

26 Aug 1998

5975-14-383-9520
Cable Marker Sleeve

143839520
78-15CXZ5S30LAB126JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ5S30LAB126J: RNCC: 5 | RNVC: 2
78-15CXZ5S30JLAB126: RNCC: 5 | RNVC: 2

4 May 1983

5975-14-350-1432
Stuffing Tube

143501432
5975CABVL2: RNCC: 2 | RNVC: 2
539200: RNCC: 3 | RNVC: 2
99770790418: RNCC: 5 | RNVC: 2
53920: RNCC: 5 | RNVC: 2
A003068: RNCC: 5 | RNVC: 2
5975CA-BVL2: RNCC: 5 | RNVC: 2

14 Jun 1978

5975-14-391-1616
Junction Box

143911616
NO PRIMARY REF14-391-1616: RNCC: 3 | RNVC: 2
27205: RNCC: 5 | RNVC: 2

1 Mar 1984

5975-14-469-9649
Cable Marker Sleeve

144699649
213855-01: RNCC: 3 | RNVC: 2

18 May 1994

5975-14-428-5578
Cable Marker Sleeve

144285578
73G2D: RNCC: 3 | RNVC: 2

8 Dec 1988

5975-27-054-1207
Stuffing Tube

270541207
15X1.5: RNCC: 3 | RNVC: 1

27 Jul 2011

5975-14-263-2296
Stuffing Tube

142632296
823D66PAL2: RNCC: 2 | RNVC: 2

1 Jan 1970

5975-14-517-4683
Fanning Strip

145174683
039451: RNCC: 3 | RNVC: 2
3245060394516: RNCC: 5 | RNVC: 2
39451: RNCC: 5 | RNVC: 2

15 Dec 1999

5975-14-443-0733
Junction Box

144430733
R4P601-50M1: RNCC: 3 | RNVC: 2

7 Nov 1990

5975-14-394-1747
Conduit Outlet

143941747
089121: RNCC: 3 | RNVC: 2
3245060891213: RNCC: 5 | RNVC: 2
89121: RNCC: 5 | RNVC: 2
174-4593: RNCC: 5 | RNVC: 2
891-21: RNCC: 5 | RNVC: 2
LG89121: RNCC: 5 | RNVC: 9
5313092: RNCC: 5 | RNVC: 9

23 Jun 1984

5975-14-527-9460
Cable Collar

145279460
F702-47: RNCC: 3 | RNVC: 2

4 Dec 2001

5975-14-420-7545
Cable Marker Sleeve

144207545
ST400S58P202-121: RNCC: 3 | RNVC: 2
2-121: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-330-6675
Cable Marker Sleeve

143306675
120870: RNCC: 3 | RNVC: 2
120870A: RNCC: 3 | RNVC: 2
120870: RNCC: 5 | RNVC: 9
85-688-3863: RNCC: 6 | RNVC: 9

2 Jul 1975

5975-14-501-6379
Cable Marker Sleeve

145016379
370102-04REP7: RNCC: 3 | RNVC: 2
91633941: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-14-347-8724
Cable Marker Sleeve

143478724
353063-01REPD: RNCC: 3 | RNVC: 2

1 Mar 1978

5975-14-551-2059
Interconnecting Box

145512059
10695890000: RNCC: 3 | RNVC: 2

6 Sep 2006

5975-14-288-5151
Fanning Strip

142885151
BR1445A4-9363: RNCC: 3 | RNVC: 2

1 Jan 1972

5975-14-539-6092
Interconnecting Box

145396092
10703120000: RNCC: 3 | RNVC: 2
10703120: RNCC: 3 | RNVC: 2

26 Jan 2004

5975-14-376-4563
Interconnecting Box

143764563
16379409: RNCC: 3 | RNVC: 2
16379409: RNCC: 5 | RNVC: 9
16379409: RNCC: 5 | RNVC: 9

28 Apr 1982

5975-14-428-8412
Interconnecting Box

144288412
20325391: RNCC: 3 | RNVC: 2
20325391: RNCC: 5 | RNVC: 9

22 Dec 1988

5975-14-549-7488
Metallic Raceway

145497488
10708801000: RNCC: 3 | RNVC: 2

9 May 2006

5975-14-453-5721
Cable Marker Sleeve

144535721
BAZ9657: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-497-5011
Interconnecting Box

144975011
NM089: RNCC: 3 | RNVC: 2
NM089: RNCC: 5 | RNVC: 9
F300 0T 023 2759: RNCC: 6 | RNVC: 9
F300 0T 020 7721: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-504-0956
Interconnecting Box

145040956
40402591: RNCC: 3 | RNVC: 2

6 Feb 1998

5975-14-430-0782
Interconnecting Box

144300782
20069513: RNCC: 3 | RNVC: 2

1 Mar 1989

5975-14-407-6898
Stuffing Tube

144076898
322M218-81REP21: RNCC: 3 | RNVC: 2

27 Feb 1986

5975-27-049-0013
Guide Rail

270490013
MP002666: RNCC: 2 | RNVC: 1

24 Mar 2010

5975-14-551-3902
Junction Box Cover

145513902
251796681: RNCC: 3 | RNVC: 2

15 Sep 2006

5975-14-509-2400
Junction Box

145092400
163-071: RNCC: 3 | RNVC: 2

21 Oct 1998

5975-14-385-5924
Switch Box Case

143855924
611GC01Y: RNCC: 3 | RNVC: 2

26 Jul 1983

5975-14-515-0901
Switch Box Case

145150901
311152: RNCC: 3 | RNVC: 2
TID29459: RNCC: 5 | RNVC: 2

6 Jul 1999

5975-14-552-2375
Stuffing Tube

145522375
532600: RNCC: 3 | RNVC: 2

5 Dec 2006

5975-14-299-0691
Access Cover

142990691
341A62-1214-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-541-8272
Cable Marker Sleeve

145418272
88179-1178: RNCC: 3 | RNVC: 2

26 Jun 2004

5975-14-468-6161
Interconnecting Box

144686161
84013478-2: RNCC: 3 | RNVC: 2
13331504-1: RNCC: 5 | RNVC: 2

9 Mar 1994

5975-14-399-2155
Stuffing Tube

143992155
C63-022CM6P: RNCC: 2 | RNVC: 2
240702: RNCC: 3 | RNVC: 2
098010: RNCC: 3 | RNVC: 2
63-022CM6P: RNCC: 5 | RNVC: 2
404075: RNCC: 5 | RNVC: 2
4407: RNCC: 5 | RNVC: 2
3245060980108: RNCC: 5 | RNVC: 2
98010: RNCC: 5 | RNVC: 2
5353219: RNCC: 5 | RNVC: 9
LG98010: RNCC: 5 | RNVC: 9

6 Mar 1985

5975-14-516-6860
Ground Rod

145166860
46944908: RNCC: 3 | RNVC: 2

12 Oct 1999

5975-33-103-5039
Conduit Outlet

331035039
5094: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-14-437-4467
Cable Hanger

144374467
332A61-1221-00: RNCC: 3 | RNVC: 2

31 Jan 1990

5975-14-383-9534
Cable Marker Sleeve

143839534
78-15CXZ5S30LAB123JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ5S30JLAB123: RNCC: 5 | RNVC: 2
78-15CXZ5S30LAB123J: RNCC: 5 | RNVC: 2

4 May 1983

5975-14-421-0074
Interior Cable Rack

144210074
39232879: RNCC: 3 | RNVC: 2
39232879: RNCC: 5 | RNVC: 9

6 Jan 1988

5975-33-001-6242
Junction Box

330016242
3002: RNCC: 3 | RNVC: 2

15 Nov 1989

5975-14-479-2839
Stuffing Tube Plug

144792839
250902: RNCC: 3 | RNVC: 2

4 Jan 1996

5975-14-501-5814
Metallic Raceway

145015814
46158798: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-14-485-4546
Interconnecting Box

144854546
434329: RNCC: 3 | RNVC: 2
434329-001: RNCC: 5 | RNVC: 9
KE*606: RNCC: 5 | RNVC: 9

23 Jan 1997

5975-33-003-7267
Conduit Outlet

330037267
4160-336: RNCC: 3 | RNVC: 2

4 Jun 1998

5975-14-499-0405
Cable Marker Sleeve

144990405
12450716-7: RNCC: 3 | RNVC: 2
P075N4NR: RNCC: 3 | RNVC: 2
F300 0T 016 2053: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-33-204-7669
Interconnecting Box

332047669
1025901555: RNCC: 3 | RNVC: 2
9682.101.8151: RNCC: 5 | RNVC: 2

12 Jan 2006

5975-14-363-6684
Interior Cable Rack

143636684
KD300: RNCC: 3 | RNVC: 2

6 Jul 1980

5975-14-363-0624
Interior Cable Rack

143630624
611104500: RNCC: 3 | RNVC: 2

3 Apr 1980

5975-14-445-0382
Cable Marker Sleeve

144450382
1-170: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-549-8703
Metallic Raceway

145498703
2092745-S: RNCC: 3 | RNVC: 2

17 May 2006

5975-14-408-4547
Interior Cable Rack

144084547
LF40060: RNCC: 3 | RNVC: 2

1 Apr 1986

5975-33-002-0791
Junction Box Cover

330020791
4062-PG36: RNCC: 3 | RNVC: 2

15 Aug 1992

5975-27-028-2858
Metallic Raceway

270282858
40X40 DELIKLI: RNCC: 2 | RNVC: 1

19 Dec 2005

5975-14-418-5069
Cable Marker Sleeve

144185069
HT15-25BAR11-003: RNCC: 3 | RNVC: 2
11-003: RNCC: 5 | RNVC: 9
1-003: RNCC: 5 | RNVC: 9
HT15-25BA11-003: RNCC: 5 | RNVC: 9

26 Aug 1987

5975-14-500-2110
Interconnecting Box

145002110
11-010755-3: RNCC: 3 | RNVC: 2
F300 0T 024 2128: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-350-7830
Switch Box Case

143507830
319A77-03-229-010: RNCC: 3 | RNVC: 2
85-689-7058: RNCC: 6 | RNVC: 9

12 Jul 1978

5975-14-445-0470
Cable Marker Sleeve

144450470
7-003: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-426-4880
Cable Marker Sleeve

144264880
WBS3-A: RNCC: 3 | RNVC: 2

1 Sep 1988

5975-14-444-6854
Cable Marker Sleeve

144446854
1-024: RNCC: 3 | RNVC: 2

16 Jan 1991

5975-14-373-6167
Stuffing Tube

143736167
TH20C194-4: RNCC: 3 | RNVC: 2

13 Nov 1981

5975-33-002-0665
Rigid Metal Conduit

330020665
TUBO GALVANIZADO PG 1: RNCC: 3 | RNVC: 2

7 Aug 1992

5975-27-044-2298
Raceway Elbow

270442298
T DIRSEK, 25X40MM: RNCC: 2 | RNVC: 1

16 Jan 2009

5975-15-204-0225
Blank Panel

152040225
3AN50555AA: RNCC: 3 | RNVC: 2

19 Aug 2011

5975-14-445-0410
Cable Marker Sleeve

144450410
2-097: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-445-0336
Cable Marker Sleeve

144450336
1-081: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-338-0247
Guy

143380247
MANJ56-177-3: RNCC: 3 | RNVC: 2
MANJ56: RNCC: 5 | RNVC: 2

6 Nov 1976

5975-14-360-3515
Junction Box

143603515
133320: RNCC: 3 | RNVC: 2
32094: RNCC: 5 | RNVC: 2
BJ-308A: RNCC: 6 | RNVC: 9

23 Nov 1979

5975-14-435-9876
Junction Box

144359876
BJ2715-0301: RNCC: 3 | RNVC: 2

29 Nov 1989

5975-15-127-7171
Cable Collar

151277171
5120-9: RNCC: 3 | RNVC: 2

9 Oct 1996

5975-14-507-6836
Chassis Base

145076836
21552664-4: RNCC: 3 | RNVC: 2

12 Aug 1998

5975-14-503-8305
Ground Rod

145038305
545685: RNCC: 3 | RNVC: 2

30 Jan 1998

5975-14-426-4885
Cable Marker Sleeve

144264885
WBS3-4-X: RNCC: 3 | RNVC: 2

1 Sep 1988

5975-14-549-6766
Interior Cable Rack

145496766
2716354730: RNCC: 3 | RNVC: 2

26 Apr 2006

5975-14-428-8498
Interconnecting Box

144288498
16932822: RNCC: 3 | RNVC: 2

22 Dec 1988

5975-14-485-2450
Interior Cable Rack

144852450
421583: RNCC: 3 | RNVC: 2
421583: RNCC: 5 | RNVC: 2
421583: RNCC: 5 | RNVC: 2

14 Jan 1997

5975-14-437-4477
Cable Hanger

144374477
332A61-1244-22: RNCC: 3 | RNVC: 2

31 Jan 1990

5975-14-356-9371
Cable Marker Sleeve

143569371
036002090053: RNCC: 3 | RNVC: 2
360108REP3: RNCC: 5 | RNVC: 2
360209REP3: RNCC: 5 | RNVC: 2
3597470041086: RNCC: 5 | RNVC: 2
V50-0RANGEREP3: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-306-3314
Junction Box Cover

143063314
121E64-205-50-0: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-296-9365
Push Button

142969365
NO PRIMARY REF14-296-9365: RNCC: 3 | RNVC: 2
1210033: RNCC: 5 | RNVC: 9

1 Jan 1973

5975-14-350-1444
Stuffing Tube

143501444
5975CABVLE7: RNCC: 2 | RNVC: 2
509700-AMIANTE: RNCC: 3 | RNVC: 9
50970: RNCC: 5 | RNVC: 2
BVLE7: RNCC: 5 | RNVC: 2
5975CA-BVLE7: RNCC: 5 | RNVC: 2

14 Jun 1978

5975-14-362-6101
Cable Marker Sleeve

143626101
360110REPY: RNCC: 3 | RNVC: 2
HOI85-4RO-Y: RNCC: 3 | RNVC: 2
V65REPY: RNCC: 5 | RNVC: 2
HOI85Y: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-27-059-3213
Junction Box

270593213
110X110X50: RNCC: 5 | RNVC: 9

12 Jul 2013

5975-27-026-0558
Junction Box

270260558
89302: RNCC: 2 | RNVC: 1
89302: RNCC: 2 | RNVC: 1

27 May 2005

5975-14-546-1316
Raceway Elbow

145461316
01736: RNCC: 3 | RNVC: 2
NIAV 200X80 W0: RNCC: 5 | RNVC: 2
AA016616: RNCC: 6 | RNVC: 9

14 Jun 2005

5975-15-121-5864
Blank Panel

151215864
ADF7605: RNCC: 3 | RNVC: 2

24 Jun 1999

5975-14-546-1325
Raceway Cover

145461325
28338: RNCC: 3 | RNVC: 2
AA016642: RNCC: 6 | RNVC: 9

14 Jun 2005

5975-14-509-1083
Ground Rod

145091083
JVJT203001: RNCC: 3 | RNVC: 2

21 Oct 1998

5975-33-211-2516
Blank Panel

332112516
MD17/2: RNCC: 3 | RNVC: 2

27 Jul 2013

5975-14-349-8211
Ground Rod

143498211
Y46286: RNCC: 3 | RNVC: 2
SDMY46286: RNCC: 5 | RNVC: 9
Y46286: RNCC: 5 | RNVC: 9

14 Jun 1978

5975-14-544-5424
Raceway Elbow

145445424
AA003519: RNCC: 3 | RNVC: 2
MTA4046: RNCC: 5 | RNVC: 2

9 Feb 2005

5975-15-153-5464
Blank Panel

151535464
999-0500-90-145: RNCC: 3 | RNVC: 2

12 Feb 2001

5975-14-238-2705
Cable Marker Sleeve

142382705
352005REP1: RNCC: 3 | RNVC: 2
99044460: RNCC: 3 | RNVC: 2
352-05REP1: RNCC: 5 | RNVC: 2
HELAVIATWIN4REP1: RNCC: 5 | RNVC: 2
99044460: RNCC: 5 | RNVC: 2
99044460: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-33-211-5291
Stuffing Tube

332115291
EN50262-M25X1,5 MS EMV: RNCC: 2 | RNVC: 2
1000.25.85.190: RNCC: 3 | RNVC: 2
0738125: RNCC: 5 | RNVC: 2

24 Nov 2013

5975-14-553-4690
Cable Marker Sleeve

145534690
0084101190: RNCC: 3 | RNVC: 2

5 Apr 2007

5975-14-500-5269
Nonmetallic Raceway

145005269
31371: RNCC: 3 | RNVC: 2
F300 0T 024 5442: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-282-5327
Cable Marker Sleeve

142825327
9131499: RNCC: 3 | RNVC: 2
9131499: RNCC: 5 | RNVC: 9

1 Jan 1971

5975-14-518-6538
Raceway Elbow

145186538
030333: RNCC: 3 | RNVC: 2
30333: RNCC: 5 | RNVC: 2
3245060303334: RNCC: 5 | RNVC: 2

9 Feb 2000

5975-14-481-2104
Raceway Cover

144812104
030916: RNCC: 3 | RNVC: 2
30916: RNCC: 5 | RNVC: 2
3245060309169: RNCC: 5 | RNVC: 2
5226058: RNCC: 5 | RNVC: 9
LG30916: RNCC: 5 | RNVC: 9

25 Apr 1996

5975-14-345-7224
Blank Panel

143457224
20110: RNCC: 3 | RNVC: 2

5 Oct 1977

5975-14-287-0721
Cable Marker Sleeve

142870721
MGCM3BA10-20: RNCC: 3 | RNVC: 2
9554819200: RNCC: 5 | RNVC: 2
MGCM3BA10-20: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-455-6629
Metallic Raceway

144556629
80-300972-5: RNCC: 3 | RNVC: 2

5 Jun 1992

5975-14-420-0720
Conduit Outlet

144200720
NO PRIMARY REF14-420-0720: RNCC: 3 | RNVC: 2
89165984: RNCC: 5 | RNVC: 2
8-8D3-2-31: RNCC: 5 | RNVC: 9

18 Nov 1987

5975-14-294-2536
Runner

142942536
121A63-104-03-1: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-512-0228
Raceway Elbow

145120228
L2715RAL9001: RNCC: 3 | RNVC: 2
L2715RAL9001: RNCC: 5 | RNVC: 2
L2715BLANC: RNCC: 5 | RNVC: 2

2 Feb 1999

5975-33-002-0790
Junction Box Cover

330020790
4062-PG13: RNCC: 3 | RNVC: 2

15 Aug 1992

5975-27-021-2697
Cable Collar

270212697
10131MK0679: RNCC: 2 | RNVC: 1

15 Dec 2003

5975-14-434-7689
Stuffing Tube

144347689
28188097000-8: RNCC: 3 | RNVC: 2

4 Oct 1989

5975-14-362-4232
Cable Marker Sleeve

143624232
78-15CXZ3-5S30B: RNCC: 3 | RNVC: 2
78-15CXZ3-5S30BLEU: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-545-9731
Cable Marker Sleeve

145459731
03740140004L: RNCC: 3 | RNVC: 2
03740140004L: RNCC: 5 | RNVC: 2
6070-GT-0000110: RNCC: 5 | RNVC: 9

31 May 2005

5975-14-391-2421
Cable Marker Sleeve

143912421
03620005001V: RNCC: 3 | RNVC: 2
3597470045510: RNCC: 5 | RNVC: 2
362005-01REPV: RNCC: 5 | RNVC: 2
362005REPV: RNCC: 5 | RNVC: 2

1 Mar 1984

5975-27-028-0771
Junction Box

270280771
45023: RNCC: 2 | RNVC: 1
GECMELI KASA: RNCC: 5 | RNVC: 9

29 Nov 2005

5975-14-361-3193
Fanning Strip

143613193
D81: RNCC: 3 | RNVC: 2

24 Jan 1980

5975-14-541-1518
Ground Rod

145411518
210786: RNCC: 3 | RNVC: 2

14 May 2004

5975-14-256-6462
Guy

142566462
MARJ125: RNCC: 3 | RNVC: 2
GC1231: RNCC: 5 | RNVC: 2
205-3: RNCC: 5 | RNVC: 2

1 Jan 1969

5975-15-201-1441
Junction Box Cover

152011441
C68325: RNCC: 3 | RNVC: 2

6 Jun 2006

5975-14-486-1313
Interior Cable Rack

144861313
52811023: RNCC: 3 | RNVC: 2

5 Mar 1997

5975-14-226-5840
Stuffing Tube

142265840
200612: RNCC: 3 | RNVC: 2

1 Jan 1966

5975-14-407-0632
Junction Box Cover

144070632
6H4-81916-00: RNCC: 3 | RNVC: 2

29 Jan 1986

5975-14-525-2365
Cable Marker Sleeve

145252365
06810P015022: RNCC: 3 | RNVC: 2

23 May 2001

5975-27-028-0056
Metallic Raceway

270280056
50X40X1MM GALVANIZLI: RNCC: 2 | RNVC: 1
50X40X1MM: RNCC: 2 | RNVC: 1

25 Nov 2005

5975-14-485-1055
Raceway Cover

144851055
421129: RNCC: 3 | RNVC: 2
421129: RNCC: 5 | RNVC: 2
421129: RNCC: 5 | RNVC: 2

8 Jan 1997

5975-14-419-1154
Junction Box

144191154
ET32467D: RNCC: 3 | RNVC: 9
BJ-238A: RNCC: 6 | RNVC: 9

30 Sep 1987

5975-14-423-3571
Junction Box Cover

144233571
160G742023-02: RNCC: 3 | RNVC: 2

14 Apr 1988

5975-14-384-7198
Rigid Metal Conduit

143847198
16761696: RNCC: 3 | RNVC: 2
16761696: RNCC: 5 | RNVC: 9

2 Jun 1983

5975-14-485-1041
Raceway Cover

144851041
421015: RNCC: 3 | RNVC: 2
421015: RNCC: 5 | RNVC: 2
421015: RNCC: 5 | RNVC: 2

8 Jan 1997

5975-14-416-7242
Cable Marker Sleeve

144167242
HT15-25BA11-073: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-33-106-8066
Interconnecting Box

331068066
R063540-01: RNCC: 3 | RNVC: 2

31 Mar 1999

5975-14-312-8098
Stuffing Tube Plug

143128098
5975CA0B1: RNCC: 2 | RNVC: 2
509140: RNCC: 3 | RNVC: 2
350917: RNCC: 5 | RNVC: 2
5975CA-OB1: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-238-2721
Cable Marker Sleeve

142382721
99008780: RNCC: 3 | RNVC: 2
352004REP3: RNCC: 3 | RNVC: 2
RAR4637: RNCC: 5 | RNVC: 2
352-04REP3: RNCC: 5 | RNVC: 2
99008780: RNCC: 5 | RNVC: 2
HELAVIATWIN3REP3: RNCC: 5 | RNVC: 2
99008780: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-309-6683
Junction Box

143096683
121E63-234-10-0M1: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-331-5347
Junction Box

143315347
GSM524-034REP1: RNCC: 3 | RNVC: 2
A0166-008REP1: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-514-8285
Junction Box

145148285
915-702: RNCC: 3 | RNVC: 2
915-702: RNCC: 3 | RNVC: 2

21 Jun 1999

5975-14-224-0018
Stuffing Tube

142240018
121100: RNCC: 3 | RNVC: 2
PES012110: RNCC: 5 | RNVC: 1
PES011: RNCC: 5 | RNVC: 2
12110: RNCC: 5 | RNVC: 2

1 Jan 1966

5975-14-445-0371
Cable Marker Sleeve

144450371
1-133: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-475-6645
Guy

144756645
13458: RNCC: 3 | RNVC: 2
2008458: RNCC: 5 | RNVC: 2

26 Apr 1995

5975-33-200-8242
Stuffing Tube

332008242
7062.412.0040: RNCC: 3 | RNVC: 2
4710700049: RNCC: 5 | RNVC: 2

14 Mar 2002

5975-14-504-3671
Metallic Raceway

145043671
22114-454: RNCC: 3 | RNVC: 2

11 Feb 1998

5975-14-475-3175
Cable Marker Sleeve

144753175
HT100-25JORLUNETTE: RNCC: 3 | RNVC: 2
HT100-25JOLUNETTE: RNCC: 5 | RNVC: 2

29 Mar 1995

5975-14-480-6282
Blank Panel

144806282
2022110: RNCC: 3 | RNVC: 2

21 Mar 1996

5975-14-444-8684
Blank Panel

144448684
39117791: RNCC: 3 | RNVC: 9

23 Jan 1991

5975-14-358-9702
Interconnecting Box

143589702
530659: RNCC: 3 | RNVC: 2
530659: RNCC: 5 | RNVC: 9

26 Mar 1997

5975-14-319-4377
Junction Box

143194377
BJ1646A: RNCC: 3 | RNVC: 2
BJ-297A: RNCC: 6 | RNVC: 9
85-686-9198: RNCC: 6 | RNVC: 9

1 Jan 1975

5975-14-535-0324
Interior Cable Rack

145350324
NO PRIMARY REF14-535-0324: RNCC: 3 | RNVC: 2
0126009: RNCC: 5 | RNVC: 9
SC086622: RNCC: 6 | RNVC: 9

30 Apr 2003

5975-14-517-0894
Interconnecting Box

145170894
4409-34: RNCC: 3 | RNVC: 2

3 Nov 1999

5975-14-426-4872
Cable Marker Sleeve

144264872
WBS3-1: RNCC: 3 | RNVC: 2

1 Sep 1988

5975-14-485-1078
Raceway Cover

144851078
421584-2: RNCC: 3 | RNVC: 2
421892: RNCC: 3 | RNVC: 2
421584: RNCC: 5 | RNVC: 2
421892: RNCC: 5 | RNVC: 2
421584: RNCC: 5 | RNVC: 2

8 Jan 1997

5975-14-496-8643
Interconnecting Box

144968643
14221-12503-00: RNCC: 3 | RNVC: 2
F300 0T 022 2127: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-440-5098
Cable Marker Sleeve

144405098
20130532: RNCC: 3 | RNVC: 2
20130532: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-545-9328
Cable Marker Sleeve

145459328
03740120004I: RNCC: 3 | RNVC: 2
03740120004I: RNCC: 5 | RNVC: 2
6070-GT-0000070: RNCC: 5 | RNVC: 9

30 May 2005

5975-14-392-0753
Cable Marker Sleeve

143920753
320-049-301-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5975-14-416-7210
Cable Marker Sleeve

144167210
HT100-35GI: RNCC: 3 | RNVC: 2
HT100-35GI47433: RNCC: 5 | RNVC: 9

25 Jun 1987

5975-14-352-3070
Blank Panel

143523070
FPBS1/4: RNCC: 3 | RNVC: 2
FP680: RNCC: 5 | RNVC: 2
FPBS1-4: RNCC: 5 | RNVC: 2
85-689-4910: RNCC: 6 | RNVC: 9

16 Oct 1978

5975-14-521-2082
Cable Marker Sleeve

145212082
TS142545: RNCC: 3 | RNVC: 2

12 Jul 2000

5975-14-317-0532
Rigid Metal Conduit

143170532
160-79222-09A: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-517-7361
Cable Marker Sleeve

145177361
320-316-501-0: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-14-368-5636
Cable Marker Sleeve

143685636
362007-01REP9: RNCC: 3 | RNVC: 2
M50BLANCREP9: RNCC: 5 | RNVC: 2
H085-6BA9: RNCC: 5 | RNVC: 9

20 Feb 1981

5975-14-417-5380
Stuffing Tube

144175380
3153A408BREP2-08: RNCC: 3 | RNVC: 2
506048: RNCC: 5 | RNVC: 2

8 Jul 1987

5975-14-251-5635
Stuffing Tube

142515635
600704: RNCC: 3 | RNVC: 2
2207-4: RNCC: 5 | RNVC: 2
22074: RNCC: 5 | RNVC: 2
60074: RNCC: 5 | RNVC: 2
N0RMADIX7N: RNCC: 5 | RNVC: 2

1 Jan 1968

5975-14-471-4731
Cable Marker Sleeve

144714731
036200080018: RNCC: 3 | RNVC: 2
T286-471: RNCC: 5 | RNVC: 2
3597470047323: RNCC: 5 | RNVC: 2
362008REP8: RNCC: 5 | RNVC: 2

31 Aug 1994

5975-15-200-5925
Raceway Elbow

152005925
780007: RNCC: 3 | RNVC: 2
(241)AD751780007: RNCC: 5 | RNVC: 2

1 Feb 2006

5975-14-485-4544
Interconnecting Box

144854544
434335: RNCC: 3 | RNVC: 2
434335-001: RNCC: 5 | RNVC: 9
KE*604: RNCC: 5 | RNVC: 9

23 Jan 1997

5975-14-419-7139
Junction Box

144197139
M471-200001: RNCC: 3 | RNVC: 2

5 Nov 1987

5975-33-202-0543
Interconnecting Box

332020543
1025-901406: RNCC: 3 | RNVC: 2

2 Jan 2003

5975-14-306-4031
Junction Box

143064031
M5A661-10-800: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-33-107-1435
Cable Marker Sleeve

331071435
PCAMI/RP/0300000617: RNCC: 3 | RNVC: 2

30 Jun 1999

5975-14-395-0730
Cable Marker Sleeve

143950730
D51900-10: RNCC: 3 | RNVC: 2
D51900-10: RNCC: 5 | RNVC: 2

2 Oct 1984

5975-14-408-1418
Junction Box

144081418
M04-3410A7701: RNCC: 3 | RNVC: 2

19 Mar 1986

5975-14-309-0014
Cable Marker Sleeve

143090014
78-15CXSFA2-5X0-6X15PCRR0UGE: RNCC: 3 | RNVC: 2
0084040010: RNCC: 5 | RNVC: 2
78-15CXSFA2-5X0-6X15PCRR0UGE: RNCC: 5 | RNVC: 9

1 Jan 1974

5975-14-541-8361
Cable Marker Sleeve

145418361
88179-1341: RNCC: 3 | RNVC: 2

26 Jun 2004

5975-14-402-6126
Cable Marker Sleeve

144026126
TMSNR501GBLANC: RNCC: 3 | RNVC: 9
12451240-2: RNCC: 5 | RNVC: 2

19 Jul 1985

5975-14-342-0126
Guy

143420126
NO PRIMARY REF14-342-0126: RNCC: 3 | RNVC: 2
C124003: RNCC: 5 | RNVC: 9

14 Apr 1977

5975-14-513-9646
Cable Hanger

145139646
312-10847-001: RNCC: 3 | RNVC: 2

20 Apr 1999

5975-14-541-8279
Cable Marker Sleeve

145418279
88179-1185: RNCC: 3 | RNVC: 2

26 Jun 2004

5975-14-437-4489
Interior Cable Rack

144374489
332A61-1260-00: RNCC: 3 | RNVC: 2

31 Jan 1990

5975-27-041-1548
Nonmetallic Raceway

270411548
5975-TJ1-08868: RNCC: 2 | RNVC: 1

2 May 2008

5975-27-029-6901
Blank Panel

270296901
MA-0000-0871/07: RNCC: 2 | RNVC: 1

2 May 2006

5975-14-233-9440
Stuffing Tube

142339440
65-80-1: RNCC: 3 | RNVC: 2
275211: RNCC: 3 | RNVC: 2
388665: RNCC: 5 | RNVC: 2
275211: RNCC: 5 | RNVC: 9
65-80-1: RNCC: 5 | RNVC: 9

1 Jan 1967

5975-14-377-0211
Cable Marker Sleeve

143770211
TMS3/16-9: RNCC: 3 | RNVC: 9
91436733: RNCC: 5 | RNVC: 2
TMS-3/16-48MM-9: RNCC: 5 | RNVC: 9
TMS3/16-48MMBLANC: RNCC: 5 | RNVC: 9
85-694-6165: RNCC: 6 | RNVC: 9

28 Apr 1982

5975-14-445-0464
Cable Marker Sleeve

144450464
6-089: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-33-105-0625
Stuffing Tube

331050625
956-04: RNCC: 3 | RNVC: 2

6 Mar 1996

5975-27-016-9413
Raceway Cover

270169413
4T62-400: RNCC: 2 | RNVC: 1
4T62-400: RNCC: 2 | RNVC: 1

16 Apr 2003

5975-14-473-9373
Cable Marker Sleeve

144739373
035200110044: RNCC: 3 | RNVC: 2
352011REP4: RNCC: 5 | RNVC: 2
3597470262160: RNCC: 5 | RNVC: 2
782112000443: RNCC: 5 | RNVC: 2
6070-GT-0000078: RNCC: 5 | RNVC: 9
782112000443: RNCC: 5 | RNVC: 9

18 Jan 1995

5975-14-452-0243
Cable Marker Sleeve

144520243
426144-01: RNCC: 3 | RNVC: 2

18 Dec 1991

5975-14-384-4033
Cable Marker Sleeve

143844033
03620050001-: RNCC: 3 | RNVC: 2
3597470047965: RNCC: 5 | RNVC: 2
362050-01SYMB-: RNCC: 5 | RNVC: 2
362050-01SYMBM: RNCC: 5 | RNVC: 2
362050SYMBM: RNCC: 5 | RNVC: 2
M65BLANCSYMBM: RNCC: 5 | RNVC: 2

4 May 1983

5975-14-401-0102
Conduit Outlet

144010102
02-82-001B: RNCC: 3 | RNVC: 2
71CD004B: RNCC: 6 | RNVC: 9

21 May 1985

5975-14-416-7255
Cable Marker Sleeve

144167255
HT15-25BA11-086: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-477-9094
Junction Box

144779094
0201-25-04-01-01F2: RNCC: 3 | RNVC: 2

2 Oct 1995

5975-14-541-5620
Interconnecting Box

145415620
8196793-001: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-382-9323
Cable Marker Sleeve

143829323
25812: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-401-3052
Access Cover

144013052
229875: RNCC: 3 | RNVC: 2

5 Jun 1985

5975-14-354-3094
Push Button

143543094
511207: RNCC: 3 | RNVC: 2
141853: RNCC: 5 | RNVC: 2

30 Jan 1979

5975-14-338-6652
Junction Box

143386652
164037: RNCC: 3 | RNVC: 2

17 Dec 1976

5975-14-511-5460
Stuffing Tube

145115460
18999-1017-0001: RNCC: 3 | RNVC: 2

24 Dec 1998

5975-14-042-1041
Junction Box

140421041
121S63-230-10-07M1: RNCC: 3 | RNVC: 2

18 Jan 1977

5975-14-362-4227
Cable Marker Sleeve

143624227
78-15CXZ3-5S20N: RNCC: 3 | RNVC: 2
78-15CXZ3-5S20N0IR: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-366-4750
Cable Marker Sleeve

143664750
594501823: RNCC: 3 | RNVC: 2

20 Nov 1980

5975-27-056-5753
Cable Marker Sleeve

270565753
517034: RNCC: 5 | RNVC: 9

11 Apr 2012

5975-14-470-8193
Guide Rail

144708193
2015697B: RNCC: 3 | RNVC: 2

6 Jul 1994

5975-33-107-3649
Stuffing Tube

331073649
5970.000162: RNCC: 3 | RNVC: 2

27 Sep 1999

5975-14-393-5416
Cable Marker Sleeve

143935416
352011REPS: RNCC: 3 | RNVC: 2

7 Apr 1984

5975-14-422-2856
Fanning Strip

144222856
464930: RNCC: 3 | RNVC: 2
464930: RNCC: 5 | RNVC: 9

24 Feb 1988

5975-14-523-1870
Nonmetallic Raceway

145231870
45710244: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-14-524-1828
Conduit Outlet

145241828
2254010: RNCC: 3 | RNVC: 2

7 Mar 2001

5975-14-409-0341
Cable Marker Sleeve

144090341
P10-3-2JOG: RNCC: 3 | RNVC: 2
P10-3-2JORGNR: RNCC: 5 | RNVC: 2
12450681-8: RNCC: 5 | RNVC: 2

16 Apr 1986

5975-14-423-3568
Junction Box

144233568
160G742022-01: RNCC: 3 | RNVC: 2

14 Apr 1988

5975-14-466-0723
Cable Marker Sleeve

144660723
PR419-48302: RNCC: 3 | RNVC: 2

27 Oct 1993

5975-14-549-8778
Metallic Raceway

145498778
845-453: RNCC: 3 | RNVC: 2

17 May 2006

5975-14-427-7532
Junction Box

144277532
92220: RNCC: 3 | RNVC: 2
91346970: RNCC: 5 | RNVC: 2
922-20: RNCC: 5 | RNVC: 2
304-6762: RNCC: 5 | RNVC: 2
LG92220: RNCC: 5 | RNVC: 9
5315128: RNCC: 5 | RNVC: 9

9 Nov 1988

5975-14-505-4140
Interconnecting Box

145054140
NO PRIMARY REF14-505-4140: RNCC: 3 | RNVC: 2
12052005: RNCC: 5 | RNVC: 9

18 Mar 1998

5975-14-553-5831
Stuffing Tube

145535831
2598: RNCC: 3 | RNVC: 2
EPN250/M32: RNCC: 3 | RNVC: 2
EPN250/M32: RNCC: 5 | RNVC: 2

19 Apr 2007

5975-14-377-2078
Junction Box

143772078
187269: RNCC: 3 | RNVC: 2

17 May 1982

5975-14-523-1839
Nonmetallic Raceway

145231839
45706906: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-14-404-8341
Cable Marker Sleeve

144048341
29747437: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-356-9262
Cable Marker Sleeve

143569262
036002050072: RNCC: 3 | RNVC: 2
3597470040706: RNCC: 5 | RNVC: 2
V27R0UGEREP2: RNCC: 5 | RNVC: 2
360105REP2: RNCC: 5 | RNVC: 2
360205REP2: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-541-4783
Interconnecting Box

145414783
0-0350720-1: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-300-3192
Fanning Strip

143003192
15143762: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-402-4083
Cable Marker Sleeve

144024083
01PR0TMS2W3-16: RNCC: 1 | RNVC: 2
TMS3-16NR11U9: RNCC: 3 | RNVC: 2
HS048WE2DSU: RNCC: 5 | RNVC: 2
TMS3-16NR11U9: RNCC: 5 | RNVC: 9
TMSSCE2X316S1-9: RNCC: 5 | RNVC: 9

3 Jul 1985

5975-14-310-4885
Indicator Panel

143104885
A10-63-227-22-0: RNCC: 3 | RNVC: 2
A10-63-227-22-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-551-7484
Conduit Outlet

145517484
092042: RNCC: 3 | RNVC: 2
AA014806: RNCC: 6 | RNVC: 9

19 Oct 2006

5975-14-360-5597
Cable Marker Sleeve

143605597
16564552: RNCC: 3 | RNVC: 2
16564552: RNCC: 5 | RNVC: 9

23 Nov 1979

5975-33-107-9872
Blank Panel

331079872
ECMF-TP1: RNCC: 3 | RNVC: 2

2 Nov 2000

5975-14-420-7380
Junction Box

144207380
061777TTH20R1: RNCC: 3 | RNVC: 2

16 Dec 1987

5975-14-357-7136
Conduit Outlet

143577136
2502-45: RNCC: 3 | RNVC: 2

27 Jun 1979

5975-15-040-6203
Cable Collar

150406203
295202-22B: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-502-4053
Switch Box Case

145024053
R100-249-359POS1LEG6/H2828: RNCC: 3 | RNVC: 2
R100-249-359POS1LEG6: RNCC: 5 | RNVC: 2

12 Dec 1997

5975-14-434-7495
Stuffing Tube

144347495
NO PRIMARY REF14-434-7495: RNCC: 3 | RNVC: 2
498: RNCC: 5 | RNVC: 9

3 Oct 1989

5975-14-470-8105
Stuffing Tube

144708105
FLE4-234946REP3-07: RNCC: 3 | RNVC: 9
98450673025: RNCC: 5 | RNVC: 2

6 Jul 1994

5975-14-484-5011
Junction Box

144845011
4-8911-127: RNCC: 3 | RNVC: 9

21 Nov 1996

5975-14-310-4900
Indicator Panel

143104900
A10-63-227-12-0: RNCC: 3 | RNVC: 2
A10-63-227-12-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-426-2662
Nonmetallic Raceway

144262662
01-74-011P127: RNCC: 3 | RNVC: 2

11 Aug 1988

5975-14-360-5319
Interior Cable Rack

143605319
429011: RNCC: 3 | RNVC: 2
429011: RNCC: 5 | RNVC: 2
D107-364GC: RNCC: 5 | RNVC: 2

23 Nov 1979

5975-14-404-1841
Push Button

144041841
16798528: RNCC: 3 | RNVC: 2
16798528: RNCC: 3 | RNVC: 9

11 Sep 1985

5975-14-549-5331
Interconnecting Box

145495331
83535: RNCC: 3 | RNVC: 2

13 Apr 2006

5975-33-200-8891
Junction Box

332008891
W290698447300: RNCC: 3 | RNVC: 2

8 Apr 2002

5975-14-348-0472
Nonmetallic Raceway

143480472
969553: RNCC: 3 | RNVC: 2
969553: RNCC: 5 | RNVC: 9

29 Mar 1978

5975-14-520-2255
Cable Marker Sleeve

145202255
782113010543: RNCC: 3 | RNVC: 2
03520013004TER: RNCC: 3 | RNVC: 2
352013SYMBTERRE: RNCC: 5 | RNVC: 2
3597470263778: RNCC: 5 | RNVC: 2

17 May 2000

5975-33-201-0793
Blank Panel

332010793
8AQ 08621 ABAA: RNCC: 3 | RNVC: 2

29 Apr 2002

5975-27-056-5781
Cable Marker Sleeve

270565781
515047: RNCC: 5 | RNVC: 9

12 Apr 2012

5975-14-504-2909
Cable Marker Sleeve

145042909
3641281M1: RNCC: 3 | RNVC: 2

11 Feb 1998

5975-14-356-9163
Cable Marker Sleeve

143569163
03600103015A: RNCC: 3 | RNVC: 2
3597470035917: RNCC: 5 | RNVC: 2
360103REPA: RNCC: 5 | RNVC: 2
V16REPA: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-544-5406
Nonmetallic Raceway

145445406
030439: RNCC: 3 | RNVC: 2

9 Feb 2005

5975-14-521-2079
Cable Marker Sleeve

145212079
TS142542: RNCC: 3 | RNVC: 2

12 Jul 2000

5975-14-282-5332
Cable Marker Sleeve

142825332
9131506: RNCC: 3 | RNVC: 2
9131506: RNCC: 5 | RNVC: 9

1 Jan 1971

5975-14-515-1895
Interconnecting Box

145151895
25673590: RNCC: 3 | RNVC: 2
2567359O: RNCC: 5 | RNVC: 2

13 Jul 1999

5975-15-203-2081
Cable Marker Sleeve

152032081
A578A05-9: RNCC: 3 | RNVC: 2
(241)A0126A578A05-9: RNCC: 5 | RNVC: 2

28 Nov 2007

5975-14-516-0818
Metallic Raceway

145160818
MH1141F00: RNCC: 3 | RNVC: 2

8 Sep 1999

5975-14-409-0345
Cable Marker Sleeve

144090345
P10-3-2JOL: RNCC: 3 | RNVC: 2
P10-3-2JORLNR: RNCC: 5 | RNVC: 2
12450686-8: RNCC: 5 | RNVC: 2

16 Apr 1986

5975-14-301-8959
Cable Marker Sleeve

143018959
6103-5595: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-485-6277
Junction Box

144856277
17-2114: RNCC: 3 | RNVC: 2

6 Feb 1997

5975-14-445-4417
Cable Marker Sleeve

144454417
ML1111F00: RNCC: 3 | RNVC: 2

14 Feb 1991

5975-14-455-1770
Switch Box Case

144551770
F3015-23-1-71-91-001: RNCC: 3 | RNVC: 2
23-1-71-91-001: RNCC: 5 | RNVC: 2
71CE403P0053A: RNCC: 6 | RNVC: 9

7 May 1992

5975-14-362-6075
Cable Marker Sleeve

143626075
03600102015Y: RNCC: 3 | RNVC: 2
3597470035825: RNCC: 5 | RNVC: 2
360102REPY: RNCC: 5 | RNVC: 2
V11REPY: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-382-6240
Cable Marker Sleeve

143826240
96080551: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-483-1542
Insulator Bracket

144831542
06888: RNCC: 3 | RNVC: 2
3303430068884: RNCC: 5 | RNVC: 2

20 Aug 1996

5975-14-516-8356
Stuffing Tube

145168356
1590090014: RNCC: 3 | RNVC: 2

20 Oct 1999

5975-14-540-5255
Metallic Raceway

145405255
36611: RNCC: 3 | RNVC: 2
00126989: RNCC: 3 | RNVC: 2

1 Apr 2004

5975-27-009-9183
Junction Box Cover

270099183
98011141: RNCC: 2 | RNVC: 1

9 Oct 2001

5975-14-328-5211
Junction Box

143285211
D0104REP24: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-505-1334
Metallic Raceway

145051334
22014: RNCC: 3 | RNVC: 2

11 Mar 1998

5975-14-517-0242
Junction Box Cover

145170242
EA5M601-60-820: RNCC: 3 | RNVC: 2

28 Oct 1999

5975-14-383-0542
Cable Marker Sleeve

143830542
16899907: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-462-4369
Cable Hanger

144624369
LN400 019REPC3: RNCC: 3 | RNVC: 2

20 Apr 1993

5975-14-285-5530
Junction Box

142855530
8091B80613: RNCC: 3 | RNVC: 2

1 Jan 1972

5975-14-332-9165
Cable Marker Sleeve

143329165
7815CXZ5S30KD2150A: RNCC: 3 | RNVC: 2
500667: RNCC: 5 | RNVC: 9
7815CXZ5S30KD2150A: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-14-482-6125
Blank Panel

144826125
39059689: RNCC: 3 | RNVC: 2

18 Jul 1996

5975-14-344-8239
Stuffing Tube

143448239
PA467-15M11P201P205P209P211P212: RNCC: 3 | RNVC: 9

9 Sep 1977

5975-14-545-3054
Interconnecting Box

145453054
21023565-02-02: RNCC: 3 | RNVC: 2
21023565-02-01: RNCC: 3 | RNVC: 9

1 Apr 2005

5975-14-391-6986
Push Button

143916986
717303: RNCC: 3 | RNVC: 2
307-7233: RNCC: 5 | RNVC: 2

21 Mar 1984

5975-14-425-4660
Cable Marker Sleeve

144254660
20133085: RNCC: 3 | RNVC: 2
20133085: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-14-524-3553
Wire Strand Hanger

145243553
SD001PD020526: RNCC: 3 | RNVC: 2

14 Mar 2001

5975-14-511-2102
Interconnecting Box

145112102
27161300-0: RNCC: 3 | RNVC: 2

9 Dec 1998

5975-14-342-0072
Interior Cable Rack

143420072
C90D107SZ195: RNCC: 3 | RNVC: 2
C90D107SZ195: RNCC: 5 | RNVC: 2
102083: RNCC: 5 | RNVC: 9
C90D107SZ195: RNCC: 5 | RNVC: 9

14 Apr 1977

5975-33-108-3962
Cable Marker Sleeve

331083962
Q 314 196 104: RNCC: 3 | RNVC: 2

1 Mar 2001

5975-14-453-5747
Cable Marker Sleeve

144535747
BAZ9684: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-33-103-5037
Conduit Outlet

331035037
5033-C: RNCC: 3 | RNVC: 2

24 Apr 1995

5975-27-009-9590
Junction Box

270099590
98011082: RNCC: 2 | RNVC: 1

18 Oct 2001

5975-27-013-4354
Junction Box Cover

270134354
42005: RNCC: 2 | RNVC: 1
42005: RNCC: 2 | RNVC: 1
57110200: RNCC: 2 | RNVC: 1

14 Jun 2002

5975-14-356-9318
Cable Marker Sleeve

143569318
03600107015M: RNCC: 3 | RNVC: 2
360107REPM: RNCC: 5 | RNVC: 2
3597470037843: RNCC: 5 | RNVC: 2
V40REPM: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-550-0366
Cable Hanger

145500366
EA6M702-30-53: RNCC: 3 | RNVC: 2

30 May 2006

5975-14-365-3536
Cable Collar

143653536
330A63-6297-20: RNCC: 3 | RNVC: 2

19 Sep 1980

5975-14-445-6308
Cable Marker Sleeve

144456308
H090-6JO0: RNCC: 3 | RNVC: 2
H090-6J00: RNCC: 5 | RNVC: 2
5045025: RNCC: 5 | RNVC: 9

20 Feb 1991

5975-14-480-0128
Blank Panel

144800128
1977062: RNCC: 3 | RNVC: 2

21 Feb 1996

5975-14-448-5932
Conduit Outlet

144485932
5233-494-500: RNCC: 3 | RNVC: 2
BJ-WA009: RNCC: 5 | RNVC: 2

3 Jul 1991

5975-15-009-2655
Blank Panel

150092655
330-0005-01: RNCC: 3 | RNVC: 2

2 Jan 1980

5975-14-299-1219
Metallic Raceway

142991219
121E63-415-15-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-517-4655
Cable Marker Sleeve

145174655
320-317-201-0: RNCC: 3 | RNVC: 2

15 Dec 1999

5975-14-404-7272
Cable Marker Sleeve

144047272
39049078: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-031-8857
Cable Marker Sleeve

140318857
102398115: RNCC: 3 | RNVC: 2
0659203015: RNCC: 5 | RNVC: 2
102398115: RNCC: 5 | RNVC: 2

5 Jul 1980

5975-14-528-3389
Cable Marker Sleeve

145283389
1-140441-1: RNCC: 3 | RNVC: 2

23 Jan 2002

5975-14-433-2762
Junction Box

144332762
620-867-933-0: RNCC: 3 | RNVC: 2

19 Jul 1989

5975-14-462-4370
Cable Hanger

144624370
LN400 019REPC4: RNCC: 3 | RNVC: 2

20 Apr 1993

5975-27-056-7460
Ground Rod

270567460
ADOP-SHELTER-380-TK: RNCC: 2 | RNVC: 2

7 May 2012

5975-14-453-5784
Cable Marker Sleeve

144535784
BAZ9471: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-343-1952
Junction Box

143431952
15A270: RNCC: 3 | RNVC: 2

16 Jun 1977

5975-14-347-2598
Blank Panel

143472598
20003: RNCC: 3 | RNVC: 2

19 Jan 1978

5975-33-125-7116
Stuffing Tube

331257116
703498111002: RNCC: 3 | RNVC: 2

11 Jul 1995

5975-14-254-1166
Cable Marker Sleeve

142541166
352004REPS: RNCC: 3 | RNVC: 2
99026311: RNCC: 5 | RNVC: 2
HELAVIATWIN3REPS: RNCC: 5 | RNVC: 2
99026311: RNCC: 5 | RNVC: 9
99026311: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-364-6575
Cable Marker Sleeve

143646575
6-099: RNCC: 3 | RNVC: 2
ST400S58P205-099: RNCC: 5 | RNVC: 2
T0U099E15: RNCC: 5 | RNVC: 2

2 Sep 1980

5975-14-383-0036
Nonmetallic Raceway

143830036
4770202570: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-402-1132
Cable Marker Sleeve

144021132
401657: RNCC: 3 | RNVC: 2
BGE401657: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-041-5163
Chassis Base

140415163
107107: RNCC: 3 | RNVC: 2
107107: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-33-001-4464
Interior Cable Rack

330014464
92026350: RNCC: 3 | RNVC: 2

14 Nov 1989

5975-14-381-5989
Metallic Raceway

143815989
825032-13: RNCC: 3 | RNVC: 2
GE10X15S: RNCC: 5 | RNVC: 2

25 Jan 1983

5975-15-187-6075
Junction Box

151876075
100-1183/04: RNCC: 3 | RNVC: 2

14 Apr 2009

5975-14-412-6794
Push Button

144126794
BP2361A43: RNCC: 3 | RNVC: 2

23 Oct 1986

5975-14-330-6909
Cable Marker Sleeve

143306909
3009-98: RNCC: 3 | RNVC: 2
85-686-5146: RNCC: 6 | RNVC: 9

2 Jul 1975

5975-14-526-5928
Stuffing Tube

145265928
160-78825-037: RNCC: 3 | RNVC: 2

1 Aug 2001

5975-14-374-5394
Cable Marker Sleeve

143745394
P20-4-8NR0: RNCC: 3 | RNVC: 2
P20NR0: RNCC: 5 | RNVC: 2
P20-0: RNCC: 5 | RNVC: 2
91284021: RNCC: 5 | RNVC: 2

30 Jan 1982

5975-14-524-0268
Cable Marker Sleeve

145240268
2424-20: RNCC: 3 | RNVC: 2

22 Feb 2001

5975-14-469-7893
Interconnecting Box

144697893
45-0430: RNCC: 3 | RNVC: 2

10 May 1994

5975-15-120-8710
Cable Collar

151208710
309-5539-00: RNCC: 3 | RNVC: 2

4 Sep 1995

5975-15-205-3360
Junction Box

152053360
TSG0379/17: RNCC: 3 | RNVC: 2

2 Mar 2012

5975-14-456-9766
Cable Marker Sleeve

144569766
0702-006A004: RNCC: 3 | RNVC: 2
0702-006A004: RNCC: 5 | RNVC: 2

30 Jul 1992

5975-14-306-0537
Rigid Metal Conduit

143060537
A10-63-000-91-0: RNCC: 3 | RNVC: 2
A10-63-000-91-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-410-6635
Cable Marker Sleeve

144106635
100SP120-0134: RNCC: 3 | RNVC: 2

9 Jul 1986

5975-14-507-9912
Cable Marker Sleeve

145079912
25260-0005-03: RNCC: 3 | RNVC: 2
9398083038: RNCC: 5 | RNVC: 9

26 Aug 1998

5975-27-021-0382
Nonmetallic Raceway

270210382
5975-00111-00022: RNCC: 2 | RNVC: 1

15 Dec 2003

5975-14-352-2910
Guy

143522910
NO PRIMARY REF14-352-2910: RNCC: 3 | RNVC: 2
DHV2482R0UGE: RNCC: 5 | RNVC: 9

16 Oct 1978

5975-14-416-3129
Junction Box

144163129
0194061AX3122-AR: RNCC: 3 | RNVC: 2
488487J1: RNCC: 5 | RNVC: 2
89160082: RNCC: 5 | RNVC: 9
64CW012A: RNCC: 6 | RNVC: 9

3 Jun 1987

5975-14-270-9095
Cable Marker Sleeve

142709095
204335-1402A: RNCC: 3 | RNVC: 2
7815CXZ5S30KD1402AJ: RNCC: 5 | RNVC: 9

1 Jan 1970

5975-27-021-0378
Nonmetallic Raceway

270210378
5975-00111-00084: RNCC: 2 | RNVC: 1

15 Dec 2003

5975-14-481-9646
Stuffing Tube

144819646
242105: RNCC: 3 | RNVC: 2
2006-242105: RNCC: 5 | RNVC: 2

13 Jun 1996

5975-14-308-5565
Push Button

143085565
1001-4: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-250-6968
Guy

142506968
314-1560: RNCC: 3 | RNVC: 2
HB-1A: RNCC: 6 | RNVC: 9

1 Jan 1968

5975-14-545-9402
Cable Marker Sleeve

145459402
03740120004X: RNCC: 3 | RNVC: 2
03740120004X: RNCC: 5 | RNVC: 2
6070-GT-0000084: RNCC: 5 | RNVC: 9

30 May 2005

5975-27-041-6602
Metallic Raceway

270416602
WALL-MOUNT-370: RNCC: 2 | RNVC: 1

11 Jun 2008

5975-14-383-9516
Cable Marker Sleeve

143839516
78-15CXZ5S30LAB182JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ5S30LAB182J: RNCC: 5 | RNVC: 2
78-15CXZ5S30JLAB182: RNCC: 5 | RNVC: 2

4 May 1983

5975-14-391-2414
Cable Marker Sleeve

143912414
036200110061: RNCC: 3 | RNVC: 2
3597470141977: RNCC: 5 | RNVC: 2
362001-06REP1: RNCC: 5 | RNVC: 2
362011REP1: RNCC: 5 | RNVC: 2
H012-4MA1: RNCC: 5 | RNVC: 2

1 Mar 1984

5975-14-331-8050
Cable Marker Sleeve

143318050
620-844-152-0: RNCC: 3 | RNVC: 2
620-844-152-0: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-485-4551
Interconnecting Box

144854551
434327: RNCC: 3 | RNVC: 2
434327-001: RNCC: 5 | RNVC: 9
KE*612: RNCC: 5 | RNVC: 9

23 Jan 1997

5975-27-034-4774
Junction Box

270344774
3YOLLU: RNCC: 5 | RNVC: 9

11 Jan 2007

5975-14-456-4350
Cable Marker Sleeve

144564350
H030-4J04: RNCC: 3 | RNVC: 2

2 Jul 1992

5975-14-394-5696
Junction Box

143945696
264E8561-2200-004: RNCC: 3 | RNVC: 2
264E64346200013: RNCC: 5 | RNVC: 2

28 Aug 1984

5975-14-470-9098
Cable Marker Sleeve

144709098
807067-07: RNCC: 3 | RNVC: 2

13 Jul 1994

5975-14-311-4121
Junction Box

143114121
341A68-3652-00: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-537-8132
Junction Box

145378132
MJBHRZ00-00: RNCC: 3 | RNVC: 2

27 Nov 2003

5975-14-317-0530
Rigid Metal Conduit

143170530
160-79222-08A: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-393-5276
Cable Marker Sleeve

143935276
360110REP8: RNCC: 3 | RNVC: 2
HOI85-GI-8: RNCC: 3 | RNVC: 2
H0I85-8: RNCC: 5 | RNVC: 2
HOI85-8-8: RNCC: 5 | RNVC: 2
V65REP8: RNCC: 5 | RNVC: 2

7 Apr 1984

5975-14-353-9946
Cable Marker Sleeve

143539946
0294701090: RNCC: 3 | RNVC: 2
302-301-101-0: RNCC: 5 | RNVC: 2
302-301-101P: RNCC: 5 | RNVC: 2
620-857-295-0: RNCC: 5 | RNVC: 2

16 Jan 1979

5975-14-352-3342
Cable Marker Sleeve

143523342
353043-01REPC: RNCC: 3 | RNVC: 2

16 Oct 1978

5975-14-382-4426
Nonmetallic Raceway

143824426
4770202370: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-356-9308
Cable Marker Sleeve

143569308
03600107015C: RNCC: 3 | RNVC: 2
3597470037713: RNCC: 5 | RNVC: 2
360107REPC: RNCC: 5 | RNVC: 2
V40REPC: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-501-0362
Stuffing Tube

145010362
25356109: RNCC: 3 | RNVC: 2
F300 0T 025 0665: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-513-8744
Interconnecting Box

145138744
648187: RNCC: 3 | RNVC: 2

14 Apr 1999

5975-14-384-6635
Cable Marker Sleeve

143846635
96080790: RNCC: 3 | RNVC: 2

2 Jun 1983

5975-14-434-1816
Metallic Raceway

144341816
552748: RNCC: 3 | RNVC: 2

11 Sep 1989

5975-14-540-8855
Stuffing Tube

145408855
PYR6858A: RNCC: 3 | RNVC: 2

30 Apr 2004

5975-14-041-5159
Chassis Base

140415159
107097: RNCC: 3 | RNVC: 2
107097: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-555-8743
Nonmetallic Raceway

145558743
1756M1: RNCC: 3 | RNVC: 2

20 Dec 2007

5975-14-478-7018
Cable Collar

144787018
0320757090: RNCC: 3 | RNVC: 2

17 Nov 1995

5975-14-342-1370
Cable Marker Sleeve

143421370
S272237-11: RNCC: 3 | RNVC: 2
85-680-9701: RNCC: 6 | RNVC: 9

14 Apr 1977

5975-14-453-7732
Interior Cable Rack

144537732
SR55 TYPE1-300: RNCC: 3 | RNVC: 2
SR55 TYPE1-300: RNCC: 5 | RNVC: 2

10 Mar 1992

5975-14-526-6635
Stuffing Tube

145266635
222574: RNCC: 3 | RNVC: 2

17 Aug 2001

5975-14-468-0745
Interconnecting Box

144680745
LYN008055371120: RNCC: 3 | RNVC: 2

9 Feb 1994

5975-14-327-7009
Guy

143277009
NO PRIMARY REF14-327-7009: RNCC: 3 | RNVC: 2
632063: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-14-301-9479
Conduit Outlet

143019479
03610: RNCC: 3 | RNVC: 2
361: RNCC: 5 | RNVC: 2
251-5740: RNCC: 5 | RNVC: 2

1 Jan 1973

5975-14-391-2423
Cable Marker Sleeve

143912423
03620005001-: RNCC: 3 | RNVC: 2
362005-01SYMBM: RNCC: 5 | RNVC: 2
3597470045169: RNCC: 5 | RNVC: 2
362005SYMBM: RNCC: 5 | RNVC: 2

1 Mar 1984

5975-14-270-9116
Cable Marker Sleeve

142709116
204337-1404A: RNCC: 3 | RNVC: 2
7815CXZ11S30KD1404AJ: RNCC: 5 | RNVC: 9

1 Jan 1970

5975-14-325-3718
Stuffing Tube

143253718
511EL0033REPA: RNCC: 3 | RNVC: 2
511EL033REPA: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-384-3632
Push Button

143843632
BMC1-8CMSGN: RNCC: 3 | RNVC: 9

4 May 1983

5975-14-380-2990
Cable Marker Sleeve

143802990
D51900-15: RNCC: 3 | RNVC: 2
D51900-15: RNCC: 5 | RNVC: 2

8 Nov 1982

5975-14-378-4091
Fanning Strip

143784091
366A62-1226-00: RNCC: 3 | RNVC: 2

7 Mar 1996

5975-14-342-2767
Stuffing Tube

143422767
GSM426-014F7: RNCC: 3 | RNVC: 2
A0009-019F10: RNCC: 5 | RNVC: 2
GSM426-14F7: RNCC: 5 | RNVC: 2

14 Apr 1977

5975-15-203-7439
Stuffing Tube Plug

152037439
129-0407-09-101: RNCC: 3 | RNVC: 2
(241)A0126129-0407-09-101: RNCC: 5 | RNVC: 2

30 Jun 2011

5975-14-536-5166
Cable Collar

145365166
EL/00147: RNCC: 3 | RNVC: 2

28 Aug 2003

5975-15-153-1379
Cable Marker Sleeve

151531379
999-8001-76-207: RNCC: 3 | RNVC: 2

1 Dec 2000

5975-14-420-7543
Cable Marker Sleeve

144207543
ST400S58P202-115: RNCC: 3 | RNVC: 2
2-115: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-431-6159
Cable Marker Sleeve

144316159
P30-4-8J04: RNCC: 3 | RNVC: 2
P30J04: RNCC: 5 | RNVC: 2

26 Apr 1989

5975-14-371-3827
Junction Box

143713827
353-86-033: RNCC: 3 | RNVC: 2

5 Aug 1981

5975-14-535-0317
Metallic Raceway

145350317
NO PRIMARY REF14-535-0317: RNCC: 3 | RNVC: 2
0126109: RNCC: 5 | RNVC: 9
SC086607: RNCC: 6 | RNVC: 9

30 Apr 2003

5975-14-285-7029
Rigid Metal Conduit

142857029
303197: RNCC: 3 | RNVC: 2

1 Jan 1972

5975-14-544-9478
Interconnecting Box

145449478
10708332000: RNCC: 3 | RNVC: 2

7 Mar 2005

5975-14-453-5775
Cable Marker Sleeve

144535775
BAZ9455: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-27-055-3791
Ground Rod

270553791
CUBUK TOPRAKLAMA ICIN: RNCC: 5 | RNVC: 9

2 Dec 2011

5975-14-495-2689
Interconnecting Box

144952689
10368612: RNCC: 3 | RNVC: 2
F300 0T 018 9134: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-445-0362
Cable Marker Sleeve

144450362
1-123: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-484-9003
Interconnecting Box

144849003
189316-240: RNCC: 3 | RNVC: 9

12 Dec 1996

5975-14-368-5614
Cable Marker Sleeve

143685614
036200140053: RNCC: 3 | RNVC: 2
T286-446: RNCC: 5 | RNVC: 2
3597470142264: RNCC: 5 | RNVC: 2
362014-05REP3: RNCC: 5 | RNVC: 2
362014REP3: RNCC: 5 | RNVC: 2
M27-0RANGEREP3: RNCC: 5 | RNVC: 2
H040-60R3: RNCC: 5 | RNVC: 9

20 Feb 1981

5975-14-475-3193
Cable Marker Sleeve

144753193
HT150-35JORW043709: RNCC: 3 | RNVC: 2
HT150-35JOW043709: RNCC: 5 | RNVC: 2

29 Mar 1995

5975-14-445-6321
Cable Marker Sleeve

144456321
H085-4MA1: RNCC: 3 | RNVC: 2

20 Feb 1991

5975-14-419-1153
Junction Box

144191153
ET32468D: RNCC: 3 | RNVC: 9
BJ-239A: RNCC: 6 | RNVC: 9

30 Sep 1987

5975-14-463-8666
Blank Panel

144638666
045A37-565342W: RNCC: 3 | RNVC: 2
0565342W00: RNCC: 5 | RNVC: 2
89275889: RNCC: 5 | RNVC: 2

30 Jun 1993

5975-14-545-9701
Cable Marker Sleeve

145459701
03740140004R: RNCC: 3 | RNVC: 2
03740140004R: RNCC: 5 | RNVC: 2
6070-GT-0000096: RNCC: 5 | RNVC: 9

31 May 2005

5975-14-542-5284
Cable Marker Sleeve

145425284
2594-227: RNCC: 3 | RNVC: 2

21 Jul 2004

5975-14-456-4367
Cable Marker Sleeve

144564367
H050-4MA1: RNCC: 3 | RNVC: 2

2 Jul 1992

5975-14-459-6808
Interconnecting Box

144596808
A10125-02-5000P001: RNCC: 3 | RNVC: 2
44032252: RNCC: 3 | RNVC: 2
44032252: RNCC: 5 | RNVC: 9

10 Dec 1992

5975-14-455-7590
Stuffing Tube

144557590
AE-1023: RNCC: 3 | RNVC: 9
618985: RNCC: 5 | RNVC: 9
AE1023: RNCC: 5 | RNVC: 9

11 Jun 1992

5975-14-520-2184
Interconnecting Box

145202184
132-000: RNCC: 3 | RNVC: 2
P045477: RNCC: 3 | RNVC: 2

17 May 2000

5975-14-316-2401
Junction Box

143162401
620-842-651-0: RNCC: 3 | RNVC: 2
620-842-651-0: RNCC: 5 | RNVC: 2

1 Jan 1975

5975-14-331-0811
Push Button

143310811
LUF44F3550-17820AV10: RNCC: 3 | RNVC: 2
17820AV10: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-14-402-1114
Cable Marker Sleeve

144021114
401625: RNCC: 3 | RNVC: 2
BGE401625: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-408-8794
Guide Rail

144088794
HL105P2-103-4: RNCC: 2 | RNVC: 2
00175110300: RNCC: 3 | RNVC: 2
C93-462: RNCC: 4 | RNVC: 1
175-110-300: RNCC: 5 | RNVC: 2
75502-03: RNCC: 5 | RNVC: 2
1 016 146 C 02: RNCC: 5 | RNVC: 2
JK4102: RNCC: 5 | RNVC: 2
001751-103-00: RNCC: 5 | RNVC: 2

2 Apr 1986

5975-14-461-5511
Interconnecting Box

144615511
F3015-23-1-82-91-007: RNCC: 3 | RNVC: 2
82JJ101P0049A: RNCC: 6 | RNVC: 9

17 Mar 1993

5975-14-547-5733
Cable Marker Sleeve

145475733
RD25 3-4-0-35MMMARQUE193730: RNCC: 3 | RNVC: 2
RT25 3-4-35MMOMARQUE193730: RNCC: 5 | RNVC: 9

17 Oct 2005

5975-14-404-7259
Cable Marker Sleeve

144047259
39048974: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-431-0938
Stuffing Tube

144310938
211605: RNCC: 3 | RNVC: 2

5 Apr 1989

5975-14-362-6064
Cable Marker Sleeve

143626064
03600102015N: RNCC: 3 | RNVC: 2
V11REPN: RNCC: 5 | RNVC: 2
360102REPN: RNCC: 5 | RNVC: 2
3597470035665: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-555-7543
Cable Hanger

145557543
P504145: RNCC: 3 | RNVC: 2

11 Dec 2007

5975-14-495-1356
Interconnecting Box

144951356
10126739: RNCC: 3 | RNVC: 2
F300 0T 018 4227: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-465-9101
Cable Marker Sleeve

144659101
03600107015-: RNCC: 3 | RNVC: 2
360107SYMBM: RNCC: 5 | RNVC: 2
3597470037645: RNCC: 5 | RNVC: 2
360107SYMBMOINS: RNCC: 5 | RNVC: 2

18 Oct 1993

5975-33-211-5340
Stuffing Tube

332115340
EN50262-M32X1,5 MS: RNCC: 2 | RNVC: 2
1000.32.170: RNCC: 3 | RNVC: 2
07431005: RNCC: 5 | RNVC: 2

24 Nov 2013

5975-27-021-0386
Nonmetallic Raceway

270210386
5975-00111-00027: RNCC: 2 | RNVC: 1

19 Oct 2004

5975-14-345-2230
Junction Box Cover

143452230
FF1E601-10965: RNCC: 3 | RNVC: 2

5 Oct 1977

5975-15-202-3289
Blank Panel

152023289
205-1600-18-111: RNCC: 3 | RNVC: 2
(241)A0126205-1600-18-111: RNCC: 5 | RNVC: 2

27 Feb 2007

5975-14-547-2296
Stuffing Tube

145472296
862885-1: RNCC: 3 | RNVC: 2

5 Oct 2005

5975-15-148-2077
Cable Collar

151482077
TIPO 9086: RNCC: 3 | RNVC: 2
276.201.035: RNCC: 5 | RNVC: 2

2 Jul 1998

5975-14-544-5403
Nonmetallic Raceway

145445403
030313: RNCC: 3 | RNVC: 2

9 Feb 2005

5975-27-050-5991
Junction Box

270505991
14-18: RNCC: 5 | RNVC: 9

9 Aug 2010

5975-27-039-1407
Junction Box

270391407
402003-05: RNCC: 5 | RNVC: 9

15 Nov 2007

5975-14-389-7364
Stuffing Tube

143897364
NO PRIMARY REF14-389-7364: RNCC: 3 | RNVC: 2
BV1AG50BT: RNCC: 5 | RNVC: 9

20 Dec 1983

5975-14-424-9876
Cable Marker Sleeve

144249876
HT50-25J0105: RNCC: 3 | RNVC: 2

16 Jun 1988

5975-14-291-2940
Push Button

142912940
NO PRIMARY REF14-291-2940: RNCC: 3 | RNVC: 2
39490-66001: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-485-2452
Interior Cable Rack

144852452
421613: RNCC: 3 | RNVC: 2
421613: RNCC: 5 | RNVC: 2
421613: RNCC: 5 | RNVC: 2

14 Jan 1997

5975-14-528-0008
Stuffing Tube

145280008
HCZA0020-OXYGENE: RNCC: 3 | RNVC: 2
JLPMA4L*00100: RNCC: 7 | RNVC: 1

7 Dec 2001

5975-14-384-6836
Cable Marker Sleeve

143846836
20247693: RNCC: 3 | RNVC: 2

2 Jun 1983

5975-14-418-4981
Interior Cable Rack

144184981
4771905250: RNCC: 3 | RNVC: 2

26 Aug 1987

5975-33-211-3346
Junction Box

332113346
0738202510: RNCC: 3 | RNVC: 2

24 Sep 2013

5975-14-299-1208
Metallic Raceway

142991208
121E63-413-06-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-543-6404
Switch Box Case

145436404
21251039-00: RNCC: 3 | RNVC: 2

27 Nov 2004

5975-14-339-4479
Cable Marker Sleeve

143394479
620-849-373-0: RNCC: 3 | RNVC: 2
620-849-373-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-326-1547
Cable Collar

143261547
201-414-069REP7T0C23-1: RNCC: 3 | RNVC: 2

2 Jul 1975

Load More Results