What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 108 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 108of 491

5975-01-110-3600
Electrical Grounding Plate

011103600
3365505-1: RNCC: 3 | RNVC: 2
3365505-1: RNCC: 3 | RNVC: 2
3365505-1: RNCC: 5 | RNVC: 2
3365505-1: RNCC: 5 | RNVC: 9
5975PL0802195: RNCC: 6 | RNVC: 9

29 Mar 1981

5975-01-112-6605
Rigid Metal Conduit Assembly

011126605
4B69142-127A: RNCC: 3 | RNVC: 2

8 May 1981

5975-01-113-1511
Electrical Wall Plate

011131511
12297857: RNCC: 3 | RNVC: 2

16 May 1981

5975-01-114-7435
Electrical Cable Protector

011147435
12299743: RNCC: 3 | RNVC: 2
10087272: RNCC: 6 | RNVC: 9

22 Jun 1981

5975-01-115-5895
Electrical Bonding Ring

011155895
31-90141: RNCC: 3 | RNVC: 2
573427-1: RNCC: 5 | RNVC: 9

10 Jul 1981

5975-01-116-8979
Rigid Metal Conduit Assembly

011168979
4B69142-121A: RNCC: 3 | RNVC: 2

5 Aug 1981

5975-01-120-1084
Cable Spacer

011201084
2589710-2: RNCC: 3 | RNVC: 2

11 Oct 1981

5975-01-121-0743
Control Box

011210743
81245: RNCC: 3 | RNVC: 2
81245: RNCC: 5 | RNVC: 9
81245: RNCC: 5 | RNVC: 9

30 Oct 1981

5975-01-122-2463
Rigid Metal Conduit Assembly

011222463
4B69142-113A: RNCC: 3 | RNVC: 2
4B69142-113A: RNCC: 5 | RNVC: 2
4B69142-113A: RNCC: 5 | RNVC: 2
4B69142-113A: RNCC: 5 | RNVC: 2

18 Nov 1981

5975-01-126-7508
Electrical Conduit Adapter

011267508
12311887-37: RNCC: 1 | RNVC: 2
TXR40AB00-1206: RNCC: 3 | RNVC: 2
S2905S6706LNS034-000: RNCC: 3 | RNVC: 2
BA40AB00-1206A: RNCC: 5 | RNVC: 9

17 Feb 1982

5975-01-130-2581
Junction Box Cover

011302581
65560-05125-102: RNCC: 1 | RNVC: 2
B1289-102: RNCC: 3 | RNVC: 2

19 Apr 1982

5975-01-132-3416
Rigid Metal Conduit Assembly

011323416
26-370-0850: RNCC: 3 | RNVC: 2
26-370-0850: RNCC: 5 | RNVC: 9

26 May 1982

5975-01-134-8439
Electrical Components Tie Down Strap

011348439
4019567-2: RNCC: 3 | RNVC: 2

11 Jul 1982

5975-01-137-6211
Strap Mount

011376211
SMS-A-C15: RNCC: 3 | RNVC: 2

1 Sep 1982

5975-01-148-7259
Electrical Components Tie Down Strap

011487259
33337: RNCC: 3 | RNVC: 2
33337-2: RNCC: 5 | RNVC: 9

9 Mar 1983

5975-01-151-3439
Electrical Components Tie Down Strap

011513439
TY635MX: RNCC: 3 | RNVC: 2
10134333: RNCC: 6 | RNVC: 9

16 Apr 1983

5975-01-155-7500
Electrical-Electronic Equipment Chassis

011557500
73-25189-002: RNCC: 3 | RNVC: 2
PTC2145121B-R: RNCC: 5 | RNVC: 2

15 Jun 1983

5975-01-156-0650
Blank Panel

011560650
A12N10P: RNCC: 3 | RNVC: 2
A12N10P: RNCC: 5 | RNVC: 9

18 Jun 1983

5975-01-157-0693
Electrical Components Tie Down Strap

011570693
RT350: RNCC: 3 | RNVC: 2

29 Jun 1983

5975-01-178-4507
Stuffing Tube Packing Nut

011784507
M24235/9-064: RNCC: 2 | RNVC: 2
MIL-S-24235/9: RNCC: 4 | RNVC: 1

5 May 1984

5975-01-176-9699
Stuffing Tube

011769699
034-07627-000: RNCC: 3 | RNVC: 2
34-7627-000: RNCC: 3 | RNVC: 9
34-7627-000: RNCC: 5 | RNVC: 2
34-C-7627: RNCC: 5 | RNVC: 9
34-7627: RNCC: 5 | RNVC: 9

18 Apr 1984

5975-01-183-5060
Ckt Bkr Assy Panel

011835060
880408-T1: RNCC: 3 | RNVC: 1
806292 PC325: RNCC: 5 | RNVC: 1
N65-T1: RNCC: 5 | RNVC: 1
806292: RNCC: 5 | RNVC: 1

7 Jul 1984

5975-01-185-3693
Junction Box

011853693
M24142/3-001: RNCC: 2 | RNVC: 2
MIL-E-24142/3: RNCC: 4 | RNVC: 1
ENC6X9: RNCC: 5 | RNVC: 1
M24142-3-001: RNCC: 5 | RNVC: 9

27 Jul 1984

5975-01-185-3642
Electrical Cable Nipple

011853642
7000.022.13: RNCC: 3 | RNVC: 2
5M2166-001: RNCC: 5 | RNVC: 2
7000.022.13: RNCC: 5 | RNVC: 2

27 Jul 1984

5975-01-185-3694
Junction Box

011853694
AB-14126JHA: RNCC: 3 | RNVC: 2
A1412CHAL: RNCC: 3 | RNVC: 2

27 Jul 1984

5975-01-183-5359
Electrical Cable Support

011835359
N31-A: RNCC: 3 | RNVC: 1
806292 PC314: RNCC: 5 | RNVC: 1
880380-A: RNCC: 5 | RNVC: 1
806292: RNCC: 5 | RNVC: 1

7 Jul 1984

5975-01-194-3419
Cable Hanger

011943419
9365602: RNCC: 3 | RNVC: 2
26591-4: RNCC: 5 | RNVC: 9

13 Nov 1984

5975-01-163-1099
Cable Marker Sleeve

011631099
RS7074-1706: RNCC: 3 | RNVC: 2
SS7074: RNCC: 3 | RNVC: 2
SS7074-1706: RNCC: 5 | RNVC: 2

28 Sep 1983

5975-01-164-1157
Conduit Outlet

011641157
GUAX14: RNCC: 3 | RNVC: 2

12 Oct 1983

5975-01-170-4826
Electrical Conduit Ferrule

011704826
112111: RNCC: 3 | RNVC: 2
112111: RNCC: 5 | RNVC: 9

25 Jan 1984

5975-01-170-4947
Junction Box Cover

011704947
10937841-1: RNCC: 3 | RNVC: 2

25 Jan 1984

5975-01-170-7836
Blank Panel

011707836
9M381B12E: RNCC: 3 | RNVC: 2

29 Jan 1984

5975-01-171-9266
Electrical Equipment Drawer

011719266
82936A: RNCC: 3 | RNVC: 9
HP82936A: RNCC: 5 | RNVC: 9
82936A: RNCC: 5 | RNVC: 9
82936A: RNCC: C | RNVC: 1

15 Feb 1984

5975-01-172-0435
Box Assembly

011720435
518-4863898 ITEM 1: RNCC: 3 | RNVC: 2

15 Feb 1984

5975-01-171-9118
Electrical-Electronic Equipment Panel

011719118
406-075-138-101: RNCC: 3 | RNVC: 2

15 Feb 1984

5975-01-173-8789
Blank Panel

011738789
A20P16SS6: RNCC: 3 | RNVC: 2
A-20P16SS: RNCC: 5 | RNVC: 9

10 Mar 1984

5975-01-173-9592
Junction Box

011739592
LT11-33: RNCC: 3 | RNVC: 2

13 Mar 1984

5975-01-175-1211
Mounting Assembly-Electrical Equipment

011751211
16F0265-41: RNCC: 3 | RNVC: 2

27 Mar 1984

5975-01-175-2057
Insulator

011752057
3604-16-7: RNCC: 3 | RNVC: 2

28 Mar 1984

5975-01-176-6870
Electrical Box Connector

011766870
91701168N: RNCC: 3 | RNVC: 2
91701168: RNCC: 3 | RNVC: 9
91701168: RNCC: C | RNVC: 1

15 Apr 1984

5975-01-195-5654
Electrical Cable Nipple

011955654
151-084: RNCC: 3 | RNVC: 2
10524535: RNCC: 5 | RNVC: 1
2CD379: RNCC: 5 | RNVC: 2
2CD379: RNCC: 5 | RNVC: 9

30 Nov 1984

5975-01-199-4484
Blank Panel

011994484
A6P6SS: RNCC: 3 | RNVC: 2

22 Jan 1985

5975-01-201-1488
Junction Box

012011488
4B60033-107A: RNCC: 3 | RNVC: 2

13 Feb 1985

5975-01-200-6048
Electrical Box Connector

012006048
429R413H02: RNCC: 3 | RNVC: 2

7 Feb 1985

5975-01-202-4426
Junction Box

012024426
A1008CHAL: RNCC: 3 | RNVC: 2
AB1084JHA: RNCC: 3 | RNVC: 2
A1008CHAL: RNCC: 5 | RNVC: 9

2 Mar 1985

5975-01-204-2744
Junction Box

012042744
M24142/6-008: RNCC: 2 | RNVC: 2
MIL-E-24142/6: RNCC: 4 | RNVC: 1

24 Mar 1985

5975-01-208-1529
Stuffing Tube

012081529
CT0741-01: RNCC: 3 | RNVC: 2
P207-0001: RNCC: 3 | RNVC: 2
LE482-0027-0001: RNCC: 5 | RNVC: 1

10 May 1985

5975-01-208-9618
Electrical Cable Nipple

012089618
12339710: RNCC: 3 | RNVC: 2
12339710: RNCC: 3 | RNVC: 2
12339710: RNCC: 5 | RNVC: 1
5582481: RNCC: 5 | RNVC: 9
12339710: RNCC: 5 | RNVC: 9
5975PL0715610: RNCC: 6 | RNVC: 9

21 May 1985

5975-01-211-4394
Electrical Nonmetallic Conduit Assembly

012114394
R58HB33B34A012: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 9

26 Jun 1985

5975-01-229-2839
Electrical Box Connector

012292839
STA-6: RNCC: 3 | RNVC: 9
STA-6: RNCC: 5 | RNVC: 2

29 Mar 1986

5975-01-229-2854
Rigid Nonmetallic Conduit

012292854
49412: RNCC: 3 | RNVC: 9
A53CE12: RNCC: 5 | RNVC: 2

29 Mar 1986

5975-01-236-9806
Electronic Junction Rack

012369806
CTJ-3A-03: RNCC: 3 | RNVC: 2
CTJ-3A-03: RNCC: 5 | RNVC: 2

24 Jul 1986

5975-01-238-9556
Adapter

012389556
019900-4001: RNCC: 3 | RNVC: 2
6166881: RNCC: 5 | RNVC: 1
6166881: RNCC: 5 | RNVC: 1
6166881: RNCC: D | RNVC: 9

23 Aug 1986

5975-01-244-3514
Electrical Conduit Union

012443514
300-5940907/PC9: RNCC: 3 | RNVC: 1
2 1/2 IN. UNION: RNCC: 5 | RNVC: 1

11 Nov 1986

5975-01-247-3622
Electrical Components Tie Down Strap

012473622
RT50R: RNCC: 3 | RNVC: 2
86-1345411-1: RNCC: 5 | RNVC: 9
86-1345411-1: RNCC: 7 | RNVC: 2

3 Jan 1987

5975-01-247-4626
Blank Panel

012474626
HNM-4BL: RNCC: 3 | RNVC: 2
HNM-4BL: RNCC: 5 | RNVC: 9

6 Jan 1987

5975-01-247-4791
Adapter Universal

012474791
13227E6201: RNCC: 3 | RNVC: 2

7 Jan 1987

5975-01-247-7734
Blank Panel

012477734
74A802615-1019: RNCC: 3 | RNVC: 9
74A802615-1019: RNCC: 5 | RNVC: 9
10154468: RNCC: 6 | RNVC: 9
74A802615-1019: RNCC: C | RNVC: 1

12 Jan 1987

5975-01-252-3611
Cable Hanger

012523611
2083: RNCC: 3 | RNVC: 2

1 Apr 1987

5975-01-253-6061
Electrical Conduit Locknut

012536061
1664C12H01: RNCC: 3 | RNVC: 2

22 Apr 1987

5975-01-252-8017
Blank Panel

012528017
27169500: RNCC: 3 | RNVC: 2
27169500: RNCC: 3 | RNVC: 9

8 Apr 1987

5975-01-255-7657
Electrical Conduit Adapter

012557657
11831204-1: RNCC: 3 | RNVC: 2

25 May 1987

5975-01-256-4541
Electronic Junction Rack

012564541
CTJ3A04: RNCC: 3 | RNVC: 2
SJT504404: RNCC: 5 | RNVC: 9
FE417-0108-0003: RNCC: 7 | RNVC: 2

5 Jun 1987

5975-01-256-4542
Electronic Junction Rack

012564542
CTJ-3A-12: RNCC: 3 | RNVC: 2
FE417-0108-0020: RNCC: 7 | RNVC: 2

5 Jun 1987

5975-01-257-3107
Electronic Junction Rack

012573107
TJT-701002: RNCC: 3 | RNVC: 2
TJT701002: RNCC: 5 | RNVC: 2
421501-032: RNCC: 5 | RNVC: 9
000-8008-438: RNCC: 5 | RNVC: 9

17 Jun 1987

5975-01-217-1198
Electrical Conduit Locknut

012171198
9384724: RNCC: 1 | RNVC: 2
142: RNCC: 3 | RNVC: 2
152: RNCC: 5 | RNVC: 9
111K1904: RNCC: C | RNVC: 1

21 Sep 1985

5975-01-219-0889
Junction Box

012190889
A1212CHNF: RNCC: 3 | RNVC: 2
1455760: RNCC: 5 | RNVC: 2
1455760: RNCC: 5 | RNVC: 9

21 Oct 1985

5975-01-220-1420
Junction Box

012201420
65560-03150-059: RNCC: 3 | RNVC: 2

9 Nov 1985

5975-01-222-7522
Junction Box

012227522
800H-4HZ4: RNCC: 3 | RNVC: 2

16 Dec 1985

5975-01-258-6234
Electrical Nonmetallic Conduit Assembly

012586234
R58HB06E45W010: RNCC: 3 | RNVC: 1
R58HB06E45W010: RNCC: 3 | RNVC: 2
R58HB06E45W010: RNCC: 5 | RNVC: 1
R58HB06E45W010: RNCC: 7 | RNVC: 9

5 Jul 1987

5975-01-258-7076
Conduit Outlet Cover

012587076
10252900-1: RNCC: 3 | RNVC: 2
10252900-1: RNCC: 5 | RNVC: 1

7 Jul 1987

5975-01-258-8684
Cable Hanger

012588684
9396140: RNCC: 3 | RNVC: 2

9 Jul 1987

5975-01-260-7109
Cable Hanger

012607109
70209-74007-102: RNCC: 3 | RNVC: 2
70209-74007: RNCC: 5 | RNVC: 1

4 Aug 1987

5975-01-260-7966
Electrical Conduit Adapter

012607966
S2182F1837-1-12C: RNCC: 3 | RNVC: 2
GA801HL19F12CA: RNCC: 7 | RNVC: 2

5 Aug 1987

5975-01-262-8520
Electrical Bonding Ring

012628520
719-4CR: RNCC: 3 | RNVC: 2
5340-051-0001: RNCC: 7 | RNVC: 2

4 Sep 1987

5975-01-263-3618
Electrical Wall Plate

012633618
G-3027AE: RNCC: 3 | RNVC: 2
3046A: RNCC: 5 | RNVC: 9

13 Sep 1987

5975-01-264-6654
Electrical Equipment Mounting Base

012646654
2B44-BB-34-10: RNCC: 3 | RNVC: 2

5 Oct 1987

5975-01-265-5117
Flexible Metal Conduit Assembly

012655117
5122605-029-101: RNCC: 3 | RNVC: 2

15 Oct 1987

5975-01-265-6900
Electrical Components Tie Down Strap

012656900
PLT3S-C: RNCC: 3 | RNVC: 2
PLT3S: RNCC: 5 | RNVC: 9
18537-2: RNCC: 5 | RNVC: 9

17 Oct 1987

5975-01-268-0440
Electrical Cable Nipple

012680440
202D163-25: RNCC: 3 | RNVC: 2

21 Nov 1987

5975-01-271-2316
Electrical Entrance Cap Shell

012712316
3357-9225: RNCC: 3 | RNVC: 2
3357-9225: RNCC: 3 | RNVC: 9
3522 500 47604: RNCC: 5 | RNVC: 2

22 Jan 1988

5975-01-274-0220
Electrical Tie Down Mounting Base

012740220
ABM2S-A: RNCC: 3 | RNVC: 2
91525209: RNCC: 5 | RNVC: 2
13943737-0: RNCC: 5 | RNVC: 2
1047080HC: RNCC: 5 | RNVC: 2
ABM2S-A: RNCC: 5 | RNVC: 2
12H4785: RNCC: 5 | RNVC: 2
8921895904: RNCC: 5 | RNVC: 2
G1-30-9063-001: RNCC: 7 | RNVC: 2
152201086: RNCC: C | RNVC: 1

4 Mar 1988

5975-01-275-8335
Electrical Nonmetallic Conduit Assembly

012758335
R58HA10D36A008: RNCC: 3 | RNVC: 2
R58HA1036A008: RNCC: 5 | RNVC: 9
R58HA1036A008: RNCC: 5 | RNVC: 9

27 Mar 1988

5975-01-275-9682
Blank Panel

012759682
A10P8: RNCC: 3 | RNVC: 2
619615-5: RNCC: 3 | RNVC: 2
A10P8: RNCC: 5 | RNVC: 2

30 Mar 1988

5975-01-277-5661
Electrical Bonding Ring

012775661
13228E6111: RNCC: 3 | RNVC: 2
BS.2318.00.00.080: RNCC: 5 | RNVC: 9

22 Apr 1988

5975-01-279-7597
Cable Strain Relief Bushing

012797597
040-2531: RNCC: 3 | RNVC: 2

25 May 1988

5975-01-280-3556
Electrical Conduit Locknut

012803556
040-142: RNCC: 3 | RNVC: 2
5054520-16: RNCC: 5 | RNVC: 9
5054520: RNCC: 5 | RNVC: 9

8 Jun 1988

5975-01-281-5268
Electrical Components Tie Down Strap

012815268
RT-350Z: RNCC: 3 | RNVC: 2
PLT1M-C76: RNCC: 5 | RNVC: 1
PLT1M-M76: RNCC: 5 | RNVC: 2
ASC1366932: RNCC: 5 | RNVC: 9
11200180-1: RNCC: 7 | RNVC: 2

25 Jun 1988

5975-01-124-4269
Interconnecting Box

011244269
SE625A4-60: RNCC: 3 | RNVC: 9
S-625A-60: RNCC: 5 | RNVC: 1
CAC625A-60: RNCC: 5 | RNVC: 1
A0248230: RNCC: 5 | RNVC: 9
NE-625QA4: RNCC: 5 | RNVC: 9
SE-625A4-60: RNCC: 5 | RNVC: 9

5 Jan 1982

5975-01-135-5954
Ground Rod

011355954
635837: RNCC: 3 | RNVC: 2
6253SGLW: RNCC: 5 | RNVC: 9
6253SGLW-10M: RNCC: 5 | RNVC: 9

27 Jul 1982

5975-01-139-3474
Cable Retainer

011393474
8126624: RNCC: 3 | RNVC: 9

29 Sep 1982

5975-01-123-4562
Rigid Metal Conduit

011234562
11677706: RNCC: 3 | RNVC: 2

12 Dec 1981

5975-01-192-2907
Junction Box

011922907
A606CHAL: RNCC: 3 | RNVC: 2
AB-664JHA: RNCC: 5 | RNVC: 2
B-664CHAL: RNCC: 5 | RNVC: 9

19 Oct 1984

5975-01-194-1237
Cable Hanger

011941237
11464191: RNCC: 3 | RNVC: 2
11464191: RNCC: 5 | RNVC: 1

10 Nov 1984

5975-01-208-8443
Electrical Grounding Plate

012088443
93855-02: RNCC: 3 | RNVC: 2
53088-01: RNCC: 5 | RNVC: 2

21 May 1985

5975-01-248-4418
Junction Box

012484418
4695775-0001: RNCC: 3 | RNVC: 2

23 Jan 1987

5975-01-258-8238
Electrical Nonmetallic Conduit Assembly

012588238
R58HB51H59A006: RNCC: 3 | RNVC: 2
R58HB51H59A006: RNCC: 5 | RNVC: 2
R58HB51H59A006: RNCC: 5 | RNVC: 9

8 Jul 1987

5975-01-074-3081
Junction Box

010743081
242: RNCC: 3 | RNVC: 2
4-SDW-LC: RNCC: 5 | RNVC: 2

29 Mar 1979

5975-01-075-0569
Electrical Box

010750569
4B69121-111A: RNCC: 3 | RNVC: 2

12 Apr 1979

5975-01-075-5406
Conduit Outlet Cover

010755406
GUA06: RNCC: 3 | RNVC: 2

23 Apr 1979

5975-01-082-5363
Conduit Outlet

010825363
LR39: RNCC: 3 | RNVC: 2
LR100-A: RNCC: 3 | RNVC: 2
LR39: RNCC: 5 | RNVC: 1
LR-100A: RNCC: 5 | RNVC: 9
019-5044-060: RNCC: C | RNVC: 1

5 Sep 1979

5975-01-082-3204
Blank Panel

010823204
12682B: RNCC: 3 | RNVC: 2
068-002159-003: RNCC: 7 | RNVC: 2

31 Aug 1979

5975-01-079-4442
Conduit Outlet

010794442
FD1019: RNCC: 3 | RNVC: 2
FD-1-50L: RNCC: 5 | RNVC: 2
FD1019: RNCC: 5 | RNVC: 9

6 Jul 1979

5975-01-079-4088
Box Junction Cover

010794088
4B69121-121A: RNCC: 3 | RNVC: 2

5 Jul 1979

5975-01-083-5738
Electrical Cable Nipple

010835738
12273147-230: RNCC: 1 | RNVC: 2
202F221-50-0: RNCC: 3 | RNVC: 2
313F332-8: RNCC: 5 | RNVC: 2
313F332-8: RNCC: 5 | RNVC: 9
313F332-8: RNCC: 5 | RNVC: 9
202F221-50: RNCC: 5 | RNVC: 9

26 Sep 1979

5975-01-084-2093
Stand-Off Bushing

010842093
5205933-3: RNCC: 3 | RNVC: 2
3005-479: RNCC: 5 | RNVC: 2
205933-3: RNCC: 5 | RNVC: 9

12 Oct 1979

5975-01-091-6264
Clamp

010916264
10250945-9: RNCC: 3 | RNVC: 2
10250945-9: RNCC: 5 | RNVC: 2
10250945-9: RNCC: 5 | RNVC: 2
10250945-9: RNCC: 5 | RNVC: 2

11 Mar 1980

5975-01-097-2101
Electrical Components Tie Down Strap

010972101
PLC4S-S10-C: RNCC: 3 | RNVC: 2
SSC4S-S10-C: RNCC: 5 | RNVC: 9

7 Jul 1980

5975-01-101-4189
Cover Assembly

011014189
70550-02131-042: RNCC: 3 | RNVC: 2

29 Sep 1980

5975-01-101-5324
Electrical Tie Down Mounting Base

011015324
LPMM-S2-C: RNCC: 3 | RNVC: 2
533539-3: RNCC: 3 | RNVC: 2
LPMM-S2: RNCC: 5 | RNVC: 2
107156-01: RNCC: 5 | RNVC: 9
10124229: RNCC: 6 | RNVC: 9
533539: RNCC: 7 | RNVC: 2
12917769: RNCC: 7 | RNVC: 2
GB0239CR: RNCC: D | RNVC: 9

2 Oct 1980

5975-01-102-1589
Electrical Tie Down Mounting Base

011021589
TC-5828: RNCC: 3 | RNVC: 2
4049-0057: RNCC: 7 | RNVC: 2

12 Oct 1980

5975-01-104-4863
Electrical Box Connector

011044863
DB-614: RNCC: 3 | RNVC: 2
327767-7: RNCC: 5 | RNVC: 9
DB-614-L: RNCC: 5 | RNVC: 9
CG-1275: RNCC: 5 | RNVC: 9
327767-7: RNCC: 7 | RNVC: 2
CG-1275: RNCC: C | RNVC: 1

5 Dec 1980

5975-01-109-6411
Electrical Equipment Mounting Base

011096411
S1660-60036-001: RNCC: 3 | RNVC: 2
S1660-60036-1: RNCC: 5 | RNVC: 1

19 Mar 1981

5975-01-101-5348
Electrical Components Tie Down Strap

011015348
696-40381-1: RNCC: 3 | RNVC: 1
08403: RNCC: 3 | RNVC: 2
PLT4H-TL30: RNCC: 3 | RNVC: 2
T120RHS: RNCC: 3 | RNVC: 2
ST9M559-3: RNCC: 5 | RNVC: 1
PLT4H-C30: RNCC: 5 | RNVC: 9
10134323: RNCC: 6 | RNVC: 9

2 Oct 1980

5975-01-108-5183
Electrical Grounding Plate

011085183
12299172: RNCC: 3 | RNVC: 2

1 Mar 1981

5975-01-114-7661
Electrical Conduit Coupling

011147661
11663099: RNCC: 1 | RNVC: 2
TC-612: RNCC: 3 | RNVC: 2
TC-612: RNCC: 5 | RNVC: 9
TC-612: RNCC: C | RNVC: 1

22 Jun 1981

5975-01-115-3877
Cable Hanger Support Bracket

011153877
372256: RNCC: 3 | RNVC: 2
372256: RNCC: 5 | RNVC: 9

4 Jul 1981

5975-01-115-3001
Electrical Box Connector

011153001
5234AL: RNCC: 3 | RNVC: 2
ST-100AL: RNCC: 5 | RNVC: 2
02320-1755: RNCC: 5 | RNVC: 9
02320-1755: RNCC: 7 | RNVC: 2

2 Jul 1981

5975-01-118-2880
Electrical Conduit Adapter

011182880
12311887: RNCC: 1 | RNVC: 2
TXR40AB00-2416AI: RNCC: 3 | RNVC: 2
S2905A7716AIS034-000: RNCC: 5 | RNVC: 2
12311887-31: RNCC: 5 | RNVC: 9

31 Aug 1981

5975-01-119-8454
Blank Panel

011198454
A16P12: RNCC: 3 | RNVC: 2

6 Oct 1981

5975-01-118-8582
Electrical Conduit Ferrule

011188582
GR2126-5: RNCC: 3 | RNVC: 1
GR2126-EM05: RNCC: 3 | RNVC: 2

12 Sep 1981

5975-01-120-9810
Interconnecting Box

011209810
12311942: RNCC: 3 | RNVC: 2

28 Oct 1981

5975-01-122-0559
Cable Marker Sleeve

011220559
SS7026-2156: RNCC: 3 | RNVC: 2

13 Nov 1981

5975-01-137-7623
Switch Terminal Cover

011377623
102A993-3-42-8: RNCC: 3 | RNVC: 2
102A993-3-42: RNCC: 5 | RNVC: 9
5975PL0929601: RNCC: 6 | RNVC: 9

2 Sep 1982

5975-01-139-3400
Cable Marker Sleeve

011393400
215511T90: RNCC: 3 | RNVC: 2
215511T90: RNCC: 3 | RNVC: 2
TMS-SCE-1/4-2.0-9: RNCC: 5 | RNVC: 1
RNF-100-1/4X2 WHITE: RNCC: 5 | RNVC: 9
215511T90: RNCC: 7 | RNVC: 2

29 Sep 1982

5975-01-140-9064
Blank Panel

011409064
12681B: RNCC: 3 | RNVC: 2
068-002159-002: RNCC: 7 | RNVC: 2

20 Oct 1982

5975-01-142-9737
Electrical Conduit Bend

011429737
ANSI/UL797: RNCC: 3 | RNVC: 1
12267097: RNCC: 3 | RNVC: 2

23 Nov 1982

5975-01-145-6769
Electronic Junction Rack

011456769
M81714-10-1: RNCC: 2 | RNVC: 2
MIL-T-81714/10: RNCC: 4 | RNVC: 1
TJT702002: RNCC: 5 | RNVC: 2

15 Jan 1983

5975-01-147-4781
Socket

011474781
8501NR52: RNCC: 3 | RNVC: 9
8501NR-5: RNCC: 5 | RNVC: 9

17 Feb 1983

5975-01-150-3121
Conduit Outlet

011503121
5390-0: RNCC: 3 | RNVC: 2
66932AX: RNCC: 3 | RNVC: 2
66932AX: RNCC: 5 | RNVC: 9
894-7L: RNCC: 5 | RNVC: 9

4 Apr 1983

5975-01-151-5823
Electrical Conduit Bend

011515823
12267096: RNCC: 3 | RNVC: 2

19 Apr 1983

5975-01-153-1927
Junction Box Cover

011531927
287510: RNCC: 3 | RNVC: 2

13 May 1983

5975-01-157-9432
Rack Electrical Adapter Kit

011579432
5061-0072: RNCC: 3 | RNVC: 2

13 Jul 1983

5975-01-178-9034
Blank Panel

011789034
A12P10AL: RNCC: 3 | RNVC: 2

11 May 1984

5975-01-180-0072
Electrical Conduit Coupling Nut

011800072
S1741B-3-3: RNCC: 3 | RNVC: 2
10134291: RNCC: 6 | RNVC: 9
S1741A-3-3: RNCC: E | RNVC: 8

23 May 1984

5975-01-183-5057
Door Pos Device

011835057
824991-T1: RNCC: 3 | RNVC: 1
824991T1: RNCC: 3 | RNVC: 2
806292 PC311: RNCC: 5 | RNVC: 1
826292: RNCC: 5 | RNVC: 1

7 Jul 1984

5975-01-183-8797
Electrical Equipment Mounting Base

011838797
G134721-1: RNCC: 3 | RNVC: 2
G134721-1: RNCC: 5 | RNVC: 2
G134721-1: RNCC: 5 | RNVC: 9

11 Jul 1984

5975-01-184-5202
Cable Tie Mount

011845202
FTH-3: RNCC: 3 | RNVC: 9

18 Jul 1984

5975-01-183-7987
Electrical-Electronic Equipment Chassis

011837987
1395AS293: RNCC: 3 | RNVC: 2

10 Jul 1984

5975-01-184-8221
Electrical Box Connector

011848221
4G52483-103A: RNCC: 3 | RNVC: 2

23 Jul 1984

5975-01-186-3493
Flexible Nonmetallic Conduit

011863493
75A791011-2006: RNCC: 3 | RNVC: 2

9 Aug 1984

5975-01-186-9955
Conduit Outlet

011869955
FSCT1: RNCC: 3 | RNVC: 2
FSCT-1-50: RNCC: 3 | RNVC: 2
W-C-586: RNCC: 4 | RNVC: 1
687J837-13: RNCC: C | RNVC: 1

17 Aug 1984

5975-01-191-4814
Electrical Box Connector

011914814
SHC-1023: RNCC: 3 | RNVC: 2
051-01-1023: RNCC: 5 | RNVC: 9
080014: RNCC: 5 | RNVC: 9
12965291-1: RNCC: 7 | RNVC: 2
A3006852-5: RNCC: 7 | RNVC: 2
7909857-04: RNCC: C | RNVC: 1

9 Oct 1984

5975-01-161-4069
Flexible Metal Conduit Assembly

011614069
52045-1: RNCC: 3 | RNVC: 2
52045-1: RNCC: 5 | RNVC: 2
10134270: RNCC: 6 | RNVC: 9

5 Sep 1983

5975-01-163-5975
Blank Panel

011635975
872480-T2: RNCC: 3 | RNVC: 2

5 Oct 1983

5975-01-164-3743
Electrical Conduit Locknut

011643743
LD482-0049-0007: RNCC: 3 | RNVC: 2

15 Oct 1983

5975-01-167-5991
Electrical Components Tie Down Strap

011675991
TY-524MX: RNCC: 3 | RNVC: 2
TY524MX: RNCC: 5 | RNVC: 2
TY-524MX: RNCC: 5 | RNVC: 2
SW25594-3: RNCC: 7 | RNVC: 2

2 Dec 1983

5975-01-168-0471
Metallic Raceway

011680471
12325645: RNCC: 3 | RNVC: 2

10 Dec 1983

5975-01-169-1567
Conduit Outlet

011691567
30212: RNCC: 3 | RNVC: 2
5330-0: RNCC: 5 | RNVC: 2
274-L: RNCC: 5 | RNVC: 9

4 Jan 1984

5975-01-168-6147
Conduit

011686147
39841: RNCC: 3 | RNVC: 2
11686147: RNCC: 3 | RNVC: 2
39841: RNCC: 3 | RNVC: 9
13153897-2: RNCC: 5 | RNVC: 9

20 Dec 1983

5975-01-171-8355
Metallic Raceway

011718355
12325645-1: RNCC: 3 | RNVC: 2
12325644: RNCC: 5 | RNVC: 9

15 Feb 1984

5975-01-173-8787
Blank Panel

011738787
A8P6SS: RNCC: 3 | RNVC: 2

10 Mar 1984

5975-01-175-0931
Blank Panel

011750931
880412-T4: RNCC: 3 | RNVC: 2
N111-T4: RNCC: 5 | RNVC: 9
806314 PIECE 310: RNCC: 5 | RNVC: 9

27 Mar 1984

5975-01-195-7611
Electrical Box Connector

011957611
3202: RNCC: 3 | RNVC: 2

2 Dec 1984

5975-01-195-5844
Electrical Box Connector

011955844
BDSR62: RNCC: 3 | RNVC: 2
073-03-1203: RNCC: 3 | RNVC: 2

30 Nov 1984

5975-01-196-4878
Blank Panel

011964878
7-314200055: RNCC: 3 | RNVC: 2
7-314200055: RNCC: 3 | RNVC: 9

12 Dec 1984

5975-01-197-1664
Electrical Conduit Elbow

011971664
12311080-09: RNCC: 3 | RNVC: 2

18 Dec 1984

5975-01-197-9047
Electrical Conduit Coupling

011979047
FL204-10A: RNCC: 3 | RNVC: 2
BACC42Y10A: RNCC: 3 | RNVC: 2
B207S10DB: RNCC: 5 | RNVC: 2
B207S10A: RNCC: 5 | RNVC: 9

30 Dec 1984

5975-01-198-5908
Electronic Junction Rack

011985908
CTJ-3A-06: RNCC: 3 | RNVC: 2
CTJ-3A-06: RNCC: 5 | RNVC: 9

10 Jan 1985

5975-01-199-4502
Junction Box

011994502
A606NFAL: RNCC: 3 | RNVC: 2

22 Jan 1985

5975-01-199-3186
Electrical Box Connector

011993186
SHC-1034: RNCC: 3 | RNVC: 2
17-3-3682-2: RNCC: 5 | RNVC: 2

20 Jan 1985

5975-01-199-9033
Electrical Conductor Bushing

011999033
ABB-100: RNCC: 3 | RNVC: 2
98-19661: RNCC: 5 | RNVC: 1
ABB-100: RNCC: 5 | RNVC: 9
80-7377-01: RNCC: 7 | RNVC: 1

28 Jan 1985

5975-01-205-3271
Stuffing Tube

012053271
CT0741-02: RNCC: 3 | RNVC: 2
LE482-0027-0002: RNCC: 5 | RNVC: 2

7 Apr 1985

5975-01-207-1706
Electrical Cable Nipple

012071706
12339334: RNCC: 3 | RNVC: 2
5584166: RNCC: 5 | RNVC: 9

28 Apr 1985

5975-01-208-7643
Cable Hanger

012087643
AS23190: RNCC: 3 | RNVC: 1
M23190/1-0: RNCC: 3 | RNVC: 2
M23190/1-0: RNCC: 5 | RNVC: 9
MIL-S-23190/1: RNCC: 5 | RNVC: 9
AS23190: RNCC: 5 | RNVC: 9
M23190/1-0: RNCC: 5 | RNVC: 9

19 May 1985

5975-01-225-6405
Nonmetallic Raceway

012256405
181-12005: RNCC: 3 | RNVC: 2
E1X2LG6: RNCC: 5 | RNVC: 2
G1X2LG6: RNCC: 5 | RNVC: 2
SL-1 IN X 2 IN-G: RNCC: 5 | RNVC: 9
238-0695: RNCC: 7 | RNVC: 2

5 Feb 1986

5975-01-229-1696
Cable Marker Sleeve

012291696
9317987-2: RNCC: 1 | RNVC: 2
TMS-3/16-1.50-9: RNCC: 3 | RNVC: 2
TMS-3/16X1.5: RNCC: 5 | RNVC: 2
HS5189-1181: RNCC: 5 | RNVC: 9
TMS-3/16-1.50: RNCC: 5 | RNVC: 9
HS5189-1181: RNCC: C | RNVC: 1

27 Mar 1986

5975-01-228-7139
Electrical Nonmetallic Conduit Assembly

012287139
R58HB12H40W010: RNCC: 3 | RNVC: 1
012287139-02329: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9

20 Mar 1986

5975-01-231-6650
Electrical Box Connector

012316650
371AL: RNCC: 3 | RNVC: 2

1 May 1986

5975-01-232-0976
Electrical Nonmetallic Conduit Assembly

012320976
CRN2151: RNCC: 3 | RNVC: 2

8 May 1986

5975-01-232-1005
Electronic Junction Rack

012321005
64: RNCC: 3 | RNVC: 2
C-7005934: RNCC: 5 | RNVC: 2
N064: RNCC: 5 | RNVC: 9

8 May 1986

5975-01-235-1611
Electrical Tie Down Mounting Base

012351611
FCPI1-20: RNCC: 3 | RNVC: 2

26 Jun 1986

5975-01-237-0034
Electronic Junction Rack

012370034
CTJ-3A-10: RNCC: 3 | RNVC: 2

24 Jul 1986

5975-01-240-7888
Electrical Cable Nipple

012407888
3327720: RNCC: 3 | RNVC: 2
052-0633-0001: RNCC: 5 | RNVC: 2
3327720: RNCC: 5 | RNVC: 9

19 Sep 1986

5975-01-241-0483
Electrical Conduit Adapter

012410483
7000-718-75K000: RNCC: 3 | RNVC: 1
RP2100-EM06-S: RNCC: 3 | RNVC: 2
302-5563046 ITEM 42: RNCC: 5 | RNVC: 1
RP2100-F06-S: RNCC: 5 | RNVC: 9
RP2100-EM06-S: RNCC: 5 | RNVC: 9
S82100-EM06-S: RNCC: 5 | RNVC: 9
RP2100-G06-S: RNCC: 5 | RNVC: 9
RP2100-EM06-S: RNCC: 5 | RNVC: 9

20 Sep 1986

5975-01-250-7119
Junction Box

012507119
5029327-010-2: RNCC: 3 | RNVC: 2

6 Mar 1987

5975-01-243-9959
Blank Panel

012439959
G436-7: RNCC: 3 | RNVC: 2

5 Nov 1986

5975-01-251-0334
Electrical Cable Nipple

012510334
11442208-2: RNCC: 3 | RNVC: 2
13058-2: RNCC: 5 | RNVC: 9
11442208: RNCC: D | RNVC: 9

11 Mar 1987

5975-01-252-8095
Stuffing Tube

012528095
LE482-0024-0504: RNCC: 3 | RNVC: 2
CT0459-0504: RNCC: 5 | RNVC: 2
900-674-0504: RNCC: 5 | RNVC: 2

8 Apr 1987

5975-01-254-2850
Electrical Equipment Mounting Base

012542850
622-8379-001: RNCC: 3 | RNVC: 2
5975PL1612114: RNCC: 6 | RNVC: 9

5 May 1987

5975-01-255-3910
Electrical Conduit Bushing

012553910
RB100-75: RNCC: 3 | RNVC: 2
RB100-75: RNCC: 5 | RNVC: 9

20 May 1987

5975-01-256-6385
Electrical Components Tie Down Strap

012566385
R44302: RNCC: 3 | RNVC: 2
P44302: RNCC: 5 | RNVC: 9
SST45-C-0: RNCC: 5 | RNVC: 9
T44946: RNCC: 5 | RNVC: 9
R44302: RNCC: 5 | RNVC: 9

7 Jun 1987

5975-01-257-1830
Cable Hanger

012571830
ALC-4: RNCC: 3 | RNVC: 2
5999-018-0001: RNCC: 5 | RNVC: 9
ALC-4: RNCC: 5 | RNVC: 9

13 Jun 1987

5975-01-210-8087
Electrical Nonmetallic Conduit Assembly

012108087
R58HB12E35X012A: RNCC: 3 | RNVC: 1
R58HB12E35X012A: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 9

18 Jun 1985

5975-01-210-4979
Rigid Metal Conduit Assembly

012104979
5904030-5: RNCC: 1 | RNVC: 2
7-1477-5: RNCC: 3 | RNVC: 2
211258-DI0055: RNCC: 3 | RNVC: 2
5904030-5: RNCC: 5 | RNVC: 1

13 Jun 1985

NSN 5975-01-210-7817 012107817 ELBOW,ELECTRICAL CONDUIT

5975-01-210-7817
Electrical Conduit Elbow

012107817
12351693: RNCC: 3 | RNVC: 2
950005: RNCC: 5 | RNVC: 2
12351497: RNCC: 5 | RNVC: 9
51426-103: RNCC: 5 | RNVC: 9
51426-103: RNCC: C | RNVC: 1

18 Jun 1985

5975-01-211-3142
Electrical Conductor Bushing

012113142
SB-750-625-2840: RNCC: 3 | RNVC: 2
5584929: RNCC: 5 | RNVC: 2
9320PL0699215: RNCC: 6 | RNVC: 9

24 Jun 1985

5975-01-214-1355
Flexible Metal Conduit

012141355
750-084-20: RNCC: 3 | RNVC: 2
71350-62-31: RNCC: 3 | RNVC: 2
023700-HP0625: RNCC: 3 | RNVC: 2
SM83-05: RNCC: 5 | RNVC: 9
MHT-62-31-P: RNCC: 5 | RNVC: 9
EM05: RNCC: 7 | RNVC: 2
SM83-05: RNCC: C | RNVC: 1

6 Aug 1985

5975-01-215-7947
Junction Box Cover

012157947
403-C: RNCC: 3 | RNVC: 2
8468C: RNCC: 5 | RNVC: 2
768: RNCC: 5 | RNVC: 2
52C14-5/8: RNCC: 5 | RNVC: 2

31 Aug 1985

5975-01-221-5902
Electrical Equipment Cabinet

012215902
C16C16: RNCC: 3 | RNVC: 2
AB-1616PBC: RNCC: 5 | RNVC: 2

1 Dec 1985

5975-01-259-0720
Nonmetallic Raceway

012590720
E3X2LG6: RNCC: 3 | RNVC: 2

13 Jul 1987

5975-01-260-7960
Electrical Conduit Adapter

012607960
S2182F2262-1-12C: RNCC: 3 | RNVC: 2
GA801HL21F12CC: RNCC: 7 | RNVC: 2

5 Aug 1987

5975-01-261-2436
Electrical Conduit Adapter

012612436
202C305-13: RNCC: 3 | RNVC: 2
202C305: RNCC: 5 | RNVC: 9

11 Aug 1987

5975-01-264-6691
Stuffing Tube

012646691
CGB-297: RNCC: 3 | RNVC: 9
CB90-44001-44: RNCC: 5 | RNVC: 9

5 Oct 1987

5975-01-265-5116
Flexible Metal Conduit Assembly

012655116
5122605-028-101: RNCC: 3 | RNVC: 2

15 Oct 1987

5975-01-267-3136
Junction Box

012673136
518918-1: RNCC: 3 | RNVC: 2

9 Nov 1987

5975-01-267-9869
Electrical Cable Support

012679869
S1741B-3-4: RNCC: 3 | RNVC: 2

21 Nov 1987

5975-01-267-9133
Electrical Tie Down Mounting Base

012679133
TM2A-C: RNCC: 3 | RNVC: 2
TM2A: RNCC: 5 | RNVC: 9
SM-A-839355-2: RNCC: 5 | RNVC: 9
5D0061-11: RNCC: 5 | RNVC: 9

19 Nov 1987

5975-01-268-0571
Cable Hanger

012680571
9M895-1: RNCC: 3 | RNVC: 2
9M895-1: RNCC: 5 | RNVC: 2
9M985-1: RNCC: 5 | RNVC: 9
BC6640-165: RNCC: 5 | RNVC: 9
10134272: RNCC: 6 | RNVC: 9

21 Nov 1987

5975-01-270-5547
Electrical Equipment Shelf

012705547
18-00704-001: RNCC: 3 | RNVC: 2

8 Jan 1988

5975-01-271-5667
Flexible Metal Conduit Assembly

012715667
405-10774-1: RNCC: 3 | RNVC: 2

28 Jan 1988

5975-01-277-4371
Flexible Nonmetallic Conduit

012774371
M3505004: RNCC: 3 | RNVC: 2
849181-1: RNCC: 5 | RNVC: 9
68929-R: RNCC: 5 | RNVC: 9

22 Apr 1988

5975-01-277-4372
Flexible Nonmetallic Conduit

012774372
M3505006: RNCC: 3 | RNVC: 2
849181-2: RNCC: 3 | RNVC: 9
68931-R: RNCC: 5 | RNVC: 9

22 Apr 1988

5975-01-281-7165
Electrical Cable Protector

012817165
42420-273: RNCC: 3 | RNVC: 2
42420-273: RNCC: 5 | RNVC: 9
42420-273: RNCC: 5 | RNVC: 9

29 Jun 1988

5975-01-284-1937
Electrical Tie Down Mounting Base

012841937
TA1S8-M: RNCC: 3 | RNVC: 2
087480: RNCC: 5 | RNVC: 1

19 Aug 1988

5975-01-072-0986
Electrical Wall Plate

010720986
SS2: RNCC: 3 | RNVC: 2
S2: RNCC: 3 | RNVC: 9
93071: RNCC: 5 | RNVC: 9

22 Feb 1979

5975-01-075-0571
Electrical Box

010750571
4B69131-104A: RNCC: 3 | RNVC: 2

12 Apr 1979

5975-01-085-1729
Electrical Conduit Bushing

010851729
53G970384-23: RNCC: 3 | RNVC: 2

1 Nov 1979

5975-01-091-1877
Electrical Equipment Mounting Base

010911877
2041441-0102: RNCC: 3 | RNVC: 2
2041441-0102: RNCC: 5 | RNVC: 2
MT6135/APS133: RNCC: 5 | RNVC: 9
2041441-0102: RNCC: 5 | RNVC: 9

3 Mar 1980

5975-01-085-9013
Electrical Conduit Wye

010859013
J1216-01-8: RNCC: 3 | RNVC: 2
GA800RT5018: RNCC: 7 | RNVC: 2

18 Nov 1979

5975-01-087-9650
Electrical Components Tie Down Strap

010879650
53064-5: RNCC: 3 | RNVC: 2

31 Dec 1979

5975-01-111-0130
Electrical Tie Down Mounting Base

011110130
PBMSH25: RNCC: 3 | RNVC: 2
0312130750: RNCC: 5 | RNVC: 2
PBMS-H25: RNCC: 5 | RNVC: 2
998/4/83942/000: RNCC: 5 | RNVC: 2
505550-1: RNCC: 7 | RNVC: 2

9 Apr 1981

5975-01-112-2151
Oil Return Junction

011122151
5136519: RNCC: 3 | RNVC: 2
PC5136519: RNCC: 5 | RNVC: 9

30 Apr 1981

5975-01-112-6607
Rigid Metal Conduit Assembly

011126607
4B69142-131A: RNCC: 3 | RNVC: 2

8 May 1981

5975-01-112-6611
Rigid Metal Conduit Assembly

011126611
4B69142-111A: RNCC: 3 | RNVC: 2

8 May 1981

5975-01-115-1314
Rigid Metal Conduit Assembly

011151314
4B69142-139A: RNCC: 3 | RNVC: 2

28 Jun 1981

5975-01-116-0285
Electrical Cable Nipple

011160285
12273176-320: RNCC: 1 | RNVC: 2
222F232-51: RNCC: 3 | RNVC: 2
333F343-9: RNCC: 3 | RNVC: 2
333F343-9: RNCC: 5 | RNVC: 9

18 Jul 1981

5975-01-116-5459
Flexible Metal Conduit

011165459
HC3/4IN SIZE: RNCC: 3 | RNVC: 2
AT 12: RNCC: 3 | RNVC: 2
00415-0054: RNCC: 5 | RNVC: 2
AT 1412: RNCC: 5 | RNVC: 9
00415-0054: RNCC: 5 | RNVC: 9

29 Jul 1981

5975-01-117-3266
Electrical Conduit Elbow

011173266
12311902-9: RNCC: 1 | RNVC: 2
202M022-19B: RNCC: 3 | RNVC: 2
10351624: RNCC: 5 | RNVC: 2
X21-572-624: RNCC: 5 | RNVC: 2
10351624: RNCC: 5 | RNVC: 9
X21-572-624: RNCC: 5 | RNVC: 9
10351624: RNCC: 5 | RNVC: 9
X21-572-624: RNCC: 5 | RNVC: 9

13 Aug 1981

5975-01-118-6759
Electrical Conduit Adapter

011186759
RP2440-06-N: RNCC: 3 | RNVC: 2
RP2440-06-N: RNCC: 5 | RNVC: 2
RP2440-06-1: RNCC: 5 | RNVC: 9

9 Sep 1981

5975-01-120-3728
Rigid Metal Conduit

011203728
11677578: RNCC: 3 | RNVC: 2

18 Oct 1981

5975-01-121-0744
Cable Tie

011210744
15385: RNCC: 3 | RNVC: 2
15385: RNCC: 5 | RNVC: 9
15385: RNCC: 5 | RNVC: 9

30 Oct 1981

5975-01-035-5120
Electrical Cable Protector

010355120
30/24: RNCC: 3 | RNVC: 9
M24705: RNCC: 4 | RNVC: 1
30/24: RNCC: 5 | RNVC: 9

11 Feb 1977

5975-01-125-6688
Electrical Box Connector

011256688
CG-5050: RNCC: 3 | RNVC: 2
56646-8: RNCC: 5 | RNVC: 2
13229E6555-2: RNCC: 7 | RNVC: 2

1 Feb 1982

5975-01-127-5988
Fanning Strip

011275988
74A885647-2001: RNCC: 3 | RNVC: 2
74A885647-2001: RNCC: 5 | RNVC: 2

4 Mar 1982

5975-01-130-3163
Interconnecting Box

011303163
65560-05127-041: RNCC: 3 | RNVC: 2

19 Apr 1982

5975-01-131-9485
Electrical Conduit Adapter

011319485
E942J: RNCC: 3 | RNVC: 9
00034481062462: RNCC: 5 | RNVC: 9

19 May 1982

5975-01-131-6300
Cable Hanger

011316300
12308204: RNCC: 1 | RNVC: 2
CL-09-KR: RNCC: 3 | RNVC: 2

13 May 1982

5975-01-133-8441
Cable Hanger

011338441
12307412: RNCC: 3 | RNVC: 2

22 Jun 1982

5975-01-137-5367
Electrical Tie Down Mounting Base

011375367
ABM2S-A-C15: RNCC: 3 | RNVC: 2

28 Aug 1982

5975-01-142-1001
Electrical Operator

011421001
10250T5: RNCC: 3 | RNVC: 9

10 Nov 1982

5975-01-144-9401
Electrical Conduit Coupling

011449401
E940H: RNCC: 3 | RNVC: 9
00034481061052: RNCC: 5 | RNVC: 9

31 Dec 1982

5975-01-142-2927
Electrical Conduit Bend

011422927
ANSI/UL797: RNCC: 3 | RNVC: 1
12267094: RNCC: 3 | RNVC: 2

14 Nov 1982

5975-01-149-1373
Electrical Nonmetallic Conduit Assembly

011491373
4B69143-133A: RNCC: 3 | RNVC: 2

15 Mar 1983

5975-01-151-1750
Electrical Conduit Bend

011511750
59592: RNCC: 3 | RNVC: 2
UA9AH: RNCC: 5 | RNVC: 9
00034481060451: RNCC: 5 | RNVC: 9

14 Apr 1983

5975-01-151-1751
Electrical Conduit Bend

011511751
UA9AJ: RNCC: 3 | RNVC: 9
59593: RNCC: 5 | RNVC: 2
00034481060468: RNCC: 5 | RNVC: 9

14 Apr 1983

5975-01-151-9336
Electrical Box Connector

011519336
073-03-1201: RNCC: 3 | RNVC: 2

25 Apr 1983

5975-01-155-6203
Electrical-Electronic Equipment Chassis

011556203
73-25189-001: RNCC: 3 | RNVC: 2
PTC2145121B-L: RNCC: 5 | RNVC: 2

13 Jun 1983

5975-01-158-4636
Junction Box

011584636
2BD724: RNCC: 3 | RNVC: 2
2BD724: RNCC: 5 | RNVC: 9
45B007-P1: RNCC: 5 | RNVC: 9

23 Jul 1983

5975-01-158-5094
Cable Pressure Pad

011585094
RE-B102121-5: RNCC: 3 | RNVC: 2
RE-B102121-5: RNCC: 5 | RNVC: 2
ASC1540040: RNCC: 5 | RNVC: 9

25 Jul 1983

5975-01-158-5093
Cable Pressure Pad

011585093
RE-B102121-4: RNCC: 3 | RNVC: 2
ASC1539991: RNCC: 5 | RNVC: 9
RE-B102121: RNCC: D | RNVC: 9

25 Jul 1983

5975-01-177-9335
Junction Box Cover

011779335
70550-22130-105: RNCC: 3 | RNVC: 2

29 Apr 1984

5975-01-177-9346
Electrical Cable Nipple

011779346
51-0296-3: RNCC: 3 | RNVC: 2

29 Apr 1984

5975-01-181-5679
Electrical Conduit Adapter

011815679
K15K0017-2DWF1: RNCC: 3 | RNVC: 2
150190: RNCC: 5 | RNVC: 1

12 Jun 1984

5975-01-182-7689
Electrical Conduit Union

011827689
EC-100: RNCC: 3 | RNVC: 2
EC-100: RNCC: 3 | RNVC: 9

27 Jun 1984

5975-01-188-2786
Blank Panel

011882786
806292 PIECE 306: RNCC: 3 | RNVC: 2
N18-T3: RNCC: 5 | RNVC: 2

31 Aug 1984

5975-01-163-1123
Cable Clamp

011631123
FCC-2: RNCC: 3 | RNVC: 2
828-2810222-002: RNCC: 5 | RNVC: 2
788437-1: RNCC: C | RNVC: 1

28 Sep 1983

5975-01-167-3934
Electrical Wall Plate

011673934
224-VAL: RNCC: 3 | RNVC: 2

27 Nov 1983

5975-01-172-8378
Clamp

011728378
WH1X1292: RNCC: 3 | RNVC: 2

25 Feb 1984

5975-01-174-3065
Electrical Equipment Mounting Base

011743065
166763-01: RNCC: 3 | RNVC: 2
94086-1: RNCC: 5 | RNVC: 9
94086-1: RNCC: 5 | RNVC: 9

16 Mar 1984

5975-01-174-0584
Conduit Outlet

011740584
35CB3000: RNCC: 3 | RNVC: 9
35-7500: RNCC: 5 | RNVC: 9
00781568162545: RNCC: 5 | RNVC: 9
00781568162545: RNCC: C | RNVC: 1
35CB3000: RNCC: C | RNVC: 1

14 Mar 1984

5975-01-176-0145
Electrical Cable Nipple

011760145
42HA0603: RNCC: 3 | RNVC: 2

6 Apr 1984

5975-01-176-5579
Conduit Outlet

011765579
LB50-A: RNCC: 3 | RNVC: 2
OLB-1: RNCC: 5 | RNVC: 2
LB-50A: RNCC: 5 | RNVC: 9

13 Apr 1984

5975-01-195-9884
Blank Panel

011959884
BACP10U0150B: RNCC: 3 | RNVC: 2

5 Dec 1984

5975-01-197-1923
Electrical Equipment Mounting Base

011971923
622-4290-002: RNCC: 3 | RNVC: 2

19 Dec 1984

5975-01-198-3811
Flexible Metal Conduit

011983811
600232-4/12: RNCC: 3 | RNVC: 2
600232-4: RNCC: 5 | RNVC: 9
FF-9119: RNCC: 5 | RNVC: 9
5975PL0924600: RNCC: 6 | RNVC: 9
FF-9119 PIECE 3: RNCC: 7 | RNVC: 2

8 Jan 1985

5975-01-201-4108
Rigid Metal Conduit

012014108
6-013-000458: RNCC: 3 | RNVC: 9
2CD604: RNCC: 5 | RNVC: 2
6-013-000458: RNCC: 5 | RNVC: 2
6-013-000458: RNCC: 5 | RNVC: 9
2CD604: RNCC: 5 | RNVC: 9

16 Feb 1985

5975-01-204-2832
Electrical Conduit Ferrule

012042832
72-261: RNCC: 3 | RNVC: 9
E-4159-261: RNCC: 7 | RNVC: 2

24 Mar 1985

5975-01-205-3769
Electrical Components Tie Down Strap

012053769
T18I0M4: RNCC: 3 | RNVC: 2
T18I0C2: RNCC: 3 | RNVC: 2
PLT1.5M-C0: RNCC: 3 | RNVC: 2
7-850-000208: RNCC: 5 | RNVC: 1
7-850-000208: RNCC: 5 | RNVC: 1
PLT1.5M-M0: RNCC: 5 | RNVC: 1
AL06-18-0-C: RNCC: 5 | RNVC: 2
2HA859: RNCC: 5 | RNVC: 2
AL-06-18-0-C: RNCC: 5 | RNVC: 9
2HA859: RNCC: 5 | RNVC: 9

7 Apr 1985

5975-01-206-0968
Blank Panel

012060968
A16P14: RNCC: 3 | RNVC: 2

13 Apr 1985

5975-01-207-6309
Junction Box Assembly

012076309
2-198-1-00083: RNCC: 3 | RNVC: 2
2CT98: RNCC: 5 | RNVC: 2
2CT98: RNCC: 5 | RNVC: 9

3 May 1985

5975-01-207-0229
Electrical Box Connector

012070229
64-0183: RNCC: 3 | RNVC: 2
SHC-1037: RNCC: 3 | RNVC: 9
5035882-2: RNCC: 7 | RNVC: 9

26 Apr 1985

5975-01-208-4753
Electrical Nonmetallic Conduit Assembly

012084753
250939: RNCC: 3 | RNVC: 2

15 May 1985

5975-01-208-4301
Electrical Equipment Mounting Base

012084301
63E41211-501: RNCC: 3 | RNVC: 2
63E41211-501: RNCC: 3 | RNVC: 9
63E41211-301: RNCC: 5 | RNVC: 9

14 May 1985

5975-01-209-6794
Electrical Nonmetallic Conduit Assembly

012096794
R58HA31A34X008: RNCC: 3 | RNVC: 2
R58HA31A34X008: RNCC: 5 | RNVC: 2
R58HA31A34X008: RNCC: 5 | RNVC: 2
R58HA: RNCC: 7 | RNVC: 9

4 Jun 1985

5975-01-224-3026
Electrical Conduit Bushing

012243026
033756-0003: RNCC: 3 | RNVC: 2
3873-TB: RNCC: 3 | RNVC: 2
3873: RNCC: 3 | RNVC: 9
BLG 1204: RNCC: 5 | RNVC: 9
033756: RNCC: 7 | RNVC: 2

15 Jan 1986

5975-01-227-0843
Cable Strain Relief Bushing

012270843
BL-9205-1: RNCC: 3 | RNVC: 2

28 Feb 1986

5975-01-230-2457
Conduit Outlet

012302457
122-52828-1: RNCC: 3 | RNVC: 2

10 Apr 1986

5975-01-231-1759
Shunt

012311759
MLB200-100: RNCC: 3 | RNVC: 2

24 Apr 1986

5975-01-229-6058
Stuffing Tube

012296058
DBZM-5722-L: RNCC: 3 | RNVC: 1
13218E5149-8: RNCC: 7 | RNVC: 2

3 Apr 1986

5975-01-243-0193
Conduit Outlet Cover

012430193
270F: RNCC: 3 | RNVC: 2

21 Oct 1986

5975-01-245-3528
Electrical-Electronic Equipment Chassis

012453528
08474: RNCC: 3 | RNVC: 9
918366-4: RNCC: 7 | RNVC: 2

26 Nov 1986

5975-01-248-7952
Electrical Components Tie Down Strap

012487952
PLT1S: RNCC: 3 | RNVC: 2
1131911F00: RNCC: 5 | RNVC: 2

31 Jan 1987

5975-01-256-0926
Electrical Components Tie Down Strap

012560926
MS3368-5-9: RNCC: 2 | RNVC: 2
127-0603-005: RNCC: 5 | RNVC: 1
AS33681: RNCC: 5 | RNVC: 1
AS33681: RNCC: 5 | RNVC: 9

31 May 1987

5975-01-212-3870
Flexible Metal Conduit Assembly

012123870
4B69141-133A: RNCC: 3 | RNVC: 9
4B69141-133A: RNCC: 5 | RNVC: 2
4B69141-133A: RNCC: 5 | RNVC: 9

11 Jul 1985

5975-01-213-2864
Electrical Equipment Mounting Base

012132864
28527ASSY2488352G001: RNCC: 3 | RNVC: 2
2488352G001: RNCC: 5 | RNVC: 2

25 Jul 1985

5975-01-214-1359
Flexible Metal Conduit

012141359
SM83-16: RNCC: 3 | RNVC: 2
023700-HP2000: RNCC: 3 | RNVC: 2
750-084-64: RNCC: 5 | RNVC: 2
71350-200-31: RNCC: 5 | RNVC: 2
SM83-16: RNCC: 5 | RNVC: 9
MHT-200-31: RNCC: 5 | RNVC: 9

6 Aug 1985

5975-01-216-0023
Raceway Conduit Cover

012160023
V2100CA: RNCC: 3 | RNVC: 2
G2100C: RNCC: 5 | RNVC: 9
7903811-01: RNCC: 7 | RNVC: 2

5 Sep 1985

5975-01-216-7066
Cable Marker Sleeve

012167066
9317987-1: RNCC: 1 | RNVC: 2
TMS-1/8-1.50-9: RNCC: 3 | RNVC: 2
TMS-1/8-1.50: RNCC: 5 | RNVC: 9

15 Sep 1985

5975-01-216-2698
Strain Electrical Conductor Clamp

012162698
108167-001: RNCC: 3 | RNVC: 2

7 Sep 1985

5975-01-219-1951
Electrical Conduit Adapter

012191951
K15K0017-2BWF1: RNCC: 3 | RNVC: 2
K15K0017-2BWF1: RNCC: 3 | RNVC: 2
K15K0017: RNCC: 5 | RNVC: 9

23 Oct 1985

5975-01-220-2666
Conduit Outlet

012202666
L68L-207: RNCC: 3 | RNVC: 2
9050: RNCC: 5 | RNVC: 9

10 Nov 1985

5975-01-221-1898
Electrical Conduit Adapter

012211898
J15K0003-3: RNCC: 3 | RNVC: 9

25 Nov 1985

5975-01-222-2088
Stuffing Tube

012222088
CT0741-06: RNCC: 3 | RNVC: 2
P207-0006: RNCC: 3 | RNVC: 2
900-757-0006: RNCC: 3 | RNVC: 2
LE482-0027-0006: RNCC: 5 | RNVC: 2
LE482-0027: RNCC: 7 | RNVC: 2

7 Dec 1985

5975-01-259-2458
Rigid Metal Conduit Assembly

012592458
68A336077-1021: RNCC: 3 | RNVC: 2
68A336077-1021: RNCC: 5 | RNVC: 9

15 Jul 1987

5975-01-260-7963
Electrical Conduit Adapter

012607963
S2182F1550-1-12C: RNCC: 3 | RNVC: 2
GA801HL17F12CB: RNCC: 7 | RNVC: 2

5 Aug 1987

5975-01-262-8529
Electrical Equipment Mounting Base

012628529
2508700: RNCC: 3 | RNVC: 2
2508700: RNCC: 5 | RNVC: 9

4 Sep 1987

5975-01-263-2273
Electrical Wall Plate

012632273
SS720: RNCC: 3 | RNVC: 9
93111: RNCC: 5 | RNVC: 9
S-720: RNCC: 5 | RNVC: 9

11 Sep 1987

5975-01-267-7818
Electrical Nonmetallic Conduit Assembly

012677818
K58H0005-2: RNCC: 3 | RNVC: 2
K58H0005-2: RNCC: 5 | RNVC: 2
K58H00005-2: RNCC: 5 | RNVC: 9
K58H0005-2: RNCC: 5 | RNVC: 9

18 Nov 1987

5975-01-267-7820
Electrical Nonmetallic Conduit Assembly

012677820
R58HB02B44A016: RNCC: 3 | RNVC: 2
R58HB02B44A016: RNCC: 5 | RNVC: 9

18 Nov 1987

5975-01-268-6429
Electrical Box Connector

012686429
106-0093: RNCC: 3 | RNVC: 2
2556: RNCC: 5 | RNVC: 2

4 Dec 1987

5975-01-270-8546
Blank Panel

012708546
5598130: RNCC: 3 | RNVC: 1
12341550: RNCC: 3 | RNVC: 2

14 Jan 1988

5975-01-271-3999
Junction Box Cover

012713999
4B69133-117A: RNCC: 3 | RNVC: 2

23 Jan 1988

5975-01-280-3322
Conduit Outlet

012803322
LR75-A: RNCC: 3 | RNVC: 2
T12617957 PC37: RNCC: 5 | RNVC: 9

8 Jun 1988

5975-01-193-6739
Blank Panel

011936739
12325479: RNCC: 3 | RNVC: 2
5975011936739: RNCC: 6 | RNVC: 9

6 Nov 1984

5975-01-256-4540
Electrical Equipment Rack

012564540
209-071-528-101: RNCC: 3 | RNVC: 2

5 Jun 1987

5975-01-258-6233
Electrical Nonmetallic Conduit Assembly

012586233
R58HA10B33W009A: RNCC: 3 | RNVC: 1
R58HA10B33W009A: RNCC: 5 | RNVC: 1
R58HA10B33W009A: RNCC: 5 | RNVC: 9

5 Jul 1987

5975-01-258-6232
Electrical Nonmetallic Conduit Assembly

012586232
R58HA04C49W010: RNCC: 3 | RNVC: 2
R58HA04C49W010: RNCC: 3 | RNVC: 2
R58HA04C49W010: RNCC: 5 | RNVC: 2
R58HA04C49W010: RNCC: 5 | RNVC: 9

5 Jul 1987

5975-01-283-6256
Electrical-Electronic Equipment Chassis

012836256
V-3002: RNCC: 3 | RNVC: 9
ST83D65-5: RNCC: 5 | RNVC: 9
ST83D65: RNCC: 5 | RNVC: 9

10 Aug 1988

5975-01-074-3445
Cable Hanger

010743445
12286547: RNCC: 3 | RNVC: 2
3-140-367-03: RNCC: 5 | RNVC: 1

30 Mar 1979

5975-01-070-9503
Electrical Cable Protector

010709503
12268802: RNCC: 3 | RNVC: 2

25 Jan 1979

5975-01-081-3309
Internal Raceway Elbow

010813309
G-4017: RNCC: 3 | RNVC: 2

11 Aug 1979

5975-01-082-3466
Electrical Components Tie Down Strap

010823466
TY33M-X: RNCC: 3 | RNVC: 2
PLC1M-S4-M0: RNCC: 5 | RNVC: 2
94180099: RNCC: 5 | RNVC: 2
TY33M-0: RNCC: 5 | RNVC: 9

31 Aug 1979

5975-01-083-9642
Electrical Equipment Cabinet

010839642
A1210SC: RNCC: 3 | RNVC: 2
AB-12105JS: RNCC: 5 | RNVC: 2
E-1210SC: RNCC: 5 | RNVC: 9
002-0232: RNCC: 5 | RNVC: 9

5 Oct 1979

5975-01-093-2469
Electrical Box Connector

010932469
TW150-SI: RNCC: 3 | RNVC: 2
2126: RNCC: 3 | RNVC: 2
TC725A: RNCC: 5 | RNVC: 2
TC725: RNCC: 5 | RNVC: 9
5039: RNCC: 5 | RNVC: 9

12 Apr 1980

5975-01-097-4381
Electrical Tie Down Mounting Base

010974381
TM1A: RNCC: 3 | RNVC: 2
3550013-001: RNCC: 3 | RNVC: 2
TM1A: RNCC: 5 | RNVC: 2
HS4271-1: RNCC: 5 | RNVC: 9
HS4271-1: RNCC: C | RNVC: 1

11 Jul 1980

5975-01-081-0202
Electrical Equipment Mounting Base

010810202
622-4933-001: RNCC: 3 | RNVC: 2
MT-4934/ARC: RNCC: 5 | RNVC: 1
706A35-402-033: RNCC: 5 | RNVC: 2
622-4933-001: RNCC: 5 | RNVC: 2
622-4933-001: RNCC: 5 | RNVC: 2
5975PL0191736: RNCC: 6 | RNVC: 9

7 Aug 1979

5975-01-104-1496
Electrical Equipment Mounting Base

011041496
622-5371-001: RNCC: 3 | RNVC: 2
MT-6141/ARC-190(V): RNCC: 5 | RNVC: 2

28 Nov 1980

5975-01-109-3504
Electronic Ra Grill

011093504
958004-101: RNCC: 3 | RNVC: 2

13 Mar 1981

5975-01-113-1690
Rigid Metal Conduit Assembly

011131690
4B69143-197A: RNCC: 3 | RNVC: 2

17 May 1981

5975-01-116-0590
Electrical Wall Plate

011160590
84003: RNCC: 3 | RNVC: 9
97101: RNCC: 5 | RNVC: 2
S8: RNCC: 5 | RNVC: 9

18 Jul 1981

5975-01-118-8581
Electrical Conduit Ferrule

011188581
GR226-EM03: RNCC: 3 | RNVC: 2
GR226-EM03: RNCC: 5 | RNVC: 2
GR226-EM03: RNCC: 5 | RNVC: 2
GR2126-3: RNCC: 5 | RNVC: 9
GR2126-EM03: RNCC: 5 | RNVC: 9

12 Sep 1981

5975-01-120-1050
Electrical Conduit Bend

011201050
UA9AE: RNCC: 3 | RNVC: 2
UA9AE: RNCC: 3 | RNVC: 9
59589: RNCC: 5 | RNVC: 2
00034481060420: RNCC: 5 | RNVC: 9
E780E: RNCC: 5 | RNVC: 9

11 Oct 1981

5975-01-119-9336
Electrical Box Connector

011199336
SHC-1033: RNCC: 3 | RNVC: 2
66881AX: RNCC: 5 | RNVC: 2
66881AX: RNCC: 5 | RNVC: 9
64-0181: RNCC: C | RNVC: 1

8 Oct 1981

5975-01-121-6698
Cable Marker Sleeve

011216698
SS7074-420: RNCC: 3 | RNVC: 2

7 Nov 1981

5975-01-121-8601
Blank Panel

011218601
A-12P10: RNCC: 3 | RNVC: 9
A-12P10: RNCC: 5 | RNVC: 9

10 Nov 1981

5975-01-124-7706
Electrical Conductor Bushing

011247706
74B878001-123: RNCC: 1 | RNVC: 2
CT0905-123: RNCC: 3 | RNVC: 2
10134279: RNCC: 6 | RNVC: 9

12 Jan 1982

5975-01-124-5525
Electrical Conduit Adapter

011245525
S1877-18: RNCC: 3 | RNVC: 2
C8933-9: RNCC: 5 | RNVC: 9

7 Jan 1982

5975-01-124-7707
Electrical Conductor Bushing

011247707
CTO905-02C: RNCC: 3 | RNVC: 2
74B878001-143: RNCC: 5 | RNVC: 2
74B878001-143: RNCC: 5 | RNVC: 9
CT0905-143: RNCC: 5 | RNVC: 9
10134280: RNCC: 6 | RNVC: 9

12 Jan 1982

5975-01-126-7820
Conduit Clip Kit

011267820
12307604: RNCC: 3 | RNVC: 2

17 Feb 1982

5975-01-125-4411
Electrical Equipment Mounting Base

011254411
622-1742-004: RNCC: 3 | RNVC: 2
MT-4777/AN/ARC-174V: RNCC: 5 | RNVC: 1

27 Jan 1982

5975-01-129-0443
Conduit Outlet Cover

011290443
BS-50A: RNCC: 3 | RNVC: 2
K50-A: RNCC: 5 | RNVC: 9
BS-50A: RNCC: 5 | RNVC: 9

31 Mar 1982

5975-01-129-2485
Chassis Base

011292485
725501-1: RNCC: 3 | RNVC: 2
725501-1: RNCC: 5 | RNVC: 2
725501-1: RNCC: 5 | RNVC: 2
725501: RNCC: 5 | RNVC: 2
725501-1: RNCC: 5 | RNVC: 9

4 Apr 1982

5975-01-135-5560
Electronic Junction Rack

011355560
M81714/16-1: RNCC: 2 | RNVC: 2
MIL-T-81714/16: RNCC: 4 | RNVC: 1
M81714/16-1: RNCC: 5 | RNVC: 1
1-591621-0: RNCC: 5 | RNVC: 1
TJT03010: RNCC: 5 | RNVC: 2
MRTBL-10: RNCC: 5 | RNVC: 9

27 Jul 1982

5975-01-142-0712
Electrical Conduit Bend

011420712
ANSI/UL797: RNCC: 3 | RNVC: 1
12267095: RNCC: 3 | RNVC: 2

10 Nov 1982

5975-01-139-6204
Conduit Clamp

011396204
923-S: RNCC: 3 | RNVC: 2
PS1128: RNCC: 5 | RNVC: 9

5 Oct 1982

5975-01-141-3262
Conduit Outlet Cover

011413262
11685903: RNCC: 3 | RNVC: 2

27 Oct 1982

5975-01-142-1363
Junction Box

011421363
12267039: RNCC: 3 | RNVC: 2

12 Nov 1982

5975-01-142-8418
Flexible Metal Conduit

011428418
CAB16-3N: RNCC: 3 | RNVC: 2

21 Nov 1982

5975-01-142-3149
Conduit Connector

011423149
625-00632: RNCC: 3 | RNVC: 2

14 Nov 1982

5975-01-145-7406
Conduit Outlet

011457406
E986H: RNCC: 3 | RNVC: 2
E986H: RNCC: 5 | RNVC: 9

18 Jan 1983

5975-01-150-7597
Tiedown Strap Mounting Base

011507597
TC345A: RNCC: 3 | RNVC: 2

7 Apr 1983

5975-01-151-0299
Wiring Harness Prop

011510299
123AV56617-1: RNCC: 3 | RNVC: 2
123AV56617-1: RNCC: 5 | RNVC: 2
123AV56617-1: RNCC: 5 | RNVC: 9
123AV56617-1: RNCC: 5 | RNVC: 9

12 Apr 1983

5975-01-153-0365
Adjustable Clamp

011530365
ARC68-A-14: RNCC: 3 | RNVC: 2
35356583: RNCC: 5 | RNVC: 2
CV177915: RNCC: 5 | RNVC: 2
35356583: RNCC: 5 | RNVC: 2

11 May 1983

5975-01-158-0382
Blank Panel

011580382
876935T01: RNCC: 3 | RNVC: 2
806136 PIECE 321: RNCC: 5 | RNVC: 2
876935T01: RNCC: 5 | RNVC: 2
876935-T1: RNCC: 5 | RNVC: 9

15 Jul 1983

5975-01-159-4132
Blank Panel

011594132
824990-T2: RNCC: 3 | RNVC: 2
803517 PIECE 304: RNCC: 5 | RNVC: 1

8 Aug 1983

5975-01-124-3652
Electrical Box Connector

011243652
5232AL: RNCC: 3 | RNVC: 2
046-11-9775929: RNCC: 5 | RNVC: 2
ST50AL: RNCC: 5 | RNVC: 2
00020-0134: RNCC: 5 | RNVC: 2
5232AL: RNCC: 5 | RNVC: 9
00020-0134: RNCC: 5 | RNVC: 9
5232AL: RNCC: C | RNVC: 1

1 Jan 1982

5975-01-177-5687
Electrical Tie Down Mounting Base

011775687
HS4271-3S8: RNCC: 1 | RNVC: 2
TM3S8-C: RNCC: 3 | RNVC: 2
TM3S8-C100: RNCC: 5 | RNVC: 2
HS4271-3S8: RNCC: 5 | RNVC: 9
GB0239MX: RNCC: D | RNVC: 9

27 Apr 1984

5975-01-177-3639
Electrical Tie Down Mounting Base

011773639
TM2S6-C: RNCC: 3 | RNVC: 2
Z00.N7231110811: RNCC: 5 | RNVC: 9
HS4271-2S6: RNCC: 5 | RNVC: 9
TM2S6: RNCC: 5 | RNVC: 9
HS4271-2S6: RNCC: 7 | RNVC: 2
TM2S6-C: RNCC: C | RNVC: 1
0309267: RNCC: C | RNVC: 1
5019103: RNCC: C | RNVC: 1

24 Apr 1984

5975-01-178-4509
Stuffing Tube Packing Nut

011784509
M24235/9-061: RNCC: 2 | RNVC: 2
MIL-S-24235/9: RNCC: 4 | RNVC: 1

5 May 1984

5975-01-180-0826
Flexible Metal Conduit

011800826
206135-D10120: RNCC: 3 | RNVC: 2
759-192-135: RNCC: 5 | RNVC: 2

24 May 1984

5975-01-189-5058
Cable Hanger

011895058
441366-2: RNCC: 3 | RNVC: 2
441366-2: RNCC: 5 | RNVC: 2
441366-2: RNCC: 5 | RNVC: 9
441366-2: RNCC: 5 | RNVC: 9

16 Sep 1984

5975-01-189-4900
Electrical Box Connector

011894900
3305: RNCC: 3 | RNVC: 2
907: RNCC: 5 | RNVC: 9

16 Sep 1984

5975-01-192-0722
Electrical Equipment Mounting Base

011920722
812097-803: RNCC: 3 | RNVC: 2
812097-802: RNCC: 5 | RNVC: 9
812097: RNCC: D | RNVC: 9

16 Oct 1984

5975-01-193-1819
Junction Box

011931819
4730W50P002: RNCC: 3 | RNVC: 2

31 Oct 1984

5975-01-192-7305
Cable Strain Relief Bushing

011927305
1287: RNCC: 3 | RNVC: 2
35286764: RNCC: 5 | RNVC: 1
SR-9P-2: RNCC: 5 | RNVC: 9

25 Oct 1984

5975-01-164-3736
Cable Hanger

011643736
LD161-0015-0001: RNCC: 3 | RNVC: 2
LD161-0015-0001: RNCC: 5 | RNVC: 2

15 Oct 1983

5975-01-164-9426
Boot Kit

011649426
50680-BLK-1: RNCC: 3 | RNVC: 2
867203-1: RNCC: C | RNVC: 1

22 Oct 1983

5975-01-169-1604
Electronic Junction Rack

011691604
CTJ3A02: RNCC: 3 | RNVC: 2

4 Jan 1984

5975-01-173-8788
Blank Panel

011738788
A10P8SS: RNCC: 3 | RNVC: 2

10 Mar 1984

5975-01-175-8833
Electrical Equipment Mounting Base

011758833
70901-21919-101: RNCC: 1 | RNVC: 2
23773-1: RNCC: 3 | RNVC: 2
23773-1: RNCC: 5 | RNVC: 9

5 Apr 1984

5975-01-198-3016
Electrical Tie Down Mounting Base

011983016
TC356: RNCC: 3 | RNVC: 2
TMEH-S10-QO: RNCC: 5 | RNVC: 2
8337024: RNCC: 5 | RNVC: 9

6 Jan 1985

5975-01-202-6883
Electrical Nonmetallic Conduit Assembly

012026883
250943: RNCC: 3 | RNVC: 2

5 Mar 1985

5975-01-203-5725
Metallic Raceway

012035725
11625034: RNCC: 3 | RNVC: 2

15 Mar 1985

5975-01-203-8852
Electronic Junction Rack

012038852
M81714/5-9: RNCC: 2 | RNVC: 2
MIL-T-81714: RNCC: 4 | RNVC: 1
TJT701011: RNCC: 5 | RNVC: 2

20 Mar 1985

5975-01-204-2831
Electrical Conduit Ferrule

012042831
E-4159-260: RNCC: 3 | RNVC: 2
72-260: RNCC: 3 | RNVC: 9

24 Mar 1985

5975-01-208-6415
Interconnecting Box

012086415
62118-000: RNCC: 3 | RNVC: 2

16 May 1985

5975-01-209-4385
Ground Rod

012094385
13220E1137: RNCC: 3 | RNVC: 2

30 May 1985

5975-01-209-6789
Electrical Nonmetallic Conduit Assembly

012096789
R58HA08E35X012A: RNCC: 3 | RNVC: 2
R58HA08E35X012A: RNCC: 5 | RNVC: 1
R58HA08E35X012A: RNCC: 5 | RNVC: 2
R58HA: RNCC: 7 | RNVC: 9

4 Jun 1985

5975-01-210-2024
Rigid Metal Conduit Assembly

012102024
68A111216-1001: RNCC: 3 | RNVC: 2

7 Jun 1985

5975-01-234-0980
Electrical Entrance Elbow

012340980
SLB1: RNCC: 3 | RNVC: 2

7 Jun 1986

5975-01-243-0192
Conduit Outlet

012430192
504A: RNCC: 3 | RNVC: 2

21 Oct 1986

5975-01-239-7385
Junction Box

012397385
A20H20ALP: RNCC: 3 | RNVC: 2
AB20206NF: RNCC: 5 | RNVC: 2

4 Sep 1986

5975-01-245-7781
Junction Box

012457781
A201610LP: RNCC: 3 | RNVC: 2

4 Dec 1986

5975-01-246-6906
Cable Strain Relief Bushing

012466906
1224151-4: RNCC: 3 | RNVC: 9
1224151-4: RNCC: C | RNVC: 1

18 Dec 1986

5975-01-246-6910
Cable Strain Relief Bushing

012466910
1224151-1: RNCC: 3 | RNVC: 9
1224151-1: RNCC: C | RNVC: 1

18 Dec 1986

5975-01-248-7078
Flexible Nonmetallic Conduit

012487078
48-02217-062: RNCC: 3 | RNVC: 2
68238-R: RNCC: 5 | RNVC: 9
48-2217-062: RNCC: 5 | RNVC: 9

30 Jan 1987

5975-01-246-6904
Cable Strain Relief Bushing

012466904
1224151-2: RNCC: 3 | RNVC: 9
1224151-2: RNCC: C | RNVC: 1

18 Dec 1986

5975-01-249-5859
Flexible Metal Conduit

012495859
309D068-1: RNCC: 3 | RNVC: 2
309D068-1: RNCC: 5 | RNVC: 9

13 Feb 1987

5975-01-249-9120
Junction Box

012499120
A-1008SC: RNCC: 3 | RNVC: 2
AB-1084JS: RNCC: 5 | RNVC: 2

20 Feb 1987

5975-01-253-6580
Electrical Conduit Adapter

012536580
G63164-7: RNCC: 3 | RNVC: 2
100235-0007: RNCC: 5 | RNVC: 9
CH09-0340-407: RNCC: 5 | RNVC: 9
10250710-7: RNCC: D | RNVC: 9

23 Apr 1987

5975-01-255-5348
Ground Assy Stud

012555348
LS35022D3S12: RNCC: 3 | RNVC: 2

22 May 1987

5975-01-256-0876
Electrical Box Connector

012560876
SHC-1025: RNCC: 3 | RNVC: 2
000-8008-455: RNCC: 5 | RNVC: 1

31 May 1987

5975-01-210-8097
Electrical Nonmetallic Conduit Assembly

012108097
R58HB16E49W012A: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 9

18 Jun 1985

5975-01-211-9127
Electrical Conduit Ferrule

012119127
53230-3: RNCC: 3 | RNVC: 2

3 Jul 1985

5975-01-211-4391
Electrical Nonmetallic Conduit Assembly

012114391
R58HB31B34Y024: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 9

26 Jun 1985

5975-01-214-1354
Flexible Metal Conduit

012141354
71350-50-31: RNCC: 3 | RNVC: 1
SM83-04C: RNCC: 3 | RNVC: 2
750-084-16: RNCC: 3 | RNVC: 2
023700-HP0550: RNCC: 3 | RNVC: 2
MHT-50-31-P: RNCC: 5 | RNVC: 2
SM83-04: RNCC: 5 | RNVC: 9
023700-HP0500: RNCC: 5 | RNVC: 9

6 Aug 1985

5975-01-216-2630
Cable Hanger

012162630
109232-001: RNCC: 3 | RNVC: 2

7 Sep 1985

5975-01-220-0505
Fan Mount Rail

012200505
85794400-01: RNCC: 3 | RNVC: 9

7 Nov 1985

5975-01-220-6297
Electrical Components Tie Down Strap

012206297
PLT1.5I-M0: RNCC: 3 | RNVC: 2
HADB 1049-13: RNCC: 5 | RNVC: 2
W002151: RNCC: 5 | RNVC: 2
1049-13: RNCC: 5 | RNVC: 2
1049-13: RNCC: 5 | RNVC: 2

16 Nov 1985

5975-01-263-5415
Mounting Base Plate

012635415
FCPI2-C20: RNCC: 3 | RNVC: 2
654028-1: RNCC: 3 | RNVC: 9
654028-1: RNCC: 5 | RNVC: 9

16 Sep 1987

5975-01-265-5115
Flexible Metal Conduit Assembly

012655115
5122605-027-101: RNCC: 3 | RNVC: 2

15 Oct 1987

5975-01-265-0617
Electrical Components Tie Down Strap

012650617
SAE-AS23190: RNCC: 3 | RNVC: 1
MS3367-1-9A: RNCC: 5 | RNVC: 9
AS33671: RNCC: 5 | RNVC: 9
AS33671: RNCC: 5 | RNVC: 9

9 Oct 1987

5975-01-266-0373
Blank Panel

012660373
651-0593-001: RNCC: 3 | RNVC: 2

20 Oct 1987

5975-01-267-4237
Electrical Nonmetallic Conduit Assembly

012674237
R58HB59H59A007: RNCC: 3 | RNVC: 1
R58HB59H59A007: RNCC: 5 | RNVC: 1
R58HB59H59A007: RNCC: 5 | RNVC: 9

11 Nov 1987

5975-01-267-4230
Electrical Conduit Adapter

012674230
K15K00173DWF1: RNCC: 3 | RNVC: 2
K15K00173DWF1: RNCC: 5 | RNVC: 2
K15K00173DWF1: RNCC: 5 | RNVC: 9

11 Nov 1987

5975-01-268-6454
Conduit Outlet Cover

012686454
383: RNCC: 3 | RNVC: 2
2D62123PK: RNCC: 7 | RNVC: 2

4 Dec 1987

5975-01-269-7885
Electrical Equipment Mounting Base

012697885
622-8725-001: RNCC: 3 | RNVC: 2
MT-6587/A: RNCC: 5 | RNVC: 1
622-8725-001: RNCC: 5 | RNVC: 2
622-8725-001: RNCC: 5 | RNVC: 2

22 Dec 1987

5975-01-270-1426
Junction Bo Support

012701426
70550-02140-103: RNCC: 3 | RNVC: 2

30 Dec 1987

5975-01-271-4000
Junction Box Cover

012714000
75453-B: RNCC: 3 | RNVC: 2
75453-B: RNCC: 5 | RNVC: 9

23 Jan 1988

5975-01-273-7482
Electrical Cable Nipple

012737482
3 130 558 000: RNCC: 3 | RNVC: 2

1 Mar 1988

5975-01-274-7704
Conduit Outlet

012747704
AA50563-207ATBBA: RNCC: 2 | RNVC: 2
A-A-50563: RNCC: 4 | RNVC: 1
FSCA1: RNCC: 5 | RNVC: 1
FSCA-1-50: RNCC: 5 | RNVC: 1
W-C-586: RNCC: 5 | RNVC: 9

13 Mar 1988

5975-01-274-8806
Electrical Box Connector

012748806
SHC-1014-ZP: RNCC: 3 | RNVC: 2
5122609-023-107: RNCC: 7 | RNVC: 2

16 Mar 1988

5975-01-275-8334
Electrical Nonmetallic Conduit Assembly

012758334
R58HA08C33W008: RNCC: 3 | RNVC: 2
R58HA08C33W008: RNCC: 5 | RNVC: 9

27 Mar 1988

5975-01-275-8332
Electrical Nonmetallic Conduit Assembly

012758332
R58HA04C33W008: RNCC: 3 | RNVC: 2
R58HA04C33W008: RNCC: 3 | RNVC: 2
R58HA04C33W008: RNCC: 5 | RNVC: 9

27 Mar 1988

5975-01-276-2673
Electrical Wall Plate

012762673
86001: RNCC: 3 | RNVC: 9

6 Apr 1988

5975-01-073-3394
Support Conduit

010733394
4B69154-103A: RNCC: 3 | RNVC: 2

15 Mar 1979

5975-01-074-4497
Electrical Conduit Sealing Fitting

010744497
EYS-3-T: RNCC: 3 | RNVC: 2

31 Mar 1979

5975-01-075-7968
Electronic Junction Rack

010757968
M81714/5-2: RNCC: 2 | RNVC: 2
MIL-T-81714: RNCC: 4 | RNVC: 1
421501-033: RNCC: 5 | RNVC: 1
3602-025-1102: RNCC: 5 | RNVC: 1
591613-3: RNCC: 5 | RNVC: 1
TJT701003: RNCC: 5 | RNVC: 2
11437559-2: RNCC: 5 | RNVC: 2
757592995603: RNCC: 5 | RNVC: 9
MRTB-3: RNCC: 5 | RNVC: 9
101023-3: RNCC: 5 | RNVC: 9

26 Apr 1979

5975-01-076-9582
Electrical Tie Down Mounting Base

010769582
MBNY-203-0: RNCC: 3 | RNVC: 2
A-30-203: RNCC: 5 | RNVC: 9
MBNY-203NA: RNCC: 5 | RNVC: 9

16 May 1979

5975-01-078-1185
Electrical Conduit Coupling Nut

010781185
12282135: RNCC: 3 | RNVC: 2
12282135: RNCC: D | RNVC: 9

9 Jun 1979

5975-01-078-1309
Electrical Components Tie Down Strap

010781309
TY-512M: RNCC: 3 | RNVC: 2
PL2M-M: RNCC: 5 | RNVC: 2
M4ZS301D1341: RNCC: 5 | RNVC: 2
M4ZS301D1341A: RNCC: 5 | RNVC: 2
TY-512M: RNCC: 5 | RNVC: 9
12273322: RNCC: 5 | RNVC: 9
PLM2MC: RNCC: E | RNVC: 8
PLM2MCP: RNCC: E | RNVC: 8

9 Jun 1979

5975-01-083-0150
Electrical Conductor Bushing

010830150
516-0028-550: RNCC: 3 | RNVC: 2
591339-02: RNCC: 3 | RNVC: 2
516-0028-000: RNCC: 5 | RNVC: 9
516-0028-000: RNCC: 5 | RNVC: 9
922801-1C: RNCC: 7 | RNVC: 2

14 Sep 1979

5975-01-091-2045
Rigid Nonmetallic Conduit

010912045
A52BC12: RNCC: 3 | RNVC: 2
49009: RNCC: 5 | RNVC: 9
49009-010: RNCC: 5 | RNVC: 9

4 Mar 1980

5975-01-090-8653
Electrical Conduit Coupling

010908653
E940J: RNCC: 3 | RNVC: 9
59606: RNCC: 5 | RNVC: 2
00034481061069: RNCC: 5 | RNVC: 9

26 Feb 1980

5975-01-092-4158
Rigid Metal Conduit Assembly

010924158
11671004-1: RNCC: 3 | RNVC: 2

26 Mar 1980

5975-01-092-4234
Electrical Box Connector

010924234
3300: RNCC: 3 | RNVC: 2
L51PL: RNCC: 5 | RNVC: 9

26 Mar 1980

5975-01-094-1583
Cable Strain Relief Bushing

010941583
SRB-R-6: RNCC: 3 | RNVC: 2
R-6: RNCC: 5 | RNVC: 9
SRB-R-6: RNCC: 5 | RNVC: 9
R6: RNCC: 5 | RNVC: 9
21006868: RNCC: 7 | RNVC: 2

4 May 1980

5975-01-095-1931
Electrical Cable Nipple

010951931
389-102: RNCC: 3 | RNVC: 2
389-102: RNCC: 5 | RNVC: 9

24 May 1980

5975-01-099-4556
Electrical Cable Nipple

010994556
204223: RNCC: 3 | RNVC: 2
204223: RNCC: 5 | RNVC: 9

20 Aug 1980

5975-01-102-1586
Relay Mounting Strip

011021586
37D645: RNCC: 3 | RNVC: 2
37D645: RNCC: 5 | RNVC: 9

12 Oct 1980

5975-01-101-3089
Cord Protector

011013089
751332002600: RNCC: 3 | RNVC: 2
196667-661: RNCC: 5 | RNVC: 9

27 Sep 1980

5975-01-104-9863
Electrical Box Connector

011049863
CGB196-SG: RNCC: 3 | RNVC: 2

14 Dec 1980

5975-01-105-6821
Raceway Tee

011056821
G3015E: RNCC: 3 | RNVC: 2

2 Jan 1981

5975-01-112-6593
Rigid Metal Conduit Assembly

011126593
4B69142-115A: RNCC: 3 | RNVC: 2

8 May 1981

5975-01-112-6601
Rigid Metal Conduit Assembly

011126601
4B69143-131A: RNCC: 3 | RNVC: 2

8 May 1981

5975-01-112-6600
Rigid Metal Conduit Assembly

011126600
4B69143-129A: RNCC: 3 | RNVC: 2

8 May 1981

5975-01-112-6604
Rigid Metal Conduit Assembly

011126604
4B69142-119A: RNCC: 3 | RNVC: 2

8 May 1981

5975-01-108-2985
Ferrule

011082985
02-020187: RNCC: 3 | RNVC: 2
30001-001-21: RNCC: 5 | RNVC: 9

25 Feb 1981

5975-01-113-7251
Rigid Metal Conduit Assembly

011137251
4B69143-139A: RNCC: 3 | RNVC: 2
RC-4B69143-139A: RNCC: 5 | RNVC: 2
4B69143-139A: RNCC: 5 | RNVC: 9

3 Jun 1981

5975-01-113-8908
Convolute Reinforcement

011138908
CRN1137-6: RNCC: 3 | RNVC: 2
ST5M1570-006: RNCC: 5 | RNVC: 2

6 Jun 1981

5975-01-115-3003
Electrical Cable Protector

011153003
12293171: RNCC: 3 | RNVC: 2

2 Jul 1981

5975-01-118-5247
Telescoping End Fitting

011185247
200702-FE5105: RNCC: 3 | RNVC: 2
RP2100-EM05-T: RNCC: 5 | RNVC: 2
RP2100-G05-T: RNCC: 5 | RNVC: 9
RP 2100-F05-T: RNCC: 5 | RNVC: 9
S82100-F05-T: RNCC: 5 | RNVC: 9
RP 2100-F05-T: RNCC: 5 | RNVC: 9
S82100-F05-T: RNCC: 5 | RNVC: 9

4 Sep 1981

5975-01-118-8873
Conduit Chase Nipple

011188873
28-12-4KC: RNCC: 3 | RNVC: 2
188192-FA12K3: RNCC: 5 | RNVC: 1

13 Sep 1981

5975-01-119-5678
Electrical Cable Protector

011195678
12298998: RNCC: 3 | RNVC: 2
10087273: RNCC: 6 | RNVC: 9

26 Sep 1981

5975-01-119-1811
Electrical Conduit Locknut

011191811
113323A: RNCC: 3 | RNVC: 2
141: RNCC: 3 | RNVC: 9
113323A: RNCC: 5 | RNVC: 9
7-659-000205: RNCC: C | RNVC: 1

19 Sep 1981

5975-01-131-2239
Electrical Cable Nipple

011312239
ST5M1487-009: RNCC: 3 | RNVC: 2
885-325-001: RNCC: 5 | RNVC: 2
10134282: RNCC: 6 | RNVC: 9

6 May 1982

5975-01-130-2580
Junction Box Cover

011302580
65560-03108-102: RNCC: 3 | RNVC: 2

19 Apr 1982

5975-01-132-0223
Electrical Conduit Locknut

011320223
BLSG75: RNCC: 3 | RNVC: 9
BLSG75: RNCC: 5 | RNVC: 2

20 May 1982

5975-01-137-8490
Conduit Outlet

011378490
5133664: RNCC: 3 | RNVC: 2
E986E: RNCC: 5 | RNVC: 9
51407: RNCC: 5 | RNVC: 9
59201: RNCC: 5 | RNVC: 9

4 Sep 1982

5975-01-142-2926
Electrical Conduit Bend

011422926
ANSI/UL797: RNCC: 3 | RNVC: 1
12267099: RNCC: 3 | RNVC: 2

14 Nov 1982

5975-01-144-1061
Electronic Junction Rack

011441061
CTJ-3A-10-4021: RNCC: 3 | RNVC: 2

14 Dec 1982

5975-01-146-2852
Junction Box

011462852
A1008NFAL: RNCC: 3 | RNVC: 2
404-4597571-4: RNCC: 5 | RNVC: 2

27 Jan 1983

5975-01-146-6395
90 Elbow Assembly

011466395
C196AX2523DA: RNCC: 3 | RNVC: 2

3 Feb 1983

5975-01-148-6444
Junction Box

011486444
58313-42701-1: RNCC: 3 | RNVC: 2

8 Mar 1983

5975-01-152-5449
Blank Panel

011525449
A6P6AL: RNCC: 3 | RNVC: 2

4 May 1983

5975-01-158-2749
Blank Panel

011582749
875944-T1: RNCC: 3 | RNVC: 2
806136 PIECE 320: RNCC: 5 | RNVC: 2

19 Jul 1983

5975-01-158-4645
Electrical Box Connector

011584645
3237: RNCC: 3 | RNVC: 2
915/4/07788/001: RNCC: 5 | RNVC: 2

23 Jul 1983

5975-01-176-6872
Electrical Box Connector

011766872
91701170: RNCC: 3 | RNVC: 9
91701170: RNCC: C | RNVC: 1

15 Apr 1984

5975-01-178-0571
Interconnecting Box

011780571
5053T69P01: RNCC: 1 | RNVC: 2
5053T69P01: RNCC: 3 | RNVC: 2
600286: RNCC: 3 | RNVC: 9

1 May 1984

5975-01-180-4596
Stuffing Tube

011804596
4667054: RNCC: 3 | RNVC: 2

29 May 1984

5975-01-180-9475
Electrical Components Tie Down Strap

011809475
TY-242MX: RNCC: 3 | RNVC: 2

5 Jun 1984

5975-01-179-4458
Blank Panel

011794458
6226240-1: RNCC: 3 | RNVC: 2
6226240-1: RNCC: 5 | RNVC: 2

18 May 1984

5975-01-184-0636
Conduit Outlet Cover

011840636
K125-150A: RNCC: 3 | RNVC: 2
K125-A: RNCC: 5 | RNVC: 9

13 Jul 1984

5975-01-186-3474
Electrical Box Connector

011863474
CGB397-SG: RNCC: 3 | RNVC: 2
CGB397: RNCC: 5 | RNVC: 1
90007027: RNCC: E | RNVC: 8

9 Aug 1984

5975-01-185-9007
Electrical-Electronic Equipment Panel

011859007
406-075-136-101: RNCC: 3 | RNVC: 2

5 Aug 1984

5975-01-186-9956
Conduit Outlet Cover

011869956
K75-A: RNCC: 3 | RNVC: 2

17 Aug 1984

5975-01-188-2784
Blank Panel

011882784
806292PC303: RNCC: 3 | RNVC: 2
N20-T1: RNCC: 5 | RNVC: 2

31 Aug 1984

5975-01-163-6036
Molded Actuator Boot

011636036
730-4403-4: RNCC: 3 | RNVC: 2

5 Oct 1983

5975-01-166-6539
Electrical Conduit Tee

011666539
8911295: RNCC: 3 | RNVC: 2
21102: RNCC: 5 | RNVC: 2

16 Nov 1983

5975-01-170-2609
Stuffing Tube

011702609
CT0741-03: RNCC: 3 | RNVC: 2
P207-0003: RNCC: 5 | RNVC: 9
LE482-0027-0003: RNCC: 7 | RNVC: 2

22 Jan 1984

5975-01-170-3480
Junction Box Cover

011703480
10924576: RNCC: 3 | RNVC: 2
10924576: RNCC: 5 | RNVC: 9

24 Jan 1984

5975-01-168-0475
Electrical-Electronic Equipment Chassis

011680475
12317124: RNCC: 3 | RNVC: 2

10 Dec 1983

5975-01-170-4131
Rigid Metal Conduit Assembly

011704131
13074552: RNCC: 3 | RNVC: 2
N13074552: RNCC: 5 | RNVC: 9
13074552: RNCC: 5 | RNVC: 9

24 Jan 1984

5975-01-168-1564
Electrical Conduit Coupling

011681564
240-DC: RNCC: 3 | RNVC: 9

13 Dec 1983

5975-01-173-0332
Electrical Components Tie Down Strap

011730332
21662224-032: RNCC: 3 | RNVC: 9
2166 2224-032: RNCC: 5 | RNVC: 2
21662224-032: RNCC: 5 | RNVC: 9
90891-991: RNCC: 5 | RNVC: 9
TM3S8: RNCC: 5 | RNVC: 9

29 Feb 1984

5975-01-175-0929
Blank Panel

011750929
N111-T1: RNCC: 3 | RNVC: 2
806314 PIECE 305: RNCC: 5 | RNVC: 2

27 Mar 1984

5975-01-175-8834
Electrical Equipment Mounting Base

011758834
70901-21915-102: RNCC: 1 | RNVC: 2
23706-2: RNCC: 3 | RNVC: 2
70901-21915-107: RNCC: 5 | RNVC: 2

5 Apr 1984

5975-01-189-4660
Cable Hanger

011894660
12324192: RNCC: 3 | RNVC: 2

15 Sep 1984

5975-01-198-0638
Blank Panel

011980638
7-314200005: RNCC: 3 | RNVC: 2
7-314200005: RNCC: 5 | RNVC: 9

4 Jan 1985

5975-01-197-8462
Electrical Equipment Mounting Base

011978462
A3013787-1: RNCC: 3 | RNVC: 2

29 Dec 1984

5975-01-203-2127
Electrical Components Tie Down Strap

012032127
6-300-000326: RNCC: 3 | RNVC: 2
6-300-000326: RNCC: 5 | RNVC: 1
2CF508: RNCC: 5 | RNVC: 2
1159-6-300-000326: RNCC: 5 | RNVC: 2
2CF508: RNCC: 5 | RNVC: 9
1159-6-300-000326: RNCC: 5 | RNVC: 9

12 Mar 1985

5975-01-205-6233
Stuffing Tube

012056233
CT0741-05: RNCC: 3 | RNVC: 2
P207-0005: RNCC: 3 | RNVC: 2
LE482-0027-0005: RNCC: 7 | RNVC: 2

10 Apr 1985

5975-01-206-8844
Stuffing Tube

012068844
CT0285: RNCC: 3 | RNVC: 2

24 Apr 1985

5975-01-208-6233
Cable Hanger

012086233
AS23190/1: RNCC: 3 | RNVC: 1
M23190/1-3: RNCC: 3 | RNVC: 2
AS23190/1: RNCC: 5 | RNVC: 9
M23190/1-3: RNCC: 5 | RNVC: 9
M23190/1-3: RNCC: 5 | RNVC: 9
MIL-S-23190/1: RNCC: 5 | RNVC: 9

16 May 1985

5975-01-209-6787
Electrical Nonmetallic Conduit Assembly

012096787
R58HA04C44W008: RNCC: 3 | RNVC: 2
R58HA04C44W008: RNCC: 5 | RNVC: 2
R58HA04C44W008: RNCC: 5 | RNVC: 2
R58HA: RNCC: 7 | RNVC: 9

4 Jun 1985

5975-01-223-8533
Electrical Components Tie Down Strap

012238533
PLT2M-C: RNCC: 3 | RNVC: 2
RT377: RNCC: 5 | RNVC: 2
TY5232M: RNCC: 5 | RNVC: 2
10170: RNCC: 5 | RNVC: 2
10325: RNCC: 5 | RNVC: 2
PLT2M: RNCC: 5 | RNVC: 9
R18L9C: RNCC: 5 | RNVC: 9
WIT-18V: RNCC: 5 | RNVC: 9

8 Jan 1986

5975-01-224-4017
Electrical Nonmetallic Conduit Assembly

012244017
251793: RNCC: 3 | RNVC: 2

15 Jan 1986

5975-01-224-7208
Rigid Metal Conduit Assembly

012247208
210568-DI0140: RNCC: 3 | RNVC: 2
5904030-2: RNCC: 5 | RNVC: 2
5904030-2: RNCC: 5 | RNVC: 9
5904030-2: RNCC: 5 | RNVC: 9

22 Jan 1986

5975-01-226-2619
Blank Panel

012262619
1244126-1: RNCC: 3 | RNVC: 9
1244126-1: RNCC: C | RNVC: 1

14 Feb 1986

5975-01-242-0292
Cable Spacer

012420292
62A25B3: RNCC: 3 | RNVC: 2

6 Oct 1986

5975-01-247-2288
Rigid Metal Conduit

012472288
B1900-7202: RNCC: 3 | RNVC: 2

30 Dec 1986

5975-01-247-3941
Electrical Components Tie Down Strap

012473941
PLT4S0: RNCC: 3 | RNVC: 2
23-9796-509: RNCC: 5 | RNVC: 2

6 Jan 1987

5975-01-249-3410
Stuffing Tube Packing Nut

012493410
M24235/1-020: RNCC: 2 | RNVC: 2
MIL-S-24235: RNCC: 4 | RNVC: 1

10 Feb 1987

5975-01-249-7235
Stuffing Tube

012497235
M24235/14-003: RNCC: 2 | RNVC: 2
MIL-S-24235: RNCC: 4 | RNVC: 1

15 Feb 1987

5975-01-250-4761
Stuffing Tube

012504761
M24235/13-008: RNCC: 2 | RNVC: 2
MIL-S-24235: RNCC: 4 | RNVC: 1
M24235/13-008: RNCC: 5 | RNVC: 1
336817: RNCC: C | RNVC: 1

2 Mar 1987

5975-01-250-6428
Electrical Conductor Bushing

012506428
8-140-002-13: RNCC: 3 | RNVC: 2

5 Mar 1987

5975-01-252-6485
Conduit Outlet Cover

012526485
FSK-2B-CM: RNCC: 3 | RNVC: 2
ST29D40: RNCC: 5 | RNVC: 9

5 Apr 1987

5975-01-254-0423
Junction Box

012540423
A8066CH: RNCC: 3 | RNVC: 2

30 Apr 1987

5975-01-256-2562
Ground Rod Kit

012562562
SC-C-446190: RNCC: 3 | RNVC: 2

3 Jun 1987

5975-01-210-8078
Electrical Nonmetallic Conduit Assembly

012108078
R58HB09D34W008D: RNCC: 3 | RNVC: 1
R58HB09D34W008D: RNCC: 5 | RNVC: 9
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

18 Jun 1985

5975-01-210-9825
Electrical Box Connector

012109825
CGB296SG: RNCC: 3 | RNVC: 2
120-01891-5: RNCC: 3 | RNVC: 2
13229E0880-5: RNCC: 3 | RNVC: 2
120-01891-5: RNCC: 5 | RNVC: 9
SR-75-750: RNCC: 5 | RNVC: 9

20 Jun 1985

5975-01-212-7863
Flexible Metal Conduit

012127863
1/2 IN. TYPE O.R.: RNCC: 3 | RNVC: 2
12275547-2: RNCC: E | RNVC: 8

18 Jul 1985

5975-01-214-0370
Cable Hanger

012140370
343-0170-00: RNCC: 3 | RNVC: 2
343-0170-00: RNCC: 5 | RNVC: 2

4 Aug 1985

5975-01-217-0579
Blank Panel

012170579
PMBF-1: RNCC: 3 | RNVC: 2

20 Sep 1985

5975-01-219-1950
Electrical Conduit Adapter

012191950
K15K0017-2HWF1: RNCC: 3 | RNVC: 2
K15K0017: RNCC: 5 | RNVC: 9

23 Oct 1985

5975-01-259-9212
Electrical Cable Assembly Protector

012599212
405-10661-2: RNCC: 3 | RNVC: 2

23 Jul 1987

5975-01-220-0507
Fan Mount Rail

012200507
85794400-03: RNCC: 3 | RNVC: 9

7 Nov 1985

5975-01-222-2083
Electrical Nonmetallic Conduit Assembly

012222083
R58HB12H16Y018C: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 9

7 Dec 1985

5975-01-263-0104
Electrical Conduit Adapter

012630104
RP2100-EM04-T: RNCC: 3 | RNVC: 2
RP2110-04-T: RNCC: 5 | RNVC: 2
RP2110-EM04-T: RNCC: 5 | RNVC: 9
RP2000: RNCC: 5 | RNVC: 9
SA2110-EM04-T: RNCC: 5 | RNVC: 9

9 Sep 1987

5975-01-260-2731
Electrical Equipment Mounting Base

012602731
9385012: RNCC: 1 | RNVC: 2
A0LA-X1068: RNCC: 3 | RNVC: 2
A0LA-X1068: RNCC: 5 | RNVC: 9

29 Jul 1987

5975-01-267-1762
Electrical Conduit Locknut

012671762
142SL: RNCC: 3 | RNVC: 2

5 Nov 1987

5975-01-270-4588
Junction Box

012704588
KS-23560-1 PIECE 6: RNCC: 3 | RNVC: 2
KS-23560-1 PIECE 6: RNCC: 5 | RNVC: 9

7 Jan 1988

5975-01-270-9984
Tube

012709984
CTG04EJE: RNCC: 3 | RNVC: 2
46-055795-01: RNCC: 5 | RNVC: 2
46-055795-01: RNCC: 7 | RNVC: 9

16 Jan 1988

5975-01-271-1314
Electrical Conduit Adapter

012711314
11449338-2: RNCC: 3 | RNVC: 2
11449338-2: RNCC: 5 | RNVC: 1
A102: RNCC: 5 | RNVC: 9

19 Jan 1988

5975-01-271-2990
Electrical Conduit Adapter

012712990
11449359: RNCC: 3 | RNVC: 2
11449359: RNCC: 5 | RNVC: 9

22 Jan 1988

5975-01-274-4710
Conduit Outlet Cover

012744710
5122609-013-103: RNCC: 3 | RNVC: 2
ZP-C-2520-12: RNCC: 3 | RNVC: 2

9 Mar 1988

5975-01-274-4810
Block Mounting Bracket

012744810
M81714/29-1: RNCC: 3 | RNVC: 2
M81714/29-1: RNCC: 3 | RNVC: 9
AS81714/29: RNCC: 5 | RNVC: 1
M81714/29-1: RNCC: 5 | RNVC: 9
MIL-T-81714/29: RNCC: 5 | RNVC: 9
AS81714/29: RNCC: 5 | RNVC: 9

9 Mar 1988

5975-01-275-2738
Parallel Clamp

012752738
423B: RNCC: 3 | RNVC: 9
624: RNCC: 5 | RNVC: 9

19 Mar 1988

5975-01-275-5182
Electrical Nonmetallic Conduit Assembly

012755182
R58HA02B31A008: RNCC: 3 | RNVC: 2
R58HA02B31A008: RNCC: 5 | RNVC: 9

23 Mar 1988

Load More Results