What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 113 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 113of 491

5975-00-669-9480
Electrical Conductor Bushing

006699480
BBL50: RNCC: 3 | RNVC: 9
1BL40: RNCC: 5 | RNVC: 9
MBV50L: RNCC: 5 | RNVC: 9
29321: RNCC: 5 | RNVC: 9
BBL50: RNCC: 5 | RNVC: 9
B12LN: RNCC: 5 | RNVC: 9
IBL40: RNCC: 5 | RNVC: 9
ABB50: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-669-9470
Electrical Box Connector

006699470
W-F-406: RNCC: 4 | RNVC: 1
924125-1: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-538-6260
Electrical Wall Plate

005386260
UL 514: RNCC: 3 | RNVC: 1
W-P-455: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-548-3932
Conduit Outlet Cover

005483932
DS32: RNCC: 3 | RNVC: 2
FSK1TS: RNCC: 5 | RNVC: 2
FS-1-SCS: RNCC: 5 | RNVC: 2
DS32: RNCC: 5 | RNVC: 2
FS-1-SCS: RNCC: 5 | RNVC: 2
DS32: RNCC: 5 | RNVC: 2
TSF: RNCC: 5 | RNVC: 9
FS-1-SCS: RNCC: 5 | RNVC: 9
DS32: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-661-1003
Electrical Conduit Coupling

006611003
AA50553-1-2-K-05-S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
95T150: RNCC: 5 | RNVC: 1
5520: RNCC: 5 | RNVC: 1
5520: RNCC: 5 | RNVC: 1
20804: RNCC: 5 | RNVC: 9
WF408: RNCC: 5 | RNVC: 9
FEDSTD156: RNCC: 5 | RNVC: 9
1014-S: RNCC: 5 | RNVC: 9
2926: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-553-3607
Conduit Outlet

005533607
AA50563-101ALAAA: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
WC586: RNCC: 5 | RNVC: 9
LL18: RNCC: E | RNVC: 8

1 Jan 1961

5975-00-578-2864
Cable Strain Relief Bushing

005782864
SR-3-P4: RNCC: 3 | RNVC: 2
1003566-01: RNCC: 5 | RNVC: 1
SR3L: RNCC: 5 | RNVC: 1
515452-8: RNCC: 5 | RNVC: 2
1003566-01: RNCC: 5 | RNVC: 9
10280870-2: RNCC: 7 | RNVC: 1
938: RNCC: E | RNVC: 8
938: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-588-0387
Electrical Conduit Bondnut

005880387
7358624: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-681-5856
Fanning Strip

006815856
364087-1: RNCC: 3 | RNVC: 2
364087-1: RNCC: 3 | RNVC: 2
364087-01: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-707-6245
Electrical Box Connector

007076245
STB45125: RNCC: 3 | RNVC: 2
5345: RNCC: 5 | RNVC: 2
LTB-12545: RNCC: 5 | RNVC: 2
4Q4125IT: RNCC: 5 | RNVC: 9
13-125B: RNCC: 5 | RNVC: 9
LTB-12545: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-619-7899
Electrical Tie Down Mounting Base

006197899
TA1S10-C: RNCC: 3 | RNVC: 2
CTAM-2: RNCC: 3 | RNVC: 2
1131913K00: RNCC: 5 | RNVC: 1
1218754-202: RNCC: 7 | RNVC: 2

20 Feb 1975

5975-00-777-5083
Conduit Outlet Cover

007775083
190: RNCC: 3 | RNVC: 2
SC-51: RNCC: 5 | RNVC: 9
20-50: RNCC: 5 | RNVC: 9
190: RNCC: 5 | RNVC: 9
SM-A-949318-101: RNCC: C | RNVC: 1

20 Mar 1968

5975-00-782-6141
Stuffing Tube

007826141
MIL-S-19622/4: RNCC: 4 | RNVC: 1
M19622-4-03: RNCC: 5 | RNVC: 1
M19622/4-03: RNCC: 5 | RNVC: 9
MIL-S-19622: RNCC: 5 | RNVC: 9
MILS19622D: RNCC: 5 | RNVC: 9

2 Feb 1968

5975-00-808-4068
Stuffing Tube

008084068
M19622-3-008: RNCC: 2 | RNVC: 2
MILS19622-3: RNCC: 4 | RNVC: 1

1 Jan 1962

5975-00-810-1190
Electrical Conduit Union

008101190
UNY305: RNCC: 3 | RNVC: 2
VCC-3: RNCC: 5 | RNVC: 2
UNY-100S: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-813-8652
Electrical Equipment Cabinet

008138652
A242010LP: RNCC: 3 | RNVC: 2
E242010: RNCC: 5 | RNVC: 9

23 Apr 1972

5975-00-825-5421
Electrical Equipment Cabinet

008255421
CU3002A: RNCC: 3 | RNVC: 2
AMC1002: RNCC: 5 | RNVC: 9
CU3002: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-825-6728
Electrical Box Connector

008256728
2564: RNCC: 3 | RNVC: 2
CGB5911: RNCC: 5 | RNVC: 1
CGB5911: RNCC: 5 | RNVC: 1
8528811: RNCC: 5 | RNVC: 1
SR15014: RNCC: 5 | RNVC: 9
6541: RNCC: 5 | RNVC: 9
DBZM5722: RNCC: E | RNVC: 8

1 Jan 1962

5975-00-826-4209
Electrical Conduit Union

008264209
UNF705: RNCC: 3 | RNVC: 2
UNF250R: RNCC: 5 | RNVC: 2
UNF-260: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-834-0568
Junction Box

008340568
A404LP: RNCC: 3 | RNVC: 2
AB-443JL: RNCC: 5 | RNVC: 1
B-443: RNCC: 5 | RNVC: 9

18 Sep 1967

5975-00-852-4786
Conduit Outlet

008524786
LB69: RNCC: 3 | RNVC: 2
OLB-6: RNCC: 5 | RNVC: 2

22 Nov 1966

5975-00-850-6805
Electrical Conduit Union

008506805
UNY605: RNCC: 3 | RNVC: 2
UNY200NR: RNCC: 5 | RNVC: 2
GUM-6: RNCC: 5 | RNVC: 2

1 Jan 1962

5975-00-926-0590
Electrical Box Connector

009260590
AA50552-001-4-M-M: RNCC: 2 | RNVC: 2
A-A-50552: RNCC: 4 | RNVC: 1
W-F-406: RNCC: 5 | RNVC: 9
WF406: RNCC: 5 | RNVC: 9

25 Dec 1965

5975-00-880-6237
Electrical-Electronic Equipment Chassis

008806237
CU3009A: RNCC: 3 | RNVC: 2
4020921-13: RNCC: 5 | RNVC: 2

1 Jan 1960

5975-00-880-9859
Electrical Box Connector

008809859
5357: RNCC: 3 | RNVC: 2
4Q9200IT: RNCC: 5 | RNVC: 9
LTB-20090: RNCC: 5 | RNVC: 9
75-606: RNCC: 5 | RNVC: 9
STB-90200: RNCC: 5 | RNVC: 9
4Q9200T: RNCC: 5 | RNVC: 9
12-200B: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-937-0415
Electrical Equipment Mounting Base

009370415
S1660-60034-009: RNCC: 3 | RNVC: 2
MT3785A: RNCC: 5 | RNVC: 2
EV4019: RNCC: 5 | RNVC: 2
S1660-60034-9: RNCC: 5 | RNVC: 9
790Y3: RNCC: 5 | RNVC: 9
761-0635-003: RNCC: 5 | RNVC: 9
MT3772AA: RNCC: C | RNVC: 1

2 Nov 1966

5975-00-951-0223
Conduit Outlet Cover

009510223
GUA09: RNCC: 3 | RNVC: 2
TE3636: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-956-1394
Clamp Right Angle

009561394
RC3-4: RNCC: 3 | RNVC: 2
RCS-3/4: RNCC: 5 | RNVC: 2
UBC-75: RNCC: 5 | RNVC: 9
962: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-980-2342
Electrical Conductor Bushing

009802342
1931783: RNCC: 3 | RNVC: 2
71166: RNCC: 5 | RNVC: 9
1931783: RNCC: 5 | RNVC: 9
32980: RNCC: 5 | RNVC: 9
1931783: RNCC: 5 | RNVC: 9
8H1144: RNCC: 5 | RNVC: 9
1931783: RNCC: 5 | RNVC: 9
1931783: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-01-003-6137
Fuse Box And Conduit

010036137
16730: RNCC: 3 | RNVC: 9

1 May 1975

5975-01-003-9803
Conduit Hub

010039803
B200: RNCC: 3 | RNVC: 2
B200: RNCC: 5 | RNVC: 9

15 May 1975

5975-01-011-5520
Blank Panel

010115520
9M381B2: RNCC: 3 | RNVC: 9
9M381B2: RNCC: 5 | RNVC: 1

23 Oct 1975

5975-01-017-5678
Electrical Conduit Union

010175678
GUF-2: RNCC: 3 | RNVC: 2
UNF205SA: RNCC: E | RNVC: 8

11 Mar 1976

5975-01-017-5681
Electrical Box Connector

010175681
CGB116-SA: RNCC: 3 | RNVC: 2
5-4-1605-8-25: RNCC: 5 | RNVC: 1
ZX-8: RNCC: 5 | RNVC: 9
DB-8: RNCC: E | RNVC: 8

11 Mar 1976

5975-01-020-9186
Cable Hanger

010209186
101-107-282: RNCC: 3 | RNVC: 2
0250: RNCC: 5 | RNVC: 2
9250: RNCC: 5 | RNVC: 2
RTD 7250: RNCC: 5 | RNVC: 9

7 May 1976

5975-01-014-9983
Stuffing Tube

010149983
M24235/17-098: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1
5975PL1241423: RNCC: 6 | RNVC: 9

13 Jan 1976

5975-01-038-4777
Electrical Cable Protector

010384777
30/18: RNCC: 3 | RNVC: 9
M24705: RNCC: 4 | RNVC: 1
30/18: RNCC: 5 | RNVC: 1
30/18: RNCC: 5 | RNVC: 9
30/18: RNCC: 5 | RNVC: 9
30/18: RNCC: 5 | RNVC: 9
30/18: RNCC: C | RNVC: 1

7 Apr 1977

5975-01-036-9575
Electrical Components Tie Down Strap

010369575
MS3368-1-0B: RNCC: 2 | RNVC: 2
MS3368-1-0B: RNCC: 5 | RNVC: 1
AS33681: RNCC: 5 | RNVC: 1
AS23190: RNCC: 5 | RNVC: 1
MIL-S-23190: RNCC: 5 | RNVC: 9
AS33681: RNCC: 5 | RNVC: 9
AS23190: RNCC: 5 | RNVC: 9
MS3368-1-0B: RNCC: 5 | RNVC: 9
MS3368-1-1B: RNCC: E | RNVC: 8
MS3368-1-6B: RNCC: E | RNVC: 8

10 Mar 1977

5975-01-038-0557
Electrical Tie Down Mounting Base

010380557
TC817: RNCC: 3 | RNVC: 2
0140422Q00: RNCC: 5 | RNVC: 2
4990096-1: RNCC: 5 | RNVC: 9
582R688H01: RNCC: 7 | RNVC: 2
582R688H01: RNCC: 7 | RNVC: 9

28 Mar 1977

5975-01-039-9747
Electrical Conduit Bushing

010399747
A-A-50552-0II: RNCC: 2 | RNVC: 2
A-A-50552: RNCC: 4 | RNVC: 1
13218E0003-100: RNCC: 5 | RNVC: 1
W-F-406: RNCC: 5 | RNVC: 9

28 Apr 1977

5975-01-045-3059
Electrical Equipment Shelf

010453059
DL1924FS: RNCC: 3 | RNVC: 2
RI-025: RNCC: 5 | RNVC: 9
DL1924FS: RNCC: 5 | RNVC: 9
DL1924FS: RNCC: 5 | RNVC: 9
BRA-1914: RNCC: 5 | RNVC: 9
SEE82350-2059: RNCC: 5 | RNVC: 9

29 Jul 1977

5975-01-055-5161
Electrical Conduit Coupling

010555161
5040: RNCC: 3 | RNVC: 2
20405: RNCC: 5 | RNVC: 9
735: RNCC: 5 | RNVC: 9
CP46: RNCC: 5 | RNVC: 9
5200S: RNCC: 5 | RNVC: 9
1035-S: RNCC: 5 | RNVC: 9
20405: RNCC: 5 | RNVC: 9
714626-6: RNCC: 7 | RNVC: 1

7 Feb 1978

5975-01-049-2200
Electrical Box Connector

010492200
5253AL: RNCC: 3 | RNVC: 2
00020-0129: RNCC: C | RNVC: 1

13 Oct 1977

5975-00-025-7936
Electrical Cable Nipple

000257936
8737843-11: RNCC: 1 | RNVC: 2
202A142-4: RNCC: 3 | RNVC: 2
GS830W4-4: RNCC: 5 | RNVC: 2
9317974-4: RNCC: 5 | RNVC: 9

17 Oct 1972

5975-00-042-7138
Electrical Box Connector

000427138
4241: RNCC: 3 | RNVC: 2
4241: RNCC: 5 | RNVC: 2
8075W-IT: RNCC: 5 | RNVC: 9
771B: RNCC: 5 | RNVC: 9
3073: RNCC: C | RNVC: 1
3073: RNCC: C | RNVC: 1

22 May 1968

5975-00-056-3576
Electrical Box Connector

000563576
5256: RNCC: 3 | RNVC: 1
3426: RNCC: 3 | RNVC: 2
ST90150: RNCC: 3 | RNVC: 2
5256: RNCC: 5 | RNVC: 2
4Q9150: RNCC: 5 | RNVC: 9
4Q9150: RNCC: 5 | RNVC: 9
LT-15090: RNCC: 5 | RNVC: 9
12-150: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-009-6256
Landing Cont Strut

000096256
A1201-1: RNCC: 3 | RNVC: 2
A1201-1: RNCC: 5 | RNVC: 2
6462274-1: RNCC: 5 | RNVC: 9
6462274-1: RNCC: 7 | RNVC: 2

4 Aug 1972

5975-00-058-7907
Cable Strain Relief Bushing

000587907
1060: RNCC: 3 | RNVC: 2
937: RNCC: 3 | RNVC: 2
937: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-068-2800
Flexible Metal Conduit Assembly

000682800
C223-0250-1708G3G6KC: RNCC: 3 | RNVC: 2

25 Jan 1972

5975-00-097-8098
Electrical Conduit Locknut

000978098
AA50553-III-1-P109-S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
FEDSTD156: RNCC: 5 | RNVC: 9
W-F-408: RNCC: 5 | RNVC: 9

29 May 1968

5975-00-011-2403
Junction Box

000112403
6000: RNCC: 3 | RNVC: 2
3000: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-020-3271
Rim Clamp

000203271
109074-537: RNCC: 3 | RNVC: 2
GC503E04EE37P: RNCC: 5 | RNVC: 2
16840-04-5-231: RNCC: 5 | RNVC: 2
42-14129A06: RNCC: 5 | RNVC: 9
10424-7: RNCC: 5 | RNVC: 9
10424-7: RNCC: 5 | RNVC: 9
414765-3: RNCC: 7 | RNVC: 2
12700303: RNCC: 7 | RNVC: 2
42-14129A06: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-020-5095
Junction Box

000205095
A-404CHRFI: RNCC: 3 | RNVC: 1
69C37523-1: RNCC: 7 | RNVC: 2

29 Apr 1967

5975-00-034-1302
Electrical Box Connector

000341302
HUB100: RNCC: 3 | RNVC: 2
372: RNCC: 5 | RNVC: 2
CH-100T: RNCC: 5 | RNVC: 9
40-100B: RNCC: 5 | RNVC: 9
CH-100IC: RNCC: 5 | RNVC: 9

2 May 1967

5975-00-052-4591
Conduit Outlet

000524591
AA50563-207ACCCA: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
FSC-1-50: RNCC: 5 | RNVC: 1
FSC-1-50: RNCC: 5 | RNVC: 9
W-C-586: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-086-1371
Switchbox Support

000861371
896: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-093-7731
Electrical Cable Nipple

000937731
HXUD000019: RNCC: 3 | RNVC: 2
66876-402-1: RNCC: 5 | RNVC: 9

6 Dec 1972

5975-00-097-6945
Stuffing Tube Packing Nut

000976945
200-503-113: RNCC: 3 | RNVC: 9

29 May 1968

5975-00-100-8707
Electrical Conduit Bushing

001008707
AA50553-3-1-Q-1-05-S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
FEDSTD156: RNCC: 5 | RNVC: 9
W-F-408: RNCC: 5 | RNVC: 9

3 Jun 1968

5975-00-100-8801
Electrical Conduit Coupling

001008801
AA50553-1-2-K-06-S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
W-F-408: RNCC: 5 | RNVC: 9
AA50553-I-1-A-06: RNCC: 5 | RNVC: 9
W-F-408 CL2KDKSZ2.000INTY1: RNCC: 5 | RNVC: 9
FED-STD 156: RNCC: 5 | RNVC: 9

29 May 1968

5975-00-008-1103
Special Cable Clamp

000081103
NX3: RNCC: 3 | RNVC: 2
PH-23801-6: RNCC: C | RNVC: 1

9 Jul 1972

5975-00-038-2358
Metallic Raceway

000382358
V700: RNCC: 3 | RNVC: 2
700: RNCC: 5 | RNVC: 2
700WIREM0LDRACEWAYSDWG7707929: RNCC: 5 | RNVC: 2
7707931: RNCC: 5 | RNVC: 2
700: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-020-5094
Junction Box

000205094
A1008CHRFI: RNCC: 3 | RNVC: 9
69C37523-3: RNCC: 7 | RNVC: 2

29 Apr 1967

5975-00-038-2308
Junction Box

000382308
V5760: RNCC: 3 | RNVC: 2
5760: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-003-5303
Electrical Components Tie Down Strap

000035303
PRT2S-C: RNCC: 3 | RNVC: 2
9396168: RNCC: 5 | RNVC: 1
RCV-200: RNCC: 5 | RNVC: 2
WIT-50RR: RNCC: 5 | RNVC: 9
260682-1: RNCC: 7 | RNVC: 1

26 May 1972

5975-00-051-7337
Blank Panel

000517337
AL1104: RNCC: 3 | RNVC: 1
QMPA196X: RNCC: 3 | RNVC: 1
T191633218T: RNCC: 3 | RNVC: 1
1001-042: RNCC: 3 | RNVC: 1
73B10017: RNCC: 3 | RNVC: 2
PA-1104MG: RNCC: 3 | RNVC: 2
H6678: RNCC: 5 | RNVC: 2
9A2400HG: RNCC: 5 | RNVC: 9
PA1104HG: RNCC: 5 | RNVC: 9
9002-564: RNCC: 5 | RNVC: 9

16 May 1967

5975-00-053-8771
Electrical Box Connector

000538771
CGBS2014: RNCC: 3 | RNVC: 2

1 Jan 1961

5975-00-058-5196
Conduit Outlet

000585196
LR58: RNCC: 3 | RNVC: 2
LR58: RNCC: 5 | RNVC: 9

13 Jun 1967

5975-00-064-1886
Electrical Conduit Elbow

000641886
PFFL50: RNCC: 3 | RNVC: 2
37450: RNCC: 5 | RNVC: 9
CE050: RNCC: 5 | RNVC: 9
PEL37450: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-087-0758
Flexible Metal Conduit

000870758
JIC-3/4: RNCC: 3 | RNVC: 2
47003: RNCC: 5 | RNVC: 9
3-4INTYPEEFSEALTITE: RNCC: 5 | RNVC: 9
XT3-4: RNCC: 5 | RNVC: 9
EFG-75-100C: RNCC: 5 | RNVC: 9
EFC12: RNCC: 5 | RNVC: 9
3-4INTYPEEFSEALTITE: RNCC: 5 | RNVC: 9
EF112: RNCC: 5 | RNVC: 9
EFSEALTITEGRAY3-4IN: RNCC: E | RNVC: 8
9081462: RNCC: E | RNVC: 8

1 Jan 1963

5975-00-097-8099
Electrical Conduit Locknut

000978099
AA50553-III-I-P-10-S: RNCC: 2 | RNVC: 2
AA50553: RNCC: 4 | RNVC: 1
FEDSTD156: RNCC: 5 | RNVC: 9
W-F-408: RNCC: 5 | RNVC: 9

29 May 1968

5975-00-100-8750
Electrical Conduit Coupling

001008750
AA50553-1-2-K-1-02-S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
FED-STD 156: RNCC: 5 | RNVC: 9
W-F-408: RNCC: 5 | RNVC: 9

29 May 1968

5975-00-100-8766
Electrical Box Connector

001008766
AA50554-1-2-L-1-04-S: RNCC: 2 | RNVC: 2
AA50553: RNCC: 4 | RNVC: 1
5421: RNCC: 5 | RNVC: 1
W-F-408: RNCC: 5 | RNVC: 9
FED-STD-156: RNCC: 5 | RNVC: 9
W-F-408-1-2-L-1-04: RNCC: 5 | RNVC: 9
AA50553-1-2-L-1-04: RNCC: 5 | RNVC: 9

26 Jun 1968

5975-00-023-0915
Electrical Cable Nipple

000230915
72B: RNCC: 3 | RNVC: 2
715899-39: RNCC: 5 | RNVC: 2

1 Jan 1963

5975-00-056-8600
Metallic Raceway

000568600
G2000BC: RNCC: 3 | RNVC: 2
G2000: RNCC: 5 | RNVC: 9
2000BANDC: RNCC: C | RNVC: 1
2000: RNCC: C | RNVC: 1

1 Jan 1961

5975-00-059-3646
Electrical Conductor Bushing

000593646
21918: RNCC: 3 | RNVC: 2
730-1404-5: RNCC: 5 | RNVC: 2

24 Jan 1968

5975-00-065-8289
Electrical Conduit Coupling

000658289
LS966-20: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-098-0131
Electrical Support

000980131
V5703: RNCC: 3 | RNVC: 2
5703: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-061-2622
Conduit Outlet

000612622
AA50563-201XLLRD: RNCC: 2 | RNVC: 2
A-A-50563A: RNCC: 4 | RNVC: 1
W-C-586: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-089-8693
Grounding Harness

000898693
PCM8693: RNCC: 3 | RNVC: 2
GH2: RNCC: 5 | RNVC: 9
29525: RNCC: 5 | RNVC: 9

2 Aug 1967

5975-00-100-8714
Electrical Conduit Coupling

001008714
AA50553-1-2-K-01-M: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
AA50553-1-2-K-01-S: RNCC: 5 | RNVC: 1
AA50553-1-II-K-01-M: RNCC: 5 | RNVC: 9
20800: RNCC: 5 | RNVC: 9
TK-111A: RNCC: 5 | RNVC: 9
TK-111: RNCC: 5 | RNVC: 9
W-F-408: RNCC: 5 | RNVC: 9
FED-STD 156: RNCC: 5 | RNVC: 9
760: RNCC: 5 | RNVC: 9

29 May 1968

5975-00-052-0757
Flexible Metal Conduit Assembly

000520757
ECGJH-75-18: RNCC: 3 | RNVC: 9
EXGJH-218: RNCC: 5 | RNVC: 2
ECGJH218: RNCC: 5 | RNVC: 2

23 May 1967

5975-00-052-1304
Conduit Outlet

000521304
0T1: RNCC: 3 | RNVC: 2
9322001: RNCC: 5 | RNVC: 2
T-50A: RNCC: 5 | RNVC: 9
00020-0104: RNCC: C | RNVC: 1

1 Jan 1961

5975-00-058-5241
Chafing Sleeve

000585241
538728: RNCC: 3 | RNVC: 2
538728: RNCC: 5 | RNVC: 9
5975PL0932133: RNCC: 6 | RNVC: 9

6 Jun 1967

5975-00-058-5175
Conduit Outlet

000585175
LL58: RNCC: 3 | RNVC: 2
LL58RFI: RNCC: 5 | RNVC: 9

13 Jun 1967

5975-00-064-8685
Knockout Reducing Washer

000648685
RW154: RNCC: 3 | RNVC: 2
517: RNCC: 3 | RNVC: 2
1379: RNCC: 3 | RNVC: 2
RW-15: RNCC: 3 | RNVC: 2
WA-165: RNCC: 5 | RNVC: 2
RW-16S: RNCC: 5 | RNVC: 9
R.W.6-5: RNCC: 5 | RNVC: 9
356: RNCC: 5 | RNVC: 9
1075: RNCC: 5 | RNVC: 9
15035: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-084-0127
Flexible Metal Conduit Assembly

000840127
363844-11: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-025-7947
Electrical Cable Nipple

000257947
11608369-37: RNCC: 1 | RNVC: 2
333D274-6: RNCC: 3 | RNVC: 9
1101-4-J: RNCC: 5 | RNVC: 2
333D274-6: RNCC: 5 | RNVC: 2
1101-4-J: RNCC: 5 | RNVC: 9
10087269: RNCC: 6 | RNVC: 9

17 Oct 1972

5975-00-043-0016
Junction Box

000430016
333D: RNCC: 3 | RNVC: 2
CY1-2: RNCC: 5 | RNVC: 2
54: RNCC: 5 | RNVC: 2
590: RNCC: 5 | RNVC: 2
590: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-073-4341
Electrical Wall Plate

000734341
3760: RNCC: 3 | RNVC: 9
3760: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-087-2726
Electrical Box Connector

000872726
3303M: RNCC: 3 | RNVC: 2
806T: RNCC: 5 | RNVC: 9
3303M: RNCC: 5 | RNVC: 9

20 Apr 1967

5975-00-100-8827
Electrical Conduit Coupling

001008827
AA50553-2-2-A-1-02-S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
W-F-408: RNCC: 5 | RNVC: 9
AA50553-2-2-K-1-02-S: RNCC: 5 | RNVC: 9
FED-STD 156: RNCC: 5 | RNVC: 9

5 Jun 1968

5975-00-005-7877
Conduit Outlet

000057877
S314-B: RNCC: 3 | RNVC: 2
S314-B: RNCC: 5 | RNVC: 9

16 Jun 1972

5975-00-007-1925
Electrical Box Connector

000071925
RNTC50: RNCC: 3 | RNVC: 2
NT2750B: RNCC: 5 | RNVC: 2
31-050T: RNCC: 5 | RNVC: 9
3802: RNCC: 5 | RNVC: 9
8123: RNCC: 5 | RNVC: 9
1750B: RNCC: 5 | RNVC: 9
CPR11: RNCC: 5 | RNVC: 9

28 Jun 1972

5975-00-063-9358
Electrical Equipment Rack

000639358
1987638-1: RNCC: 1 | RNVC: 2
50020-1A: RNCC: 3 | RNVC: 2
MT-4167/APN-171(V): RNCC: 3 | RNVC: 2
50020-1: RNCC: 5 | RNVC: 2

27 Jun 1967

5975-00-086-1402
Blank Panel

000861402
PA-1106HG: RNCC: 3 | RNVC: 9
LH-6680: RNCC: 5 | RNVC: 2
SMC535729-3: RNCC: E | RNVC: 8

29 Dec 1967

5975-00-086-8300
Terminal Clamp

000868300
9-1437381-5: RNCC: 3 | RNVC: 2
61: RNCC: 5 | RNVC: 9

20 Dec 1967

5975-00-100-8730
Electrical Box Connector

001008730
AA50553-1-2-L-1-03-S: RNCC: 2 | RNVC: 2
AA50553: RNCC: 4 | RNVC: 1
5321: RNCC: 5 | RNVC: 1
W-F-408: RNCC: 5 | RNVC: 9
FED-STD 156: RNCC: 5 | RNVC: 9
W-F-408-1-2-L-1-03-S: RNCC: 5 | RNVC: 9
96T0100: RNCC: C | RNVC: 1
2904: RNCC: C | RNVC: 1

26 Jun 1968

5975-00-100-8759
Electrical Box Connector

001008759
AA50553-1-2-L-1-05-S: RNCC: 2 | RNVC: 2
AA50553: RNCC: 4 | RNVC: 1
5521: RNCC: 5 | RNVC: 1
59115D27-39: RNCC: 5 | RNVC: 1
5521: RNCC: 5 | RNVC: 1
W-F-408: RNCC: 5 | RNVC: 9
FED-STD 156: RNCC: 5 | RNVC: 9
59115D27-39: RNCC: 5 | RNVC: 9
59115D27-39C: RNCC: 5 | RNVC: 9
FEDSTD156: RNCC: 5 | RNVC: 9

10 Jul 1968

5975-00-036-5753
Flexible Metal Conduit Assembly

000365753
212997-D10120: RNCC: 3 | RNVC: 2
C223-0500-1200G3G4KC: RNCC: 5 | RNVC: 9

10 Nov 1972

5975-00-052-0775
Flexible Metal Conduit Assembly

000520775
EKJ124: RNCC: 3 | RNVC: 2
ECGJH124: RNCC: 5 | RNVC: 2

28 Nov 1974

5975-00-006-5248
Interconnecting Box

000065248
6009T14P01: RNCC: 1 | RNVC: 2
65036: RNCC: 3 | RNVC: 2

19 Jun 1972

5975-00-052-0779
Flexible Metal Conduit Assembly

000520779
ECGJH236: RNCC: 3 | RNVC: 2
EXGJH236: RNCC: 5 | RNVC: 2
ECGJH-75-36: RNCC: 5 | RNVC: 9

23 May 1967

5975-00-076-1653
Electrical Nonmetallic Conduit Assembly

000761653
ECLK112: RNCC: 3 | RNVC: 2
EXLK-112: RNCC: 5 | RNVC: 2

2 Aug 1967

5975-00-079-8246
Electrical Equipment Cabinet

000798246
CU-2106B: RNCC: 3 | RNVC: 2
CU2106A: RNCC: 5 | RNVC: 9
RI-012-111: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-020-6756
Electrical Box Connector

000206756
CGB2015: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-032-0628
Electrical Components Tie Down Strap

000320628
2051803-0704: RNCC: 3 | RNVC: 2
4-10-1: RNCC: 5 | RNVC: 9

24 Oct 1972

5975-00-089-3481
Junction Box

000893481
18650: RNCC: 3 | RNVC: 9
12126-SC1: RNCC: 5 | RNVC: 9

1 Jan 1960

5975-00-100-8713
Electrical Conduit Coupling

001008713
AA50553-1-2-K-03-S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
FED-STD 156: RNCC: 5 | RNVC: 9
W-F-408: RNCC: 5 | RNVC: 9
AA50553-I-2-K-03: RNCC: 5 | RNVC: 9

29 May 1968

5975-00-012-3436
Electrical Box Connector

000123436
5365: RNCC: 3 | RNVC: 2
5365: RNCC: 5 | RNVC: 2
STN-125: RNCC: 5 | RNVC: 2
CHQ125: RNCC: 5 | RNVC: 9

10 May 1968

5975-00-094-2665
Electrical Box Connector

000942665
HUB125: RNCC: 3 | RNVC: 2
CH125: RNCC: 5 | RNVC: 9
A3094037-213: RNCC: E | RNVC: 8
373: RNCC: E | RNVC: 8
A3094037: RNCC: E | RNVC: 8

29 Nov 1972

5975-00-032-0670
Junction Box Cover

000320670
11511: RNCC: 3 | RNVC: 2
8492: RNCC: 5 | RNVC: 2
RSL8: RNCC: 5 | RNVC: 2
652: RNCC: 5 | RNVC: 9
877: RNCC: 5 | RNVC: 9

28 Oct 1972

5975-00-060-8019
Conduit Outlet

000608019
AA50563-101ALLLA: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
LL50MWITHK50: RNCC: 5 | RNVC: 1
LL17WITH170F: RNCC: 5 | RNVC: 1
RLL10WITH430: RNCC: 5 | RNVC: 9
WC586T: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-089-1626
Junction Box

000891626
333: RNCC: 3 | RNVC: 2
560: RNCC: 5 | RNVC: 2
53: RNCC: 5 | RNVC: 2
CWX: RNCC: 5 | RNVC: 2
676: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-00-097-0176
Stuffing Tube

000970176
M19622-5-005: RNCC: 2 | RNVC: 2
MIL-S-19622-5: RNCC: 4 | RNVC: 1

13 Dec 1972

5975-00-087-4341
Electrical Equipment Cabinet

000874341
CU2100B: RNCC: 3 | RNVC: 2
CU2100A: RNCC: 3 | RNVC: 9
GR24-35-0003: RNCC: C | RNVC: 1

1 Jan 1963

5975-00-020-8827
Ground Rod

000208827
SC-DL-75591: RNCC: 3 | RNVC: 2

1 Jan 1963

5975-00-036-5702
Electrical Conduit Elbow

000365702
E1124-401C20KC: RNCC: 3 | RNVC: 2

1 Nov 1972

5975-00-079-4313
Conduit Outlet

000794313
AA50563-101ATAAB: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
6-1-1900-131: RNCC: 5 | RNVC: 1
TA27: RNCC: 5 | RNVC: 1
WC586: RNCC: 5 | RNVC: 9
TYPE I DESIGN 1 STYLE TA: RNCC: 5 | RNVC: 9
6-1-1900-131A: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-100-8708
Electrical Conduit Locknut

001008708
AA50553-3-1-P-1-07-S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
BL250: RNCC: 5 | RNVC: 1
FEDSTD156: RNCC: 5 | RNVC: 9
W-F-408: RNCC: 5 | RNVC: 9

5 Jun 1968

5975-00-006-9245
Electrical Cable Nipple

000069245
222A142-3-00: RNCC: 3 | RNVC: 2
1104--2-B7P: RNCC: 5 | RNVC: 2
11608369-4: RNCC: 5 | RNVC: 2
25114-00127: RNCC: 5 | RNVC: 9
1104--2-B7P: RNCC: 5 | RNVC: 9

30 Jun 1972

5975-00-043-5326
Electrical Tie Down Mounting Base

000435326
TC812TB: RNCC: 3 | RNVC: 2
TC812TB: RNCC: 5 | RNVC: 2

15 May 1968

5975-00-050-0981
Intercommunic Panel

000500981
C22-5005-012: RNCC: 3 | RNVC: 2
C22-5005-012: RNCC: 5 | RNVC: 2
P110-1047: RNCC: 5 | RNVC: 9
1710-24: RNCC: 5 | RNVC: 9
330-2: RNCC: 5 | RNVC: 9
C22-5005-012: RNCC: 5 | RNVC: 9
5975PL1046535: RNCC: 6 | RNVC: 9

9 May 1967

5975-00-058-5182
Conduit Outlet

000585182
LR38: RNCC: 3 | RNVC: 2
LR-100/BC-100G/SGN-100: RNCC: 5 | RNVC: 9
LR38: RNCC: 5 | RNVC: 9
LR38/380F/GASK853N: RNCC: 5 | RNVC: 9
LR38RFI: RNCC: 5 | RNVC: 9
LR38: RNCC: E | RNVC: 8

13 Jun 1967

5975-00-053-3385
Electrical Cable Nipple

000533385
8737843-20: RNCC: 1 | RNVC: 2
202D153-4-0: RNCC: 3 | RNVC: 2
102-4-J: RNCC: 5 | RNVC: 2
102-4-J: RNCC: 5 | RNVC: 9
202D153-4: RNCC: 5 | RNVC: 9

13 Nov 1972

5975-00-075-0447
Electrical Nonmetallic Conduit Assembly

000750447
ECLK115: RNCC: 3 | RNVC: 2
EXLK-115: RNCC: 5 | RNVC: 2

2 Aug 1967

5975-00-089-9915
Safety Cable

000899915
MS17339-2: RNCC: 2 | RNVC: 2
5975000899915: RNCC: 6 | RNVC: 9
752-6405311-33: RNCC: C | RNVC: 1

11 Aug 1967

5975-00-098-5464
Blank Panel

000985464
723401: RNCC: 3 | RNVC: 2
723401: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-100-8721
Electrical Box Connector

001008721
AA50553-I-2-L-1-01-M: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
1A20295H01: RNCC: 5 | RNVC: 1
5121: RNCC: 5 | RNVC: 1
1A20295: RNCC: 5 | RNVC: 1

10 Jul 1968

5975-00-100-8787
Electrical Conduit Locknut

001008787
AA50553-3-1-P-03-S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
FED-STD 156: RNCC: 5 | RNVC: 9
W-F-408: RNCC: 5 | RNVC: 9

5 Jun 1968

5975-00-100-8767
Electrical Conduit Locknut

001008767
AA50553-3-1-P-1-02-S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
W-F-408: RNCC: 5 | RNVC: 9
EE750: RNCC: 5 | RNVC: 9
FED-STD 156: RNCC: 5 | RNVC: 9
EE75: RNCC: 5 | RNVC: 9
EE75: RNCC: 5 | RNVC: 9
EE750: RNCC: 5 | RNVC: 9

5 Jun 1968

5975-00-035-6524
Outlet Plugmold Coupling

000356524
2101: RNCC: 3 | RNVC: 2
151-164-1: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-00-082-0612
Electronic Junction Rack

000820612
63: RNCC: 3 | RNVC: 2

13 Dec 1967

NSN 5975-00-070-5481 000705481 MOUNTING BASE,ELECTRICAL EQUIPMENT

5975-00-070-5481
Electrical Equipment Mounting Base

000705481
13180-2B: RNCC: 3 | RNVC: 2
1790536-1: RNCC: 5 | RNVC: 2
1790536-1: RNCC: 5 | RNVC: 9

1 Jan 1963

NSN 5975-00-080-6878 000806878 CONDUIT,METAL,FLEXIBLE

5975-00-080-6878
Flexible Metal Conduit

000806878
LT15: RNCC: 3 | RNVC: 2
EF1-1-2: RNCC: 3 | RNVC: 2
47006: RNCC: 5 | RNVC: 2
EFC15: RNCC: 5 | RNVC: 9
EFG-150-50C: RNCC: 5 | RNVC: 9
EF115: RNCC: 5 | RNVC: 9
EF1-1-2: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-081-5247
Electrical Box Connector

000815247
ST150: RNCC: 3 | RNVC: 2
LT-150: RNCC: 5 | RNVC: 9
4Q-150: RNCC: 5 | RNVC: 9
11-150: RNCC: 5 | RNVC: 9
773735-6: RNCC: 7 | RNVC: 2

1 Jan 1963

5975-00-092-5028
Electrical Conduit Union

000925028
UNF505: RNCC: 3 | RNVC: 2
UNF-150: RNCC: 5 | RNVC: 9

3 Dec 1972

5975-00-096-2717
Junction Box

000962717
M24142/5-002: RNCC: 2 | RNVC: 2
MIL-E-24142/5: RNCC: 4 | RNVC: 1
73853-10X16PC6: RNCC: 5 | RNVC: 1
3667-80PC1: RNCC: 5 | RNVC: 1
MS17234PC19: RNCC: 5 | RNVC: 9

1 Jan 1963

5975-00-100-8693
Electrical Conduit Bushing

001008693
AA50553-3-1-Q-1-01-S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
AA5055331Q01M/S: RNCC: 5 | RNVC: 9
FED-STD-156: RNCC: 5 | RNVC: 9
W-F-408: RNCC: 5 | RNVC: 9

3 Jun 1968

5975-99-364-1762

5975-01-693-3005
Electronic Equipment Mounting Tray

016933005
827-10053-8: RNCC: 1 | RNVC: 2
73003361-001: RNCC: 3 | RNVC: 2
73003361: RNCC: 3 | RNVC: 9
827-10053-8: RNCC: 5 | RNVC: 9
827-10053: RNCC: D | RNVC: 9

3 Feb 2021

5975-01-685-1850
Chassis Base

016851850
10497-0213-01: RNCC: 3 | RNVC: 2
10497-0213: RNCC: D | RNVC: 9

5 Dec 2019

5975-01-685-3952
Electronic Equipment Mounting Tray

016853952
1062037-101: RNCC: 1 | RNVC: 2
8940290-0001: RNCC: 3 | RNVC: 2
1062037: RNCC: D | RNVC: 9

16 Dec 2019

5975-01-683-0557
Raceway Cover

016830557
AL3300C5: RNCC: 3 | RNVC: 2

6 Sep 2019

5975-01-664-9287
Electrical Components Tie Down Strap

016649287
L-14-50-0-C: RNCC: 3 | RNVC: 2

12 Jul 2017

5975-01-652-2674
Cable Hanger

016522674
CRS-25-1U: RNCC: 3 | RNVC: 2

16 Feb 2016

5975-01-643-6414
Cable Marker Sleeve

016436414
PSPT-094-1-WT: RNCC: 3 | RNVC: 2

8 Apr 2015

5975-01-422-7722
Electrical Tie Down Mounting Base

014227722
CB4021G3N16: RNCC: 3 | RNVC: 2

7 Dec 1995

5975-01-308-8746
Flexible Metal Conduit Assembly

013088746
251015-00660: RNCC: 3 | RNVC: 2
750-011NF08-66: RNCC: 3 | RNVC: 2
200204-DI0660: RNCC: 3 | RNVC: 2
10250675-42: RNCC: 7 | RNVC: 2

6 Oct 1989

5975-01-302-9636
Flexible Metal Conduit Assembly

013029636
750-011NF24-178: RNCC: 3 | RNVC: 1
200187-DI1780: RNCC: 3 | RNVC: 1
10250675-82: RNCC: 3 | RNVC: 2

22 Jun 1989

5975-01-296-7106
Flexible Metal Conduit Assembly

012967106
251017-00960: RNCC: 3 | RNVC: 1
750-011NF16-96: RNCC: 3 | RNVC: 1
200206-DI0960: RNCC: 3 | RNVC: 1
10250675-64: RNCC: 3 | RNVC: 2

23 Mar 1989

5975-01-299-0385
Flexible Metal Conduit Assembly

012990385
200207-DI0325: RNCC: 3 | RNVC: 9
CH10-0340-202: RNCC: 5 | RNVC: 9
750-011NF48-32.5: RNCC: 5 | RNVC: 9
10250675-102: RNCC: 7 | RNVC: 2

24 Apr 1989

5975-01-296-9663
Electrical Conduit Wye

012969663
150137: RNCC: 3 | RNVC: 2
G63161: RNCC: 3 | RNVC: 2
101012: RNCC: 3 | RNVC: 2
186702-FB6200: RNCC: 3 | RNVC: 2
CH09-0340-501: RNCC: 5 | RNVC: 9
10250743-1: RNCC: 7 | RNVC: 2

26 Mar 1989

5975-01-214-0194
Enclosure Assembly

012140194
70550-01141-041: RNCC: 3 | RNVC: 2
70550-01141-041: RNCC: 5 | RNVC: 2
70550-01141-042: RNCC: 5 | RNVC: 9

4 Aug 1985

5975-01-146-8426
Cable Marker Sleeve

011468426
TMS-SCE-3/8-2.0-9: RNCC: 3 | RNVC: 2
267-2499: RNCC: 5 | RNVC: 2
215511T105: RNCC: 5 | RNVC: 9
215511T105: RNCC: 7 | RNVC: 2

7 Feb 1983

5975-01-014-9937
Stuffing Tube

010149937
M24235/17-064: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1

13 Jan 1976

5975-01-014-9005
Stuffing Tube

010149005
M24235/17-061: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1

8 Jan 1976

5975-00-296-4756
Junction Box

002964756
M24142/6-001: RNCC: 2 | RNVC: 2
MIL-E-24142/6: RNCC: 4 | RNVC: 1

1 Jan 1963

5975-99-347-5276
Electrical Components Tiedown Strap

993475276
T120S: RNCC: 3 | RNVC: 2
G406-8620 ITEM 4K: RNCC: 5 | RNVC: 2
G406-8620/4K: RNCC: 5 | RNVC: 2
T120SRS: RNCC: 5 | RNVC: 9

4 Aug 2004

5975-25-160-3160
Electrical Equipment Mounting Base

251603160
60207524-00: RNCC: 3 | RNVC: 2

19 Oct 2009

5975-12-365-8420
Electrical Fitting Mounting Base

123658420
46950: RNCC: 3 | RNVC: 2
2IP55: RNCC: 5 | RNVC: 2

11 Feb 2005

5975-99-151-6060
Electrical Components Tie Down Strap

991516060
BT4LH-TL0: RNCC: 3 | RNVC: 2
2509527006: RNCC: 5 | RNVC: 2

29 Mar 2010

5975-01-686-9233
Electrical Equipment Shelf

016869233
4353861: RNCC: 3 | RNVC: 2

10 Mar 2020

5975-01-631-2029
Electrical Cable Protector

016312029
13015829: RNCC: 3 | RNVC: 2

4 Sep 2014

5975-01-668-4369
Raceway Coupler

016684369
AL3311: RNCC: 3 | RNVC: 2

22 Nov 2017

5975-01-650-2356
Electrical Components Tie Down Strap

016502356
43046: RNCC: 3 | RNVC: 2

23 Nov 2015

5975-01-660-0903
Electrical-Electronic Equipment Chassis

016600903
UEIPAC-1200-NRC: RNCC: 3 | RNVC: 2
4043AS2405-1: RNCC: 5 | RNVC: 2
4043AS2405-1: RNCC: 7 | RNVC: 2

5 Jan 2017

5975-01-682-8921
Cable Gland Plate

016828921
IPC10887AA: RNCC: 3 | RNVC: 2
IPC30141AA: RNCC: D | RNVC: 9

28 Aug 2019

5975-01-659-2674
Electrical-Electronic Equipment Chassis

016592674
7611528: RNCC: 3 | RNVC: 2
26067-OPT2: RNCC: 3 | RNVC: 2
26067-OPT2: RNCC: 5 | RNVC: 2

15 Nov 2016

5975-01-626-5510
Ground Rod

016265510
PDR-GRS: RNCC: 3 | RNVC: 2

13 Mar 2014

5975-01-631-2524
Electrical-Electronic Equipment Chassis

016312524
89-FANTRAY-CAP3471-GDEB: RNCC: 3 | RNVC: 1
CAS000774: RNCC: 3 | RNVC: 2
CAP003471-126: RNCC: C | RNVC: 1

5 Sep 2014

5975-01-654-9498
Blank Panel

016549498
5403544: RNCC: 3 | RNVC: 2
5369665: RNCC: 3 | RNVC: 9

13 May 2016

5975-01-650-6308
Electrical Equipment Drawer

016506308
DRFH3-24-25EL: RNCC: 3 | RNVC: 2
PRFH3-24-25EL: RNCC: 5 | RNVC: 9

11 Dec 2015

5975-01-686-5336
Electrical Wall Plate

016865336
BA/1K-SP: RNCC: 3 | RNVC: 2

21 Feb 2020

5975-01-694-2530
Electrical Equipment Rack

016942530
505M1402R11-9/0206: RNCC: 3 | RNVC: 2

24 Mar 2021

5975-01-668-1467
Electrical Conduit Adapter

016681467
M24758-5 F: RNCC: 3 | RNVC: 2
01D3173H06: RNCC: 7 | RNVC: 2
01D3173: RNCC: D | RNVC: 9

9 Nov 2017

5975-01-564-6580
Junction Box

015646580
MSC08-1973-1A: RNCC: 3 | RNVC: 2

24 Jun 2008

5975-01-584-5355
Electrical Conduit Adapter

015845355
M24758-2B: RNCC: 3 | RNVC: 2

28 Apr 2010

5975-01-548-2502
Electrical Components Tie Down Strap

015482502
PLA2S-A-C: RNCC: 3 | RNVC: 2
NGS874AF1: RNCC: 5 | RNVC: 2
NGS874AF: RNCC: D | RNVC: 9

15 Feb 2007

5975-01-602-7357
Electrical Equipment Rack

016027357
G219-TP-USB: RNCC: 3 | RNVC: 2
G219-TP-USB: RNCC: 5 | RNVC: 9

3 Feb 2012

5975-01-611-2176
Electrical Cable Protector

016112176
12544029: RNCC: 3 | RNVC: 2

7 Sep 2012

5975-01-571-0206
Electrical Equipment Cabinet Case

015710206
BR1-1A08922-501: RNCC: 3 | RNVC: 2
BR1-1A08920 ITEM 2: RNCC: 5 | RNVC: 1
BR1-1A08922-501: RNCC: 5 | RNVC: 2

22 Jan 2009

5975-01-604-9330
Rail Guide.Electric Component Stop

016049330
1201662: RNCC: 3 | RNVC: 2
277-5362-ND: RNCC: C | RNVC: 1

13 Apr 2012

5975-01-619-5615
Electrical Cable Protector

016195615
512541: RNCC: 3 | RNVC: 2

6 Jun 2013

5975-01-544-1766
Split Corrugated Loom

015441766
3473511: RNCC: 3 | RNVC: 2
3473511: RNCC: 3 | RNVC: 9
LCN-1250-100: RNCC: 5 | RNVC: 2

4 Oct 2006

5975-01-597-5530
Electrical Components Tie Down Strap

015975530
69855K75: RNCC: 3 | RNVC: 2

14 Jun 2011

5975-01-606-6137
Rigid Metal Conduit

016066137
T4G04103-105A: RNCC: 3 | RNVC: 2

22 May 2012

5975-01-609-5711
Junction Box

016095711
9380-0825: RNCC: 3 | RNVC: 2

28 Jul 2012

5975-01-617-1079
Flexible Nonmetallic Conduit

016171079
92N3678: RNCC: 3 | RNVC: 2

12 Mar 2013

5975-01-566-8566
Electrical Tie Down Mounting Base

015668566
MPNY-1000-9-C: RNCC: 3 | RNVC: 2

11 Sep 2008

5975-01-512-7953
Flexible Metal Conduit Assembly

015127953
CA00884-3E4WG3W00170: RNCC: 3 | RNVC: 2
CA00884-3E4WG3W00170: RNCC: 5 | RNVC: 9

10 Sep 2003

5975-01-553-2296
Metallic Raceway

015532296
12423626-016: RNCC: 3 | RNVC: 2

11 Jul 2007

5975-01-554-5015
Electrical Equipment Shelf

015545015
SASIM: RNCC: 3 | RNVC: 2
KEP 813 75/1: RNCC: 5 | RNVC: 2

12 Aug 2007

5975-01-574-6443
Metallic Raceway

015746443
30065T513: RNCC: 3 | RNVC: 2

3 Jun 2009

5975-01-461-7583
Stuffing Tube

014617583
M24235/13-153: RNCC: 2 | RNVC: 2
MIL-T-81714/13: RNCC: 4 | RNVC: 1
RO0066D: RNCC: 5 | RNVC: 9
RO0066A: RNCC: 5 | RNVC: 9
RO0066C: RNCC: 5 | RNVC: 9

31 Dec 1998

5975-01-406-1785
Conduit Outlet

014061785
57433-02: RNCC: 3 | RNVC: 2

22 Dec 1994

5975-01-474-3694
Electronic Equipment Mounting Tray

014743694
300-316605-01: RNCC: 3 | RNVC: 2
300-316605-01: RNCC: 3 | RNVC: 9
S434A20T1003: RNCC: 5 | RNVC: 2

2 May 2000

5975-01-468-1308
Fiber Optic Connector Set

014681308
11401-101: RNCC: 3 | RNVC: 2
M24728/1-005: RNCC: 5 | RNVC: 9
MIL-I-24728: RNCC: 5 | RNVC: 9
11401-101: RNCC: 5 | RNVC: 9
MIL-DTL-24728/1: RNCC: 5 | RNVC: 9
M24728/01-005: RNCC: 5 | RNVC: 9
401-7270268 PC1: RNCC: 5 | RNVC: 9

29 Sep 1999

5975-01-387-4551
Flexible Metal Conduit Assembly

013874551
57350-28FT0IN: RNCC: 3 | RNVC: 2
57350-28: RNCC: 5 | RNVC: 9

5 Mar 1994

5975-01-335-9568
Electrical Equipment Mounting Base

013359568
16F0265-57: RNCC: 3 | RNVC: 2
16F0265-57: RNCC: 5 | RNVC: 2

17 Mar 1991

5975-01-318-5946
Junction Box

013185946
13227E7250: RNCC: 3 | RNVC: 2

21 Apr 1990

5975-01-341-7364
Electrical Equipment Mounting Base

013417364
1815-3: RNCC: 3 | RNVC: 2
65610-02032-104: RNCC: 7 | RNVC: 2

5 Jul 1991

5975-01-285-9830
Electrical Cable Protector

012859830
12345389: RNCC: 3 | RNVC: 2
5975012859830: RNCC: 6 | RNVC: 9

23 Sep 1988

5975-01-336-7067
Electrical Conductor Bushing

013367067
560-0248-002: RNCC: 3 | RNVC: 2

31 Mar 1991

5975-01-273-8134
Electrical Components Tie Down Strap

012738134
PLM2S-D: RNCC: 3 | RNVC: 2
MS3368-3: RNCC: 4 | RNVC: 1

1 Mar 1988

5975-01-301-2173
Electrical Nonmetallic Conduit Assembly

013012173
R58HB16K16A060C: RNCC: 3 | RNVC: 2
R58HB16K16A060C: RNCC: 5 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

25 May 1989

5975-01-224-5799
Cable Hanger

012245799
8500-424 PIECE 19: RNCC: 3 | RNVC: 2
1716084 PIECE 19: RNCC: 3 | RNVC: 2
1716084: RNCC: 5 | RNVC: 2

17 Jan 1986

5975-01-165-8761
Electrical Equipment Cabinet

011658761
TR-6100: RNCC: 3 | RNVC: 2

4 Nov 1983

5975-01-057-1087
Electrical Conduit Elbow

010571087
G62833: RNCC: 3 | RNVC: 2

6 Mar 1978

5975-01-132-6170
Wire Marker Books

011326170
PCMB-2: RNCC: 3 | RNVC: 2
AL-MARK-02: RNCC: 5 | RNVC: 2

2 Jun 1982

5975-01-141-6837
Cable Marker Sleeve

011416837
TMS-SCE-1/2-2.0-9: RNCC: 3 | RNVC: 1
215511T94: RNCC: 5 | RNVC: 2
50092851-002: RNCC: 5 | RNVC: 2
RNF-100-1/2X2 WHITE: RNCC: 5 | RNVC: 9
215511T94: RNCC: 7 | RNVC: 2

3 Nov 1982

5975-01-180-3545
Cable Hanger

011803545
12310540: RNCC: 3 | RNVC: 2

26 May 1984

5975-01-217-1497
Electrical Box Connector

012171497
CG-7575: RNCC: 3 | RNVC: 9
CG-7575: RNCC: 5 | RNVC: 2

22 Sep 1985

5975-01-202-6880
Flexible Metal Conduit Assembly

012026880
146808-101: RNCC: 1 | RNVC: 2
750-011NF12-46: RNCC: 3 | RNVC: 2
71449-1: RNCC: 3 | RNVC: 2
210968-D10460: RNCC: 3 | RNVC: 2
115166-1: RNCC: 5 | RNVC: 2
115166-1: RNCC: 5 | RNVC: 9
210968-D10460-0: RNCC: 5 | RNVC: 9

5 Mar 1985

5975-00-825-5422
Electrical Equipment Cabinet

008255422
CU3004A: RNCC: 3 | RNVC: 2
AMC1004: RNCC: 5 | RNVC: 9
9001-758: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-808-4067
Stuffing Tube

008084067
M19622-3-007: RNCC: 2 | RNVC: 2
MILS19622-3: RNCC: 4 | RNVC: 1
9S5457LALT9SYM1553-13: RNCC: 5 | RNVC: 1

1 Jan 1962

5975-00-296-6608
Stuffing Tube

002966608
M24235-11-02: RNCC: 2 | RNVC: 2
MILS24235: RNCC: 4 | RNVC: 1
9000-S6202-74438: RNCC: 5 | RNVC: 1

1 Jan 1963

5975-00-839-6277
Offset Raceway Connector

008396277
V5786: RNCC: 3 | RNVC: 2
PC412800048F1: RNCC: 5 | RNVC: 9
PC412800048F1: RNCC: 5 | RNVC: 9
5786: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-00-038-2357
Metallic Raceway

000382357
V500: RNCC: 3 | RNVC: 2
500: RNCC: 5 | RNVC: 9
222: RNCC: 5 | RNVC: 9
TYPE500: RNCC: 5 | RNVC: 9

1 Jan 1961

5975-01-686-6944
Electrical Equipment Mounting Base

016866944
4101AS0175-1: RNCC: 3 | RNVC: 2
4101AS0175: RNCC: D | RNVC: 9

28 Feb 2020

5975-01-651-5920
Electrical Nonmetallic Conduit Assembly

016515920
70551-07000-103: RNCC: 3 | RNVC: 2
70551-07000: RNCC: D | RNVC: 9

22 Jan 2016

5975-01-609-8587
Flexible Metal Conduit Assembly

016098587
4G14259-101A: RNCC: 3 | RNVC: 2

4 Aug 2012

5975-01-590-9711
Electrical Nonmetallic Conduit Assembly

015909711
23A02055: RNCC: 3 | RNVC: 2
749-051: RNCC: 3 | RNVC: 2
13425156: RNCC: 7 | RNVC: 2

5 Jan 2011

5975-01-689-9580
Cable Terminal Chamber

016899580
2718196: RNCC: 3 | RNVC: 2

17 Jul 2020

5975-01-689-9463
Cable Terminal Chamber

016899463
1858057: RNCC: 3 | RNVC: 2

17 Jul 2020

5975-01-690-6568
Electrical Nonmetallic Conduit Assembly

016906568
200AS349-040KG06041FA100: RNCC: 3 | RNVC: 2

25 Aug 2020

5975-01-690-6570
Electrical Nonmetallic Conduit Assembly

016906570
200AS349-041FG04041KA016: RNCC: 3 | RNVC: 2
749-183-15: RNCC: 5 | RNVC: 2

25 Aug 2020

5975-01-695-0442
Electrical Tie Down Mounting Base

016950442
CB3019CR3N: RNCC: 3 | RNVC: 2
HS5837-CR3N-750: RNCC: 7 | RNVC: 2
HS5837 REV B: RNCC: D | RNVC: 9

11 May 2021

5975-01-689-5138
Electrical Wall Plate

016895138
1302215: RNCC: 3 | RNVC: 2

24 Jun 2020

5975-01-689-9467
Cable Terminal Chamber

016899467
461018: RNCC: 3 | RNVC: 2

17 Jul 2020

5975-01-687-1782
Interconnecting Box

016871782
123AV93636-19: RNCC: 3 | RNVC: 2

23 Mar 2020

5975-01-680-8559
Electrical-Electronic Equipment Panel

016808559
930-31120-1: RNCC: 3 | RNVC: 2
PL930-31120: RNCC: C | RNVC: 1
930-31120: RNCC: D | RNVC: 9

23 May 2019

5975-01-681-3373
Electrical-Electronic Equipment Chassis

016813373
CB50498-001: RNCC: 3 | RNVC: 2
CB50498: RNCC: D | RNVC: 9

13 Jun 2019

5975-01-606-6144
Rigid Metal Conduit

016066144
T4G04103-119A: RNCC: 3 | RNVC: 2

22 May 2012

5975-01-609-2819
Flexible Metal Conduit

016092819
W-1297-20: RNCC: 3 | RNVC: 2
12510307: RNCC: 3 | RNVC: 2
179489-3204: RNCC: 5 | RNVC: 9
179489-3204: RNCC: C | RNVC: 1
8711297: RNCC: D | RNVC: 9

21 Jul 2012

5975-01-609-2824
Flexible Metal Conduit

016092824
12510305: RNCC: 1 | RNVC: 2
179489-2008: RNCC: 3 | RNVC: 2
W-1297-18: RNCC: 3 | RNVC: 2
179489-2008: RNCC: 5 | RNVC: 9
8711297: RNCC: D | RNVC: 9

21 Jul 2012

5975-01-614-5182
Electrical Wall Plate

016145182
2CCB-FS: RNCC: 3 | RNVC: 2
11B5091504: RNCC: 7 | RNVC: 2

6 Dec 2012

5975-01-649-6987
Electrical-Electronic Equipment Panel

016496987
7-611642002-001: RNCC: 1 | RNVC: 2
MD18010-1: RNCC: 3 | RNVC: 2
MD12010-1: RNCC: 5 | RNVC: 9

6 Nov 2015

5975-01-533-6581
Electrical Equipment Rack Base

015336581
4981949-1: RNCC: 3 | RNVC: 2
4981949-3: RNCC: 3 | RNVC: 2

22 Sep 2005

5975-01-609-2821
Flexible Metal Conduit

016092821
12510306: RNCC: 1 | RNVC: 2
W-1297-19: RNCC: 3 | RNVC: 2
179489-2300: RNCC: 5 | RNVC: 9
179489-2300: RNCC: C | RNVC: 1
8711297: RNCC: D | RNVC: 9

21 Jul 2012

5975-01-609-2822
Flexible Metal Conduit

016092822
12510344: RNCC: 1 | RNVC: 2
W-1297-21: RNCC: 3 | RNVC: 2
179489-4208: RNCC: 3 | RNVC: 2
179489-4208: RNCC: 5 | RNVC: 9
8711297: RNCC: D | RNVC: 9

21 Jul 2012

5975-01-568-1600
Electrical Cable Protector

015681600
13540109: RNCC: 3 | RNVC: 2
13540109: RNCC: 5 | RNVC: 1

22 Oct 2008

5975-01-604-5844
Electronic Junction Rack

016045844
LL200: RNCC: 3 | RNVC: 2
008-014298-0001: RNCC: 7 | RNVC: 2
008-014298: RNCC: D | RNVC: 9

9 Apr 2012

5975-01-465-5059
Strain Electrical Conductor Clamp

014655059
11475031: RNCC: 3 | RNVC: 2

10 Jun 1999

5975-01-445-6167
Electrical Equipment Mounting Base

014456167
822-0790-001: RNCC: 3 | RNVC: 2

6 Jun 1997

5975-01-471-8722
Strain Electrical Conductor Clamp

014718722
30-302-2D06J14: RNCC: 3 | RNVC: 2
30-302-2D06J14: RNCC: 5 | RNVC: 2
30-302-2D06J14: RNCC: 5 | RNVC: 2
30-302-2D06J14: RNCC: 5 | RNVC: 2
30-302-2D06J14: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-327-3945
Cable Channel

013273945
7241541-04: RNCC: 3 | RNVC: 2

12 Oct 1990

5975-01-219-8703
Junction Box

012198703
70550-02130-048: RNCC: 3 | RNVC: 2

4 Nov 1985

5975-01-119-7761
Flexible Metal Conduit Assembly

011197761
10911019: RNCC: 1 | RNVC: 2
W-1297-13: RNCC: 3 | RNVC: 2
179489-0200: RNCC: 3 | RNVC: 2
8711297: RNCC: D | RNVC: 9

4 Oct 1981

5975-01-069-4688
Electrical Conduit Union

010694688
UNY75NR: RNCC: 3 | RNVC: 2
UNY215: RNCC: 5 | RNVC: 2
UNY-75B: RNCC: 5 | RNVC: 9

16 Dec 1978

5975-00-141-3559
Electrical Equipment Shelf

001413559
SCD48610: RNCC: 3 | RNVC: 2

12 Jan 1973

5975-01-143-1920
Cable Hanger

011431920
71320328-009: RNCC: 3 | RNVC: 2

28 Nov 1982

5975-01-113-9716
Conduit Outlet Cover

011139716
62594: RNCC: 3 | RNVC: 2
62594: RNCC: 5 | RNVC: 1

7 Jun 1981

5975-00-963-7947
Boot Support Collar

009637947
17778: RNCC: 3 | RNVC: 2
950778-507: RNCC: 5 | RNVC: 2
950788-507: RNCC: 5 | RNVC: 9

1 Jan 1962

5975-13-117-3471
Cable Marker Sleeve

131173471
1125224A17: RNCC: 3 | RNVC: 2

6 Aug 1999

5975-14-465-2174
Electrical Equipment Cabinet

144652174
385939: RNCC: 3 | RNVC: 2
385939-004: RNCC: 5 | RNVC: 9

15 Sep 1993

5975-12-383-2880
Electrical-Electronic Equipment Chassis

123832880
SK1018-062311.000.0: RNCC: 3 | RNVC: 2
7106855: RNCC: 5 | RNVC: 2

4 Oct 2010

5975-14-514-4140

5975-26-050-4114
Electrical Grounding Plate

260504114
796SE48251QAAA: RNCC: 3 | RNVC: 2

9 Jul 1992

5975-21-111-1456
Electrical Cable Protector

211111456
351548: RNCC: 3 | RNVC: 2

4 Jun 1968

5975-14-416-1162
Boit Deri Couvercle

144161162
207162: RNCC: 3 | RNVC: 2

3 Jun 1987

5975-27-024-9035
Kablo Duzenleyici

270249035
E44ORG2U: RNCC: 2 | RNVC: 1
ESTE44ORG2U: RNCC: 5 | RNVC: 9

15 Dec 2004

5975-13-116-0775
Cable Marker Sleeve

131160775
1124031A126: RNCC: 3 | RNVC: 2

5 Jun 1996

5975-12-181-2673
Conduit Outlet

121812673
6052902: RNCC: 3 | RNVC: 2

7 Nov 1979

5975-13-114-5895
Cable Marker Sleeve

131145895
1119435: RNCC: 3 | RNVC: 2

14 Sep 1993

5975-14-213-5015

5975-14-310-4919

5975-12-188-3045
Leiste

121883045
5030-0102-0002: RNCC: 3 | RNVC: 2

29 Jun 1981

5975-14-450-5815
Limiteur Ouverture

144505815
A10111-01-1080: RNCC: 3 | RNVC: 2
44026168: RNCC: 3 | RNVC: 2
44026168: RNCC: 5 | RNVC: 9

9 Oct 1991

5975-12-328-9348
Electrical Equipment Rack

123289348
5802291-20100: RNCC: 2 | RNVC: 2
5802291-20100: RNCC: 3 | RNVC: 2

2 Jul 1992

5975-22-269-0669
Electrical-Electronic Equipment Panel

222690669
EKC30-084U2041: RNCC: 3 | RNVC: 2
EKC30-84U2041: RNCC: 3 | RNVC: 2
084U2041: RNCC: 5 | RNVC: 2
84U2041: RNCC: 5 | RNVC: 2
EKC30: RNCC: 5 | RNVC: 9
DAN BIND 10 SIDE 200: RNCC: 6 | RNVC: 9

13 Mar 1996

5975-14-528-9229
Mecanique Pupitre

145289229
CYX/RM35 & CASTOR/002/004: RNCC: 3 | RNVC: 2
CYX/RM35 & CASTOR/002/004: RNCC: 3 | RNVC: 9

22 Feb 2002

5975-14-549-5129
Electrical Equipment Leg Section

145495129
ST1-661-052-01: RNCC: 3 | RNVC: 2

11 Apr 2006

5975-27-027-9555
Electrical-Electronic Equipment Chassis

270279555
6040-4037-3027: RNCC: 2 | RNVC: 1

21 Nov 2005

5975-27-025-2979
Electrical Cable Protector

270252979
MN-7550-0110: RNCC: 2 | RNVC: 1

22 Feb 2005

5975-99-519-7868
Frame

995197868
GHM 4X1 AISI 316: RNCC: 3 | RNVC: 2
S1007894: RNCC: 5 | RNVC: 1
730/08/13-22: RNCC: 6 | RNVC: 9

11 Oct 2005

5975-33-203-5458
Electrical-Electronic Equipment Chassis

332035458
INS0315/0006: RNCC: 3 | RNVC: 2

21 May 2004

5975-14-520-8128
Electrical Equipment Cabinet

145208128
2423-08-06: RNCC: 3 | RNVC: 2

14 Jun 2000

5975-27-047-7653
Electronic Junction Rack

270477653
LD-7233-E1: RNCC: 5 | RNVC: 9

16 Dec 2009

5975-15-200-0402
Electrical Equipment Rack

152000402
RAD-5048/10: RNCC: 3 | RNVC: 2
(241)A0069RAD-5048/10: RNCC: 5 | RNVC: 2

12 Sep 2005

5975-14-356-0860
Platine Avant

143560860
20002: RNCC: 3 | RNVC: 2
520864G0001: RNCC: 5 | RNVC: 2

5 Apr 1979

5975-14-563-9832
Junction Box

145639832
MDS81E300: RNCC: 3 | RNVC: 2

1 Apr 2010

5975-25-129-4231
Skjoete Ryggstoette

5975-12-337-2521
Cable Marker Sleeve

123372521
TMS3/16-4: RNCC: 3 | RNVC: 2
5970000458: RNCC: 5 | RNVC: 2
MBB3416D11-4: RNCC: 5 | RNVC: 2

8 Feb 1995

5975-15-193-6192
Electrical Equipment Shelf

151936192
CE-A0114361: RNCC: 3 | RNVC: 2
(241)A8434CE-A0114361: RNCC: 5 | RNVC: 2

22 Jun 2010

5975-14-401-3682
Electrical Equipment Rack

144013682
NO PRIMARY REF14-401-3682: RNCC: 3 | RNVC: 2
29762696: RNCC: 5 | RNVC: 9

5 Jun 1985

5975-99-215-8356
Stuffing Tube

992158356
NO PRIMARY REF 99-215-8356: RNCC: 3 | RNVC: 2
28713M20PASW: RNCC: 5 | RNVC: 2
614-053: RNCC: 5 | RNVC: 2

2 Jun 1997

5975-37-518-0723
Electrical Cable Protector

375180723
60825021: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60825021: RNCC: 5 | RNVC: 2

8 Jul 2009

5975-14-386-6067
Electrical Conductor Bushing

143866067
613-989-230-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5975-14-314-6305
Electrical Cable Nipple

143146305
728115-1: RNCC: 3 | RNVC: 2
603-202-1: RNCC: 3 | RNVC: 2
1-728115-1: RNCC: 5 | RNVC: 2
603-202-1: RNCC: 5 | RNVC: 2
603202-1: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-99-805-3059
Electrical Conduit Tee

998053059
FVS6-54-2: RNCC: 3 | RNVC: 2
949396: RNCC: 5 | RNVC: 2
CZ61576: RNCC: 5 | RNVC: 2
6MT491816: RNCC: 6 | RNVC: 9

25 Apr 1991

5975-12-702-8564
Kabe Zugentlastung

127028564
53-04045106514: RNCC: 3 | RNVC: 2

4 Jan 1996

5975-99-213-7265
Nonmetallic Raceway

992137265
NO PRIMARY REF 99-213-7265: RNCC: 3 | RNVC: 2
AL5961: RNCC: 5 | RNVC: 2
2500487305: RNCC: 5 | RNVC: 2

9 Jun 2011

5975-99-991-1126
Panel

999911126
P-089847-001: RNCC: 3 | RNVC: 2
P089847-001: RNCC: 5 | RNVC: 2

20 Nov 1997

5975-16-006-6274
Electrical Equipment Cabinet

160066274
8B20.00/060DZ50: RNCC: 3 | RNVC: 2
MTS 3: RNCC: 5 | RNVC: 2

13 Jan 2011

5975-12-383-5220
Cable Hanger

123835220
313 319: RNCC: 3 | RNVC: 2
EST 1-2 F/140-2: RNCC: 5 | RNVC: 2

3 Nov 2010

5975-12-326-7989
Nonmetallic Raceway

123267989
DIN43659-50X25: RNCC: 2 | RNVC: 2
150010050025: RNCC: 3 | RNVC: 2
155021: RNCC: 5 | RNVC: 2

25 Oct 1991

5975-27-016-8823
Electrical-Electronic Equipment Chassis

270168823
6030-0532-9002: RNCC: 2 | RNVC: 1

1 Apr 2003

5975-27-009-7958
Electrical Components Tie Down Strap

270097958
Z9260-48350: RNCC: 2 | RNVC: 1
710349: RNCC: 2 | RNVC: 1
81.97470.0065: RNCC: 2 | RNVC: 1

11 Sep 2001

5975-33-002-0847
Electrical Conduit Coupling

330020847
MANGUITO UNION PG-36: RNCC: 3 | RNVC: 2

18 Aug 1992

5975-12-181-9257
Abdeckung

121819257
VG95211-ML-121819257: RNCC: 2 | RNVC: 2
4581855: RNCC: 3 | RNVC: 2
5801505-204000.008: RNCC: 5 | RNVC: 2
5801505-204000-008: RNCC: 5 | RNVC: 9

28 Dec 1979

5975-14-313-1006
Electrical Standardized Components Case

143131006
NO PRIMARY REF14-313-1006: RNCC: 3 | RNVC: 2
6100000: RNCC: 5 | RNVC: 9
KO-742A: RNCC: 6 | RNVC: 9

1 Jan 1974

5975-99-251-9840
Electrical Cabinet

992519840
A1-85443: RNCC: 3 | RNVC: 2

25 Apr 1991

5975-33-209-9522
Electrical-Electronic Equipment Panel

332099522
TC-P3-007: RNCC: 3 | RNVC: 2

9 Apr 2012

5975-66-156-1677
Electrical-Electronic Equipment Panel

661561677
026-07506-001: RNCC: 3 | RNVC: 2

13 Sep 2007

5975-01-686-8354
Electrical Components Tie Down Strap

016868354
826/11445: RNCC: 3 | RNVC: 2

6 Mar 2020

5975-01-684-9011
Cable Marker Sleeve

016849011
3PS-500-2-WT: RNCC: 3 | RNVC: 2

20 Nov 2019

5975-01-682-0660
Electrical Components Tie Down Strap

016820660
N630597-01: RNCC: 3 | RNVC: 2
N630597-01: RNCC: 5 | RNVC: 2

18 Jul 2019

5975-01-682-0643
Electrical Components Tie Down Strap

016820643
1000434-01: RNCC: 3 | RNVC: 2
1000434-01: RNCC: 5 | RNVC: 2

18 Jul 2019

5975-01-679-7052
Electrical Equipment Rack

016797052
630200: RNCC: 3 | RNVC: 2

8 Apr 2019

5975-01-678-6046
Electrical Tie Down Mounting Base

016786046
CB4021E3N8: RNCC: 3 | RNVC: 2

14 Feb 2019

5975-01-678-1950
Switch Terminal Cover

016781950
AL4008099: RNCC: 3 | RNVC: 2
AL4008099: RNCC: 5 | RNVC: 2

25 Jan 2019

5975-01-678-1630
Electrical Cable Protector

016781630
12616317-1: RNCC: 3 | RNVC: 2

24 Jan 2019

5975-01-678-0597
Rear Bay Assembly

016780597
SPAL4003178: RNCC: 3 | RNVC: 2
SPAL4003178: RNCC: 5 | RNVC: 2

18 Jan 2019

5975-01-678-0568
Blank Panel

016780568
SPAL4003281: RNCC: 3 | RNVC: 2
SPAL4003281: RNCC: 5 | RNVC: 2

18 Jan 2019

5975-01-678-0531
Electrical Equipment Mounting Base

016780531
SPAL4003022: RNCC: 3 | RNVC: 2
SPAL4003022: RNCC: 5 | RNVC: 2

18 Jan 2019

5975-01-677-9699
Electrical Cable Protector

016779699
12584891-1: RNCC: 3 | RNVC: 2
12584891: RNCC: D | RNVC: 9

15 Jan 2019

5975-01-677-8912
Metallic Raceway

016778912
12584876-1: RNCC: 3 | RNVC: 2
12584876: RNCC: D | RNVC: 9

11 Jan 2019

5975-01-677-8911
Metallic Raceway

016778911
12584882-1: RNCC: 3 | RNVC: 2
12584882: RNCC: D | RNVC: 9

11 Jan 2019

5975-01-677-8905
Metallic Raceway

016778905
12584880-1: RNCC: 3 | RNVC: 2
12584880: RNCC: D | RNVC: 9

11 Jan 2019

5975-01-677-8909
Metallic Raceway

016778909
12584881-1: RNCC: 3 | RNVC: 2
12584881: RNCC: D | RNVC: 9

11 Jan 2019

5975-01-677-8073
Electrical Tie Down Mounting Base

016778073
AL4004263: RNCC: 3 | RNVC: 2
AL4004263: RNCC: 5 | RNVC: 2

8 Jan 2019

5975-01-677-7035
Rigid Metal Conduit Assembly

016777035
AL4005405: RNCC: 3 | RNVC: 2
AL4005405: RNCC: 5 | RNVC: 2

2 Jan 2019

5975-01-677-7038
Rigid Metal Conduit Assembly

016777038
AL4005385: RNCC: 3 | RNVC: 2
AL4005385: RNCC: 5 | RNVC: 2

2 Jan 2019

5975-01-677-7036
Rigid Metal Conduit Assembly

016777036
AL4005386: RNCC: 3 | RNVC: 2
AL4005386: RNCC: 5 | RNVC: 9
AL4005384: RNCC: 5 | RNVC: 9

2 Jan 2019

5975-01-677-6965
Metallic Raceway

016776965
12584878-101: RNCC: 3 | RNVC: 2
12584878: RNCC: D | RNVC: 9

31 Dec 2018

5975-01-677-6898
Electrical Cable Protector

016776898
12584877-1: RNCC: 3 | RNVC: 2

31 Dec 2018

5975-01-677-6175
Electrical Cable Protector

016776175
12584885-1: RNCC: 3 | RNVC: 2

21 Dec 2018

5975-01-677-2814
Electrical Grounding Plate

016772814
12603259: RNCC: 3 | RNVC: 2
12603259: RNCC: C | RNVC: 1

6 Dec 2018

5975-01-672-1797
Conduit Outlet

016721797
TC610 & 48-610: RNCC: 3 | RNVC: 2
3886013: RNCC: 5 | RNVC: 2

24 Apr 2018

5975-01-672-1569
Electrical Cable Protector

016721569
3560079: RNCC: 3 | RNVC: 2

23 Apr 2018

5975-01-671-3193
Electrical Components Tie Down Strap

016713193
111-12300: RNCC: 3 | RNVC: 2
10062210: RNCC: 7 | RNVC: 2

22 Mar 2018

5975-01-670-6774
Blank Panel

016706774
12603450: RNCC: 3 | RNVC: 2
12603450: RNCC: C | RNVC: 1

1 Mar 2018

5975-01-670-6772
Blank Panel

016706772
12603485: RNCC: 3 | RNVC: 2
12603485: RNCC: C | RNVC: 1

1 Mar 2018

5975-01-667-8254
Cable Hanger

016678254
SAT-10132-01: RNCC: 3 | RNVC: 2
6525NCM173712: RNCC: 5 | RNVC: 1
1448449: RNCC: 5 | RNVC: 1

1 Nov 2017

5975-01-666-7762
Ground Rod

016667762
615800: RNCC: 3 | RNVC: 2

20 Sep 2017

5975-01-666-6290
Flexible Nonmetallic Conduit

016666290
120-116-1-114BE: RNCC: 3 | RNVC: 2
3955652: RNCC: 7 | RNVC: 2

14 Sep 2017

5975-01-660-2275
Flexible Nonmetallic Conduit

016602275
M1889010: RNCC: 3 | RNVC: 2
4273737: RNCC: 7 | RNVC: 2

11 Jan 2017

5975-01-659-3356
Electrical Equipment Cabinet

016593356
12604581: RNCC: 3 | RNVC: 2

18 Nov 2016

5975-01-658-3768
Blank Panel

016583768
PWR-C1-BLANK=: RNCC: 3 | RNVC: 2
PWR-C1-BLANK: RNCC: 5 | RNVC: 2

23 Sep 2016

5975-01-657-2799
Electrical Tie Down Mounting Base

016572799
7565K56: RNCC: 3 | RNVC: 2
7565K56: RNCC: 3 | RNVC: 2
10062034: RNCC: 7 | RNVC: 2

5 Aug 2016

5975-01-653-8827
Mounting Plate

016538827
430-1018-001: RNCC: 3 | RNVC: 9

8 Apr 2016

5975-01-652-5605
Flexible Metal Conduit Assembly

016525605
901-033-866-101: RNCC: 3 | RNVC: 2
901-033-866: RNCC: D | RNVC: 9

26 Feb 2016

5975-01-650-1407
Electrical Components Tie Down Strap

016501407
L-8-18-0-C: RNCC: 3 | RNVC: 2

20 Nov 2015

5975-01-649-2263
Electrical-Electronic Equipment Chassis

016492263
1008948G-1: RNCC: 3 | RNVC: 2
PL1008948G-1: RNCC: D | RNVC: 9
1008948G: RNCC: D | RNVC: 9

21 Oct 2015

5975-01-646-3007
Junction Box

016463007
10061037-0102: RNCC: 3 | RNVC: 2
10061037: RNCC: D | RNVC: 9

17 Jul 2015

5975-01-644-0658
Electrical Equipment Rack

016440658
11018G0330: RNCC: 3 | RNVC: 2

21 Apr 2015

5975-01-642-4751
Metallic Raceway Assembly

016424751
514382: RNCC: 3 | RNVC: 2

26 Feb 2015

5975-01-641-1337
Electrical Equipment Mounting Base

016411337
037846: RNCC: 3 | RNVC: 2

9 Jan 2015

5975-01-634-0580
Electrical Sliding Shelf

016340580
1USHL-112-20: RNCC: 3 | RNVC: 9
11027C2810: RNCC: 5 | RNVC: 2

15 Dec 2014

5975-01-632-2617
Cable Hanger

016322617
512717: RNCC: 3 | RNVC: 2

14 Oct 2014

5975-01-632-2603
Cable Hanger

016322603
11018G0001: RNCC: 3 | RNVC: 2

14 Oct 2014

5975-01-632-2602
Cable Hanger

016322602
512240: RNCC: 3 | RNVC: 2

14 Oct 2014

5975-01-632-2584
Metallic Raceway Assembly

016322584
512766: RNCC: 3 | RNVC: 2

14 Oct 2014

5975-01-631-9766
Blank Panel

016319766
10006417: RNCC: 3 | RNVC: 2

2 Oct 2014

5975-01-630-8872
Flexible Nonmetallic Conduit

016308872
CLT150F-D20: RNCC: 3 | RNVC: 2

21 Aug 2014

5975-01-630-8798
Flexible Nonmetallic Conduit

016308798
CLT50F-C20: RNCC: 3 | RNVC: 2

21 Aug 2014

5975-01-630-7860
Electrical Components Tie Down Strap

016307860
EP-11-50-0-D: RNCC: 3 | RNVC: 2
10KP451: RNCC: 7 | RNVC: 2

19 Aug 2014

5975-01-630-6886
Chassis Base

016306886
H302A021-01: RNCC: 3 | RNVC: 2

13 Aug 2014

5975-01-630-5959
Electrical Cable Assembly Protector

016305959
12566064: RNCC: 3 | RNVC: 2

11 Aug 2014

5975-01-630-3262
Electronic Equipment Mounting Tray

016303262
12566154: RNCC: 3 | RNVC: 2

31 Jul 2014

5975-01-630-3245
Electronic Equipment Mounting Tray

016303245
12566648: RNCC: 3 | RNVC: 2

31 Jul 2014

5975-01-630-3232
Electrical-Electronic Equipment Panel

016303232
12566086: RNCC: 3 | RNVC: 2

31 Jul 2014

5975-01-630-3233
Electrical Equipment Shelf

016303233
12565934: RNCC: 3 | RNVC: 2

31 Jul 2014

5975-01-629-8271
Electrical Equipment Shelf

016298271
12565973: RNCC: 3 | RNVC: 2

16 Jul 2014

5975-01-629-8250
Electrical-Electronic Equipment Chassis

016298250
12565945: RNCC: 3 | RNVC: 2

16 Jul 2014

5975-01-629-8251
Electrical-Electronic Equipment Chassis

016298251
12565943: RNCC: 3 | RNVC: 2

16 Jul 2014

5975-01-629-8249
Electrical-Electronic Equipment Chassis

016298249
12565946: RNCC: 3 | RNVC: 2

16 Jul 2014

5975-01-628-6673
Electrical Equipment Rack

016286673
10-2834442-1: RNCC: 3 | RNVC: 2
MC-106B: RNCC: 5 | RNVC: 1

5 Jun 2014

5975-01-627-7574
Electrical Equipment Shelf

016277574
3912881: RNCC: 3 | RNVC: 2
3912881: RNCC: 5 | RNVC: 9

25 Apr 2014

5975-01-627-7568
Electrical Equipment Shelf

016277568
3915284: RNCC: 3 | RNVC: 2
3915284: RNCC: 5 | RNVC: 9

25 Apr 2014

5975-01-626-9095
Electrical Components Tie Down Strap

016269095
T18R0: RNCC: 3 | RNVC: 2

25 Mar 2014

5975-01-625-9224
Electrical Wall Plate

016259224
10012145: RNCC: 3 | RNVC: 2

20 Feb 2014

5975-01-625-1488
Electrical Equipment Mounting Base

016251488
11018F0194: RNCC: 3 | RNVC: 2

27 Jan 2014

5975-01-625-1482
Metallic Raceway Assembly

016251482
11018G0339: RNCC: 3 | RNVC: 2

27 Jan 2014

5975-01-625-1470
Electrical Equipment Shelf

016251470
11018G0324: RNCC: 3 | RNVC: 2

27 Jan 2014

5975-01-625-1466
Electrical Equipment Leg

016251466
11018G0325: RNCC: 3 | RNVC: 2

27 Jan 2014

5975-01-625-1460
Rigid Metal Conduit

016251460
JKLSLR100: RNCC: 3 | RNVC: 2
517230: RNCC: 7 | RNVC: 2

27 Jan 2014

5975-01-623-8393
Interconnecting Box

016238393
WPBD452: RNCC: 3 | RNVC: 9
10002521: RNCC: 5 | RNVC: 2

4 Dec 2013

5975-01-618-4455
Electrical Cable Nipple

016184455
487N8V14: RNCC: 3 | RNVC: 2

24 Apr 2013

5975-01-618-4357
Insulator Bracket

016184357
4003220: RNCC: 3 | RNVC: 2

24 Apr 2013

5975-01-617-6712
Junction Box

016176712
330-0109-000: RNCC: 3 | RNVC: 2

29 Mar 2013

5975-01-617-1075
Flexible Nonmetallic Conduit

016171075
92N3682: RNCC: 3 | RNVC: 2

12 Mar 2013

5975-01-617-0154
Rigid Metal Conduit

016170154
7126K12: RNCC: 3 | RNVC: 2

7 Mar 2013

5975-01-616-5806
Electrical Equipment Mounting Base

016165806
SRC2198-4: RNCC: 3 | RNVC: 2
SRC2198-4: RNCC: 7 | RNVC: 2

20 Feb 2013

5975-01-616-1364
Electrical Wall Plate

016161364
12566405: RNCC: 3 | RNVC: 2

4 Feb 2013

5975-01-615-8488
Flexible Metal Conduit

016158488
73145K3: RNCC: 3 | RNVC: 2
73145K3: RNCC: 3 | RNVC: 2

24 Jan 2013

5975-01-614-0552
Electrical Grounding Plate

016140552
12566494: RNCC: 3 | RNVC: 2

26 Nov 2012

5975-01-613-0589
Electrical-Electronic Equipment Chassis

016130589
OT-DTCR-2: RNCC: 3 | RNVC: 2
H469729-1: RNCC: 3 | RNVC: 2

29 Oct 2012

5975-01-608-6528
Electrical Cable Protector

016086528
10014B0529: RNCC: 3 | RNVC: 2

6 Jul 2012

5975-01-608-6527
Electrical Cable Protector

016086527
10014B0017: RNCC: 3 | RNVC: 2

6 Jul 2012

5975-01-608-6526
Electrical Cable Protector

016086526
10014B0530: RNCC: 3 | RNVC: 2

6 Jul 2012

5975-01-607-6851
Metallic Raceway

016076851
3838579C1: RNCC: 3 | RNVC: 2

12 Jun 2012

5975-01-605-7776
Electrical Cable Protector

016057776
4296813: RNCC: 3 | RNVC: 2
4296813: RNCC: 5 | RNVC: 2

25 Apr 2012

5975-01-603-8531
Electrical Cable Protector

016038531
40810019: RNCC: 3 | RNVC: 2
40810019: RNCC: 3 | RNVC: 9
40810019: RNCC: 5 | RNVC: 2

19 Mar 2012

5975-01-603-2145
Raceway Cover

016032145
40930004: RNCC: 3 | RNVC: 2
40930004: RNCC: 5 | RNVC: 9

24 Feb 2012

5975-01-602-7768
Cable Hanger

016027768
10009598: RNCC: 3 | RNVC: 2

6 Feb 2012

5975-01-602-6419
Electrical Equipment Rack

016026419
4296579: RNCC: 3 | RNVC: 2
4296579: RNCC: 5 | RNVC: 2

2 Feb 2012

5975-01-602-6414
Electrical Equipment Rack

016026414
4297741: RNCC: 3 | RNVC: 2
4297741: RNCC: 5 | RNVC: 2

2 Feb 2012

5975-01-602-6402
Electrical Equipment Rack

016026402
4308828: RNCC: 3 | RNVC: 2
4308828: RNCC: 5 | RNVC: 2

2 Feb 2012

5975-01-602-6388
Electrical Equipment Rack

016026388
4297724: RNCC: 3 | RNVC: 2
4297724: RNCC: 5 | RNVC: 2

2 Feb 2012

5975-01-601-8044
Electrical-Electronic Equipment Panel

016018044
04-2816538-1: RNCC: 3 | RNVC: 2

25 Jan 2012

5975-01-601-1840
Ground Rod

016011840
13162: RNCC: 3 | RNVC: 2
13162B: RNCC: 5 | RNVC: 9
13162: RNCC: 5 | RNVC: 9

11 Jan 2012

5975-01-601-0847
Metallic Raceway Assembly

016010847
1F-7854: RNCC: 3 | RNVC: 2

5 Jan 2012

5975-01-600-6849
Metallic Raceway

016006849
3689933C3: RNCC: 3 | RNVC: 2

14 Dec 2011

5975-01-600-5369
Cable Strain Relief Bushing

016005369
S2121: RNCC: 3 | RNVC: 2

7 Dec 2011

5975-01-600-1500
Electrical Components Tie Down Strap

016001500
63461: RNCC: 3 | RNVC: 2
10010750: RNCC: 7 | RNVC: 2
S000193: RNCC: D | RNVC: 9

10 Nov 2011

5975-01-599-9053
Junction Box

015999053
2203-800-002: RNCC: 3 | RNVC: 9
2202-900-002427: RNCC: D | RNVC: 9

27 Oct 2011

5975-01-598-9797
Conduit Outlet Cover

015989797
10034699: RNCC: 3 | RNVC: 2

7 Sep 2011

5975-01-598-9786
Conduit Outlet

015989786
10034700: RNCC: 3 | RNVC: 2

7 Sep 2011

5975-01-598-5668
Electrical Tie Down Mounting Base

015985668
TM3-X2: RNCC: 3 | RNVC: 2
3614752C1: RNCC: 5 | RNVC: 2
3614752C1: RNCC: 5 | RNVC: 2

12 Aug 2011

5975-01-597-6571
Electrical Equipment Drawer

015976571
D2: RNCC: 3 | RNVC: 9

20 Jun 2011

5975-01-597-6453
Electrical-Electronic Equipment Chassis

015976453
4305611: RNCC: 3 | RNVC: 2
4305611: RNCC: 5 | RNVC: 2

17 Jun 2011

5975-01-597-5074
Electrical Tie Down Mounting Base

015975074
HDM250HIRC2: RNCC: 3 | RNVC: 2
10062209: RNCC: 7 | RNVC: 2

10 Jun 2011

5975-01-596-7461
Electrical Components Tie Down Strap

015967461
7130K31: RNCC: 3 | RNVC: 2
7130K31: RNCC: 5 | RNVC: 2

24 May 2011

5975-01-594-0982
Electrical Components Tie Down Strap

015940982
473321C1: RNCC: 3 | RNVC: 2
PT08-28991: RNCC: D | RNVC: 9

22 Apr 2011

5975-01-591-9775
Junction Box Assembly

015919775
H378882-1: RNCC: 3 | RNVC: 2

16 Feb 2011

5975-01-591-9511
Electrical-Electronic Equipment Panel

015919511
513336: RNCC: 3 | RNVC: 2

16 Feb 2011

5975-01-591-9494
Electrical Cable Assembly Protector

015919494
513207: RNCC: 3 | RNVC: 2

16 Feb 2011

5975-01-591-9490
Electrical Equipment Shelf

015919490
513203: RNCC: 3 | RNVC: 2

16 Feb 2011

5975-01-591-9489
Electrical Equipment Shelf

015919489
513204: RNCC: 3 | RNVC: 2

16 Feb 2011

5975-01-591-9485
Electrical Equipment Leg

015919485
513198: RNCC: 3 | RNVC: 2

16 Feb 2011

5975-01-591-9484
Electrical Equipment Shelf

015919484
513202: RNCC: 3 | RNVC: 2

16 Feb 2011

5975-01-591-9488
Electrical Equipment Leg

015919488
513199: RNCC: 3 | RNVC: 2

16 Feb 2011

5975-01-591-9487
Electrical Equipment Leg

015919487
513200: RNCC: 3 | RNVC: 2

16 Feb 2011

5975-01-591-3825
Electrical Cable Protector

015913825
4308763: RNCC: 3 | RNVC: 2
4308763: RNCC: 5 | RNVC: 2

24 Jan 2011

5975-01-590-5424
Electrical Equipment Mounting Base

015905424
12050-3000-01: RNCC: 3 | RNVC: 2

9 Dec 2010

5975-01-589-6466
Electrical Tie Down Mounting Base

015896466
CB3019A3N750: RNCC: 3 | RNVC: 2
3684463: RNCC: 7 | RNVC: 2
3684463: RNCC: 7 | RNVC: 9

1 Nov 2010

5975-01-589-4340
Junction Box

015894340
4007690: RNCC: 3 | RNVC: 2

26 Oct 2010

5975-01-588-6200
Electrical Conduit Adapter

015886200
SAEJ5148-6140139C: RNCC: 3 | RNVC: 2
SAEJ5148-6140139C: RNCC: 5 | RNVC: 2
SAEJ5148-6140139C: RNCC: 5 | RNVC: 9

27 Sep 2010

5975-01-587-6287
Electrical Tie Down Mounting Base

015876287
TD-175-12ZI: RNCC: 3 | RNVC: 2
TD-175-12Z1: RNCC: 5 | RNVC: 9

13 Aug 2010

5975-01-587-4453
Electrical Tie Down Mounting Base

015874453
MT2023007CST: RNCC: 3 | RNVC: 2
3570838C1: RNCC: 5 | RNVC: 2
3570838C1: RNCC: 5 | RNVC: 9

6 Aug 2010

5975-01-587-3246
Electrical Equipment Mounting Base

015873246
3688757C3: RNCC: 3 | RNVC: 2
3688757C2: RNCC: 5 | RNVC: 9
3688757C2L: RNCC: 5 | RNVC: 9

3 Aug 2010

5975-01-587-2606
Junction Box

015872606
10005666: RNCC: 3 | RNVC: 2

29 Jul 2010

5975-01-586-9888
Stuffing Tube

015869888
4305545: RNCC: 3 | RNVC: 2
4305545: RNCC: 5 | RNVC: 2

21 Jul 2010

5975-01-586-9590
Electric Wall Plate

015869590
4305528: RNCC: 3 | RNVC: 2
4305528: RNCC: 5 | RNVC: 2

20 Jul 2010

5975-01-586-9597
Electronic Equipment Mounting Tray

015869597
4305614: RNCC: 3 | RNVC: 2
4305614: RNCC: 5 | RNVC: 2

20 Jul 2010

5975-01-586-9588
Electrical Wall Plate

015869588
4305475: RNCC: 3 | RNVC: 2
4305475: RNCC: 5 | RNVC: 2

20 Jul 2010

5975-01-586-9587
Electronic Equipment Mounting Tray

015869587
4297348: RNCC: 3 | RNVC: 2
4297348: RNCC: 5 | RNVC: 2

20 Jul 2010

5975-01-586-8616
Interconnecting Box

015868616
MCL-1291-0227: RNCC: 3 | RNVC: 2
29KP413: RNCC: 7 | RNVC: 2

16 Jul 2010

5975-01-583-8048
Electrical Tie Down Mounting Base

015838048
ABMM-AT-C0: RNCC: 3 | RNVC: 2
644-ABMM-AT-C0: RNCC: 5 | RNVC: 2
79DH391-00: RNCC: 5 | RNVC: 2
ABMM-AT-CO: RNCC: 5 | RNVC: 9

7 Apr 2010

5975-01-581-4983
Junction Box

015814983
2423054: RNCC: 3 | RNVC: 2

20 Jan 2010

5975-01-579-8340
Electrical Conduit Ferrule Anchor Plate

015798340
415321: RNCC: 3 | RNVC: 2

24 Nov 2009

5975-01-578-6278
Cable Collar

015786278
3835736C1: RNCC: 3 | RNVC: 2

14 Oct 2009

5975-01-577-8879
Junction Box

015778879
4003219: RNCC: 3 | RNVC: 2

22 Sep 2009

5975-01-577-7355
Electrical-Electronic Equipment Panel

015777355
10000721: RNCC: 3 | RNVC: 2

16 Sep 2009

5975-01-577-7353
Electrical Components Tie Down Strap

015777353
63475: RNCC: 3 | RNVC: 2
12759-00869: RNCC: C | RNVC: 1

16 Sep 2009

5975-01-577-5397
Electrical-Electronic Equipment Panel

015775397
10000723: RNCC: 3 | RNVC: 2

10 Sep 2009

5975-01-577-4775
Electrical-Electronic Equipment Panel

015774775
10003062: RNCC: 3 | RNVC: 2

8 Sep 2009

5975-01-577-2387
Electrical Equipment Mounting Base

015772387
3829416: RNCC: 3 | RNVC: 2
3829416: RNCC: 5 | RNVC: 9

31 Aug 2009

5975-01-576-7363
Electrical Equipment Mounting Base

015767363
4293944: RNCC: 3 | RNVC: 2
4293944: RNCC: 5 | RNVC: 2

12 Aug 2009

5975-01-576-5279
Electrical Equipment Shelf

015765279
4293922: RNCC: 3 | RNVC: 2
4293922: RNCC: 5 | RNVC: 2

5 Aug 2009

5975-01-576-5281
Electrical Equipment Shelf

015765281
4293923: RNCC: 3 | RNVC: 2
4293923: RNCC: 5 | RNVC: 2

5 Aug 2009

NSN 5975-01-576-1086 015761086 STRAP,SAFETY,WIRE STRAND HANGER

5975-01-576-1086
Wire Strand Hanger Safety Strap

015761086
MS20995-C32: RNCC: 3 | RNVC: 9

21 Jul 2009

5975-01-576-0920
Electrical Equipment Rack

015760920
4296646: RNCC: 3 | RNVC: 2
4296646: RNCC: 5 | RNVC: 2

21 Jul 2009

5975-01-576-0867
Electrical Cable Protector

015760867
4297632: RNCC: 3 | RNVC: 2
4297632: RNCC: 5 | RNVC: 2

21 Jul 2009

5975-01-576-0548
Electrical Cable Protector

015760548
4297380: RNCC: 3 | RNVC: 2
4297380: RNCC: 5 | RNVC: 2

21 Jul 2009

5975-01-576-0540
Electrical Cable Protector

015760540
4296573: RNCC: 3 | RNVC: 2
4296573: RNCC: 5 | RNVC: 2

21 Jul 2009

5975-01-576-0541
Electrical Cable Protector

015760541
4297379: RNCC: 3 | RNVC: 2
4297379: RNCC: 5 | RNVC: 2

21 Jul 2009

5975-01-576-0542
Electrical Cable Protector

015760542
4297378: RNCC: 3 | RNVC: 2
4297378: RNCC: 5 | RNVC: 2

21 Jul 2009

5975-01-576-0337
Electrical Equipment Rack

015760337
4296577: RNCC: 3 | RNVC: 2
4296577: RNCC: 5 | RNVC: 2

21 Jul 2009

5975-01-575-8519
Electrical-Electronic Equipment Chassis

015758519
A3210915-3: RNCC: 3 | RNVC: 2
A3210915: RNCC: D | RNVC: 9

15 Jul 2009

5975-01-575-4161
Electrical-Electronic Equipment Panel

015754161
802025334320-1: RNCC: 3 | RNVC: 2

1 Jul 2009

5975-01-571-2189
Electrical Equipment Rack

015712189
4293920: RNCC: 3 | RNVC: 2
4293920: RNCC: 5 | RNVC: 2

28 Jan 2009

5975-01-568-7356
Electrical-Electronic Equipment Chassis

015687356
3113869C91: RNCC: 3 | RNVC: 2

7 Nov 2008

5975-01-568-6430
Electrical Cable Protector

015686430
3826282C2L: RNCC: 3 | RNVC: 2
3113411C1L: RNCC: 5 | RNVC: 9

8 Sep 2010

5975-01-566-6024
Electrical Equipment Shelf

015666024
3686306C1: RNCC: 3 | RNVC: 2
3686306C1L: RNCC: 5 | RNVC: 9

4 Sep 2008

5975-01-565-2217
Electrical Box Connector

015652217
3326: RNCC: 3 | RNVC: 2

16 Jul 2008

5975-01-564-0910
Flexible Metal Conduit Assembly

015640910
260A809-7: RNCC: 3 | RNVC: 2
740NC102NFH111H111-12-72: RNCC: 5 | RNVC: 2

4 Jun 2008

5975-01-564-0705
Flexible Metal Conduit Assembly

015640705
260A808-10: RNCC: 3 | RNVC: 2
749NC691NFT10H25A40-72: RNCC: 5 | RNVC: 2

3 Jun 2008

5975-01-564-0594
Flexible Metal Conduit Assembly

015640594
260A808-9: RNCC: 3 | RNVC: 2
749NC691NFT08H25A32-72: RNCC: 5 | RNVC: 2

3 Jun 2008

5975-01-560-4736
Guide Rail

015604736
0415 1882: RNCC: 3 | RNVC: 2

31 Jan 2008

5975-01-559-8238
Electronic Equipment Mounting Tray

015598238
3014-0019-03-3: RNCC: 3 | RNVC: 2
3014-0019-03-1: RNCC: 5 | RNVC: 9

8 Jan 2008

5975-01-559-8215
Electronic Equipment Mounting Tray

015598215
3014-0020-03-2: RNCC: 3 | RNVC: 2
3014-0020-03-1: RNCC: 5 | RNVC: 9

8 Jan 2008

5975-01-558-1008
Cable Hanger

015581008
1001727: RNCC: 3 | RNVC: 2

1 Nov 2007

5975-01-557-0694
Electrical-Electronic Equipment Chassis

015570694
1002457: RNCC: 3 | RNVC: 2

11 Oct 2007

5975-01-556-5811
Electrical Equipment Rack

015565811
3113151C92: RNCC: 3 | RNVC: 2
3141000: RNCC: 5 | RNVC: 2
3113151C91L: RNCC: 5 | RNVC: 9
3113151C92L: RNCC: 5 | RNVC: 9
3113151C92L: RNCC: 5 | RNVC: 9

3 Oct 2007

5975-01-556-4150
Right Cable Tray

015564150
4285079: RNCC: 3 | RNVC: 2
4285079: RNCC: 5 | RNVC: 2

2 Oct 2007

5975-01-555-9887
Electrical Equipment Rack Base

015559887
7185152-54: RNCC: 3 | RNVC: 2

20 Sep 2007

5975-01-555-9889
Electrical Equipment Rack Base

015559889
7185152-55: RNCC: 3 | RNVC: 2

20 Sep 2007

5975-01-555-5973
Chassis Air System

015555973
3701424: RNCC: 3 | RNVC: 2
3701424: RNCC: 5 | RNVC: 9

7 Sep 2007

5975-01-555-5769
Conduit Outlet

015555769
3698268: RNCC: 3 | RNVC: 2
3698268: RNCC: 5 | RNVC: 9

7 Sep 2007

5975-01-555-5767
Conduit Outlet

015555767
3698264: RNCC: 3 | RNVC: 2
3698264: RNCC: 5 | RNVC: 9

7 Sep 2007

5975-01-554-3780
Electrical-Electronic Equipment Chassis

015543780
A3179881-1: RNCC: 3 | RNVC: 2
PLA3179881: RNCC: D | RNVC: 9
A3179881: RNCC: D | RNVC: 9

7 Aug 2007

5975-01-548-4294
Electrical Components Tie Down Strap

015484294
A3184330: RNCC: 3 | RNVC: 2

22 Feb 2007

5975-01-547-3797
Electrical Tie Down Mounting Base

015473797
8409-0386: RNCC: 3 | RNVC: 9
8409-0386: RNCC: 5 | RNVC: 2
30295-1000: RNCC: D | RNVC: 9

18 Jan 2007

5975-01-547-2847
Electrical Tie Down Mounting Base

015472847
81N2596: RNCC: 3 | RNVC: 2

17 Jan 2007

5975-01-547-2529
Electrical Tie Down Mounting Base

015472529
TA1S8-MO: RNCC: 3 | RNVC: 2
30295-1910: RNCC: D | RNVC: 9

16 Jan 2007

5975-01-544-6768
Electrical Equipment Rack

015446768
2571-GG5D-003: RNCC: 3 | RNVC: 2
2571-GG5A-003: RNCC: 5 | RNVC: 9
2571-GG5A-003: RNCC: C | RNVC: 1

19 Oct 2006

5975-01-544-3616
Metallic Raceway

015443616
0287-GG3-023: RNCC: 3 | RNVC: 9
0287-GG3-023: RNCC: C | RNVC: 1

11 Oct 2006

5975-01-542-1357
Interconnecting Box

015421357
92-3603: RNCC: 3 | RNVC: 2
98-5656: RNCC: 5 | RNVC: 9

24 Jul 2006

5975-01-541-1591
Electrical Cable Protector

015411591
0636-GG5-J10: RNCC: 3 | RNVC: 9
0636-GG5-J10: RNCC: C | RNVC: 1

16 Jun 2006

5975-01-541-1589
Electrical Cable Protector

015411589
0636-GG5-J09: RNCC: 3 | RNVC: 9
0636-GG5-J09: RNCC: C | RNVC: 1

16 Jun 2006

5975-01-541-1581
Electrical Cable Protector

015411581
0636-GG5-J07: RNCC: 3 | RNVC: 2
0636-GG5-J07: RNCC: 3 | RNVC: 9

16 Jun 2006

5975-01-541-1571
Electrical Cable Protector

015411571
0636-GG5-J06: RNCC: 3 | RNVC: 2
0636-GG5-J06: RNCC: 3 | RNVC: 9

16 Jun 2006

5975-01-541-1294
Cable Terminal Chamber

015411294
0636-GG5-F01: RNCC: 3 | RNVC: 2
0636-GG5-F01: RNCC: 3 | RNVC: 9
0636-GG5-F01: RNCC: 5 | RNVC: 2

15 Jun 2006

5975-01-540-8800
Flexible Nonmetallic Conduit

015408800
M1883008: RNCC: 3 | RNVC: 9
2KP898: RNCC: 5 | RNVC: 9
M1883008: RNCC: 5 | RNVC: 9
2KP898: RNCC: 7 | RNVC: 2

7 Jun 2006

5975-01-540-8809
Flexible Nonmetallic Conduit

015408809
M1883007: RNCC: 3 | RNVC: 9
2KP899: RNCC: 5 | RNVC: 9
M1883007: RNCC: 5 | RNVC: 9
2KP899: RNCC: 7 | RNVC: 2

7 Jun 2006

5975-01-540-3399
Junction Box

015403399
174235: RNCC: 3 | RNVC: 2
174235: RNCC: 5 | RNVC: 2

16 May 2006

5975-01-534-5790
Terminal Cover Cable Chamber

015345790
C1.5WH6: RNCC: 3 | RNVC: 2
34518-17: RNCC: D | RNVC: 9

26 Oct 2005

Load More Results