What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 115 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 115of 491

5975-00-141-0546
Conduit Outlet

001410546
TWOLB-4: RNCC: 3 | RNVC: 2
LB49MT: RNCC: 5 | RNVC: 9
LB34: RNCC: 5 | RNVC: 9
LB-100SS: RNCC: 5 | RNVC: 9
15-123: RNCC: 5 | RNVC: 9
LB-49MT: RNCC: 5 | RNVC: 9
17503: RNCC: 5 | RNVC: 9
ELB-13: RNCC: 5 | RNVC: 9

17 Dec 1969

5975-00-141-0051
Conduit Outlet

001410051
LB29MT: RNCC: 3 | RNVC: 9
TWOLB-2: RNCC: 5 | RNVC: 2
LB29MT: RNCC: 5 | RNVC: 9
LB32: RNCC: 5 | RNVC: 9
15-73: RNCC: 5 | RNVC: 9
17501: RNCC: 5 | RNVC: 9
ELB-11: RNCC: 5 | RNVC: 9

17 Dec 1969

5975-00-140-7572
Electrical Tie Down Mounting Base

001407572
AM2C: RNCC: 3 | RNVC: 2

10 Sep 1971

5975-00-140-7301
Rigid Metal Conduit

001407301
SMC499041-7: RNCC: 3 | RNVC: 2
HM3064-18: RNCC: E | RNVC: 8

10 Sep 1971

5975-00-134-4930
Electrical Box Connector

001344930
7916113: RNCC: 3 | RNVC: 2
7916113: RNCC: 5 | RNVC: 2
SKD4850-3: RNCC: 5 | RNVC: 9

18 Aug 1969

5975-00-134-0397
Conduit Outlet Cover

001340397
10105424: RNCC: 3 | RNVC: 2
1B4BB: RNCC: 3 | RNVC: 2
94121: RNCC: 5 | RNVC: 2
94121: RNCC: 5 | RNVC: 2
81014: RNCC: 5 | RNVC: 9
B-14: RNCC: 5 | RNVC: 9
94121: RNCC: 5 | RNVC: 9

13 Dec 1968

5975-00-132-9475
Flexible Metal Conduit

001329475
A-A-52440-1B-4: RNCC: 2 | RNVC: 2
A-A-52440: RNCC: 4 | RNVC: 1
MILC13909: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-125-2347
Jack Strip

001252347
PJ724: RNCC: 3 | RNVC: 2
CN-J0152-001: RNCC: 5 | RNVC: 2

11 Nov 1968

5975-00-122-2356
Knockout Cover

001222356
12-0600-0075: RNCC: 3 | RNVC: 2
MP-0850520: RNCC: 5 | RNVC: 2
066-010561-005: RNCC: 5 | RNVC: 9
K0C3-4: RNCC: 5 | RNVC: 9
K0C075: RNCC: 5 | RNVC: 9

28 Oct 1968

5975-00-122-2359
Electrical Equipment Shelf

001222359
DL87-5136: RNCC: 3 | RNVC: 2
SA-B2343-2359: RNCC: 3 | RNVC: 2
SK2419: RNCC: 5 | RNVC: 2
9002-674: RNCC: 5 | RNVC: 9
DL2419RS: RNCC: 5 | RNVC: 9

28 Oct 1968

5975-00-114-9835
Junction Box Cover

001149835
8461: RNCC: 3 | RNVC: 2

24 Dec 1972

5975-00-114-5031
Housing

001145031
G6046KD: RNCC: 3 | RNVC: 2

24 Dec 1972

5975-00-114-0019
Electrical Equipment Mounting Base

001140019
547-1648-003: RNCC: 3 | RNVC: 2
547-1648-003: RNCC: 5 | RNVC: 2
547-1648-003: RNCC: 5 | RNVC: 2
SI-7991: RNCC: 5 | RNVC: 2

9 Sep 1968

5975-00-113-5257
Conduit Outlet Cover

001135257
490: RNCC: 3 | RNVC: 9
490: RNCC: 5 | RNVC: 2

6 Sep 1968

5975-00-113-5254
Conduit Outlet Cover

001135254
290: RNCC: 3 | RNVC: 2

6 Sep 1968

5975-00-113-3657
Gland Assembly

001133657
10-257921-123: RNCC: 3 | RNVC: 2

30 Aug 1968

5975-00-110-5887
Cable Hanger

001105887
343-0089-00: RNCC: 3 | RNVC: 2

9 Aug 1968

5975-00-108-6464
Junction Box

001086464
383: RNCC: 3 | RNVC: 2
105353-1: RNCC: 5 | RNVC: 2
440: RNCC: E | RNVC: 8
440: RNCC: E | RNVC: 8

17 Dec 1972

5975-00-107-8198
Cable Strain Relief Bushing

001078198
SR7K2: RNCC: 3 | RNVC: 2
SR7K2BLK: RNCC: C | RNVC: 1
568126-1: RNCC: C | RNVC: 1
1240: RNCC: E | RNVC: 8
38-2023-00: RNCC: E | RNVC: 8

24 Dec 1972

5975-00-106-4339
Conduit Outlet

001064339
FS12: RNCC: 3 | RNVC: 2
FS-2-50: RNCC: 5 | RNVC: 9

12 Jul 1968

5975-00-106-4320
Electrical-Electronic Equipment Chassis

001064320
CU3012A: RNCC: 3 | RNVC: 9

26 Jul 1968

5975-00-101-5487
Electrical Equipment Leg

001015487
10044352: RNCC: 3 | RNVC: 2

5 Jun 1968

5975-00-098-5130
Gear Clamp

000985130
503-4750-001: RNCC: 3 | RNVC: 2
AD0315890: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-097-8512
Electrical Wall Plate

000978512
SS11: RNCC: 3 | RNVC: 2
93181: RNCC: 5 | RNVC: 9
93181: RNCC: 5 | RNVC: 9
97181: RNCC: 5 | RNVC: 9

24 May 1968

5975-00-097-8116
Electrical Conduit Union

000978116
AA50553-2-1-G-1-10-S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
WF408: RNCC: 5 | RNVC: 9
FEDSTD156: RNCC: 5 | RNVC: 9
AA-50553-II-A-G: RNCC: 5 | RNVC: 9
AA50553-2-1-G-10-S: RNCC: 5 | RNVC: 9

29 May 1968

5975-00-097-8112
Electrical Conduit Union

000978112
AA50553-2-1-G-1-06-S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
FEDSTD156: RNCC: 5 | RNVC: 9
WF408: RNCC: 5 | RNVC: 9
680: RNCC: E | RNVC: 8

29 May 1968

5975-00-097-8115
Electrical Conduit Union

000978115
AA50553-II-1-G-09-M: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
WF408: RNCC: 5 | RNVC: 9
FEDSTD156: RNCC: 5 | RNVC: 9

29 May 1968

5975-00-097-8114
Electrical Conduit Union

000978114
AA50553-2-1-G-1-08-S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
W-F-408: RNCC: 5 | RNVC: 9
FEDSTD156: RNCC: 5 | RNVC: 9

29 May 1968

5975-00-097-8113
Electrical Conduit Union

000978113
AA50553-2-1-G-1-07-S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
FEDSTD156: RNCC: 5 | RNVC: 9
WF408: RNCC: 5 | RNVC: 9

29 May 1968

5975-00-097-8110
Electrical Conduit Union

000978110
AA50553-II-1-G-04-C: RNCC: 2 | RNVC: 2
AA50553A: RNCC: 4 | RNVC: 1
678: RNCC: 5 | RNVC: 1
FEDSTD156: RNCC: 5 | RNVC: 9
WF408: RNCC: 5 | RNVC: 9
EC125: RNCC: E | RNVC: 8
13703: RNCC: E | RNVC: 8
273-S: RNCC: E | RNVC: 8
4-125: RNCC: E | RNVC: 8

29 May 1968

5975-00-096-2665
Flexible Metal Conduit Assembly

000962665
ECLK118: RNCC: 3 | RNVC: 2
ECLK-50-18: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-094-5959
Rigid Metal Conduit Assembly

000945959
14-28739-21: RNCC: 3 | RNVC: 9

6 Dec 1972

5975-00-092-4425
Electrical Equipment Shelf

000924425
GA468: RNCC: 3 | RNVC: 9

3 Dec 1972

5975-00-091-8718
Cable Clamp

000918718
SC-B-40773: RNCC: 3 | RNVC: 2
5800041-0026-000: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-090-5274
Cable Hanger

000905274
28-09850: RNCC: 3 | RNVC: 9
T985: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-090-4881
Electrical Conduit Ferrule

000904881
10-40461-145: RNCC: 3 | RNVC: 2
10-40726-142: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-089-8408
Electrical-Electronic Equipment Chassis

000898408
SMD619711: RNCC: 3 | RNVC: 2
836661-801: RNCC: 5 | RNVC: 2

27 Jul 1967

5975-00-089-7588
Spacer

000897588
S526393S7132: RNCC: 3 | RNVC: 9

13 Jul 1967

5975-00-089-2143
Junction Box

000892143
335: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-089-1909
Conduit Outlet Cover

000891909
7382: RNCC: 3 | RNVC: 2
7382: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-087-9400
Duct Tee

000879400
B0M4550: RNCC: 3 | RNVC: 9

16 May 1967

5975-00-087-9407
Raceway Coupler

000879407
B0M4561: RNCC: 3 | RNVC: 9

25 May 1967

5975-00-087-9405
Raceway Tee

000879405
B0M4557: RNCC: 3 | RNVC: 9

16 May 1967

5975-00-087-9395
Sq.Elbow Duct 4In

000879395
B0M4547: RNCC: 3 | RNVC: 9

16 May 1967

5975-00-087-9396
Sq R-Ins Duct 4In

000879396
B0M4548: RNCC: 3 | RNVC: 9

16 May 1967

5975-00-087-0673
Electrical Conduit Adapter

000870673
1050A: RNCC: 3 | RNVC: 9
TWAD-50: RNCC: 5 | RNVC: 2
2062: RNCC: 5 | RNVC: 9
785: RNCC: 5 | RNVC: 9
TA-101: RNCC: 5 | RNVC: 9
681: RNCC: 5 | RNVC: 9
1141: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-086-6949
Electrical Equipment Mounting Base

000866949
5MD383387A: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-079-8784
Electrical Conduit Bushing

000798784
AA50553-3-1-Q-9-08-M: RNCC: 2 | RNVC: 2
AA50553: RNCC: 4 | RNVC: 1
WF408: RNCC: 5 | RNVC: 9
AA50553-3-1-Q-9-0: RNCC: 5 | RNVC: 9
033756-0007: RNCC: E | RNVC: 8
BLG3122: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-079-0022
Insulator Pin

000790022
4717: RNCC: 3 | RNVC: 9
3137: RNCC: 5 | RNVC: 9
DP3T1: RNCC: 5 | RNVC: 9
DP5S3: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-078-7088
Electrical Box Connector

000787088
8100W: RNCC: 3 | RNVC: 9
4232: RNCC: 5 | RNVC: 2
4232: RNCC: 5 | RNVC: 2
772: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-076-1665
Flexible Metal Conduit Assembly

000761665
ECGJH136: RNCC: 3 | RNVC: 2
EXGJH136: RNCC: 5 | RNVC: 2
ECGJH136: RNCC: 5 | RNVC: 9

2 Aug 1967

5975-00-076-1672
Flexible Metal Conduit Assembly

000761672
EXGJH-115: RNCC: 3 | RNVC: 2
ECGJH115: RNCC: 3 | RNVC: 2
ECF-115: RNCC: 3 | RNVC: 2
EXGJH-115: RNCC: 5 | RNVC: 9
ECGJH-50-15: RNCC: 5 | RNVC: 9

2 Aug 1967

5975-00-076-1674
Flexible Metal Conduit Assembly

000761674
ECGJH110: RNCC: 3 | RNVC: 2
EXHF110: RNCC: 5 | RNVC: 2
ECGJH110: RNCC: 5 | RNVC: 9

2 Aug 1967

5975-00-075-0448
Electrical Nonmetallic Conduit Assembly

000750448
ECLK124: RNCC: 3 | RNVC: 2
ECLK-50-24: RNCC: 5 | RNVC: 9

2 Aug 1967

5975-00-072-6075
Electrical Cable Nipple

000726075
2360-2074: RNCC: 3 | RNVC: 2
11139448: RNCC: 3 | RNVC: 2
2360-2074: RNCC: 5 | RNVC: 9
2360-2094: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-070-4498
Electrical-Electronic Equipment Chassis

000704498
983432-3: RNCC: 3 | RNVC: 2

13 Jul 1967

5975-00-069-9324
Conduit Outlet

000699324
GUAL-150: RNCC: 3 | RNVC: 9
GUAL59: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-068-7915
Junction Box

000687915
8018105: RNCC: 3 | RNVC: 2
ESCB884: RNCC: 5 | RNVC: 9
8X8X4: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-068-7923
Junction Box

000687923
12X12X6: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-068-7919
Junction Box

000687919
AB-664SBG: RNCC: 3 | RNVC: 2
6X6X4: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-068-7916
Junction Box

000687916
AB-886SBG: RNCC: 3 | RNVC: 2
18460: RNCC: 5 | RNVC: 9
8X8X6: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-066-8071
Power Sup Top Cover

000668071
0N008602: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-066-3581
Electrical Equipment Rack

000663581
2589228-1: RNCC: 3 | RNVC: 2
2589228-1: RNCC: 5 | RNVC: 2

29 Jun 1967

5975-00-064-4772
Electrical Box Connector

000644772
ST250: RNCC: 3 | RNVC: 1
5238: RNCC: 5 | RNVC: 2
4Q-250: RNCC: 5 | RNVC: 9
4Q-250: RNCC: 5 | RNVC: 9
LT-250: RNCC: 5 | RNVC: 9
11-250: RNCC: 5 | RNVC: 9
773735-8: RNCC: 7 | RNVC: 2

29 Jun 1967

5975-00-064-0321
Junction Box Cover

000640321
65550-02036-044: RNCC: 3 | RNVC: 2

22 Jun 1967

5975-00-064-0317
Junction Box Cover

000640317
65550-02036-043: RNCC: 3 | RNVC: 2

22 Jun 1967

5975-00-063-3736
Junction Box

000633736
A-606CHRFI: RNCC: 3 | RNVC: 9
69C37523-2: RNCC: 7 | RNVC: 2

27 Jun 1967

5975-00-062-4758
Electrical Equipment Leg

000624758
MT2786PRC47: RNCC: 3 | RNVC: 2
549-6473-000: RNCC: 5 | RNVC: 2
549-6473-00: RNCC: 5 | RNVC: 2
549-6473-000: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-060-4050
Junction Box Cover

000604050
ZT76-152B-COT-5-EE: RNCC: 3 | RNVC: 2
MT22941-050-010: RNCC: 5 | RNVC: 9

15 Jun 1967

5975-00-060-0314
Conduit Outlet

000600314
LBH50: RNCC: 3 | RNVC: 2
ELBD-150: RNCC: 5 | RNVC: 2

16 Dec 1973

5975-00-060-0306
Electrical Conduit Sealing Fitting

000600306
EYS4: RNCC: 3 | RNVC: 2
EY-125: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-060-0312
Conduit Outlet

000600312
LBH10: RNCC: 3 | RNVC: 2
ELBD-50: RNCC: 5 | RNVC: 2
XLB-1: RNCC: 5 | RNVC: 2
LBH-0507: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-058-5223
Conduit Outlet

000585223
LB28RFI: RNCC: 3 | RNVC: 2

13 Jun 1967

5975-00-058-5234
Conduit Outlet

000585234
LL38RFI: RNCC: 3 | RNVC: 2

13 Jun 1967

5975-00-058-5162
Conduit Outlet

000585162
LB38W/380FANDGASK853N: RNCC: 3 | RNVC: 2
LB100/BC-100GANDASKSGN-100: RNCC: 5 | RNVC: 9
LB38RFI: RNCC: 5 | RNVC: 9

13 Jun 1967

5975-00-058-2229
Electrical Conduit Nipple

000582229
ANSI UL6: RNCC: 3 | RNVC: 1
WWC581: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-058-2227
Electrical Conduit Nipple

000582227
LS35066-06-48: RNCC: 3 | RNVC: 2
WWC581: RNCC: 4 | RNVC: 1
LS35066-06-48: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-058-2223
Electrical Conduit Nipple

000582223
ANSI UL6: RNCC: 3 | RNVC: 1
WWC581: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-058-2222
Electrical Conduit Nipple

000582222
ANSI UL514B: RNCC: 3 | RNVC: 1
WWC581: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-058-1866
Conduit Outlet

000581866
FDCT2: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-057-9410
Electrical Conduit Bushing

000579410
AA50553- 31Q107M: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
WF408: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-056-5577
Cable Button

000565577
541-5188-002: RNCC: 3 | RNVC: 2
541-5188-002: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-056-4383
Junction Box

000564383
225: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-056-3986
Electrical Conduit Nipple

000563986
LS35066-06-11: RNCC: 3 | RNVC: 2
WWC581: RNCC: 4 | RNVC: 1
LS35066-06-11: RNCC: 5 | RNVC: 2

1 Jun 1967

5975-00-054-6319
Conduit Outlet

000546319
AA50563-101ALRLA: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
L17: RNCC: 5 | RNVC: 1
LRL50N-M: RNCC: 5 | RNVC: 1
WC586: RNCC: 5 | RNVC: 9
L-50NT: RNCC: 5 | RNVC: 9
TYPE I DESIGN I STYLE LRL: RNCC: 5 | RNVC: 9
70-59: RNCC: 5 | RNVC: 9
L17: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-054-6320
Conduit Outlet

000546320
A-A-50563: RNCC: 4 | RNVC: 1
LRL75M: RNCC: 5 | RNVC: 2
W-C-586: RNCC: 5 | RNVC: 9
L-75: RNCC: 5 | RNVC: 9
L-75: RNCC: 5 | RNVC: 9
70-79: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-054-6321
Conduit Outlet

000546321
AA50563-101ALRLC: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
LRL100M: RNCC: 5 | RNVC: 1
L37: RNCC: 5 | RNVC: 1
TYPE 1 DESIGN 1 STYLE LRL: RNCC: 5 | RNVC: 9
L37: RNCC: 5 | RNVC: 9
70-109: RNCC: 5 | RNVC: 9
WC586: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-054-1865
Electrical Entrance Cap

000541865
AA50563-628GE: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
SP1529: RNCC: 5 | RNVC: 9
WC586: RNCC: 5 | RNVC: 9
TYPE VI DESIGN 28 FORM 7: RNCC: 5 | RNVC: 9

25 May 1967

5975-00-054-1860
Electric Conduit Support

000541860
UPC-75G: RNCC: 3 | RNVC: 9
PC3-4: RNCC: 5 | RNVC: 9
PAR3-4: RNCC: 5 | RNVC: 9

20 May 1967

5975-00-054-1861
Electric Conduit Support

000541861
UPC-50G: RNCC: 3 | RNVC: 9
PAR1-2: RNCC: 5 | RNVC: 9
PC1-2: RNCC: 5 | RNVC: 9

20 May 1967

5975-00-054-1630
Electrical Wall Plate

000541630
49340REQUAL: RNCC: 3 | RNVC: 9
4939: RNCC: 5 | RNVC: 2

15 Dec 1967

5975-00-054-1005
Electrical Cable Nipple

000541005
32GREEN: RNCC: 3 | RNVC: 2
993272-02: RNCC: 5 | RNVC: 2
916B326-26: RNCC: 5 | RNVC: 9
916B326-26: RNCC: 7 | RNVC: 2
413327-15: RNCC: 7 | RNVC: 2

29 May 1968

5975-00-053-3047
Electrical Conductor Bushing

000533047
4952: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-051-7332
Blank Panel

000517332
9A-2575: RNCC: 3 | RNVC: 2
9A-2575: RNCC: 3 | RNVC: 9
DL88-5145: RNCC: 5 | RNVC: 2
PA1105MG: RNCC: 5 | RNVC: 2
1001-012-052: RNCC: 5 | RNVC: 2
RI-013-052: RNCC: 5 | RNVC: 9

16 May 1967

5975-00-051-5927
Blank Panel

000515927
MAP119: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-050-0220
Electrical Conduit Elbow

000500220
C14355: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-049-9057
Metallic Raceway

000499057
1500: RNCC: 3 | RNVC: 2
WR32: RNCC: 4 | RNVC: 1

1 Jan 1961

5975-00-044-4770
Electrical Equipment Mounting Base

000444770
1509594-901: RNCC: 3 | RNVC: 2
MT2585APN150V: RNCC: 5 | RNVC: 9

17 May 1968

5975-00-043-0778
Electrical Equipment Shelf

000430778
SA1719GT: RNCC: 3 | RNVC: 2

15 May 1968

5975-00-040-2363
Wiring Junction Cover

000402363
8330140: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-038-2598
Electrical Conductor Bushing

000382598
5M13-20: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-038-2310
Junction Box Extension

000382310
5739A: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-038-2306
Internal Raceway Elbow

000382306
V517: RNCC: 3 | RNVC: 2
517: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-035-6522
Bushing

000356522
1502: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-035-5917
Ignition Cable Protector

000355917
AN4060-1: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-034-3479
Electrical Equipment Leg Section

000343479
10064280: RNCC: 3 | RNVC: 2

6 May 1967

5975-00-033-5722
Junction Box

000335722
227467-90: RNCC: 3 | RNVC: 2
227467PC90: RNCC: 5 | RNVC: 2
SK58255: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-033-4917
Junction Box Cover

000334917
N3380: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-031-1703
Contact Asy

000311703
1797-1076G1: RNCC: 3 | RNVC: 2
1797-1076G1: RNCC: 5 | RNVC: 2
1797-1076G1: RNCC: 5 | RNVC: 2
1797-1076G1: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-027-4598
Electrical Components Tie Down Strap

000274598
PLC1MS4-0: RNCC: 3 | RNVC: 2
4049-0027: RNCC: 3 | RNVC: 2
AS50931: RNCC: 5 | RNVC: 1
TY13-0: RNCC: 5 | RNVC: 2
TY13-0: RNCC: 5 | RNVC: 2
59A5A116: RNCC: 5 | RNVC: 2
PLC1MS4CM: RNCC: 5 | RNVC: 9
4049-0027: RNCC: 5 | RNVC: 9
59A5A116: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-026-8433
Plain Plug

000268433
227467PC6: RNCC: 3 | RNVC: 2
227467PC6: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-014-0784
Cable Spacer

000140784
B4-2: RNCC: 3 | RNVC: 2
B4-2: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-013-9291
Electrical Equipment Leg Section

000139291
2553005-1: RNCC: 3 | RNVC: 2
2553005: RNCC: D | RNVC: 9

3 May 1968

5975-00-012-4376
Electrical Conductor Bushing

000124376
SB2000-26: RNCC: 3 | RNVC: 2
287Z31D16: RNCC: 5 | RNVC: 2
077-003712-054: RNCC: 7 | RNVC: 2

1 Jan 1961

5975-00-011-3455
Junction Box

000113455
G2BAS2: RNCC: 3 | RNVC: 2
G2BA: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-007-5141
Electrical Conductor Bushing

000075141
SMA587746: RNCC: 3 | RNVC: 2
SMA587746: RNCC: 5 | RNVC: 2

14 Jul 1972

5975-00-003-7844
Electrical-Electronic Equipment Chassis

000037844
332254: RNCC: 3 | RNVC: 2
332254: RNCC: 5 | RNVC: 9

19 May 1972

5975-00-003-0933
Junction Box Cover

000030933
500DR: RNCC: 3 | RNVC: 2
500DR: RNCC: 3 | RNVC: 9
500ALDR: RNCC: 5 | RNVC: 9

11 May 1972

5975-12-384-5989
Junction Box

123845989
01.181810: RNCC: 3 | RNVC: 2
908083629: RNCC: 5 | RNVC: 2

10 Mar 2011

5975-99-421-2162
Bulkhea Cable Gland

994212162
RM10/0X12: RNCC: 3 | RNVC: 2
DRAWING:S1000688: RNCC: 5 | RNVC: 1
012WX-035: RNCC: 6 | RNVC: 9

26 Nov 2001

5975-01-687-3773
Conduit Outlet Cover

016873773
8827496: RNCC: 3 | RNVC: 2

31 Mar 2020

5975-01-678-3403
Electrical-Electronic Equipment Chassis

016783403
176-1003-000-0C: RNCC: 3 | RNVC: 2
1058758-001-AS: RNCC: D | RNVC: 9

1 Feb 2019

5975-01-659-4953
Junction Box

016594953
574A: RNCC: 3 | RNVC: 2

30 Nov 2016

5975-01-675-8249
Electrical-Electronic Equipment Panel

016758249
3892351: RNCC: 3 | RNVC: 2

28 Sep 2018

5975-01-665-5626
Electrical Conduit Adapter

016655626
712S380NF4040-3C: RNCC: 3 | RNVC: 2

4 Aug 2017

5975-01-650-2645
Interconnecting Box

016502645
12580285: RNCC: 3 | RNVC: 2

24 Nov 2015

5975-01-662-6156
Electrical Fitting Mounting Base

016626156
EB35DIN: RNCC: 3 | RNVC: 2

13 Apr 2017

5975-01-640-8813
Electrical Conductor Bushing

016408813
56-9200-2: RNCC: 3 | RNVC: 2
97-3918ITEM5: RNCC: C | RNVC: 1

30 Dec 2014

5975-01-628-5622
Blank Panel

016285622
XPN-1719-FP: RNCC: 3 | RNVC: 2

30 May 2014

5975-01-559-3934
Conduit Outlet Cover

015593934
71695K67: RNCC: 3 | RNVC: 2

17 Dec 2007

5975-01-592-9273
Electrical Conduit Elbow

015929273
5975-2195: RNCC: 3 | RNVC: 2
7119K87: RNCC: 5 | RNVC: 2

29 Mar 2011

5975-01-590-9434
Cable Tie Installation Tool

015909434
A31189: RNCC: 1 | RNVC: 2
600-059: RNCC: 3 | RNVC: 2
10184029: RNCC: 6 | RNVC: 9

4 Jan 2011

5975-01-550-3323
Junction Box

015503323
306-9004: RNCC: 3 | RNVC: 2

17 Apr 2007

5975-01-529-7752
Junction Box

015297752
J604W+BP-64-AL: RNCC: 3 | RNVC: 2
J604W+BP-64: RNCC: 5 | RNVC: 9
J604W+BP-64-4L: RNCC: 5 | RNVC: 9
YMD-9407: RNCC: 5 | RNVC: 9

29 Apr 2005

5975-01-542-1717
Junction Box

015421717
A6044NFSS6: RNCC: 3 | RNVC: 2
A6044NFSS6: RNCC: 3 | RNVC: 9
M-307810 B0 ITEM 91: RNCC: 5 | RNVC: 1

25 Jul 2006

5975-01-472-0165
Strain Electrical Conductor Clamp

014720165
30-302-1D03G06: RNCC: 3 | RNVC: 2
30-302-1D03G06: RNCC: 5 | RNVC: 2
30-302-1D03G06: RNCC: 5 | RNVC: 2
30-302-1D03G06: RNCC: 5 | RNVC: 2
30-302-1D03G06: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-388-1746
Electronic Equipment Mounting Tray

013881746
6687345-9: RNCC: 3 | RNVC: 2

22 Mar 1994

5975-01-388-7358
Transit Frame

013887358
S 6X1 ALUM (ART#S006000000131): RNCC: 3 | RNVC: 2
A-6: RNCC: 3 | RNVC: 9
A-6: RNCC: 5 | RNVC: 9

6 Apr 1994

5975-01-388-7241
Transit Frame

013887241
S 4X1 ALU EXTRUD: RNCC: 3 | RNVC: 2
A-4: RNCC: 5 | RNVC: 9
A-4: RNCC: 5 | RNVC: 9

6 Apr 1994

5975-01-390-7358
Electrical Equipment Cabinet

013907358
3825254: RNCC: 3 | RNVC: 2
846791-2: RNCC: 5 | RNVC: 9

25 May 1994

5975-01-319-6616
Cable Hanger

013196616
5002359: RNCC: 3 | RNVC: 2

11 May 1990

5975-01-216-9333
Stuffing Tube Packing Nut

012169333
M24235/14-062: RNCC: 2 | RNVC: 2
MIL-S-24235: RNCC: 4 | RNVC: 1
1213E1527 FIND 41: RNCC: 5 | RNVC: 1
1213E1527 FIND 41: RNCC: 5 | RNVC: 9

19 Sep 1985

5975-01-037-4290
Electrical Equipment Mounting Base

010374290
ETN-9750: RNCC: 3 | RNVC: 2
L02301: RNCC: 3 | RNVC: 2
4047-1258PIECE: RNCC: C | RNVC: 1
303-61-001: RNCC: C | RNVC: 1

18 Mar 1977

5975-00-610-5875
Metallic Raceway

006105875
G-3000B: RNCC: 3 | RNVC: 2
32341063: RNCC: 5 | RNVC: 9
3000B: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-475-2407
Internal Corner Coupling

004752407
G-3017TCE: RNCC: 3 | RNVC: 2
G3017TC: RNCC: 5 | RNVC: 9
17-1-5984-1: RNCC: 7 | RNVC: 2
3017TCE: RNCC: C | RNVC: 1

1 Jan 1963

5975-01-694-8538
Electrical Equipment Mounting Base

016948538
D1268849-1: RNCC: 3 | RNVC: 2

29 Apr 2021

5975-01-694-6991
Electronic Equipment Mounting Tray

016946991
12467093: RNCC: 3 | RNVC: 2

19 Apr 2021

5975-01-694-5834
Transport Upgrade

016945834
1USHL-139-TRNSUPGRD: RNCC: 3 | RNVC: 2
B3984915-2: RNCC: 7 | RNVC: 2
B3984915: RNCC: D | RNVC: 9

12 Apr 2021

5975-01-694-5826
Electrical Equipment Shelf

016945826
1USHL-139: RNCC: 3 | RNVC: 2
70029624: RNCC: 5 | RNVC: 2
B3984915-1: RNCC: 7 | RNVC: 2
B3984915: RNCC: D | RNVC: 9

12 Apr 2021

5975-01-694-1710
Blank Panel

016941710
331E00116500: RNCC: 3 | RNVC: 2
331E00116500: RNCC: C | RNVC: 1

19 Mar 2021

5975-01-693-7646
Junction Box

016937646
8592608-200: RNCC: 3 | RNVC: 2
311-8592608 FIND NUMBER 2: RNCC: C | RNVC: 1
311-8592608: RNCC: D | RNVC: 9

4 Mar 2021

5975-01-689-7745
Junction Box

016897745
3596AS440-1: RNCC: 3 | RNVC: 2
3596AS440: RNCC: D | RNVC: 9

9 Jul 2020

5975-01-685-6182
Sleeve Assembly

016856182
2712750: RNCC: 3 | RNVC: 2
2712750: RNCC: 5 | RNVC: 2
2712750: RNCC: 5 | RNVC: 9

2 Jan 2020

5975-01-678-8134
Electrical Fitting Mounting Base

016788134
1704: RNCC: 3 | RNVC: 2
10452: RNCC: 5 | RNVC: 2

27 Feb 2019

5975-01-672-3749
Cable Hanger

016723749
04-2815616-1: RNCC: 3 | RNVC: 2

30 Apr 2018

5975-01-672-0375
Electrical Equipment Cabinet

016720375
A1-46080D: RNCC: 3 | RNVC: 2

19 Apr 2018

5975-01-670-7837
Mounting Plate

016707837
1025712-001: RNCC: 3 | RNVC: 2

6 Mar 2018

5975-01-670-7539
Jet Hub Assembly

016707539
808-105: RNCC: 3 | RNVC: 2

5 Mar 2018

5975-01-669-3808
Electrical-Electronic Equipment Chassis

016693808
02-2802271-1: RNCC: 3 | RNVC: 2

9 Jan 2018

5975-01-665-5554
Electrical Conduit Adapter

016655554
712S380NF2424-3C: RNCC: 3 | RNVC: 2

4 Aug 2017

5975-01-663-9818
Electrical-Electronic Equipment Chassis

016639818
H274A249-01: RNCC: 3 | RNVC: 2

31 May 2017

5975-01-659-8522
Electrical Equipment Rack

016598522
1045727: RNCC: 3 | RNVC: 2

20 Dec 2016

5975-01-657-4892
Electrical Equipment Foot

016574892
2284T52: RNCC: 3 | RNVC: 2

16 Aug 2016

5975-01-656-5001
Mounting Plate

016565001
FR-0055-2086: RNCC: 3 | RNVC: 2

6 Jul 2016

5975-01-656-4991
Electrical-Electronic Equipment Panel

016564991
FR-0055-2243: RNCC: 3 | RNVC: 2

6 Jul 2016

5975-01-656-4988
Mounting Plate

016564988
IN-0055-0282: RNCC: 3 | RNVC: 2

6 Jul 2016

5975-01-656-4001
Electrical-Electronic Equipment Panel

016564001
FR-0055-2237: RNCC: 3 | RNVC: 2

29 Jun 2016

5975-01-656-3990
Electrical-Electronic Equipment Panel

016563990
FP-X60M: RNCC: 3 | RNVC: 2

29 Jun 2016

5975-01-656-3996
Electrical-Electronic Equipment Panel

016563996
FR-0055-2090: RNCC: 3 | RNVC: 2

29 Jun 2016

5975-01-653-2135
Electrical-Electronic Equipment Chassis

016532135
04-2825127-1: RNCC: 3 | RNVC: 2

15 Mar 2016

5975-01-648-4945
Electrical Equipment Mounting Base

016484945
3101203-502: RNCC: 3 | RNVC: 2

26 Sep 2015

5975-01-648-0728
Position Cntrl

016480728
07440190-3: RNCC: 3 | RNVC: 2
07440190-3: RNCC: 3 | RNVC: 2

14 Sep 2015

5975-01-643-5607
Electrical Cable Protector

016435607
034NPBSG: RNCC: 3 | RNVC: 9
PLS-3/4: RNCC: 5 | RNVC: 2
PLS-3/4: RNCC: 5 | RNVC: 9

7 Apr 2015

5975-01-643-3481
Flexible Metal Conduit

016433481
M24758-D: RNCC: 3 | RNVC: 2

30 Mar 2015

5975-01-642-8371
Electrical-Electronic Equipment Chassis

016428371
618-679-00: RNCC: 3 | RNVC: 2
618-679-00-AD: RNCC: D | RNVC: 9

11 Mar 2015

5975-01-632-6848
Cable Hanger

016326848
A24007-1: RNCC: 3 | RNVC: 2

27 Oct 2014

5975-01-630-6472
Electrical-Electronic Equipment Chassis

016306472
12083-2200-01: RNCC: 3 | RNVC: 2

12 Aug 2014

5975-01-629-7179
Electrical Equipment Mounting Base

016297179
3138413: RNCC: 3 | RNVC: 2
3138413: RNCC: 5 | RNVC: 2

11 Jul 2014

5975-01-629-2762
Electrical Equipment Mounting Base

016292762
300A451-1: RNCC: 3 | RNVC: 2

24 Jun 2014

5975-01-629-2240
Flexible Metal Conduit Assembly

016292240
RA-1276: RNCC: 3 | RNVC: 2

23 Jun 2014

5975-01-627-6394
Electrical Components Tie Down Strap

016276394
2105292-3: RNCC: 3 | RNVC: 2

21 Apr 2014

5975-01-622-4878
Strain Electrical Conductor Clamp

016224878
G6-14-8026-003: RNCC: 3 | RNVC: 2

9 Oct 2013

5975-01-620-5921
Electronic Equipment Mounting Tray

016205921
300A407-1: RNCC: 3 | RNVC: 2

31 Jul 2013

5975-01-615-5664
Electrical Nonmetallic Conduit Assembly

016155664
229A671-2: RNCC: 3 | RNVC: 2
202C621-71: RNCC: 5 | RNVC: 2

16 Jan 2013

5975-01-613-5248
Electrical-Electronic Equipment Chassis

016135248
TCR014511-10: RNCC: 3 | RNVC: 2

8 Nov 2012

5975-01-613-4952
Electrical-Electronic Equipment Panel

016134952
TCR014518-01: RNCC: 3 | RNVC: 2

8 Nov 2012

5975-01-613-4487
Electrical Grounding Plate

016134487
TCR014535-01: RNCC: 3 | RNVC: 2

7 Nov 2012

5975-01-611-4794
Electrical-Electronic Equipment Chassis

016114794
4079103-0501: RNCC: 3 | RNVC: 2

16 Sep 2012

5975-01-605-6386
Electrical Equipment Mounting Base

016056386
ABP-RM-5: RNCC: 3 | RNVC: 2

23 Apr 2012

5975-01-603-2143
Raceway Cover

016032143
40930002: RNCC: 3 | RNVC: 2
40930002: RNCC: 5 | RNVC: 9

24 Feb 2012

5975-01-600-8457
Electrical-Electronic Equipment Chassis

016008457
781368-01: RNCC: 3 | RNVC: 2

21 Dec 2011

5975-01-600-8078
Electrical-Electronic Equipment Chassis

016008078
TCR014012-10: RNCC: 3 | RNVC: 2

20 Dec 2011

5975-01-697-3911
Electrical Components Tie Down Strap

016973911
316-9351: RNCC: 3 | RNVC: 2
316-9351: RNCC: 5 | RNVC: 2

17 Sep 2021

5975-01-697-0486
Electrical Components Tie Down Strap

016970486
326-4516: RNCC: 3 | RNVC: 2

30 Aug 2021

5975-01-595-7472
Cable Marker Sleeve

015957472
3907AS2220-99: RNCC: 3 | RNVC: 2

5 May 2011

5975-01-690-9062
Electrical Components Tie Down Strap

016909062
CTB1X1BKA-C: RNCC: 3 | RNVC: 9
8665845-0: RNCC: 7 | RNVC: 2
8665845 REV X1: RNCC: D | RNVC: 9

9 Sep 2020

5975-01-690-7304
Electrical Tie Down Mounting Base

016907304
CB3019AA5N: RNCC: 3 | RNVC: 2

28 Aug 2020

5975-01-593-2933
Electrical-Electronic Equipment Chassis

015932933
296A191-1: RNCC: 3 | RNVC: 2

6 Apr 2011

5975-01-685-1868
Rigid Metal Conduit Assembly

016851868
C99F34708: RNCC: 3 | RNVC: 2
C99F34708: RNCC: 3 | RNVC: 9

5 Dec 2019

5975-01-681-5543
Junction Box

016815543
CCA332318: RNCC: 3 | RNVC: 2
CCA332318: RNCC: 5 | RNVC: 9

21 Jun 2019

5975-01-678-3213
Electrical-Electronic Equipment Chassis

016783213
576-1015-F10-08: RNCC: 3 | RNVC: 2

31 Jan 2019

5975-01-673-7886
Electrical Equipment Mounting Base

016737886
STK-RACK-DINRAIL=: RNCC: 3 | RNVC: 2

26 Jun 2018

5975-01-583-6058
Electrical Cable Protector

015836058
232A627-1: RNCC: 3 | RNVC: 2

30 Mar 2010

5975-01-581-7286
Electrical-Electronic Equipment Chassis

015817286
8535002-920: RNCC: 3 | RNVC: 2

26 Jan 2010

5975-01-580-2507
Electrical-Electronic Equipment Chassis

015802507
G533441-2: RNCC: 3 | RNVC: 2
G533441-2: RNCC: 5 | RNVC: 2

9 Dec 2009

5975-01-655-4265
Electrical Equipment Rack

016554265
MB453TRAY-2B: RNCC: 3 | RNVC: 9
MB453TRY-B: RNCC: 5 | RNVC: 9

26 May 2016

5975-01-655-3186
Electrical-Electronic Equipment Chassis

016553186
SFR514A: RNCC: 3 | RNVC: 2
2860006: RNCC: D | RNVC: 9

24 May 2016

5975-01-653-7205
Electrical Components Tie Down Strap

016537205
TY27MX-A: RNCC: 3 | RNVC: 2
TY27MX-A: RNCC: 5 | RNVC: 2
TY27MX-A: RNCC: 5 | RNVC: 9

4 Apr 2016

5975-01-653-5263
Electrical-Electronic Equipment Chassis

016535263
70-0389-101: RNCC: 3 | RNVC: 2
70-0389-101: RNCC: 5 | RNVC: 2
70-0389-101: RNCC: 5 | RNVC: 9
70-0389-101: RNCC: 5 | RNVC: 9

27 Mar 2016

5975-01-648-5260
Kvm Assembly

016485260
14021-7026-01: RNCC: 3 | RNVC: 9

28 Sep 2015

5975-01-645-3572
Electronic Equipment Mounting Tray

016453572
004-030032-000: RNCC: 3 | RNVC: 2

12 Jun 2015

5975-01-640-7125
Electrical-Electronic Equipment Panel

016407125
14021-0028-01: RNCC: 3 | RNVC: 1
D14021-0028-MD01: RNCC: 5 | RNVC: 1

18 Dec 2014

5975-01-569-8555
Electrical-Electronic Equipment Chassis

015698555
232A719-9: RNCC: 3 | RNVC: 2

9 Dec 2008

5975-01-569-8553
Electrical-Electronic Equipment Chassis

015698553
232A719-6: RNCC: 3 | RNVC: 2

9 Dec 2008

5975-01-569-8060
Electrical-Electronic Equipment Chassis

015698060
232A719-8: RNCC: 3 | RNVC: 2

9 Dec 2008

5975-01-569-7667
Electrical-Electronic Equipment Chassis

015697667
232A719-10: RNCC: 3 | RNVC: 2

8 Dec 2008

5975-01-568-3010
Junction Box

015683010
13227E6125: RNCC: 3 | RNVC: 2

27 Oct 2008

5975-01-566-3434
Flexible Nonmetallic Conduit

015663434
M1833: RNCC: 3 | RNVC: 2

28 Aug 2008

5975-01-564-9113
Electrical-Electronic Equipment Chassis

015649113
2200214-201: RNCC: 3 | RNVC: 2

2 Jul 2008

5975-01-626-0705
Electrical Equipment Cabinet

016260705
CABINET SE 125 DUAL: RNCC: 3 | RNVC: 9

26 Feb 2014

5975-01-623-2592
Electrical Standardized Components Case

016232592
MA-0055-02: RNCC: 3 | RNVC: 2
MA-0055-02: RNCC: 3 | RNVC: 9

6 Nov 2013

5975-01-560-2656
Electrical-Electronic Equipment Chassis

015602656
110-2821-000-0C: RNCC: 3 | RNVC: 2

23 Jan 2008

5975-01-616-3542
Electrical Equipment Mounting Base

016163542
09022F1061-1: RNCC: 3 | RNVC: 2

11 Feb 2013

5975-01-553-1254
Chassis Base

015531254
64008-1: RNCC: 3 | RNVC: 2
974404A03: RNCC: 5 | RNVC: 2
64008-1: RNCC: 5 | RNVC: 9

9 Jul 2007

5975-01-550-0278
Electrical Equipment Rack

015500278
260A821-1: RNCC: 3 | RNVC: 2

5 Apr 2007

5975-01-550-0259
Electrical Equipment Rack

015500259
260A791-1: RNCC: 3 | RNVC: 2

5 Apr 2007

5975-01-550-0257
Electrical Equipment Rack

015500257
260A811-1: RNCC: 3 | RNVC: 2
260A811: RNCC: D | RNVC: 9

5 Apr 2007

5975-01-549-3186
Electrical Nonmetallic Conduit Assembly

015493186
260A809-6: RNCC: 3 | RNVC: 2
740NC102NFH171H171-21-72: RNCC: 5 | RNVC: 9

16 Mar 2007

5975-01-549-0440
Electrical-Electronic Equipment Chassis

015490440
640-008362-P001: RNCC: 3 | RNVC: 2
14V-38121-R05J12P250C-SN3: RNCC: 5 | RNVC: 2

9 Mar 2007

5975-01-546-4520
Electrical-Electronic Equipment Chassis

015464520
VA-016753-0003: RNCC: 3 | RNVC: 2

15 Dec 2006

5975-01-546-0256
Electrical Grounding Plate

015460256
N-174: RNCC: 3 | RNVC: 2

4 Dec 2006

5975-01-545-0019
Electrical Equipment Mounting Base

015450019
GD32: RNCC: 3 | RNVC: 2

30 Oct 2006

5975-01-585-9555
Electrical Equipment Leg

015859555
SAC4451: RNCC: 3 | RNVC: 9

14 Jun 2010

5975-01-581-6229
Electrical-Electronic Equipment Chassis

015816229
AT-MCR12-4: RNCC: 3 | RNVC: 9

22 Jan 2010

5975-01-575-7604
Electrical-Electronic Equipment Chassis

015757604
1071748: RNCC: 3 | RNVC: 2

14 Jul 2009

5975-01-536-5836
Electrical-Electronic Equipment Chassis

015365836
CTM-100/C: RNCC: 3 | RNVC: 9
244-990305-675: RNCC: 5 | RNVC: 2

9 Jan 2006

5975-01-573-5209
Electrical Equipment Rack Base

015735209
A3266017: RNCC: 3 | RNVC: 2

27 Apr 2009

5975-01-573-3312
Electrical-Electronic Equipment Chassis

015733312
AT8628: RNCC: 3 | RNVC: 2

16 Apr 2009

5975-01-560-3456
Electrical Wall Plate

015603456
S82: RNCC: 3 | RNVC: 2

28 Jan 2008

5975-01-550-9521
Electrical-Electronic Equipment Chassis

015509521
AV3200-001: RNCC: 3 | RNVC: 9
A2000R-AM: RNCC: 5 | RNVC: 9

3 May 2007

5975-01-550-1046
Electrical Equipment Mounting Base

015501046
RMK39: RNCC: 3 | RNVC: 9

9 Apr 2007

5975-01-549-0850
Electrical Components Tie Down Strap

015490850
110-030: RNCC: 3 | RNVC: 9

12 Mar 2007

5975-01-548-2545
Electrical Conduit Elbow

015482545
153-499: RNCC: 3 | RNVC: 9

15 Feb 2007

5975-01-511-3365
Flexible Metal Conduit Assembly

015113365
759-395: RNCC: 3 | RNVC: 2

6 Aug 2003

5975-01-501-0119
Electrical Equipment Mounting Base

015010119
780R164G03: RNCC: 3 | RNVC: 2
780R164G03: RNCC: 3 | RNVC: 2

20 Sep 2002

5975-01-495-3470
Electrical-Electronic Equipment Chassis

014953470
112908-002: RNCC: 3 | RNVC: 2

13 Mar 2002

5975-01-487-4201
Electrical-Electronic Equipment Chassis

014874201
CAE003495: RNCC: 3 | RNVC: 2
CAE003495: RNCC: 5 | RNVC: 2

6 Aug 2001

5975-01-486-0479
Electrical Nonmetallic Conduit Assembly

014860479
23A01845-046: RNCC: 3 | RNVC: 2
740NF102NFH111H251-14-118: RNCC: 5 | RNVC: 2
2046AS072-46: RNCC: 5 | RNVC: 2
2046AS072: RNCC: 7 | RNVC: 1

18 Jun 2001

5975-01-477-1815
Prote Connector Kit

014771815
HCPS-69J: RNCC: 3 | RNVC: 2
HCPS-69J: RNCC: 3 | RNVC: 9
HCPS-69J: RNCC: 5 | RNVC: 9
6317986-021: RNCC: 7 | RNVC: 2

2 Aug 2000

5975-01-477-1813
Prote Connector Kit

014771813
HCPS-109J: RNCC: 3 | RNVC: 2
HCPS-109J: RNCC: 3 | RNVC: 9
6317986-025: RNCC: 7 | RNVC: 2

2 Aug 2000

5975-01-477-1812
Prote Connector Kit

014771812
HCPS-79J: RNCC: 3 | RNVC: 2
HCPS-79J: RNCC: 3 | RNVC: 9
HCPS-79J: RNCC: 5 | RNVC: 9
6317986-022: RNCC: 7 | RNVC: 2

2 Aug 2000

5975-01-477-1814
Prote Connector Kit

014771814
HCPS-99J: RNCC: 3 | RNVC: 2
HCPS-99J: RNCC: 3 | RNVC: 9
HCPS-99J: RNCC: 5 | RNVC: 9
6317986-024: RNCC: 7 | RNVC: 2

2 Aug 2000

5975-01-477-1811
Prote Connector Kit

014771811
HCPS-89J: RNCC: 3 | RNVC: 2
HCPS-89J: RNCC: 3 | RNVC: 9
HCPS-89J: RNCC: 5 | RNVC: 9
6317986-023: RNCC: 7 | RNVC: 2

2 Aug 2000

5975-01-476-1746
Electronic Components Assembly

014761746
119533-0001: RNCC: 3 | RNVC: 2

17 Jun 2014

NSN 5975-01-437-9784 014379784 BUSHING,ELECTRICAL CONDUCTOR

5975-01-437-9784
Electrical Conductor Bushing

014379784
EL64-60: RNCC: 3 | RNVC: 2
1640-1110: RNCC: 5 | RNVC: 2

28 Oct 1996

5975-01-458-8342
Electrical-Electronic Equipment Panel

014588342
G1-50-1000-801: RNCC: 3 | RNVC: 2
G1-50-1000-800: RNCC: 5 | RNVC: 2

11 Sep 1998

5975-01-457-9296
Electrical-Electronic Equipment Chassis

014579296
129020-59: RNCC: 3 | RNVC: 2

7 Aug 1998

5975-01-457-9231
Electrical-Electronic Equipment Chassis

014579231
129020-59A: RNCC: 3 | RNVC: 2

7 Aug 1998

5975-01-457-9070
Electrical-Electronic Equipment Chassis

014579070
129020-59B: RNCC: 3 | RNVC: 2

6 Aug 1998

5975-01-453-4265
Electrical Equipment Mounting Base

014534265
4290362-501: RNCC: 3 | RNVC: 2
4290362-501: RNCC: 5 | RNVC: 2

28 Feb 1998

5975-01-450-7176
Rigid Metal Conduit Assembly

014507176
68A250749-2005: RNCC: 3 | RNVC: 2

19 Nov 1997

5975-01-437-8869
Electrical-Electronic Equipment Chassis

014378869
H405A058-97: RNCC: 3 | RNVC: 2

25 Oct 1996

5975-01-434-6297
Electronic Equipment Mounting Tray

014346297
94247-1: RNCC: 3 | RNVC: 2
94247-1: RNCC: 5 | RNVC: 9

2 Aug 1996

5975-01-371-2403
Electrical-Electronic Equipment Chassis

013712403
A3014092-1: RNCC: 3 | RNVC: 2

9 Feb 1993

5975-01-360-7382
Connector Protection Flange

013607382
TH-3: RNCC: 3 | RNVC: 2
TH-3H: RNCC: 3 | RNVC: 9
TH-3H: RNCC: 5 | RNVC: 9
TH-3H: RNCC: 5 | RNVC: 9
TH-3H: RNCC: 5 | RNVC: 9
TH-3H: RNCC: 5 | RNVC: 9

30 Jun 1992

5975-01-360-7383
Connector Protection Flange

013607383
TH-4G: RNCC: 3 | RNVC: 2
TH-4G: RNCC: 3 | RNVC: 9

30 Jun 1992

5975-01-360-4733
Protection Connector Kit

013604733
7100164380: RNCC: 3 | RNVC: 2
HCPS-74: RNCC: 5 | RNVC: 9
HCPS-74: RNCC: 5 | RNVC: 9
HCPS-74: RNCC: 5 | RNVC: 9

24 Jun 1992

5975-01-360-4732
Protection Connector Kit

013604732
HCPS-84: RNCC: 3 | RNVC: 9
HCPS-84: RNCC: 5 | RNVC: 9
HCPS-84: RNCC: C | RNVC: 1

24 Jun 1992

5975-01-360-4734
Protection Connector Kit

013604734
HCPS-64: RNCC: 3 | RNVC: 2
HCPS-64: RNCC: 3 | RNVC: 9
HCPS-64: RNCC: 5 | RNVC: 9
6317971-011: RNCC: C | RNVC: 1

24 Jun 1992

5975-01-328-8968
Electrical Equipment Mounting Base

013288968
654377-301: RNCC: 3 | RNVC: 2
654377-301: RNCC: 3 | RNVC: 9

9 Nov 1990

5975-01-289-2732
Electrical Equipment Cabinet

012892732
G25319: RNCC: 3 | RNVC: 9
F-22142 PIECE 79: RNCC: 5 | RNVC: 9

20 Nov 1988

5975-01-377-2511
Cable Marker Sleeve

013772511
4100565-8: RNCC: 3 | RNVC: 2

10 Jul 1993

5975-01-281-8820
Flexible Nonmetallic Conduit

012818820
1/4 IN. ASPHALT COAT: RNCC: 3 | RNVC: 2

3 Jul 1988

5975-01-281-0514
Electrical Conduit Adapter

012810514
G62793-20: RNCC: 3 | RNVC: 2
S1776-20: RNCC: 5 | RNVC: 2
K15K0008-7: RNCC: 5 | RNVC: 9

16 Jun 1988

5975-01-279-7594
Electrical Conduit Adapter

012797594
K15K0008-8: RNCC: 3 | RNVC: 2
G62793-22: RNCC: 5 | RNVC: 2
S1776-22: RNCC: 5 | RNVC: 2
K15K0008-8: RNCC: 5 | RNVC: 9
K15K0008: RNCC: 7 | RNVC: 1
K15K0008: RNCC: 7 | RNVC: 9

25 May 1988

5975-01-365-5440
Electrical Conduit Adapter

013655440
7000-715-10-62: RNCC: 3 | RNVC: 2
RP2330-10-05SM: RNCC: 5 | RNVC: 2
RP2330-10-05: RNCC: 5 | RNVC: 2
RP2330-10-05: RNCC: 5 | RNVC: 9

8 Oct 1992

5975-01-262-8522
Electrical Nonmetallic Conduit Assembly

012628522
T-1394: RNCC: 3 | RNVC: 2

4 Sep 1987

5975-01-262-8523
Electrical Nonmetallic Conduit Assembly

012628523
T-1396: RNCC: 3 | RNVC: 2

4 Sep 1987

5975-01-260-0060
Electrical Box Connector

012600060
0080-20-101-15: RNCC: 3 | RNVC: 2

24 Jul 1987

5975-01-255-3913
Flexible Nonmetallic Conduit

012553913
CVC2597-14-288: RNCC: 3 | RNVC: 2

20 May 1987

5975-01-356-9776
Blank Panel

013569776
149D3468P0002: RNCC: 3 | RNVC: 9
149D3468P2: RNCC: 5 | RNVC: 9

15 Apr 1992

5975-01-251-9186
Stuffing Tube

012519186
ASI 202 ITEM 8 6IN: RNCC: 3 | RNVC: 2

26 Mar 1987

5975-01-246-7136
Cable Terminal Chamber

012467136
7729343-30: RNCC: 3 | RNVC: 9
7729343-30: RNCC: 5 | RNVC: 2
7729343-10: RNCC: 5 | RNVC: 9
7729343-10: RNCC: 5 | RNVC: 9
7729343-30: RNCC: C | RNVC: 1

18 Dec 1986

5975-01-350-5658
Electrical Conduit Adapter

013505658
G63163: RNCC: 3 | RNVC: 2
10013: RNCC: 3 | RNVC: 2
187818-FB6200: RNCC: 3 | RNVC: 2
10252146-1: RNCC: 7 | RNVC: 2

18 Dec 1991

5975-01-241-2148
Electrical Conduit Adapter

012412148
RP2100-EM08-T: RNCC: 3 | RNVC: 2
RP2100-G08-T: RNCC: 3 | RNVC: 2
302-5563030 ITEM 15: RNCC: 5 | RNVC: 1
RP2100-F08-T: RNCC: 5 | RNVC: 2
RP2100-EM08-T: RNCC: 5 | RNVC: 9
RP2100-F08-T: RNCC: 5 | RNVC: 9

23 Sep 1986

5975-01-231-3546
Electrical Tie Down Mounting Base

012313546
FCPI1-C20: RNCC: 3 | RNVC: 2
717625-1: RNCC: 5 | RNVC: 2

25 Apr 1986

5975-01-222-0543
Strain Relief Clamp

012220543
223-100012: RNCC: 1 | RNVC: 2
3504-1: RNCC: 3 | RNVC: 9
223-100012-001: RNCC: 5 | RNVC: 9
3504-1: RNCC: 5 | RNVC: 9

6 Dec 1985

5975-01-333-3085
Electrical-Electronic Equipment Panel

013333085
3262-7721: RNCC: 3 | RNVC: 2
3262-7721: RNCC: 5 | RNVC: 9

30 Jan 1991

5975-01-210-8076
Electrical Nonmetallic Conduit Assembly

012108076
R58HB09C33W020: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

18 Jun 1985

5975-01-202-1179
Electrical Equipment Mounting Base

012021179
E5-15-4675: RNCC: 3 | RNVC: 2
E5-15-4675: RNCC: 5 | RNVC: 9

27 Feb 1985

5975-01-317-9668
Electrical Equipment Cabinet

013179668
3591-6469: RNCC: 3 | RNVC: 2
FA10226: RNCC: 5 | RNVC: 2
3591-6469: RNCC: 5 | RNVC: 9
FA10226: RNCC: 5 | RNVC: 9

9 Apr 1990

NSN 5975-01-196-3502 011963502 STRAP,TIE DOWN,ELECTRICAL COMPONENTS

5975-01-196-3502
Electrical Components Tie Down Strap

011963502
TY25MZYT103: RNCC: 3 | RNVC: 2

11 Dec 1984

5975-01-191-5213
Stuffing Tube

011915213
249-BLACK: RNCC: 3 | RNVC: 9

10 Oct 1984

5975-01-180-6836
Electrical-Electronic Equipment Panel

011806836
13079478: RNCC: 3 | RNVC: 2
13079478: RNCC: 5 | RNVC: 9

31 May 1984

5975-01-302-8290
Flexible Metal Conduit Assembly

013028290
750-011NF12-57: RNCC: 3 | RNVC: 2
200205-DI0570: RNCC: 3 | RNVC: 2
10250675-50: RNCC: 7 | RNVC: 2

21 Jun 1989

5975-01-165-8855
Flexible Nonmetallic Conduit

011658855
94422004: RNCC: 3 | RNVC: 2
7807: RNCC: 5 | RNVC: 9

4 Nov 1983

5975-01-276-6790
Blank Panel

012766790
6510714-1: RNCC: 3 | RNVC: 2

12 Apr 1988

5975-01-141-6887
Electrical Tote Box

011416887
4425: RNCC: 3 | RNVC: 9
4425: RNCC: 5 | RNVC: 9
4425: RNCC: 5 | RNVC: 9
98-0798-0323-9: RNCC: 5 | RNVC: 9
98-0798-0323-9: RNCC: 5 | RNVC: 9

3 Nov 1982

5975-01-141-6883
Electrical Box Divider

011416883
4307: RNCC: 3 | RNVC: 9
98-0798-0313-0: RNCC: 5 | RNVC: 9
98-0798-0313-0: RNCC: 5 | RNVC: 9
4307: RNCC: 5 | RNVC: 9
4307: RNCC: 5 | RNVC: 9

3 Nov 1982

5975-01-141-6882
Electrical Box Divider

011416882
4306: RNCC: 3 | RNVC: 2
4306: RNCC: 3 | RNVC: 9
4306: RNCC: 5 | RNVC: 9
98-0798-0312-2: RNCC: 5 | RNVC: 9

3 Nov 1982

5975-01-141-2828
Electrical Equipment Cabinet

011412828
308383-1: RNCC: 3 | RNVC: 2

26 Oct 1982

5975-01-273-5966
Electrical Conduit Coupling

012735966
3511AC: RNCC: 3 | RNVC: 2
34711: RNCC: 5 | RNVC: 2

27 Feb 1988

5975-01-132-1664
Cable Marker Sleeve

011321664
GS830FB06-01: RNCC: 3 | RNVC: 2

24 May 1982

5975-01-127-2548
Flexible Nonmetallic Conduit

011272548
74A885630-1015: RNCC: 3 | RNVC: 2
74A88563C-1015: RNCC: 5 | RNVC: 2
74A885630-1015: RNCC: 5 | RNVC: 2

27 Feb 1982

5975-01-124-2228
Electrical Components Tie Down Strap

011242228
10S300-1-52: RNCC: 3 | RNVC: 9
10S300-1-52: RNCC: C | RNVC: 1

28 Dec 1981

5975-01-124-2214
Electrical Components Tie Down Strap

011242214
10S300-2-1: RNCC: 3 | RNVC: 9
10S300-2-1: RNCC: C | RNVC: 1

28 Dec 1981

5975-01-124-2215
Electrical Components Tie Down Strap

011242215
10S300-2-154: RNCC: 3 | RNVC: 9
10S300-2-154: RNCC: C | RNVC: 1

28 Dec 1981

5975-01-122-9272
Electrical Components Tie Down Strap

011229272
10S300-2-55: RNCC: 3 | RNVC: 9
10S300-2-55: RNCC: C | RNVC: 1

2 Dec 1981

5975-01-122-9261
Electrical Components Tie Down Strap

011229261
10S300-2-14: RNCC: 3 | RNVC: 9
10S300-2-14: RNCC: C | RNVC: 1

2 Dec 1981

5975-01-122-9262
Electrical Components Tie Down Strap

011229262
10S300-2-15: RNCC: 3 | RNVC: 9
10S300-2-15: RNCC: C | RNVC: 1

2 Dec 1981

5975-01-245-7723
Electrical Conduit Adapter

012457723
150315: RNCC: 3 | RNVC: 2

4 Dec 1986

5975-01-098-5238
Junction Box

010985238
74-35048-001: RNCC: 3 | RNVC: 2
J-3636A: RNCC: 5 | RNVC: 1

4 Aug 1980

5975-01-094-5237
Electrical Tie Down Mounting Base

010945237
FCBI1-S10-C20: RNCC: 3 | RNVC: 2
7558653-01: RNCC: 5 | RNVC: 9

10 May 1980

5975-01-087-7587
Electrical Equipment Drawer

010877587
908D726G03: RNCC: 3 | RNVC: 1
908D726G03TR: RNCC: 5 | RNVC: 2
908D726G03: RNCC: 5 | RNVC: 9

25 Dec 1979

5975-01-087-7586
Electrical Equipment Drawer

010877586
908D725G03: RNCC: 3 | RNVC: 1
908D725G03TR: RNCC: 5 | RNVC: 2
908D725G03: RNCC: 5 | RNVC: 9

25 Dec 1979

5975-01-206-6316
Electrical Equipment Mounting Base

012066316
759R369G01: RNCC: 3 | RNVC: 2
MT-6333/APQ-164: RNCC: 5 | RNVC: 9
400-11678-10: RNCC: 5 | RNVC: 9
694R949G01: RNCC: 5 | RNVC: 9
754R276G01: RNCC: 5 | RNVC: 9
400-11678: RNCC: D | RNVC: 9

20 Apr 1985

5975-01-188-5200
Electrical Equipment Cabinet

011885200
44D0552: RNCC: 3 | RNVC: 2
44D0552: RNCC: 3 | RNVC: 9

5 Sep 1984

5975-01-185-8879
Support Bracket

011858879
406-075-126-101: RNCC: 3 | RNVC: 2

5 Aug 1984

5975-01-016-2496
Stuffing Tube

010162496
275-001-L02-2206: RNCC: 3 | RNVC: 9
M24235/9-127: RNCC: 4 | RNVC: 1
MIL-S-24235/9: RNCC: 4 | RNVC: 1
275-001-L02-2147: RNCC: 5 | RNVC: 9

7 Feb 1976

5975-01-149-6626
Rigid Metal Conduit Assembly

011496626
65610-02050-041: RNCC: 3 | RNVC: 2

23 Mar 1983

5975-01-136-8861
Cable Terminal Chamber

011368861
11462120: RNCC: 3 | RNVC: 2
11462120: RNCC: 5 | RNVC: 1
11462120: RNCC: 5 | RNVC: 9

17 Aug 1982

5975-01-134-2264
Cover Panel

011342264
145E3118-5: RNCC: 3 | RNVC: 2

2 Jul 1982

5975-00-935-2286
Conduit Outlet Cover

009352286
S322GSA: RNCC: 3 | RNVC: 2
S322SA: RNCC: 5 | RNVC: 9

28 Aug 1968

5975-00-909-2053
Spacer Tape

009092053
7100017387: RNCC: 3 | RNVC: 2
P-3: RNCC: 3 | RNVC: 2
P3SPACER: RNCC: 5 | RNVC: 9
5975009092053: RNCC: 5 | RNVC: 9
P3SPACER: RNCC: 5 | RNVC: 9
P-3: RNCC: 5 | RNVC: 9
P-3: RNCC: 5 | RNVC: 9
5975009092053: RNCC: 6 | RNVC: 9

1 Jan 1960

5975-00-769-3925
Insulator Pin

007693925
J203A: RNCC: 3 | RNVC: 2
J203A: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-873-9048
Electrical Box Connector

008739048
GC5006: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-649-8633
Electrical Box Connector

006498633
8763341-1: RNCC: 1 | RNVC: 2
4317-A: RNCC: 3 | RNVC: 2
DB-6-A: RNCC: 3 | RNVC: 2
7031633P1: RNCC: 5 | RNVC: 2
8763341-1: RNCC: 5 | RNVC: 2
8763341-1: RNCC: 5 | RNVC: 2
5975006498633: RNCC: 5 | RNVC: 9
5975006498633: RNCC: 6 | RNVC: 9

1 Jan 1963

5975-00-295-9864
Interior Cable Rack

002959864
0020030630: RNCC: 3 | RNVC: 2
P420634: RNCC: 5 | RNVC: 2
2003-6: RNCC: 5 | RNVC: 9
CR116: RNCC: 5 | RNVC: 9
P420634: RNCC: 5 | RNVC: 9
P420634: RNCC: 5 | RNVC: 9
P420634: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-252-6416
Wiring Harness Sealing Fitting

002526416
LS10277-1: RNCC: 3 | RNVC: 2

18 Jun 1973

5975-01-686-6916
Electrical Equipment Mounting Base

016866916
4101AS0150-1: RNCC: 3 | RNVC: 2
4101AS0150: RNCC: D | RNVC: 9

28 Feb 2020

5975-99-435-9250
Line Supporti Strap

5975-12-306-5075
Flexible Nonmetallic Conduit

123065075
1601296GRAU: RNCC: 3 | RNVC: 2
2030101029: RNCC: 3 | RNVC: 2
61721750: RNCC: 3 | RNVC: 2
167-11298: RNCC: 3 | RNVC: 2
1069636: RNCC: 5 | RNVC: 2
NS29: RNCC: 5 | RNVC: 2
2030.101.029: RNCC: 5 | RNVC: 9

6 Mar 1986

5975-01-686-6096
Mounting Plate

016866096
4353866: RNCC: 3 | RNVC: 2

25 Feb 2020

5975-01-677-6855
Fan Assembly

016776855
1775-25-2980-01: RNCC: 3 | RNVC: 2

28 Dec 2018

5975-01-665-3882
Electrical Conduit Tee

016653882
506-MCM7513K81: RNCC: 3 | RNVC: 2

27 Jul 2017

5975-01-678-5599
Tray Module Fan

016785599
8479877-2: RNCC: 1 | RNVC: 2
UFT-1440-C06: RNCC: 3 | RNVC: 2
8479877-2: RNCC: 3 | RNVC: 2

13 Feb 2019

5975-01-595-5665
Electrical-Electronic Equipment Panel

015955665
8436899-1: RNCC: 3 | RNVC: 2

2 May 2011

5975-01-602-7830
Electrical-Electronic Equipment Panel

016027830
4V10474-101A: RNCC: 3 | RNVC: 2

6 Feb 2012

5975-01-555-9151
Electrical Equipment Rack

015559151
M-27002-1: RNCC: 3 | RNVC: 2

18 Sep 2007

5975-01-596-5446
Electrical Equipment Rack

015965446
03002A1118-1: RNCC: 3 | RNVC: 2
02-15732: RNCC: 5 | RNVC: 2

19 May 2011

5975-01-556-9357
Junction Box Assembly

015569357
482-7067865-A7: RNCC: 3 | RNVC: 2
H689-1703-A7: RNCC: 5 | RNVC: 1

9 Oct 2007

5975-01-568-1263
Rigid Metal Conduit

015681263
136C477G01: RNCC: 3 | RNVC: 2
136C477G01: RNCC: 3 | RNVC: 9
136C477G01: RNCC: 5 | RNVC: 9

21 Oct 2008

5975-01-605-8727
Electrical Equipment Mounting Base

016058727
901-060-335-104: RNCC: 3 | RNVC: 2

27 Apr 2012

5975-01-566-7385
Interconnecting Box

015667385
74R730025-1003: RNCC: 3 | RNVC: 2

9 Sep 2008

5975-01-618-6237
Junction Box Assembly

016186237
123AV60653-1: RNCC: 3 | RNVC: 9
123AV60653-1: RNCC: 5 | RNVC: 1
123AV60653-1: RNCC: C | RNVC: 1

30 Apr 2013

5975-01-579-7451
Electrical Equipment Leg

015797451
SP-000064: RNCC: 3 | RNVC: 2
SP-000064: RNCC: 5 | RNVC: 2
038251-01: RNCC: 5 | RNVC: 9
07011B3500: RNCC: 7 | RNVC: 2

23 Nov 2009

5975-01-610-0004
Flexible Metal Conduit Assembly

016100004
3260AS1328-12: RNCC: 3 | RNVC: 2

7 Aug 2012

5975-01-496-9016
Cable Collar

014969016
2916888-4: RNCC: 3 | RNVC: 2
2916888-4: RNCC: 5 | RNVC: 2
2916888-4: RNCC: 5 | RNVC: 9

1 May 2002

5975-01-504-5730
Electrical Standardized Components Case Section

015045730
5186605-1: RNCC: 3 | RNVC: 2
5186605-1: RNCC: 5 | RNVC: 9

3 Feb 2003

5975-01-504-2549
Electrical Fitting Mounting Base

015042549
4098-9792: RNCC: 3 | RNVC: 2
401-7528488-ITEM-7: RNCC: 5 | RNVC: 1
401-7528488: RNCC: D | RNVC: 9

23 Jan 2003

5975-01-530-2748
Transiion

015302748
12273148-210: RNCC: 3 | RNVC: 2
12273148-210: RNCC: 5 | RNVC: 2
D,12273148-210: RNCC: 5 | RNVC: 9

19 May 2005

5975-01-503-9451
Electrical Components Tie Down Strap

015039451
T50L9M4: RNCC: 3 | RNVC: 2

14 Jan 2003

5975-01-532-5412
Rigid Metal Conduit

015325412
11477605: RNCC: 3 | RNVC: 2

11 Aug 2005

5975-01-500-1930
Electrical Grounding Plate

015001930
5043994-4: RNCC: 3 | RNVC: 9
5043994: RNCC: D | RNVC: 9

16 Aug 2002

5975-01-368-6742
Cable Hanger

013686742
STRP-016: RNCC: 3 | RNVC: 2

6 Dec 1992

5975-01-485-3616
Electrical Equipment Mounting Base

014853616
889498-1: RNCC: 3 | RNVC: 2
RAM-101U-M: RNCC: 5 | RNVC: 1
889498-1: RNCC: 5 | RNVC: 2
889498-1: RNCC: 5 | RNVC: 2
RAM-D-111-MIU: RNCC: 5 | RNVC: 9
RAM 101U-M: RNCC: 5 | RNVC: 9
889498: RNCC: D | RNVC: 9

23 May 2001

5975-01-490-9843
Electrical Conduit Adapter

014909843
4D09274-001: RNCC: 3 | RNVC: 2
6510E64: RNCC: D | RNVC: 9

9 Oct 2001

5975-01-342-9566
Electrical-Electronic Equipment Chassis

013429566
46-0851-13: RNCC: 3 | RNVC: 2

2 Aug 1991

5975-01-464-4282
Special Purpose Ele

014644282
737505-1: RNCC: 3 | RNVC: 2
737505-1: RNCC: 3 | RNVC: 9

29 Apr 1999

5975-01-473-2767
Electrical Cable Protector

014732767
195A050-1: RNCC: 3 | RNVC: 2
195A050: RNCC: D | RNVC: 9

3 Apr 2000

5975-01-483-4483
Junction Box Assembly

014834483
482-7067865-A1: RNCC: 3 | RNVC: 2
H6891703-A1: RNCC: 5 | RNVC: 2
7067865: RNCC: D | RNVC: 9

29 Mar 2001

5975-01-365-9585
Electrical-Electronic Equipment Chassis

013659585
1348AS130: RNCC: 3 | RNVC: 2
1348AS130: RNCC: 5 | RNVC: 2
1348AS130: RNCC: 5 | RNVC: 2
1348AS130: RNCC: 5 | RNVC: 2

19 Oct 1992

5975-01-324-0352
Strain Electrical Conductor Clamp

013240352
141C960G01: RNCC: 3 | RNVC: 2
141C960G01: RNCC: 3 | RNVC: 9
141C960G01: RNCC: 5 | RNVC: 2

8 Aug 1990

5975-01-400-3408
Junction Box

014003408
20-75-WM2-115AITEM1: RNCC: 3 | RNVC: 2

14 Dec 1994

5975-01-343-1235
Junction Box

013431235
KS27294: RNCC: 3 | RNVC: 2
KS27294: RNCC: 5 | RNVC: 9

6 Aug 1991

5975-01-363-9998
Electrical Equipment Mounting Base

013639998
4745: RNCC: 3 | RNVC: 2

11 Sep 1992

5975-01-371-9176
Rigid Metal Conduit Assembly

013719176
S81915B13CGM15: RNCC: 3 | RNVC: 2
5224209-34: RNCC: 5 | RNVC: 2
71434-34: RNCC: 5 | RNVC: 9
5224209-34: RNCC: 7 | RNVC: 2

25 Feb 1993

5975-01-462-7318
Stuffing Tube

014627318
1990.6 SIZE F TYPE 67: RNCC: 3 | RNVC: 2
9000S620274269-146: RNCC: 5 | RNVC: 1
9000S620274269: RNCC: D | RNVC: 9

16 Feb 1999

5975-01-472-0157
Strain Electrical Conductor Clamp

014720157
30-302-1D03G09: RNCC: 3 | RNVC: 2
30-302-1D03G09: RNCC: 3 | RNVC: 2
30-302-1D03G09: RNCC: 3 | RNVC: 2
30-302-1D03G09: RNCC: 3 | RNVC: 2
30-302-1D03G09: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-189-5880
Electrical Conduit Coupling

011895880
LD482-0065-0005: RNCC: 3 | RNVC: 2

17 Sep 1984

5975-01-304-7128
Electrical-Electronic Equipment Panel

013047128
NMPP02: RNCC: 3 | RNVC: 2

26 Jul 1989

5975-01-227-4041
Ground Rod

012274041
342C280H06: RNCC: 3 | RNVC: 2
342C280H06: RNCC: 3 | RNVC: 9
342C280H06: RNCC: 5 | RNVC: 2
34C280H06: RNCC: 5 | RNVC: 9

3 Mar 1986

5975-01-303-8235
Electrical-Electronic Equipment Panel

013038235
TI 81001-1: RNCC: 3 | RNVC: 2
TI 715823-4: RNCC: 5 | RNVC: 2
715823-4: RNCC: 5 | RNVC: 9

7 Jul 1989

5975-01-278-9821
Junction Box

012789821
M24142/10-001: RNCC: 2 | RNVC: 2
MIL-E-24142/10: RNCC: 4 | RNVC: 1

12 May 1988

5975-01-299-7050
Flexible Nonmetallic Conduit

012997050
SAE-AS81914/4: RNCC: 3 | RNVC: 1
M81914/4-1110: RNCC: 3 | RNVC: 2
M81914/4-1110: RNCC: 5 | RNVC: 9

4 May 1989

5975-01-220-7134
Electronic Junction Rack

012207134
62501-10: RNCC: 3 | RNVC: 2

17 Nov 1985

5975-01-260-7182
Rigid Metal Conduit Assembly

012607182
4G52430-101A: RNCC: 3 | RNVC: 9

4 Aug 1987

5975-01-181-9645
Cable Clamp Assy Rh

011819645
150389-1: RNCC: 3 | RNVC: 2

19 Jun 1984

5975-01-133-9855
Electrical-Electronic Equipment Chassis

011339855
930648-805: RNCC: 3 | RNVC: 2

24 Jun 1982

5975-01-173-2207
Electrical Conduit Elbow

011732207
G8619-207B: RNCC: 3 | RNVC: 2
G5603-207B: RNCC: 5 | RNVC: 9

3 Mar 1984

5975-01-139-0121
Electrical-Electronic Equipment Chassis

011390121
800RHW01-01-3: RNCC: 3 | RNVC: 2

22 Sep 1982

5975-00-935-9617
Electrical Equipment Mounting Base

009359617
MS91404S2: RNCC: 2 | RNVC: 2
MIL-C-172: RNCC: 4 | RNVC: 1
BL-1102: RNCC: 5 | RNVC: 1
1231-2: RNCC: 5 | RNVC: 1
TOLA-S2-A5: RNCC: 5 | RNVC: 1
1206-2: RNCC: 5 | RNVC: 9
325-8: RNCC: 5 | RNVC: 9

20 Aug 1969

5975-27-019-4760
Junction Box

270194760
10091DB1066: RNCC: 2 | RNVC: 1
DA0027095: RNCC: 2 | RNVC: 1

15 Nov 2003

5975-27-019-4050
Junction Box

270194050
10091MB0191: RNCC: 2 | RNVC: 1

15 Nov 2003

5975-27-044-4092
Junction Box

270444092
81.25433-0022: RNCC: 2 | RNVC: 1

3 Feb 2009

5975-27-046-0350
Junction Box

270460350
8X8-6: RNCC: 2 | RNVC: 1

30 Jun 2009

5975-27-021-0837
Junction Box

270210837
05001HB0171: RNCC: 2 | RNVC: 1

15 Dec 2003

5975-27-034-0726
Junction Box

270340726
60X35X15 MM: RNCC: 5 | RNVC: 9

8 Dec 2006

5975-27-017-6996
Junction Box

270176996
H-39-4866-50: RNCC: 2 | RNVC: 1

20 Aug 2003

5975-27-037-5801
Junction Box

270375801
742-81: RNCC: 5 | RNVC: 9

8 Aug 2007

5975-27-020-3818
Junction Box

270203818
KOFRA,30X40X22: RNCC: 2 | RNVC: 1
KOFRA, 30X40X22: RNCC: 5 | RNVC: 2

4 Dec 2003

5975-27-018-0019
Junction Box

270180019
13001DB0179: RNCC: 2 | RNVC: 1
3470-737-0600: RNCC: 2 | RNVC: 1

22 Oct 2003

5975-27-034-4778
Junction Box

270344778
2YOLLU: RNCC: 2 | RNVC: 1

11 Jan 2007

5975-01-346-2549
Unique Supply Support Request

013462549
126-2635-010: RNCC: 3 | RNVC: 9
1185: RNCC: C | RNVC: 1

1 Oct 1991

5975-27-021-5077
Junction Box

270215077
05001HA0068: RNCC: 2 | RNVC: 1

15 Dec 2003

5975-27-027-9981
Junction Box

270279981
E89125: RNCC: 5 | RNVC: 9

23 Nov 2005

5975-27-018-0790
Junction Box

270180790
07001YB0058: RNCC: 2 | RNVC: 1

30 Oct 2003

5975-27-044-7123
Junction Box

270447123
DA0187333: RNCC: 2 | RNVC: 1

6 Mar 2009

5975-27-040-8985
Junction Box

270408985
BIB-506: RNCC: 5 | RNVC: 9

7 Apr 2008

5975-14-524-1853
Interconnecting Box

145241853
13813: RNCC: 3 | RNVC: 2

7 Mar 2001

5975-14-398-0865
Stuffing Tube

143980865
NO PRIMARY REF14-398-0865: RNCC: 3 | RNVC: 2
BV1AG5: RNCC: 5 | RNVC: 9

31 Jan 1985

5975-14-405-1038
Cable Marker Sleeve

144051038
036200090013: RNCC: 3 | RNVC: 2
T286-426: RNCC: 5 | RNVC: 2
3597470047835: RNCC: 5 | RNVC: 2
362009-05REP3: RNCC: 5 | RNVC: 2
362009REP3: RNCC: 5 | RNVC: 2
M160RANGEREP3: RNCC: 5 | RNVC: 2

20 Nov 1985

5975-14-425-1800
Stuffing Tube

144251800
632901-00: RNCC: 3 | RNVC: 2
1509T: RNCC: 5 | RNVC: 2
632901: RNCC: 5 | RNVC: 2

24 Jun 1988

5975-27-025-3264
Cable Collar

270253264
5340-ATF-0143: RNCC: 2 | RNVC: 1

24 Feb 2005

5975-14-448-9398
Interconnecting Box

144489398
81000514: RNCC: 3 | RNVC: 2

24 Jul 1991

5975-14-402-4093
Cable Marker Sleeve

144024093
01PR0TMS4W3-32E: RNCC: 1 | RNVC: 2
TMSNR501NR13U9: RNCC: 3 | RNVC: 2
HC024WE4DSU: RNCC: 5 | RNVC: 2
TMSNR501NR13U9: RNCC: 5 | RNVC: 9
TMSSCE3-32-2-0S3-9: RNCC: 5 | RNVC: 9

3 Jul 1985

5975-14-386-5007
Cable Marker Sleeve

143865007
320-062-001-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5975-14-383-3398
Cable Marker Sleeve

143833398
78-15CXZ11S30LAB141JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ11S30JLAB141: RNCC: 5 | RNVC: 2
78-15CXZ11S30LAB141J: RNCC: 5 | RNVC: 2

11 Apr 1983

5975-27-046-3198
Junction Box Cover

270463198
44-0022: RNCC: 2 | RNVC: 1

29 Jul 2009

5975-14-439-3239
Cable Marker Sleeve

144393239
D51900-164: RNCC: 3 | RNVC: 2

25 Apr 1990

5975-14-499-4346
Cable Marker Sleeve

144994346
5600023-060244-000-0-10: RNCC: 3 | RNVC: 2
5600023-060244.000.0-10: RNCC: 5 | RNVC: 2
F300 0T 022 0884: RNCC: 6 | RNVC: 9

29 Oct 1997

5975-14-270-9113
Cable Marker Sleeve

142709113
204337-1391A: RNCC: 3 | RNVC: 2
7815CXZ11S30KD1391AJ: RNCC: 5 | RNVC: 9

1 Jan 1970

5975-14-551-3924
Blank Panel

145513924
955120-208DGJ: RNCC: 3 | RNVC: 2

15 Sep 2006

5975-14-330-6680
Cable Marker Sleeve

143306680
120875A: RNCC: 3 | RNVC: 2
120875: RNCC: 5 | RNVC: 9
85-688-3868: RNCC: 6 | RNVC: 9

2 Jul 1975

5975-14-201-4868
Stuffing Tube

142014868
1006: RNCC: 3 | RNVC: 2
500500: RNCC: 3 | RNVC: 2
1401-500500: RNCC: 5 | RNVC: 2
5005: RNCC: 5 | RNVC: 2
99011337: RNCC: 5 | RNVC: 2
50050: RNCC: 5 | RNVC: 2
99011337: RNCC: 5 | RNVC: 2
BV5MARINEC: RNCC: 5 | RNVC: 2
91220506: RNCC: 5 | RNVC: 2
91220506: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-14-278-3589
Rigid Metal Conduit

142783589
160-79221-02: RNCC: 3 | RNVC: 2

1 Jan 1971

5975-14-339-4456
Cable Marker Sleeve

143394456
SLP15-10J0RTNR: RNCC: 3 | RNVC: 2
620-849-045-0: RNCC: 5 | RNVC: 2
620-849-045-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-373-8534
Interior Cable Rack

143738534
BRT0108-147: RNCC: 3 | RNVC: 2
BRD108-147: RNCC: 5 | RNVC: 2
BRT0108-147: RNCC: 5 | RNVC: 2

13 Nov 1981

5975-14-467-4013
Metallic Raceway

144674013
TELEX30X13X1,2AG3: RNCC: 3 | RNVC: 2
A551-30X13ALU: RNCC: 5 | RNVC: 2

12 Jan 1994

5975-14-550-1409
Cable Hanger

145501409
332A67-1480-20: RNCC: 3 | RNVC: 2

2 Jun 2006

5975-14-330-1700
Junction Box

143301700
A0256-0002F12: RNCC: 3 | RNVC: 2
A0256-002CF12: RNCC: 5 | RNVC: 2

2 Jul 1975

5975-14-446-0722
Interconnecting Box

144460722
20852485: RNCC: 3 | RNVC: 2
20852485: RNCC: 3 | RNVC: 9
BA-608A: RNCC: 6 | RNVC: 9

6 Mar 1991

5975-14-314-3760
Cable Marker Sleeve

143143760
362006-02REP6: RNCC: 3 | RNVC: 2
H060-4BU6: RNCC: 3 | RNVC: 2
M40BLEUREP6: RNCC: 5 | RNVC: 2
H060-6BU6: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-484-2622
Cable Marker Sleeve

144842622
620-867-457-0: RNCC: 3 | RNVC: 2

31 Oct 1996

5975-14-435-9384
Conduit Outlet

144359384
83057: RNCC: 3 | RNVC: 2
200-8696: RNCC: 5 | RNVC: 2
5312057: RNCC: 5 | RNVC: 9
LG83057: RNCC: 5 | RNVC: 9

29 Nov 1989

5975-14-343-4762
Junction Box Cover

143434762
EA1M601-20-810N1: RNCC: 3 | RNVC: 2
EA1M601-20-810: RNCC: 5 | RNVC: 2

16 Jun 1977

5975-14-489-4072
Cable Marker Sleeve

144894072
620-848-161-0: RNCC: 3 | RNVC: 2

16 Jul 1997

5975-15-000-9256
Blank Panel

150009256
GF-BOX-503/TP: RNCC: 3 | RNVC: 2

29 Apr 2013

5975-14-350-1435
Stuffing Tube

143501435
5975CABVL5: RNCC: 2 | RNVC: 2
539500: RNCC: 3 | RNVC: 2
53950: RNCC: 5 | RNVC: 2
5975CA-BVL5: RNCC: 5 | RNVC: 2
BVL5NU: RNCC: 5 | RNVC: 9
823DBVL5NU: RNCC: 5 | RNVC: 9

14 Jun 1978

5975-27-043-9277
Cable Marker Sleeve

270439277
TMS-SCE-1K-3/8-2.0-4: RNCC: 2 | RNVC: 1

23 Dec 2008

5975-14-366-9900
Cable Marker Sleeve

143669900
9742-297: RNCC: 3 | RNVC: 2

11 Dec 1980

5975-14-446-1396
Junction Box

144461396
1776B62-03: RNCC: 3 | RNVC: 2
89467745: RNCC: 5 | RNVC: 2

6 Mar 1991

5975-14-471-3402
Stuffing Tube

144713402
242503: RNCC: 3 | RNVC: 2
2006-242503: RNCC: 5 | RNVC: 2

24 Aug 1994

5975-15-111-3083
Blank Panel

151113083
173-0356/01: RNCC: 3 | RNVC: 2

16 Nov 1990

5975-14-469-7936
Interconnecting Box

144697936
42-0107: RNCC: 3 | RNVC: 2

10 May 1994

5975-14-380-2993
Cable Marker Sleeve

143802993
D51900-23: RNCC: 3 | RNVC: 2
D51900-23: RNCC: 5 | RNVC: 2

8 Nov 1982

5975-14-310-6362
Cable Marker Sleeve

143106362
H50-35JOK216: RNCC: 3 | RNVC: 2
N50-35JAUNEK216: RNCC: 5 | RNVC: 2
N50-35JOK216: RNCC: 5 | RNVC: 2
H50-35J0K216: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-14-475-5386
Interconnecting Box

144755386
815-2-71-100: RNCC: 3 | RNVC: 2

12 Apr 1995

5975-14-266-5533
Junction Box

142665533
SP857: RNCC: 3 | RNVC: 2
AAI001044000001: RNCC: 3 | RNVC: 2
85-670-7690: RNCC: 6 | RNVC: 9
BJ-208A: RNCC: 6 | RNVC: 9

1 Jan 1970

5975-14-405-0567
Conduit Outlet

144050567
31325: RNCC: 3 | RNVC: 2
LG31325: RNCC: 5 | RNVC: 2
5313559: RNCC: 5 | RNVC: 2
313-25: RNCC: 5 | RNVC: 2

20 Nov 1985

5975-14-368-5626
Cable Marker Sleeve

143685626
036200050011: RNCC: 3 | RNVC: 2
3597470045572: RNCC: 5 | RNVC: 2
362005-06REP1: RNCC: 5 | RNVC: 2
T286-454: RNCC: 5 | RNVC: 2
362005REP1: RNCC: 5 | RNVC: 2
M37MARR0NREP1: RNCC: 5 | RNVC: 2
H050-6MA1: RNCC: 5 | RNVC: 9

20 Feb 1981

5975-14-226-8506
Junction Box

142268506
11-000-115: RNCC: 3 | RNVC: 2

1 Jan 1966

5975-14-389-4929
Junction Box

143894929
365A63-3034-00: RNCC: 3 | RNVC: 2

20 Dec 1983

5975-14-339-4448
Cable Marker Sleeve

143394448
SLP15-10J0RJNR: RNCC: 3 | RNVC: 2
620-849-035-0: RNCC: 5 | RNVC: 2
620-849-035-0: RNCC: 5 | RNVC: 2

18 Jan 1977

5975-14-517-7331
Cable Marker Sleeve

145177331
320-314-701-0: RNCC: 3 | RNVC: 2

5 Jan 2000

5975-14-466-0704
Cable Marker Sleeve

144660704
PR180-48302: RNCC: 3 | RNVC: 2

27 Oct 1993

5975-14-383-3393
Cable Marker Sleeve

143833393
78-15CXZ5S30P35R0UGE: RNCC: 3 | RNVC: 2
78-15CXZ5S30RP35: RNCC: 5 | RNVC: 2
78-15CXZ5S30P35R: RNCC: 5 | RNVC: 2

11 Apr 1983

5975-27-048-4752
Cable Spacer

270484752
6040-4040-0017: RNCC: 2 | RNVC: 1

11 Feb 2010

5975-14-416-6824
Interior Cable Rack

144166824
412802100001: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-494-3568
Cable Marker Sleeve

144943568
TMS 1/2-26MM WHITE: RNCC: 3 | RNVC: 2
TMS 1-2-26MM WHITE: RNCC: 5 | RNVC: 2
TMS1-2-26MMWHITE: RNCC: 5 | RNVC: 2
F300 0T 017 0992: RNCC: 6 | RNVC: 9
F300 0T 022 8972: RNCC: 6 | RNVC: 9

15 Oct 1997

5975-14-537-2608
Ground Rod

145372608
1300034475: RNCC: 3 | RNVC: 2
3.4475: RNCC: 5 | RNVC: 2

15 Oct 2003

5975-14-485-1265
Cable Hanger

144851265
802290130715: RNCC: 3 | RNVC: 2
SDM802290130715: RNCC: 5 | RNVC: 9

10 Jan 1997

5975-14-279-9452
Stuffing Tube

142799452
540600: RNCC: 3 | RNVC: 2
54060: RNCC: 5 | RNVC: 2
BV5L0NG: RNCC: 5 | RNVC: 2

1 Jan 1971

5975-14-512-0245
Cable Marker Sleeve

145120245
0053134: RNCC: 3 | RNVC: 2
98423606: RNCC: 3 | RNVC: 9

3 Feb 1999

5975-27-010-4968
Junction Box

270104968
98003336: RNCC: 2 | RNVC: 1

26 Nov 2001

5975-14-444-6871
Cable Marker Sleeve

144446871
1-048: RNCC: 3 | RNVC: 2

16 Jan 1991

5975-14-473-3977
Nonmetallic Raceway

144733977
332A61-3350-00: RNCC: 3 | RNVC: 2

13 Dec 1994

5975-14-384-6639
Cable Marker Sleeve

143846639
96080797: RNCC: 3 | RNVC: 2

2 Jun 1983

5975-14-533-2820
Metallic Raceway

145332820
204062: RNCC: 3 | RNVC: 2

29 Jan 2003

5975-14-251-8436
Rigid Metal Conduit

142518436
MRBPE16ADXFILETEMANCH0NNEPEINT: RNCC: 2 | RNVC: 2

1 Jan 1968

5975-14-410-9537
Push Button

144109537
16033341: RNCC: 3 | RNVC: 2
B16033341: RNCC: 5 | RNVC: 9
16033341: RNCC: 5 | RNVC: 9

23 Jul 1986

5975-14-342-4950
Metallic Raceway

143424950
4770001880: RNCC: 3 | RNVC: 2

16 May 1977

5975-33-002-3273
Blank Panel

330023273
115.04.32: RNCC: 3 | RNVC: 2

22 Aug 1994

5975-14-309-6684
Junction Box

143096684
121E63-234-10-07M1: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-438-8996
Cable Hanger

144388996
332A61-6123-01: RNCC: 3 | RNVC: 2

11 Apr 1990

5975-14-380-3967
Cable Marker Sleeve

143803967
4A1497: RNCC: 3 | RNVC: 2
86-266-9151: RNCC: 6 | RNVC: 9

8 Nov 1982

5975-14-465-8267
Cable Marker Sleeve

144658267
PR169-48302: RNCC: 3 | RNVC: 2

14 Oct 1993

5975-14-297-4198
Fanning Strip

142974198
NO PRIMARY REF14-297-4198: RNCC: 3 | RNVC: 2
RESARMEM6-2P7: RNCC: 5 | RNVC: 9

1 Jan 1973

5975-14-279-1489
Push Button

142791489
NO PRIMARY REF14-279-1489: RNCC: 3 | RNVC: 2
100SN0IRE: RNCC: 5 | RNVC: 2

1 Jan 1971

5975-14-312-8866
Junction Box Cover

143128866
160-79570-04C: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-361-1625
Cable Marker Sleeve

143611625
78-15CXZ15S20-38-37JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ15S20-38-37J: RNCC: 5 | RNVC: 2

24 Jan 1980

5975-14-467-0426
Metallic Raceway

144670426
TB30-61023-001: RNCC: 3 | RNVC: 2

16 Dec 1993

5975-14-377-5572
Cable Marker Sleeve

143775572
9742-235: RNCC: 3 | RNVC: 2

17 May 1982

5975-14-327-2114
Cable Hanger

143272114
52688: RNCC: 3 | RNVC: 9
A24/15-18: RNCC: 5 | RNVC: 9
52.688: RNCC: 5 | RNVC: 9
20681459: RNCC: 5 | RNVC: 9

2 Jul 1975

5975-14-391-2417
Cable Marker Sleeve

143912417
03620002001D: RNCC: 3 | RNVC: 2
3597470043561: RNCC: 5 | RNVC: 2
362002-01REPD: RNCC: 5 | RNVC: 2
362002REPD: RNCC: 5 | RNVC: 2

1 Mar 1984

5975-14-274-0296
Stuffing Tube

142740296
C68312A1B21MD1218A660AHQ1: RNCC: 2 | RNVC: 2
871800: RNCC: 3 | RNVC: 2
2006: RNCC: 3 | RNVC: 2
CM18: RNCC: 5 | RNVC: 2
98322: RNCC: 5 | RNVC: 2
C63-021CM18: RNCC: 5 | RNVC: 2
1004-871800: RNCC: 5 | RNVC: 2

1 Jan 1971

5975-14-486-3915
Insulator Bracket

144863915
355A61-5104-25: RNCC: 3 | RNVC: 2

12 Mar 1997

5975-14-416-7318
Cable Marker Sleeve

144167318
HT20-25BA12-052: RNCC: 3 | RNVC: 2

25 Jun 1987

5975-14-469-7146
Junction Box

144697146
704A45-367-047: RNCC: 1 | RNVC: 2
BJ2620A: RNCC: 3 | RNVC: 2

4 May 1994

5975-14-368-6333
Stuffing Tube

143686333
BP4919005: RNCC: 3 | RNVC: 2
BP4919-005: RNCC: 5 | RNVC: 2

20 Feb 1981

5975-14-545-9369
Cable Marker Sleeve

145459369
03740120004Z: RNCC: 3 | RNVC: 2
03740120004Z: RNCC: 5 | RNVC: 2
6070-GT-0000077: RNCC: 5 | RNVC: 9

30 May 2005

5975-14-555-6725
Cable Marker Sleeve

145556725
0301 0008 010 BK: RNCC: 3 | RNVC: 2
03010008010BK: RNCC: 5 | RNVC: 2
0301 0308 010 BK: RNCC: 5 | RNVC: 9
0301-0308-010BK: RNCC: 5 | RNVC: 9

6 Dec 2007

5975-14-383-3390
Cable Marker Sleeve

143833390
78-15CXZ2S20-30-31JAUNE: RNCC: 3 | RNVC: 2
78-15CXZ2S20J30-31: RNCC: 5 | RNVC: 2
78-15CXZ2S20-30-31J: RNCC: 5 | RNVC: 2

11 Apr 1983

5975-14-415-0031
Cable Marker Sleeve

144150031
HT20-25J0R2: RNCC: 3 | RNVC: 2

26 Mar 1987

5975-14-485-4067
Junction Box

144854067
1554-001/R0729: RNCC: 3 | RNVC: 2
1631554/001: RNCC: 5 | RNVC: 2
1554-001: RNCC: 5 | RNVC: 2

23 Jan 1997

5975-14-287-0727
Cable Marker Sleeve

142870727
MGCM3BA10-27: RNCC: 3 | RNVC: 2
9554819270: RNCC: 5 | RNVC: 2
MGCM3BA10-27: RNCC: 5 | RNVC: 9

1 Jan 1972

5975-14-505-4646
Interconnecting Box

145054646
NO PRIMARY REF14-505-4646: RNCC: 3 | RNVC: 2
12242026: RNCC: 5 | RNVC: 2

18 Mar 1998

5975-14-545-9744
Cable Marker Sleeve

145459744
03740140004X: RNCC: 3 | RNVC: 2
03740140004X: RNCC: 5 | RNVC: 2
6070-GT-0000117: RNCC: 5 | RNVC: 9

31 May 2005

5975-27-046-8608
Blank Panel

270468608
104-30-0039-01: RNCC: 2 | RNVC: 1

16 Oct 2009

5975-14-397-0760
Junction Box

143970760
NO PRIMARY REF14-397-0760: RNCC: 3 | RNVC: 2
704A45-757-005: RNCC: 5 | RNVC: 2
56-819-271: RNCC: 5 | RNVC: 9
3511-318-19271: RNCC: 5 | RNVC: 9
BJ-462A: RNCC: 6 | RNVC: 9

1 Dec 1984

5975-14-536-9914
Metallic Raceway

145369914
5010579480: RNCC: 3 | RNVC: 2
IF-192-0303: RNCC: 5 | RNVC: 9

24 Sep 2003

5975-14-407-7151
Cable Marker Sleeve

144077151
NO PRIMARY REF14-407-7151: RNCC: 3 | RNVC: 2
5127-11: RNCC: 5 | RNVC: 9

27 Feb 1986

5975-14-308-9769
Junction Box

143089769
NO PRIMARY REF14-308-9769: RNCC: 3 | RNVC: 2
501-847-710-0: RNCC: 5 | RNVC: 2
77253: RNCC: 5 | RNVC: 9

1 Jan 1974

5975-14-323-6595
Junction Box

143236595
121E63-234-10-07M2: RNCC: 3 | RNVC: 2

1 Jan 1975

5975-14-374-0646
Cable Marker Sleeve

143740646
353063-01A: RNCC: 3 | RNVC: 2
PLI02X10A: RNCC: 5 | RNVC: 2

8 Dec 1981

5975-14-441-5966
Junction Box

144415966
R4P661-75M3: RNCC: 3 | RNVC: 2

5 Sep 1990

5975-14-536-9918
Metallic Raceway

145369918
5010579488: RNCC: 3 | RNVC: 2
IF-192-0311: RNCC: 5 | RNVC: 9

24 Sep 2003

5975-15-052-0056
Cable Collar

150520056
B831-12-21-08: RNCC: 3 | RNVC: 2

1 Jan 1974

5975-14-386-0334
Guy

143860334
IF036-017: RNCC: 3 | RNVC: 9

24 Aug 1983

5975-14-339-4438
Cable Marker Sleeve

143394438
SLP15-10J0R18NR: RNCC: 3 | RNVC: 2
620-849-018-0: RNCC: 5 | RNVC: 2
620-849-018-0: RNCC: 5 | RNVC: 2

18 Jan 1977

Load More Results