What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 114 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 114of 491

5975-01-532-8076
Electrical-Electronic Equipment Chassis

015328076
G583103-1: RNCC: 3 | RNVC: 2
G583103-1: RNCC: 5 | RNVC: 2

22 Aug 2005

5975-01-532-1067
Electrical Components Tie Down Strap

015321067
017-00146: RNCC: 3 | RNVC: 2

28 Jul 2005

5975-01-530-6456
Electronic Equipment Mounting Tray

015306456
902663-803: RNCC: 3 | RNVC: 2

7 Jun 2005

5975-01-527-1408
Chassis Base

015271408
100-008421-G004: RNCC: 3 | RNVC: 2
100-008421-G001: RNCC: 5 | RNVC: 9
100-008421-G002: RNCC: 5 | RNVC: 9

21 Jan 2005

5975-01-527-1413
Chassis Base

015271413
100-013945-P001: RNCC: 3 | RNVC: 2
9076-00A: RNCC: 5 | RNVC: 2
100-008380-P001: RNCC: 5 | RNVC: 9

21 Jan 2005

5975-01-526-4916
Flexible Metal Conduit

015264916
78801: RNCC: 3 | RNVC: 2

20 Dec 2004

5975-01-526-4921
Flexible Metal Conduit

015264921
78832: RNCC: 3 | RNVC: 2

20 Dec 2004

5975-01-518-3292
Electronic Equipment Mounting Tray

015183292
7593370: RNCC: 3 | RNVC: 2
SWT0001100: RNCC: 5 | RNVC: 9
PSC0000000159: RNCC: 5 | RNVC: 9
233-571: RNCC: 5 | RNVC: 9

9 Mar 2004

5975-01-517-1766
Electrical Equipment Mounting Base

015171766
RF-5073VSM: RNCC: 3 | RNVC: 2
RF-5073VSM: RNCC: 5 | RNVC: 2
RF-5073VSM: RNCC: 5 | RNVC: 9
5975PL1611931: RNCC: 6 | RNVC: 9

31 Jan 2004

5975-01-513-4184
Cushion Clamp

015134184
14-02043: RNCC: 3 | RNVC: 2
14-02043: RNCC: 3 | RNVC: 9
14-02043: RNCC: 5 | RNVC: 2

24 Sep 2003

5975-01-512-7804
Flexible Metal Conduit Assembly

015127804
CA00884-2K4WL4W00210: RNCC: 3 | RNVC: 2
CA00884-2K4WL4W00210: RNCC: 5 | RNVC: 9

10 Sep 2003

5975-01-512-7800
Flexible Metal Conduit Assembly

015127800
CA00884-2E4WL4W00260: RNCC: 3 | RNVC: 2
CA00884-2E4WL4W00260: RNCC: 5 | RNVC: 9

10 Sep 2003

5975-01-504-7746
Electrical Equipment Mounting Base

015047746
902220-801: RNCC: 3 | RNVC: 2
MT-7168/ARC-231(V)(C): RNCC: 5 | RNVC: 1

7 Feb 2003

5975-01-504-5483
Electrical Equipment Mounting Base

015045483
200-85099-101: RNCC: 3 | RNVC: 2
247-1027-010: RNCC: 5 | RNVC: 9
247-1027-010: RNCC: 7 | RNVC: 2

31 Jan 2003

5975-01-499-8654
Electrical Tie Down Mounting Base

014998654
CB3019AA3N: RNCC: 3 | RNVC: 2
7081542: RNCC: 5 | RNVC: 2
7079345: RNCC: 5 | RNVC: 2

6 Aug 2002

5975-01-495-3421
Electrical Components Tie Down Strap

014953421
SAE-AS23190: RNCC: 3 | RNVC: 1
AS33671-1-9: RNCC: 3 | RNVC: 2
AS33671-1-9: RNCC: 3 | RNVC: 9

13 Mar 2002

5975-01-494-9125
Chassis Base

014949125
H302A024: RNCC: 3 | RNVC: 2
VA-016309-0002: RNCC: 5 | RNVC: 2
124975: RNCC: 5 | RNVC: 2

27 Feb 2002

5975-01-493-6209
Electrical Conduit Locknut

014936209
863-000748: RNCC: 3 | RNVC: 2
NN-29-BR: RNCC: 5 | RNVC: 2
NN-29-BK: RNCC: 5 | RNVC: 9

11 Jan 2002

5975-01-491-0479
Knockout Reducing Washer

014910479
PP-050: RNCC: 3 | RNVC: 2

11 Oct 2001

5975-01-490-7033
Electrical Equipment Rack

014907033
A3274023-3: RNCC: 3 | RNVC: 2

4 Oct 2001

5975-01-488-6198
Flexible Nonmetallic Conduit

014886198
12339351-2: RNCC: 3 | RNVC: 2

29 Aug 2001

5975-01-487-8248
Electrical Components Tie Down Strap

014878248
11567533: RNCC: 3 | RNVC: 2

20 Aug 2001

5975-01-484-7337
Rigid Metal Conduit

014847337
9238990905: RNCC: 3 | RNVC: 2
923899.0905: RNCC: 5 | RNVC: 2
923828.0925: RNCC: 5 | RNVC: 9

7 May 2001

5975-01-484-2793
Electrical-Electronic Equipment Chassis

014842793
VA-016753-0002: RNCC: 3 | RNVC: 2

24 Apr 2001

5975-01-481-6821
Cable Strain Relief Bushing

014816821
863-000518: RNCC: 3 | RNVC: 2
02171: RNCC: 3 | RNVC: 2
CD16NA-BK-N-O: RNCC: 3 | RNVC: 2
69915K57: RNCC: 5 | RNVC: 2
69915K57: RNCC: 5 | RNVC: 2

19 Jan 2001

5975-01-481-5123
Junction Box

014815123
863-000500: RNCC: 3 | RNVC: 2
2IH7S2-1: RNCC: 5 | RNVC: 2
LTX11-7: RNCC: 5 | RNVC: 9
58371-1/2: RNCC: 5 | RNVC: 9

11 Jan 2001

5975-01-481-4977
Electrical Components Tie Down Strap

014814977
863-000523: RNCC: 3 | RNVC: 2
31000-542: RNCC: 3 | RNVC: 2
7130K56: RNCC: 5 | RNVC: 2
9-00004545: RNCC: 5 | RNVC: 9
2202-900-003676: RNCC: D | RNVC: 9

10 Jan 2001

5975-01-481-4499
Electrical Cable Protector

014814499
CLT50N-C630: RNCC: 3 | RNVC: 2
863-000670: RNCC: 5 | RNVC: 9

9 Jan 2001

5975-01-480-5616
Cable Hanger

014805616
9214370001: RNCC: 3 | RNVC: 2
921437.0001: RNCC: 5 | RNVC: 2

27 Nov 2000

5975-01-475-3814
Electrical Box Connector

014753814
712HS277NF1520-31: RNCC: 3 | RNVC: 2
712-277: RNCC: D | RNVC: 9

2 Jun 2000

5975-01-474-7487
Electrical Cable Nipple

014747487
R78063: RNCC: 3 | RNVC: 9

11 May 2000

5975-01-471-9490
Strain Electrical Conductor Clamp

014719490
30-302-1D06G03: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-4579
Guide Rail

014714579
1207667: RNCC: 3 | RNVC: 2

3 Feb 2000

5975-01-470-0371
Flexible Metal Conduit

014700371
74525K82: RNCC: 3 | RNVC: 2
74525K82: RNCC: 5 | RNVC: 2

6 Dec 1999

5975-01-467-5849
Electronic Equipment Mounting Tray

014675849
69-00760-002: RNCC: 3 | RNVC: 2
69-00760-001: RNCC: 3 | RNVC: 2
MX-11918/USC-62(V)(C): RNCC: 5 | RNVC: 2

3 Sep 1999

5975-01-465-9074
Electrical-Electronic Equipment Chassis

014659074
E-MCC-1600: RNCC: 3 | RNVC: 9

25 Jun 1999

5975-01-465-1268
Electrical Equipment Mounting Base

014651268
822-1479-001: RNCC: 3 | RNVC: 2

21 May 1999

5975-01-457-7895
Electrical-Electronic Equipment Chassis

014577895
0N616724-1: RNCC: 3 | RNVC: 2

4 Aug 1998

5975-01-457-7762
Electrical-Electronic Equipment Panel

014577762
0N616772-3: RNCC: 3 | RNVC: 2
0N616722-2: RNCC: 5 | RNVC: 2
0N616722-1: RNCC: 5 | RNVC: 2

3 Aug 1998

5975-01-457-0854
Electrical-Electronic Equipment Chassis

014570854
0N616717-1: RNCC: 3 | RNVC: 2

10 Jul 1998

5975-01-457-0148
Electrical-Electronic Equipment Panel

014570148
0N616715-1: RNCC: 3 | RNVC: 2

7 Jul 1998

5975-01-454-6916
Junction Box

014546916
A404DSC: RNCC: 3 | RNVC: 2

9 Apr 1998

5975-01-452-7801
Electronic Junction Rack

014527801
36025800: RNCC: 3 | RNVC: 2

6 Feb 1998

5975-01-451-4192
Electrical Equipment Rack

014514192
A3193434-1: RNCC: 3 | RNVC: 2

16 Dec 1997

5975-01-448-8894
Junction Box

014488894
P0614-2608-4: RNCC: 3 | RNVC: 2
5-15-18999: RNCC: 5 | RNVC: 9

12 Sep 1997

5975-01-446-0862
Junction Box Cover

014460862
181A358-1: RNCC: 3 | RNVC: 2

21 Jun 1997

5975-01-442-1230
Nonmetallic Raceway

014421230
G2X1LG6: RNCC: 3 | RNVC: 2
E2X1LG6: RNCC: 5 | RNVC: 9

5 Mar 1997

5975-01-438-6015
Junction Box

014386015
A806SC: RNCC: 3 | RNVC: 2

13 Nov 1996

5975-01-435-1448
Flexible Metal Conduit

014351448
M24758/1-06: RNCC: 2 | RNVC: 2
MIL-C-24758/1: RNCC: 4 | RNVC: 1

15 Aug 1996

5975-01-434-1773
Strain Relief Grip

014341773
7HE487: RNCC: 3 | RNVC: 2
6702554: RNCC: 5 | RNVC: 2
7HE487: RNCC: 5 | RNVC: 9
073031204: RNCC: 5 | RNVC: 9

22 Jul 1996

5975-01-431-4347
Blank Panel

014314347
MS14129-14: RNCC: 2 | RNVC: 2

13 May 1996

5975-01-431-4131
Electronic Equipment Mounting Tray

014314131
938668-801: RNCC: 3 | RNVC: 2

13 May 1996

5975-01-431-3657
Nonmetallic Raceway

014313657
LD5IW6-A: RNCC: 3 | RNVC: 2

11 May 1996

5975-01-422-3449
Cable Spacer

014223449
12364768: RNCC: 3 | RNVC: 2
12364768: RNCC: 5 | RNVC: 2

30 Nov 1995

5975-01-420-8385
Ground Rod

014208385
K2-12CS: RNCC: 3 | RNVC: 2

26 Oct 1995

5975-01-420-8383
Ground Rod

014208383
K2-10CS: RNCC: 3 | RNVC: 2

26 Oct 1995

5975-01-420-8384
Ground Rod

014208384
K2L-20CS: RNCC: 3 | RNVC: 2

26 Oct 1995

5975-01-420-7309
Ground Rod

014207309
K2-2-10CS: RNCC: 3 | RNVC: 2

24 Oct 1995

5975-01-420-7310
Ground Rod

014207310
K2L-12CS: RNCC: 3 | RNVC: 2

24 Oct 1995

5975-01-420-7308
Ground Rod

014207308
K2-20CS: RNCC: 3 | RNVC: 2

24 Oct 1995

5975-01-420-6821
Ground Rod

014206821
K2-40CS: RNCC: 3 | RNVC: 2

23 Oct 1995

5975-01-420-2700
Electrical-Electronic Equipment Panel

014202700
084835: RNCC: 3 | RNVC: 2
REPAIR PART: RNCC: 5 | RNVC: 1
084835: RNCC: 5 | RNVC: 9

12 Oct 1995

5975-01-418-8330
Flexible Nonmetallic Conduit

014188330
E22401A-000000: RNCC: 3 | RNVC: 2

7 Sep 1995

5975-01-413-0605
Electrical Box Connector

014130605
LT 501: RNCC: 3 | RNVC: 2
APC050: RNCC: 5 | RNVC: 9

4 May 1995

5975-01-412-9096
Conduit Outlet

014129096
E984H: RNCC: 3 | RNVC: 9
E984H: RNCC: 5 | RNVC: 1
12416381: RNCC: D | RNVC: 9

1 May 1995

5975-01-409-1354
Rigid Metal Conduit Assembly

014091354
115384-02-33.38: RNCC: 3 | RNVC: 9
757NA001B08-33.38: RNCC: 5 | RNVC: 2
841819-35: RNCC: 5 | RNVC: 9
115384-02-33.38: RNCC: C | RNVC: 1
841819: RNCC: D | RNVC: 9

7 Mar 1995

5975-01-406-3395
Electrical Equipment Mounting Base

014063395
500176: RNCC: 3 | RNVC: 2
LL-H36-2041: RNCC: 5 | RNVC: 1

30 Dec 1994

5975-01-406-3332
Electrical Equipment Cabinet Case

014063332
500285: RNCC: 3 | RNVC: 2
LL-H36-2023: RNCC: 5 | RNVC: 1

30 Dec 1994

5975-01-406-3324
Electrical-Electronic Equipment Chassis

014063324
500297: RNCC: 3 | RNVC: 2
LL-H36-2017: RNCC: 5 | RNVC: 1

30 Dec 1994

5975-01-398-5840
Electrical Components Tie Down Strap

013985840
MS3368-3-9A: RNCC: 2 | RNVC: 2
AS33681: RNCC: 5 | RNVC: 1
AS33681: RNCC: 5 | RNVC: 9

5 Nov 1994

5975-01-398-1886
Conduit Outlet

013981886
T150-M: RNCC: 3 | RNVC: 9
T150-M: RNCC: 5 | RNVC: 2

26 Oct 1994

5975-01-394-4049
Electrical Box Connector

013944049
8406: RNCC: 3 | RNVC: 2

9 Aug 1994

5975-01-390-1498
Electrical Cable Nipple

013901498
202S132-25S-0: RNCC: 3 | RNVC: 2
202S132-25S: RNCC: 5 | RNVC: 2
10567836-2: RNCC: 5 | RNVC: 2

12 May 1994

5975-01-388-0115
Electrical-Electronic Equipment Panel

013880115
10-0488: RNCC: 3 | RNVC: 2
LL-H36-5559: RNCC: 5 | RNVC: 1

17 Mar 1994

5975-01-387-7511
Transit Frame

013877511
S-4: RNCC: 3 | RNVC: 2
S-4: RNCC: 5 | RNVC: 9

11 Mar 1994

5975-01-386-6985
Electrical-Electronic Equipment Chassis

013866985
H314A003-107: RNCC: 3 | RNVC: 2

11 Feb 1994

5975-01-386-0882
Electrical-Electronic Equipment Chassis

013860882
903146-1: RNCC: 3 | RNVC: 9
903146: RNCC: D | RNVC: 9

27 Jan 1994

5975-01-385-8686
Electrical Cable Nipple

013858686
222S152-25C-0: RNCC: 3 | RNVC: 2
10567835-4: RNCC: 5 | RNVC: 2
222S152-25S: RNCC: 5 | RNVC: 9
222S152-25S-0: RNCC: 5 | RNVC: 9

21 Jan 1994

5975-01-385-7622
Flexible Nonmetallic Conduit

013857622
HCTE-0375-0-SP: RNCC: 3 | RNVC: 2
120-112-12B: RNCC: 5 | RNVC: 2
HCTE-0375-0: RNCC: 5 | RNVC: 9

18 Jan 1994

5975-01-385-6781
Electrical-Electronic Equipment Chassis

013856781
676-0764-001: RNCC: 3 | RNVC: 2

16 Jan 1994

5975-01-384-6063
Junction Box Cover

013846063
52-C-0: RNCC: 3 | RNVC: 2

18 Dec 1993

5975-01-382-9350
Electrical-Electronic Equipment Chassis

013829350
400686-001C: RNCC: 3 | RNVC: 2
LL-H36-4588: RNCC: 5 | RNVC: 1

12 Nov 1993

5975-01-382-7955
Electrical Cable Nipple

013827955
222S132-25C-0: RNCC: 3 | RNVC: 2
222S132-25S: RNCC: 5 | RNVC: 9
10567835-2: RNCC: 5 | RNVC: 9

9 Nov 1993

5975-01-381-8910
Electrical-Electronic Equipment Chassis

013818910
6405847N03: RNCC: 3 | RNVC: 9
6405847N03: RNCC: 5 | RNVC: 2
64-5847N03: RNCC: 5 | RNVC: 9

23 Oct 1993

5975-01-379-8325
Junction Box

013798325
12351409: RNCC: 3 | RNVC: 2

8 Sep 1993

5975-01-374-1863
Electrical Equipment Shelf

013741863
K1091500-1220G1500IRRIDITE: RNCC: 3 | RNVC: 2
KX1009: RNCC: 3 | RNVC: 2
721141-3: RNCC: 7 | RNVC: 2

17 Apr 1993

5975-01-372-3404
Electrical Components Tie Down Strap

013723404
53064-7: RNCC: 3 | RNVC: 2
868188-0007: RNCC: 5 | RNVC: 9
868188-0007: RNCC: C | RNVC: 1

6 Mar 1993

5975-01-372-0978
Electrical Equipment Mounting Base

013720978
94956-991: RNCC: 3 | RNVC: 9
6850001-441: RNCC: 5 | RNVC: 2
6850001-441: RNCC: 5 | RNVC: 9
6850001-441: RNCC: 5 | RNVC: 9

3 Mar 1993

5975-01-370-5089
Junction Box

013705089
68371-1/2: RNCC: 3 | RNVC: 2
88035A0073: RNCC: 5 | RNVC: 9
88035A0073: RNCC: D | RNVC: 9

23 Jan 1993

5975-01-367-1859
Electrical Equipment Mounting Base

013671859
RF-5072VSM-03: RNCC: 3 | RNVC: 2
10181-5072-03: RNCC: 3 | RNVC: 2
RF-5072VSM-03: RNCC: 3 | RNVC: 2
10181-5072-03: RNCC: 5 | RNVC: 2
RF-5072VSM: RNCC: 5 | RNVC: 9

9 Nov 1992

5975-01-362-8229
Electrical Conduit Adapter

013628229
LT50P: RNCC: 3 | RNVC: 2
73-1332029-1: RNCC: 5 | RNVC: 9
73-1332029-1: RNCC: 7 | RNVC: 2

15 Aug 1992

5975-01-358-4349
Interconnecting Box

013584349
2-195-6-00662: RNCC: 3 | RNVC: 1
2-195-6-10023: RNCC: 3 | RNVC: 2
2-195-6-00596: RNCC: 5 | RNVC: 9
2HG331: RNCC: C | RNVC: 1

14 May 1992

5975-01-356-6749
Cable Strain Relief Bushing

013566749
1223: RNCC: 3 | RNVC: 2
C5118717: RNCC: 5 | RNVC: 2
C5118717: RNCC: 7 | RNVC: 9

9 Apr 1992

5975-01-353-5710
Electrical Cable Nipple

013535710
4052: RNCC: 3 | RNVC: 2
A51381-2: RNCC: 5 | RNVC: 9

13 Feb 1992

5975-01-353-2166
Electrical Cable Nipple

013532166
6294501: RNCC: 3 | RNVC: 2

7 Feb 1992

5975-01-347-2578
Flexible Nonmetallic Conduit

013472578
SAE-AS81914/1: RNCC: 3 | RNVC: 1
M81914/1-1007: RNCC: 3 | RNVC: 2
M81914/1-1007: RNCC: 5 | RNVC: 9
MIL-T-81914: RNCC: 5 | RNVC: 9

18 Oct 1991

5975-01-346-2077
Electrical Bonding Ring

013462077
TR10AI: RNCC: 3 | RNVC: 2
TR10AI-TINEL-LOCK-RING: RNCC: 5 | RNVC: 9
TR10AI: RNCC: 5 | RNVC: 9
TR10AI: RNCC: 5 | RNVC: 9
5365-009-10AI: RNCC: C | RNVC: 1

28 Sep 1991

5975-01-345-6513
Electrical Components Tie Down Strap

013456513
PLT2M-M: RNCC: 3 | RNVC: 2

23 Sep 1991

5975-01-344-7124
Electrical Box Connector

013447124
NHC-1037-ZP: RNCC: 3 | RNVC: 2

6 Sep 1991

5975-01-343-3509
Electrical Tie Down Mounting Base

013433509
21038: RNCC: 3 | RNVC: 2
P27600: RNCC: 5 | RNVC: 9

11 Aug 1991

5975-01-342-1292
Electrical Equipment Mounting Base

013421292
78-8051-9180-2: RNCC: 3 | RNVC: 2
MT-6811/AMS-2: RNCC: 5 | RNVC: 1

16 Jul 1991

5975-01-341-9778
Stuffing Tube

013419778
SC-D-914847-3: RNCC: 1 | RNVC: 2
CG-3138: RNCC: 3 | RNVC: 9
CG-3138: RNCC: 5 | RNVC: 2

12 Jul 1991

5975-01-341-3644
Electrical Conduit Adapter

013413644
50-075-0239-89: RNCC: 3 | RNVC: 2
A3006864: RNCC: 3 | RNVC: 2
011000-4001: RNCC: 5 | RNVC: 2

27 Jun 1991

5975-01-339-9970
Electrical-Electronic Equipment Panel

013399970
5041-8912: RNCC: 3 | RNVC: 2
5041-8912: RNCC: 3 | RNVC: 9
5041-3991: RNCC: 5 | RNVC: 2
5041-3991: RNCC: 5 | RNVC: 9
5041-3991: RNCC: 5 | RNVC: 9

5 Jun 1991

5975-01-339-9969
Electrical-Electronic Equipment Panel

013399969
5041-8913: RNCC: 3 | RNVC: 9
5041-3988: RNCC: 5 | RNVC: 9
5041-8913: RNCC: 5 | RNVC: 9
5041-8913: RNCC: C | RNVC: 1

5 Jun 1991

5975-01-339-5948
Electrical Box Connector

013395948
5236: RNCC: 3 | RNVC: 2
5236: RNCC: 5 | RNVC: 2

24 May 1991

5975-01-339-5027
Electrical Conduit Adapter

013395027
8654-160400N055: RNCC: 3 | RNVC: 2
841506-23: RNCC: 3 | RNVC: 2
841506-23: RNCC: 5 | RNVC: 9

23 May 1991

5975-01-339-5025
Electrical Conduit Adapter

013395025
8654-120400N055: RNCC: 3 | RNVC: 2
841506-030: RNCC: 5 | RNVC: 9

23 May 1991

5975-01-336-9064
Junction Box Assembly

013369064
70550-02130-050: RNCC: 3 | RNVC: 2
70070-552121-041: RNCC: 5 | RNVC: 9
70070-55212-041: RNCC: 5 | RNVC: 9

3 Apr 1991

5975-01-336-0186
Conduit Outlet Cover

013360186
3100370-501: RNCC: 3 | RNVC: 2

19 Mar 1991

5975-01-335-9257
Electrical Components Tie Down Strap

013359257
53064-6: RNCC: 3 | RNVC: 2
868188-0006: RNCC: 5 | RNVC: 2
868188-0006: RNCC: 5 | RNVC: 9

15 Mar 1991

5975-01-335-1901
Rigid Metal Conduit Assembly

013351901
223954-DI0600: RNCC: 3 | RNVC: 2
253766-0044: RNCC: 5 | RNVC: 9
3130918G044: RNCC: 7 | RNVC: 2

6 Mar 1991

5975-01-334-4728
Conduit Outlet

013344728
2IH5S2-2: RNCC: 3 | RNVC: 2
LTX14-5: RNCC: 3 | RNVC: 9
LTX14-5-L: RNCC: 5 | RNVC: 9

23 Feb 1991

5975-01-333-5983
Strain Relief Bar

013335983
13201970-01: RNCC: 3 | RNVC: 9
13201970-01: RNCC: 5 | RNVC: 2
13201970-01: RNCC: C | RNVC: 1

7 Feb 1991

5975-01-333-5874
Electrical Conduit Ferrule

013335874
2-745129-6: RNCC: 3 | RNVC: 2
841803-4: RNCC: 5 | RNVC: 9
841803-4: RNCC: 7 | RNVC: 2

6 Feb 1991

5975-01-333-5873
Electrical Conduit Ferrule

013335873
1-745130-2: RNCC: 3 | RNVC: 2
841803-3: RNCC: 5 | RNVC: 9

6 Feb 1991

5975-01-333-3131
Special Item

013333131
841493-5: RNCC: 3 | RNVC: 2
EA90-20822S155: RNCC: 5 | RNVC: 2
841493-5: RNCC: 5 | RNVC: 9

30 Jan 1991

5975-01-333-0668
Stuffing Tube

013330668
841529-4: RNCC: 3 | RNVC: 2
817-20632S155: RNCC: 5 | RNVC: 2
841529-4: RNCC: 5 | RNVC: 9

23 Jan 1991

5975-01-332-8978
Electrical Wall Plate

013328978
5028: RNCC: 3 | RNVC: 2
RCV1-GFR: RNCC: 5 | RNVC: 9

19 Jan 1991

5975-01-331-9045
Strain Electrical Conductor Clamp

013319045
MB-1: RNCC: 3 | RNVC: 2
Z22-0002-002: RNCC: 7 | RNVC: 1

31 Dec 1990

5975-01-329-1505
Electrical Wall Plate

013291505
S1962: RNCC: 3 | RNVC: 2
4976: RNCC: 5 | RNVC: 9
5215-0: RNCC: 5 | RNVC: 9
4976-GY: RNCC: 5 | RNVC: 9

11 Nov 1990

5975-01-328-6229
Electrical Cable Nipple

013286229
202F221-51-07-/164: RNCC: 3 | RNVC: 2
12910598-12: RNCC: 5 | RNVC: 2
12273147-2-1.1-07/9: RNCC: 7 | RNVC: 2

6 Nov 1990

5975-01-328-6228
Electrical Cable Nipple

013286228
12273147-5-1.1-10/9: RNCC: 1 | RNVC: 2
202F253-51-10/164: RNCC: 3 | RNVC: 2

6 Nov 1990

5975-01-325-3706
Electrical Equipment Cabinet

013253706
6005671: RNCC: 3 | RNVC: 2

4 Sep 1990

5975-01-325-0069
Electrical Components Tie Down Strap

013250069
3018920: RNCC: 3 | RNVC: 2

25 Aug 1990

5975-01-322-6373
Junction Box

013226373
12342198: RNCC: 3 | RNVC: 2

11 Jul 1990

5975-01-320-2665
Electrical Components Tie Down Strap

013202665
343-0549-00: RNCC: 3 | RNVC: 2
TY100: RNCC: 5 | RNVC: 2

23 May 1990

5975-01-318-4726
Conduit Outlet

013184726
ARE46: RNCC: 3 | RNVC: 2

19 Apr 1990

5975-01-317-3255
Electrical Box Connector

013173255
STA-7: RNCC: 3 | RNVC: 9
STA-7: RNCC: 5 | RNVC: 2

28 Mar 1990

5975-01-316-7589
Conduit Outlet

013167589
2653: RNCC: 3 | RNVC: 2

15 Mar 1990

5975-01-316-3433
Electrical Equipment Mounting Base

013163433
755017A9005: RNCC: 3 | RNVC: 2
MT4495/GRC-193: RNCC: 5 | RNVC: 2
755017A9005: RNCC: 7 | RNVC: 2
MT4495: RNCC: C | RNVC: 1
MT-4495: RNCC: C | RNVC: 1

8 Mar 1990

5975-01-314-8181
Junction Box

013148181
A14107JFGQRR OR A14107JFGQRPWR: RNCC: 3 | RNVC: 2
A14107JFGQR: RNCC: 5 | RNVC: 9

6 Feb 1990

5975-01-314-4662
Stuffing Tube

013144662
SE93103B-34C: RNCC: 3 | RNVC: 2
90-31032-155: RNCC: 5 | RNVC: 2

31 Jan 1990

5975-01-314-3648
Cathode Electrical Brush

013143648
SP-107A8012: RNCC: 3 | RNVC: 2

28 Jan 1990

5975-01-309-3195
Nonmetallic Raceway

013093195
D-2: RNCC: 3 | RNVC: 9
12552949: RNCC: 7 | RNVC: 2

15 Oct 1989

5975-01-308-5334
Flexible Metal Conduit

013085334
5384-100-002: RNCC: 3 | RNVC: 2

30 Sep 1989

5975-01-307-1716
Electrical Equipment Mounting Base

013071716
481-200470: RNCC: 3 | RNVC: 2
481-200471: RNCC: 5 | RNVC: 9
481-200470: RNCC: 5 | RNVC: 9

7 Sep 1989

5975-01-307-0204
Flexible Metal Conduit

013070204
7127K26: RNCC: 3 | RNVC: 2

5 Sep 1989

5975-01-306-5090
Electrical-Electronic Equipment Panel

013065090
42006: RNCC: 3 | RNVC: 2

25 Aug 1989

5975-01-306-3777
Electrical-Electronic Equipment Panel

013063777
EC-10440-1: RNCC: 3 | RNVC: 2

23 Aug 1989

5975-01-306-2258
Electrical Equipment Mounting Base

013062258
91497-991: RNCC: 3 | RNVC: 9
2537990-801: RNCC: 5 | RNVC: 9
91497-991: RNCC: C | RNVC: 1

19 Aug 1989

5975-01-305-8185
Cable Hanger

013058185
093-597-00: RNCC: 3 | RNVC: 2

12 Aug 1989

5975-01-304-2050
Electrical Equipment Mounting Base

013042050
A3132625: RNCC: 3 | RNVC: 2
MT-6352A/VRC: RNCC: 5 | RNVC: 2
A3132625-1: RNCC: 5 | RNVC: 9

14 Jul 1989

5975-01-303-4239
Electrical Components Tie Down Strap

013034239
PLT12EH: RNCC: 3 | RNVC: 2
6V7555: RNCC: 3 | RNVC: 2

30 Jun 1989

5975-01-302-9605
Stuffing Tube

013029605
001-008906-283: RNCC: 3 | RNVC: 2

22 Jun 1989

5975-01-301-8620
Junction Box Cover

013018620
1552AS558-1: RNCC: 3 | RNVC: 2
97151: RNCC: 5 | RNVC: 2

4 Jun 1989

5975-01-301-8130
Cable Strain Relief Bushing

013018130
200532-01: RNCC: 3 | RNVC: 2
200532-01: RNCC: 5 | RNVC: 9

3 Jun 1989

5975-01-301-6289
Electrical Conduit Adapter

013016289
E950FE: RNCC: 3 | RNVC: 9
00034481062233: RNCC: 5 | RNVC: 9

2 Jun 1989

5975-01-300-5032
Electrical Tie Down Mounting Base

013005032
201457-001: RNCC: 3 | RNVC: 2
90-10019: RNCC: 5 | RNVC: 9

15 May 1989

5975-01-299-6327
Junction Box Cover

012996327
3240-AL: RNCC: 3 | RNVC: 2
3240-AL: RNCC: 5 | RNVC: 2

4 May 1989

5975-01-299-3433
Electrical Equipment Mounting Base

012993433
236110-2: RNCC: 3 | RNVC: 2
706A35-402-139: RNCC: 5 | RNVC: 2
236110-2: RNCC: 5 | RNVC: 2
MT-6678/ARS-6(V): RNCC: 5 | RNVC: 2
D6003057: RNCC: 5 | RNVC: 2

30 Apr 1989

5975-01-296-9662
Electrical Box Connector

012969662
2282: RNCC: 3 | RNVC: 2
BS-72101: RNCC: D | RNVC: 9

26 Mar 1989

5975-01-291-6981
Electrical Equipment Rack

012916981
SM-D-805151: RNCC: 3 | RNVC: 2

4 Jan 1989

5975-01-290-4699
Electrical Grounding Plate

012904699
SN100FA: RNCC: 3 | RNVC: 2
1339AS981-1: RNCC: 5 | RNVC: 9

10 Dec 1988

5975-01-290-1617
Electrical Conduit Elbow

012901617
61DC: RNCC: 3 | RNVC: 9
173G: RNCC: 5 | RNVC: 2
6-5021: RNCC: 5 | RNVC: 9
5863: RNCC: 5 | RNVC: 9
265-E: RNCC: 5 | RNVC: 9

7 Dec 1988

5975-01-288-6594
Electrical Conduit Coupling Nut

012886594
705267: RNCC: 3 | RNVC: 2

11 Nov 1988

5975-01-282-8798
Interior Cable Rack

012828798
VD4802-00-0000: RNCC: 3 | RNVC: 2
D-329: RNCC: 5 | RNVC: 9

24 Jul 1988

5975-01-280-5371
Whip Ring Guy

012805371
755017B0778: RNCC: 3 | RNVC: 2

12 Jun 1988

5975-01-280-4620
Junction Box

012804620
389: RNCC: 3 | RNVC: 2
567: RNCC: 3 | RNVC: 2

10 Jun 1988

5975-01-277-3512
Gearbox Assembly

012773512
C-81815-1: RNCC: 3 | RNVC: 2

20 Apr 1988

5975-01-270-7361
Conduit Outlet

012707361
FSC1: RNCC: 3 | RNVC: 2

12 Jan 1988

5975-01-269-9392
Junction Box

012699392
LT-11: RNCC: 3 | RNVC: 9
2IH3-1: RNCC: 5 | RNVC: 2
LT-11: RNCC: 5 | RNVC: 2

24 Dec 1987

5975-01-269-5258
Electrical Box Connector

012695258
7480V: RNCC: 3 | RNVC: 2

18 Dec 1987

5975-01-268-6487
Junction Box

012686487
259: RNCC: 3 | RNVC: 2
5-SDW-1 1/4: RNCC: 3 | RNVC: 2
4SJD-1-1/4: RNCC: 3 | RNVC: 2
72171-1 1/4: RNCC: 5 | RNVC: 2

4 Dec 1987

5975-01-267-0282
Junction Box

012670282
ASE6X6X4: RNCC: 3 | RNVC: 2

4 Nov 1987

5975-01-265-2697
Cable Strain Relief Bushing

012652697
1150: RNCC: 3 | RNVC: 2

11 Oct 1987

5975-01-263-9309
Junction Box

012639309
EFSC150-2023: RNCC: 3 | RNVC: 2
7461K11: RNCC: 5 | RNVC: 9

22 Sep 1987

5975-01-262-4514
Difuser Filter Mount

012624514
B1-010-13: RNCC: 3 | RNVC: 2
NAVAL REPAIR PART: RNCC: 5 | RNVC: 1

29 Aug 1987

5975-01-261-9783
Electrical Tie Down Mounting Base

012619783
MCEH-S25-C0: RNCC: 3 | RNVC: 2
MCEH-S25-C0: RNCC: 5 | RNVC: 2
MCEH-S25-0: RNCC: 5 | RNVC: 2
MCEH-S25-C0: RNCC: 5 | RNVC: 2
127-0740-001: RNCC: 5 | RNVC: 2

20 Aug 1987

5975-01-258-8153
Electrical Wall Plate

012588153
731: RNCC: 3 | RNVC: 2

8 Jul 1987

5975-01-253-7061
Internal Corner Coupling

012537061
G-4017TC: RNCC: 3 | RNVC: 2

23 Apr 1987

5975-01-252-2954
Junction Box

012522954
13217E2366-1: RNCC: 3 | RNVC: 2
13217E2366-1: RNCC: 3 | RNVC: 9
13217E2366-1: RNCC: 5 | RNVC: 9

1 Apr 1987

5975-01-251-6753
Junction Box Cover

012516753
30501: RNCC: 3 | RNVC: 2

22 Mar 1987

5975-01-249-3506
Electrical Components Tie Down Strap

012493506
SSC2S-S6-0: RNCC: 3 | RNVC: 2
5033672-0005: RNCC: 7 | RNVC: 9

11 Feb 1987

5975-01-248-2961
Cable Hanger

012482961
0N332810-1: RNCC: 3 | RNVC: 2

22 Jan 1987

5975-01-247-7346
Interconnecting Box

012477346
A3041680: RNCC: 3 | RNVC: 2
A3041680: RNCC: 5 | RNVC: 2

11 Jan 1987

5975-01-246-8101
Junction Box

012468101
521511/23/4-30: RNCC: 3 | RNVC: 2
4-SW-SPL: RNCC: 5 | RNVC: 1
52151-1-2-3-4: RNCC: 5 | RNVC: 9

19 Dec 1986

5975-01-244-3413
Insulator Clamp

012443413
1349-21: RNCC: 3 | RNVC: 2

10 Nov 1986

5975-01-240-2306
Stuffing Tube Adapter

012402306
3AA041XA1624AA: RNCC: 3 | RNVC: 2
2869120-3: RNCC: 7 | RNVC: 2

11 Sep 1986

5975-01-235-1962
Electrical Equipment Mounting Base

012351962
A3014053-1: RNCC: 3 | RNVC: 2
MT-6353/VRC: RNCC: 5 | RNVC: 2

26 Jun 1986

5975-01-234-2169
Cable Splicing Kit

012342169
8427-16: RNCC: 3 | RNVC: 2
7100010774: RNCC: 5 | RNVC: 2
8407-16: RNCC: 5 | RNVC: 9

11 Jun 1986

5975-01-231-5196
Rigid Nonmetallic Conduit

012315196
49411-010: RNCC: 3 | RNVC: 9
49411-010 2IN SCHD 80 PRIM COND: RNCC: 5 | RNVC: 2
33512: RNCC: 5 | RNVC: 9
A53CA11: RNCC: 5 | RNVC: 9
49411: RNCC: 5 | RNVC: 9

29 Apr 1986

5975-01-229-8672
Conduit Outlet

012298672
E986L: RNCC: 3 | RNVC: 9
00034881065490: RNCC: 5 | RNVC: 9
00034481065494: RNCC: 5 | RNVC: 9

6 Apr 1986

5975-01-228-1236
Electrical Conduit Adapter

012281236
E943L: RNCC: 3 | RNVC: 9
E943L: RNCC: 5 | RNVC: 2
00034481062080: RNCC: 5 | RNVC: 9

14 Mar 1986

5975-01-221-5929
Wiring Duct Cover

012215929
C.75LG6: RNCC: 3 | RNVC: 2
890518-0928: RNCC: 5 | RNVC: 2
890518-0928: RNCC: 5 | RNVC: 9

1 Dec 1985

5975-01-220-7901
Electrical Equipment Mounting Base

012207901
A3014052-1: RNCC: 3 | RNVC: 2
MT-6429/VRC: RNCC: 5 | RNVC: 2

19 Nov 1985

5975-01-219-4496
Interconnecting Box

012194496
625B-246: RNCC: 3 | RNVC: 2
625B-246: RNCC: 3 | RNVC: 9
102 430 402: RNCC: 5 | RNVC: 1
SE-625B14-50: RNCC: 5 | RNVC: 2
NE-625B1-50: RNCC: 5 | RNVC: 9
A0251373: RNCC: 5 | RNVC: 9
SE-625B14-50: RNCC: 5 | RNVC: 9
102 430 402: RNCC: 5 | RNVC: 9
A0251373: RNCC: 5 | RNVC: 9
102-430-402: RNCC: 5 | RNVC: 9

26 Oct 1985

5975-01-212-5830
Outlet Cap

012125830
BP29W: RNCC: 3 | RNVC: 2
800-12777: RNCC: 5 | RNVC: 9

14 Jul 1985

5975-01-207-5533
Metallic Raceway

012075533
LD210: RNCC: 3 | RNVC: 2
AB-22120HWK: RNCC: 5 | RNVC: 2
LD210: RNCC: 5 | RNVC: 9

2 May 1985

5975-01-205-6343
Electrical Equipment Mounting Base

012056343
980-17285-12: RNCC: 3 | RNVC: 2

10 Apr 1985

5975-01-171-4790
Interconnecting Box

011714790
12285757: RNCC: 3 | RNVC: 2

8 Feb 1984

5975-01-157-8140
Electrical Equipment Mounting Base

011578140
16VE253002-1: RNCC: 3 | RNVC: 2
00-046-01: RNCC: 5 | RNVC: 2
00-046-01: RNCC: 5 | RNVC: 9

12 Jul 1983

5975-01-129-4157
Electrical-Electronic Equipment Chassis

011294157
SM-D-413528: RNCC: 3 | RNVC: 2
SM-D-413528: RNCC: 5 | RNVC: 2
413528: RNCC: 5 | RNVC: 2
SM-D-413528: RNCC: 5 | RNVC: 9
SM-D-413528: RNCC: C | RNVC: 1

5 Apr 1982

5975-01-129-3274
Conduit Outlet Cover

011293274
60CM75: RNCC: 3 | RNVC: 2

5 Apr 1982

5975-01-126-9863
Electrical Equipmea2zzyty Mounting Base

011269863
12272195: RNCC: 3 | RNVC: 2

21 Feb 1982

5975-01-126-0178
Junction Box

011260178
635-9644-001: RNCC: 3 | RNVC: 2

5 Feb 1982

5975-01-126-0020
Electrical Wall Plate

011260020
SS703: RNCC: 3 | RNVC: 2
S703: RNCC: 5 | RNVC: 9
9354: RNCC: 5 | RNVC: 9

5 Feb 1982

5975-01-105-8880
Flexible Metal Conduit

011058880
AA55810-00204: RNCC: 2 | RNVC: 2
A-A-55810: RNCC: 4 | RNVC: 1
WWC-566: RNCC: 5 | RNVC: 9

7 Jan 1981

5975-01-105-8253
Raceway Channell End

011058253
G1020: RNCC: 3 | RNVC: 2

5 Jan 1981

5975-01-105-6804
Electrical Box Connector

011056804
SE0-21: RNCC: 3 | RNVC: 2
2200: RNCC: 5 | RNVC: 2
CGY241: RNCC: 5 | RNVC: 9
SE-751: RNCC: 5 | RNVC: 9
CGYCGY241: RNCC: 5 | RNVC: 9
CGY241: RNCC: 5 | RNVC: 9

2 Jan 1981

5975-01-105-6822
Raceway End Reducing Connector

011056822
G3089E: RNCC: 3 | RNVC: 2

2 Jan 1981

5975-01-105-6805
Conduit Outlet

011056805
TA75-M: RNCC: 3 | RNVC: 2

2 Jan 1981

5975-01-091-6161
Electrical Conductor Bushing

010916161
2800: RNCC: 3 | RNVC: 2
358-0599-00: RNCC: 5 | RNVC: 2
358-0599-00: RNCC: 5 | RNVC: 2
B187-125: RNCC: 5 | RNVC: 9

11 Mar 1980

5975-01-085-0438
Conduit Outlet Cover

010850438
1FA: RNCC: 3 | RNVC: 2

28 Oct 1979

5975-01-047-0587
Electrical-Electronic Equipment Chassis

010470587
755017A3900: RNCC: 3 | RNVC: 2
755017A3900: RNCC: 5 | RNVC: 2
A12522: RNCC: 5 | RNVC: 2
75517A3900: RNCC: 5 | RNVC: 2
755017A3900: RNCC: 5 | RNVC: 9

28 Aug 1977

5975-01-045-9683
Junction Box Cover

010459683
13215E9893: RNCC: 3 | RNVC: 2

10 Aug 1977

5975-01-041-8297
Conduit Outlet

010418297
LL38 AND 380F: RNCC: 3 | RNVC: 2
LL-100-M AND K100-CM: RNCC: 5 | RNVC: 2
LL-100 AND BC-100G: RNCC: 5 | RNVC: 9

1 Jun 1977

5975-01-041-3621
Conduit Outlet Cover

010413621
FSK-1VTS-A: RNCC: 3 | RNVC: 2
DS128: RNCC: 3 | RNVC: 2

23 May 1977

5975-01-039-9750
Electrical Box Connector

010399750
2439: RNCC: 3 | RNVC: 2
AS 70319: RNCC: 5 | RNVC: 1
2439: RNCC: 5 | RNVC: 9
WT 6862-6: RNCC: 5 | RNVC: 9
SE-1004: RNCC: 5 | RNVC: 9

28 Apr 1977

5975-01-038-4851
Junction Box Cover

010384851
RSL5: RNCC: 3 | RNVC: 2

7 Apr 1977

5975-01-037-8929
Electrical Box Connector

010378929
C22: RNCC: 3 | RNVC: 2
7226V: RNCC: 5 | RNVC: 2
E40-300: RNCC: E | RNVC: 8

26 Mar 1977

5975-01-036-9578
Electrical Components Tie Down Strap

010369578
MS3368-1-2B: RNCC: 2 | RNVC: 2
AS33681: RNCC: 5 | RNVC: 1
AS23190: RNCC: 5 | RNVC: 1
MS3368-1-2B: RNCC: 5 | RNVC: 1
MIL-S-23190: RNCC: 5 | RNVC: 9
MS3368-1-2B: RNCC: 5 | RNVC: 9
AS23190: RNCC: 5 | RNVC: 9
AS33681: RNCC: 5 | RNVC: 9

10 Mar 1977

5975-01-036-7522
Electrical Tie Down Mounting Base

010367522
TM3S10-C: RNCC: 3 | RNVC: 2
SMNY-002NA: RNCC: 3 | RNVC: 2
SM-10: RNCC: 5 | RNVC: 2
CTM310: RNCC: 5 | RNVC: 2
867094-0006: RNCC: 5 | RNVC: 9

5 Mar 1977

5975-01-035-7704
Clamp Cable

010357704
755090A0666-1: RNCC: 3 | RNVC: 9

14 Feb 1977

5975-01-035-4386
Electrical Equipment Rack

010354386
JSIX-64S: RNCC: 3 | RNVC: 2
DM-2410: RNCC: 5 | RNVC: 1
CI-273: RNCC: 5 | RNVC: 1
BP2313: RNCC: 5 | RNVC: 1
JS1X-64S: RNCC: 5 | RNVC: 9
1500-0121-1: RNCC: 5 | RNVC: 9
DM-2410: RNCC: 5 | RNVC: 9
CI-273: RNCC: 5 | RNVC: 9
A-1406: RNCC: 5 | RNVC: 9

10 Feb 1977

5975-01-034-2266
Electrical Tie Down Mounting Base

010342266
868140-0001: RNCC: 3 | RNVC: 2
868140-0001: RNCC: 5 | RNVC: 9

21 Jan 1977

5975-01-033-9759
Transit Stay Plate

010339759
M24705/1SA: RNCC: 2 | RNVC: 2
M24705: RNCC: 4 | RNVC: 1
ALUMINUM STAY PLATE: RNCC: 5 | RNVC: 9
ALUMINUM STAY PLATE: RNCC: 5 | RNVC: 9
CC530967: RNCC: 5 | RNVC: 9

15 Jan 1977

5975-01-032-4639
Rigid Metal Conduit

010324639
UL 1242: RNCC: 3 | RNVC: 1
ANSI UL1242: RNCC: 3 | RNVC: 1
3IN. SIZE IMC: RNCC: 5 | RNVC: 9
WW-C-581: RNCC: 5 | RNVC: 9

15 Dec 1976

5975-01-032-4637
Rigid Metal Conduit

010324637
UL 1242: RNCC: 3 | RNVC: 1
ANSI UL1242: RNCC: 3 | RNVC: 1
WW-C-581: RNCC: 5 | RNVC: 9
2IN. SIZE IMC: RNCC: 5 | RNVC: 9

15 Dec 1976

5975-01-032-4638
Rigid Metal Conduit

010324638
UL 1242: RNCC: 3 | RNVC: 1
ANSI UL6: RNCC: 3 | RNVC: 1
WW-C-581: RNCC: 5 | RNVC: 9
2 1/2IN. SIZE IMC: RNCC: 5 | RNVC: 9

15 Dec 1976

5975-01-032-4632
Rigid Metal Conduit

010324632
UL 1242: RNCC: 3 | RNVC: 1
ANSI UL6: RNCC: 3 | RNVC: 1
WW-C-581: RNCC: 5 | RNVC: 9
1/2IN. SIZE IMC: RNCC: 5 | RNVC: 9

15 Dec 1976

5975-01-032-4636
Rigid Metal Conduit

010324636
ANSI UL1242: RNCC: 3 | RNVC: 1
UL 1242: RNCC: 3 | RNVC: 1
WW-C-581: RNCC: 5 | RNVC: 9
1 1/2IN. SIZE IMC: RNCC: 5 | RNVC: 9

15 Dec 1976

5975-01-032-3761
Nonmetallic Conduit Raceway Cover

010323761
C2DG6: RNCC: 3 | RNVC: 2

14 Dec 1976

5975-01-030-0989
Metallic Raceway

010300989
G4000B-10: RNCC: 3 | RNVC: 1
G-4000B: RNCC: 5 | RNVC: 9
12423626-010: RNCC: 7 | RNVC: 2
12423626: RNCC: D | RNVC: 9

27 Oct 1976

5975-01-028-9413
Conduit Outlet Cover

010289413
FS-2-DCS: RNCC: 3 | RNVC: 9
FSK-2DR: RNCC: 5 | RNVC: 2
DRF-2: RNCC: 5 | RNVC: 9
77C721210P006: RNCC: 7 | RNVC: 9

13 Oct 1976

5975-01-027-3273
Junction Box

010273273
AA59214-2: RNCC: 2 | RNVC: 2
A-A-59214: RNCC: 4 | RNVC: 1
SC BOX 12X12X4: RNCC: 5 | RNVC: 1
WJ800: RNCC: 5 | RNVC: 9

16 Sep 1976

5975-01-027-3274
Junction Box

010273274
SC BOX 6X6X3: RNCC: 3 | RNVC: 2
ESCB663PK: RNCC: 5 | RNVC: 2
17690: RNCC: 5 | RNVC: 9

16 Sep 1976

5975-01-025-8155
Electrical Conduit Bend

010258155
ANSI UL797: RNCC: 3 | RNVC: 1
MS75023-11: RNCC: 5 | RNVC: 9
2.00-90DEGRIGIDELBOW: RNCC: E | RNVC: 8
40006: RNCC: E | RNVC: 8

11 Aug 1976

5975-01-023-1584
End Cap

010231584
4-DC: RNCC: 3 | RNVC: 9
4-MEC: RNCC: 5 | RNVC: 9
4-DC: RNCC: 5 | RNVC: 9
4-MEC: RNCC: 5 | RNVC: 9
4-MEC: RNCC: 5 | RNVC: 9
4-MEC: RNCC: 5 | RNVC: 9

12 Jun 1976

5975-01-022-8469
Electrical Wall Plate

010228469
92102: RNCC: 3 | RNVC: 2
P-82-I: RNCC: C | RNVC: 1

6 Jun 1976

5975-01-022-7577
Conduit Outlet

010227577
FDT1: RNCC: 3 | RNVC: 2

5 Jun 1976

5975-01-022-1299
Electrical Box Connector

010221299
PK-250: RNCC: 3 | RNVC: 9

25 May 1976

5975-01-022-0014
Conduit Chase Nipple

010220014
SM-A-751505-1: RNCC: 3 | RNVC: 2
CN-600: RNCC: 3 | RNVC: 9
956: RNCC: 5 | RNVC: 9

24 May 1976

5975-01-020-9176
Cable Hanger

010209176
RTD2680: RNCC: 3 | RNVC: 1
101-107-060: RNCC: 3 | RNVC: 2
1162: RNCC: 3 | RNVC: 2
2070: RNCC: 5 | RNVC: 9
1162: RNCC: 5 | RNVC: 9
010-352: RNCC: 5 | RNVC: 9

7 May 1976

5975-01-020-5023
Electrical Wall Plate

010205023
70151: RNCC: 3 | RNVC: 2
S724: RNCC: 5 | RNVC: 9

30 Apr 1976

5975-01-020-4730
Junction Box

010204730
Z56-80-48: RNCC: 3 | RNVC: 2
Z56-80-48: RNCC: 5 | RNVC: 9

30 Apr 1976

5975-01-020-1178
Fixture Nipple

010201178
G972 1/2: RNCC: 3 | RNVC: 2

25 Apr 1976

5975-01-017-7379
Hanger

010177379
HS402: RNCC: 3 | RNVC: 2

12 Mar 1976

5975-01-017-5968
Nail-Up Strap

010175968
2252: RNCC: 3 | RNVC: 2
333: RNCC: 5 | RNVC: 9
03700: RNCC: 5 | RNVC: 9
202-104: RNCC: 5 | RNVC: 9
920-NS: RNCC: 5 | RNVC: 9
250: RNCC: 5 | RNVC: 9

11 Mar 1976

5975-01-016-4650
Duct Elbow

010164650
LDB890L: RNCC: 3 | RNVC: 2
LD88L: RNCC: 5 | RNVC: 9
LD88L: RNCC: 5 | RNVC: 9

12 Feb 1976

5975-01-016-3428
Conduit Outlet

010163428
LB50T-M: RNCC: 3 | RNVC: 2
LB17-MT: RNCC: 5 | RNVC: 2
LBE-50: RNCC: 5 | RNVC: 9
LB17-MT: RNCC: 5 | RNVC: 9

8 Feb 1976

5975-01-016-1805
Raceway Conduit Connector

010161805
G-976: RNCC: 3 | RNVC: 2

5 Feb 1976

5975-01-016-1775
Junction Box

010161775
10-10-6SC: RNCC: 3 | RNVC: 2

5 Feb 1976

5975-01-016-1685
Conduit Outlet

010161685
LB18: RNCC: 3 | RNVC: 2

5 Feb 1976

5975-01-016-0880
Grounding Clamp

010160880
GC003: RNCC: 3 | RNVC: 2
G0003: RNCC: 5 | RNVC: 9
13219E3929: RNCC: 7 | RNVC: 2

4 Feb 1976

5975-01-015-7660
Electrical-Electronic Equipment Chassis

010157660
16861: RNCC: 3 | RNVC: 9
16861: RNCC: 5 | RNVC: 2
16861: RNCC: 5 | RNVC: 2
16861: RNCC: 5 | RNVC: 9
16861: RNCC: 5 | RNVC: 9

27 Jan 1976

5975-01-015-1284
Electrical Box Connector

010151284
CES-4: RNCC: 3 | RNVC: 2

15 Jan 1976

5975-01-014-9929
Stuffing Tube

010149929
M24235/17-004: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1

13 Jan 1976

5975-01-014-9100
Suspension Clamp

010149100
J1096: RNCC: 3 | RNVC: 2
S521740: RNCC: 5 | RNVC: 9
DJ2C7: RNCC: 5 | RNVC: 9
7903: RNCC: 5 | RNVC: 9
5269: RNCC: 5 | RNVC: 9
S7145: RNCC: 5 | RNVC: 9
S-3418: RNCC: 5 | RNVC: 9

8 Jan 1976

5975-01-014-7145
Blank Panel

010147145
LBP-40: RNCC: 3 | RNVC: 9
2605144-2: RNCC: 7 | RNVC: 2

2 Jan 1976

5975-01-014-7136
Conduit Outlet Cover

010147136
989: RNCC: 3 | RNVC: 2

2 Jan 1976

5975-01-014-7132
Electrical Conduit Elbow

010147132
LBY45: RNCC: 3 | RNVC: 2

2 Jan 1976

5975-01-013-0289
Junction Box

010130289
601: RNCC: 3 | RNVC: 2
CXWOW: RNCC: 5 | RNVC: 2
384D: RNCC: 5 | RNVC: 2
CXW: RNCC: 5 | RNVC: 9
CXW: RNCC: 5 | RNVC: 9

22 Nov 1975

5975-01-012-7444
Junction Box

010127444
A10R104: RNCC: 3 | RNVC: 2

18 Nov 1975

5975-01-012-6204
Electrical Conduit Adapter

010126204
J595-1812-2.5A-4: RNCC: 3 | RNVC: 2
7902622-02: RNCC: 5 | RNVC: 2
J595-1812-2.5-4: RNCC: 5 | RNVC: 9
J595-1812-2504: RNCC: 5 | RNVC: 9
5935PL0902651: RNCC: 6 | RNVC: 9

15 Nov 1975

5975-01-012-5643
Junction Box

010125643
A10R86: RNCC: 3 | RNVC: 2

14 Nov 1975

5975-01-011-0820
Electrical Conduit Adapter

010110820
10684037-36: RNCC: 1 | RNVC: 2
6060-20-171-15: RNCC: 3 | RNVC: 2

12 Oct 1975

5975-01-011-0376
Electrical Conduit Coupling Nut Clamp

010110376
13217E9335-1: RNCC: 3 | RNVC: 2
ABG0704: RNCC: 5 | RNVC: 9

12 Oct 1975

5975-01-011-0004
Conduit Outlet

010110004
2906: RNCC: 3 | RNVC: 2
2906: RNCC: 5 | RNVC: 9

12 Oct 1975

5975-01-010-8942
Electrical Equipment Mounting Base

010108942
1546261-1: RNCC: 3 | RNVC: 2
1546261-1: RNCC: 3 | RNVC: 9
1546261-1: RNCC: 5 | RNVC: 2
1546261-1: RNCC: 5 | RNVC: 9

9 Oct 1975

5975-01-010-8919
Flexible Nonmetallic Conduit

010108919
17-C-18035-40: RNCC: 3 | RNVC: 2
7801: RNCC: 5 | RNVC: 9
5401: RNCC: 5 | RNVC: 9
HH-T-791: RNCC: 5 | RNVC: 9
683: RNCC: 5 | RNVC: 9
LOOM 3/16 ID: RNCC: 5 | RNVC: 9

9 Oct 1975

5975-01-010-6235
Electrical Conduit Adapter

010106235
10684037-18: RNCC: 1 | RNVC: 2
6060-12-081-15: RNCC: 3 | RNVC: 2

3 Oct 1975

5975-01-010-5950
Electrical Components Tie Down Strap

010105950
TYR-505: RNCC: 3 | RNVC: 2
TYR505: RNCC: 5 | RNVC: 2
TYR-5: RNCC: 5 | RNVC: 9

2 Oct 1975

5975-01-010-2953
Junction Box

010102953
ASE10X8X4: RNCC: 3 | RNVC: 2

25 Sep 1975

5975-01-009-8531
Blank Panel

010098531
5060-8762: RNCC: 3 | RNVC: 9
5060-8762: RNCC: 5 | RNVC: 9
5060-0797: RNCC: 5 | RNVC: 9
MX8610U: RNCC: 5 | RNVC: 9
5060-0797: RNCC: 5 | RNVC: 9
5060-0797: RNCC: C | RNVC: 1
5060-8762: RNCC: C | RNVC: 1

17 Sep 1975

5975-01-009-8152
Electrical Equipment Mounting Base

010098152
138186: RNCC: 3 | RNVC: 2

17 Sep 1975

5975-01-009-7677
Conduit Hub

010097677
3930: RNCC: 3 | RNVC: 2
G-50H: RNCC: 5 | RNVC: 9

15 Sep 1975

5975-01-009-5749
Junction Box

010095749
ASE18X18X6: RNCC: 3 | RNVC: 2
AB-18186SB: RNCC: 3 | RNVC: 2
ESCB-18186: RNCC: 5 | RNVC: 9

13 Sep 1975

5975-01-009-5617
Electrical Entrance Cap

010095617
1548: RNCC: 3 | RNVC: 2
08200: RNCC: 5 | RNVC: 9
191: RNCC: 5 | RNVC: 9
1220: RNCC: 5 | RNVC: 9
1752: RNCC: 5 | RNVC: 9
26-125: RNCC: 5 | RNVC: 9
913: RNCC: 5 | RNVC: 9

13 Sep 1975

5975-01-009-3706
Slip-On Terminator

010093706
PAT1701: RNCC: 3 | RNVC: 2

9 Sep 1975

5975-01-008-6759
Electrical Conduit Bushing

010086759
BUC400: RNCC: 3 | RNVC: 2
1286: RNCC: 5 | RNVC: 9
3-400: RNCC: 5 | RNVC: 9
CB-60: RNCC: 5 | RNVC: 9

29 Aug 1975

5975-01-007-9748
Electrical Cable Nipple

010079748
639374: RNCC: 3 | RNVC: 2
639374: RNCC: 3 | RNVC: 9
639374: RNCC: 5 | RNVC: 9

15 Aug 1975

5975-01-007-9570
Cable Support

010079570
3323913: RNCC: 3 | RNVC: 2

15 Aug 1975

5975-01-007-6078
Cable Strain Relief Bushing

010076078
822: RNCC: 3 | RNVC: 2
822: RNCC: 5 | RNVC: 9

9 Aug 1975

5975-01-007-3498
Electrical-Electronic Equipment Chassis

010073498
113916: RNCC: 3 | RNVC: 2

2 Aug 1975

5975-01-007-0209
Junction Box

010070209
AB-884SB: RNCC: 3 | RNVC: 2
ASE8X8X4: RNCC: 3 | RNVC: 2
A-SE8X8X4: RNCC: 3 | RNVC: 2
SC884G: RNCC: 5 | RNVC: 9
8X8X4SC: RNCC: 5 | RNVC: 9
ESCB-884GK: RNCC: 5 | RNVC: 9

26 Jul 1975

5975-01-006-5517
Electrical Equipment Cabinet

010065517
CU-622-A: RNCC: 3 | RNVC: 2
CU-622: RNCC: 5 | RNVC: 9
736-3612: RNCC: 5 | RNVC: 9

18 Jul 1975

5975-01-005-9489
Electrical-Electronic Equipment Chassis

010059489
332161: RNCC: 3 | RNVC: 2
332161: RNCC: 3 | RNVC: 9
332161: RNCC: 5 | RNVC: 2
332161: RNCC: 5 | RNVC: 9

13 Jul 1975

5975-01-005-7582
Strain Electrical Conductor Clamp

010057582
203432-1: RNCC: 3 | RNVC: 2

4 Jul 1975

5975-01-005-5102
Electrical-Electronic Equipment Chassis

010055102
332181: RNCC: 3 | RNVC: 2
332181: RNCC: C | RNVC: 1

25 Jun 1975

5975-01-004-5251
Blank Panel

010045251
BACP10U0225B: RNCC: 3 | RNVC: 2

10 Jun 1975

5975-01-004-1988
Electrical Entrance Cap

010041988
SH-101: RNCC: 3 | RNVC: 2
1251: RNCC: 5 | RNVC: 9
25100: RNCC: 5 | RNVC: 9
ECO-100: RNCC: 5 | RNVC: 9

29 May 1975

5975-01-004-1535
Electrical Box Connector

010041535
5259: RNCC: 3 | RNVC: 2
5259: RNCC: 5 | RNVC: 9
4Q-9300: RNCC: 5 | RNVC: 9
ST-90300: RNCC: 5 | RNVC: 9
2-300: RNCC: 5 | RNVC: 9
LT-30090: RNCC: 5 | RNVC: 9
12-300: RNCC: 5 | RNVC: 9

26 May 1975

5975-01-004-1143
Electrical Equipment Drawer

010041143
SD-1407-4493: RNCC: 3 | RNVC: 9
DD-1980: RNCC: 5 | RNVC: 2

22 May 1975

5975-01-004-0955
Conduit Hub

010040955
B125: RNCC: 3 | RNVC: 2
B125: RNCC: 5 | RNVC: 2

21 May 1975

5975-01-003-5258
Junction Box Seal

010035258
65550-11011-105: RNCC: 3 | RNVC: 2
65550-11011-105: RNCC: 8 | RNVC: 2

28 Apr 1975

5975-01-003-4896
Electrical Wall Plate

010034896
S992: RNCC: 3 | RNVC: 2

25 Apr 1975

5975-00-999-9388
Bridle Ring

009999388
SC-B-441873: RNCC: 3 | RNVC: 2

1 Apr 1966

5975-00-999-7420
Cast A Junction Box

009997420
804011: RNCC: 3 | RNVC: 2
804011: RNCC: 5 | RNVC: 2
SMD414989: RNCC: D | RNVC: 9

16 Mar 1966

5975-00-999-3017
Junction Box Cover

009993017
523337: RNCC: 3 | RNVC: 2
545777: RNCC: 3 | RNVC: 9
545777: RNCC: 5 | RNVC: 9
HD11491-2: RNCC: 5 | RNVC: 9
545777: RNCC: C | RNVC: 1

14 Mar 1966

5975-00-998-9517
Electrical Conduit Adapter

009989517
RE21SA: RNCC: 3 | RNVC: 2
RE21SA: RNCC: 3 | RNVC: 9
RB75-50A: RNCC: 5 | RNVC: 1
45267-213: RNCC: 5 | RNVC: 9
RE21SA: RNCC: 5 | RNVC: 9
42593-213: RNCC: C | RNVC: 1

6 Dec 1967

5975-00-998-1358
Cabl Mounting Plate

009981358
660623: RNCC: 3 | RNVC: 2

16 Nov 1966

5975-00-997-4766
Interconnecting Box

009974766
757-1537-002: RNCC: 3 | RNVC: 2

8 Nov 1966

5975-00-997-3301
Beam Anchor Clamp

009973301
P2676: RNCC: 3 | RNVC: 2
B-751: RNCC: 5 | RNVC: 2

11 Apr 1967

5975-00-996-9153
Blank Panel

009969153
9084835: RNCC: 3 | RNVC: 2

6 Apr 1967

5975-00-995-5697
Electrical Box Connector

009955697
9995496: RNCC: 3 | RNVC: 2
NC490: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-995-2854
Electrical Conduit Adapter

009952854
E1110-355-13: RNCC: 3 | RNVC: 2
738761-08: RNCC: 7 | RNVC: 2

8 Apr 1967

5975-00-994-5645
Blank Panel

009945645
204-075-266-35: RNCC: 3 | RNVC: 2
204-075-266-35: RNCC: 5 | RNVC: 1
204-075-266-35: RNCC: 5 | RNVC: 1
204-075-266-35: RNCC: 5 | RNVC: 1
204-075-266-35: RNCC: 5 | RNVC: 1
204-075-266-35: RNCC: 5 | RNVC: 1
204-075-266-35: RNCC: 5 | RNVC: 1
204-075-266-35: RNCC: 5 | RNVC: 1
204-075-266-35: RNCC: 5 | RNVC: 2

30 Mar 1967

5975-00-994-5648
Blank Panel

009945648
204-075-266-045: RNCC: 3 | RNVC: 2
204-075-266-45: RNCC: 5 | RNVC: 9

30 Mar 1967

5975-00-993-9779
Electrical Equipment Cabinet

009939779
CR1743MG: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-00-993-1117
Conduit Outlet

009931117
GUAX47: RNCC: 3 | RNVC: 2
GRX125: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-992-8375
Chassis Base

009928375
51869: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-992-5333
Electrical Equipment Mounting Base

009925333
G6775-022-01: RNCC: 3 | RNVC: 2
MT-2840/APN-153(V): RNCC: 5 | RNVC: 2
G6775-022: RNCC: 5 | RNVC: 9
G6775-022-01: RNCC: 5 | RNVC: 9
G6775-022: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-992-3589
Splice Valve

009923589
P-1B: RNCC: 3 | RNVC: 9
P1: RNCC: 5 | RNVC: 9
P-1B: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-989-7416
Electrical Conduit Elbow

009897416
EL69: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-988-8689
Conduit Outlet

009888689
GUAT49: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-987-5352
Junction Box

009875352
5438-1: RNCC: 3 | RNVC: 2
BJ4F: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-986-6186
Electrical Equipment Rack

009866186
FR 127A: RNCC: 3 | RNVC: 2
FR127A: RNCC: 5 | RNVC: 2
4650: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-984-5793
Electrical Conductor Bushing

009845793
5M13-32: RNCC: 3 | RNVC: 2

26 Oct 1966

5975-00-984-4317
Metallic Raceway

009844317
LD62: RNCC: 3 | RNVC: 2
LD62: RNCC: 5 | RNVC: 9

24 Oct 1966

5975-00-984-3048
Electrical Box Connector

009843048
CT5301: RNCC: 3 | RNVC: 2
P100174: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-982-7461
Raceway End Fitting

009827461
G-3018AE: RNCC: 3 | RNVC: 2
3018A: RNCC: 5 | RNVC: 9
3018AE: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-982-2297
Conduit Outlet Cover

009822297
DS1282: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-981-0365
Electrical Conduit Ferrule

009810365
8724266: RNCC: 3 | RNVC: 2
8724226: RNCC: 5 | RNVC: 2
10-90290-114: RNCC: 5 | RNVC: 2
10-90290-114: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-979-6528
Wire Clip

009796528
3000WC: RNCC: 3 | RNVC: 2
SC-C-681537: RNCC: D | RNVC: 9

1 Jan 1962

5975-00-978-5224
Plate Closing

009785224
LD2CP: RNCC: 3 | RNVC: 2
LD2CP: RNCC: 5 | RNVC: 9

7 Oct 1966

5975-00-978-5221
Connector

009785221
LD2C: RNCC: 3 | RNVC: 2
11253170-2: RNCC: 5 | RNVC: 2
LD2C: RNCC: 5 | RNVC: 9

7 Oct 1966

5975-00-978-5225
Wireway Tee

009785225
LD-2T: RNCC: 3 | RNVC: 2
LD-2T: RNCC: 5 | RNVC: 9

7 Oct 1966

5975-00-978-2291
Rigid Metal Conduit

009782291
204-070-037-5: RNCC: 3 | RNVC: 2
204-070-037-005: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-976-4848
Electrical Wall Plate

009764848
3391: RNCC: 3 | RNVC: 2
94229: RNCC: 5 | RNVC: 2

12 Oct 1966

5975-00-976-4262
Electrical Equipment Shelf

009764262
P-HD-SL-BS-2419: RNCC: 3 | RNVC: 2
DEE051475-4262-4: RNCC: 5 | RNVC: 2
BS2419: RNCC: 5 | RNVC: 9

12 Oct 1966

5975-00-975-4665
Blank Panel

009754665
PA1112HG: RNCC: 3 | RNVC: 2
PA1112MG: RNCC: 3 | RNVC: 9
6686LH: RNCC: 5 | RNVC: 2
CP-001-90-122: RNCC: 5 | RNVC: 2
AL112: RNCC: 5 | RNVC: 2
PA1112LG: RNCC: 5 | RNVC: 9
H6686: RNCC: E | RNVC: 8

1 Jan 1962

5975-00-975-0930
Conduit Outlet

009750930
AA50563-207ACCCC: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
FSC1-100: RNCC: 5 | RNVC: 1
FSC3: RNCC: 5 | RNVC: 1
FSC-100: RNCC: 5 | RNVC: 9
WC586: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-975-0919
Conduit Outlet

009750919
GRN50: RNCC: 3 | RNVC: 2
GUAN16: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-975-0922
Conduit Outlet

009750922
GUAT47: RNCC: 3 | RNVC: 2
GRT125: RNCC: 5 | RNVC: 2
VTT44404: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-973-9568
Electrical Conduit Bushing

009739568
B-300: RNCC: 3 | RNVC: 9
B300: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-972-8028
Ground Rod

009728028
D9576-53-2: RNCC: 3 | RNVC: 2
D9576-53-2: RNCC: 5 | RNVC: 2
9576-53-2: RNCC: 5 | RNVC: 2
9576-53-2: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-971-8840
Electrical-Electronic Equipment Chassis

009718840
CU3015A: RNCC: 3 | RNVC: 9

1 Jan 1962

5975-00-971-0319
Blank Panel

009710319
170056: RNCC: 3 | RNVC: 9
170056: RNCC: 5 | RNVC: 9
170056: RNCC: 5 | RNVC: 9

25 Sep 1966

5975-00-968-3306
Conduit Outlet

009683306
FDA1: RNCC: 3 | RNVC: 2
FDA-1-50: RNCC: 5 | RNVC: 9
FDA-1-50: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-968-3286
Conduit Outlet

009683286
LBD8800: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-967-9877
Internal Raceway Elbow

009679877
5711LH: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-965-8996
Blank Panel

009658996
549-3790-003: RNCC: 3 | RNVC: 2
549-3790-003: RNCC: 5 | RNVC: 1
549-3790-003: RNCC: 5 | RNVC: 2

6 Jun 1966

5975-00-965-8998
Blank Panel

009658998
549-3791-003: RNCC: 3 | RNVC: 2
549-3791-003: RNCC: 5 | RNVC: 2

6 Jun 1966

5975-00-965-8982
Blank Panel

009658982
757-0477-001: RNCC: 3 | RNVC: 2
757-0477-001: RNCC: 5 | RNVC: 2
757-0477-001: RNCC: 5 | RNVC: 9

6 Jun 1966

5975-00-964-6673
Adapter Floor Duct

009646673
1126A1: RNCC: 3 | RNVC: 9

27 May 1966

5975-00-964-3400
Blank Panel

009643400
544-8558-002: RNCC: 3 | RNVC: 2

3 Jun 1966

5975-00-964-3036
Electrical Entrance Cap

009643036
F50: RNCC: 3 | RNVC: 2

1 Jan 1962

5975-00-961-5206
Junction Box

009615206
G3028: RNCC: 3 | RNVC: 2
7716C17H01: RNCC: C | RNVC: 1

1 Jan 1962

5975-00-935-2163
Electrical Conductor Bushing

009352163
SB1093-15: RNCC: 3 | RNVC: 2
655636: RNCC: 5 | RNVC: 9
077-003712-042: RNCC: 7 | RNVC: 2

3 Apr 1968

5975-00-892-9879
Conduit Outlet

008929879
AA50563-101ALLBF: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
W-C-586: RNCC: 5 | RNVC: 9
AA50563-1-1-XX-LB-2.00: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-892-9880
Conduit Outlet

008929880
AA50563-101ALLRA: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
W-C-586: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-892-9868
Conduit Outlet

008929868
A-A-50563: RNCC: 4 | RNVC: 1
W-C-586: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-880-3142
Blank Panel

008803142
PA1107BT, MG, OR WH: RNCC: 3 | RNVC: 2
ARP-1219: RNCC: 3 | RNVC: 2
PWHA-16: RNCC: 5 | RNVC: 1
6681LH: RNCC: 5 | RNVC: 2
PA1107HG: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-832-6887
Electrical Equipment Mounting Base

008326887
SC-D-595513: RNCC: 3 | RNVC: 2
MT-3874/V: RNCC: 5 | RNVC: 2
DL-SC-B-595512: RNCC: 5 | RNVC: 2
SC-D-446171: RNCC: 5 | RNVC: 9

13 Mar 1967

5975-00-804-1489
Conduit Outlet Cover

008041489
LD4CP: RNCC: 3 | RNVC: 2
LD4CP: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-803-0160
Switch Terminal Cover

008030160
5PA3: RNCC: 3 | RNVC: 2
7459794P1: RNCC: 5 | RNVC: 2
7459794P1: RNCC: 5 | RNVC: 2
5PA3: RNCC: 5 | RNVC: 2
5PA3: RNCC: 5 | RNVC: 2
131-1-175: RNCC: 5 | RNVC: 9
5PA3: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-781-9812
Junction Box

007819812
58371V1/2-25: RNCC: 3 | RNVC: 2
9009992501: RNCC: 5 | RNVC: 2
104FB: RNCC: 5 | RNVC: 2
202A: RNCC: 5 | RNVC: 2
58371V1-2: RNCC: 5 | RNVC: 9
678: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-701-5266
Cable Clamp

007015266
7C1-12: RNCC: 3 | RNVC: 2
7C1-12: RNCC: 5 | RNVC: 1
711698-005: RNCC: 5 | RNVC: 1
GC500BD12: RNCC: 7 | RNVC: 1

1 Jan 1963

5975-00-685-9545
Blank Panel

006859545
PS1251MG: RNCC: 3 | RNVC: 2
74B10067S: RNCC: 3 | RNVC: 2
101200-3: RNCC: 5 | RNVC: 2
PS1251HG: RNCC: 5 | RNVC: 9
RI-013-023: RNCC: 5 | RNVC: 9
PS-1251 LG: RNCC: 5 | RNVC: 9
9002-006 SIZE B: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-682-0560
Electrical Wall Plate

006820560
ANSI UL514A: RNCC: 3 | RNVC: 1
W-P-455: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-681-4725
Raceway U Bushing

006814725
502: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-681-0991
Electrical-Electronic Equipment Chassis

006810991
AC-420: RNCC: 3 | RNVC: 2
9002-440: RNCC: 5 | RNVC: 9
CB773: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-669-9471
Electrical Box Connector

006699471
RSR-110: RNCC: 3 | RNVC: 2
DB-10: RNCC: 3 | RNVC: 2
7106754P4: RNCC: 3 | RNVC: 2
ZX-10: RNCC: 5 | RNVC: 9
13213E4405-5: RNCC: 7 | RNVC: 2
CM-1210: RNCC: E | RNVC: 8
RCG110: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-665-3158
Electrical Conduit Coupling

006653158
AA50553-1-2-K-01-S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
WF408: RNCC: 5 | RNVC: 9
FEDSTD156: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-581-8122
Junction Box

005818122
AA59214-4C12: RNCC: 2 | RNVC: 2
A-A-59214: RNCC: 4 | RNVC: 1
LC0W: RNCC: 5 | RNVC: 1
388: RNCC: 5 | RNVC: 1
230LC: RNCC: 5 | RNVC: 1
471: RNCC: 5 | RNVC: 9
WJ800: RNCC: 5 | RNVC: 9
4S: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-538-5115
Electrical Equipment Cabinet

005385115
CY597AG: RNCC: 3 | RNVC: 2
0100040: RNCC: 5 | RNVC: 1
N16C10639-2872: RNCC: 5 | RNVC: 2
RE23J250G: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-536-3993
Raceway Coupling

005363993
5701: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-518-0187
Junction Box

005180187
5747-2: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-410-6172
Stuffing Tube Plug

004106172
M24231/28-002: RNCC: 4 | RNVC: 1
MIL-C-24231/28-002: RNCC: 4 | RNVC: 1
9000S6202-73980-51043A: RNCC: 5 | RNVC: 1
9000S6202-73980-51043AL1: RNCC: 5 | RNVC: 2
MIL-C-24231/28-002L1: RNCC: 5 | RNVC: 2

20 Aug 1969

5975-00-393-1269
Clamp Assembly

003931269
S0C60471: RNCC: 3 | RNVC: 2
S0C60471: RNCC: 3 | RNVC: 9
S0C66471: RNCC: 5 | RNVC: 9
S0C66471: RNCC: 5 | RNVC: 9
S0C66471: RNCC: 5 | RNVC: 9
SC-C-66471: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-370-1839
Electrical-Electronic Equipment Chassis

003701839
152538: RNCC: 3 | RNVC: 2
152538: RNCC: 5 | RNVC: 9
152538: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-370-1515
Chassis Base

003701515
152575: RNCC: 3 | RNVC: 9
152575: RNCC: 5 | RNVC: 2
152575: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-355-4754
Stuffing Tube Plug

003554754
9000S6202F73937SIZEK: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-340-2697
Lacing Tape

003402697
26HBLACK: RNCC: 3 | RNVC: 9
26HBLACK: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-339-0948
Deadend Clamp

003390948
5152: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-339-0947
Deadend Clamp

003390947
5151: RNCC: 3 | RNVC: 9

1 Jan 1963

5975-00-337-0448
Conduit Outlet

003370448
AA50563-207ASSSA: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
FSS1: RNCC: 5 | RNVC: 1
6176663: RNCC: 5 | RNVC: 1
675072: RNCC: 5 | RNVC: 9
FSS-50: RNCC: 5 | RNVC: 9
WC586: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-335-2588
Flexible Nonmetallic Conduit

003352588
UL 3 SIZE 1/4: RNCC: 3 | RNVC: 2
LOOM 1/4 ID: RNCC: 3 | RNVC: 9
06174AB: RNCC: 5 | RNVC: 9
HHT791: RNCC: 5 | RNVC: 9
8376125: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-329-4443
Pipe Connector

003294443
5782: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-325-9032
Electrical Equipment Mounting Base

003259032
MT1719AR: RNCC: 3 | RNVC: 2
505-2782-002: RNCC: 5 | RNVC: 2
350D3: RNCC: 5 | RNVC: 9
505-2782-002: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-325-1816
Blank Panel

003251816
154439: RNCC: 3 | RNVC: 2
154439: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-325-1814
Blank Panel

003251814
154437: RNCC: 3 | RNVC: 2
55080308-000: RNCC: 5 | RNVC: 9
154437: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-325-1781
Plate

003251781
153602: RNCC: 3 | RNVC: 2
153602: RNCC: 5 | RNVC: 9
153602: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-322-8480
Flat Elbow

003228480
211: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-319-5034
Junction Box Extension

003195034
V5747: RNCC: 3 | RNVC: 2
5747: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-319-5033
Junction Box Extension

003195033
5751: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-319-0698
Electrical Cable Protector

003190698
751-332-004-603: RNCC: 3 | RNVC: 2
12869: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-317-4782
Blank End Fitting

003174782
2110B: RNCC: 3 | RNVC: 2
10044616: RNCC: D | RNVC: 9
0099-3-3039: RNCC: D | RNVC: 9

1 Jan 1963

5975-00-296-6991
Conduit Outlet

002966991
AA50563-101ALLBJ: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
LB97: RNCC: 5 | RNVC: 1
LB350-M: RNCC: 5 | RNVC: 1
LB69: RNCC: 5 | RNVC: 9
WC586: RNCC: 5 | RNVC: 9
15708: RNCC: 5 | RNVC: 9
480-112-M: RNCC: 5 | RNVC: 9
LB-350G: RNCC: 5 | RNVC: 9
70-353: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-296-7009
Flexible Metal Conduit

002967009
MILC6136: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-296-6989
Raceway Box Connector

002966989
5781: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-296-4577
Junction Box

002964577
5748-2: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-296-4100
Stuffing Tube

002964100
F1836M TYPE-3-010: RNCC: 3 | RNVC: 9
F1836M: RNCC: 5 | RNVC: 1
TYPE-1-010: RNCC: 5 | RNVC: 2
MILS19622-1: RNCC: 5 | RNVC: 9
M19622-1-010: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-296-3079
Electrical Box Connector

002963079
AN3061-12: RNCC: 2 | RNVC: 2
AN3061-12: RNCC: 5 | RNVC: 1
148-12: RNCC: 5 | RNVC: 1
22-12-12: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-00-296-1600
Electrical Box Connector

002961600
RSR-1007: RNCC: 3 | RNVC: 2
DB-3: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-296-0537
Electrical Conduit Locknut

002960537
AN3066-28: RNCC: 2 | RNVC: 2
AN3066: RNCC: 4 | RNVC: 1
789802P10: RNCC: 5 | RNVC: 1
AN3066-28: RNCC: 5 | RNVC: 1
6-2-28: RNCC: 5 | RNVC: 1
6-2-28: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-295-9868
Electrical Conduit Coupling Nut

002959868
10-40458-10S: RNCC: 3 | RNVC: 2
6730405: RNCC: 5 | RNVC: 2
6730405: RNCC: 5 | RNVC: 2
10-37669: RNCC: E | RNVC: 8
10-37669: RNCC: E | RNVC: 8
10-37669: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-295-8715
Strain Electrical Conductor Clamp

002958715
PR1: RNCC: 3 | RNVC: 9
AT7408: RNCC: 5 | RNVC: 9
AT7408: RNCC: 5 | RNVC: 9
PR6: RNCC: 5 | RNVC: 9
PRS6: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-295-8713
Electrical Conduit Nipple

002958713
ANSI UL6: RNCC: 3 | RNVC: 1
1-2X1 1-2INLGSH0RT: RNCC: 3 | RNVC: 9
UL STD UL-6: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-292-3250
Conduit Outlet

002923250
JBDX50L: RNCC: 3 | RNVC: 2
WC586: RNCC: 5 | RNVC: 9

19 Sep 1973

5975-00-285-6079
Flexible Metal Conduit

002856079
175-0500: RNCC: 3 | RNVC: 2
A-A-52440-1B-5: RNCC: 4 | RNVC: 1
MIL-C-13909: RNCC: 5 | RNVC: 9
175-0500: RNCC: 5 | RNVC: 9

9 Sep 1973

5975-00-285-0454
Electrical Conduit Nipple

002850454
ANSI UL6A: RNCC: 3 | RNVC: 1
WWC581: RNCC: 5 | RNVC: 9
UL STD 6A: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-284-7340
Flexible Nonmetallic Conduit

002847340
ANSI UL3: RNCC: 3 | RNVC: 1
1480FX59: RNCC: 5 | RNVC: 2
HHT791: RNCC: 5 | RNVC: 9
UL 3: RNCC: 5 | RNVC: 9
1480FX59: RNCC: 5 | RNVC: 9
LOOM 3/4 ID: RNCC: 5 | RNVC: 9
LOOM 3/4 ID: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-284-7339
Flexible Nonmetallic Conduit

002847339
ANSI UL3: RNCC: 3 | RNVC: 1
UL 3 SIZE 1/2: RNCC: 3 | RNVC: 2
R1-593: RNCC: 3 | RNVC: 9
LOOM 1/2 ID: RNCC: 5 | RNVC: 9
HHT791A: RNCC: 5 | RNVC: 9
FLEXTUBE1-2: RNCC: 5 | RNVC: 9
HHT791: RNCC: 5 | RNVC: 9
R1-593: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-284-6370
Electrical Cable Nipple

002846370
166-105: RNCC: 3 | RNVC: 2
166B105: RNCC: 3 | RNVC: 2
0100113: RNCC: 3 | RNVC: 2
YD12: RNCC: 3 | RNVC: 2
02YD12: RNCC: 5 | RNVC: 9
471361: RNCC: 5 | RNVC: 9
609086: RNCC: 5 | RNVC: 9
066424: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-284-6285
Junction Box Cover

002846285
473: RNCC: 3 | RNVC: 2
128TYPE8SIZEUSTYLE53: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-284-6099
Electrical Conduit Adapter

002846099
AN3055-32-20: RNCC: 2 | RNVC: 2
AN3055-32-20: RNCC: 5 | RNVC: 1
276-1106P50: RNCC: 5 | RNVC: 1
2360-069010-10-0: RNCC: 5 | RNVC: 2
2360-069010-10-0: RNCC: 5 | RNVC: 2
AN3055-32-20: RNCC: 5 | RNVC: 2
2360-069010-10-0: RNCC: 5 | RNVC: 2
AN3055-32-20: RNCC: 5 | RNVC: 9
AN3055-32-20: RNCC: 5 | RNVC: 9
276-1106P50: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-281-0055
Junction Box Cover

002810055
AA59214-8B8: RNCC: 2 | RNVC: 2
A-A-59214: RNCC: 4 | RNVC: 1
8409: RNCC: 5 | RNVC: 1
54C48: RNCC: 5 | RNVC: 9
FEDSTD128: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-9182
Knockout Reducing Washer

002809182
8168659: RNCC: 3 | RNVC: 2
3713: RNCC: 5 | RNVC: 2
13409: RNCC: 5 | RNVC: 9
1454-D: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-8570
Electrical Conduit Union

002808570
WF406: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-280-8478
Electrical Conduit Coupling

002808478
XK241: RNCC: 3 | RNVC: 2
530-DC: RNCC: 5 | RNVC: 9
676: RNCC: 5 | RNVC: 9
GX-50: RNCC: 5 | RNVC: 9

25 Aug 1973

5975-00-280-7543
Electrical Cable Nipple

002807543
13 RED AND BLACK: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-280-6039
Electrical Wall Plate

002806039
94072: RNCC: 3 | RNVC: 2
PD40-526: RNCC: 5 | RNVC: 9
PD40-526: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-5768
Electrical Conduit Ferrule

002805768
AN3051-6: RNCC: 2 | RNVC: 2

1 Jan 1963

5975-00-280-4313
Electrical Conduit Adapter

002804313
AN3056-8: RNCC: 2 | RNVC: 2
AN3056-8: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-00-280-4121
Junction Box

002804121
A-A-59214-2B10: RNCC: 2 | RNVC: 2
A-A-59214: RNCC: 4 | RNVC: 1
537020-1: RNCC: 5 | RNVC: 1
W-J-800: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-3974
Blank Panel

002803974
B6867GP3: RNCC: 3 | RNVC: 9
B6867GR3: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-3748
Electrical Entrance Cap

002803748
AA50563-627BG: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
WC586: RNCC: 5 | RNVC: 9
TYPE VI DESIGN 27 FORM2 2 1/2IN: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-3751
Electrical Entrance Cap

002803751
FB-707: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-280-3509
Wire Strand Hanger

002803509
MS39051: RNCC: 2 | RNVC: 2
8902: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-3508
Wire Strand Hanger

002803508
5063: RNCC: 3 | RNVC: 2
DJ2C7: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-280-3380
Electrical Box Connector

002803380
7288V: RNCC: 3 | RNVC: 2
8409556: RNCC: 5 | RNVC: 9
KC-51: RNCC: 5 | RNVC: 9
406: RNCC: 5 | RNVC: 9
10051676: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-3211
Electrical Conduit Nipple

002803211
UL 514B: RNCC: 3 | RNVC: 1
WW-C-581: RNCC: 5 | RNVC: 9
16224: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-280-3198
Electrical Conduit Nipple

002803198
ANSI UL6: RNCC: 3 | RNVC: 1
WWC581: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-280-3197
Electrical Conduit Nipple

002803197
ANSI UL6: RNCC: 3 | RNVC: 1
WWC581: RNCC: 5 | RNVC: 9
1184: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-280-3194
Electrical Conduit Nipple

002803194
ANSI UL6: RNCC: 3 | RNVC: 1
LS35066-04-16: RNCC: 3 | RNVC: 2
16243: RNCC: 5 | RNVC: 1
LS35066-04-16: RNCC: 5 | RNVC: 2
WWC581: RNCC: 5 | RNVC: 9
1-2X2INLGCL0SE: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-266-1986
Electrical Conduit Ferrule

002661986
AN3050-4: RNCC: 2 | RNVC: 2
AN3050: RNCC: 4 | RNVC: 1
213018-2: RNCC: 5 | RNVC: 9
7501-485757PC39: RNCC: 5 | RNVC: 9
11-0250P: RNCC: 5 | RNVC: 9
11-1-4: RNCC: 5 | RNVC: 9
11-0250P: RNCC: 5 | RNVC: 9
11-1-4: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-266-2029
Electrical Conduit Ferrule

002662029
AN3052-6: RNCC: 2 | RNVC: 2
S1110752-6: RNCC: 5 | RNVC: 1
11-3-6: RNCC: 5 | RNVC: 1
S1110752-6: RNCC: 5 | RNVC: 9
11-3-6: RNCC: 5 | RNVC: 9
6005-9570-9: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-265-7494
Conduit Outlet

002657494
GUAT24: RNCC: 3 | RNVC: 2
GRJT75: RNCC: 5 | RNVC: 2
ST41D9-13: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-265-7491
Conduit Outlet

002657491
AA50563-520ACCCB: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
GUAC26: RNCC: 5 | RNVC: 1
TYPE V DESIGN 20 STYLE C: RNCC: 5 | RNVC: 9
WC586: RNCC: 5 | RNVC: 9
TYPE V DESIGN 23 STYLE C: RNCC: E | RNVC: 8
GUFC26: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-265-0661
External Raceway Elbow

002650661
718: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-265-0236
Internal Raceway Elbow

002650236
V518: RNCC: 3 | RNVC: 2
518: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-265-0237
Flat Raceway Elbow

002650237
V511: RNCC: 3 | RNVC: 2
511: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-265-0235
Internal Raceway Elbow

002650235
717: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-265-0021
Electrical Equipment Cabinet

002650021
3800: RNCC: 3 | RNVC: 2
C1798: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-264-5667
Clip Cable

002645667
712: RNCC: 3 | RNVC: 9
712: RNCC: 5 | RNVC: 9

4 Jul 1973

NSN 5975-00-263-1082 002631082 HOLDER,POLE STEP

5975-00-263-1082
Pole Step Holder

002631082
7235: RNCC: 3 | RNVC: 2
7235: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-262-9155
Crossarm Brace

002629155
MS39030-2: RNCC: 2 | RNVC: 2
MILH55053: RNCC: 5 | RNVC: 9
8028: RNCC: 5 | RNVC: 9
8028: RNCC: 5 | RNVC: 9
7028: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-255-6095
Cable Spacer

002556095
AT7640: RNCC: 3 | RNVC: 2
AT7640: RNCC: 3 | RNVC: 9
AT7396B: RNCC: 5 | RNVC: 2
A7396B: RNCC: 5 | RNVC: 9
AT7396B: RNCC: 5 | RNVC: 9
AT7640: RNCC: 5 | RNVC: 9
AT7396B: RNCC: 5 | RNVC: 9
AT7640D: RNCC: 5 | RNVC: 9
AT7640D: RNCC: 5 | RNVC: 9
6908: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-255-2187
Electrical Box Connector

002552187
CG100125: RNCC: 3 | RNVC: 2
DB-14118-L: RNCC: E | RNVC: 8
327767-45: RNCC: E | RNVC: 8
327767-45: RNCC: E | RNVC: 8

24 Jun 1973

5975-00-253-9743
Blank Panel

002539743
SCC83370: RNCC: 3 | RNVC: 2
PA3106HG: RNCC: E | RNVC: 8
T19-101532-187: RNCC: E | RNVC: 8
9A3226: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-252-0197
Electrical Box Connector

002520197
STA1: RNCC: 3 | RNVC: 9
41E7A1-2: RNCC: 5 | RNVC: 2
STA1: RNCC: 5 | RNVC: 9
D46B: RNCC: 5 | RNVC: 9
STA1: RNCC: C | RNVC: 1

28 Feb 1969

5975-00-250-6763
Electrical Conduit Ferrule

002506763
AN3051-3: RNCC: 3 | RNVC: 2
AN3051-3: RNCC: 5 | RNVC: 2
B47A30: RNCC: 5 | RNVC: 2
11-2-3: RNCC: 5 | RNVC: 2
6026-1025-13: RNCC: 5 | RNVC: 9
6026-1040-5: RNCC: 5 | RNVC: 9
11-2-3: RNCC: 5 | RNVC: 9
6005-1564-6: RNCC: 5 | RNVC: 9
6005-4702-14: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-249-7878
Electrical Conduit Nipple

002497878
ANSI UL6: RNCC: 3 | RNVC: 1
WWC581: RNCC: 5 | RNVC: 9
WWC581B: RNCC: 5 | RNVC: 9
1-2X6INLG: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-249-6798
Ground Rod

002496798
8976942: RNCC: 3 | RNVC: 2
04271-0519: RNCC: 5 | RNVC: 1
MIL-R-11461: RNCC: 5 | RNVC: 9
MILR11461: RNCC: 5 | RNVC: 9
5975002496798: RNCC: 5 | RNVC: 9
04271-0519: RNCC: 5 | RNVC: 9
5975002496798: RNCC: 6 | RNVC: 9

19 Feb 1969

5975-00-248-8565
Strain Electrical Conductor Clamp

002488565
21LD: RNCC: 3 | RNVC: 9

1 Jan 1961

5975-00-248-8533
Strain Electrical Conductor Clamp

002488533
41LD: RNCC: 3 | RNVC: 9

1 Jan 1961

5975-00-248-5319
Insulator Bracket

002485319
J1300: RNCC: 3 | RNVC: 2
J1300: RNCC: 5 | RNVC: 9

15 Jun 1973

5975-00-248-2559
Junction Box

002482559
1542D: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-245-9575
Electrical Wall Plate

002459575
NP12: RNCC: 3 | RNVC: 2
91181: RNCC: 5 | RNVC: 2
P12X: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-245-1692
Conduit Outlet

002451692
AA50563-101ACCCD: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
C125M: RNCC: 5 | RNVC: 1
C47: RNCC: 5 | RNVC: 1
TYPE I DESIGN 1 STYLE C (1 1/4IN: RNCC: 5 | RNVC: 9
WC586: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-245-1734
Conduit Outlet

002451734
AA50563-207BEEEA: RNCC: 2 | RNVC: 2
FS-2-50: RNCC: 5 | RNVC: 1
FS-2-50: RNCC: 5 | RNVC: 9
W-C-586: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-245-1718
Conduit Outlet

002451718
AA50563-101ATBBB: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
WC586: RNCC: 5 | RNVC: 9
TYPE 1 DESIGN 1 STYLE TB: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-245-1730
Conduit Outlet

002451730
AA50563-207ALLLA: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
FSL1: RNCC: 5 | RNVC: 1
FSL-1-50: RNCC: 5 | RNVC: 1
TYPE II DESIGN 7 FORM STYLE LL: RNCC: 5 | RNVC: 9
WC586: RNCC: 5 | RNVC: 9
FSL-50: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-245-1715
Conduit Outlet

002451715
AA50563-207AAAAA: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
FSA-1-50: RNCC: 5 | RNVC: 1
FSA1: RNCC: 5 | RNVC: 1
8192127: RNCC: 5 | RNVC: 1
WC586: RNCC: 5 | RNVC: 9
FSA-50: RNCC: 5 | RNVC: 9
TYPE II DESIGN 7 FORM 1 STYLE A: RNCC: 5 | RNVC: 9
FSA1: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-245-1682
Conduit Outlet

002451682
AA50563-208AEEEA: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
WC586: RNCC: 5 | RNVC: 9
TYPE II DESIGN 8 STYLE E FORM 1: RNCC: 5 | RNVC: 9
FD1: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-243-3256
Electrical Conduit Adapter

002433256
AN3055-32-16: RNCC: 2 | RNVC: 2
00005-0001: RNCC: 5 | RNVC: 1
00005-0001: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-242-6427
Electrical Conduit Adapter

002426427
AN3055-14-4: RNCC: 2 | RNVC: 2

1 Jan 1963

5975-00-242-4627
Fanning Strip

002424627
S572102: RNCC: 3 | RNVC: 9
812: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-242-4620
Fanning Strip

002424620
S572100: RNCC: 3 | RNVC: 9
810: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-242-4276
Conduit Outlet

002424276
AA50563-520LAAC: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
GUAL36: RNCC: 5 | RNVC: 1
ST41D9-2: RNCC: 5 | RNVC: 9
WC586: RNCC: 5 | RNVC: 9
TYPE V DESIGN 20 STYLE L: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-241-6636
Electrical Cable Nipple

002416636
BU-26-0 BLACK: RNCC: 3 | RNVC: 2
BU-26-2 RED: RNCC: 3 | RNVC: 2

9 Jun 1973

5975-00-241-4127
Flexible Metal Conduit

002414127
MILC6136: RNCC: 4 | RNVC: 1
TYPE2SIZE3-16IN: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-241-4126
Flexible Metal Conduit

002414126
MILC6136: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-00-240-2763
Conduit Outlet

002402763
AA50563-101AEEEA: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
E50-M: RNCC: 5 | RNVC: 1
E17: RNCC: 5 | RNVC: 1
WC586: RNCC: 5 | RNVC: 9
E-50G: RNCC: 5 | RNVC: 9
TYPE 1 DESIGN 1 STYLE E: RNCC: 5 | RNVC: 9
E17: RNCC: 5 | RNVC: 9
70-52: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-240-2757
Conduit Outlet

002402757
AA50563-101AEEEB: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
E27: RNCC: 5 | RNVC: 1
E75-M: RNCC: 5 | RNVC: 1
WC586: RNCC: 5 | RNVC: 9
TYPE I DESIGN 1 STYLE E: RNCC: 5 | RNVC: 9
E27: RNCC: 5 | RNVC: 9
70-72: RNCC: 5 | RNVC: 9
E-75G: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-240-2733
Flat Raceway Elbow

002402733
1511: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-240-2732
Internal Raceway Elbow

002402732
1517: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-234-5182
Electrical Conduit Bend

002345182
UL6: RNCC: 3 | RNVC: 1
ANSI UL6: RNCC: 3 | RNVC: 1
MS75022-14: RNCC: 5 | RNVC: 9
WWC571AMEND2: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-234-4868
Blank Panel

002344868
6635: RNCC: 3 | RNVC: 2
6605: RNCC: 5 | RNVC: 1
PS1255MG OR WH: RNCC: 5 | RNVC: 2
RI-013-063: RNCC: 5 | RNVC: 9
PS-1255: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-233-6234
Electrical Cable Protector

002336234
6531: RNCC: 3 | RNVC: 2
7531: RNCC: 5 | RNVC: 9
6531: RNCC: 5 | RNVC: 9
792: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-232-7645
Conduit Outlet

002327645
AA50563-101BLLBG: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
LB777: RNCC: 5 | RNVC: 1
WC586: RNCC: 5 | RNVC: 9
TYPE 1 DESIGN 1 STYLE LB: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-226-6676
Electrical Cable Nipple

002266676
47: RNCC: 3 | RNVC: 1
8169301: RNCC: 5 | RNVC: 2
860-0093: RNCC: 5 | RNVC: 9
916B326-1: RNCC: 5 | RNVC: 9
916B326-1: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-225-5242
Conduit Chase Nipple

002255242
AA50553-3-1-T-1-06-C: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
WF408: RNCC: 5 | RNVC: 9
WF408-31T106M: RNCC: 5 | RNVC: 9

11 Jan 1968

5975-00-224-4620
Blank Panel

002244620
H6606: RNCC: 3 | RNVC: 2
MX509CP: RNCC: 5 | RNVC: 2
PS1256MG OR WH: RNCC: 5 | RNVC: 2
PS1256LG: RNCC: 5 | RNVC: 9
PS1256HG: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-223-9860
Underground Cable Rack

002239860
5B9026: RNCC: 3 | RNVC: 1
J5126: RNCC: 3 | RNVC: 2
5B9206: RNCC: 5 | RNVC: 9
2126: RNCC: 5 | RNVC: 9
1126: RNCC: 5 | RNVC: 9
619: RNCC: 5 | RNVC: 9
2126: RNCC: 5 | RNVC: 9
2126: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-223-1835
Cable Hanger

002231835
6693SIZE1: RNCC: 3 | RNVC: 9
6693SIZE1: RNCC: 5 | RNVC: 2
6693SIZE1: RNCC: 5 | RNVC: 9
1: RNCC: 5 | RNVC: 9
891: RNCC: 5 | RNVC: 9
6693SIZE1: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-221-7175
Conduit Outlet

002217175
EABT26: RNCC: 3 | RNVC: 2

4 May 1973

NSN 5975-00-214-9066 002149066 STRAP,TIE DOWN,ELECTRICAL COMPONENTS

5975-00-214-9066
Electrical Components Tie Down Strap

002149066
TY46MF4: RNCC: 3 | RNVC: 2
TY46MF4: RNCC: 5 | RNVC: 2
347C212H61: RNCC: 5 | RNVC: 2
347C212H61: RNCC: 5 | RNVC: 9
TY46MF4: RNCC: 5 | RNVC: 9

27 Apr 1973

5975-00-213-2330
Electrical Equipment Rack

002132330
400-11: RNCC: 3 | RNVC: 2
TLC4900-11: RNCC: 5 | RNVC: 2
400-11: RNCC: 5 | RNVC: 2
40011: RNCC: 5 | RNVC: 9
B92-04011: RNCC: 5 | RNVC: 9
1011U: RNCC: 5 | RNVC: 9
1011TYPE10: RNCC: 5 | RNVC: 9
92-000011: RNCC: 5 | RNVC: 9
8611: RNCC: 5 | RNVC: 9

25 Apr 1973

5975-00-212-6244
Electrical Bonding Ring

002126244
AN3111-9: RNCC: 2 | RNVC: 2
8192703: RNCC: 5 | RNVC: 1
7611100PT63: RNCC: 5 | RNVC: 1
7614260PT25: RNCC: 5 | RNVC: 1
CA 2250-9: RNCC: 5 | RNVC: 1
813145-9: RNCC: 5 | RNVC: 1
2250-9: RNCC: 5 | RNVC: 9
AN3111-9: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-209-1418
Conduit Outlet Cover

002091418
690: RNCC: 3 | RNVC: 2

15 Apr 1973

5975-00-208-6727
Conduit Outlet

002086727
LL29: RNCC: 3 | RNVC: 2

15 Apr 1973

5975-00-201-6306
Electrical Conduit Coupling

002016306
7127253-01: RNCC: 3 | RNVC: 9

31 Mar 1973

5975-00-197-0207
Conduit Outlet Cover

001970207
FSK-1VTS: RNCC: 3 | RNVC: 2
DS128F: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-194-8856
Junction Box

001948856
12SB: RNCC: 3 | RNVC: 9
A-A-59214: RNCC: 4 | RNVC: 1
W-J-800: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-194-8858
Junction Box

001948858
AA59214-IC8: RNCC: 2 | RNVC: 2
A-A-59214: RNCC: 4 | RNVC: 1
561L: RNCC: 5 | RNVC: 1
128TYPE1SIZEBSTYLE4: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-189-6023
Flexible Metal Conduit

001896023
BA10089-8: RNCC: 3 | RNVC: 2
177-0375: RNCC: 5 | RNVC: 2
177-0375: RNCC: 5 | RNVC: 9
B10089-8: RNCC: 5 | RNVC: 9
BA10089-8: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-189-0093
Electrical Cable Nipple

001890093
30397: RNCC: 3 | RNVC: 2
30397: RNCC: 3 | RNVC: 9

3 Mar 1971

5975-00-178-1213
Rigid Metal Conduit

001781213
UL STD-6: RNCC: 3 | RNVC: 1
ANSI UL6: RNCC: 3 | RNVC: 1
WW-C-581: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-177-8022
Metallic Raceway

001778022
LD63: RNCC: 3 | RNVC: 2
LD63: RNCC: 5 | RNVC: 9

18 Feb 1973

5975-00-177-2819
Electrical Conductor Bushing

001772819
2119: RNCC: 3 | RNVC: 2
1559AS299-1: RNCC: 5 | RNVC: 2
8612016-1: RNCC: 5 | RNVC: 2
150-0742-010: RNCC: 5 | RNVC: 9
UB875: RNCC: 5 | RNVC: 9

29 Oct 1969

5975-00-174-9125
Knockout Reducing Washer

001749125
3716: RNCC: 3 | RNVC: 2
3716: RNCC: 5 | RNVC: 1
CATAL0G3716: RNCC: 5 | RNVC: 9
13412: RNCC: 5 | RNVC: 9
1455-C: RNCC: 5 | RNVC: 9
RW200-100: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-171-1346
Electrical Tie Down Mounting Base

001711346
PM2H25M: RNCC: 3 | RNVC: 2
PM2H25M: RNCC: 5 | RNVC: 2
45003612-1: RNCC: 5 | RNVC: 9

27 Aug 1972

5975-00-168-8783
Ground Rod

001688783
GP2: RNCC: 3 | RNVC: 2
GP2: RNCC: 5 | RNVC: 9

27 Jan 1971

5975-00-167-2422
Electrical Conduit End Seal Cap

001672422
B075: RNCC: 3 | RNVC: 2
B075: RNCC: 5 | RNVC: 9

7 Feb 1973

5975-00-160-9222
Electrical Conduit Elbow

001609222
4291: RNCC: 3 | RNVC: 2
8-75IT: RNCC: 5 | RNVC: 9
182A-B: RNCC: 5 | RNVC: 9

3 Nov 1971

5975-00-158-8487
Conduit Outlet Cover

001588487
370: RNCC: 3 | RNVC: 2
BS-100: RNCC: 5 | RNVC: 9
SC-63: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-158-8485
Conduit Outlet Cover

001588485
670: RNCC: 3 | RNVC: 2
35080: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-156-3325
Insulator Bracket

001563325
468: RNCC: 3 | RNVC: 9
568: RNCC: 5 | RNVC: 9
568: RNCC: 5 | RNVC: 9

27 Mar 1970

5975-00-153-6386
Junction Box

001536386
AA59214-4A4: RNCC: 2 | RNVC: 2
A-A-59214: RNCC: 4 | RNVC: 1
W-J-800: RNCC: 5 | RNVC: 9
FED-STD-128: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-152-1137
Electrical Conduit Coupling

001521137
NEMA C80.1: RNCC: 3 | RNVC: 2
WW-C-581: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-152-1112
Electrical Conduit Bend

001521112
ANSI UL6: RNCC: 3 | RNVC: 1
UL6: RNCC: 3 | RNVC: 1
WW-C-581: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-152-1129
Electrical Conduit Coupling

001521129
ANSI UL514C: RNCC: 3 | RNVC: 1
WWC581: RNCC: 5 | RNVC: 9
BM11637-68: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-152-1113
Electrical Conduit Bushing

001521113
AA50553-31Q109S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
SP130: RNCC: 5 | RNVC: 1
BU350: RNCC: 5 | RNVC: 1
W-F-408: RNCC: 5 | RNVC: 9
416-112-M: RNCC: 5 | RNVC: 9
A-A-50553-III-I-Q-1-09-S: RNCC: 5 | RNVC: 9
11908: RNCC: 5 | RNVC: 9
FED-STD-156: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-152-1105
Electrical Conduit Bend

001521105
MS75022-5: RNCC: 2 | RNVC: 2
ANSI UL6: RNCC: 5 | RNVC: 1
WW-C-581: RNCC: 5 | RNVC: 9
ANSI UL514D: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-152-1107
Electrical Conduit Bend

001521107
ANSI UL6: RNCC: 3 | RNVC: 1
MS75022-13: RNCC: 4 | RNVC: 1
WWC581CAMEND2: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-152-1076
Electrical Conduit Bend

001521076
ANSI UL6: RNCC: 3 | RNVC: 1
WW-C-581: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-148-7162
Electrical Wall Plate

001487162
P8W: RNCC: 3 | RNVC: 2
88101W: RNCC: 5 | RNVC: 2
8248WHI: RNCC: 5 | RNVC: 9
88003HG: RNCC: 5 | RNVC: 9

19 Jun 1974

Load More Results