What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 109 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 109of 491

5975-01-281-1982
Electrical Equipment Mounting Base

012811982
WG9235A1: RNCC: 3 | RNVC: 2
WG9235-A1: RNCC: 5 | RNVC: 2

18 Jun 1988

5975-01-280-0481
Electrical Components Tie Down Strap

012800481
7130K12: RNCC: 3 | RNVC: 2
001-002941-002: RNCC: 5 | RNVC: 2
10340190: RNCC: 6 | RNVC: 9

29 May 1988

5975-01-278-9815
Electrical Box Connector

012789815
SHC-1016: RNCC: 3 | RNVC: 2
99AD1679-76-101: RNCC: 5 | RNVC: 9

12 May 1988

5975-01-283-6257
Junction Box Cover

012836257
848998: RNCC: 3 | RNVC: 9

10 Aug 1988

5975-01-068-0500
Cable Strain Relief Bushing

010680500
SR-2P-4: RNCC: 3 | RNVC: 2

15 Nov 1978

5975-01-088-5993
Junction Box

010885993
4B69135-105A: RNCC: 3 | RNVC: 2

16 Jan 1980

5975-01-125-6777
Junction Box Cover

011256777
11677687: RNCC: 3 | RNVC: 2

1 Feb 1982

5975-01-129-2039
Electronic Equipment Mounting Tray

011292039
232-36141-1: RNCC: 3 | RNVC: 2

4 Apr 1982

5975-01-127-7593
Electrical Conduit Adapter

011277593
S3195-2203-8W: RNCC: 3 | RNVC: 1
31A00003L20C12: RNCC: 3 | RNVC: 1
CRN3444-33: RNCC: 3 | RNVC: 2
710FS137D33A3: RNCC: 3 | RNVC: 2
ST5M1331L20C12: RNCC: 5 | RNVC: 1
10134284: RNCC: 6 | RNVC: 9

7 Mar 1982

5975-01-130-2578
Junction Box Cover

011302578
65560-03150-119: RNCC: 3 | RNVC: 2
65560-03150-119: RNCC: 5 | RNVC: 2
65560-03150-103: RNCC: 5 | RNVC: 9
65560-03150-109: RNCC: 5 | RNVC: 9

19 Apr 1982

5975-01-121-0745
Small Cable Tie

011210745
81085: RNCC: 3 | RNVC: 2
81085: RNCC: 5 | RNVC: 9
81085: RNCC: 5 | RNVC: 9

30 Oct 1981

5975-01-188-0134
Electrical Tie Down Mounting Base

011880134
FCPI2-20: RNCC: 3 | RNVC: 2
FCPI2-20: RNCC: 5 | RNVC: 9
ES8616-02A: RNCC: 5 | RNVC: 9

29 Aug 1984

5975-01-189-5817
Cable Marker Sleeve

011895817
708406-6: RNCC: 3 | RNVC: 2

17 Sep 1984

5975-01-191-4737
Cable Support Strip

011914737
406-075-148-111: RNCC: 3 | RNVC: 2

9 Oct 1984

5975-01-258-8246
Conduit Outlet

012588246
GEMT-1: RNCC: 3 | RNVC: 2

8 Jul 1987

5975-01-219-7193
Electrical Conduit Adapter

012197193
K15K0017-2FWF1: RNCC: 3 | RNVC: 2
K15K017-2FWF1: RNCC: 5 | RNVC: 2
K15K0017: RNCC: 5 | RNVC: 9
K15K0017: RNCC: 7 | RNVC: 1

1 Nov 1985

5975-01-261-1164
Electrical Components Tie Down Strap

012611164
TY53418PX: RNCC: 3 | RNVC: 2
C5078204-1: RNCC: 5 | RNVC: 9
5035611-1: RNCC: 5 | RNVC: 9

9 Aug 1987

5975-01-262-5329
Electrical Nonmetallic Conduit Assembly

012625329
R58HA33B34A010: RNCC: 3 | RNVC: 1
R58HA33B34A010: RNCC: 5 | RNVC: 1
R58HA33B34A010: RNCC: 5 | RNVC: 9

30 Aug 1987

5975-01-068-0462
Junction Box Cover

010680462
S1003GN: RNCC: 3 | RNVC: 2
BACC50AF1: RNCC: 7 | RNVC: 2

15 Nov 1978

5975-01-068-4075
Electrical Cable Nipple

010684075
12273147-430: RNCC: 1 | RNVC: 2
202F242-50: RNCC: 3 | RNVC: 2
313F353-8: RNCC: 5 | RNVC: 2
313F353-8: RNCC: 5 | RNVC: 9
CAN68335BC01-50: RNCC: 5 | RNVC: 9
313F353-8: RNCC: C | RNVC: 1

25 Nov 1978

5975-01-073-9727
Electrical Tie Down Mounting Base

010739727
12279483: RNCC: 3 | RNVC: 2

24 Mar 1979

5975-01-074-6890
Conduit Outlet

010746890
GUAT36: RNCC: 3 | RNVC: 2
ST41D9-7: RNCC: 5 | RNVC: 9

6 Apr 1979

5975-01-074-5469
Electrical Conduit Adapter

010745469
59617: RNCC: 3 | RNVC: 2
E943F: RNCC: 5 | RNVC: 2
E943F: RNCC: 5 | RNVC: 2
E943F: RNCC: 5 | RNVC: 9
00034481062035: RNCC: 5 | RNVC: 9
033746-0003: RNCC: C | RNVC: 1

3 Apr 1979

5975-01-075-5405
Conduit Outlet

010755405
FSC-1-50L: RNCC: 3 | RNVC: 2
FSC1019: RNCC: 5 | RNVC: 9

23 Apr 1979

5975-01-076-1831
Electrical Wall Plate

010761831
12272613: RNCC: 3 | RNVC: 2

2 May 1979

5975-01-079-4082
Box Junction Cover

010794082
M129-55: RNCC: 3 | RNVC: 2
M129-55: RNCC: 5 | RNVC: 9

5 Jul 1979

5975-01-079-4086
Box Junction Cover

010794086
M129-53: RNCC: 3 | RNVC: 2
M129-53: RNCC: 5 | RNVC: 9

5 Jul 1979

5975-01-082-5430
Electrical Tie Down Mounting Base

010825430
TC5345A: RNCC: 3 | RNVC: 2
74B059271-201: RNCC: 7 | RNVC: 1

5 Sep 1979

5975-01-082-3203
Blank Panel

010823203
12683B: RNCC: 3 | RNVC: 2

31 Aug 1979

5975-01-082-6670
Electronic Junction Rack

010826670
CTJ-3D-05: RNCC: 3 | RNVC: 2
10190729: RNCC: 6 | RNVC: 9

7 Sep 1979

5975-01-085-4517
Electrical Conduit Tee

010854517
EYS-6: RNCC: 3 | RNVC: 2
55856: RNCC: 5 | RNVC: 2
55856: RNCC: 5 | RNVC: 9
55856: RNCC: 7 | RNVC: 9

8 Nov 1979

5975-01-096-9002
Resistor Box Assemb

010969002
70550-01132-044: RNCC: 3 | RNVC: 2
70550-01132-041: RNCC: 5 | RNVC: 1

30 Jun 1980

5975-01-103-4608
Electrical-Electronic Equipment Chassis

011034608
08481-20011: RNCC: 3 | RNVC: 9
08481-20011: RNCC: 5 | RNVC: 9
08481-20011: RNCC: C | RNVC: 1

13 Nov 1980

5975-01-110-5578
Electrical Grounding Plate

011105578
3365615-1: RNCC: 3 | RNVC: 2
3365615-1: RNCC: 5 | RNVC: 2
3365615-1: RNCC: 5 | RNVC: 2
5975PL0802179: RNCC: 6 | RNVC: 9

2 Apr 1981

5975-01-111-2030
Nonmetalic Raceway Conduit

011112030
E2X2LG6: RNCC: 3 | RNVC: 2
SL-2X2-G: RNCC: 5 | RNVC: 2

12 Apr 1981

5975-01-112-6591
Rigid Metal Conduit Assembly

011126591
4B69142-101A: RNCC: 3 | RNVC: 2

8 May 1981

5975-01-112-6598
Rigid Metal Conduit Assembly

011126598
4B69143-125A: RNCC: 3 | RNVC: 2
4B69143-125A: RNCC: 5 | RNVC: 9

8 May 1981

5975-01-114-7422
Electrical Cable Protector

011147422
12299309: RNCC: 3 | RNVC: 2
10387880: RNCC: 6 | RNVC: 9

22 Jun 1981

5975-01-114-8071
Cable Hanger

011148071
101-107-104: RNCC: 3 | RNVC: 2
1031: RNCC: 5 | RNVC: 2
1031: RNCC: 5 | RNVC: 2

23 Jun 1981

5975-01-116-4471
Electrical-Electronic Equipment Chassis

011164471
484419-1-2: RNCC: 3 | RNVC: 2

26 Jul 1981

5975-01-122-5834
Junction Box

011225834
3-MBS: RNCC: 3 | RNVC: 2
692: RNCC: 5 | RNVC: 2
401-4676882 ITEM 8: RNCC: 5 | RNVC: 2

25 Nov 1981

5975-01-124-0352
Junction Box

011240352
7302RAC: RNCC: 3 | RNVC: 2
7302: RNCC: 3 | RNVC: 9
7555: RNCC: 5 | RNVC: 9

27 Dec 1981

5975-01-125-3326
Electrical Components Tie Down Strap

011253326
187222: RNCC: 3 | RNVC: 2
187222: RNCC: 5 | RNVC: 9

25 Jan 1982

5975-01-127-7595
Electrical Box Connector

011277595
SHC-1027: RNCC: 3 | RNVC: 2
64-0180: RNCC: C | RNVC: 1
DB934: RNCC: E | RNVC: 8

7 Mar 1982

5975-01-127-7592
Electrical Conduit Adapter

011277592
710FS137D09A3: RNCC: 3 | RNVC: 2
S3195-0901-8W: RNCC: 3 | RNVC: 2
CRN3444-09: RNCC: 3 | RNVC: 2
ST5M1331L12C06: RNCC: 5 | RNVC: 2
6430-06-033-13: RNCC: 5 | RNVC: 9
31A00003L12C06: RNCC: 5 | RNVC: 9
10134287: RNCC: 6 | RNVC: 9

7 Mar 1982

5975-01-130-8497
Electrical-Electronic Equipment Chassis

011308497
659-0989-002: RNCC: 3 | RNVC: 2
641-4348-002: RNCC: 5 | RNVC: 9
659-0989-005: RNCC: 5 | RNVC: 9

29 Apr 1982

5975-01-132-7063
Flexible Metal Conduit Assembly

011327063
4B69143-145A: RNCC: 3 | RNVC: 2
4B69143-145A: RNCC: 3 | RNVC: 2
4B69143-145A: RNCC: 5 | RNVC: 1
251616: RNCC: 5 | RNVC: 2

3 Jun 1982

5975-01-132-7061
Flexible Metal Conduit Assembly

011327061
4B69142-191A: RNCC: 3 | RNVC: 2
4B69142-191A: RNCC: 3 | RNVC: 2
4B69142-191A: RNCC: 3 | RNVC: 2
4B69142-191A: RNCC: 3 | RNVC: 2

3 Jun 1982

5975-01-139-3860
Cable Strain Relief Bushing

011393860
1237: RNCC: 3 | RNVC: 2
53900001: RNCC: 5 | RNVC: 9
6P3-4: RNCC: 5 | RNVC: 9

30 Sep 1982

5975-01-142-0509
Cable Hanger

011420509
12311391: RNCC: 3 | RNVC: 2

9 Nov 1982

5975-01-142-2176
Electrical Conduit Bend

011422176
ANSI/UL797: RNCC: 3 | RNVC: 1
12267098-2: RNCC: 3 | RNVC: 2

13 Nov 1982

5975-01-142-8420
Flexible Metal Conduit

011428420
CAB20-3N: RNCC: 3 | RNVC: 2
SM 83-03N: RNCC: E | RNVC: 8
750-085-12: RNCC: E | RNVC: 8
71350-38-31R: RNCC: E | RNVC: 8
023700-HE0375: RNCC: E | RNVC: 8

21 Nov 1982

5975-01-143-4802
Electronic Junction Rack

011434802
2-591613-0: RNCC: 3 | RNVC: 2
5262862: RNCC: 5 | RNVC: 2
MRTB20: RNCC: 5 | RNVC: 9

4 Dec 1982

5975-01-151-9033
Electrical Tie Down Mounting Base

011519033
LPMS-S8-C: RNCC: 3 | RNVC: 2
08458: RNCC: 5 | RNVC: 2
485927-1: RNCC: 5 | RNVC: 9

23 Apr 1983

5975-01-158-3009
Electrical-Electronic Equipment Panel

011583009
12330280: RNCC: 3 | RNVC: 2
12330280: RNCC: 5 | RNVC: 2
12330280: RNCC: 5 | RNVC: 2
BML61442: RNCC: 5 | RNVC: 9

20 Jul 1983

5975-01-159-4244
Fuse Mounting Pan

011594244
803517 PIECE 308: RNCC: 3 | RNVC: 2
871649-A: RNCC: 5 | RNVC: 2
806314 PIECE 308: RNCC: 5 | RNVC: 9

8 Aug 1983

5975-01-160-3729
Electrical Insulation Conduit Sleeve

011603729
B135846-1: RNCC: 3 | RNVC: 2
135846-1: RNCC: 5 | RNVC: 9
135846-1: RNCC: 5 | RNVC: 9

21 Aug 1983

5975-01-176-6873
Electrical Box Connector

011766873
91701178N: RNCC: 3 | RNVC: 2
91701178: RNCC: 3 | RNVC: 9
91701178: RNCC: C | RNVC: 1

15 Apr 1984

5975-01-180-9892
Electrical Box Connector

011809892
E-8353200300: RNCC: 3 | RNVC: 2
83532-003: RNCC: 5 | RNVC: 9

6 Jun 1984

5975-01-182-5766
Electrical Cable Protector

011825766
BACS45A20: RNCC: 3 | RNVC: 2
BACS45A: RNCC: 5 | RNVC: 2
011825766-99307: RNCC: 5 | RNVC: 2

26 Jun 1984

5975-01-186-0114
Conduit Outlet Cover

011860114
K100-A: RNCC: 3 | RNVC: 2

6 Aug 1984

5975-01-188-2785
Blank Panel

011882785
806292PC305: RNCC: 3 | RNVC: 2
N18-T2: RNCC: 5 | RNVC: 2

31 Aug 1984

5975-01-185-0953
Electrical Cable Support

011850953
G134203-1: RNCC: 3 | RNVC: 2
G134203-1: RNCC: 5 | RNVC: 2
G134203-1: RNCC: 5 | RNVC: 9

25 Jul 1984

5975-01-190-3330
Cable Clamp

011903330
135223-1: RNCC: 1 | RNVC: 2
CP-58: RNCC: 3 | RNVC: 2
CP-58: RNCC: 3 | RNVC: 9
135223-1: RNCC: 5 | RNVC: 9

26 Sep 1984

5975-01-160-3682
Blank Panel

011603682
BP66AL: RNCC: 3 | RNVC: 2

21 Aug 1983

5975-01-164-3742
Electrical Conduit Locknut

011643742
LD482-0049-0006: RNCC: 3 | RNVC: 2

15 Oct 1983

5975-01-169-9405
Electrical Components Tie Down Strap

011699405
10-620013: RNCC: 1 | RNVC: 2
PLT2I-M30: RNCC: 3 | RNVC: 2
RT-508-HSBK: RNCC: 3 | RNVC: 2
0538038: RNCC: 5 | RNVC: 2
10-620013: RNCC: C | RNVC: 1
PLT2I-C20: RNCC: E | RNVC: 8

18 Jan 1984

5975-01-173-8785
Blank Panel

011738785
A10P8AL: RNCC: 3 | RNVC: 2

10 Mar 1984

5975-01-173-9588
Junction Box

011739588
A12106CHNFSS: RNCC: 3 | RNVC: 2
AB12105JHFX: RNCC: 3 | RNVC: 2
12106-4XSCHC: RNCC: 5 | RNVC: 2
AB-12105JHFK: RNCC: 5 | RNVC: 9

13 Mar 1984

5975-01-197-5505
Electrical Equipment Mounting Base

011975505
12340167: RNCC: 3 | RNVC: 2
12340167: RNCC: 5 | RNVC: 1
123A0167: RNCC: 5 | RNVC: 9
5588100-R: RNCC: 5 | RNVC: 9
5975PL0833794: RNCC: 6 | RNVC: 9

22 Dec 1984

5975-01-198-9915
Junction Box

011989915
D9289-1: RNCC: 3 | RNVC: 2

17 Jan 1985

5975-01-202-0784
Cover Switch

012020784
6932257-2: RNCC: 3 | RNVC: 2
6932257-2: RNCC: 5 | RNVC: 1

27 Feb 1985

5975-01-203-4388
Stuffing Tube

012034388
CT0741-17: RNCC: 3 | RNVC: 2
P207-0017: RNCC: 3 | RNVC: 2
900-757-0017: RNCC: 3 | RNVC: 2
LE482-0027-0017: RNCC: 7 | RNVC: 2

14 Mar 1985

5975-01-209-6784
Electrical Nonmetallic Conduit Assembly

012096784
R58HB16B33W006: RNCC: 3 | RNVC: 1
R58HB16B33W006: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 9

4 Jun 1985

5975-01-210-5441
Electrical Conduit Adapter

012105441
J15K0008-3: RNCC: 3 | RNVC: 2
J15K0008-3: RNCC: 5 | RNVC: 9

14 Jun 1985

5975-01-227-9867
Electrical Nonmetallic Conduit Assembly

012279867
R58HB33D36X024: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 9

13 Mar 1986

5975-01-226-9601
Electronic Junction Rack

012269601
M81714/5-12: RNCC: 2 | RNVC: 2
MIL-T-81714: RNCC: 4 | RNVC: 1
1-591613-4: RNCC: 5 | RNVC: 1
421501-114: RNCC: 5 | RNVC: 1
MRTB14: RNCC: 5 | RNVC: 9

26 Feb 1986

5975-01-231-1462
Instrument Shelf

012311462
11023407: RNCC: 3 | RNVC: 2

23 Apr 1986

5975-01-231-5026
Electrical Equipment Cabinet

012315026
6959249-1: RNCC: 3 | RNVC: 2
77029-002: RNCC: 3 | RNVC: 2
512400: RNCC: 5 | RNVC: 9

29 Apr 1986

5975-01-231-0282
Electrical Tie Down Mounting Base

012310282
FCM2-S6-14: RNCC: 3 | RNVC: 2
SM-A-988524: RNCC: 7 | RNVC: 2

22 Apr 1986

5975-01-234-7745
Electrical Box Connector

012347745
F361-11327-508: RNCC: 3 | RNVC: 2

19 Jun 1986

5975-01-243-2102
Electrical Components Tie Down Strap

012432102
PLT3I-C0: RNCC: 3 | RNVC: 2
PLT3IC0: RNCC: 5 | RNVC: 1
10001181-5: RNCC: 5 | RNVC: 2
05253534: RNCC: 5 | RNVC: 2
WIT-30VL: RNCC: 5 | RNVC: 9
T40I0C2: RNCC: 5 | RNVC: 9
08930: RNCC: 5 | RNVC: 9
RT511: RNCC: 5 | RNVC: 9

23 Oct 1986

5975-01-243-9958
Blank Panel

012439958
GP500DG1: RNCC: 3 | RNVC: 2
G436-1: RNCC: 5 | RNVC: 9

5 Nov 1986

5975-01-243-9957
Blank Panel

012439957
GP500DG-2: RNCC: 3 | RNVC: 2
G436-2: RNCC: 5 | RNVC: 9
G436-2: RNCC: 5 | RNVC: 9

5 Nov 1986

5975-01-248-4499
Electrical Conduit Adapter

012484499
74A586694-2003: RNCC: 3 | RNVC: 9
74A586694-2003: RNCC: 5 | RNVC: 2

23 Jan 1987

5975-01-249-3409
Stuffing Tube Packing Nut

012493409
M24235/1-019: RNCC: 2 | RNVC: 2
MIL-S-24235: RNCC: 4 | RNVC: 1

10 Feb 1987

5975-01-249-9060
Electrical Box Connector

012499060
370AL: RNCC: 3 | RNVC: 2

20 Feb 1987

5975-01-253-6881
Electrical Equipment Mounting Base

012536881
24895-2/01: RNCC: 3 | RNVC: 2
11461528-3: RNCC: 5 | RNVC: 1
11461528-3: RNCC: 5 | RNVC: 2

23 Apr 1987

5975-01-257-1055
Junction Box

012571055
BI-3-J59: RNCC: 3 | RNVC: 2
GJ800AU1J: RNCC: 5 | RNVC: 9
GJ800AU1J: RNCC: 5 | RNVC: 9
GJ800AU1J: RNCC: C | RNVC: 1

12 Jun 1987

5975-01-174-9374
Junction Box

011749374
A1210NFAL: RNCC: 3 | RNVC: 2

24 Mar 1984

5975-01-214-1358
Flexible Metal Conduit

012141358
SM83-12: RNCC: 3 | RNVC: 2
SM83-12: RNCC: 3 | RNVC: 9
71350-150-31: RNCC: 5 | RNVC: 2
750-084-48: RNCC: 5 | RNVC: 2
MHT-150-31P: RNCC: 5 | RNVC: 2
023700-HP1500: RNCC: 5 | RNVC: 2

6 Aug 1985

5975-01-216-7899
Electrical Nonmetallic Conduit Assembly

012167899
R58HB22B33W010A: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 9

17 Sep 1985

5975-01-220-0506
Fan Mount Rail

012200506
85794400-02: RNCC: 3 | RNVC: 9

7 Nov 1985

5975-01-258-8683
Cable Hanger

012588683
9396141: RNCC: 3 | RNVC: 2

9 Jul 1987

5975-01-259-5938
Cbl Stora Lower Arm

012595938
13222E7056: RNCC: 3 | RNVC: 2

18 Jul 1987

5975-01-262-4806
Circuit Breaker Guard

012624806
918273-1: RNCC: 3 | RNVC: 2

29 Aug 1987

5975-01-262-9978
Electronic Equipment Mounting Tray

012629978
405-10662-501: RNCC: 3 | RNVC: 2

9 Sep 1987

5975-01-261-9696
Electrical Box Connector

012619696
07401032: RNCC: 3 | RNVC: 2
074-01-032: RNCC: 3 | RNVC: 9

20 Aug 1987

5975-01-266-9498
Cable Hanger

012669498
AS23190/1: RNCC: 3 | RNVC: 1
M23190/1-5: RNCC: 3 | RNVC: 2
M23190/1-5: RNCC: 5 | RNVC: 9
M23190/1-5: RNCC: 5 | RNVC: 9
MIL-S-23190/1: RNCC: 5 | RNVC: 9
AS23190/1: RNCC: 5 | RNVC: 9

3 Nov 1987

5975-01-267-2759
Electrical Box Connector

012672759
SHC1021CR: RNCC: 3 | RNVC: 2
SHC-1021-CR: RNCC: 5 | RNVC: 9

8 Nov 1987

5975-01-267-0086
Flexible Metal Conduit Assembly

012670086
11973-0009: RNCC: 3 | RNVC: 2
LE161-0021-0009: RNCC: 7 | RNVC: 2

4 Nov 1987

5975-01-270-4621
Electrical Tie Down Mounting Base

012704621
FCM3-A-L14: RNCC: 3 | RNVC: 2
91615892: RNCC: 5 | RNVC: 2

7 Jan 1988

5975-01-271-3986
Junction Box

012713986
4B69133-128A: RNCC: 3 | RNVC: 2

23 Jan 1988

5975-01-272-0449
Cable Marker Sleeve

012720449
TMS3/4-44: RNCC: 3 | RNVC: 2
TMS-3/4-1.50-9: RNCC: 5 | RNVC: 2
TMS3/4-1.732: RNCC: 5 | RNVC: 9

3 Feb 1988

5975-01-274-0322
Junction Box

012740322
JIC-1: RNCC: 3 | RNVC: 2
5122609-045-105: RNCC: 5 | RNVC: 1

4 Mar 1988

5975-01-275-9792
Electrical Conduit Coupling Nut

012759792
10-90210-120: RNCC: 3 | RNVC: 2

30 Mar 1988

5975-01-071-3491
Flexible Nonmetallic Conduit

010713491
SAE-AS81914/1: RNCC: 3 | RNVC: 1
M81914/1-1009: RNCC: 3 | RNVC: 2
SAE AS81914/1-1009: RNCC: 3 | RNVC: 9
SAE AS81914: RNCC: 5 | RNVC: 1
M81914/1-1009: RNCC: 5 | RNVC: 9
MIL-T-81914: RNCC: 5 | RNVC: 9
SAE AS81914/1-1009: RNCC: 5 | RNVC: 9
SAE AS81914: RNCC: 5 | RNVC: 9

6 Feb 1979

5975-01-075-0583
Electrical Box

010750583
4B69150-105A: RNCC: 3 | RNVC: 2

12 Apr 1979

5975-01-081-3308
Flat Raceway Elbow

010813308
G-4011: RNCC: 3 | RNVC: 2

11 Aug 1979

5975-01-082-7619
Electronic Junction Rack

010827619
HS4778-102: RNCC: 1 | RNVC: 2
CTJ3D02: RNCC: 3 | RNVC: 2
438932-1: RNCC: 3 | RNVC: 2
C8714-12: RNCC: 5 | RNVC: 2
970202-1: RNCC: 5 | RNVC: 2
149925-1: RNCC: 5 | RNVC: 2
CTJ3C03: RNCC: 5 | RNVC: 9
HS4778-102: RNCC: 5 | RNVC: 9
10134304: RNCC: 6 | RNVC: 9
5975PL0929603: RNCC: 6 | RNVC: 9

10 Sep 1979

5975-01-083-5736
Electrical Cable Nipple

010835736
12273176-420: RNCC: 1 | RNVC: 2
222F242-51: RNCC: 3 | RNVC: 2
XM61789-420: RNCC: 5 | RNVC: 2
13238511-4: RNCC: 5 | RNVC: 2

26 Sep 1979

5975-01-084-6114
Junction Box Cover

010846114
Z41-76-COT-BB: RNCC: 3 | RNVC: 2
M129-57: RNCC: 5 | RNVC: 2
M129-57: RNCC: 5 | RNVC: 9
Z41-76-COT-BB: RNCC: 5 | RNVC: 9

23 Oct 1979

5975-01-090-0802
Electrical Box

010900802
4B69120-104A: RNCC: 3 | RNVC: 2

13 Feb 1980

5975-01-090-8876
Electrical Wall Plate

010908876
WPH26: RNCC: 3 | RNVC: 9
30451: RNCC: 5 | RNVC: 9
1591-WP: RNCC: 5 | RNVC: 9

26 Feb 1980

5975-01-095-1346
Cable Clamp

010951346
648R236G02: RNCC: 3 | RNVC: 2
648R236G02: RNCC: 5 | RNVC: 2

23 May 1980

5975-01-096-8149
Stuffing Tube

010968149
G62634-4-C: RNCC: 3 | RNVC: 2
CN-L0009-004: RNCC: 5 | RNVC: 9
380-10441-2: RNCC: D | RNVC: 9

28 Jun 1980

5975-01-102-1538
Electronic Junction Rack

011021538
C8714-9: RNCC: 3 | RNVC: 2
MBBN3423N9D: RNCC: 5 | RNVC: 2
3 OWE 134491 ISSUE2: RNCC: 5 | RNVC: 2
101747-9: RNCC: 5 | RNVC: 2
CTJ-3D-09: RNCC: 5 | RNVC: 9
C8714-9: RNCC: 7 | RNVC: 2

12 Oct 1980

5975-01-102-8758
Cable Check Adapter

011028758
BH22168: RNCC: 3 | RNVC: 2

30 Oct 1980

5975-01-107-1231
Electrical Box Connector

011071231
15233-DC: RNCC: 3 | RNVC: 2
PWA52665-10: RNCC: 5 | RNVC: 9
L104: RNCC: 5 | RNVC: 9
02900: RNCC: 5 | RNVC: 9

30 Jan 1981

5975-01-110-7686
Electrical Components Tie Down Strap

011107686
PLT2I-C0: RNCC: 3 | RNVC: 1
RT-508-0: RNCC: 3 | RNVC: 2
PLT2I-C0: RNCC: 3 | RNVC: 2
02401759: RNCC: 5 | RNVC: 2
AL-08-40-0-C: RNCC: 5 | RNVC: 2
L-8-40-0-C: RNCC: 5 | RNVC: 2
92220509: RNCC: 5 | RNVC: 2
L-8-40-0: RNCC: 5 | RNVC: 9
02401759: RNCC: 5 | RNVC: 9

5 Apr 1981

5975-01-111-1754
Flexible Nonmetallic Conduit

011111754
SAE-AS81914/4: RNCC: 3 | RNVC: 1
M81914/4-1202: RNCC: 3 | RNVC: 2
M81914/4-1202: RNCC: 5 | RNVC: 9
MIL-T-81914: RNCC: 5 | RNVC: 9
10150497: RNCC: 6 | RNVC: 9

12 Apr 1981

5975-01-112-6606
Rigid Metal Conduit Assembly

011126606
4B69142-129A: RNCC: 3 | RNVC: 2
4B69142-129A: RNCC: 5 | RNVC: 2

8 May 1981

5975-01-106-2537
Grounding Stick

011062537
141C163G01: RNCC: 3 | RNVC: 2
141C163G01: RNCC: 3 | RNVC: 9
141C163G01: RNCC: 5 | RNVC: 2

14 Jan 1981

5975-01-113-7397
Panel Mounting Rail

011137397
MX70: RNCC: 3 | RNVC: 2

3 Jun 1981

5975-01-115-2914
Electrical Conduit Ferrule

011152914
10-90229-30: RNCC: 3 | RNVC: 2
10-90229-30: RNCC: 5 | RNVC: 9

1 Jul 1981

5975-01-116-7516
Electrical Equipment Cabinet

011167516
CU879: RNCC: 3 | RNVC: 2
CU879HG: RNCC: 5 | RNVC: 9

2 Aug 1981

5975-01-118-8410
Electronic Junction Rack

011188410
M81714/5-8: RNCC: 2 | RNVC: 2
MIL-T-81714/5: RNCC: 4 | RNVC: 1
TJT701009: RNCC: 5 | RNVC: 1
421501-039: RNCC: 5 | RNVC: 1
MRTB-9: RNCC: 5 | RNVC: 1
3602-025-1108: RNCC: 5 | RNVC: 1
101023-9: RNCC: 5 | RNVC: 9
5975PL0963100: RNCC: 6 | RNVC: 9

12 Sep 1981

5975-01-121-6699
Cable Marker Sleeve

011216699
SS7074-415: RNCC: 3 | RNVC: 2
SS7074-415: RNCC: 5 | RNVC: 2

7 Nov 1981

5975-01-124-8860
Electrical Box Connector

011248860
074-01-027: RNCC: 3 | RNVC: 2
10067331-101: RNCC: 5 | RNVC: 2

15 Jan 1982

5975-01-125-8269
Electrical Conductor Bushing

011258269
74B878001-147: RNCC: 1 | RNVC: 2
CT0905-04C: RNCC: 3 | RNVC: 2
74B878001-147: RNCC: 5 | RNVC: 2
CT0905-147: RNCC: 5 | RNVC: 9
10134281: RNCC: 6 | RNVC: 9

1 Feb 1982

5975-01-127-3343
Electrical Components Tie Down Strap

011273343
7000989-1: RNCC: 3 | RNVC: 2

27 Feb 1982

5975-01-128-0155
Electrical Cable Nipple

011280155
40N171-5S: RNCC: 3 | RNVC: 9
40N171-5S: RNCC: C | RNVC: 1

11 Mar 1982

5975-01-130-8496
Electrical-Electronic Equipment Chassis

011308496
641-4263-004: RNCC: 3 | RNVC: 2

29 Apr 1982

5975-01-134-5302
Convolute Reinforcement

011345302
CRN1137-9: RNCC: 3 | RNVC: 2
ST5M1570-009: RNCC: 5 | RNVC: 2

5 Jul 1982

5975-01-141-1535
Guy Clamp

011411535
J930: RNCC: 3 | RNVC: 2

24 Oct 1982

5975-01-143-1269
Junction Box Assembly

011431269
287508: RNCC: 3 | RNVC: 2

27 Nov 1982

5975-01-143-4800
Rigid Metal Conduit

011434800
0550010000: RNCC: 3 | RNVC: 2
7126K1: RNCC: 5 | RNVC: 2

4 Dec 1982

5975-01-152-1951
Electrical Box Connector

011521951
3307: RNCC: 3 | RNVC: 2
909: RNCC: 5 | RNVC: 9
43783: RNCC: E | RNVC: 8
127-0312-005: RNCC: E | RNVC: 8
02904: RNCC: E | RNVC: 8
676: RNCC: E | RNVC: 8

28 Apr 1983

5975-01-152-2635
Junction Box Cover

011522635
2225890: RNCC: 3 | RNVC: 2
2BD721: RNCC: 5 | RNVC: 9
2225890: RNCC: 5 | RNVC: 9
45B008-P2: RNCC: 5 | RNVC: 9

29 Apr 1983

5975-01-159-4131
Blank Panel

011594131
872480-T1: RNCC: 3 | RNVC: 2
803517 PIECE 305: RNCC: 5 | RNVC: 9

8 Aug 1983

5975-01-159-6137
Electrical Conduit Bushing

011596137
BU400I: RNCC: 3 | RNVC: 2
1231: RNCC: 5 | RNVC: 2
IBC-400: RNCC: 5 | RNVC: 9

11 Aug 1983

5975-01-184-5831
Conduit Outlet

011845831
LB-75-M: RNCC: 3 | RNVC: 2
LB-75: RNCC: 5 | RNVC: 9
LB75-M: RNCC: 5 | RNVC: 9
LB28F0RM8: RNCC: E | RNVC: 8

20 Jul 1984

5975-01-184-5833
Conduit Outlet

011845833
LB125-M: RNCC: 3 | RNVC: 2
LB125-M: RNCC: 5 | RNVC: 9

20 Jul 1984

5975-01-188-7880
Electrical-Electronic Equipment Chassis

011887880
12325430: RNCC: 3 | RNVC: 2

7 Sep 1984

5975-01-189-6874
Conduit Outlet Cover

011896874
K100: RNCC: 3 | RNVC: 2
K100: RNCC: 5 | RNVC: 9

19 Sep 1984

5975-01-190-4816
Guide Rail

011904816
7681-56030-706: RNCC: 1 | RNVC: 2
CTJ120E01B-513: RNCC: 3 | RNVC: 2
7681-56030-706: RNCC: 5 | RNVC: 9
CTJ120E01B-6162: RNCC: C | RNVC: 1

27 Sep 1984

5975-01-191-1693
Electrical Components Tie Down Strap

011911693
320-4-45549-101: RNCC: 3 | RNVC: 2
5975PL1789141: RNCC: 6 | RNVC: 9

6 Oct 1984

5975-01-192-8694
Junction Box

011928694
A404CHNF: RNCC: 3 | RNVC: 2
AB-443JFN: RNCC: 5 | RNVC: 2

26 Oct 1984

5975-01-163-5976
Blank Panel

011635976
824990-T1: RNCC: 3 | RNVC: 2

5 Oct 1983

5975-01-164-3739
Electrical Conduit Locknut

011643739
LD482-0049-0001: RNCC: 3 | RNVC: 2

15 Oct 1983

5975-01-164-9437
Electrical Conduit Locknut

011649437
SL1: RNCC: 3 | RNVC: 9
SL1: RNCC: 5 | RNVC: 2
924J626 ITEM 13: RNCC: 5 | RNVC: 9
64-2494-0001: RNCC: C | RNVC: 1

22 Oct 1983

5975-01-171-7048
Junction Box

011717048
A12106CHAL: RNCC: 3 | RNVC: 2
AB12106: RNCC: 5 | RNVC: 9
E1206: RNCC: 5 | RNVC: 9

11 Feb 1984

5975-01-173-8786
Blank Panel

011738786
A16P14AL: RNCC: 3 | RNVC: 2

10 Mar 1984

5975-01-173-9577
Blank Panel

011739577
A14P12AL: RNCC: 3 | RNVC: 2

13 Mar 1984

5975-01-174-7291
Electrical Cable Nipple

011747291
205402-3: RNCC: 3 | RNVC: 2
5M2117-003: RNCC: 5 | RNVC: 9
10134283: RNCC: 6 | RNVC: 9

22 Mar 1984

5975-01-175-0932
Blank Panel

011750932
806314 PIECE 311: RNCC: 3 | RNVC: 2
N110-A: RNCC: 5 | RNVC: 9

27 Mar 1984

5975-01-176-1392
Electrical Conduit Bend

011761392
12275345: RNCC: 3 | RNVC: 2

8 Apr 1984

5975-01-198-5615
Junction Box

011985615
A606CHNFSS: RNCC: 3 | RNVC: 2
AB-664JHFX: RNCC: 3 | RNVC: 2
A606CHNFFSS: RNCC: 5 | RNVC: 9
E-606CHNFSS: RNCC: 5 | RNVC: 9

10 Jan 1985

NSN 5975-01-209-5753 012095753 FLOOR RUNNER,STATIC

5975-01-209-5753
Static Floor Runner

012095753
5046-400-40FT.PUTTY: RNCC: 3 | RNVC: 2
SM0440-BR: RNCC: 5 | RNVC: 9
8200: RNCC: 5 | RNVC: 9
WS 7553-G: RNCC: 5 | RNVC: 9
8200: RNCC: 5 | RNVC: 9
8291: RNCC: 5 | RNVC: 9
8200,4X40FT.,GOLD: RNCC: 5 | RNVC: 9
8291: RNCC: 5 | RNVC: 9
8291: RNCC: C | RNVC: 1

1 Jun 1985

5975-01-210-5079
Electric Ground Plate

012105079
L5416065-003: RNCC: 3 | RNVC: 2
L5416065-003: RNCC: 5 | RNVC: 2

13 Jun 1985

5975-01-224-0207
Support

012240207
618-4443-001: RNCC: 3 | RNVC: 2

11 Jan 1986

5975-01-224-8225
Electrical Nonmetallic Conduit Assembly

012248225
6006T58P02: RNCC: 1 | RNVC: 2
600326: RNCC: 3 | RNVC: 9
6006T58P02: RNCC: 5 | RNVC: 1
6006T58P02: RNCC: 5 | RNVC: 2

23 Jan 1986

5975-01-226-9612
Junction Box

012269612
A-1614CH: RNCC: 3 | RNVC: 2
PB HC 16X14X6 JIC: RNCC: 5 | RNVC: 2
AB-16146JH: RNCC: 5 | RNVC: 2
E-1614CH: RNCC: 5 | RNVC: 9

26 Feb 1986

5975-01-229-1714
Electrical Conduit Adapter

012291714
E943J: RNCC: 3 | RNVC: 9
E943J: RNCC: 5 | RNVC: 2
E943J: RNCC: 5 | RNVC: 2
00034481062066: RNCC: 5 | RNVC: 9

27 Mar 1986

5975-01-231-7745
Electrical Components Tie Down Strap

012317745
RTE2100UV: RNCC: 3 | RNVC: 2
PLT5EH-C0: RNCC: 3 | RNVC: 2

3 May 1986

5975-01-232-1007
Junction Box

012321007
2-198-1-00119: RNCC: 3 | RNVC: 2
2CD568: RNCC: 5 | RNVC: 2
2CD568: RNCC: 5 | RNVC: 9

8 May 1986

5975-01-234-8001
Electrical Components Tie Down Strap

012348001
1062: RNCC: 3 | RNVC: 9
1062: RNCC: 5 | RNVC: 2

19 Jun 1986

5975-01-239-9867
Conduit Outlet

012399867
5335-0: RNCC: 3 | RNVC: 2
30239: RNCC: 5 | RNVC: 2
B242L: RNCC: 5 | RNVC: 9
5335: RNCC: 5 | RNVC: 9
276-4L: RNCC: 5 | RNVC: 9

7 Sep 1986

5975-01-248-6223
Electrical Conductor Bushing

012486223
2086(BLACK)SB-687-9: RNCC: 3 | RNVC: 2
1409720: RNCC: 5 | RNVC: 2
1409720: RNCC: 7 | RNVC: 9

28 Jan 1987

5975-01-248-7077
Flexible Nonmetallic Conduit

012487077
PAC M1889004: RNCC: 3 | RNVC: 2
48-2217-050: RNCC: 5 | RNVC: 9
68237-R: RNCC: 5 | RNVC: 9

30 Jan 1987

5975-01-246-5308
Electrical Conduit Coupling Nut

012465308
BACN10WW10A1: RNCC: 3 | RNVC: 2
180042-FJ0100: RNCC: 5 | RNVC: 2
BACN10WW10A: RNCC: 5 | RNVC: 9

14 Dec 1986

5975-01-249-7234
Stuffing Tube

012497234
M24235/13-004: RNCC: 2 | RNVC: 2
MIL-S-24235: RNCC: 4 | RNVC: 1

15 Feb 1987

5975-01-250-1765
Junction Box

012501765
FD-1-50: RNCC: 3 | RNVC: 2

26 Feb 1987

5975-01-251-1486
Electrical Components Tie Down Strap

012511486
PLT1M-C0: RNCC: 3 | RNVC: 2

13 Mar 1987

5975-01-252-3250
Junction Box

012523250
081-076-01: RNCC: 3 | RNVC: 2
081-076-00: RNCC: 5 | RNVC: 9

1 Apr 1987

5975-01-250-4764
Stuffing Tube

012504764
M24235/13-012: RNCC: 2 | RNVC: 2
MIL-S-24235: RNCC: 4 | RNVC: 1

2 Mar 1987

5975-01-232-3615
Electrical Components Tie Down Strap

012323615
11450911-9: RNCC: 3 | RNVC: 2
11450911-9: RNCC: 5 | RNVC: 1
11450911-9: RNCC: 5 | RNVC: 1

12 May 1986

5975-01-254-1636
Electrical Nonmetallic Conduit Assembly

012541636
R58HB06F36W024D: RNCC: 3 | RNVC: 2
R58HB06F36W024D: RNCC: 5 | RNVC: 9

2 May 1987

5975-01-254-7891
Stuffing Tube

012547891
CT01485: RNCC: 3 | RNVC: 2
LE482-0079-0001: RNCC: 5 | RNVC: 2

10 May 1987

5975-01-257-1056
Junction Box

012571056
BI-3-L59: RNCC: 3 | RNVC: 2
GJ800AU1L: RNCC: 5 | RNVC: 2

12 Jun 1987

5975-01-210-8091
Electrical Nonmetallic Conduit Assembly

012108091
R58HB16D33W006D: RNCC: 3 | RNVC: 1
R58HB16D33W006D: RNCC: 5 | RNVC: 9
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

18 Jun 1985

5975-01-210-8101
Electrical Nonmetallic Conduit Assembly

012108101
R58HB16F36W006D: RNCC: 3 | RNVC: 1
R58HB16F36W006D: RNCC: 5 | RNVC: 9
R58HB: RNCC: D | RNVC: 9

18 Jun 1985

5975-01-210-8112
Electrical Nonmetallic Conduit Assembly

012108112
R58HB16K16Y096F: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 9

18 Jun 1985

5975-01-212-5767
Junction Box

012125767
A1614CHAL: RNCC: 3 | RNVC: 2
AB-16146JHA: RNCC: 5 | RNVC: 2

14 Jul 1985

5975-01-214-1356
Flexible Metal Conduit

012141356
023700-HP0750: RNCC: 3 | RNVC: 2
SM83-06: RNCC: 5 | RNVC: 9
750-084-24: RNCC: 5 | RNVC: 9
SM83-06C: RNCC: 5 | RNVC: 9
71350-75-31: RNCC: 5 | RNVC: 9

6 Aug 1985

5975-01-214-1357
Flexible Metal Conduit

012141357
750-084-32: RNCC: 3 | RNVC: 2
71350-100-31: RNCC: 5 | RNVC: 2
SM83-08: RNCC: 5 | RNVC: 2
023700-HP1000: RNCC: 5 | RNVC: 2
SM83-08: RNCC: 5 | RNVC: 9
023700-HE1000: RNCC: 5 | RNVC: 9

6 Aug 1985

5975-01-256-9020
Electrical Box Connector

012569020
AA50553-1-1-X-2-02-S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
W-F-408: RNCC: 5 | RNVC: 9
ST-2: RNCC: E | RNVC: 8
11176200: RNCC: E | RNVC: 8
11176200-1: RNCC: E | RNVC: 8

9 Jun 1987

5975-01-258-6231
Electrical Nonmetallic Conduit Assembly

012586231
K58H0005-1: RNCC: 3 | RNVC: 2
K58H0005-1: RNCC: 5 | RNVC: 2
K58H0005-1: RNCC: 5 | RNVC: 9

5 Jul 1987

5975-01-220-5996
Rod Assembly

012205996
4900-5131: RNCC: 3 | RNVC: 2
B889100131: RNCC: 5 | RNVC: 9
175B618002-131: RNCC: 7 | RNVC: 2

16 Nov 1985

5975-01-262-5788
Electrical Tie Down Mounting Base

012625788
ASMS-A-X: RNCC: 3 | RNVC: 2
ASMS-A: RNCC: 5 | RNVC: 1

31 Aug 1987

5975-01-264-6639
Cable Hanger

012646639
CL-1-C-5.00: RNCC: 3 | RNVC: 2

5 Oct 1987

5975-01-263-8407
Cable Marker Sleeve

012638407
10054747-804: RNCC: 3 | RNVC: 9

20 Sep 1987

5975-01-264-6754
Electrical Components Tie Down Strap

012646754
SSC4H-S25: RNCC: 3 | RNVC: 2
84-14037: RNCC: 7 | RNVC: 2

5 Oct 1987

5975-01-268-1529
Electrical Cable Nipple

012681529
202D153-25: RNCC: 3 | RNVC: 2

23 Nov 1987

5975-01-269-4356
Electrical Conduit Adapter

012694356
2604-112 TY9: RNCC: 3 | RNVC: 1

16 Dec 1987

5975-01-269-4932
Electrical Equipment Mounting Base

012694932
297-44: RNCC: 3 | RNVC: 2

17 Dec 1987

5975-01-223-6020
Electrical Conduit Adapter

012236020
7000-718-125K000: RNCC: 3 | RNVC: 2
RP2100 SERIES STEEL1.250: RNCC: 5 | RNVC: 1
RP2100-F10-S: RNCC: 5 | RNVC: 1
RP2100-EM10-S: RNCC: 5 | RNVC: 2
S82100-8M10-S: RNCC: 5 | RNVC: 2
200701-FE5110: RNCC: 5 | RNVC: 2
S82100-EM10-S: RNCC: 5 | RNVC: 9
RP2100-G10-S: RNCC: 5 | RNVC: 9

3 Jan 1986

5975-01-272-3692
Blank Panel

012723692
13250584: RNCC: 3 | RNVC: 2
13250584: RNCC: 5 | RNVC: 1

8 Feb 1988

5975-01-272-8488
Stuffing Tube

012728488
M19622/1-002: RNCC: 3 | RNVC: 2
MIL-S-19622/1: RNCC: 4 | RNVC: 1
2334C: RNCC: 5 | RNVC: 2
1976159 ITEM 11: RNCC: 5 | RNVC: 9
M19622/1-002: RNCC: C | RNVC: 1

16 Feb 1988

5975-01-275-6145
Electrical Conduit Adapter

012756145
CC1046-1: RNCC: 3 | RNVC: 2
7000-430-16-D2: RNCC: 3 | RNVC: 2
3255220-1: RNCC: 5 | RNVC: 9
3255220-1: RNCC: 7 | RNVC: 2

23 Mar 1988

5975-01-276-5220
Electrical Cable Protector

012765220
12354872: RNCC: 3 | RNVC: 2

9 Apr 1988

5975-01-277-7854
Electrical Equipment Mounting Base

012777854
A3046238: RNCC: 3 | RNVC: 2

27 Apr 1988

5975-01-280-0399
Electrical Box Connector

012800399
040-2535: RNCC: 3 | RNVC: 2
505419: RNCC: 5 | RNVC: 9
505419-55: RNCC: 5 | RNVC: 9

29 May 1988

5975-01-280-3323
Conduit Outlet

012803323
LB125-A: RNCC: 3 | RNVC: 2
T12617957 PC40: RNCC: 5 | RNVC: 9
T12617957 PC40: RNCC: C | RNVC: 1

8 Jun 1988

5975-01-281-1181
Electrical Cable Nipple

012811181
317-1397-000: RNCC: 3 | RNVC: 2
7-172-000020: RNCC: 5 | RNVC: 1
10652267-002: RNCC: 5 | RNVC: 2
317-1397-000: RNCC: 5 | RNVC: 9

17 Jun 1988

5975-01-281-6016
Junction Box

012816016
A1614NFSS: RNCC: 3 | RNVC: 2
E-1614NFSS: RNCC: 5 | RNVC: 9
1614NFSS: RNCC: C | RNVC: 1

28 Jun 1988

5975-01-214-4577
Electrical Box Connector

012144577
3231: RNCC: 3 | RNVC: 2

12 Aug 1985

5975-01-219-5735
Cable Hanger

012195735
441366-3: RNCC: 3 | RNVC: 2
441366-3: RNCC: 3 | RNVC: 9
441366-3: RNCC: 5 | RNVC: 2

29 Oct 1985

5975-01-260-7962
Electrical Conduit Adapter

012607962
S2182F1237-1-12C: RNCC: 3 | RNVC: 2
GA801HL15F12CA: RNCC: 7 | RNVC: 2

5 Aug 1987

5975-01-060-0535
Cable Clamp

010600535
1811652-6: RNCC: 3 | RNVC: 2
021-1000: RNCC: 3 | RNVC: 9
1063108-7: RNCC: 5 | RNVC: 2
1063108-7: RNCC: 5 | RNVC: 2
1063108-7: RNCC: 5 | RNVC: 9
1811652-6 03956: RNCC: 7 | RNVC: 2

6 May 1978

5975-01-075-0568
Electrical Box

010750568
4B69121-115A: RNCC: 3 | RNVC: 2

12 Apr 1979

5975-01-075-0575
Electrical Box

010750575
4B69131-116A: RNCC: 3 | RNVC: 2

12 Apr 1979

5975-01-079-2962
Electrical Conduit Coupling Nut

010792962
12278962: RNCC: 3 | RNVC: 2

1 Jul 1979

5975-01-079-9068
Junction Box

010799068
Z147-212A-96: RNCC: 3 | RNVC: 2
619081-3: RNCC: 5 | RNVC: 1
619707-3: RNCC: 5 | RNVC: 9
Z147-212A: RNCC: 5 | RNVC: 9
Z147-212A-96: RNCC: 5 | RNVC: 9

16 Jul 1979

5975-01-082-6669
Electronic Junction Rack

010826669
HS4778-110: RNCC: 1 | RNVC: 2
CTJ-3D-10-4021: RNCC: 3 | RNVC: 2
953904-1: RNCC: 5 | RNVC: 2
953904-1: RNCC: 5 | RNVC: 2
HS4778-110: RNCC: 5 | RNVC: 9
953904-1: RNCC: 5 | RNVC: 9
CTJ-3B-10: RNCC: 5 | RNVC: 9
CTJ-3D-10: RNCC: 5 | RNVC: 9
XM61955-9: RNCC: 5 | RNVC: 9

7 Sep 1979

5975-01-082-7629
Junction Box

010827629
A606CH: RNCC: 3 | RNVC: 2
AB-664JH: RNCC: 3 | RNVC: 2
E-606CH: RNCC: 5 | RNVC: 9
A606CH: RNCC: C | RNVC: 1

10 Sep 1979

5975-01-084-0987
Electrical Wall Plate

010840987
WLRS-1: RNCC: 3 | RNVC: 2
FSK-WR-1: RNCC: 5 | RNVC: 2

9 Oct 1979

5975-01-088-5998
Electrical Conduit Elbow

010885998
10359757: RNCC: 3 | RNVC: 2

16 Jan 1980

5975-01-088-0484
Electrical Components Tie Down Strap

010880484
53064-3: RNCC: 3 | RNVC: 2

4 Jan 1980

5975-01-090-1062
Electronic Junction Rack

010901062
M81714/16-2: RNCC: 2 | RNVC: 2
MIL-T-81714: RNCC: 4 | RNVC: 1
591621-3: RNCC: 5 | RNVC: 1
421501-043: RNCC: 5 | RNVC: 1
TJT703003: RNCC: 5 | RNVC: 2
MRTBL-3: RNCC: 5 | RNVC: 9
TMH-101033-3: RNCC: 5 | RNVC: 9

13 Feb 1980

5975-01-091-9080
Electrical Cable Nipple

010919080
12273164-410: RNCC: 1 | RNVC: 2
202E346-51: RNCC: 3 | RNVC: 2
313E457-9: RNCC: 5 | RNVC: 2
313E457-9: RNCC: 5 | RNVC: 9
313E457-9: RNCC: 5 | RNVC: 9

15 Mar 1980

5975-01-093-0341
Electronic Junction Rack

010930341
M81714/5-6: RNCC: 2 | RNVC: 2
MIL-T-81714: RNCC: 4 | RNVC: 1
421-501-03-7: RNCC: 5 | RNVC: 1
538120-6: RNCC: 5 | RNVC: 1
591613-7: RNCC: 5 | RNVC: 1
421501-037: RNCC: 5 | RNVC: 1
3602-025-1106: RNCC: 5 | RNVC: 1
TJT701007: RNCC: 5 | RNVC: 2
MRTB-7: RNCC: 5 | RNVC: 9
101023-7: RNCC: 5 | RNVC: 9

9 Apr 1980

5975-01-094-4698
Electrical Cable Nipple

010944698
12273147-120: RNCC: 1 | RNVC: 2
770-020S602: RNCC: 3 | RNVC: 2
202F211-51: RNCC: 5 | RNVC: 2
313F322-9: RNCC: 5 | RNVC: 2
10652587-1: RNCC: 5 | RNVC: 9
202F211-51: RNCC: 5 | RNVC: 9
313F322-9: RNCC: 5 | RNVC: 9
313F322-9: RNCC: 5 | RNVC: 9
13238510-1: RNCC: 5 | RNVC: 9
202F211-51-0: RNCC: 5 | RNVC: 9

10 May 1980

5975-01-095-3382
Electronic Junction Rack

010953382
M81714/5-3: RNCC: 2 | RNVC: 2
3602-025-1103: RNCC: 5 | RNVC: 1
AS81714: RNCC: 5 | RNVC: 1
421501-034: RNCC: 5 | RNVC: 1
591613-4: RNCC: 5 | RNVC: 1
TJT701004: RNCC: 5 | RNVC: 2
MRTB-4: RNCC: 5 | RNVC: 9
AS81714: RNCC: 5 | RNVC: 9
101023-4: RNCC: 5 | RNVC: 9
MIL-T-81714: RNCC: 5 | RNVC: 9

29 May 1980

5975-01-098-6307
Electronic Junction Rack

010986307
M81714/5-5: RNCC: 3 | RNVC: 2
M81714/5-5: RNCC: 3 | RNVC: 9
AS81714: RNCC: 5 | RNVC: 1
TJT701006: RNCC: 5 | RNVC: 2
M81714/5-5: RNCC: 5 | RNVC: 9
AS81714: RNCC: 5 | RNVC: 9
MIL-T-81714: RNCC: 5 | RNVC: 9

6 Aug 1980

5975-01-099-0982
Conduit Outlet

010990982
JBDX-75L: RNCC: 3 | RNVC: 2

13 Aug 1980

5975-01-099-1040
Interior Cable Rack

010991040
0020040630: RNCC: 3 | RNVC: 2
2004-6: RNCC: 3 | RNVC: 9
9002-232: RNCC: 5 | RNVC: 9

13 Aug 1980

5975-01-101-4160
Electrical Components Tie Down Strap

011014160
12282776: RNCC: 3 | RNVC: 2
TYZ28M: RNCC: 5 | RNVC: 1
RT1400-Z: RNCC: 5 | RNVC: 1
PLT4S-C76: RNCC: 5 | RNVC: 1
PLT4S-C76: RNCC: 5 | RNVC: 2
PLT4S-M76: RNCC: 5 | RNVC: 9
TYZ28M: RNCC: 5 | RNVC: 9
PLT4S-76: RNCC: 5 | RNVC: 9
TYZ28M: RNCC: C | RNVC: 1

29 Sep 1980

5975-01-107-0379
Cable Hanger

011070379
5166026: RNCC: 3 | RNVC: 2

30 Jan 1981

5975-01-108-9000
Electrical Tie Down Mounting Base

011089000
TC342: RNCC: 3 | RNVC: 2
582R688H03: RNCC: 7 | RNVC: 2
582R688H03: RNCC: 7 | RNVC: 9

7 Mar 1981

5975-01-110-7673
Underground Cable Rack Hook

011107673
C203-1132: RNCC: 3 | RNVC: 2
C203-1132: RNCC: 5 | RNVC: 9
ADU00004S002: RNCC: 5 | RNVC: 9
DU4S2: RNCC: 5 | RNVC: 9
J5132AP(T): RNCC: 5 | RNVC: 9

5 Apr 1981

5975-01-111-4773
Ground Strap Spring

011114773
3365616-1: RNCC: 3 | RNVC: 2
3365616-1: RNCC: 3 | RNVC: 2
3365616-1: RNCC: 5 | RNVC: 2
5975PL0802148: RNCC: 6 | RNVC: 9

17 Apr 1981

5975-01-112-6608
Rigid Metal Conduit Assembly

011126608
4B69142-133A: RNCC: 3 | RNVC: 2

8 May 1981

5975-01-108-5211
Electrical Cable Nipple

011085211
8338561-2: RNCC: 3 | RNVC: 2
10087271: RNCC: 6 | RNVC: 9

1 Mar 1981

5975-01-113-1688
Rigid Metal Conduit Assembly

011131688
251600: RNCC: 3 | RNVC: 2
4B69142-105A: RNCC: 3 | RNVC: 2
4B69142-105A: RNCC: 5 | RNVC: 2

17 May 1981

5975-01-115-3876
Cable Hanger Support Bracket

011153876
371008: RNCC: 3 | RNVC: 2
371008: RNCC: 5 | RNVC: 9

4 Jul 1981

5975-01-117-4267
Stuffing Tube

011174267
M19622/1-002: RNCC: 3 | RNVC: 2
MIL-S-19622: RNCC: 4 | RNVC: 1
617089-24: RNCC: 5 | RNVC: 1
M19622/1-002: RNCC: 5 | RNVC: 1
5193747: RNCC: D | RNVC: 9

14 Aug 1981

5975-01-118-7877
Junction Box Assembly

011187877
70550-02058-042: RNCC: 3 | RNVC: 2

11 Sep 1981

5975-01-124-5053
Electrical Conduit Coupling

011245053
8764985-5: RNCC: 3 | RNVC: 2

6 Jan 1982

5975-01-130-2544
Rigid Metal Conduit

011302544
65610-02050-102: RNCC: 3 | RNVC: 2

19 Apr 1982

5975-01-121-6701
Cable Marker Sleeve

011216701
SS7074-412: RNCC: 3 | RNVC: 2

7 Nov 1981

5975-01-123-4209
Electrical-Electronic Equipment Chassis

011234209
65011-006: RNCC: 3 | RNVC: 2

11 Dec 1981

5975-01-142-2681
Relay Box Assembly

011422681
70550-02152-041: RNCC: 3 | RNVC: 2

14 Nov 1982

5975-01-149-2006
Blank Panel

011492006
74A802613-1003: RNCC: 3 | RNVC: 2
74A802613-1001: RNCC: E | RNVC: 8

16 Mar 1983

5975-01-147-7879
Blank Panel

011477879
74A802614-1006: RNCC: 3 | RNVC: 2
10154465: RNCC: 6 | RNVC: 9
74A802614-1006: RNCC: C | RNVC: 1

23 Feb 1983

5975-01-144-8023
Electrical Tie Down Mounting Base

011448023
12272341: RNCC: 1 | RNVC: 2
ABMM-A: RNCC: 3 | RNVC: 2
150-0786-020: RNCC: 3 | RNVC: 2
12H4782: RNCC: 5 | RNVC: 2
GP830AN1: RNCC: 5 | RNVC: 2
5L.3892.001.25: RNCC: 5 | RNVC: 2
5L.3892.001.25: RNCC: 5 | RNVC: 2
GP830AN1: RNCC: 5 | RNVC: 9
12303133: RNCC: 5 | RNVC: 9

30 Dec 1982

5975-01-158-4635
Junction Box

011584635
2249450: RNCC: 3 | RNVC: 2
2AN858: RNCC: 5 | RNVC: 2
2249450: RNCC: 5 | RNVC: 9
2AN858: RNCC: 5 | RNVC: 9
45B007: RNCC: 5 | RNVC: 9

23 Jul 1983

5975-01-176-5619
Junction Box

011765619
J-606W: RNCC: 3 | RNVC: 2

13 Apr 1984

5975-01-176-6874
Electrical Box Connector

011766874
91701226N: RNCC: 3 | RNVC: 2
91701226N: RNCC: 3 | RNVC: 9
91701226N: RNCC: 5 | RNVC: 2

15 Apr 1984

5975-01-176-6875
Electrical Box Connector

011766875
91701227N: RNCC: 3 | RNVC: 9
91701227N: RNCC: C | RNVC: 1

15 Apr 1984

5975-01-175-2810
Cable Strain Relief Bushing

011752810
1464: RNCC: 3 | RNVC: 2
SR-24-1: RNCC: 5 | RNVC: 2

29 Mar 1984

5975-01-181-9068
Electrical Tie Down Mounting Base

011819068
12279482: RNCC: 3 | RNVC: 2

17 Jun 1984

5975-01-182-7484
Electrical Cable Protector

011827484
387-3320: RNCC: 3 | RNVC: 2
387-3320: RNCC: 3 | RNVC: 9
387-3320: RNCC: 5 | RNVC: 2
387-3320: RNCC: 5 | RNVC: 9
387-3320: RNCC: D | RNVC: 9

27 Jun 1984

5975-01-184-5832
Conduit Outlet

011845832
LB100-M: RNCC: 3 | RNVC: 2
LB100-M: RNCC: 5 | RNVC: 9

20 Jul 1984

5975-01-189-4659
Cable Hanger

011894659
12337487: RNCC: 3 | RNVC: 2

15 Sep 1984

5975-01-193-4772
Electrical Tie Down Mounting Base

011934772
HS4271-3S10: RNCC: 1 | RNVC: 2
TM3S10: RNCC: 3 | RNVC: 2
10273507: RNCC: 3 | RNVC: 2
HS4271-3S10: RNCC: 5 | RNVC: 9

4 Nov 1984

5975-01-160-8064
Junction Box

011608064
10500832: RNCC: 3 | RNVC: 2

27 Aug 1983

5975-01-164-4447
Electrical-Electronic Equipment Chassis

011644447
441-1079-01: RNCC: 3 | RNVC: 2

17 Oct 1983

5975-01-166-1786
Electrical Box Connector

011661786
SHC-1020: RNCC: 3 | RNVC: 2
SCH-1014: RNCC: 5 | RNVC: 9
SHC-1014: RNCC: 5 | RNVC: 9
SHC-1020: RNCC: 5 | RNVC: 9
7681-56032-001: RNCC: 5 | RNVC: 9
7681-56032-001: RNCC: C | RNVC: 1

8 Nov 1983

5975-01-166-6538
Electrical Conduit Tee

011666538
21103: RNCC: 3 | RNVC: 2

16 Nov 1983

5975-01-169-1412
Stuffing Tube

011691412
F-47025: RNCC: 3 | RNVC: 2

4 Jan 1984

5975-01-169-3580
Electrical Equipment Mounting Base

011693580
16F4655-9: RNCC: 3 | RNVC: 2

6 Jan 1984

5975-01-195-6610
Electrical Conduit Elbow

011956610
12311080-17: RNCC: 3 | RNVC: 2

1 Dec 1984

5975-01-197-7673
Electrical Grounding Plate

011977673
48794-B14: RNCC: 3 | RNVC: 2
48794B14: RNCC: C | RNVC: 1

27 Dec 1984

5975-01-198-8794
Electrical Grounding Plate

011988794
12275248: RNCC: 3 | RNVC: 2

15 Jan 1985

5975-01-199-3184
Electrical Conduit Bushing

011993184
536R559H01: RNCC: 3 | RNVC: 2

20 Jan 1985

5975-01-203-2080
Electrical Nonmetallic Conduit Assembly

012032080
251613: RNCC: 3 | RNVC: 2

12 Mar 1985

5975-01-202-2692
Electrical Conductor Bushing

012022692
L5415944-001: RNCC: 3 | RNVC: 2

28 Feb 1985

5975-01-208-2714
Motor Box

012082714
36A287255-G01: RNCC: 3 | RNVC: 2

11 May 1985

5975-01-207-7195
Strain Electrical Conductor Clamp

012077195
4P23293-101A: RNCC: 3 | RNVC: 2

4 May 1985

5975-01-208-7644
Cable Hanger

012087644
M23190/1-2: RNCC: 3 | RNVC: 2
M23190/1-2: RNCC: 3 | RNVC: 9
AS23190/1: RNCC: 5 | RNVC: 1
MIL-S-23190/1: RNCC: 5 | RNVC: 9
AS23190/1: RNCC: 5 | RNVC: 9
M23190/1-2: RNCC: 5 | RNVC: 9

19 May 1985

5975-01-210-2179
Electrical Box Connector

012102179
L6410327-009: RNCC: 3 | RNVC: 2

8 Jun 1985

5975-01-223-6023
Electrical Box Connector

012236023
CES-3: RNCC: 3 | RNVC: 2
CES-3: RNCC: 5 | RNVC: 9

3 Jan 1986

5975-01-223-5387
Junction Box Assembly

012235387
4G14049-103C: RNCC: 3 | RNVC: 2

31 Dec 1985

5975-01-224-7209
Rigid Metal Conduit Assembly

012247209
5904030-3: RNCC: 1 | RNVC: 2
5904030-3: RNCC: 3 | RNVC: 2
210568-DI0150: RNCC: 3 | RNVC: 2
5904030-3: RNCC: 5 | RNVC: 9

22 Jan 1986

5975-01-225-3958
Rigid Metal Conduit

012253958
5-4-5148-1: RNCC: 3 | RNVC: 2

2 Feb 1986

5975-01-228-1686
Electrical Box Connector

012281686
M1274: RNCC: 3 | RNVC: 2
M1274: RNCC: 5 | RNVC: 9

15 Mar 1986

5975-01-226-6531
Electrical Tie Down Mounting Base

012266531
ABM2S-AT-0: RNCC: 3 | RNVC: 2
ABM2S-AT-0: RNCC: 5 | RNVC: 2
7791553: RNCC: 5 | RNVC: 2
ABM-4-NBK: RNCC: 5 | RNVC: 2
AMB-4BLK: RNCC: 5 | RNVC: 9
10134305: RNCC: 6 | RNVC: 9

20 Feb 1986

5975-01-226-9709
Flat Elbow

012269709
EG2111: RNCC: 3 | RNVC: 2
G2111: RNCC: 5 | RNVC: 9

26 Feb 1986

5975-01-236-9174
Electrical Box Connector

012369174
ZA-5: RNCC: 3 | RNVC: 1
CG-6250: RNCC: 3 | RNVC: 2
RSR-1212: RNCC: 3 | RNVC: 2
0099-3-4058-3: RNCC: 5 | RNVC: 9
0099-3-4058: RNCC: 5 | RNVC: 9
82A5048A1127: RNCC: 7 | RNVC: 1

24 Jul 1986

5975-01-237-7880
Electrical Equipment Leg

012377880
1421-0000-500: RNCC: 3 | RNVC: 2
11217: RNCC: 5 | RNVC: 2

6 Aug 1986

5975-01-242-0582
Electrical Components Tie Down Strap

012420582
7134K2: RNCC: 3 | RNVC: 2

6 Oct 1986

5975-01-237-7416
Electrical Conduit Bushing

012377416
3365749-1: RNCC: 3 | RNVC: 9
3365749-1: RNCC: 5 | RNVC: 2
3365749-1: RNCC: 5 | RNVC: 2
5975PL1439128: RNCC: 6 | RNVC: 9

5 Aug 1986

5975-01-246-6908
Cable Strain Relief Bushing

012466908
1224151-6: RNCC: 3 | RNVC: 9
1224151-6: RNCC: C | RNVC: 1

18 Dec 1986

5975-01-246-7137
Cable Terminal Chamber

012467137
7653138-30: RNCC: 3 | RNVC: 9
7653138-30: RNCC: C | RNVC: 1

18 Dec 1986

5975-01-249-5858
Flexible Metal Conduit

012495858
309D067-1: RNCC: 3 | RNVC: 2

13 Feb 1987

5975-01-254-0420
Electrical Box Connector

012540420
3306M: RNCC: 3 | RNVC: 2
3119: RNCC: E | RNVC: 8
27-150-IT: RNCC: E | RNVC: 8

30 Apr 1987

5975-01-252-7302
Cable Hanger

012527302
AS23190: RNCC: 3 | RNVC: 1
M23190/1-7: RNCC: 3 | RNVC: 2
NMC1001-7: RNCC: 3 | RNVC: 2
MIL-S-23190/1: RNCC: 5 | RNVC: 9
AS23190: RNCC: 5 | RNVC: 9
M23190/1-7: RNCC: 5 | RNVC: 9
M23190/1-7: RNCC: 5 | RNVC: 9

6 Apr 1987

5975-01-256-3415
Strain Electrical Conductor Clamp

012563415
6650-01143-1: RNCC: 3 | RNVC: 9
6650-01143-1: RNCC: 5 | RNVC: 2
6650-01143-1: RNCC: 5 | RNVC: 9
6650-01143-1: RNCC: 5 | RNVC: 9

4 Jun 1987

5975-01-257-1054
Junction Box

012571054
BI-3-E59: RNCC: 3 | RNVC: 2
GJ800AU1E: RNCC: 5 | RNVC: 2

12 Jun 1987

5975-01-210-8104
Electrical Nonmetallic Conduit Assembly

012108104
R58HB16G36W006: RNCC: 3 | RNVC: 1
R58HB16G36W006: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 9

18 Jun 1985

5975-01-214-3510
Electrical Nonmetallic Conduit Assembly

012143510
R58HB31B34W020: RNCC: 3 | RNVC: 1
R58HB31B34W020: RNCC: 5 | RNVC: 9
R58HB: RNCC: D | RNVC: 9

9 Aug 1985

5975-01-215-6700
Electrical Equipment Cabinet

012156700
1455750U: RNCC: 3 | RNVC: 2
9230L2000: RNCC: 5 | RNVC: 2
1455750U: RNCC: 5 | RNVC: 9

29 Aug 1985

5975-01-215-6500
Electrical Box Connector

012156500
CGB297-SG: RNCC: 3 | RNVC: 2
CG-7575S: RNCC: 5 | RNVC: 2
SHC1038SST: RNCC: E | RNVC: 8

28 Aug 1985

5975-01-215-7592
Electrical Tie Down Mounting Base

012157592
ABMM-4A: RNCC: 3 | RNVC: 2
TC5347A: RNCC: 5 | RNVC: 2
TC5347A: RNCC: 5 | RNVC: 2
08461: RNCC: 5 | RNVC: 2

30 Aug 1985

5975-01-217-1498
Electrical Cable Nipple

012171498
11-3438-5: RNCC: 3 | RNVC: 2

22 Sep 1985

5975-01-217-1539
Metallic Raceway

012171539
V2100B IVORY: RNCC: 3 | RNVC: 2
EG2100B: RNCC: 5 | RNVC: 2
G2100B: RNCC: 5 | RNVC: 2
7903811-00: RNCC: 7 | RNVC: 2

22 Sep 1985

5975-01-216-9199
Electrical Nonmetallic Conduit Assembly

012169199
251009: RNCC: 3 | RNVC: 2

18 Sep 1985

5975-01-258-6235
Electrical Nonmetallic Conduit Assembly

012586235
R58HB07B32A008: RNCC: 3 | RNVC: 2
R58HB07B32A008: RNCC: 5 | RNVC: 2
R58HB07B32A008: RNCC: 5 | RNVC: 9

5 Jul 1987

5975-01-259-6848
Interconnecting Box

012596848
702055-1: RNCC: 3 | RNVC: 2
702055-1: RNCC: 3 | RNVC: 9
702055-301: RNCC: 5 | RNVC: 1
702055-301: RNCC: 5 | RNVC: 9

20 Jul 1987

5975-01-262-5790
Electrical Components Tie Down Strap

012625790
PLT8EH-C0: RNCC: 3 | RNVC: 2
WP11015-1: RNCC: 5 | RNVC: 2

31 Aug 1987

5975-01-263-3769
Electrical Box Connector

012633769
7119K63: RNCC: 3 | RNVC: 2

14 Sep 1987

5975-01-263-5315
Electrical Nonmetallic Conduit Assembly

012635315
252899: RNCC: 3 | RNVC: 2
R58HB11B31A012A: RNCC: 5 | RNVC: 2
R58HB11B31A012A: RNCC: 5 | RNVC: 9

16 Sep 1987

5975-01-263-3845
Flexible Nonmetallic Conduit

012633845
RT1150 CONVOLEX: RNCC: 3 | RNVC: 1
HCTE-0625: RNCC: 3 | RNVC: 2
GS830BM6: RNCC: 5 | RNVC: 2
GS830BMG: RNCC: 5 | RNVC: 9
RT1150 5-8: RNCC: C | RNVC: 1

14 Sep 1987

5975-01-265-5122
Junction Box

012655122
4B69135-115A: RNCC: 3 | RNVC: 2

15 Oct 1987

5975-01-268-1945
Electrical Box Connector

012681945
2279: RNCC: 3 | RNVC: 2
BS-72101: RNCC: D | RNVC: 9

25 Nov 1987

5975-01-268-6437
Electrical Box Connector

012686437
1244141-3: RNCC: 3 | RNVC: 9
5372: RNCC: 5 | RNVC: 2
1244141-3: RNCC: C | RNVC: 1

4 Dec 1987

5975-01-270-4587
Junction Box

012704587
12341467: RNCC: 3 | RNVC: 2
12341467: RNCC: 3 | RNVC: 2
5598045: RNCC: 3 | RNVC: 9

7 Jan 1988

5975-01-269-6543
Electrical Grounding Plate

012696543
405-10113-501: RNCC: 3 | RNVC: 2

18 Dec 1987

5975-01-271-5668
Flexible Metal Conduit Assembly

012715668
405-10774-2: RNCC: 3 | RNVC: 2

28 Jan 1988

5975-01-275-2697
Stuffing Tube Packing Nut

012752697
M24235/1-024: RNCC: 2 | RNVC: 2
MIL-S-24235/1: RNCC: 4 | RNVC: 1
MIL-S-24235/1-024: RNCC: 5 | RNVC: 9

19 Mar 1988

5975-01-276-5228
Junction Box

012765228
B114R: RNCC: 3 | RNVC: 9
00034481100157: RNCC: 5 | RNVC: 9
6090-402: RNCC: 5 | RNVC: 9

9 Apr 1988

5975-01-121-1596
Rigid Metal Conduit Assembly

011211596
13220E8838: RNCC: 3 | RNVC: 2

31 Oct 1981

5975-01-133-6689
Strain Relief Boot

011336689
5M1729-001: RNCC: 3 | RNVC: 2
31-1277-1: RNCC: 5 | RNVC: 2
10138449: RNCC: 6 | RNVC: 9

18 Jun 1982

5975-01-135-8708
Junction Box

011358708
65560-05125-101: RNCC: 1 | RNVC: 2
B1289-101: RNCC: 3 | RNVC: 2

30 Jul 1982

5975-01-217-3272
Rigid Metal Conduit Assembly

012173272
5904030-4: RNCC: 1 | RNVC: 2
7-1477-4: RNCC: 3 | RNVC: 2
211258-DI0090: RNCC: 3 | RNVC: 2
5904030-4: RNCC: 5 | RNVC: 1

26 Sep 1985

5975-01-218-3319
Junction Box

012183319
AB-12105JFH: RNCC: 3 | RNVC: 2
A1210CHNF: RNCC: 3 | RNVC: 2
A1210CHNF: RNCC: 5 | RNVC: 2
A2110CHNF: RNCC: 5 | RNVC: 9
E-1210CHNF: RNCC: 5 | RNVC: 9
A1210CHNF: RNCC: 5 | RNVC: 9

10 Oct 1985

5975-01-216-8554
Electrical Equipment Mounting Base

012168554
1416310W: RNCC: 3 | RNVC: 2
1416310W: RNCC: 5 | RNVC: 9

17 Sep 1985

5975-01-219-2005
Junction Box

012192005
1464640: RNCC: 3 | RNVC: 2
1464640: RNCC: 5 | RNVC: 9

23 Oct 1985

5975-01-219-8432
Electrical Conduit Elbow

012198432
033597-0003: RNCC: 3 | RNVC: 2
LMFL90-100: RNCC: 5 | RNVC: 2
LMFL90-100: RNCC: C | RNVC: 1

3 Nov 1985

5975-01-210-6636
Rigid Metal Conduit

012106636
4G14349-101A: RNCC: 3 | RNVC: 2

15 Jun 1985

5975-01-068-7376
Electrical Equipment Shelf

010687376
1494-0015: RNCC: 3 | RNVC: 9
1494-0015: RNCC: 5 | RNVC: 9
10350764: RNCC: 6 | RNVC: 9
1494-0015: RNCC: C | RNVC: 1

1 Dec 1978

5975-01-069-9511
Electrical-Electronic Equipment Chassis

010699511
CU1099: RNCC: 3 | RNVC: 2
6902259: RNCC: C | RNVC: 1

29 Dec 1978

5975-01-073-6184
Electrical Equipment Mounting Base

010736184
792-6917-003: RNCC: 3 | RNVC: 2
797-7685-001: RNCC: 5 | RNVC: 1

18 Mar 1979

5975-01-075-0576
Electrical Box

010750576
4B69133-103A: RNCC: 3 | RNVC: 2

12 Apr 1979

5975-01-075-0570
Electrical Box

010750570
4B69131-103A: RNCC: 3 | RNVC: 2
4B69131-103A: RNCC: 5 | RNVC: 2

12 Apr 1979

5975-01-078-4106
Electrical Wall Plate

010784106
SS26: RNCC: 3 | RNVC: 9
S26N: RNCC: 5 | RNVC: 9

12 Jun 1979

5975-01-079-4087
Electric Box

010794087
4B69151-105A: RNCC: 3 | RNVC: 2
4B69151-105A: RNCC: 5 | RNVC: 2

5 Jul 1979

5975-01-079-4085
Box Junction Cover

010794085
M129-52: RNCC: 3 | RNVC: 2
M129-52: RNCC: 5 | RNVC: 9

5 Jul 1979

5975-01-080-2679
Electrical Conduit Locknut

010802679
142-TB: RNCC: 3 | RNVC: 2
142: RNCC: 5 | RNVC: 9
54B6891H06: RNCC: 7 | RNVC: 2

22 Jul 1979

5975-01-085-4520
Electrical Conductor Bushing

010854520
20350-1080: RNCC: 3 | RNVC: 2

8 Nov 1979

5975-01-091-7849
Electrical Conduit Locknut

010917849
10959867: RNCC: 3 | RNVC: 2

13 Mar 1980

5975-01-092-8655
Electrical Conductor Bushing

010928655
12408: RNCC: 3 | RNVC: 2

5 Apr 1980

5975-01-098-8573
Electrical Box Connector

010988573
CGB195 SG: RNCC: 3 | RNVC: 2
SR-50-625: RNCC: 5 | RNVC: 9
CGB195-SG: RNCC: 5 | RNVC: 9

8 Aug 1980

5975-01-101-4301
Bushing

011014301
1617214-1: RNCC: 3 | RNVC: 2

30 Sep 1980

5975-01-103-4260
Lightening Hole Cable Mount

011034260
LHMSS5: RNCC: 3 | RNVC: 2

13 Nov 1980

5975-01-115-1315
Rigid Metal Conduit Assembly

011151315
4B69143-137A: RNCC: 3 | RNVC: 2

28 Jun 1981

5975-01-117-9491
Stuffing Tube

011179491
54016-3: RNCC: 3 | RNVC: 2
147206-1: RNCC: 5 | RNVC: 1
54016-1: RNCC: 5 | RNVC: 9
147206-1: RNCC: C | RNVC: 1

24 Aug 1981

5975-01-118-8368
Electrical Conduit Adapter

011188368
RP2321-03-06: RNCC: 3 | RNVC: 1
RP2321-03-06: RNCC: 3 | RNVC: 1
RP2321-03-06SM: RNCC: 3 | RNVC: 2
S82321-03-06: RNCC: 5 | RNVC: 1
RP2321-03-06: RNCC: 5 | RNVC: 2
S82321-03-06: RNCC: 5 | RNVC: 9
RP2321-03-06: RNCC: 5 | RNVC: 9
164-201-1S: RNCC: C | RNVC: 1
RP2320-03-06: RNCC: C | RNVC: 1
RP2321-(0.9375-: RNCC: C | RNVC: 1

12 Sep 1981

5975-01-118-8371
Electrical Conduit Coupling

011188371
7000-690-EM05: RNCC: 3 | RNVC: 2
RP2200-EM05: RNCC: 3 | RNVC: 2
S82200-EM05: RNCC: 3 | RNVC: 2
RP2200-EM05: RNCC: 5 | RNVC: 1
S82200-EM05: RNCC: 5 | RNVC: 9
RP2200-G05: RNCC: 5 | RNVC: 9
RP2200-F05: RNCC: 5 | RNVC: 9
RP2200-EM05: RNCC: 7 | RNVC: 1

12 Sep 1981

5975-01-119-0190
Flexible Metal Conduit Assembly

011190190
10911023: RNCC: 1 | RNVC: 2
W-1297-16: RNCC: 3 | RNVC: 2
179489-1800: RNCC: 3 | RNVC: 2
9711297: RNCC: 5 | RNVC: 9
8711297: RNCC: D | RNVC: 9

16 Sep 1981

5975-01-121-0741
Conduit Connector

011210741
81010: RNCC: 3 | RNVC: 9
FEH01-M32: RNCC: 5 | RNVC: 2
81010: RNCC: 5 | RNVC: 9
81010: RNCC: 5 | RNVC: 9

30 Oct 1981

5975-01-121-1359
Electrical Tie Down Mounting Base

011211359
TC824: RNCC: 3 | RNVC: 2
717612-8: RNCC: 7 | RNVC: 2

31 Oct 1981

5975-01-123-2823
Electrical Conduit Coupling Nut

011232823
31-4741-1: RNCC: 3 | RNVC: 2
10134290: RNCC: 6 | RNVC: 9

10 Dec 1981

5975-01-123-9103
Ground Rod Section

011239103
635830: RNCC: 3 | RNVC: 2
6253: RNCC: 5 | RNVC: 9
W-583: RNCC: 5 | RNVC: 9

19 Dec 1981

5975-01-125-7523
Electrical Conductor Bushing

011257523
74B878001-125: RNCC: 1 | RNVC: 2
CT0904-03A: RNCC: 3 | RNVC: 2

1 Feb 1982

5975-01-125-7524
Electrical Cable Nipple

011257524
283A8009P1: RNCC: 3 | RNVC: 2
10134285: RNCC: 6 | RNVC: 9

1 Feb 1982

5975-01-126-8352
Electrical Components Tie Down Strap

011268352
9475824-10: RNCC: 3 | RNVC: 2
9475824-10: RNCC: 5 | RNVC: 9
7000988-2: RNCC: 5 | RNVC: 9

17 Feb 1982

5975-01-129-8366
Kit Sealing Boot

011298366
CH06-0261-023: RNCC: 3 | RNVC: 2
GB806AH1: RNCC: 7 | RNVC: 2

12 Apr 1982

5975-01-130-2579
Junction Box Cover

011302579
65560-03151-103: RNCC: 3 | RNVC: 2

19 Apr 1982

5975-01-131-9487
Electrical Box Connector

011319487
SHC-1018: RNCC: 3 | RNVC: 2
DHF9S176: RNCC: E | RNVC: 8
G6015252: RNCC: E | RNVC: 8

19 May 1982

5975-01-134-2271
Ctj Rail

011342271
CTJ3A05-4021: RNCC: 3 | RNVC: 2

2 Jul 1982

5975-01-136-4148
Blank Panel

011364148
74A802615-1006: RNCC: 3 | RNVC: 2
74A802615-1006: RNCC: 5 | RNVC: 9
10154463: RNCC: 6 | RNVC: 9

8 Aug 1982

5975-01-140-0795
Electrical-Electronic Equipment Chassis

011400795
800-RHW-02-01-4: RNCC: 3 | RNVC: 2

7 Oct 1982

5975-01-144-2246
Ground Rod

011442246
ACC-1-2-6-BA-8-HA: RNCC: 3 | RNVC: 2
C50000339-1: RNCC: 5 | RNVC: 9
ACC-1-2-6-B-8-HA: RNCC: 5 | RNVC: 9
ACC-1-2-6-B: RNCC: 5 | RNVC: 9
SM-A-801254-1: RNCC: 7 | RNVC: 2
SM-A-801254: RNCC: D | RNVC: 9

16 Dec 1982

5975-01-146-0947
Conduit Outlet

011460947
59202: RNCC: 3 | RNVC: 2
E986F: RNCC: 5 | RNVC: 2
SML000367: RNCC: 5 | RNVC: 2
E986F: RNCC: 5 | RNVC: 9

24 Jan 1983

5975-01-148-4648
Electrical Tie Down Mounting Base

011484648
LPMM-S5-C: RNCC: 3 | RNVC: 2
LPMM-S5: RNCC: 5 | RNVC: 2
PMS3339-002-01: RNCC: 5 | RNVC: 2
LPMM-S5: RNCC: 5 | RNVC: 2
25233-00673: RNCC: 5 | RNVC: 9
13229787: RNCC: 7 | RNVC: 2
25233-00673: RNCC: C | RNVC: 1
86-1345415-2: RNCC: D | RNVC: 9

6 Mar 1983

5975-01-148-6291
Electrical-Electronic Equipment Chassis

011486291
605-012-001: RNCC: 3 | RNVC: 2
605-012-001: RNCC: 5 | RNVC: 1

8 Mar 1983

5975-01-149-6328
Electrical-Electronic Equipment Chassis

011496328
647-3189-001: RNCC: 3 | RNVC: 2
647-319-001: RNCC: C | RNVC: 1

23 Mar 1983

5975-01-156-8968
Blank Panel

011568968
74A802613-1004: RNCC: 3 | RNVC: 2
74A802613-1004: RNCC: 5 | RNVC: 9
74A803613-1004: RNCC: 5 | RNVC: 9
10154466: RNCC: 6 | RNVC: 9

27 Jun 1983

5975-01-157-4147
Electrical Components Tie Down Strap

011574147
8428099: RNCC: 3 | RNVC: 2

5 Jul 1983

5975-01-158-5092
Cable Pressure Pad

011585092
RE-B102121-2: RNCC: 3 | RNVC: 2
ASC1539735: RNCC: 5 | RNVC: 9
RE-D102121-2: RNCC: C | RNVC: 1

25 Jul 1983

5975-01-178-4505
Stuffing Tube Packing Nut

011784505
M24235/9-066: RNCC: 2 | RNVC: 2
MIL-S-24235/9: RNCC: 4 | RNVC: 1

5 May 1984

5975-01-178-4508
Stuffing Tube Packing Nut

011784508
M24235/9-062: RNCC: 2 | RNVC: 2
MIL-S-24235/9: RNCC: 4 | RNVC: 1

5 May 1984

5975-01-179-6225
Blank Panel

011796225
A8P6AL: RNCC: 3 | RNVC: 2

19 May 1984

5975-01-180-9789
Arrangement Conduit

011809789
P12613065N: RNCC: 3 | RNVC: 2
P12613065N: RNCC: 3 | RNVC: 9

6 Jun 1984

5975-01-182-2068
Junction Box

011822068
5035443-1: RNCC: 3 | RNVC: 2
5035443-1: RNCC: 5 | RNVC: 2
5035443-1: RNCC: 5 | RNVC: 9

22 Jun 1984

5975-01-180-9785
Block Assembly Junction

011809785
P12613007: RNCC: 3 | RNVC: 9
P12613007: RNCC: C | RNVC: 1

6 Jun 1984

5975-01-186-9954
Conduit Outlet

011869954
5345-0: RNCC: 3 | RNVC: 2
277-5L: RNCC: 5 | RNVC: 9
5345: RNCC: 5 | RNVC: 9

17 Aug 1984

5975-01-163-1098
Cable Marker Sleeve

011631098
SS7074-1692: RNCC: 3 | RNVC: 2
SS7074-1692: RNCC: 5 | RNVC: 2
SS7074-1692: RNCC: 5 | RNVC: 2

28 Sep 1983

5975-01-167-5797
Electrical Box Connector

011675797
3207: RNCC: 3 | RNVC: 2
GC817Y1: RNCC: 7 | RNVC: 2
62828-90216-1: RNCC: C | RNVC: 1

1 Dec 1983

5975-01-171-2841
Cable Hanger

011712841
691163-0001: RNCC: 3 | RNVC: 2
858435-1: RNCC: 5 | RNVC: 2
691163-1: RNCC: 5 | RNVC: 9
691163: RNCC: C | RNVC: 1

4 Feb 1984

5975-01-173-9578
Blank Panel

011739578
5381310: RNCC: 3 | RNVC: 2
A12P10SS: RNCC: 5 | RNVC: 2
A12P10SS: RNCC: C | RNVC: 1

13 Mar 1984

5975-01-174-3601
Conduit Outlet

011743601
T100-A: RNCC: 3 | RNVC: 2
OT-3: RNCC: 3 | RNVC: 2
9322116: RNCC: 7 | RNVC: 2

16 Mar 1984

5975-01-174-9373
Junction Box

011749373
A806NFAL: RNCC: 3 | RNVC: 2
A806NFAL: RNCC: 3 | RNVC: 2
AB-864JCA: RNCC: 5 | RNVC: 2
E-806NFAL: RNCC: 5 | RNVC: 9

24 Mar 1984

5975-01-175-2031
Electrical Conduit Elbow

011752031
823: RNCC: 3 | RNVC: 2
823: RNCC: 3 | RNVC: 9
7-1203: RNCC: 5 | RNVC: 9
9290908: RNCC: 7 | RNVC: 2
FFL125: RNCC: E | RNVC: 8
FF-125: RNCC: E | RNVC: 8

28 Mar 1984

5975-01-175-3168
Electrical Wall Plate

011753168
7424: RNCC: 3 | RNVC: 2

29 Mar 1984

5975-01-195-8701
Electrical Box Connector

011958701
3721: RNCC: 3 | RNVC: 2
3902: RNCC: 5 | RNVC: 9

4 Dec 1984

5975-01-198-7178
Electrical Equipment Mounting Base

011987178
622-6985-001: RNCC: 3 | RNVC: 2
MT6369/ARC-190: RNCC: 5 | RNVC: 1
622-6895-001: RNCC: 5 | RNVC: 9
4K95000-143A: RNCC: 5 | RNVC: 9

11 Jan 1985

5975-01-199-9037
Rigid Metal Conduit

011999037
795-9024-001: RNCC: 3 | RNVC: 2
795-9024-001: RNCC: 5 | RNVC: 9

28 Jan 1985

5975-01-201-1019
Electrical Conduit Ferrule

012011019
16022-SS-6B: RNCC: 3 | RNVC: 2
7244752: RNCC: 5 | RNVC: 2
2326111: RNCC: 5 | RNVC: 9
16022-SS-6B: RNCC: 5 | RNVC: 9

12 Feb 1985

5975-01-207-0231
Electrical Box Connector

012070231
NHC-1023: RNCC: 3 | RNVC: 2
NHC-1023: RNCC: 3 | RNVC: 9
5035887-1: RNCC: 7 | RNVC: 9

26 Apr 1985

5975-01-208-5760
Electrical Cable Nipple

012085760
12719785-2: RNCC: 3 | RNVC: 2
12719786-2: RNCC: 5 | RNVC: 2
202F242-51: RNCC: 5 | RNVC: 2
202F242-5: RNCC: 5 | RNVC: 9
EP-202F242: RNCC: 5 | RNVC: 9
313F353-9: RNCC: 5 | RNVC: 9
13238510-4: RNCC: 7 | RNVC: 2

15 May 1985

5975-01-209-5479
Rigid Metal Conduit

012095479
121-50726-1: RNCC: 3 | RNVC: 2

1 Jun 1985

5975-01-228-9530
Electrical Nonmetallic Conduit Assembly

012289530
R58HB16H55W012D: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 9

22 Mar 1986

5975-01-230-5891
Conduit Outlet

012305891
122-52827-1: RNCC: 3 | RNVC: 2

16 Apr 1986

5975-01-231-5231
Conduit Outlet

012315231
OLL-2: RNCC: 3 | RNVC: 2

29 Apr 1986

5975-01-231-6081
Electrical Equipment Cabinet

012316081
276079: RNCC: 3 | RNVC: 2

30 Apr 1986

5975-01-238-9555
Adapter

012389555
6166890: RNCC: 3 | RNVC: 2
014000-4000: RNCC: 5 | RNVC: 2

23 Aug 1986

5975-01-238-9564
Quadrax Adapter

012389564
019900-4004: RNCC: 3 | RNVC: 2
6166887: RNCC: 5 | RNVC: 2

23 Aug 1986

5975-01-239-2353
Cable Hanger

012392353
101-107-451: RNCC: 3 | RNVC: 2

27 Aug 1986

5975-01-243-9962
Blank Panel

012439962
GP500DG-5: RNCC: 3 | RNVC: 2
G436-5: RNCC: 5 | RNVC: 9

5 Nov 1986

5975-01-244-6407
Ground Rod Section

012446407
13225E3032-35: RNCC: 3 | RNVC: 2
60C: RNCC: 5 | RNVC: 9
60C: RNCC: 5 | RNVC: 9

15 Nov 1986

5975-01-246-6909
Cable Strain Relief Bushing

012466909
1224151-7: RNCC: 3 | RNVC: 9
1224151-7: RNCC: C | RNVC: 1

18 Dec 1986

5975-01-247-2080
Cable Marker Sleeve

012472080
TMS 1/4-1.50: RNCC: 3 | RNVC: 2
GM802J25: RNCC: 5 | RNVC: 2
HS5189-1251: RNCC: 5 | RNVC: 9
HS5189-1251: RNCC: 7 | RNVC: 2

29 Dec 1986

5975-01-246-6905
Cable Strain Relief Bushing

012466905
1224151-3: RNCC: 3 | RNVC: 2
1224151-3: RNCC: 3 | RNVC: 9
1224151-3: RNCC: 5 | RNVC: 9

18 Dec 1986

5975-01-251-1250
Electrical Equipment Mounting Base

012511250
622-8619-001: RNCC: 3 | RNVC: 2
MT-6586/S: RNCC: 5 | RNVC: 2
ASC1564936: RNCC: 5 | RNVC: 9

13 Mar 1987

5975-01-251-7566
Electrical Box Connector

012517566
2574: RNCC: 3 | RNVC: 2

24 Mar 1987

5975-01-253-6583
Electrical Cable Protector

012536583
YJ4-125H: RNCC: 3 | RNVC: 9
PSI-4HM: RNCC: 5 | RNVC: 9
YJ4-125YB: RNCC: 5 | RNVC: 9
YJ4-125H: RNCC: 5 | RNVC: 9

23 Apr 1987

5975-01-254-1635
Electrical Nonmetallic Conduit Assembly

012541635
R58HB06B36W048: RNCC: 3 | RNVC: 2
R58HB03B36W048: RNCC: 5 | RNVC: 9
R58HB: RNCC: D | RNVC: 9

2 May 1987

NSN 5975-01-254-8380 012548380 COVER,CONDUIT OUTLET

5975-01-254-8380
Conduit Outlet Cover

012548380
G-3043BE: RNCC: 3 | RNVC: 2

11 May 1987

5975-01-256-4538
Electrical Equipment Rack

012564538
209-071-526-101: RNCC: 3 | RNVC: 2

5 Jun 1987

5975-01-255-9577
Flexible Nonmetallic Conduit

012559577
M81914/1-1001: RNCC: 2 | RNVC: 1
SAE-AS81914/4: RNCC: 5 | RNVC: 1
SAE-AS81914/1: RNCC: 5 | RNVC: 1
T0610A00: RNCC: 5 | RNVC: 1
MIL-T-81914/1: RNCC: 5 | RNVC: 9

30 May 1987

5975-01-212-3651
Cable Shield Adapter

012123651
CSGA-L: RNCC: 3 | RNVC: 2
GA/CSGA-L: RNCC: 5 | RNVC: 2
CSGA-L: RNCC: 5 | RNVC: 9

11 Jul 1985

5975-01-214-3499
Electrical Nonmetallic Conduit Assembly

012143499
R58HB06D45W010A: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 9

9 Aug 1985

5975-01-214-8508
Electrical Nonmetallic Conduit Assembly

012148508
R58HA04B33W010: RNCC: 3 | RNVC: 1
R58HA04B33W010: RNCC: 5 | RNVC: 9
R58HA: RNCC: D | RNVC: 9

16 Aug 1985

5975-01-258-4333
Rigid Metal Conduit Assembly

012584333
75A602502-1001: RNCC: 3 | RNVC: 2

3 Jul 1987

5975-01-257-3117
Electrical Components Tie Down Strap

012573117
PLF1MA: RNCC: 3 | RNVC: 2
CV0677-001: RNCC: 5 | RNVC: 2

17 Jun 1987

5975-01-260-1302
Electrical Components Tie Down Strap

012601302
1049-40: RNCC: 3 | RNVC: 2

26 Jul 1987

5975-01-260-7134
Junction Box

012607134
L6410070-009: RNCC: 3 | RNVC: 2

4 Aug 1987

5975-01-262-8475
Electrical Box Connector

012628475
SHC1036: RNCC: 3 | RNVC: 2
64-0179: RNCC: C | RNVC: 1

4 Sep 1987

5975-01-265-3116
Electrical Components Tie Down Strap

012653116
MLT2S-CP: RNCC: 3 | RNVC: 2
0241 1262: RNCC: 5 | RNVC: 2
ST45D52-1: RNCC: 7 | RNVC: 2

11 Oct 1987

5975-01-270-8552
Junction Box Cover

012708552
5597326: RNCC: 3 | RNVC: 1
12341003: RNCC: 3 | RNVC: 2

14 Jan 1988

5975-01-271-0322
Electrical Equipment Mounting Base

012710322
12359325: RNCC: 3 | RNVC: 2

16 Jan 1988

5975-01-271-4008
Electrical Conduit Bushing

012714008
12354871: RNCC: 3 | RNVC: 2

23 Jan 1988

5975-01-273-7757
Electrical Conduit Bend

012737757
Z1621C40: RNCC: 1 | RNVC: 2
LMS9-29: RNCC: 3 | RNVC: 2

1 Mar 1988

5975-01-274-0320
Junction Box

012740320
A6044SC: RNCC: 3 | RNVC: 2
5122609-015-101: RNCC: 7 | RNVC: 2

4 Mar 1988

5975-01-277-5822
Electrical Conduit Adapter

012775822
C036AX1212DC: RNCC: 3 | RNVC: 2
5122609-031-145: RNCC: 5 | RNVC: 2

23 Apr 1988

5975-01-279-7544
Interconnecting Box

012797544
5100574: RNCC: 3 | RNVC: 9
5100574: RNCC: 5 | RNVC: 2
5100574: RNCC: 7 | RNVC: 2

24 May 1988

5975-01-280-0533
Electrical Conduit Locknut

012800533
040-141: RNCC: 3 | RNVC: 2
5054520-15: RNCC: 5 | RNVC: 9
5054520: RNCC: 7 | RNVC: 9

29 May 1988

5975-01-280-8922
Electrical Cable Nipple

012808922
550N9V14: RNCC: 3 | RNVC: 2
5501: RNCC: 5 | RNVC: 9
5597325: RNCC: 5 | RNVC: 9
5975012808922: RNCC: 6 | RNVC: 9

14 Jun 1988

5975-01-282-8825
Clevis Adapter

012828825
21170: RNCC: 3 | RNVC: 2
21170-1: RNCC: 5 | RNVC: 9

24 Jul 1988

5975-01-067-0425
Transd Junction Box

010670425
8TY34AAB1: RNCC: 3 | RNVC: 2
8TY34AAB: RNCC: 5 | RNVC: 9

24 Oct 1978

5975-01-067-7638
Electrical Conduit

010677638
68A230167-2007: RNCC: 3 | RNVC: 2
68A230167-2005: RNCC: 5 | RNVC: 9

6 Nov 1978

5975-01-068-8816
Electrical Equipment Mounting Base

010688816
10-30353-537: RNCC: 1 | RNVC: 2
22835-1: RNCC: 3 | RNVC: 2
22835-1: RNCC: 5 | RNVC: 2

6 Dec 1978

5975-01-073-9853
Electrical Wall Plate

010739853
12285346: RNCC: 3 | RNVC: 2

24 Mar 1979

5975-01-075-0582
Electrical Box

010750582
4B69151-119A: RNCC: 3 | RNVC: 2

12 Apr 1979

5975-01-075-8946
Conduit Outlet

010758946
3606: RNCC: 3 | RNVC: 2
SC5975-0065-3: RNCC: 5 | RNVC: 9
3606: RNCC: 5 | RNVC: 9
GJ800AY1: RNCC: 7 | RNVC: 2

29 Apr 1979

5975-01-078-0332
Electrical Equipment Mounting Base

010780332
622-1319-001: RNCC: 3 | RNVC: 2
622-1319-001: RNCC: 3 | RNVC: 2
16VZ001-6: RNCC: 5 | RNVC: 1
MT-4608/ARN-108: RNCC: 5 | RNVC: 9
16VE032002-1: RNCC: 7 | RNVC: 2

5 Jun 1979

5975-01-078-7597
Electrical Modular Receptacle Connector

010787597
12273236-3: RNCC: 3 | RNVC: 2
CTJ-1-20-E-01B-513: RNCC: 5 | RNVC: 2

20 Jun 1979

5975-01-079-3940
Junction Box

010793940
95: RNCC: 3 | RNVC: 2
410: RNCC: 5 | RNVC: 2

4 Jul 1979

5975-01-079-4081
Box Junction Cover

010794081
M129-54: RNCC: 3 | RNVC: 2
M129-54: RNCC: 5 | RNVC: 9

5 Jul 1979

5975-01-083-0149
Electrical Conductor Bushing

010830149
BBL150: RNCC: 3 | RNVC: 9
C70412-15: RNCC: 5 | RNVC: 9

14 Sep 1979

5975-01-083-3162
Electrical Cable Nipple

010833162
12273147-220: RNCC: 1 | RNVC: 2
202F221-51-0: RNCC: 3 | RNVC: 2
13238510-2: RNCC: 5 | RNVC: 1
313F332-9: RNCC: 5 | RNVC: 2
313F332-9: RNCC: 5 | RNVC: 9
202F221-51: RNCC: 5 | RNVC: 9
313F332-9: RNCC: 5 | RNVC: 9
12273147: RNCC: D | RNVC: 9

21 Sep 1979

5975-01-084-8216
Transmission Line Grounding Set

010848216
4491155-G-30: RNCC: 3 | RNVC: 2

25 Oct 1979

5975-01-089-5477
Flexible Metal Conduit

010895477
CABC20-3N-6702: RNCC: 3 | RNVC: 2

4 Feb 1980

5975-01-090-4772
Blank Panel

010904772
9M381A0: RNCC: 3 | RNVC: 2
9M381A0: RNCC: 5 | RNVC: 9

18 Feb 1980

5975-01-094-2362
Electrical Tie Down Mounting Base

010942362
317762-1: RNCC: 3 | RNVC: 2
317762-1: RNCC: 5 | RNVC: 2
317762-P1: RNCC: 5 | RNVC: 9
317762-1: RNCC: 5 | RNVC: 9
11442329: RNCC: 5 | RNVC: 9

6 May 1980

5975-01-095-3157
Adhes Mounting Base

010953157
16580: RNCC: 3 | RNVC: 2
TC-5342A: RNCC: 5 | RNVC: 2

29 May 1980

5975-01-104-1128
Flexible Nonmetallic Conduit

011041128
SAE-AS81914/4: RNCC: 3 | RNVC: 1
M81914/4-1004: RNCC: 3 | RNVC: 2
M81914/4-1204: RNCC: 5 | RNVC: 9
MIL-T-81914: RNCC: 5 | RNVC: 9
M81914/4-1204: RNCC: 5 | RNVC: 9
10150496: RNCC: 6 | RNVC: 9

27 Nov 1980

5975-01-111-2203
Electrical Wall Plate

011112203
G3046BE: RNCC: 3 | RNVC: 2
SM-D-887872-2: RNCC: 3 | RNVC: 2
G-3046B: RNCC: 5 | RNVC: 9
0099-3-3069: RNCC: 5 | RNVC: 9

12 Apr 1981

5975-01-112-0837
Electrical Box Connector

011120837
1803: RNCC: 3 | RNVC: 2
NTC-75: RNCC: 3 | RNVC: 2
NT2751: RNCC: 5 | RNVC: 9
31-075: RNCC: 5 | RNVC: 9

26 Apr 1981

5975-01-112-3115
Electrical Box Connector

011123115
ZA-16: RNCC: 3 | RNVC: 2
GC830C39: RNCC: 7 | RNVC: 2
DB33916: RNCC: E | RNVC: 8
RSR-309: RNCC: E | RNVC: 8

1 May 1981

5975-01-112-6595
Rigid Metal Conduit Assembly

011126595
4B69142-135A: RNCC: 3 | RNVC: 2

8 May 1981

5975-01-112-6602
Rigid Metal Conduit Assembly

011126602
4B69143-135A: RNCC: 3 | RNVC: 2

8 May 1981

5975-01-114-1519
Insulator Bracket

011141519
70902-01087-104: RNCC: 3 | RNVC: 2

11 Jun 1981

5975-01-118-7633
Juncti Box Assembly

011187633
204-53149-6: RNCC: 3 | RNVC: 2

11 Sep 1981

5975-01-118-8369
Electrical Conduit Coupling

011188369
RP2200-F03: RNCC: 3 | RNVC: 2
RP2200-EM03: RNCC: 3 | RNVC: 2
RP2200-F03: RNCC: 3 | RNVC: 9
700-670: RNCC: 5 | RNVC: 1
S82200: RNCC: 5 | RNVC: 1
RP2200: RNCC: 5 | RNVC: 1
S82200-F03: RNCC: 5 | RNVC: 9
RP2200-G03: RNCC: 5 | RNVC: 9
S82200: RNCC: 5 | RNVC: 9

12 Sep 1981

5975-01-124-2341
Electrical Components Tie Down Strap

011242341
PRT1.5S-C: RNCC: 3 | RNVC: 2
PLT1.5S: RNCC: E | RNVC: 8

28 Dec 1981

5975-01-120-0297
Electrical Conductor Bushing

011200297
2057: RNCC: 3 | RNVC: 2
K500-250: RNCC: 5 | RNVC: 2
C5114364-3: RNCC: 5 | RNVC: 9

9 Oct 1981

5975-01-127-5104
Electrical Conductor Bushing

011275104
CRN2948: RNCC: 3 | RNVC: 2
5M1697-001: RNCC: 5 | RNVC: 2
10134273: RNCC: 6 | RNVC: 9

2 Mar 1982

5975-01-129-3473
Blank Panel

011293473
9M381B3: RNCC: 3 | RNVC: 2
9M381B3: RNCC: 5 | RNVC: 9

5 Apr 1982

5975-01-132-6173
Safety Sign Book

011326173
PSSB-13: RNCC: 3 | RNVC: 2

2 Jun 1982

5975-01-136-4988
Electrical Equipment Cabinet

011364988
CU-3010A: RNCC: 3 | RNVC: 2

10 Aug 1982

5975-01-137-0206
Electrical Equipment Mounting Base

011370206
641-4337-001: RNCC: 3 | RNVC: 2

19 Aug 1982

5975-01-138-7413
Electrical Components Tie Down Strap

011387413
TY-532M: RNCC: 3 | RNVC: 2

19 Sep 1982

5975-01-139-5135
Electrical Components Tie Down Strap

011395135
TY24M-8: RNCC: 3 | RNVC: 2
1400-0493: RNCC: 7 | RNVC: 2
TYB-24M-8: RNCC: C | RNVC: 1

4 Oct 1982

5975-01-139-6797
Rigid Metal Conduit Assembly

011396797
2718057: RNCC: 3 | RNVC: 2
10172980: RNCC: 6 | RNVC: 9

5 Oct 1982

5975-01-140-0761
Cable Marker Sleeve

011400761
TMS-SCE-3/4-2.0-9: RNCC: 3 | RNVC: 1
215511T85: RNCC: 3 | RNVC: 2
RNF-100-3/4X2 WHITE: RNCC: 5 | RNVC: 9
215511T85: RNCC: 7 | RNVC: 2

7 Oct 1982

5975-01-140-3081
Electrical Conductor Bushing

011403081
74B878001-109: RNCC: 1 | RNVC: 2
CT0904-05C: RNCC: 3 | RNVC: 2
CT0904-109: RNCC: 5 | RNVC: 9
174B878001-109: RNCC: C | RNVC: 1

11 Oct 1982

5975-01-142-2925
Electrical Conduit Bend

011422925
ANSI/UL797: RNCC: 3 | RNVC: 1
12275225: RNCC: 3 | RNVC: 2

14 Nov 1982

5975-01-144-1907
Electrical Conduit Adapter

011441907
E943H: RNCC: 3 | RNVC: 9
E943H: RNCC: 5 | RNVC: 2
E943H: RNCC: 5 | RNVC: 2
00034481062059: RNCC: 5 | RNVC: 9

16 Dec 1982

5975-01-145-7210
Electrical Conduit Coupling

011457210
E940D: RNCC: 3 | RNVC: 2
E940D: RNCC: 5 | RNVC: 9
00034481061014: RNCC: 5 | RNVC: 9

17 Jan 1983

5975-01-145-7211
Electrical Conduit Coupling

011457211
E940E: RNCC: 3 | RNVC: 9
00034481061021: RNCC: 5 | RNVC: 9

17 Jan 1983

5975-01-145-7407
Conduit Outlet

011457407
5133668: RNCC: 3 | RNVC: 2
E986J: RNCC: 5 | RNVC: 2
00034881065469: RNCC: 5 | RNVC: 9
00034481065463: RNCC: 5 | RNVC: 9
E986J: RNCC: 5 | RNVC: 9
E986J: RNCC: 5 | RNVC: 9

18 Jan 1983

5975-01-146-4796
Conduit Outlet

011464796
E983H: RNCC: 3 | RNVC: 2
E983H: RNCC: 3 | RNVC: 9

31 Jan 1983

5975-01-148-1501
Rigid Metal Conduit

011481501
65610-02050-103: RNCC: 3 | RNVC: 2

1 Mar 1983

5975-01-148-4589
Junction Box Cover

011484589
10-7056-01: RNCC: 3 | RNVC: 2

6 Mar 1983

5975-01-152-1960
Electrical Tie Down Mounting Base

011521960
TM3S8: RNCC: 3 | RNVC: 2
5D0061-4: RNCC: 5 | RNVC: 2
10617374-2: RNCC: 5 | RNVC: 2
STBP19M-11: RNCC: 5 | RNVC: 2
0679068: RNCC: 5 | RNVC: 2
PNUTM3S8: RNCC: 5 | RNVC: 9
G470082-8: RNCC: 7 | RNVC: 2

28 Apr 1983

5975-01-152-9353
Electrical Conduit Bushing

011529353
74B878001-127: RNCC: 1 | RNVC: 2
CT0904-127: RNCC: 3 | RNVC: 2
74B878001-127: RNCC: 5 | RNVC: 2
10134288: RNCC: 6 | RNVC: 9

11 May 1983

5975-01-157-4305
Junction Box Cover

011574305
2225880: RNCC: 3 | RNVC: 2
2BD721: RNCC: 5 | RNVC: 9
2BD726: RNCC: 5 | RNVC: 9
2225880: RNCC: 5 | RNVC: 9
45B007-P3: RNCC: 5 | RNVC: 9

6 Jul 1983

5975-01-158-0357
Electrical Box Connector

011580357
3213: RNCC: 3 | RNVC: 2
28668018-3: RNCC: 5 | RNVC: 9
8668018-3: RNCC: 5 | RNVC: 9
12364102-1: RNCC: 7 | RNVC: 2
28668018-3: RNCC: C | RNVC: 1
8668018-3: RNCC: C | RNVC: 1

15 Jul 1983

5975-01-181-2607
Electrical Tie Down Mounting Base

011812607
TC-817-TB: RNCC: 3 | RNVC: 2
650-40203: RNCC: 5 | RNVC: 1
988372-1: RNCC: 5 | RNVC: 1
352250022769: RNCC: 5 | RNVC: 2
5800583-096200-013: RNCC: 5 | RNVC: 2
T255-201: RNCC: 5 | RNVC: 2
TC-817: RNCC: 5 | RNVC: 9
TC-817: RNCC: 5 | RNVC: 9
T255-201: RNCC: 5 | RNVC: 9
8478A35H01: RNCC: C | RNVC: 1

8 Jun 1984

5975-01-183-8749
Electrical Box Connector

011838749
8525: RNCC: 3 | RNVC: 2
HC-705: RNCC: 5 | RNVC: 1
SRNTC150: RNCC: 5 | RNVC: 1
154: RNCC: 5 | RNVC: 9
3106: RNCC: 5 | RNVC: 9
28-150T: RNCC: 5 | RNVC: 9
1724B: RNCC: 5 | RNVC: 9

11 Jul 1984

5975-01-184-4834
Flexible Metal Conduit Assembly

011844834
8711301: RNCC: 1 | RNVC: 2
179489-1300: RNCC: 3 | RNVC: 2
W-1297-5: RNCC: 3 | RNVC: 2
8711297: RNCC: D | RNVC: 9

18 Jul 1984

5975-01-189-1360
Stuffing Tube

011891360
8-3070-009: RNCC: 3 | RNVC: 2

12 Sep 1984

5975-01-192-2906
Junction Box

011922906
A16H12BLP: RNCC: 3 | RNVC: 2
AB-16128NF: RNCC: 3 | RNVC: 2
1418N4B8UL: RNCC: 5 | RNVC: 2
E-16H12B: RNCC: 5 | RNVC: 9
A161208LP: RNCC: 5 | RNVC: 9

19 Oct 1984

5975-01-162-2694
Electrical Tie Down Mounting Base

011622694
TP2-C: RNCC: 3 | RNVC: 2
TP2: RNCC: 5 | RNVC: 9
5262514-002: RNCC: 7 | RNVC: 2

17 Sep 1983

5975-01-164-3737
Electrical Conduit Locknut

011643737
LD482-0049-0002: RNCC: 3 | RNVC: 2

15 Oct 1983

5975-01-164-3738
Electrical Conduit Locknut

011643738
LD482-0049-0003: RNCC: 3 | RNVC: 2

15 Oct 1983

5975-01-167-7952
Flexible Nonmetallic Conduit

011677952
2250210: RNCC: 3 | RNVC: 2
2AN679: RNCC: 5 | RNVC: 9
45A079-P1: RNCC: 5 | RNVC: 9
2250210: RNCC: 5 | RNVC: 9
45A079-P1: RNCC: 5 | RNVC: 9

6 Dec 1983

5975-01-170-2631
Receptacle Dust Cover

011702631
BLRCW19: RNCC: 3 | RNVC: 9
GC860HA19CW: RNCC: 5 | RNVC: 2
BLRCW-19: RNCC: 5 | RNVC: 9

22 Jan 1984

5975-01-174-3568
Electrical Conduit Coupling

011743568
5050S: RNCC: 3 | RNVC: 2
TK-121: RNCC: 5 | RNVC: 2
TWC50-S: RNCC: 5 | RNVC: 9
5030: RNCC: 5 | RNVC: 9

16 Mar 1984

5975-01-173-9591
Junction Box

011739591
A1614NFAL: RNCC: 3 | RNVC: 2
AB-16146JCA: RNCC: 5 | RNVC: 2

13 Mar 1984

5975-01-175-0930
Blank Panel

011750930
N111-T3: RNCC: 3 | RNVC: 2
806314 PIECE 309: RNCC: 5 | RNVC: 2

27 Mar 1984

5975-01-195-8078
Junction Box

011958078
74D111251-2053: RNCC: 3 | RNVC: 2

4 Dec 1984

5975-01-196-7580
Electrical Components Tie Down Strap

011967580
TYZ-23M: RNCC: 3 | RNVC: 2
E450562P: RNCC: 5 | RNVC: 2
PLT1M-M76: RNCC: 5 | RNVC: 2
T255-230: RNCC: 5 | RNVC: 2
Z00.N7765110275: RNCC: 5 | RNVC: 9
TYZ-23M: RNCC: 5 | RNVC: 9
13201236-01: RNCC: 5 | RNVC: 9
T255-230: RNCC: 5 | RNVC: 9
EE422-23: RNCC: 7 | RNVC: 2
TYZ-23M: RNCC: C | RNVC: 1

14 Dec 1984

5975-01-197-8398
Electrical Conduit Coupling Nut

011978398
3-87334: RNCC: 3 | RNVC: 2

29 Dec 1984

5975-01-198-9747
Electrical Conduit Ferrule

011989747
65610-02050-104: RNCC: 3 | RNVC: 2

16 Jan 1985

5975-01-205-3607
Junction Box

012053607
A1008CHNFSS: RNCC: 3 | RNVC: 2
C6520-1: RNCC: 5 | RNVC: 1
1414N4PHSSILP: RNCC: 5 | RNVC: 2
AB-1084JHFX: RNCC: 5 | RNVC: 2
E-1008CHNFSS: RNCC: 5 | RNVC: 9
B-1084CHSS: RNCC: 5 | RNVC: 9
1414N4-PHSSILP: RNCC: 5 | RNVC: 9
7P-43100-16: RNCC: C | RNVC: 1

7 Apr 1985

5975-01-225-0460
Electrical-Electronic Equipment Panel

012250460
72-5002: RNCC: 3 | RNVC: 2

26 Jan 1986

5975-01-227-5543
Electrical-Electronic Equipment Chassis

012275543
9311474: RNCC: 3 | RNVC: 2

5 Mar 1986

5975-01-230-5835
Electrical Conduit Adapter

012305835
11831204-2: RNCC: 3 | RNVC: 2
3454-140-55: RNCC: 5 | RNVC: 2
201M914-19B: RNCC: 5 | RNVC: 9

16 Apr 1986

5975-01-231-7445
Electrical Box Connector

012317445
TMC6206: RNCC: 3 | RNVC: 2
TMC6206: RNCC: 3 | RNVC: 9
CGF64: RNCC: 5 | RNVC: 9

3 May 1986

5975-01-231-9549
Conduit Outlet Cover

012319549
4B60037-101A: RNCC: 3 | RNVC: 2
4B60037-101A: RNCC: 5 | RNVC: 2

7 May 1986

5975-01-232-4231
Cable Terminal Chamber

012324231
1222149-2: RNCC: 3 | RNVC: 2
1222149-2: RNCC: 3 | RNVC: 9

13 May 1986

5975-01-236-3283
Electrical Nonmetallic Conduit Assembly

012363283
G134189-1: RNCC: 3 | RNVC: 9
G134189-1: RNCC: 5 | RNVC: 9
G134189-1: RNCC: 5 | RNVC: 9

16 Jul 1986

5975-01-236-9813
Splice Kit

012369813
D-150-0124: RNCC: 3 | RNVC: 2

24 Jul 1986

5975-01-234-0985
Conduit Outlet Cover

012340985
SP41-G: RNCC: 3 | RNVC: 2
18-308-023: RNCC: 5 | RNVC: 9

7 Jun 1986

5975-01-237-1081
Cable Hanger

012371081
B4170: RNCC: 3 | RNVC: 2
B4170: RNCC: 5 | RNVC: 2
78B4170: RNCC: 5 | RNVC: 2
60B4278: RNCC: 5 | RNVC: 9
60B4278: RNCC: 5 | RNVC: 9
5975PL0801058: RNCC: 6 | RNVC: 9

24 Jul 1986

Load More Results