What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 116 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 116of 491

5975-14-357-8570
Cable Marker Sleeve

143578570
3511 131 32401: RNCC: 3 | RNVC: 2
3511-131-32401: RNCC: 5 | RNVC: 2

20 Jul 1979

5975-14-534-1229
Junction Box

145341229
332P64-1210-14: RNCC: 3 | RNVC: 2

12 Mar 2003

5975-14-545-8980
Cable Marker Sleeve

145458980
03740150004C: RNCC: 3 | RNVC: 2
03740150004C: RNCC: 5 | RNVC: 2
6070-GT-0000027: RNCC: 5 | RNVC: 9

25 May 2005

5975-14-362-4231
Cable Marker Sleeve

143624231
78-15CXZ3-5S20B: RNCC: 3 | RNVC: 2
78-15CXZ3-5S20BLEU: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-226-8499
Junction Box

142268499
11-000-108: RNCC: 3 | RNVC: 2

1 Jan 1966

5975-14-526-5927
Stuffing Tube

145265927
160-78829-035: RNCC: 3 | RNVC: 2

1 Aug 2001

5975-14-517-5726
Cable Hanger

145175726
AR.PL.37: RNCC: 3 | RNVC: 2
78765-040: RNCC: 5 | RNVC: 2
78765-040-083: RNCC: 5 | RNVC: 2

5 Jan 2000

5975-14-547-5729
Cable Marker Sleeve

145475729
DR25 3-4-0-35MMMARQUE193729: RNCC: 3 | RNVC: 2
RT25 3-4-35MMOMARQUE193729: RNCC: 5 | RNVC: 9

17 Oct 2005

5975-14-466-0705
Cable Marker Sleeve

144660705
PR181-48302: RNCC: 3 | RNVC: 2

27 Oct 1993

5975-14-475-4988
Cable Marker Sleeve

144754988
03690001004G: RNCC: 3 | RNVC: 2
782114005343: RNCC: 5 | RNVC: 2
3597470053386: RNCC: 5 | RNVC: 2
369001REPG: RNCC: 5 | RNVC: 2
M-65-M2REPG: RNCC: 5 | RNVC: 2
782114005343: RNCC: 5 | RNVC: 9

12 Apr 1995

5975-14-385-2632
Junction Box

143852632
065R32-715532P: RNCC: 3 | RNVC: 2

26 Jul 1983

5975-14-453-5797
Cable Marker Sleeve

144535797
BAZ11711: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-404-8446
Cable Marker Sleeve

144048446
29747548: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-440-5125
Cable Marker Sleeve

144405125
20133610: RNCC: 3 | RNVC: 2
20133610: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-433-5131
Metallic Raceway

144335131
G230574: RNCC: 3 | RNVC: 2

2 Aug 1989

5975-14-449-0244
Junction Box

144490244
20324751: RNCC: 3 | RNVC: 2
20324751: RNCC: 5 | RNVC: 9

24 Jul 1991

5975-14-402-1076
Cable Marker Sleeve

144021076
401585: RNCC: 3 | RNVC: 2
BGE401585: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-356-9242
Cable Marker Sleeve

143569242
03600105015I: RNCC: 3 | RNVC: 2
360105REPI: RNCC: 5 | RNVC: 2
V27REPI: RNCC: 5 | RNVC: 2
3597470036921: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-444-0866
Cable Hanger

144440866
E0608-01: RNCC: 1 | RNVC: 2
E0608-01: RNCC: 3 | RNVC: 2
ASNE0608-01: RNCC: 5 | RNVC: 2
N7788261251: RNCC: 5 | RNVC: 9

18 Dec 1990

5975-14-415-4590
Junction Box

144154590
70313: RNCC: 3 | RNVC: 2

18 May 1987

5975-14-263-2357
Stuffing Tube

142632357
823D66PPV4: RNCC: 2 | RNVC: 2

1 Jan 1970

5975-14-356-9298
Cable Marker Sleeve

143569298
036002070072: RNCC: 3 | RNVC: 2
360207REP2: RNCC: 5 | RNVC: 2
360106REP2: RNCC: 5 | RNVC: 2
V37R0UGEREP2: RNCC: 5 | RNVC: 2
3597470040904: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-543-1993
Nonmetallic Raceway

145431993
301 21: RNCC: 3 | RNVC: 2
30121: RNCC: 5 | RNVC: 2
AA001589: RNCC: 6 | RNVC: 9

31 Aug 2004

5975-14-504-2966
Cable Marker Sleeve

145042966
3698019M2: RNCC: 3 | RNVC: 2

11 Feb 1998

5975-14-317-3413
Cable Marker Sleeve

143173413
0084052580: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-370-3701
Push Button

143703701
16911117: RNCC: 3 | RNVC: 2
16911117: RNCC: 5 | RNVC: 9

18 May 1981

5975-14-383-0037
Nonmetallic Raceway

143830037
4770202580: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-33-201-4828
Junction Box Cover

332014828
MAM-HE-09-08-02: RNCC: 3 | RNVC: 2

7 Aug 2002

5975-14-458-7417
Cable Hanger

144587417
CLB43-13-707: RNCC: 3 | RNVC: 2

3 Nov 1992

5975-14-521-0232
Cable Marker Sleeve

145210232
19S970: RNCC: 3 | RNVC: 2

29 Jun 2000

5975-14-350-1431
Stuffing Tube

143501431
5975CABVL1: RNCC: 2 | RNVC: 2
539100: RNCC: 3 | RNVC: 2
53910: RNCC: 5 | RNVC: 2
A003058: RNCC: 5 | RNVC: 2
5975CA-BVL1: RNCC: 5 | RNVC: 2

14 Jun 1978

5975-14-383-0030
Nonmetallic Raceway

143830030
4770202490: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-472-6843
Nonmetallic Raceway

144726843
030008: RNCC: 3 | RNVC: 2
30008: RNCC: 5 | RNVC: 2
161-3039: RNCC: 5 | RNVC: 2
3245060300081: RNCC: 5 | RNVC: 2
5226141: RNCC: 5 | RNVC: 9
LG30008: RNCC: 5 | RNVC: 9

9 Nov 1994

5975-14-499-4431
Cable Marker Sleeve

144994431
5600023-060330-000-0-11: RNCC: 3 | RNVC: 2
5600023-060330.000.0-11: RNCC: 5 | RNVC: 2
F300 0T 022 0969: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-393-5279
Cable Marker Sleeve

143935279
HOI30-4RO-C: RNCC: 3 | RNVC: 2
H0I30C: RNCC: 5 | RNVC: 2

7 Apr 1984

5975-14-469-9647
Cable Marker Sleeve

144699647
213834-01: RNCC: 3 | RNVC: 2

18 May 1994

5975-15-068-1419
Cable Marker Sleeve

150681419
F492A1B-1-04: RNCC: 3 | RNVC: 2

19 Feb 1986

5975-14-550-1332
Guide Rail

145501332
75500-2: RNCC: 3 | RNVC: 2

1 Jun 2006

5975-14-433-5049
Access Cover

144335049
320-126-601-0: RNCC: 3 | RNVC: 2

2 Aug 1989

5975-14-339-4397
Cable Marker Sleeve

143394397
620-844-145-0: RNCC: 3 | RNVC: 2
620-844-145-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-345-2631
Junction Box

143452631
BJ1844-0101: RNCC: 3 | RNVC: 2
BJ-1844-01-01: RNCC: 5 | RNVC: 2
BJ1844-01-01: RNCC: 5 | RNVC: 2

5 Oct 1977

5975-15-068-1426
Cable Marker Sleeve

150681426
F492A3-5-04: RNCC: 3 | RNVC: 2

31 Mar 1986

5975-14-384-3611
Push Button

143843611
BMC1-1-008N: RNCC: 3 | RNVC: 9

4 May 1983

5975-14-384-0329
Junction Box

143840329
NO PRIMARY REF14-384-0329: RNCC: 3 | RNVC: 2
92E0659: RNCC: 5 | RNVC: 2
XAGA059: RNCC: 5 | RNVC: 9

4 May 1983

5975-14-463-9640
Cable Marker Sleeve

144639640
620-867-451-0: RNCC: 3 | RNVC: 2

7 Jul 1993

5975-14-549-2135
Cable Collar

145492135
365A92-1144-30: RNCC: 3 | RNVC: 2

9 Mar 2006

5975-14-476-1395
Cable Marker Sleeve

144761395
HOI50-RO-I: RNCC: 3 | RNVC: 2
HOI50-I-ROSE: RNCC: 5 | RNVC: 2
HOI50-I: RNCC: 5 | RNVC: 2

24 May 1995

5975-14-343-6797
Cable Marker Sleeve

143436797
ST400S58P205-038: RNCC: 3 | RNVC: 2

13 Jul 1977

5975-14-438-4847
Access Cover

144384847
332A61-2306-00: RNCC: 3 | RNVC: 2

21 Mar 1990

5975-14-550-6635
Junction Box

145506635
140-059XMS-001: RNCC: 3 | RNVC: 9

6 Jul 2006

5975-14-524-6799
Junction Box

145246799
1DP52-A1P52: RNCC: 3 | RNVC: 2
23RNSW400000027PL2/.PAGE2: RNCC: 3 | RNVC: 2
SYB2983: RNCC: 5 | RNVC: 2

4 Apr 2001

5975-27-028-6401
Cable Collar

270286401
3.HIBM-I-072: RNCC: 2 | RNVC: 1

25 Jan 2006

5975-14-346-2144
Push Button

143462144
5702-1-232: RNCC: 3 | RNVC: 2

12 Dec 1977

5975-14-383-0541
Cable Marker Sleeve

143830541
16986773: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-14-339-4427
Cable Marker Sleeve

143394427
SLP15-10J0R5NR: RNCC: 3 | RNVC: 2
620-849-005-0: RNCC: 5 | RNVC: 2
620-849-005-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-439-3777
Cable Marker Sleeve

144393777
SLP10-8J0: RNCC: 3 | RNVC: 2
A1231380: RNCC: 5 | RNVC: 2
2583331540: RNCC: 5 | RNVC: 9

25 Apr 1990

5975-14-528-1507
Cable Collar

145281507
4372-0076: RNCC: 3 | RNVC: 2

4 Jan 2002

5975-14-475-3194
Cable Marker Sleeve

144753194
HT150-35JORW043712: RNCC: 3 | RNVC: 2
HT150-35JOW043712: RNCC: 5 | RNVC: 2

29 Mar 1995

5975-14-509-8112
Metallic Raceway

145098112
1600-100-263-01: RNCC: 3 | RNVC: 2
1560AA0012165: RNCC: 6 | RNVC: 9

4 Nov 1998

5975-14-270-8098
Cable Marker Sleeve

142708098
450929-1: RNCC: 3 | RNVC: 2

1 Jan 1970

5975-15-158-0259
Cable Marker Sleeve

151580259
47915R114200: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-426-3177
Metallic Raceway

144263177
23136932-3: RNCC: 3 | RNVC: 2

23 Aug 1988

5975-14-486-5899
Interconnecting Box

144865899
IF217-300: RNCC: 3 | RNVC: 9

26 Mar 1997

5975-14-513-9208
Cable Marker Sleeve

145139208
0702-004A659: RNCC: 3 | RNVC: 2

19 Apr 1999

5975-27-046-3224
Junction Box Cover

270463224
450-15254: RNCC: 2 | RNVC: 1

29 Jul 2009

5975-14-524-0505
Ground Rod

145240505
ACA05: RNCC: 3 | RNVC: 2

22 Feb 2001

5975-14-317-0518
Rigid Metal Conduit

143170518
160-79222-05A: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-545-9092
Cable Marker Sleeve

145459092
03740150004R: RNCC: 3 | RNVC: 2
03740150004R: RNCC: 5 | RNVC: 2
6070-GT-0000044: RNCC: 5 | RNVC: 9

26 May 2005

5975-27-021-6927
Raceway Elbow

270216927
740 40: RNCC: 2 | RNVC: 1
740 40: RNCC: 5 | RNVC: 2
74040: RNCC: 5 | RNVC: 9
740 40: RNCC: 5 | RNVC: 9

16 Feb 2004

5975-14-434-4986
Stuffing Tube Plug

144344986
2339-242-60: RNCC: 3 | RNVC: 2

20 Sep 1989

5975-14-483-4498
Stuffing Tube

144834498
5010043661: RNCC: 3 | RNVC: 2

12 Sep 1996

5975-14-356-9339
Cable Marker Sleeve

143569339
036002080087: RNCC: 3 | RNVC: 2
360107REP7: RNCC: 5 | RNVC: 2
3597470041017: RNCC: 5 | RNVC: 2
360208REP7: RNCC: 5 | RNVC: 2
V40VI0LETREP7: RNCC: 5 | RNVC: 2

15 May 1979

5975-15-067-1128
Cable Collar

150671128
3-4POLL-ALL: RNCC: 2 | RNVC: 2

1 Apr 1998

5975-14-356-9176
Cable Marker Sleeve

143569176
03600103015N: RNCC: 3 | RNVC: 2
3597470036105: RNCC: 5 | RNVC: 2
360103REPN: RNCC: 5 | RNVC: 2
V16REPN: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-404-7255
Cable Marker Sleeve

144047255
20781793: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-420-0541
Cable Marker Sleeve

144200541
BJM07309: RNCC: 3 | RNVC: 2

18 Nov 1987

5975-14-238-2725
Cable Marker Sleeve

142382725
03520003004R: RNCC: 3 | RNVC: 2
HELAVIATWIN2REPR: RNCC: 5 | RNVC: 2
352003REPR: RNCC: 5 | RNVC: 2

1 Jan 1967

5975-27-032-4762
Nonmetallic Raceway

270324762
5975-00111-00081: RNCC: 2 | RNVC: 1

19 Jul 2006

5975-14-392-0784
Cable Marker Sleeve

143920784
320-047-701-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5975-14-527-1193
Interconnecting Box

145271193
J06040-05-8000: RNCC: 3 | RNVC: 2

3 Oct 2001

5975-14-339-4473
Cable Marker Sleeve

143394473
620-849-065-0: RNCC: 3 | RNVC: 2
620-849-065-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-27-059-2878
Stuffing Tube

270592878
CM012018-22: RNCC: 2 | RNVC: 1

8 Jul 2013

5975-14-420-7512
Cable Marker Sleeve

144207512
ST400S58P201-265: RNCC: 3 | RNVC: 2
1-265: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-206-3204
Guy

142063204
1220: RNCC: 3 | RNVC: 2
HB-41A: RNCC: 6 | RNVC: 9

1 Jan 1964

5975-14-461-0408
Metallic Raceway

144610408
SR55TYPE1-2275X500: RNCC: 3 | RNVC: 2
RAB0503: RNCC: 5 | RNVC: 2
SR55TYPE1-2275X500: RNCC: 5 | RNVC: 2

19 Feb 1993

5975-14-383-9505
Cable Marker Sleeve

143839505
78-15CXZ5S30LAB153JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ5S30JLAB153: RNCC: 5 | RNVC: 2
78-15CXZ5S30LAB153J: RNCC: 5 | RNVC: 2

4 May 1983

5975-15-068-1178
Cable Hanger

150681178
2056/8/12: RNCC: 3 | RNVC: 2

4 Sep 1985

5975-27-021-0389
Metallic Raceway

270210389
5975-00111-00045: RNCC: 2 | RNVC: 1
300MM KABLO KANALI T DONUS: RNCC: 5 | RNVC: 9

15 Dec 2003

5975-14-297-4196
Fanning Strip

142974196
NO PRIMARY REF14-297-4196: RNCC: 3 | RNVC: 2
RESARMEM6-2P5: RNCC: 5 | RNVC: 9

1 Jan 1973

5975-14-310-4925
Indicator Panel

143104925
A10-63-227-52-0: RNCC: 3 | RNVC: 2
A10-63-227-52-0: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-523-2118
Cable Marker Sleeve

145232118
01PR0TMS1W3-8: RNCC: 1 | RNVC: 2
TMS3-8-47MMU9: RNCC: 3 | RNVC: 2
HS095WE1DSU: RNCC: 5 | RNVC: 2
TMS3-8-47MMU9: RNCC: 5 | RNVC: 9
TMSSCE2X3-8-9: RNCC: 5 | RNVC: 9

10 Jan 2001

5975-14-479-1537
Cable Marker Sleeve

144791537
035200150047: RNCC: 3 | RNVC: 2
HELAVIATWIN4SYMB7: RNCC: 5 | RNVC: 2
352015REP7: RNCC: 5 | RNVC: 2
352-015-7: RNCC: 5 | RNVC: 2

18 Dec 1995

5975-14-458-7946
Cable Marker Sleeve

144587946
HT75-15JOR0A9: RNCC: 3 | RNVC: 2

4 Nov 1992

5975-14-537-0777
Guide Rail

145370777
E0597P2-102-4: RNCC: 1 | RNVC: 2
001751 102 00: RNCC: 3 | RNVC: 2
001751-102-00: RNCC: 5 | RNVC: 2

24 Sep 2003

5975-14-512-2326
Metallic Raceway

145122326
77069826: RNCC: 3 | RNVC: 2

8 Feb 1999

5975-14-541-5689
Metallic Raceway

145415689
21005: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-317-0619
Cable Marker Sleeve

143170619
NO PRIMARY REF14-317-0619: RNCC: 3 | RNVC: 2
9560110380: RNCC: 5 | RNVC: 2
35319-2: RNCC: 5 | RNVC: 9

1 Jan 1975

5975-14-415-7241
Cable Marker Sleeve

144157241
SLP20-10J0RXNR: RNCC: 3 | RNVC: 2
620-867-049-0: RNCC: 5 | RNVC: 2

18 May 1987

5975-14-515-0585
Cable Marker Sleeve

145150585
602-06-0: RNCC: 3 | RNVC: 2
HT30-5NR: RNCC: 3 | RNVC: 2
HT30-5-0: RNCC: 5 | RNVC: 2

30 Jun 1999

5975-14-329-5843
Stuffing Tube

143295843
1-8400-1462: RNCC: 3 | RNVC: 2
BAZ7879: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-371-3227
Cable Marker Sleeve

143713227
362105-01REP0: RNCC: 3 | RNVC: 2
V27-01REP0: RNCC: 5 | RNVC: 2
BBZ2202: RNCC: 5 | RNVC: 2

5 Aug 1981

5975-15-040-4367
Cable Collar

150404367
7-7499-200-27114-2: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-454-1695
Stuffing Tube

144541695
NO PRIMARY REF14-454-1695: RNCC: 3 | RNVC: 2
F7-002-126: RNCC: 5 | RNVC: 2

24 Mar 1992

5975-14-473-6963
Stuffing Tube

144736963
08000013: RNCC: 3 | RNVC: 2
08000013: RNCC: 3 | RNVC: 2
85-695-3689: RNCC: 6 | RNVC: 9

4 Jan 1995

5975-14-476-1408
Cable Marker Sleeve

144761408
HOI50-RO-T: RNCC: 3 | RNVC: 2
HOI50-4RO-T: RNCC: 5 | RNVC: 2
0617176: RNCC: 5 | RNVC: 2
HOI50-T: RNCC: 5 | RNVC: 2
HOI50-T-ROSE: RNCC: 5 | RNVC: 2

24 May 1995

5975-14-420-7540
Cable Marker Sleeve

144207540
ST400S58P202-107: RNCC: 3 | RNVC: 2
2-107: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-386-4172
Stuffing Tube

143864172
721-10001-3: RNCC: 3 | RNVC: 2
721-10001-3: RNCC: 3 | RNVC: 9

24 Aug 1983

5975-14-420-0719
Conduit Outlet

144200719
NO PRIMARY REF14-420-0719: RNCC: 3 | RNVC: 2
89165970: RNCC: 5 | RNVC: 2
6-4D3-2-83: RNCC: 5 | RNVC: 9

18 Nov 1987

5975-14-433-1447
Cable Marker Sleeve

144331447
ST400S58P202-246: RNCC: 3 | RNVC: 2
2-246: RNCC: 5 | RNVC: 2

11 Jul 1989

5975-14-517-7333
Cable Marker Sleeve

145177333
320-317-501-0: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-14-416-7425
Cable Marker Sleeve

144167425
HT20-25BA12-009: RNCC: 3 | RNVC: 2
2-009: RNCC: 5 | RNVC: 2

25 Jun 1987

5975-14-535-0314
Metallic Raceway

145350314
NO PRIMARY REF14-535-0314: RNCC: 3 | RNVC: 2
0126609: RNCC: 5 | RNVC: 9
SC086604: RNCC: 6 | RNVC: 9

30 Apr 2003

5975-14-444-4948
Fanning Strip

144444948
011823327: RNCC: 3 | RNVC: 9
118233-27: RNCC: 5 | RNVC: 2
11823327: RNCC: 5 | RNVC: 2
91594821: RNCC: 5 | RNVC: 2
424-888: RNCC: 5 | RNVC: 2

14 Jan 1991

5975-14-442-6770
Cable Marker Sleeve

144426770
620-867-065-0: RNCC: 3 | RNVC: 2

24 Oct 1990

5975-14-483-6739
Interior Cable Rack

144836739
LF40040: RNCC: 3 | RNVC: 2

27 Sep 1996

5975-14-438-1437
Ground Rod

144381437
39037857: RNCC: 3 | RNVC: 2

7 Mar 1990

5975-14-462-7917
Cable Marker Sleeve

144627917
TMS-3/16NR13U9: RNCC: 3 | RNVC: 9
TMS3-16NR13U9: RNCC: 5 | RNVC: 9

30 Apr 1993

5975-14-476-1401
Cable Marker Sleeve

144761401
HOI50-RO-P: RNCC: 3 | RNVC: 2
HOI50-4RO-P: RNCC: 3 | RNVC: 2
HOI50-P: RNCC: 5 | RNVC: 2
HOI50-P-ROSE: RNCC: 5 | RNVC: 2
0617177: RNCC: 5 | RNVC: 2

24 May 1995

5975-15-009-0035
Blank Panel

150090035
132-0214/06: RNCC: 3 | RNVC: 2

29 Apr 1999

5975-14-302-5557
Junction Box Cover

143025557
330A61-1402-01: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-299-0900
Metallic Raceway

142990900
121E63-343-20-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-33-202-8988
Blank Panel

332028988
AED-C-2002-01-008: RNCC: 3 | RNVC: 2

26 Nov 2003

5975-14-384-3624
Push Button

143843624
BMC1-1-021N: RNCC: 3 | RNVC: 9

4 May 1983

5975-14-352-3343
Cable Marker Sleeve

143523343
353043-01REPD: RNCC: 3 | RNVC: 2

16 Oct 1978

5975-14-289-7352
Interior Cable Rack

142897352
48-631-06-02: RNCC: 3 | RNVC: 2

1 Jan 1972

5975-14-356-9165
Cable Marker Sleeve

143569165
03600103015C: RNCC: 3 | RNVC: 2
3597470035955: RNCC: 5 | RNVC: 2
360103REPC: RNCC: 5 | RNVC: 2
V16REPC: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-542-5286
Cable Marker Sleeve

145425286
2594-229: RNCC: 3 | RNVC: 2

21 Jul 2004

5975-14-380-2996
Cable Marker Sleeve

143802996
D51900-30: RNCC: 3 | RNVC: 2
D51900-30: RNCC: 5 | RNVC: 2

8 Nov 1982

5975-14-324-0073
Push Button

143240073
APG6010A83: RNCC: 3 | RNVC: 2
85-681-6300: RNCC: 6 | RNVC: 9

1 Jan 1975

5975-14-357-5750
Cable Collar

143575750
15160671: RNCC: 3 | RNVC: 2
15160671: RNCC: 5 | RNVC: 2

7 Jun 1979

5975-14-429-6424
Stuffing Tube

144296424
12-2144-21: RNCC: 3 | RNVC: 2

7 Feb 1989

5975-14-465-6645
Cable Marker Sleeve

144656645
D51900-2: RNCC: 3 | RNVC: 2

6 Oct 1993

5975-14-540-9678
Interior Cable Rack

145409678
MA1555F01: RNCC: 3 | RNVC: 2

5 May 2004

5975-14-389-1524
Cable Marker Sleeve

143891524
P075-3: RNCC: 3 | RNVC: 2

29 Nov 1983

5975-14-554-5983
Cable Marker Sleeve

145545983
0084302130: RNCC: 3 | RNVC: 2

24 Jul 2007

5975-14-537-5663
Cable Marker Sleeve

145375663
735220-2: RNCC: 3 | RNVC: 2

5 Nov 2003

5975-14-413-9747
Interior Cable Rack

144139747
ST406M52P139: RNCC: 3 | RNVC: 2

22 Jan 1987

5975-14-472-2023
Cable Hanger

144722023
DTV16655: RNCC: 3 | RNVC: 2
20022248: RNCC: 5 | RNVC: 2
DTV6655: RNCC: 5 | RNVC: 9
DTV16655: RNCC: 5 | RNVC: 9

12 Oct 1994

5975-14-500-3437
Cable Marker Sleeve

145003437
6-140441-0: RNCC: 3 | RNVC: 2
F300 0T 024 3526: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-444-6845
Cable Marker Sleeve

144446845
1-009: RNCC: 3 | RNVC: 2

16 Jan 1991

5975-14-401-0748
Cable Marker Sleeve

144010748
P15C: RNCC: 3 | RNVC: 2
12450839-1: RNCC: 5 | RNVC: 2

29 May 1985

5975-14-483-4214
Metallic Raceway

144834214
50004325: RNCC: 3 | RNVC: 2

12 Sep 1996

5975-14-270-9109
Cable Marker Sleeve

142709109
204337-1381A: RNCC: 3 | RNVC: 2
7815CXZ11S30KD1381AJ: RNCC: 5 | RNVC: 9

1 Jan 1970

5975-14-442-6766
Cable Marker Sleeve

144426766
620-867-059-0: RNCC: 3 | RNVC: 2

24 Oct 1990

5975-15-181-2650
Blank Panel

151812650
AAK-1056/03: RNCC: 3 | RNVC: 2
(241)A0069AAK-1056/03: RNCC: 5 | RNVC: 2

20 Nov 2008

5975-14-445-0432
Cable Marker Sleeve

144450432
5-119: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-445-0444
Cable Marker Sleeve

144450444
6-021: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-444-6869
Cable Marker Sleeve

144446869
1-046: RNCC: 3 | RNVC: 2

16 Jan 1991

5975-14-390-2598
Junction Box

143902598
22019760-6: RNCC: 3 | RNVC: 2

26 Jan 1984

5975-14-445-6307
Cable Marker Sleeve

144456307
H090-6JO1: RNCC: 3 | RNVC: 2
H090-6J01: RNCC: 5 | RNVC: 2
5045026: RNCC: 5 | RNVC: 9

20 Feb 1991

5975-15-163-1053
Blank Panel

151631053
3AN43031AA**: RNCC: 3 | RNVC: 2

1 Jul 2002

5975-14-386-7064
Guy

143867064
779158-5: RNCC: 3 | RNVC: 2
16997147: RNCC: 5 | RNVC: 2

24 Aug 1983

5975-15-154-6964
Cable Collar

151546964
UNI 3866-29X23X1.5-O: RNCC: 2 | RNVC: 3

3 Aug 2001

5975-14-467-6767
Stuffing Tube

144676767
1391825: RNCC: 3 | RNVC: 2
C26E/PE150: RNCC: 5 | RNVC: 2

21 Jan 1994

5975-14-418-0849
Interior Cable Rack

144180849
004738990J: RNCC: 3 | RNVC: 2

6 Aug 1987

5975-14-512-1104
Raceway Elbow

145121104
L2712RAL9001: RNCC: 3 | RNVC: 2
L2712RAL9001: RNCC: 5 | RNVC: 2
L2712BLANC: RNCC: 5 | RNVC: 2

4 Feb 1999

5975-14-382-4425
Nonmetallic Raceway

143824425
4770202360: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-445-0476
Cable Marker Sleeve

144450476
7-028: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-470-5430
Cable Hanger

144705430
EA5M701-28-07: RNCC: 3 | RNVC: 2

22 Jun 1994

5975-27-054-1206
Stuffing Tube

270541206
25X1.5: RNCC: 3 | RNVC: 2

27 Jul 2011

5975-14-440-8643
Cable Marker Sleeve

144408643
03620050001T: RNCC: 3 | RNVC: 2
3597470048276: RNCC: 5 | RNVC: 2
362050-01REPT: RNCC: 5 | RNVC: 2
362050REPT: RNCC: 5 | RNVC: 2
M65BLANCREPT: RNCC: 5 | RNVC: 2

31 Jul 1990

5975-15-100-6391
Blank Panel

151006391
141-2934/01: RNCC: 3 | RNVC: 2

1 Jan 1994

5975-27-048-7753
Guide Rail

270487753
MP002520: RNCC: 2 | RNVC: 1

26 Feb 2010

5975-14-305-3440
Push Button

143053440
1106504-7GBG: RNCC: 3 | RNVC: 2
B0UT0N10N0IRGRAVE7: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-534-0446
Junction Box

145340446
SIPP214622A: RNCC: 3 | RNVC: 2

11 Mar 2003

5975-14-460-6962
Interior Cable Rack

144606962
5171600400: RNCC: 3 | RNVC: 2

4 Feb 1993

5975-14-359-0981
Access Cover

143590981
A11A612320310A1: RNCC: 3 | RNVC: 2

7 Sep 1979

5975-14-337-5044
Junction Box Cover

143375044
16751: RNCC: 3 | RNVC: 2
16751A: RNCC: 3 | RNVC: 2
16751: RNCC: 5 | RNVC: 9

7 Oct 1976

5975-14-520-3268
Nonmetallic Raceway

145203268
RAYRIMNUMER07: RNCC: 3 | RNVC: 2
RAYRIMNUMER07: RNCC: 5 | RNVC: 9

17 May 2000

5975-33-200-4113
Cable Marker Sleeve

332004113
Q 314 196 516: RNCC: 3 | RNVC: 2

22 Jan 2002

5975-14-469-7908
Interconnecting Box

144697908
45-0441: RNCC: 3 | RNVC: 2

10 May 1994

5975-15-119-0823
Cable Collar

151190823
70928304: RNCC: 3 | RNVC: 2

4 Jul 1994

5975-14-362-6086
Cable Marker Sleeve

143626086
360110REPJ: RNCC: 3 | RNVC: 2
HOI85-4RO-J: RNCC: 3 | RNVC: 2
HOI85J: RNCC: 5 | RNVC: 2
V65REPJ: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-363-6685
Interior Cable Rack

143636685
KD400: RNCC: 3 | RNVC: 2

6 Jul 1980

5975-14-446-6493
Nonmetallic Raceway

144466493
365A61-3586-0401: RNCC: 3 | RNVC: 2

9 Apr 1991

5975-14-547-6627
Junction Box

145476627
04435: RNCC: 3 | RNVC: 2
04435: RNCC: 5 | RNVC: 2

24 Oct 2005

5975-14-402-4087
Cable Marker Sleeve

144024087
01PR0TMS2W3-8: RNCC: 1 | RNVC: 2
TMS3-8NR11U9: RNCC: 3 | RNVC: 2
HS095WE2DSU: RNCC: 5 | RNVC: 2
TMSSCE2X3-8S1-9: RNCC: 5 | RNVC: 9
TMS3-8NR11U9: RNCC: 5 | RNVC: 9

3 Jul 1985

5975-14-526-8315
Interconnecting Box

145268315
5010492304: RNCC: 3 | RNVC: 2

7 Sep 2001

5975-14-485-4577
Blank Panel

144854577
T2248AA16: RNCC: 3 | RNVC: 2
T2248AA16: RNCC: 5 | RNVC: 9

23 Jan 1997

5975-27-017-3061
Junction Box

270173061
B9925921: RNCC: 2 | RNVC: 1

12 Jun 2003

5975-27-041-4511
Junction Box

270414511
ANTIGRON: RNCC: 2 | RNVC: 1
RGB 05-580: RNCC: 5 | RNVC: 9

26 May 2008

5975-27-039-1394
Junction Box

270391394
402020-02: RNCC: 5 | RNVC: 9

15 Nov 2007

5975-27-051-7270
Junction Box

270517270
BUAT 6 YOLLU ETANJ: RNCC: 2 | RNVC: 1

24 Nov 2010

5975-27-034-4773
Junction Box

270344773
4YOLLU: RNCC: 2 | RNVC: 1

11 Jan 2007

5975-27-039-1418
Junction Box

270391418
45023: RNCC: 5 | RNVC: 9

15 Nov 2007

5975-27-055-3615
Junction Box

270553615
7014 3 046-11: RNCC: 5 | RNVC: 9

1 Dec 2011

5975-14-284-6589
Cable Marker Sleeve

142846589
9132499: RNCC: 3 | RNVC: 2
9132499: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-489-1460
Junction Box

144891460
51047: RNCC: 3 | RNVC: 2

27 Jun 1997

5975-14-254-1094
Cable Marker Sleeve

142541094
352001REPA: RNCC: 3 | RNVC: 2
HELAVIATWIN0REPA: RNCC: 5 | RNVC: 2
99008735: RNCC: 5 | RNVC: 2
99008735: RNCC: 5 | RNVC: 9
99008735: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-33-211-0099
Ground Rod

332110099
27427008: RNCC: 3 | RNVC: 2

10 May 2013

5975-14-449-0236
Junction Box

144490236
20324523: RNCC: 3 | RNVC: 2
20324523: RNCC: 5 | RNVC: 9

24 Jul 1991

5975-14-528-5294
Interconnecting Box

145285294
4527542A: RNCC: 3 | RNVC: 2

30 Jan 2002

5975-14-448-9512
Interconnecting Box

144489512
008060222P: RNCC: 3 | RNVC: 2

24 Jul 1991

5975-14-537-8169
Interconnecting Box

145378169
294SP217: RNCC: 3 | RNVC: 2

27 Nov 2003

5975-14-504-9261
Conduit Outlet

145049261
BOI-Q021461A00: RNCC: 3 | RNVC: 2

11 Mar 1998

5975-14-366-7841
Junction Box

143667841
944459: RNCC: 3 | RNVC: 2
944459: RNCC: 5 | RNVC: 9

20 Nov 1980

5975-14-421-2386
Interior Cable Rack

144212386
000051: RNCC: 3 | RNVC: 2
101067: RNCC: 3 | RNVC: 9
CF30/300: RNCC: 5 | RNVC: 2

11 Jan 1988

5975-14-404-8452
Cable Marker Sleeve

144048452
29747554: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-457-2738
Metallic Raceway

144572738
38020034: RNCC: 3 | RNVC: 2
38020034: RNCC: 5 | RNVC: 9

20 Aug 1992

5975-14-254-1194
Cable Marker Sleeve

142541194
352005REPW: RNCC: 3 | RNVC: 2
HELAVIATWIN4REPW: RNCC: 5 | RNVC: 2

1 Jan 1969

5975-14-541-5691
Metallic Raceway

145415691
21008: RNCC: 3 | RNVC: 2

10 Jun 2004

5975-14-474-9598
Cable Marker Sleeve

144749598
11013: RNCC: 3 | RNVC: 2

15 Mar 1995

5975-14-542-9762
Metallic Raceway

145429762
T257A4001802: RNCC: 3 | RNVC: 2

18 Aug 2004

5975-14-454-8433
Junction Box

144548433
ST406M52P15E11BIS: RNCC: 3 | RNVC: 2

24 Apr 1992

5975-14-383-0544
Cable Marker Sleeve

143830544
16899401: RNCC: 3 | RNVC: 2

17 Mar 1983

5975-33-002-3843
Chassis Base

330023843
D85001M01: RNCC: 3 | RNVC: 2

1 Feb 1995

5975-14-422-4537
Junction Box

144224537
190638: RNCC: 3 | RNVC: 2

3 Mar 1988

5975-14-544-5392
Nonmetallic Raceway

145445392
030311: RNCC: 3 | RNVC: 2

9 Feb 2005

5975-14-254-1124
Cable Marker Sleeve

142541124
352002REPS: RNCC: 3 | RNVC: 2
99042443: RNCC: 5 | RNVC: 2
HELAVIATWIN1REPS: RNCC: 5 | RNVC: 2
99042443: RNCC: 5 | RNVC: 9
99042443: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-442-9111
Conduit Outlet

144429111
20213157: RNCC: 3 | RNVC: 2
20213157: RNCC: 5 | RNVC: 9

7 Nov 1990

5975-14-481-8792
Conduit Outlet

144818792
45824423: RNCC: 3 | RNVC: 2

6 Jun 1996

5975-33-107-4645
Interconnecting Box

331074645
W290683215000: RNCC: 3 | RNVC: 2

15 Nov 1999

5975-14-530-0533
Switch Box Case

145300533
S245A20A1001: RNCC: 1 | RNVC: 2
621GA01Y02: RNCC: 3 | RNVC: 2
621GA01Y00: RNCC: 5 | RNVC: 9

30 Apr 2002

5975-14-483-6684
Guide Rail

144836684
38427499: RNCC: 3 | RNVC: 2
38427499: RNCC: 5 | RNVC: 9

27 Sep 1996

5975-14-466-1318
Ground Rod

144661318
45399222: RNCC: 3 | RNVC: 2
45399222: RNCC: 3 | RNVC: 9

27 Oct 1993

5975-14-325-3716
Stuffing Tube

143253716
511EL0604REP2: RNCC: 3 | RNVC: 2
511EL604REP2: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-554-9857
Raceway Cover

145549857
646040: RNCC: 3 | RNVC: 2

14 Sep 2007

5975-14-276-4006
Junction Box

142764006
27408: RNCC: 3 | RNVC: 2

1 Jan 1971

5975-14-397-1271
Crossarm Brace

143971271
20321338: RNCC: 3 | RNVC: 2
20321338: RNCC: 5 | RNVC: 9

1 Dec 1984

5975-15-158-0183
Cable Marker Sleeve

151580183
47915A126350: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-404-1838
Push Button

144041838
16798525: RNCC: 3 | RNVC: 2
16798525: RNCC: 3 | RNVC: 9

11 Sep 1985

5975-14-550-1855
Blank Panel

145501855
7151.035: RNCC: 3 | RNVC: 2
61773707AA: RNCC: 5 | RNVC: 2
AA018525: RNCC: 6 | RNVC: 9

7 Jun 2006

5975-14-470-9079
Cable Marker Sleeve

144709079
03520012004I: RNCC: 3 | RNVC: 2
352012REPI: RNCC: 5 | RNVC: 2
3597470260647: RNCC: 5 | RNVC: 2
782112007543: RNCC: 5 | RNVC: 2
782112007543: RNCC: 5 | RNVC: 9

13 Jul 1994

5975-14-434-8652
Conduit Outlet

144348652
8402M861: RNCC: 3 | RNVC: 2
488402M861: RNCC: 5 | RNVC: 2

4 Oct 1989

5975-14-402-1084
Cable Marker Sleeve

144021084
401595: RNCC: 3 | RNVC: 2
BGE401595: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-15-204-3719
Junction Box

152043719
D8211214: RNCC: 3 | RNVC: 2

25 Oct 2011

5975-14-425-4692
Cable Marker Sleeve

144254692
20670057: RNCC: 3 | RNVC: 2
20670057: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-14-402-1094
Cable Marker Sleeve

144021094
401605: RNCC: 3 | RNVC: 2
BGE401605: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-386-3056
Stuffing Tube

143863056
534600: RNCC: 3 | RNVC: 2

24 Aug 1983

5975-14-445-8867
Rigid Metal Conduit

144458867
39959441: RNCC: 3 | RNVC: 2
39959441: RNCC: 5 | RNVC: 9

27 Feb 1991

5975-14-356-9408
Cable Marker Sleeve

143569408
036002100044: RNCC: 3 | RNVC: 2
360109REP4: RNCC: 5 | RNVC: 2
360210REP4: RNCC: 5 | RNVC: 2
V60JAUNEREP4: RNCC: 5 | RNVC: 2
3597470041178: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-404-8412
Cable Marker Sleeve

144048412
29747514: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-420-0544
Cable Marker Sleeve

144200544
BJM07347: RNCC: 3 | RNVC: 2

18 Nov 1987

5975-27-021-0667
Guide Rail

270210667
1010FK-1911284: RNCC: 2 | RNVC: 1

15 Dec 2003

5975-14-409-3521
Junction Box

144093521
71866: RNCC: 3 | RNVC: 2

28 May 1986

5975-14-518-0373
Stuffing Tube

145180373
062480: RNCC: 3 | RNVC: 2

21 Jan 2000

5975-14-519-9951
Interconnecting Box

145199951
4623159A: RNCC: 3 | RNVC: 2
4623159A: RNCC: 3 | RNVC: 9

3 May 2000

5975-14-254-1178
Cable Marker Sleeve

142541178
352005REPE: RNCC: 3 | RNVC: 2
HELAVIATWIN4REPE: RNCC: 5 | RNVC: 2

1 Jan 1969

5975-14-467-2173
Interconnecting Box

144672173
46070294: RNCC: 3 | RNVC: 9
46070294: RNCC: 5 | RNVC: 2

21 Dec 1993

5975-14-225-4859
Junction Box

142254859
D6454: RNCC: 3 | RNVC: 2
D6454: RNCC: 5 | RNVC: 9

1 Jan 1966

5975-14-352-7349
Interior Cable Rack

143527349
611101762: RNCC: 3 | RNVC: 2

14 Nov 1978

5975-14-453-5815
Cable Marker Sleeve

144535815
BAZ11739: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-411-1226
Junction Box

144111226
249791: RNCC: 3 | RNVC: 2

6 Aug 1986

5975-14-505-7752
Interconnecting Box

145057752
30001391: RNCC: 3 | RNVC: 9

26 Mar 1998

5975-14-316-8689
Push Button

143168689
4089DET11: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-399-4981
Wire Strand Hanger

143994981
15140194: RNCC: 3 | RNVC: 2

6 Mar 1985

5975-14-513-9330
Cable Marker Sleeve

145139330
2702-391A751: RNCC: 3 | RNVC: 2

19 Apr 1999

5975-14-449-6189
Stuffing Tube

144496189
360100: RNCC: 3 | RNVC: 2

28 Aug 1991

5975-14-362-6027
Cable Marker Sleeve

143626027
03600101015C: RNCC: 3 | RNVC: 2
3597470035078: RNCC: 5 | RNVC: 2
360101REPC: RNCC: 5 | RNVC: 2
V09REPC: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-454-4650
Blank Panel

144544650
8174034: RNCC: 3 | RNVC: 2

2 Apr 1992

5975-14-343-6987
Junction Box

143436987
607SP7-02: RNCC: 3 | RNVC: 2

13 Jul 1977

5975-15-103-6824
Rigid Metal Conduit

151036824
24009512A: RNCC: 3 | RNVC: 2

26 Nov 1987

5975-14-517-9119
Interconnecting Box

145179119
CHP864MA125: RNCC: 3 | RNVC: 2

17 Jan 2000

5975-14-470-4475
Chassis Base

144704475
419154: RNCC: 3 | RNVC: 2
Z90D: RNCC: 5 | RNVC: 2
Z94D: RNCC: 5 | RNVC: 2
407030: RNCC: 5 | RNVC: 2
Z94D: RNCC: 5 | RNVC: 2

21 Jun 1994

5975-14-489-1894
Blank Panel

144891894
31139004: RNCC: 3 | RNVC: 2

2 Jul 1997

5975-14-439-7646
Junction Box

144397646
03/90BECN/EE: RNCC: 3 | RNVC: 2

22 May 1990

5975-14-443-1761
Switchboard Signal

144431761
VR2264R: RNCC: 3 | RNVC: 2

12 Nov 1990

5975-14-362-6109
Cable Marker Sleeve

143626109
03600111015G: RNCC: 3 | RNVC: 2
3597470039540: RNCC: 5 | RNVC: 2
360111REPG: RNCC: 5 | RNVC: 2
V80REPG: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-404-7288
Cable Marker Sleeve

144047288
39049276: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-530-4492
Chassis Base

145304492
PC 3828: RNCC: 3 | RNVC: 2

12 Jun 2002

5975-14-408-4545
Interior Cable Rack

144084545
B30040: RNCC: 3 | RNVC: 2

1 Apr 1986

5975-15-156-8267
Access Hole Frame

151568267
RGS F 4S/S: RNCC: 3 | RNVC: 2

7 Mar 2000

5975-14-554-5997
Cable Marker Sleeve

145545997
0084304160: RNCC: 3 | RNVC: 2

24 Jul 2007

5975-14-402-1066
Cable Marker Sleeve

144021066
401575: RNCC: 3 | RNVC: 2
BGE401575: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-456-9778
Cable Marker Sleeve

144569778
0702-191A019: RNCC: 3 | RNVC: 2
0702-191A019: RNCC: 5 | RNVC: 2

30 Jul 1992

5975-14-499-3778
Interconnecting Box

144993778
0-0142494-1: RNCC: 3 | RNVC: 2
5010058748: RNCC: 3 | RNVC: 2
F300 0T 021 8071: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-421-7568
Blank Panel

144217568
39233422: RNCC: 3 | RNVC: 2
20007: RNCC: 5 | RNVC: 1
39233422: RNCC: 5 | RNVC: 9

27 Jan 1988

5975-33-201-0898
Blank Panel

332010898
3AN 10584 0300: RNCC: 3 | RNVC: 2

29 Apr 2002

5975-14-553-4194
Metallic Raceway

145534194
T882A4002130: RNCC: 3 | RNVC: 2

2 Apr 2007

5975-14-489-1462
Junction Box

144891462
51050: RNCC: 3 | RNVC: 2
COFFRET-51050: RNCC: 3 | RNVC: 2

27 Jun 1997

5975-15-202-6506
Blank Panel

152026506
532525008: RNCC: 3 | RNVC: 2
(241)AG280532525008: RNCC: 5 | RNVC: 2

6 Jun 2007

5975-14-238-2812
Cable Marker Sleeve

142382812
03520006004Z: RNCC: 3 | RNVC: 2
HELAVIATWIN5REPZ: RNCC: 5 | RNVC: 2
352006REPZ: RNCC: 5 | RNVC: 2

1 Jan 1967

5975-27-041-8642
Raceway Elbow

270418642
333 28: RNCC: 2 | RNVC: 1

26 Jun 2008

5975-14-463-7358
Stuffing Tube

144637358
08000121: RNCC: 3 | RNVC: 2
91628604: RNCC: 5 | RNVC: 2

23 Jun 1993

5975-14-485-5411
Chassis Base

144855411
15616623: RNCC: 3 | RNVC: 2

29 Jan 1997

5975-14-426-4900
Cable Marker Sleeve

144264900
WBS3-7: RNCC: 3 | RNVC: 2

1 Sep 1988

5975-33-004-2653
Chassis Base

330042653
730096331: RNCC: 3 | RNVC: 2

12 Nov 1998

5975-14-429-2108
Ground Rod

144292108
60682: RNCC: 3 | RNVC: 2

11 Jan 1989

5975-14-439-6932
Ground Rod

144396932
16776555: RNCC: 3 | RNVC: 2
16776555: RNCC: 5 | RNVC: 9

16 May 1990

5975-14-445-4425
Cable Marker Sleeve

144454425
TRSA1012C1-7: RNCC: 3 | RNVC: 9

14 Feb 1991

5975-14-445-0341
Cable Marker Sleeve

144450341
1-086: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-287-0714
Cable Marker Sleeve

142870714
MGCM3BA10-2: RNCC: 3 | RNVC: 2
9554819020: RNCC: 5 | RNVC: 2
MGCM3BA10-2: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-466-1325
Interconnecting Box

144661325
5000288445: RNCC: 3 | RNVC: 2

27 Oct 1993

5975-14-300-3187
Fanning Strip

143003187
15136760: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-33-103-5224
Conduit Outlet

331035224
5001-C: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-14-444-6850
Cable Marker Sleeve

144446850
1-019: RNCC: 3 | RNVC: 2

16 Jan 1991

5975-14-481-4332
Ground Rod

144814332
61946: RNCC: 3 | RNVC: 2

8 May 1996

5975-14-414-8208
Switch Box Case

144148208
035-66387-0: RNCC: 3 | RNVC: 9

12 Mar 1987

5975-14-355-3104
Junction Box

143553104
611103357: RNCC: 3 | RNVC: 2

19 Mar 1979

5975-14-484-8316
Interior Cable Rack

144848316
DALLE TYPE A: RNCC: 3 | RNVC: 9

7 Dec 1996

5975-14-454-6596
Junction Box

144546596
M4ZS743D1005B: RNCC: 3 | RNVC: 2

9 Apr 1992

5975-14-542-2304
Stuffing Tube Plug

145422304
602501608: RNCC: 3 | RNVC: 2
602501608: RNCC: 5 | RNVC: 9

8 Jul 2004

5975-14-453-5760
Cable Marker Sleeve

144535760
BAZ9439: RNCC: 3 | RNVC: 2

26 Feb 1992

5975-14-537-8171
Interconnecting Box

145378171
294SP219: RNCC: 3 | RNVC: 2

27 Nov 2003

5975-14-504-1938
Cable Marker Sleeve

145041938
1695570M2: RNCC: 3 | RNVC: 2

11 Feb 1998

5975-14-404-7333
Cable Marker Sleeve

144047333
39214597: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-33-206-3833
Raceway Elbow

332063833
73310-2: RNCC: 3 | RNVC: 2

11 Dec 2007

5975-14-402-5157
Push Button

144025157
000057000: RNCC: 3 | RNVC: 2

10 Jul 1985

5975-14-402-6127
Cable Marker Sleeve

144026127
TMSNR501HBLANC: RNCC: 3 | RNVC: 9
12451241-5: RNCC: 5 | RNVC: 2

19 Jul 1985

5975-27-029-7975
Blank Panel

270297975
1.HIBM-1I-2391: RNCC: 2 | RNVC: 1

17 May 2006

5975-14-300-3235
Fanning Strip

143003235
15138279: RNCC: 3 | RNVC: 2
15138279: RNCC: 5 | RNVC: 2

1 Jan 1973

5975-14-402-1068
Cable Marker Sleeve

144021068
401577: RNCC: 3 | RNVC: 2
BGE401577: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-445-1801
Metallic Raceway

144451801
561795: RNCC: 3 | RNVC: 2

4 Feb 1991

5975-14-404-8343
Cable Marker Sleeve

144048343
29747439: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-445-0475
Cable Marker Sleeve

144450475
7-014: RNCC: 3 | RNVC: 2

31 Jan 1991

5975-14-506-9388
Cable Marker Sleeve

145069388
27138010-6: RNCC: 3 | RNVC: 2

27 May 1998

5975-14-268-0033
Stuffing Tube

142680033
823D66BVL6: RNCC: 2 | RNVC: 2
50660: RNCC: 3 | RNVC: 2
01257277: RNCC: 5 | RNVC: 2
91326907: RNCC: 5 | RNVC: 2
01257277: RNCC: 5 | RNVC: 2
91326907: RNCC: 5 | RNVC: 2

1 Jan 1970

5975-14-456-9771
Cable Marker Sleeve

144569771
0702-191A031: RNCC: 3 | RNVC: 2
0702-191A031: RNCC: 5 | RNVC: 2

30 Jul 1992

5975-14-553-5182
Stuffing Tube

145535182
912504: RNCC: 3 | RNVC: 2
912574: RNCC: 3 | RNVC: 9
912584: RNCC: 3 | RNVC: 9

11 Apr 2007

5975-14-404-8357
Cable Marker Sleeve

144048357
29747456: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-428-8411
Interconnecting Box

144288411
20325386: RNCC: 3 | RNVC: 2
20325386: RNCC: 5 | RNVC: 9

22 Dec 1988

5975-14-523-1785
Blank Panel

145231785
4699535A: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-14-436-9060
Cable Marker Sleeve

144369060
BJM07313: RNCC: 3 | RNVC: 2

9 Jan 1990

5975-14-506-1489
Stuffing Tube

145061489
600.866: RNCC: 3 | RNVC: 2

8 Apr 1998

5975-14-555-3059
Junction Box

145553059
61933418AA: RNCC: 3 | RNVC: 2

23 Oct 2007

5975-14-444-4217
Rigid Metal Conduit

144444217
231528: RNCC: 3 | RNVC: 2

9 Jan 1991

5975-14-378-1222
Push Button

143781222
897329: RNCC: 3 | RNVC: 2
897329: RNCC: 5 | RNVC: 9

20 Jul 1982

5975-14-546-5149
Cable Hanger

145465149
81110317: RNCC: 3 | RNVC: 2

12 Jul 2005

5975-14-456-0853
Cable Marker Sleeve

144560853
73J2G: RNCC: 3 | RNVC: 2

17 Jun 1992

5975-14-524-7166
Junction Box Cover

145247166
461996: RNCC: 3 | RNVC: 2

5 Apr 2001

5975-14-418-3428
Switch Box Case

144183428
20247515: RNCC: 3 | RNVC: 2

12 Aug 1987

5975-14-535-4207
Interconnecting Box

145354207
4502001: RNCC: 3 | RNVC: 2
5010577057: RNCC: 5 | RNVC: 2

22 May 2003

5975-15-158-0258
Cable Marker Sleeve

151580258
47915R114100: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-356-9184
Cable Marker Sleeve

143569184
03600103015W: RNCC: 3 | RNVC: 2
3597470036242: RNCC: 5 | RNVC: 2
360103REPW: RNCC: 5 | RNVC: 2
V16REPW: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-517-0949
Interconnecting Box

145170949
AL1155F00: RNCC: 3 | RNVC: 2

3 Nov 1999

5975-27-059-1546
Metallic Raceway

270591546
001 005 025060 20 13: RNCC: 5 | RNVC: 9

7 Jun 2013

5975-14-331-4027
Junction Box

143314027
K446HB2X3: RNCC: 3 | RNVC: 2
K446HB2X3: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-452-8712
Stuffing Tube

144528712
Y9801288: RNCC: 3 | RNVC: 2
7552: RNCC: 5 | RNVC: 2
CPNH29L: RNCC: 5 | RNVC: 2
91607865: RNCC: 5 | RNVC: 2

22 Jan 1992

5975-14-305-9568
Junction Box

143059568
18D113: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-434-0548
Blank Panel

144340548
20035: RNCC: 3 | RNVC: 2
20035: RNCC: 5 | RNVC: 9

1 Sep 1989

5975-27-051-5925
Junction Box

270515925
5935DA0072314: RNCC: 5 | RNVC: 9

9 Nov 2010

5975-27-046-1853
Junction Box

270461853
210X280X90: RNCC: 5 | RNVC: 9

17 Jul 2009

5975-27-033-5906
Junction Box

270335906
G102: RNCC: 5 | RNVC: 9

1 Nov 2006

5975-27-052-3734
Junction Box

270523734
DA0010054: RNCC: 5 | RNVC: 9

14 Jan 2011

5975-33-202-9157
Interconnecting Box

332029157
1025-901809: RNCC: 3 | RNVC: 2

28 Nov 2003

5975-14-440-4924
Cable Marker Sleeve

144404924
20130397: RNCC: 3 | RNVC: 2
20130397: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-356-9172
Cable Marker Sleeve

143569172
03600103015J: RNCC: 3 | RNVC: 2
360103REPJ: RNCC: 5 | RNVC: 2
3597470036051: RNCC: 5 | RNVC: 2
V16REPJ: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-356-9355
Cable Marker Sleeve

143569355
03600108015N: RNCC: 3 | RNVC: 2
3597470038307: RNCC: 5 | RNVC: 2
360108REPN: RNCC: 5 | RNVC: 2
V50REPN: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-348-1423
Fanning Strip

143481423
CR1671: RNCC: 3 | RNVC: 9

29 Mar 1978

5975-14-425-4638
Cable Marker Sleeve

144254638
20130272: RNCC: 3 | RNVC: 2
20130272: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-14-508-0714
Interconnecting Box

145080714
4773102400: RNCC: 3 | RNVC: 2

26 Aug 1998

5975-14-493-4418
Cable Marker Sleeve

144934418
BGE011170: RNCC: 3 | RNVC: 2
F300 0T 013 0687: RNCC: 6 | RNVC: 9

8 Oct 1997

5975-14-422-4588
Junction Box

144224588
231406: RNCC: 3 | RNVC: 2

3 Mar 1988

5975-14-449-1437
Junction Box

144491437
BAZ12327: RNCC: 3 | RNVC: 2

31 Jul 1991

5975-33-002-3255
Blank Panel

330023255
115.12.01: RNCC: 3 | RNVC: 2

22 Aug 1994

5975-14-428-6158
Blank Panel

144286158
GC9413: RNCC: 3 | RNVC: 2

8 Dec 1988

5975-27-009-9405
Junction Box

270099405
98012565: RNCC: 2 | RNVC: 1

15 Oct 2001

5975-14-439-4849
Stuffing Tube

144394849
515600: RNCC: 3 | RNVC: 2
BVLEFS6: RNCC: 5 | RNVC: 2

9 May 1990

5975-15-058-8878
Insulator Pin

150588878
P44EA48: RNCC: 5 | RNVC: 2
P44EA48: RNCC: 5 | RNVC: 9

7 Jan 1975

5975-14-349-8477
Rigid Metal Conduit

143498477
0249847060: RNCC: 3 | RNVC: 2

14 Jun 1978

5975-14-356-9358
Cable Marker Sleeve

143569358
03600108015Q: RNCC: 3 | RNVC: 2
3597470038345: RNCC: 5 | RNVC: 2
360108REPQ: RNCC: 5 | RNVC: 2
V50REPQ: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-457-8612
Metallic Raceway

144578612
263880: RNCC: 3 | RNVC: 2
89469894: RNCC: 5 | RNVC: 2
146062: RNCC: 5 | RNVC: 2

24 Sep 1992

5975-14-545-2098
Nonmetallic Raceway

145452098
10432: RNCC: 3 | RNVC: 2
AA013078: RNCC: 6 | RNVC: 9

24 Mar 2005

5975-14-405-6607
Conduit Outlet

144056607
120090-603: RNCC: 3 | RNVC: 9

4 Dec 1985

5975-14-042-6779
Junction Box

140426779
12DMLN: RNCC: 3 | RNVC: 2

15 May 1979

5975-14-449-5813
Stuffing Tube Plug

144495813
192900: RNCC: 3 | RNVC: 2

28 Aug 1991

5975-14-355-2446
Cable Marker Sleeve

143552446
594501528: RNCC: 3 | RNVC: 2

19 Mar 1979

5975-14-362-6103
Cable Marker Sleeve

143626103
03600111015A: RNCC: 3 | RNVC: 2
V80REPA: RNCC: 5 | RNVC: 2
3597470039434: RNCC: 5 | RNVC: 2
360111REPA: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-14-306-9010
Cable Marker Sleeve

143069010
0084052260: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-382-4621
Junction Box

143824621
387835: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-14-410-1417
Push Button

144101417
22BVP1F: RNCC: 3 | RNVC: 2

4 Jun 1986

5975-15-001-2848
Stuffing Tube

150012848
DKM251808: RNCC: 3 | RNVC: 2
(241)A0461D0606168: RNCC: 5 | RNVC: 2
D0606168: RNCC: 5 | RNVC: 2

14 Jun 2013

5975-14-284-3897
Cable Marker Sleeve

142843897
352003SYMBTERRE: RNCC: 3 | RNVC: 2
HELAVIATWIN2SYMBTERRE: RNCC: 5 | RNVC: 2

1 Jan 1972

5975-33-108-1768
Cable Marker Sleeve

331081768
5975000282: RNCC: 3 | RNVC: 2

29 Jan 2001

5975-14-462-4365
Metallic Raceway

144624365
LN400 019REPB6: RNCC: 3 | RNVC: 2

20 Apr 1993

5975-14-465-0472
Cable Marker Sleeve

144650472
39457387: RNCC: 3 | RNVC: 2
39457387: RNCC: 3 | RNVC: 9

8 Sep 1993

5975-14-489-4509
Conduit Outlet

144894509
BOITE91949A00: RNCC: 3 | RNVC: 2
BOITE91949X00: RNCC: 5 | RNVC: 2

23 Jul 1997

5975-27-038-2364
Junction Box

270382364
TIP 3100: RNCC: 2 | RNVC: 1

21 Sep 2007

5975-14-416-8099
Metallic Raceway

144168099
16274747: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-547-1839
Interconnecting Box

145471839
83043: RNCC: 3 | RNVC: 2
53043: RNCC: 3 | RNVC: 9

3 Oct 2005

5975-14-471-4757
Metallic Raceway

144714757
542200: RNCC: 3 | RNVC: 2

31 Aug 1994

5975-14-425-2168
Metallic Raceway

144252168
6062669: RNCC: 3 | RNVC: 2
6062669: RNCC: 5 | RNVC: 2

24 Jun 1988

5975-14-507-1596
Cable Hanger

145071596
PLOTVID: RNCC: 3 | RNVC: 2

17 Jun 1998

5975-14-426-5818
Access Cover

144265818
412016: RNCC: 3 | RNVC: 2

8 Sep 1988

5975-14-382-6251
Cable Marker Sleeve

143826251
96080527: RNCC: 3 | RNVC: 2

17 Feb 1983

5975-27-021-4227
Junction Box

270214227
05001HB0208: RNCC: 2 | RNVC: 1
41002: RNCC: 2 | RNVC: 1
41002: RNCC: 5 | RNVC: 9

15 Dec 2003

5975-27-046-1888
Junction Box

270461888
85X84X50: RNCC: 5 | RNVC: 9

17 Jul 2009

5975-14-305-2767
Cable Marker Sleeve

143052767
9131678: RNCC: 3 | RNVC: 2
9131678: RNCC: 5 | RNVC: 9

1 Jan 1974

5975-14-471-8507
Junction Box

144718507
379470: RNCC: 3 | RNVC: 2
379470: RNCC: 5 | RNVC: 9

21 Sep 1994

5975-14-428-8397
Interconnecting Box

144288397
16630018: RNCC: 3 | RNVC: 2
16630018: RNCC: 5 | RNVC: 9

22 Dec 1988

5975-14-522-0442
Interconnecting Box

145220442
46605890: RNCC: 3 | RNVC: 2

29 Sep 2000

5975-14-356-9398
Cable Marker Sleeve

143569398
03600109015U: RNCC: 3 | RNVC: 2
360109REPU: RNCC: 5 | RNVC: 2
V60REPU: RNCC: 5 | RNVC: 2
3597470038864: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-385-0988
Interconnecting Box

143850988
M4DW2301555302: RNCC: 3 | RNVC: 2

26 Jul 1983

5975-14-473-9272
Switch Box Case

144739272
45213720: RNCC: 3 | RNVC: 2

18 Jan 1995

5975-14-358-3446
Stuffing Tube

143583446
61079: RNCC: 3 | RNVC: 2
5000495821: RNCC: 5 | RNVC: 2
5000495821: RNCC: 5 | RNVC: 9

13 Aug 1979

5975-33-161-6970
Conduit Outlet

331616970
922 20: RNCC: 3 | RNVC: 2

1 Aug 1995

5975-14-440-4982
Cable Marker Sleeve

144404982
20130386: RNCC: 3 | RNVC: 2
20130386: RNCC: 3 | RNVC: 9

16 Jul 1990

5975-14-360-5599
Cable Marker Sleeve

143605599
16892013: RNCC: 3 | RNVC: 2
16892013: RNCC: 5 | RNVC: 9

23 Nov 1979

5975-14-356-9379
Cable Marker Sleeve

143569379
03600109015B: RNCC: 3 | RNVC: 2
360109REPB: RNCC: 5 | RNVC: 2
V60REPB: RNCC: 5 | RNVC: 2
3597470038581: RNCC: 5 | RNVC: 2

15 May 1979

5975-27-019-3988
Cable Marker Sleeve

270193988
10091MN0004: RNCC: 2 | RNVC: 1

15 Nov 2003

5975-33-107-9275
Junction Box

331079275
7057.592.0003: RNCC: 3 | RNVC: 2
2510700163: RNCC: 5 | RNVC: 2

26 Sep 2000

5975-14-402-1089
Cable Marker Sleeve

144021089
401600: RNCC: 3 | RNVC: 2
BGE401600: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-477-2758
Cable Marker Sleeve

144772758
03520015004$: RNCC: 3 | RNVC: 2
HELAVIATWIN4REPSIGNEAC: RNCC: 5 | RNVC: 2
352015SYMBAC: RNCC: 5 | RNVC: 2

3 Aug 1995

5975-14-404-7222
Cable Marker Sleeve

144047222
20781445: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-543-9774
Cable Marker Sleeve

145439774
S01036502: RNCC: 3 | RNVC: 2

19 Dec 2004

5975-14-521-2095
Cable Marker Sleeve

145212095
TS142754: RNCC: 3 | RNVC: 2

12 Jul 2000

5975-14-501-6396
Stuffing Tube

145016396
95544: RNCC: 3 | RNVC: 2

5 Nov 1997

5975-14-362-6083
Cable Marker Sleeve

143626083
360110REPG: RNCC: 3 | RNVC: 2
V65REPG: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-27-056-5849
Cable Marker Sleeve

270565849
518040: RNCC: 5 | RNVC: 9

12 Apr 2012

5975-14-384-6633
Cable Marker Sleeve

143846633
96080788: RNCC: 3 | RNVC: 2

2 Jun 1983

5975-14-467-8481
Electrical Lead

144678481
29678691: RNCC: 3 | RNVC: 2

27 Jan 1994

5975-33-001-8604
Conduit Outlet

330018604
74061: RNCC: 3 | RNVC: 2

8 May 1991

5975-14-518-0390
Cable Marker Sleeve

145180390
207255: RNCC: 3 | RNVC: 2

21 Jan 2000

5975-14-481-0629
Metallic Raceway

144810629
1302115N010: RNCC: 3 | RNVC: 2

18 Apr 1996

5975-14-516-6942
Interconnecting Box

145166942
4623991A: RNCC: 3 | RNVC: 2

12 Oct 1999

5975-14-529-3941
Stuffing Tube

145293941
1209210114: RNCC: 3 | RNVC: 2

29 Mar 2002

5975-15-158-0264
Cable Marker Sleeve

151580264
47915R117210: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-316-2491
Chassis Base

143162491
106761: RNCC: 3 | RNVC: 2
106761: RNCC: 5 | RNVC: 2

1 Jan 1975

5975-14-421-0078
Switch Box Case

144210078
39233116: RNCC: 3 | RNVC: 2
39233116: RNCC: 5 | RNVC: 9

6 Jan 1988

5975-14-520-6959
Interconnecting Box

145206959
47060236: RNCC: 3 | RNVC: 2

31 May 2000

5975-14-548-1155
Rigid Metal Conduit

145481155
5010544444: RNCC: 3 | RNVC: 2

12 Dec 2005

5975-33-202-6951
Interconnecting Box

332026951
9673.590.5082: RNCC: 3 | RNVC: 2
2510903199: RNCC: 5 | RNVC: 2
2510903199: RNCC: 5 | RNVC: 2

26 Sep 2003

5975-15-001-3090
Junction Box

150013090
504382509: RNCC: 3 | RNVC: 2

17 Jun 2013

5975-27-055-3614
Junction Box

270553614
7014 3 046-12: RNCC: 5 | RNVC: 9

1 Dec 2011

5975-27-055-3617
Junction Box

270553617
7079 1 040-04: RNCC: 5 | RNVC: 9

1 Dec 2011

5975-27-048-6539
Metallic Raceway

270486539
SK250016: RNCC: 2 | RNVC: 1

18 Feb 2010

5975-15-126-4551
Cable Collar

151264551
XG221: RNCC: 3 | RNVC: 2

8 Oct 1996

5975-14-431-9309
Cable Marker Sleeve

144319309
0894497T00: RNCC: 3 | RNVC: 2

16 May 1989

5975-14-319-7187
Cable Marker Sleeve

143197187
0084050310: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-356-9312
Cable Marker Sleeve

143569312
03600107015G: RNCC: 3 | RNVC: 2
3597470037782: RNCC: 5 | RNVC: 2
360107REPG: RNCC: 5 | RNVC: 2
V40REPG: RNCC: 5 | RNVC: 2

15 May 1979

5975-14-519-9949
Interconnecting Box

145199949
4623158A: RNCC: 3 | RNVC: 2
4623158A: RNCC: 3 | RNVC: 9

3 May 2000

5975-14-383-6301
Cable Marker Sleeve

143836301
4061612880: RNCC: 3 | RNVC: 2

11 Apr 1983

5975-14-254-1144
Cable Marker Sleeve

142541144
03520003004W: RNCC: 3 | RNVC: 2
99042466: RNCC: 5 | RNVC: 2
HELAVIATWIN2REPW: RNCC: 5 | RNVC: 2
352003REPW: RNCC: 5 | RNVC: 2
99042466: RNCC: 5 | RNVC: 9
99042466: RNCC: 5 | RNVC: 9

1 Jan 1969

5975-14-531-7911
Junction Box

145317911
D69303100000: RNCC: 3 | RNVC: 2

18 Sep 2002

5975-14-439-5687
Stuffing Tube

144395687
1401-502100: RNCC: 3 | RNVC: 2

15 May 1990

5975-14-313-1839
Junction Box

143131839
17014744: RNCC: 3 | RNVC: 2
17014744: RNCC: 5 | RNVC: 9

1 Jan 1974

5975-14-550-2796
Interconnecting Box

145502796
JH1354F01: RNCC: 3 | RNVC: 2

14 Jun 2006

5975-14-322-8877
Cable Marker Sleeve

143228877
0084052440: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-470-3362
Junction Box

144703362
203519: RNCC: 3 | RNVC: 2

15 Jun 1994

5975-14-485-5454
Junction Box

144855454
20354891: RNCC: 3 | RNVC: 2

29 Jan 1997

5975-14-531-7848
Interconnecting Box

145317848
271SP021: RNCC: 3 | RNVC: 2
06930P008000: RNCC: 3 | RNVC: 2

18 Sep 2002

5975-14-471-4570
Nonmetallic Raceway

144714570
0017252013: RNCC: 3 | RNVC: 2

29 Aug 1994

5975-14-394-9053
Nonmetallic Raceway

143949053
13026: RNCC: 3 | RNVC: 2
G043X33C: RNCC: 5 | RNVC: 2

2 Oct 1984

5975-14-404-2642
Stuffing Tube

144042642
BVLE8: RNCC: 3 | RNVC: 2

11 Sep 1985

5975-14-508-0438
Cable Marker Sleeve

145080438
0248061: RNCC: 3 | RNVC: 2

26 Aug 1998

5975-14-504-2751
Cable Marker Sleeve

145042751
3613628M1: RNCC: 3 | RNVC: 2

11 Feb 1998

5975-33-202-6713
Cable Hanger

332026713
5034119: RNCC: 3 | RNVC: 2

24 Sep 2003

5975-14-309-5744
Cable Marker Sleeve

143095744
0084034530: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-33-107-4282
Interconnecting Box

331074282
W290683115000: RNCC: 3 | RNVC: 2

14 Oct 1999

5975-14-362-6033
Cable Marker Sleeve

143626033
03600101015I: RNCC: 3 | RNVC: 2
360101REPI: RNCC: 5 | RNVC: 2
V09REPI: RNCC: 5 | RNVC: 2
3597470035160: RNCC: 5 | RNVC: 2

19 Mar 1980

5975-33-202-6715
Cable Hanger

332026715
5034121: RNCC: 3 | RNVC: 2

24 Sep 2003

5975-14-511-9033
Switch Box Case

145119033
45613468: RNCC: 3 | RNVC: 9

28 Jan 1999

5975-14-479-8176
Interconnecting Box

144798176
5621124U00: RNCC: 3 | RNVC: 2
5621124U00: RNCC: 5 | RNVC: 2
5621124U00: RNCC: 5 | RNVC: 9

7 Feb 1996

5975-15-158-0243
Cable Marker Sleeve

151580243
47915A139230: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-14-455-5567
Interconnecting Box

144555567
70902J122055: RNCC: 3 | RNVC: 2
122055: RNCC: 5 | RNVC: 2
5044904: RNCC: 5 | RNVC: 9

28 May 1992

5975-14-404-8439
Cable Marker Sleeve

144048439
29747541: RNCC: 3 | RNVC: 2

20 Nov 1985

5975-14-320-9938
Junction Box

143209938
15029255: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-489-4401
Stuffing Tube

144894401
181294: RNCC: 3 | RNVC: 2

23 Jul 1997

5975-27-056-5724
Cable Marker Sleeve

270565724
517006: RNCC: 5 | RNVC: 9

11 Apr 2012

5975-14-040-9598
Junction Box

140409598
15005587: RNCC: 3 | RNVC: 2

1 Jan 1972

5975-14-402-1153
Cable Marker Sleeve

144021153
401687: RNCC: 3 | RNVC: 2
BGE401687: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-276-4626
Fanning Strip

142764626
0270050020: RNCC: 3 | RNVC: 2
27005: RNCC: 5 | RNVC: 2

1 Jan 1971

5975-15-157-3800
Cable Marker Sleeve

151573800
47915A129730: RNCC: 1 | RNVC: 3

4 Jul 2003

5975-14-468-0756
Interconnecting Box

144680756
LYN008055010101: RNCC: 3 | RNVC: 2

9 Feb 1994

5975-27-052-4354
Cable Collar

270524354
10121HK0535: RNCC: 5 | RNVC: 9

24 Jan 2011

5975-14-515-1645
Junction Box

145151645
8406053: RNCC: 3 | RNVC: 2

9 Jul 1999

5975-14-324-1777
Junction Box Cover

143241777
701EQ0099F12REP2: RNCC: 3 | RNVC: 2
701EQ099REP2: RNCC: 5 | RNVC: 2

1 Jan 1975

5975-14-300-3199
Fanning Strip

143003199
15147305: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-295-1237
Cable Marker Sleeve

142951237
282254: RNCC: 3 | RNVC: 2
282254: RNCC: 5 | RNVC: 9

1 Jan 1973

5975-14-402-2645
Junction Box

144022645
6DMLSANSJRE: RNCC: 3 | RNVC: 2
RAR4670: RNCC: 5 | RNVC: 2

26 Jun 1985

5975-14-468-8471
Junction Box

144688471
410501: RNCC: 3 | RNVC: 2
BJQ410501: RNCC: 5 | RNVC: 2

23 Mar 1994

5975-14-457-6878
Cable Collar

144576878
1-00403210: RNCC: 3 | RNVC: 2

15 Sep 1992

5975-33-206-3144
Raceway Elbow

332063144
78323-2: RNCC: 3 | RNVC: 2

5 Nov 2007

5975-14-398-7709
Stuffing Tube

143987709
93291947004C: RNCC: 3 | RNVC: 9
93291947004/C: RNCC: 5 | RNVC: 9

19 Feb 1985

5975-33-103-5213
Conduit Outlet

331035213
4011-4: RNCC: 3 | RNVC: 2

26 Apr 1995

5975-14-330-5121
Stuffing Tube

143305121
412862-1: RNCC: 3 | RNVC: 2

2 Jul 1975

5975-14-414-8209
Junction Box

144148209
037-48223-0: RNCC: 3 | RNVC: 9

12 Mar 1987

5975-14-471-4728
Cable Marker Sleeve

144714728
036200080015: RNCC: 3 | RNVC: 2
T286-468: RNCC: 5 | RNVC: 2
3597470047293: RNCC: 5 | RNVC: 2
362008REP5: RNCC: 5 | RNVC: 2

31 Aug 1994

5975-14-457-6880
Cable Collar

144576880
1-00404260: RNCC: 3 | RNVC: 2

15 Sep 1992

5975-14-467-2178
Interconnecting Box

144672178
46070296: RNCC: 3 | RNVC: 9

21 Dec 1993

5975-15-152-1742
Blank Panel

151521742
543729924A: RNCC: 3 | RNVC: 2

9 Aug 2000

5975-33-187-2558
Rigid Metal Conduit

331872558
PRACTIC.T.B.21: RNCC: 3 | RNVC: 2

20 Jul 1995

5975-33-200-6202
Stuffing Tube

332006202
IN-050-1977/78-E04I.CC09: RNCC: 3 | RNVC: 2

7 Feb 2002

5975-14-342-0067
Interior Cable Rack

143420067
VI90D108SZ195: RNCC: 3 | RNVC: 2
VI90D108SZ195: RNCC: 5 | RNVC: 2
102075: RNCC: 5 | RNVC: 9
VI90D108SZ195: RNCC: 5 | RNVC: 9

14 Apr 1977

5975-14-228-0444
Ground Rod

142280444
TT9178: RNCC: 3 | RNVC: 2
DCEA9178: RNCC: 3 | RNVC: 2

1 Jan 1966

5975-14-389-1525
Cable Marker Sleeve

143891525
P075-4: RNCC: 3 | RNVC: 2

29 Nov 1983

5975-27-006-7276
Blank Panel

270067276
1.HIBM-1D-410: RNCC: 2 | RNVC: 1

8 Apr 1999

5975-14-554-5973
Cable Marker Sleeve

145545973
0084302000: RNCC: 3 | RNVC: 2

24 Jul 2007

5975-14-445-4450
Ground Rod

144454450
MX1039A00: RNCC: 3 | RNVC: 2

14 Feb 1991

5975-14-421-2345
Raceway Cover

144212345
547051: RNCC: 3 | RNVC: 2
CV100: RNCC: 3 | RNVC: 2
102118: RNCC: 3 | RNVC: 9

11 Jan 1988

5975-14-438-7165
Chassis Base

144387165
ZS1225: RNCC: 3 | RNVC: 2

2 Apr 1990

5975-14-544-4359
Cable Marker Sleeve

145444359
20003-315: RNCC: 3 | RNVC: 2
101001011M12A: RNCC: 3 | RNVC: 9

31 Jan 2005

5975-14-425-4702
Cable Marker Sleeve

144254702
20669833: RNCC: 3 | RNVC: 2
20669833: RNCC: 3 | RNVC: 9

6 Jul 1988

5975-14-306-9003
Cable Marker Sleeve

143069003
0084052280: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-523-7308
Interconnecting Box

145237308
W3054995: RNCC: 3 | RNVC: 2

31 Jan 2001

5975-14-394-5692
Junction Box

143945692
263E64346111000016: RNCC: 3 | RNVC: 2

28 Aug 1984

5975-15-197-5571
Raceway Elbow

151975571
PN UAS 00047497: RNCC: 3 | RNVC: 2
6150F76039060: RNCC: 5 | RNVC: 9

8 Apr 2004

5975-14-466-6268
Ground Rod

144666268
45399905: RNCC: 3 | RNVC: 2
45399905: RNCC: 3 | RNVC: 9

17 Nov 1993

5975-14-470-0619
Switch Box Case

144700619
7349713-97: RNCC: 3 | RNVC: 2
734971397: RNCC: 5 | RNVC: 2

26 May 1994

5975-14-449-3506
Cable Marker Sleeve

144493506
353042-01REPD: RNCC: 3 | RNVC: 2

7 Aug 1991

5975-14-505-7613
Ground Rod

145057613
MB3264F00: RNCC: 3 | RNVC: 2

26 Mar 1998

5975-14-299-1209
Metallic Raceway

142991209
121E63-413-08-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5975-14-517-0241
Junction Box Cover

145170241
EA5M601-60-801: RNCC: 3 | RNVC: 2

28 Oct 1999

5975-14-371-3214
Cable Marker Sleeve

143713214
362107-01REP4: RNCC: 3 | RNVC: 2
V40-01REP4: RNCC: 5 | RNVC: 2
BBZ2132: RNCC: 5 | RNVC: 2

5 Aug 1981

5975-14-433-1233
Cable Marker Sleeve

144331233
352014-10: RNCC: 3 | RNVC: 2

11 Jul 1989

5975-14-350-1235
Guy

143501235
NO PRIMARY REF14-350-1235: RNCC: 3 | RNVC: 2
DHV2481R0UGE: RNCC: 5 | RNVC: 9

14 Jun 1978

5975-14-420-7467
Cable Marker Sleeve

144207467
ST400S58P201-055: RNCC: 3 | RNVC: 2
1-055: RNCC: 5 | RNVC: 9

16 Dec 1987

5975-14-516-7590
Crossarm Brace

145167590
376-100-12: RNCC: 3 | RNVC: 2

13 Oct 1999

5975-14-506-7606
Cable Marker Sleeve

145067606
HT30-25J0: RNCC: 3 | RNVC: 2

14 May 1998

5975-14-439-3243
Cable Marker Sleeve

144393243
D51900-168: RNCC: 3 | RNVC: 2

25 Apr 1990

Load More Results