What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 107 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 107of 491

5975-01-308-2445
Box Assembly

013082445
104024-0: RNCC: 3 | RNVC: 2

27 Sep 1989

5975-01-308-5600
Electrical Box Connector

013085600
TW-75CSI: RNCC: 3 | RNVC: 2
MW651S: RNCC: 3 | RNVC: 2
7075ST: RNCC: 5 | RNVC: 9

30 Sep 1989

5975-01-310-0568
Cable Nipple Cover

013100568
260322-2: RNCC: 3 | RNVC: 2
260322-2: RNCC: C | RNVC: 1

29 Oct 1989

5975-01-312-6400
Electrical Equipment Mounting Base

013126400
467-46810-1: RNCC: 3 | RNVC: 2

21 Dec 1989

5975-01-311-9910
Electrical Conduit Adapter

013119910
50648-16A: RNCC: 1 | RNVC: 2
710-051NF16A: RNCC: 3 | RNVC: 2

7 Dec 1989

5975-01-318-0637
Electrical Components Tie Down Strap

013180637
5002335-3: RNCC: 3 | RNVC: 2
5002335-3: RNCC: 5 | RNVC: 9

11 Apr 1990

5975-01-321-5685
Electrical Nonmetallic Conduit Assembly

013215685
R58HA04B33A005: RNCC: 3 | RNVC: 2
R58HA04B33A005: RNCC: 5 | RNVC: 9

20 Jun 1990

5975-01-322-6360
Electrical Conduit Wye

013226360
Y-1: RNCC: 3 | RNVC: 2

11 Jul 1990

5975-01-322-6365
Conduit Outlet

013226365
FST-1-50: RNCC: 3 | RNVC: 9
158AS140-4: RNCC: 5 | RNVC: 2
FST-1-50: RNCC: C | RNVC: 1

11 Jul 1990

5975-01-324-0308
Fanning Strip

013240308
7241541-10: RNCC: 3 | RNVC: 2

8 Aug 1990

5975-01-344-3765
Electrical Tie Down Mounting Base

013443765
TM1S4-C: RNCC: 3 | RNVC: 2
900698-1: RNCC: 5 | RNVC: 9
10134306: RNCC: 6 | RNVC: 9
10139252-101: RNCC: 7 | RNVC: 2
900698-1: RNCC: C | RNVC: 1

27 Aug 1991

5975-01-344-4698
Electrical Tie Down Mounting Base

013444698
FTH-5A-RT -C: RNCC: 3 | RNVC: 2
FTH-5A-RT: RNCC: 5 | RNVC: 9
907970-002: RNCC: 5 | RNVC: 9
FTH-5A: RNCC: 5 | RNVC: 9

29 Aug 1991

5975-01-345-6714
Electrical Equipment Mounting Base

013456714
70600-81011-045: RNCC: 3 | RNVC: 2

23 Sep 1991

5975-01-348-8687
Electrical Components Tie Down Strap

013488687
7130K54: RNCC: 3 | RNVC: 2
7130K54: RNCC: 5 | RNVC: 9
60890: RNCC: C | RNVC: 1

18 Nov 1991

5975-01-360-9703
Electrical Components Tie Down Strap

013609703
PLT1M-MP: RNCC: 3 | RNVC: 2
T853000010: RNCC: C | RNVC: 1

7 Jul 1992

5975-01-361-6274
Electrical Box Connector

013616274
650-DC2: RNCC: 3 | RNVC: 9
650-DC2: RNCC: 5 | RNVC: 9

23 Jul 1992

5975-01-364-2051
Junction Box

013642051
6-176-000614: RNCC: 3 | RNVC: 2
2HG332: RNCC: 5 | RNVC: 2
2HG332: RNCC: 5 | RNVC: 9

14 Sep 1992

5975-01-364-5613
Electrical Box Connector

013645613
3234: RNCC: 3 | RNVC: 2

22 Sep 1992

5975-01-367-0822
Electrical-Electronic Equipment Panel

013670822
74A731171-1001: RNCC: 3 | RNVC: 2
10134311: RNCC: 6 | RNVC: 9

6 Nov 1992

5975-01-367-9502
Seat Bucket Cleat

013679502
MBEU145434: RNCC: 3 | RNVC: 2
MBEU145434: RNCC: 5 | RNVC: 2

21 Nov 1992

5975-01-370-5068
Electrical Box Connector

013705068
2922AL: RNCC: 3 | RNVC: 2

23 Jan 1993

5975-01-370-7832
Electrical Equipment Rack

013707832
12918282: RNCC: 3 | RNVC: 2
12918282: RNCC: 5 | RNVC: 2
12918282: RNCC: D | RNVC: 9

30 Jan 1993

5975-01-372-6685
Electrical Tie Down Mounting Base

013726685
22970-14313: RNCC: 1 | RNVC: 2
ABM2S-AT-C: RNCC: 3 | RNVC: 2
14313: RNCC: 5 | RNVC: 2
076-006367-002: RNCC: 5 | RNVC: 2

16 Mar 1993

5975-01-375-2392
Electrical Box Connector

013752392
AA50553-12L201S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1
6-1-6200-30: RNCC: 5 | RNVC: 9

7 May 1993

5975-01-375-8006
Electrical Conductor Bushing

013758006
741263A00: RNCC: 3 | RNVC: 2

21 May 1993

5975-01-386-6509
Cable Insert Block

013866509
RM90: RNCC: 3 | RNVC: 2
MIL-P-24705: RNCC: 4 | RNVC: 1
RM90: RNCC: 5 | RNVC: 9

10 Feb 1994

5975-01-387-6288
Filler Insert

013876288
RM 40/0: RNCC: 3 | RNVC: 2
RM 40/0: RNCC: 5 | RNVC: 9

9 Mar 1994

5975-01-326-4659
Electrical Box Connector

013264659
LS965-8: RNCC: 3 | RNVC: 2
LS965-8: RNCC: 5 | RNVC: 2
LS965-8: RNCC: 5 | RNVC: 9

25 Sep 1990

5975-01-327-3949
Cable Channel

013273949
7241541-11: RNCC: 3 | RNVC: 2

12 Oct 1990

5975-01-327-3092
Cable Marker Sleeve Set

013273092
719127-A: RNCC: 3 | RNVC: 2

11 Oct 1990

5975-01-327-3950
Cable Channel

013273950
7241541-12: RNCC: 3 | RNVC: 2

12 Oct 1990

5975-01-328-0269
Junction Box

013280269
E989NNJ: RNCC: 3 | RNVC: 9
E989NNJ: RNCC: 5 | RNVC: 2
00034881066817: RNCC: 5 | RNVC: 9

26 Oct 1990

5975-01-328-0588
Junction Box

013280588
4789287-0001A: RNCC: 3 | RNVC: 2
405-4685123 ITEM 30: RNCC: 5 | RNVC: 2
4789287-0001: RNCC: 5 | RNVC: 9

26 Oct 1990

5975-01-329-1116
Electrical Conduit Elbow

013291116
4244: RNCC: 3 | RNVC: 2

11 Nov 1990

5975-01-332-2101
Wire Mesh Grip

013322101
RPE421-119: RNCC: 3 | RNVC: 2

7 Jan 1991

5975-01-332-4749
Strain Electrical Conductor Clamp

013324749
TC828: RNCC: 3 | RNVC: 2
CTAM-1: RNCC: 3 | RNVC: 2
Z22-0002: RNCC: 7 | RNVC: 2
Z22-0002-003: RNCC: C | RNVC: 1

11 Jan 1991

5975-01-333-9262
Strain Relief Clamp

013339262
37315-1: RNCC: 3 | RNVC: 2

12 Feb 1991

5975-01-338-3564
Electrical Equipment Mounting Base

013383564
16F2261-165: RNCC: 3 | RNVC: 2

3 May 1991

5975-01-339-9789
Insulator Bracket Strap

013399789
5167448: RNCC: 3 | RNVC: 2

5 Jun 1991

5975-01-343-1310
Electronic Junction Rack

013431310
DCR-1A-02: RNCC: 3 | RNVC: 2
4081-56030-162: RNCC: 5 | RNVC: 9
4081-56030-162: RNCC: 5 | RNVC: 9

6 Aug 1991

5975-01-397-4781
Electrical Conduit Adapter

013974781
S1816C2204-8: RNCC: 3 | RNVC: 2
2613235: RNCC: 7 | RNVC: 2

12 Oct 1994

5975-01-398-1918
Flexible Nonmetallic Conduit

013981918
SAE-AS81914/1: RNCC: 3 | RNVC: 1
M81914/1-1008: RNCC: 3 | RNVC: 2
M81914/1-1008: RNCC: 5 | RNVC: 9
MIL-T-81914/1: RNCC: 5 | RNVC: 9
SAE-AS81914/4: RNCC: 5 | RNVC: 9
M81914/1-1008: RNCC: 5 | RNVC: 9
AMS-T-81914/1: RNCC: 5 | RNVC: 9
AMS-T-81914/1: RNCC: 5 | RNVC: 9
AS81914/1: RNCC: 5 | RNVC: 9

26 Oct 1994

5975-01-406-9967
Junction Box

014069967
1339AS849-1: RNCC: 3 | RNVC: 2

18 Jan 1995

5975-01-407-5604
Blank Panel

014075604
MS14129-37: RNCC: 2 | RNVC: 2

31 Jan 1995

5975-01-411-3334
Stuffing Tube

014113334
G63324-2: RNCC: 3 | RNVC: 2

22 Mar 1995

5975-01-414-9766
Electrical Cable Nipple

014149766
5728-005B: RNCC: 3 | RNVC: 2
666141: RNCC: 5 | RNVC: 9
5728-005B: RNCC: 5 | RNVC: 9

16 Jun 1995

5975-01-418-5108
Electrical Conduit Locknut

014185108
9C00015-15: RNCC: 3 | RNVC: 2

29 Aug 1995

5975-01-426-2662
Electronic Equipment Mounting Tray

014262662
3141AS466-1: RNCC: 3 | RNVC: 2
3141AS466-1: RNCC: 5 | RNVC: 2
3141AS466-1: RNCC: 5 | RNVC: 9

7 Mar 1996

5975-01-434-6887
Flexible Metal Conduit

014346887
375145-1: RNCC: 3 | RNVC: 2

5 Aug 1996

5975-01-436-1001
Flexible Metal Conduit

014361001
0175-03-HE-0500: RNCC: 3 | RNVC: 2
1741AS703-1: RNCC: 7 | RNVC: 2
1741AS703-6: RNCC: C | RNVC: 1

11 Sep 1996

5975-01-436-1005
Flexible Metal Conduit

014361005
0175-03-HE-2000: RNCC: 3 | RNVC: 2
1741AS703-4: RNCC: 7 | RNVC: 2
1741AS703-15: RNCC: C | RNVC: 1

11 Sep 1996

5975-01-436-3620
Electrical Conduit Ferrule

014363620
185508-FB5100: RNCC: 3 | RNVC: 2
1741AS738-1: RNCC: 7 | RNVC: 2

17 Sep 1996

5975-01-440-4543
Electrical Conduit Nipple

014404543
1741AS731-2: RNCC: 3 | RNVC: 2
0.750 TRADE SIZE: RNCC: 5 | RNVC: 9
1741AS731: RNCC: D | RNVC: 9

14 Jan 1997

5975-01-444-4218
Electrical Equipment Mounting Base

014444218
12974010: RNCC: 3 | RNVC: 2

6 May 1997

5975-01-446-5448
Electrical Equipment Mounting Base

014465448
071-04054-0000: RNCC: 3 | RNVC: 2

9 Jul 1997

5975-01-449-5082
Blank Panel

014495082
490021: RNCC: 3 | RNVC: 9
490021: RNCC: 5 | RNVC: 2

3 Oct 1997

5975-01-451-2143
Rigid Metal Conduit Assembly

014512143
68A250649-2066: RNCC: 3 | RNVC: 2

9 Dec 1997

5975-01-451-2160
Rigid Metal Conduit Assembly

014512160
68A250649-2068: RNCC: 3 | RNVC: 2

9 Dec 1997

5975-01-451-3709
Cable Hanger

014513709
101-107-318: RNCC: 3 | RNVC: 2

15 Dec 1997

5975-01-451-3722
Cable Hanger

014513722
101-107-459: RNCC: 3 | RNVC: 2

15 Dec 1997

5975-01-451-6546
Ground Rod Section

014516546
H96-0001-003: RNCC: 3 | RNVC: 2

23 Dec 1997

5975-01-454-8563
Electrical Cable Protector

014548563
SM-D-801318: RNCC: 3 | RNVC: 2

15 Apr 1998

5975-01-455-5882
Electronic Equipment Mounting Tray

014555882
697940-5: RNCC: 3 | RNVC: 2
1500-1590-001: RNCC: 3 | RNVC: 2

7 May 1998

5975-01-461-1433
Flexible Nonmetallic Conduit

014611433
366A-15: RNCC: 3 | RNVC: 2
A366A-15: RNCC: 3 | RNVC: 2
R-68237: RNCC: 3 | RNVC: 2
R0068237: RNCC: 5 | RNVC: 2
12339351-1: RNCC: 7 | RNVC: 2
A366A-2: RNCC: D | RNVC: 9

1 Dec 1998

5975-01-462-7225
Stuffing Tube

014627225
1945.10 SIZE L TYPE 66: RNCC: 3 | RNVC: 2
9000S620274269-120: RNCC: 5 | RNVC: 2
9000S620274269: RNCC: 5 | RNVC: 2
1945.10 SIZE A TYPE 66: RNCC: 5 | RNVC: 9

13 Feb 1999

5975-01-422-7729
Electrical Tie Down Mounting Base

014227729
CB3019AA3N750: RNCC: 3 | RNVC: 2
18-01010-01: RNCC: C | RNVC: 1

7 Dec 1995

5975-01-420-6588
Electrical-Electronic Equipment Chassis

014206588
5548487: RNCC: 3 | RNVC: 2

21 Oct 1995

5975-01-436-1003
Flexible Metal Conduit

014361003
0175-03-HE-0750: RNCC: 3 | RNVC: 2
1741AS703-2: RNCC: 7 | RNVC: 2
1741AS703-12: RNCC: C | RNVC: 1

11 Sep 1996

5975-01-326-6507
Cable Shield Adapter

013266507
GA/CSGA-K/NPT: RNCC: 3 | RNVC: 2
SEEPA-NF-K-A: RNCC: 5 | RNVC: 2
CSGA-K/NPT: RNCC: 5 | RNVC: 2
CSGA-K/NPT: RNCC: 5 | RNVC: 9

28 Sep 1990

5975-01-438-6383
Flexible Metal Conduit

014386383
M24758-E: RNCC: 2 | RNVC: 2
MIL-PRF-24758: RNCC: 4 | RNVC: 1
MIL-C-24758/1: RNCC: 5 | RNVC: 9
M24758/1-10: RNCC: 5 | RNVC: 9

14 Nov 1996

5975-01-442-1527
Flexible Metal Conduit

014421527
E22801G-0A0002: RNCC: 3 | RNVC: 2

6 Mar 1997

5975-01-444-2006
Cable Hanger

014442006
320-4-50646-103: RNCC: 3 | RNVC: 2

1 May 1997

5975-01-458-5937
Mounting Strap Assy

014585937
704AS4033: RNCC: 3 | RNVC: 1
704AS4033: RNCC: 3 | RNVC: 2

1 Sep 1998

5975-01-461-4452
Flexible Metal Conduit Assembly

014614452
200AS349-040JH10041DA132: RNCC: 3 | RNVC: 2

14 Dec 1998

5975-01-461-7574
Stuffing Tube

014617574
M24235/15-004: RNCC: 2 | RNVC: 2
MIL-S-24235/15B: RNCC: 4 | RNVC: 1

31 Dec 1998

5975-01-283-8699
Electrical Box Connector

012838699
SHC-1024: RNCC: 3 | RNVC: 2

14 Aug 1988

5975-01-285-0580
Electrical Conductor Bushing

012850580
407-43613-1: RNCC: 3 | RNVC: 2

5 Sep 1988

5975-01-287-9941
Metallic Raceway

012879941
F44L24: RNCC: 3 | RNVC: 2
1485C24: RNCC: 5 | RNVC: 9
1485C24: RNCC: C | RNVC: 1

30 Oct 1988

5975-01-288-3099
Cable Hanger

012883099
1716084 ASSY 7, TY 8: RNCC: 3 | RNVC: 1

4 Nov 1988

5975-01-289-2744
Electrical Conduit Adapter

012892744
150312: RNCC: 3 | RNVC: 2
1004-121205: RNCC: 5 | RNVC: 9

20 Nov 1988

5975-01-289-4783
Conduit Bushed Nipple

012894783
CN-50I: RNCC: 3 | RNVC: 2
2D62155PK-001: RNCC: 5 | RNVC: 1
D-270: RNCC: 5 | RNVC: 9
501-A: RNCC: 5 | RNVC: 9
1102-DCI: RNCC: 5 | RNVC: 9
CN-50I: RNCC: 5 | RNVC: 9
3602: RNCC: 5 | RNVC: 9
3662: RNCC: 5 | RNVC: 9
425-104: RNCC: 5 | RNVC: 9

23 Nov 1988

5975-01-292-6275
Electrical Equipment Drawer

012926275
11455783-2: RNCC: 3 | RNVC: 1
11455783-2: RNCC: 3 | RNVC: 2

20 Jan 1989

5975-01-294-2134
Cable Hanger

012942134
101-107-431: RNCC: 3 | RNVC: 2
101-107-431: RNCC: 5 | RNVC: 2
101-107-431: RNCC: 5 | RNVC: 9
101-107-431: RNCC: 5 | RNVC: 9

13 Feb 1989

5975-01-292-7626
Interconnecting Box Cover

012927626
1224151-10: RNCC: 3 | RNVC: 9
1224151-10: RNCC: C | RNVC: 1

21 Jan 1989

5975-01-295-9058
Electrical Cable Protector

012959058
016-003144-001: RNCC: 1 | RNVC: 2
178-0085: RNCC: 3 | RNVC: 2

13 Mar 1989

5975-01-297-4954
Electrical Nonmetallic Conduit Assembly

012974954
R58HB06B32W048: RNCC: 3 | RNVC: 2
R58HB06B32W048: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 9

4 Apr 1989

5975-01-297-6129
Electrical Conduit Adapter

012976129
100235-0032: RNCC: 3 | RNVC: 2
G63164-32: RNCC: 3 | RNVC: 2
100213-FB6200: RNCC: 3 | RNVC: 2
10250710-32: RNCC: 7 | RNVC: 2

4 Apr 1989

5975-01-297-6132
Electrical Conduit Adapter

012976132
100235-0030: RNCC: 3 | RNVC: 2
G63164-30: RNCC: 5 | RNVC: 2
CH09-0340-430: RNCC: 5 | RNVC: 2
100211-FB6200: RNCC: 5 | RNVC: 2
10250710-30: RNCC: 7 | RNVC: 2

4 Apr 1989

5975-01-297-6137
Electrical Cable Nipple

012976137
260322-1: RNCC: 3 | RNVC: 2
260322-1: RNCC: 5 | RNVC: 9

4 Apr 1989

5975-01-299-1507
Wire Conduit

012991507
735693: RNCC: 3 | RNVC: 2
10159134: RNCC: 6 | RNVC: 9

26 Apr 1989

5975-01-300-6423
Junction Box

013006423
A6044NFSS: RNCC: 3 | RNVC: 2
AB664JFCX: RNCC: 3 | RNVC: 2

17 May 1989

5975-01-302-9631
Electrical Conduit Adapter

013029631
G63162-2: RNCC: 3 | RNVC: 1
186704-FB6200: RNCC: 3 | RNVC: 1
10250676-2: RNCC: 3 | RNVC: 2
CH09-0340-202: RNCC: 5 | RNVC: 9

22 Jun 1989

5975-01-305-0854
Junction Box

013050854
574B: RNCC: 3 | RNVC: 2
574: RNCC: 5 | RNVC: 9

1 Aug 1989

5975-01-307-2526
Conduit Flexible

013072526
600232-5: RNCC: 3 | RNVC: 2
FF16929PC20: RNCC: 5 | RNVC: 2

8 Sep 1989

5975-01-308-1974
Electrical-Electronic Equipment Panel

013081974
106C5006-1C: RNCC: 3 | RNVC: 2

23 Sep 1989

5975-01-309-1793
Electrical Cable Protector

013091793
12349696: RNCC: 3 | RNVC: 2

12 Oct 1989

5975-01-308-8391
Electronic Junction Rack

013088391
CTJ-3D-03-4021: RNCC: 3 | RNVC: 2
ARMS-HN03: RNCC: 3 | RNVC: 2
SJT503301: RNCC: 3 | RNVC: 2
HS4778-103: RNCC: 5 | RNVC: 9
HS4778-103: RNCC: C | RNVC: 1

5 Oct 1989

5975-01-313-1101
Electrical Components Tie Down Strap

013131101
PLT4I: RNCC: 3 | RNVC: 2
PLT4I: RNCC: 5 | RNVC: 9
ES8616-03C: RNCC: 5 | RNVC: 9

31 Dec 1989

5975-01-313-6943
Electrical Tie Down Mounting Base

013136943
TMEH-S8-Q0: RNCC: 3 | RNVC: 2

14 Jan 1990

5975-01-314-8470
Electrical Components Tie Down Strap

013148470
BT-6-01-NT: RNCC: 3 | RNVC: 9
BT-6N: RNCC: 5 | RNVC: 2
EZ3: RNCC: 5 | RNVC: 9

7 Feb 1990

5975-01-319-0926
Electrical Cable Protector

013190926
12910379: RNCC: 3 | RNVC: 2

1 May 1990

5975-01-319-8124
Blank Panel

013198124
12345349: RNCC: 3 | RNVC: 2

15 May 1990

5975-01-320-1342
Flexible Metal Conduit

013201342
10-90657-111: RNCC: 3 | RNVC: 2

19 May 1990

5975-01-321-7294
Junction Box

013217294
A8R64: RNCC: 3 | RNVC: 2
RSC684: RNCC: 5 | RNVC: 9
T204850: RNCC: 7 | RNVC: 2

23 Jun 1990

5975-01-322-6434
Electrical Conduit Locknut

013226434
141SL: RNCC: 3 | RNVC: 2
1202: RNCC: 5 | RNVC: 2
SLG-50S: RNCC: 5 | RNVC: 9
T204875: RNCC: 7 | RNVC: 2

11 Jul 1990

5975-01-346-8339
Cable Hanger

013468339
S4419023524: RNCC: 3 | RNVC: 2
S4419023524: RNCC: 5 | RNVC: 2
884 830 454 4: RNCC: 5 | RNVC: 9

10 Oct 1991

5975-01-348-4728
Electrical Conduit Adapter

013484728
9365707-2: RNCC: 3 | RNVC: 2

10 Nov 1991

5975-01-349-1798
Rigid Metal Conduit

013491798
184235-002: RNCC: 3 | RNVC: 2
184235-002: RNCC: 5 | RNVC: 9
184235-002: RNCC: 5 | RNVC: 9

22 Nov 1991

5975-01-351-1157
Electrical Equipment Cabinet Case

013511157
CU-341: RNCC: 3 | RNVC: 2

31 Dec 1991

5975-01-352-9336
Electrical Box Connector

013529336
523159-1: RNCC: 3 | RNVC: 2

3 Feb 1992

5975-01-353-5708
Electrical Box Connector

013535708
H05091: RNCC: 3 | RNVC: 2
H05091: RNCC: 5 | RNVC: 9

13 Feb 1992

5975-01-355-3150
Fanning Strip

013553150
3332878-1: RNCC: 3 | RNVC: 2
3332878-1: RNCC: 5 | RNVC: 2
3332878-1: RNCC: 5 | RNVC: 2
3332878-1: RNCC: 5 | RNVC: 2
3332878-1: RNCC: 5 | RNVC: 2

14 Mar 1992

5975-01-360-7386
Connector Protection Flange

013607386
TH-7B: RNCC: 3 | RNVC: 2
TH-7B: RNCC: 3 | RNVC: 9
80610748099: RNCC: 5 | RNVC: 9
TH-7B: RNCC: 5 | RNVC: 9
7100164425: RNCC: 5 | RNVC: 9

30 Jun 1992

5975-01-361-8058
Electrical Components Tie Down Strap

013618058
PLT2S-M100: RNCC: 3 | RNVC: 2

25 Jul 1992

5975-01-362-7144
Electrical Conductor Bushing

013627144
2166: RNCC: 3 | RNVC: 2

14 Aug 1992

5975-01-362-5206
Flexible Nonmetallic Conduit

013625206
EFC050: RNCC: 3 | RNVC: 2
94-1332030-1: RNCC: 5 | RNVC: 2
EFC050: RNCC: 5 | RNVC: 9
94-1332030-1: RNCC: 5 | RNVC: 9

8 Aug 1992

5975-01-364-5681
Electrical Equipment Mounting Base

013645681
622-8150-001: RNCC: 3 | RNVC: 2
MT-6711/ARN-153(V): RNCC: 5 | RNVC: 9

22 Sep 1992

5975-01-370-1223
Junction Box

013701223
130360: RNCC: 3 | RNVC: 2
210002051: RNCC: 5 | RNVC: 1

14 Jan 1993

5975-01-373-0514
Cable Hanger

013730514
M23190/1-1: RNCC: 2 | RNVC: 2
AS23190: RNCC: 5 | RNVC: 1
AS23190: RNCC: 5 | RNVC: 9
MIL-S-23190/1: RNCC: 5 | RNVC: 9

26 Mar 1993

5975-01-375-6042
Electrical Cable Protector

013756042
12937485: RNCC: 3 | RNVC: 2

15 May 1993

5975-01-378-0889
Flexible Metal Conduit Assembly

013780889
57350-7FT0IN: RNCC: 3 | RNVC: 2
POD-57350-07: RNCC: 5 | RNVC: 2
57350-7: RNCC: 5 | RNVC: 9

11 Aug 1993

5975-01-378-7721
Electrical Components Tie Down Strap

013787721
PRT6EH-QO: RNCC: 3 | RNVC: 2
RT250MXZ: RNCC: 5 | RNVC: 9

21 Aug 1993

5975-01-383-8991
Electrical Nonmetallic Conduit Assembly

013838991
1328AS620-1: RNCC: 3 | RNVC: 2

6 Dec 1993

5975-01-386-0814
Stuffing Tube

013860814
41008368: RNCC: 3 | RNVC: 2

27 Jan 1994

5975-01-387-4991
Flexible Metal Conduit Assembly

013874991
57350-47FT0IN: RNCC: 3 | RNVC: 2
57350-47: RNCC: 5 | RNVC: 9

5 Mar 1994

5975-01-387-5032
Flexible Metal Conduit Assembly

013875032
57350-12FT 0IN: RNCC: 3 | RNVC: 2
57350-12: RNCC: 5 | RNVC: 9

5 Mar 1994

5975-01-387-5090
Flexible Metal Conduit Assembly

013875090
57350-34FT0IN: RNCC: 3 | RNVC: 2
57350-34: RNCC: 5 | RNVC: 2

5 Mar 1994

5975-01-387-6279
Filler Insert

013876279
RM 60/0: RNCC: 3 | RNVC: 2
RM 60/0: RNCC: 5 | RNVC: 9
60/0: RNCC: 5 | RNVC: 9

9 Mar 1994

5975-01-387-6285
Cable Insert Block

013876285
RM 60: RNCC: 3 | RNVC: 2
RM 60: RNCC: 5 | RNVC: 9

9 Mar 1994

5975-01-387-6286
Stayplate

013876286
STAYPLATE SS: RNCC: 3 | RNVC: 2
STAYPLATE SS 120: RNCC: 3 | RNVC: 2
STAYPLATE SS: RNCC: 5 | RNVC: 9

9 Mar 1994

5975-01-327-3296
Electrical Components Tie Down Strap

013273296
AS33681: RNCC: 3 | RNVC: 1
MS3368-4-3D: RNCC: 3 | RNVC: 2
AS33681: RNCC: 5 | RNVC: 9
MS3368-4-3D: RNCC: 5 | RNVC: 9
MS3368-4-3D: RNCC: 5 | RNVC: 9

11 Oct 1990

5975-01-331-5922
Junction Box

013315922
54675: RNCC: 3 | RNVC: 2

21 Dec 1990

5975-01-333-1287
Stuffing Tube

013331287
817-25002S155: RNCC: 3 | RNVC: 2
841529-26: RNCC: 5 | RNVC: 9
841529-26: RNCC: C | RNVC: 1

25 Jan 1991

5975-01-334-9847
Electrical Wall Plate

013349847
CCGV: RNCC: 3 | RNVC: 2
WGF100-CV: RNCC: 5 | RNVC: 9

5 Mar 1991

5975-01-336-0178
Rigid Metal Conduit Assembly

013360178
4194-358: RNCC: 3 | RNVC: 2

19 Mar 1991

5975-01-339-8210
Junction Box Cover

013398210
743530: RNCC: 3 | RNVC: 2

31 May 1991

5975-01-343-1294
Flexible Nonmetallic Conduit

013431294
SAE-AS81914/4: RNCC: 3 | RNVC: 1
M81914/4-1201: RNCC: 3 | RNVC: 2
AMS-T-81914/4: RNCC: 5 | RNVC: 1
AMS-T-81914: RNCC: 5 | RNVC: 1
M81914/4-1201: RNCC: 5 | RNVC: 9
AMS-T-81914: RNCC: 5 | RNVC: 9
MIL-T-81914: RNCC: 5 | RNVC: 9
M81914/4-1201: RNCC: 5 | RNVC: 9
AMS-T-81914/4: RNCC: 5 | RNVC: 9
10134300: RNCC: 6 | RNVC: 9

6 Aug 1991

5975-01-360-7385
Connector Protection Flange

013607385
TH-6E: RNCC: 3 | RNVC: 2
TH-6E: RNCC: 3 | RNVC: 9
TH-6E: RNCC: 5 | RNVC: 2
TH-6E: RNCC: 5 | RNVC: 9
TH-6E: RNCC: 5 | RNVC: 9
TH-6E: RNCC: 5 | RNVC: 9
7287116-005: RNCC: 5 | RNVC: 9
TH-6E: RNCC: 5 | RNVC: 9
7287116: RNCC: D | RNVC: 9

30 Jun 1992

5975-01-408-3034
Cable Marker Sleeve

014083034
100906-0007: RNCC: 3 | RNVC: 2

14 Feb 1995

5975-01-407-8852
Electrical Conduit Adapter

014078852
2633762-2: RNCC: 3 | RNVC: 2
S1816F2206-8: RNCC: 5 | RNVC: 2

7 Feb 1995

5975-01-412-8653
Electrical Cable Assembly Protector

014128653
A3050654-1: RNCC: 3 | RNVC: 2

29 Apr 1995

5975-01-413-1471
Electrical Conduit Adapter

014131471
21A30135-1: RNCC: 3 | RNVC: 2
1221371: RNCC: 7 | RNVC: 2

6 May 1995

5975-01-416-0682
Junction Box

014160682
A808CH: RNCC: 3 | RNVC: 2

12 Jul 1995

5975-01-416-3551
Protetion Connector Kit

014163551
HCPS-69: RNCC: 3 | RNVC: 2
HCPS-69: RNCC: 3 | RNVC: 9
HCPS-69: RNCC: 5 | RNVC: 9
HCPS-69: RNCC: 5 | RNVC: 9
6317971-021: RNCC: 7 | RNVC: 2
7100164431: RNCC: C | RNVC: 1
HCPS-69: RNCC: C | RNVC: 1

17 Jul 1995

5975-01-420-0336
Electrical Box Entry Flange

014200336
9253: RNCC: 3 | RNVC: 2

5 Oct 1995

5975-01-422-7556
Electrical Cable Nipple

014227556
5780-000R: RNCC: 3 | RNVC: 9
12421186-002: RNCC: 5 | RNVC: 2
12421186-002: RNCC: 5 | RNVC: 2
12421186-002: RNCC: 5 | RNVC: 2
5737-005R: RNCC: 5 | RNVC: 9
12421186: RNCC: D | RNVC: 9

7 Dec 1995

5975-01-426-1518
Junction Box

014261518
A10106CH: RNCC: 3 | RNVC: 2

5 Mar 1996

5975-01-430-3109
Electrical Equipment Mounting Base

014303109
A3154893: RNCC: 3 | RNVC: 2
A3154893: RNCC: 5 | RNVC: 2
MT-6845/VRC: RNCC: 5 | RNVC: 9

26 Apr 1996

5975-01-430-7131
Electrical Cable Nipple

014307131
1S-2294: RNCC: 3 | RNVC: 2

2 May 1996

5975-01-430-7133
Electrical Conduit Adapter

014307133
5N-9117: RNCC: 3 | RNVC: 2

2 May 1996

5975-01-432-4405
Electrical Equipment Cabinet

014324405
21-10273: RNCC: 3 | RNVC: 2
589-6953092: RNCC: D | RNVC: 9

6 Jun 1996

5975-01-432-5752
Electrical Equipment Mounting Base

014325752
050350110117: RNCC: 3 | RNVC: 2

10 Jun 1996

5975-01-445-6260
Stuffing Tube

014456260
13229E0753-1: RNCC: 3 | RNVC: 2
2682: RNCC: 5 | RNVC: 2

9 Jun 1997

5975-01-448-2098
Electrical-Electronic Equipment Panel

014482098
ADTS405-1729-70-M0: RNCC: 3 | RNVC: 2

25 Aug 1997

5975-01-392-6121
Flexible Metal Conduit Assembly

013926121
5909558-11: RNCC: 1 | RNVC: 2
229385-D10343: RNCC: 3 | RNVC: 2
759-245-05: RNCC: 5 | RNVC: 2
759-245-05: RNCC: 5 | RNVC: 9

1 Jul 1994

5975-01-450-6278
Electrical Tie Down Mounting Base

014506278
ABM2S-S6-D: RNCC: 3 | RNVC: 2
12H4793: RNCC: 5 | RNVC: 2
64.36.00.033: RNCC: 5 | RNVC: 2
86-1326374-2: RNCC: 5 | RNVC: 2
64.36.00.033: RNCC: 5 | RNVC: 9
86-1326374: RNCC: D | RNVC: 9

17 Nov 1997

5975-01-450-5607
Blank Panel

014505607
A3192638-3: RNCC: 3 | RNVC: 2

14 Nov 1997

5975-01-450-7350
Electrical Equipment Leg

014507350
P.893657: RNCC: 3 | RNVC: 9
P.893657: RNCC: C | RNVC: 1

20 Nov 1997

5975-01-450-2561
Electronic Junction Rack

014502561
8027520-1-06: RNCC: 3 | RNVC: 2
ARMS-N06: RNCC: 5 | RNVC: 9
ARMS: RNCC: D | RNVC: 9

31 Oct 1997

5975-01-452-1722
Electrical-Electronic Equipment Panel

014521722
106201-40: RNCC: 3 | RNVC: 2

20 Jan 1998

5975-01-453-5917
Electrical Nonmetallic Conduit Assembly

014535917
200AS349-040BH04054FA132: RNCC: 1 | RNVC: 2
200AS349-040BH04054FA132: RNCC: 3 | RNVC: 2
200AS349-040BH04054FA132: RNCC: 5 | RNVC: 2
200AS349-040BH04054FA132: RNCC: 5 | RNVC: 2

5 Mar 1998

5975-01-456-2624
Flexible Metal Conduit Assembly

014562624
227636-DL0000: RNCC: 3 | RNVC: 2

8 Jun 1998

5975-01-456-4366
Flexible Metal Conduit Assembly

014564366
23A02336-80: RNCC: 3 | RNVC: 2
3260AS458: RNCC: 7 | RNVC: 2

12 Jun 1998

5975-01-456-8553
Flexible Nonmetallic Conduit

014568553
7124491: RNCC: 3 | RNVC: 2
7124491: RNCC: 5 | RNVC: 9

29 Jun 1998

5975-01-457-5094
Electrical Fitting Mounting Base

014575094
1230C81G01: RNCC: 3 | RNVC: 2

24 Jul 1998

5975-01-457-6159
Branched Electrical Power Cable Assembly

014576159
712HL178NF2532-1: RNCC: 3 | RNVC: 2

29 Jul 1998

5975-01-458-8008
Electrical Cable Protector

014588008
12976352: RNCC: 3 | RNVC: 2

10 Sep 1998

5975-01-461-6538
Junction Box

014616538
7325398G001: RNCC: 3 | RNVC: 2
7325398G1: RNCC: 5 | RNVC: 2

22 Dec 1998

5975-01-461-2006
Electronic Junction Rack

014612006
CTJ-3B-12: RNCC: 3 | RNVC: 2
CTJ--EB-12: RNCC: 5 | RNVC: 9
11467243-8: RNCC: 7 | RNVC: 2

3 Dec 1998

5975-01-461-7606
Stuffing Tube

014617606
M24235/15-011: RNCC: 2 | RNVC: 2
MIL-S-24235/15B: RNCC: 4 | RNVC: 1

31 Dec 1998

5975-01-461-7618
Stuffing Tube

014617618
M24235/15-016: RNCC: 2 | RNVC: 2
MIL-S-24235/15B: RNCC: 4 | RNVC: 1
M2435/15-016: RNCC: 5 | RNVC: 9

31 Dec 1998

5975-01-462-2057
Stuffing Tube Adapter

014622057
M24235/15-001: RNCC: 2 | RNVC: 2
NIL-S-24235: RNCC: 4 | RNVC: 1

26 Jan 1999

5975-01-462-3479
Electrical-Electronic Equipment Chassis

014623479
H274A032-10: RNCC: 3 | RNVC: 2

29 Jan 1999

5975-01-462-7223
Stuffing Tube

014627223
1945.3 SIZE C TYPE 66: RNCC: 3 | RNVC: 2
9000S620274269-113: RNCC: 5 | RNVC: 2
9000S620274269: RNCC: 5 | RNVC: 2
1945.3 SIZE A TYPE 66: RNCC: 5 | RNVC: 9

13 Feb 1999

5975-01-462-7215
Stuffing Tube

014627215
1945.8 SIZE J TYPE 66: RNCC: 3 | RNVC: 2
9000S620274269: RNCC: 5 | RNVC: 9
1945.8 SIZE A TYPE 66: RNCC: 5 | RNVC: 9
9000S620274269-118: RNCC: 5 | RNVC: 9

13 Feb 1999

5975-01-462-7227
Stuffing Tube

014627227
1945.12 SIZE N TYPE 66: RNCC: 3 | RNVC: 2
9000S620274269: RNCC: 5 | RNVC: 2
9000S620274269-122: RNCC: 5 | RNVC: 2
1945.12 SIZE A TYPE 66: RNCC: 5 | RNVC: 9

13 Feb 1999

5975-01-462-7327
Stuffing Tube

014627327
1990.2 SIZE B TYPE 67: RNCC: 3 | RNVC: 2
9000S620274269: RNCC: 5 | RNVC: 2
9000S620274269-142: RNCC: 5 | RNVC: 2
1990.2 SIZE A TYPE 67: RNCC: 5 | RNVC: 9

16 Feb 1999

5975-01-285-0660
Electrical Conduit Coupling Nut

012850660
11300-B-18: RNCC: 3 | RNVC: 1
11300-B-18: RNCC: 3 | RNVC: 9
B-137D164JX2: RNCC: 5 | RNVC: 9

6 Sep 1988

5975-01-285-7319
Electrical Conduit Adapter

012857319
000214261613: RNCC: 3 | RNVC: 2
9-333-101424: RNCC: 5 | RNVC: 2

20 Sep 1988

5975-01-287-5523
Electrical Wall Plate

012875523
86101: RNCC: 3 | RNVC: 9
2801-JI: RNCC: 5 | RNVC: 9
175-1 IV: RNCC: 5 | RNVC: 9
J92071: RNCC: 5 | RNVC: 9
P0-1-I: RNCC: 5 | RNVC: 9
SPO1I: RNCC: 5 | RNVC: 9

23 Oct 1988

5975-01-287-5347
Conduit Outlet

012875347
8905793: RNCC: 3 | RNVC: 2
849183: RNCC: 5 | RNVC: 9

23 Oct 1988

5975-01-291-9328
Cable Terminal Chamber

012919328
200SGL1061: RNCC: 3 | RNVC: 9
200SGL1061: RNCC: 5 | RNVC: 2

7 Jan 1989

5975-01-296-0632
Electrical Conductor Bushing

012960632
74B878001-131: RNCC: 1 | RNVC: 2
CT0904-131: RNCC: 3 | RNVC: 2
74B878001-131: RNCC: 5 | RNVC: 2
10134274: RNCC: 6 | RNVC: 9

16 Mar 1989

5975-01-296-6061
Fanning Strip

012966061
7517533-10: RNCC: 3 | RNVC: 9
7517533-10: RNCC: 5 | RNVC: 9

23 Mar 1989

5975-01-296-6059
Fanning Strip

012966059
7517533-08: RNCC: 3 | RNVC: 9
7517533-08: RNCC: 5 | RNVC: 9

23 Mar 1989

5975-01-296-6078
Blank Panel

012966078
6604232: RNCC: 3 | RNVC: 2
6604232: RNCC: 5 | RNVC: 9

23 Mar 1989

5975-01-296-7090
Fanning Strip

012967090
7517533-02: RNCC: 3 | RNVC: 9
7517533-02: RNCC: 5 | RNVC: 9

23 Mar 1989

5975-01-294-2133
Cable Hanger

012942133
101-107-399: RNCC: 3 | RNVC: 2

13 Feb 1989

5975-01-296-7104
Flexible Metal Conduit Assembly

012967104
251020-01750: RNCC: 3 | RNVC: 1
750-011NF32-175: RNCC: 3 | RNVC: 1
200188-DI1750: RNCC: 3 | RNVC: 1
10250675-93: RNCC: 3 | RNVC: 2

23 Mar 1989

5975-01-296-7907
Fanning Strip

012967907
7517533-26: RNCC: 3 | RNVC: 9
7517533-26: RNCC: 5 | RNVC: 9

24 Mar 1989

5975-01-297-3870
Electrical Conduit Adapter

012973870
10250710-20: RNCC: 3 | RNVC: 2
100235-0020: RNCC: 5 | RNVC: 9
G63164-20: RNCC: 5 | RNVC: 9
100039-FB6200: RNCC: 5 | RNVC: 9

2 Apr 1989

5975-01-297-4925
Electrical Components Tie Down Strap

012974925
SV805620-1: RNCC: 3 | RNVC: 2
S73506-16: RNCC: 5 | RNVC: 9

4 Apr 1989

5975-01-297-6131
Electrical Conduit Adapter

012976131
100235-0038: RNCC: 3 | RNVC: 2
G63164-38: RNCC: 5 | RNVC: 9
100207-FB6200: RNCC: 5 | RNVC: 9
10250710-38: RNCC: 7 | RNVC: 2

4 Apr 1989

5975-01-302-8285
Flexible Metal Conduit Assembly

013028285
750-011NF16-54: RNCC: 3 | RNVC: 2
200206-DI0540: RNCC: 5 | RNVC: 2
10250675-62: RNCC: 7 | RNVC: 2

21 Jun 1989

5975-01-299-2468
Electrical Cable Protector

012992468
HT 5/8-N-B-100: RNCC: 3 | RNVC: 2
HT 5/8-N-B: RNCC: 5 | RNVC: 1
S-010: RNCC: 5 | RNVC: 9

28 Apr 1989

5975-01-301-0428
Interior Cable Rack

013010428
60244-40454: RNCC: 3 | RNVC: 2

24 May 1989

5975-01-301-8602
Electrical Conduit Elbow

013018602
C196AX2321DA: RNCC: 3 | RNVC: 2
3AF306XA2321DE: RNCC: 3 | RNVC: 2
151479-2321: RNCC: 5 | RNVC: 9
3AF306XC2321DA: RNCC: 5 | RNVC: 9
3AD306XC2321DE: RNCC: 5 | RNVC: 9
K15K0021-108: RNCC: 5 | RNVC: 9

4 Jun 1989

5975-01-304-1716
Cable Hanger

013041716
1052S/S: RNCC: 3 | RNVC: 2
101-107-072: RNCC: 3 | RNVC: 2
2060SS: RNCC: 5 | RNVC: 2
5975PL1293600: RNCC: 6 | RNVC: 9

13 Jul 1989

5975-01-313-6344
Electrical Nonmetallic Conduit Assembly

013136344
CA-00114: RNCC: 3 | RNVC: 2
CA-00114: RNCC: 5 | RNVC: 9
1532AS586: RNCC: 7 | RNVC: 2

12 Jan 1990

5975-01-313-8181
Electrical Conduit Adapter

013138181
100235-0028: RNCC: 3 | RNVC: 2
G63164-28: RNCC: 3 | RNVC: 2
100210-FB6200: RNCC: 3 | RNVC: 2
10250710-28: RNCC: 7 | RNVC: 2

18 Jan 1990

5975-01-317-5650
Junction Box Cover

013175650
8611387-81: RNCC: 3 | RNVC: 2
GFRWPVFS: RNCC: 5 | RNVC: 9
8611387-81: RNCC: 5 | RNVC: 9
30538: RNCC: 5 | RNVC: 9

1 Apr 1990

5975-01-317-1619
Electrical-Electronic Equipment Chassis

013171619
DAA3383A204-009: RNCC: 3 | RNVC: 2

24 Mar 1990

5975-01-318-9256
Junction Box

013189256
A1412CHNF: RNCC: 3 | RNVC: 2

27 Apr 1990

5975-01-319-2688
Electrical Components Tie Down Strap

013192688
52070: RNCC: 3 | RNVC: 2
NT-340H: RNCC: 5 | RNVC: 2
L18337: RNCC: 5 | RNVC: 9

4 May 1990

5975-01-320-2564
Electrical Nonmetallic Conduit Assembly

013202564
5188105-151: RNCC: 1 | RNVC: 2
759-192-151: RNCC: 3 | RNVC: 2
206-151-DI0560: RNCC: 3 | RNVC: 2

23 May 1990

5975-01-320-2560
Electrical Conduit Adapter

013202560
100235-0017: RNCC: 3 | RNVC: 2
G63164-17: RNCC: 5 | RNVC: 2
100026-FB6200: RNCC: 5 | RNVC: 2
10250710-17: RNCC: 7 | RNVC: 2

23 May 1990

5975-01-321-3292
Junction Box Cover

013213292
T2048EJ: RNCC: 3 | RNVC: 2

15 Jun 1990

5975-01-324-5710
Wire Strand Hanger

013245710
8394947-501: RNCC: 3 | RNVC: 2
8394947: RNCC: 5 | RNVC: 9

19 Aug 1990

5975-01-324-7202
Ground Rod

013247202
6258: RNCC: 3 | RNVC: 2

22 Aug 1990

5975-01-352-0285
Stuffing Tube

013520285
NCGB1232: RNCC: 3 | RNVC: 2
NCGB1232-SG: RNCC: 5 | RNVC: 9
13229E0738-3: RNCC: 7 | RNVC: 2

18 Jan 1992

5975-01-353-4843
Electrical Conduit Adapter

013534843
6323440-1: RNCC: 3 | RNVC: 2
1046-3: RNCC: 5 | RNVC: 9
1046-3: RNCC: C | RNVC: 1

12 Feb 1992

5975-01-354-7378
Fanning Strip

013547378
3332877-1: RNCC: 3 | RNVC: 2
3332877-1: RNCC: 5 | RNVC: 2

5 Mar 1992

5975-01-355-7891
Stuffing Tube

013557891
NCGB1231-SG: RNCC: 3 | RNVC: 2
13229E0738-6: RNCC: 7 | RNVC: 2

24 Mar 1992

5975-01-355-9666
Electrical Equipment Mounting Base

013559666
UT21405-80: RNCC: 3 | RNVC: 2
GM500BD2: RNCC: 5 | RNVC: 2

27 Mar 1992

5975-01-360-4323
Blank Panel

013604323
9M381B2E: RNCC: 3 | RNVC: 2
9M381B2E: RNCC: 3 | RNVC: 9

24 Jun 1992

5975-01-362-3181
Electrical Components Tie Down Strap

013623181
SST1MM: RNCC: 3 | RNVC: 2

4 Aug 1992

5975-01-362-7149
Electrical Equipment Rack

013627149
CTJ-3A-05: RNCC: 3 | RNVC: 2

14 Aug 1992

5975-01-367-8657
Electrical Conduit Coupling

013678657
E940N: RNCC: 3 | RNVC: 2
E940N: RNCC: 5 | RNVC: 9
00034481061106: RNCC: 5 | RNVC: 9

20 Nov 1992

5975-01-367-7565
Electrical Tie Down Mounting Base

013677565
STBP19H1: RNCC: 3 | RNVC: 2
STBP19H1: RNCC: 5 | RNVC: 9

18 Nov 1992

5975-01-371-8284
Electrical Components Tie Down Strap

013718284
20941: RNCC: 1 | RNVC: 2
PLC2S-S6-C0: RNCC: 3 | RNVC: 2
71-2739921-1: RNCC: 5 | RNVC: 2
PLC2S-S6-C0: RNCC: 5 | RNVC: 2

24 Feb 1993

5975-01-376-1926
Electrical Cable Protector

013761926
12382143: RNCC: 3 | RNVC: 2

28 May 1993

5975-01-381-2375
Electrical-Electronic Equipment Chassis

013812375
34-081250-02: RNCC: 3 | RNVC: 2
34-081250-02: RNCC: 3 | RNVC: 9

12 Oct 1993

5975-01-385-7650
Flexible Nonmetallic Conduit

013857650
HCTE-1000-0-SP: RNCC: 3 | RNVC: 2
HCTE-1000-0: RNCC: 5 | RNVC: 9

18 Jan 1994

5975-01-383-6489
Electrical Equipment Foot

013836489
1328AS226: RNCC: 3 | RNVC: 2

27 Nov 1993

5975-01-385-9692
Electrical Equipment Shelf

013859692
12383932: RNCC: 3 | RNVC: 2

25 Jan 1994

5975-01-387-4448
Flexible Metal Conduit Assembly

013874448
57350-16FTOIN: RNCC: 3 | RNVC: 2
57350-16: RNCC: 5 | RNVC: 9

5 Mar 1994

5975-01-387-4529
Cable Strain Relief Bushing

013874529
5267493: RNCC: 3 | RNVC: 2
9004420: RNCC: 5 | RNVC: 9

5 Mar 1994

5975-01-387-6253
Cable Insert Special Block

013876253
RM 20/15: RNCC: 3 | RNVC: 2
RM 20/15: RNCC: 5 | RNVC: 9

9 Mar 1994

5975-01-391-1964
Junction Box

013911964
3113AS800-1: RNCC: 3 | RNVC: 2

7 Jun 1994

5975-01-326-1681
Ground Rod

013261681
1135515G1: RNCC: 3 | RNVC: 9
A-A-55804: RNCC: 4 | RNVC: 1
W-R-550A: RNCC: 5 | RNVC: 9

20 Sep 1990

5975-01-326-1294
Wire Strand Hanger Support And Safety Strap

013261294
11468631: RNCC: 3 | RNVC: 2

18 Sep 1990

5975-01-326-6511
Cable Shield Adapter

013266511
GA/CSGA-D/NPT: RNCC: 3 | RNVC: 2
SEEPA-NF-D-A: RNCC: 5 | RNVC: 2
CSGA-D/NPT: RNCC: 5 | RNVC: 2
CSGA-D/NPT: RNCC: 5 | RNVC: 9

28 Sep 1990

5975-01-327-0018
Electrical Bonding Ring

013270018
260403-2: RNCC: 3 | RNVC: 2

5 Oct 1990

5975-01-334-0999
Interconnecting Box

013340999
70550-02128-043: RNCC: 1 | RNVC: 2
AW2876-43: RNCC: 3 | RNVC: 2
AW2876-043: RNCC: 3 | RNVC: 9
70550-02128-041: RNCC: E | RNVC: 8
AW2876: RNCC: E | RNVC: 8

15 Feb 1991

5975-01-335-1963
Electrical Equipment Cabinet

013351963
A16H1206ALLP: RNCC: 3 | RNVC: 2

6 Mar 1991

5975-01-336-5447
Blank Panel

013365447
9905-UH60-007: RNCC: 3 | RNVC: 2

27 Mar 1991

5975-01-337-9439
Junction Box

013379439
CV 863: RNCC: 3 | RNVC: 9

24 Apr 1991

5975-01-339-7469
Electrical Equipment Mounting Base

013397469
70600-81842-102: RNCC: 1 | RNVC: 2
4538: RNCC: 3 | RNVC: 2

29 May 1991

5975-01-341-3151
Rigid Metal Conduit Assembly

013413151
23A00025: RNCC: 3 | RNVC: 2
253112: RNCC: 5 | RNVC: 2

27 Jun 1991

5975-01-392-7347
Electrical-Electronic Equipment Chassis

013927347
MZR052: RNCC: 3 | RNVC: 2
C005975-02: RNCC: 7 | RNVC: 2

6 Jul 1994

5975-01-407-5585
Switch Terminal Cover

014075585
9325C08-1583-01: RNCC: 3 | RNVC: 2
5728B: RNCC: 3 | RNVC: 9

31 Jan 1995

5975-01-410-7647
Flexible Nonmetallic Conduit

014107647
27214: RNCC: 3 | RNVC: 2
68764-R: RNCC: 5 | RNVC: 2
NGF1000: RNCC: 5 | RNVC: 9
1709AS886-06: RNCC: 7 | RNVC: 2
1709AS886: RNCC: D | RNVC: 9

11 Mar 1995

5975-01-412-5780
Electrical Cable Splice Protector

014125780
12932263: RNCC: 3 | RNVC: 2

22 Apr 1995

5975-01-414-6995
Electrical Wall Plate

014146995
4510D: RNCC: 3 | RNVC: 2
GFRWPV: RNCC: 5 | RNVC: 9

13 Jun 1995

5975-01-420-2605
Electrical Components Tie Down Strap

014202605
44407: RNCC: 3 | RNVC: 2
YB-24473: RNCC: 5 | RNVC: 9

12 Oct 1995

5975-01-421-5902
Nonmetallic Raceway

014215902
FS4X1.5LG6/C4LG6: RNCC: 3 | RNVC: 2
S4X1.5LG6: RNCC: 5 | RNVC: 9
FS4X1.5LG6: RNCC: 5 | RNVC: 9

10 Nov 1995

5975-01-422-2789
Cable Hanger

014222789
101-107-316: RNCC: 3 | RNVC: 2
5975PL1285673: RNCC: 6 | RNVC: 9

28 Nov 1995

5975-01-428-9998
Electrical Equipment Mounting Base

014289998
800941-1: RNCC: 3 | RNVC: 2
MT-7077: RNCC: 5 | RNVC: 1
800941: RNCC: 5 | RNVC: 2
800941-0001: RNCC: 5 | RNVC: 2

4 Apr 1996

5975-01-431-2113
Electrical-Electronic Equipment Chassis

014312113
410 113 111: RNCC: 3 | RNVC: 2
117360003: RNCC: 5 | RNVC: 9
0821191-01: RNCC: 5 | RNVC: 9
117360003: RNCC: 5 | RNVC: 9
117360003: RNCC: 5 | RNVC: 9

9 May 1996

5975-01-432-4124
Conduit Outlet

014324124
11B254101: RNCC: 3 | RNVC: 1
5387-0: RNCC: 3 | RNVC: 2

5 Jun 1996

5975-01-438-0428
Flexible Nonmetallic Conduit

014380428
57350-85FT 0IN: RNCC: 3 | RNVC: 2
57350-85: RNCC: 5 | RNVC: 9

30 Oct 1996

5975-01-432-4122
Electrical Conduit Elbow

014324122
3442: RNCC: 3 | RNVC: 2
11B254120: RNCC: 3 | RNVC: 9
3442: RNCC: 5 | RNVC: 9

5 Jun 1996

5975-01-434-1760
Electrical Nonmetallic Conduit Assembly

014341760
R58HB12G16Y012C: RNCC: 3 | RNVC: 2
R58HB12G16Y012C: RNCC: 5 | RNVC: 2
R58HB12G16Y012C: RNCC: 5 | RNVC: 2
R58HB12G16Y012C: RNCC: 5 | RNVC: 9
R58HB12G16Y012C: RNCC: 7 | RNVC: 2

22 Jul 1996

5975-01-434-7981
Junction Box

014347981
153B1010G01: RNCC: 3 | RNVC: 2

7 Aug 1996

5975-01-435-1449
Flexible Metal Conduit

014351449
M24758/1-04: RNCC: 2 | RNVC: 2
MIL-PRF-24758: RNCC: 4 | RNVC: 1
MIL-C-24758/1: RNCC: 5 | RNVC: 9

15 Aug 1996

5975-01-448-4534
Cable Hanger

014484534
101-107-458: RNCC: 3 | RNVC: 2
CRES 316 2.5 IN. LG BAR: RNCC: 3 | RNVC: 2

29 Aug 1997

5975-01-449-3487
Electrical Conduit Coupling

014493487
000 159 23 25: RNCC: 3 | RNVC: 2
0001592325: RNCC: 5 | RNVC: 2
0001592325: RNCC: 5 | RNVC: 2
000 159 23 25: RNCC: 5 | RNVC: 2

28 Sep 1997

5975-01-448-0618
Electrical-Electronic Equipment Chassis

014480618
A3103997: RNCC: 3 | RNVC: 2

20 Aug 1997

5975-01-453-3994
Electrical Nonmetallic Conduit Assembly

014533994
1328AS620: RNCC: 3 | RNVC: 2
1328AS620-4: RNCC: 5 | RNVC: 2

27 Feb 1998

5975-01-455-1287
Electronic Equipment Mounting Tray

014551287
3036AS380: RNCC: 3 | RNVC: 2
3036AS380: RNCC: 5 | RNVC: 1

23 Apr 1998

5975-01-454-4721
Electrical Cable Protector

014544721
585-6405226-42: RNCC: 3 | RNVC: 2
211075130: RNCC: 3 | RNVC: 2

1 Apr 1998

5975-01-449-7245
Electrical Equipment Mounting Base

014497245
822-0958-001: RNCC: 3 | RNVC: 2
822-0958-001: RNCC: 5 | RNVC: 2

10 Oct 1997

5975-01-461-7571
Stuffing Tube

014617571
M24235/15-003: RNCC: 2 | RNVC: 2
MIL-S-24235/15B: RNCC: 4 | RNVC: 1

31 Dec 1998

5975-01-461-7610
Stuffing Tube

014617610
M24235/15-013: RNCC: 2 | RNVC: 2
MIL-S-24235/15B: RNCC: 4 | RNVC: 1

31 Dec 1998

5975-01-461-7593
Stuffing Tube

014617593
M24235/15-008: RNCC: 2 | RNVC: 2
MIL-S-24235/15B: RNCC: 4 | RNVC: 1

31 Dec 1998

5975-01-461-9514
Rigid Metal Conduit

014619514
12437388: RNCC: 3 | RNVC: 2

13 Jan 1999

5975-01-462-0626
Electrical Nonmetallic Conduit Assembly

014620626
200AS349-040JG10040GA094: RNCC: 3 | RNVC: 2
200AS349-040JG10040GA094: RNCC: 5 | RNVC: 2

20 Jan 1999

5975-01-462-1789
Stuffing Tube

014621789
MIL-S-24235: RNCC: 4 | RNVC: 1
M24235/14-130: RNCC: 5 | RNVC: 2
RO0036B: RNCC: 5 | RNVC: 9
RO0036A: RNCC: 5 | RNVC: 9
RO0036: RNCC: 5 | RNVC: 9

25 Jan 1999

5975-01-462-7221
Stuffing Tube

014627221
1945.2 SIZE B TYPE 66: RNCC: 3 | RNVC: 2
1945.2 SIZE A TYPE 66: RNCC: 5 | RNVC: 9
9000S620274269: RNCC: 5 | RNVC: 9
9000S620274269-112: RNCC: 5 | RNVC: 9

13 Feb 1999

5975-01-462-7500
Electrical Conduit Adapter

014627500
712S214NF2424-2: RNCC: 3 | RNVC: 2
GA801UR1C24242: RNCC: 5 | RNVC: 2

17 Feb 1999

5975-01-299-6326
Junction Box

012996326
10945044: RNCC: 3 | RNVC: 2

4 May 1989

5975-01-342-8328
Cable Hanger

013428328
302-6674620PC11: RNCC: 3 | RNVC: 1
185669TY3-A-9: RNCC: 5 | RNVC: 1

31 Jul 1991

5975-01-436-2748
Electrical Conductor Bushing

014362748
1741AS730-1: RNCC: 3 | RNVC: 2
1741AS730-1: RNCC: 7 | RNVC: 2

16 Sep 1996

5975-01-444-1974
Metallic Raceway Assembly

014441974
901-011-212-101: RNCC: 3 | RNVC: 2

1 May 1997

5975-01-444-3424
Electrical Conduit Coupling

014443424
025-09412-000: RNCC: 3 | RNVC: 2
376-80783-000A ITEM 126: RNCC: 5 | RNVC: 9
025-09412: RNCC: 5 | RNVC: 9
376-80783-000: RNCC: D | RNVC: 9

5 May 1997

5975-01-444-8280
Flexible Nonmetallic Conduit

014448280
63A155251P49: RNCC: 3 | RNVC: 2
120-100-1-1-20BE: RNCC: 5 | RNVC: 2
E22001A-000000: RNCC: 5 | RNVC: 2

16 May 1997

5975-01-447-9185
Electrical Equipment Shelf

014479185
A3104088: RNCC: 3 | RNVC: 2
A3014011: RNCC: 5 | RNVC: 2

16 Aug 1997

5975-01-283-6398
Electrical-Electronic Equipment Panel

012836398
25472-1: RNCC: 3 | RNVC: 2

10 Aug 1988

5975-01-285-0223
Junction Box

012850223
CU-2100B: RNCC: 3 | RNVC: 2

4 Sep 1988

5975-01-285-4621
Flexible Metal Conduit Assembly

012854621
23A00974-00010: RNCC: 3 | RNVC: 2
CA-00134-10: RNCC: 3 | RNVC: 2
252485-0010: RNCC: 5 | RNVC: 2
SCD51990783-010: RNCC: 5 | RNVC: 9
CA-00134-10: RNCC: 5 | RNVC: 9

14 Sep 1988

5975-01-285-0301
Electrical-Electronic Equipment Panel

012850301
7222825-01: RNCC: 3 | RNVC: 2

4 Sep 1988

5975-01-285-0581
Electrical Conductor Bushing

012850581
407-43613-2: RNCC: 3 | RNVC: 2

5 Sep 1988

5975-01-285-7321
Electrical Conduit Adapter

012857321
000214261611: RNCC: 3 | RNVC: 2
9-333-101464: RNCC: 5 | RNVC: 1

20 Sep 1988

5975-01-285-7320
Electrical Conduit Adapter

012857320
000214261311: RNCC: 3 | RNVC: 2
9-333-101462: RNCC: 5 | RNVC: 2

20 Sep 1988

5975-01-287-9942
Wireway

012879942
F44L36: RNCC: 3 | RNVC: 2

30 Oct 1988

5975-01-292-5104
Electrical Box Connector

012925104
J1212M212A75-1F-10N: RNCC: 3 | RNVC: 2
GH805FW100: RNCC: 7 | RNVC: 2

18 Jan 1989

5975-01-294-7403
Cable Hanger

012947403
11464625: RNCC: 3 | RNVC: 2
11464625: RNCC: 5 | RNVC: 1

22 Feb 1989

5975-01-296-7094
Fanning Strip

012967094
7517533-22: RNCC: 3 | RNVC: 9
7517533-22: RNCC: 5 | RNVC: 9

23 Mar 1989

5975-01-296-7912
Fanning Strip

012967912
7517533-32: RNCC: 3 | RNVC: 2

24 Mar 1989

5975-01-299-2177
Cable Terminal Chamber

012992177
1288002: RNCC: 3 | RNVC: 9
1288002: RNCC: C | RNVC: 1

28 Apr 1989

5975-01-299-4309
Electrical Nonmetallic Conduit Assembly

012994309
R58HB08G36A042: RNCC: 3 | RNVC: 2

1 May 1989

5975-01-301-8611
Electrical Nonmetallic Conduit Assembly

013018611
R58HB04C34A108: RNCC: 3 | RNVC: 2
R58HB04C34A108: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9
R58HB: RNCC: 7 | RNVC: 1

4 Jun 1989

5975-01-305-0775
Electrical Conduit Adapter

013050775
100235-0040: RNCC: 3 | RNVC: 2
CH09-0340-440: RNCC: 5 | RNVC: 9
10250710-40: RNCC: 7 | RNVC: 2

1 Aug 1989

5975-01-308-5187
Electrical Conduit Adapter

013085187
A6107S25044N003: RNCC: 3 | RNVC: 2
SE20GR1744AL4: RNCC: 5 | RNVC: 2
4700736-027: RNCC: 7 | RNVC: 9

29 Sep 1989

5975-01-308-5059
Electrical Box Connector

013085059
CG625OS: RNCC: 3 | RNVC: 2
CG6250S: RNCC: 3 | RNVC: 2
CG6250S: RNCC: 5 | RNVC: 2
CG-6250S: RNCC: 5 | RNVC: 9
HW-E0247-032: RNCC: 7 | RNVC: 2
2552: RNCC: C | RNVC: 1

29 Sep 1989

5975-01-308-7018
Electrical Equipment Shelf

013087018
2017: RNCC: 3 | RNVC: 2

3 Oct 1989

5975-01-311-8622
Strain Electrical Conductor Clamp

013118622
9-61-0010-00: RNCC: 3 | RNVC: 2

6 Dec 1989

5975-01-313-4766
Electrical Conduit Adapter

013134766
DBZM-5824: RNCC: 3 | RNVC: 2
CG128150: RNCC: 5 | RNVC: 9
1603AS274: RNCC: 7 | RNVC: 1
CG128150: RNCC: C | RNVC: 1

10 Jan 1990

5975-01-314-4522
Electrical Conduit Adapter

013144522
GR2126-EM06: RNCC: 3 | RNVC: 1

30 Jan 1990

5975-01-315-8948
Electrical-Electronic Equipment Chassis

013158948
77-052901-01: RNCC: 3 | RNVC: 2
77-052901-01: RNCC: 5 | RNVC: 2
77-052901-01: RNCC: 5 | RNVC: 9
77-052901-01: RNCC: 5 | RNVC: 9
77-052901-01: RNCC: 5 | RNVC: 9

26 Feb 1990

5975-01-318-4877
Electrical Grounding Plate

013184877
6166788: RNCC: 3 | RNVC: 2

19 Apr 1990

5975-01-319-5583
Electrical Conduit Adapter

013195583
2613235-8: RNCC: 3 | RNVC: 2
S1816C2502-8: RNCC: 5 | RNVC: 2

10 May 1990

5975-01-315-4471
Electrical Cable Protector

013154471
12370530: RNCC: 3 | RNVC: 2
12353406: RNCC: 5 | RNVC: 9

16 Feb 1990

5975-01-320-1344
Flexible Metal Conduit

013201344
10-90657-74: RNCC: 3 | RNVC: 2

19 May 1990

5975-01-323-1155
Fanning Strip

013231155
74A885647-2003: RNCC: 3 | RNVC: 9
74A885647-2003: RNCC: 5 | RNVC: 2
10134271: RNCC: 6 | RNVC: 9

21 Jul 1990

5975-01-324-9955
Electrical Box Connector

013249955
2692: RNCC: 3 | RNVC: 2
6A418: RNCC: 5 | RNVC: 9

25 Aug 1990

5975-01-342-8323
Cable Hanger

013428323
302-6693690PC29: RNCC: 3 | RNVC: 1
185669TY3,A-16: RNCC: 5 | RNVC: 1

31 Jul 1991

5975-01-343-2233
Cable Tray

013432233
G382653-1: RNCC: 3 | RNVC: 2
G382653-1: RNCC: 5 | RNVC: 2
G382653-1: RNCC: 5 | RNVC: 9

8 Aug 1991

5975-01-355-0106
Strain Electrical Conductor Clamp

013550106
540-931-001-000: RNCC: 3 | RNVC: 2
540-931-001: RNCC: 5 | RNVC: 9

10 Mar 1992

5975-01-353-6481
Electrical Box Connector

013536481
2540-4: RNCC: 3 | RNVC: 2
2540-4: RNCC: 5 | RNVC: 2
2540-4: RNCC: 5 | RNVC: 2
7-364-001770: RNCC: 5 | RNVC: 9
2HG333: RNCC: C | RNVC: 1

14 Feb 1992

5975-01-345-3207
Conduit Outlet

013453207
420AA001N1001: RNCC: 3 | RNVC: 2
1129E08 ITEM 16: RNCC: 5 | RNVC: 2

17 Sep 1991

5975-01-353-2545
Weather Proof Box

013532545
WB: RNCC: 3 | RNVC: 2
WB: RNCC: 5 | RNVC: 9

8 Feb 1992

5975-01-348-2247
Ground Rod

013482247
A3157032-001: RNCC: 3 | RNVC: 2
A3157032-001: RNCC: 5 | RNVC: 2
A3157032-001: RNCC: 5 | RNVC: 9
A3157032-001: RNCC: 5 | RNVC: 9
A3157032-001: RNCC: 5 | RNVC: 9

6 Nov 1991

5975-01-350-4650
Electronic Junction Rack

013504650
M81714/5-10: RNCC: 2 | RNVC: 2
MIL-T-81714: RNCC: 4 | RNVC: 1

17 Dec 1991

5975-01-350-2050
Junction Box

013502050
527A: RNCC: 3 | RNVC: 2
525A: RNCC: 5 | RNVC: 9

12 Dec 1991

5975-01-358-7916
Electrical Components Tie Down Strap

013587916
PLT1M-M69: RNCC: 3 | RNVC: 2

21 May 1992

5975-01-361-8080
Flexible Nonmetallic Conduit

013618080
M1883004: RNCC: 3 | RNVC: 2
M1883004: RNCC: 3 | RNVC: 2
M1883004: RNCC: 5 | RNVC: 2
67587-R: RNCC: 5 | RNVC: 9

26 Jul 1992

5975-01-362-8230
Electrical Conduit Adapter

013628230
101008-21: RNCC: 3 | RNVC: 2
10250710-21: RNCC: 5 | RNVC: 9

15 Aug 1992

5975-01-368-1786
Electrical-Electronic Equipment Chassis

013681786
0000-7157-00: RNCC: 3 | RNVC: 2

27 Nov 1992

5975-01-370-2628
Electrical Components Tie Down Strap

013702628
SAE-AS23190: RNCC: 3 | RNVC: 1
MS3367-5-6: RNCC: 3 | RNVC: 2
TY524M-6: RNCC: 3 | RNVC: 2
MS3367-5-6: RNCC: 5 | RNVC: 9

16 Jan 1993

5975-01-370-3519
Electrical Equipment Mounting Base

013703519
93023-2: RNCC: 3 | RNVC: 2
93023-2: RNCC: 5 | RNVC: 2

21 Jan 1993

5975-01-372-2388
Electrical Equipment Mounting Base

013722388
169944-01: RNCC: 3 | RNVC: 2
169944-01: RNCC: 5 | RNVC: 9
169944: RNCC: 7 | RNVC: 2

4 Mar 1993

5975-01-379-2296
Electrical Components Tie Down Strap

013792296
PLT1.5I-C: RNCC: 3 | RNVC: 2
10134316: RNCC: 6 | RNVC: 9

29 Aug 1993

5975-01-379-9841
Flexible Metal Conduit Assembly

013799841
57350-30FT 0IN: RNCC: 3 | RNVC: 2
POD-57350-30: RNCC: 5 | RNVC: 2

12 Sep 1993

5975-01-382-7318
Electrical Conduit Union

013827318
P050N-BKA: RNCC: 3 | RNVC: 2
P050N-BK: RNCC: 3 | RNVC: 9
25826-1: RNCC: 7 | RNVC: 2
25826-1: RNCC: 7 | RNVC: 9
25826-1: RNCC: 7 | RNVC: 9

9 Nov 1993

5975-01-387-6270
Roxkit Pack

013876270
ROXKIT: RNCC: 3 | RNVC: 2
ROXKIT: RNCC: 5 | RNVC: 9

9 Mar 1994

5975-01-387-6289
Top-Packing

013876289
WEDGE 120MM AISI316: RNCC: 3 | RNVC: 2
ARW0001201021: RNCC: 5 | RNVC: 2
ARW0001201021: RNCC: 5 | RNVC: 9
TOP-PACKING SS: RNCC: 5 | RNVC: 9
TOP-PACKING SS: RNCC: 5 | RNVC: 9
WEDGE 120MM SS: RNCC: 5 | RNVC: 9
10051384: RNCC: 6 | RNVC: 9

9 Mar 1994

5975-01-390-3775
Electrical Box Connector

013903775
3702-1: RNCC: 3 | RNVC: 2

18 May 1994

5975-01-325-7635
Shorting Stick

013257635
G166572-2: RNCC: 3 | RNVC: 2
G166572-2: RNCC: 5 | RNVC: 2
G166572-2: RNCC: 5 | RNVC: 9

11 Sep 1990

5975-01-326-4677
Cable Reinforcing Link

013264677
803-5959174 PIECE 105: RNCC: 3 | RNVC: 2

25 Sep 1990

5975-01-327-3944
Cable Channel

013273944
7241541-02: RNCC: 3 | RNVC: 2

12 Oct 1990

5975-01-330-6643
Electrical Equipment Mounting Base

013306643
70600-81813-101: RNCC: 1 | RNVC: 2
8900699-501: RNCC: 3 | RNVC: 9
MT6523/ASN-150: RNCC: 5 | RNVC: 2
8900699-503: RNCC: C | RNVC: 1
70600-81813-102: RNCC: C | RNVC: 1

6 Dec 1990

5975-01-334-3671
Conduit Outlet

013343671
2IH3-1: RNCC: 3 | RNVC: 2
LT-11: RNCC: 3 | RNVC: 9
LT11-L: RNCC: 5 | RNVC: 9

21 Feb 1991

5975-01-336-7171
Retaining Rod

013367171
87034A1403: RNCC: 3 | RNVC: 9
87034A1403: RNCC: 5 | RNVC: 2

2 Apr 1991

5975-01-336-9865
Rigid Metal Conduit

013369865
A 419 540 70 77: RNCC: 3 | RNVC: 2
MBT A4195407077: RNCC: 5 | RNVC: 9
419 540 70 77: RNCC: 5 | RNVC: 9

7 Apr 1991

5975-01-336-5448
Blank Panel

013365448
9905-UH60-006: RNCC: 3 | RNVC: 2

27 Mar 1991

5975-01-340-0552
Junction Box

013400552
70550-02104-115: RNCC: 3 | RNVC: 2
B-1542-SAC-115: RNCC: 3 | RNVC: 2
70550-02104-115: RNCC: 7 | RNVC: 2

7 Jun 1991

5975-01-341-3117
Electrical Conduit Adapter

013413117
5859502-1: RNCC: 3 | RNVC: 1
72000-150K: RNCC: 3 | RNVC: 2

27 Jun 1991

5975-01-342-1647
Electrical Box Connector

013421647
CGE194: RNCC: 3 | RNVC: 2

16 Jul 1991

5975-01-387-6292
Roxkit Pack

013876292
ROXKIT SS: RNCC: 3 | RNVC: 2
ROXKIT SS: RNCC: 5 | RNVC: 9

9 Mar 1994

5975-01-397-1830
Electrical Tie Down Mounting Base

013971830
ABM1M-AT-C: RNCC: 3 | RNVC: 2
ABM1M-AT-C: RNCC: C | RNVC: 1

5 Oct 1994

5975-01-397-7740
Blank Panel

013977740
3313241-1: RNCC: 3 | RNVC: 2
3313241-1: RNCC: 5 | RNVC: 2

20 Oct 1994

5975-01-400-0600
Electrical Conduit Locknut

014000600
2251: RNCC: 3 | RNVC: 2

7 Dec 1994

5975-01-407-5486
Cable Marker Sleeve

014075486
SS7074-1397: RNCC: 3 | RNVC: 2

31 Jan 1995

5975-01-414-7796
Rigid Metal Conduit

014147796
1339AS962-6: RNCC: 3 | RNVC: 2

14 Jun 1995

5975-01-422-6399
Electrical Nonmetallic Conduit Assembly

014226399
R58HB04C18Y018: RNCC: 3 | RNVC: 2
R58HB04C18Y018: RNCC: 5 | RNVC: 9

5 Dec 1995

5975-01-422-9666
Cable Guide

014229666
929546-1: RNCC: 3 | RNVC: 2
929546-1: RNCC: 5 | RNVC: 2
929546-1: RNCC: 5 | RNVC: 9

12 Dec 1995

5975-01-436-3618
Junction Box

014363618
A606NFSS: RNCC: 3 | RNVC: 2
1741AS418-2: RNCC: 7 | RNVC: 2
1741AS418: RNCC: D | RNVC: 9

17 Sep 1996

5975-01-436-7763
Junction Box

014367763
70550-02060-047: RNCC: 3 | RNVC: 2

27 Sep 1996

5975-01-433-1493
Electrical Cable Protector

014331493
676-8318-001: RNCC: 3 | RNVC: 2

21 Jun 1996

5975-01-418-6041
Junction Box

014186041
8D00186-1: RNCC: 3 | RNVC: 2
8D00186-1: RNCC: 5 | RNVC: 9

31 Aug 1995

5975-01-440-0773
Electrical Components Tie Down Strap

014400773
TY5275MX: RNCC: 3 | RNVC: 2
3297AS204-2: RNCC: D | RNVC: 9

2 Jan 1997

5975-01-441-7561
Electrical Cable Protector

014417561
89115957-1: RNCC: 3 | RNVC: 9

24 Feb 1997

5975-01-443-4035
Flexible Nonmetallic Conduit

014434035
48-02218-075: RNCC: 3 | RNVC: 2
48-00102-005: RNCC: 5 | RNVC: 9

9 Apr 1997

5975-01-444-2005
Cable Hanger

014442005
320-4-50646-101: RNCC: 3 | RNVC: 2

1 May 1997

5975-01-444-6998
Junction Box

014446998
6816008: RNCC: 3 | RNVC: 2

14 May 1997

5975-01-444-7929
Electrical Equipment Mounting Base

014447929
822-0792-001: RNCC: 3 | RNVC: 2

16 May 1997

5975-01-446-3226
Switch Box Case

014463226
IH3-2-LM: RNCC: 3 | RNVC: 2
T14-L: RNCC: 5 | RNVC: 9

30 Jun 1997

5975-01-448-4536
Cable Hanger

014484536
CRES 316 6.5 IN. LG BAR: RNCC: 3 | RNVC: 1
A-101107462: RNCC: 3 | RNVC: 2
101-107-462: RNCC: 5 | RNVC: 9

29 Aug 1997

5975-01-449-7353
Cable Hanger

014497353
C5078162-1: RNCC: 3 | RNVC: 9

11 Oct 1997

5975-01-450-3453
Electrical Conduit Coupling

014503453
16W195-17: RNCC: 3 | RNVC: 2

4 Nov 1997

5975-01-451-2175
Rigid Metal Conduit Assembly

014512175
68A250649-2071: RNCC: 3 | RNVC: 2

9 Dec 1997

5975-01-452-6982
Electronic Junction Rack

014526982
DCR-1A-07: RNCC: 3 | RNVC: 2

4 Feb 1998

5975-01-452-7053
Electrical Wall Plate

014527053
WP26V: RNCC: 3 | RNVC: 2
WP26: RNCC: 5 | RNVC: 9
WP26: RNCC: 5 | RNVC: 9

4 Feb 1998

5975-01-453-0105
Flexible Metal Conduit Assembly

014530105
57350-22FT0IN: RNCC: 3 | RNVC: 2
57350-22: RNCC: 5 | RNVC: 9

17 Feb 1998

5975-01-454-5395
Electrical Equipment Mounting Base

014545395
822-1003-001: RNCC: 3 | RNVC: 2

3 Apr 1998

5975-01-456-3634
Electrical-Electronic Equipment Chassis

014563634
3260AS1401: RNCC: 3 | RNVC: 2

10 Jun 1998

5975-01-459-1344
Electrical Components Tie Down Strap

014591344
PL2M2S-L: RNCC: 3 | RNVC: 2

22 Sep 1998

5975-01-458-7811
Electrical Conduit Adapter

014587811
C206AX2423DA: RNCC: 3 | RNVC: 2
3AF316XC2423DA: RNCC: 3 | RNVC: 2
K15K0021-209: RNCC: 5 | RNVC: 9

9 Sep 1998

5975-01-461-7563
Stuffing Tube

014617563
M24235/14-126: RNCC: 2 | RNVC: 2
MIL-T-81714/14: RNCC: 4 | RNVC: 1
LO1572: RNCC: 5 | RNVC: 9
RO0084: RNCC: 5 | RNVC: 9

31 Dec 1998

5975-01-462-0615
Electrical Nonmetallic Conduit Assembly

014620615
200AS349-040BG04054FA094: RNCC: 3 | RNVC: 2
200AS349-040BG04054FA094: RNCC: 5 | RNVC: 2

20 Jan 1999

5975-01-462-0620
Electrical Nonmetallic Conduit Assembly

014620620
200AS349-941GG06054DA007: RNCC: 3 | RNVC: 2
200AS349-941GG06054DA007: RNCC: 5 | RNVC: 9

20 Jan 1999

5975-01-462-1828
Stuffing Tube

014621828
M24235/14-136: RNCC: 2 | RNVC: 2
MIL-S-24235: RNCC: 4 | RNVC: 1
LO-014621828: RNCC: 5 | RNVC: 1
RO0085A: RNCC: 5 | RNVC: 9
RO0085: RNCC: 5 | RNVC: 9

25 Jan 1999

5975-01-462-7212
Stuffing Tube

014627212
1945.7 SIZE G TYPE 66: RNCC: 3 | RNVC: 2
9000S620274269-117: RNCC: 5 | RNVC: 1
9000S620274269: RNCC: 5 | RNVC: 1
1945.7 SIZE A TYPE 66: RNCC: 5 | RNVC: 9

13 Feb 1999

5975-01-462-7312
Stuffing Tube

014627312
1990.13 SIZE A TYPE 67: RNCC: 3 | RNVC: 2
9000S620274269: RNCC: 5 | RNVC: 2
9000S620274269-153: RNCC: 5 | RNVC: 2

16 Feb 1999

5975-01-417-3267
Shop Set Installation Electrical Kit

014173267
5705624: RNCC: 3 | RNVC: 2

5 Aug 1995

5975-01-419-4054
Electrical Box Connector

014194054
420AB001N1401: RNCC: 3 | RNVC: 2

21 Sep 1995

5975-01-360-3695
Electrical Conduit Sealing Fitting

013603695
EYS6: RNCC: 3 | RNVC: 2

23 Jun 1992

5975-01-416-3359
Protection Connector Kit

014163359
6317971: RNCC: 1 | RNVC: 2
HCPS-89: RNCC: 3 | RNVC: 9
6317971-023: RNCC: 5 | RNVC: 2
HCPS-89: RNCC: 5 | RNVC: 9
HCPS-89: RNCC: 5 | RNVC: 9
HCPS-89: RNCC: 5 | RNVC: 9
HCPS-89: RNCC: C | RNVC: 1

17 Jul 1995

5975-01-416-8433
Blank Panel

014168433
66400-013: RNCC: 3 | RNVC: 2

26 Jul 1995

5975-01-424-1016
Electrical Conduit Union

014241016
397S019NF1606A3: RNCC: 3 | RNVC: 2

20 Jan 1996

5975-01-432-5846
Electrical Cable Nipple

014325846
10557073: RNCC: 3 | RNVC: 2
10557073: RNCC: 5 | RNVC: 2

10 Jun 1996

5975-01-437-8377
Electrical Components Tie Down Strap

014378377
1300585: RNCC: 3 | RNVC: 2
7130K53: RNCC: 5 | RNVC: 2

24 Oct 1996

5975-01-436-8705
Flexible Nonmetallic Conduit

014368705
HCTE-0750-0-SP: RNCC: 3 | RNVC: 2
HCTE-0750-0: RNCC: 5 | RNVC: 2
HCTE-0750-0: RNCC: 5 | RNVC: 9

30 Sep 1996

5975-01-430-7114
Cable Collar

014307114
5N-9068: RNCC: 3 | RNVC: 2

2 May 1996

5975-01-439-4147
Electrical Components Tie Down Strap

014394147
PLT2S-C702: RNCC: 3 | RNVC: 2

7 Dec 1996

5975-01-432-4120
Conduit Outlet

014324120
11B254108: RNCC: 3 | RNVC: 2
5331-0: RNCC: 5 | RNVC: 2

5 Jun 1996

5975-01-432-4125
Electrical Conduit Adapter

014324125
LT75G-SA: RNCC: 3 | RNVC: 2
ZS202: RNCC: 5 | RNVC: 2
11B254124-2: RNCC: 5 | RNVC: 9
4803-1: RNCC: 5 | RNVC: 9

5 Jun 1996

5975-01-286-5850
Electrical Cable Nipple

012865850
8724495: RNCC: 3 | RNVC: 2
8724495: RNCC: 5 | RNVC: 9

5 Oct 1988

5975-01-286-7367
Electrical Cable Nipple

012867367
9G8909: RNCC: 3 | RNVC: 2

7 Oct 1988

5975-01-288-4757
Electrical Components Tie Down Strap

012884757
11441068-3: RNCC: 1 | RNVC: 2
MS3368-1-8A: RNCC: 3 | RNVC: 2

8 Nov 1988

5975-01-296-6058
Fanning Strip

012966058
7517533-07: RNCC: 3 | RNVC: 2

23 Mar 1989

5975-01-296-6060
Fanning Strip

012966060
7517533-09: RNCC: 3 | RNVC: 2
7517533-09: RNCC: 5 | RNVC: 9

23 Mar 1989

5975-01-296-6069
Fanning Strip

012966069
7517533-18: RNCC: 3 | RNVC: 9
7517533-18: RNCC: 5 | RNVC: 9

23 Mar 1989

5975-01-296-7105
Flexible Metal Conduit Assembly

012967105
251015-00524: RNCC: 3 | RNVC: 1
750-011NF08-52.5: RNCC: 3 | RNVC: 1
200204-DI0525: RNCC: 3 | RNVC: 1
10250675-34: RNCC: 3 | RNVC: 2

23 Mar 1989

5975-01-296-7107
Flexible Metal Conduit Assembly

012967107
251017-00352: RNCC: 3 | RNVC: 2
750-011NF16-35.25: RNCC: 3 | RNVC: 2
200206-DI0353: RNCC: 3 | RNVC: 2
10250675-65: RNCC: 7 | RNVC: 2

23 Mar 1989

5975-01-296-7917
Fanning Strip

012967917
7517533-37: RNCC: 3 | RNVC: 9
7517533-37: RNCC: 5 | RNVC: 9

24 Mar 1989

5975-01-299-7781
Electrical Components Tie Down Strap

012997781
T30MR-0: RNCC: 3 | RNVC: 2
PLC1.5I-S8-0: RNCC: 3 | RNVC: 2
L-5-30 MH-0: RNCC: 3 | RNVC: 2
TY34MX-0: RNCC: 5 | RNVC: 2
TY34MX-0: RNCC: 5 | RNVC: 9
PLC1.5I-S8-C0: RNCC: 5 | RNVC: 9
5594318-B: RNCC: 5 | RNVC: 9

5 May 1989

5975-01-300-4663
Electrical Conduit Elbow

013004663
T1094: RNCC: 3 | RNVC: 2
CRN 3014: RNCC: 3 | RNVC: 2
208466-FB15000A: RNCC: 3 | RNVC: 2
208466-FB6400: RNCC: 5 | RNVC: 9
5190213: RNCC: 7 | RNVC: 2

14 May 1989

5975-01-303-4986
Electrical Box Connector

013034986
31-301-21856-10: RNCC: 3 | RNVC: 2

30 Jun 1989

5975-01-303-1726
Cable Hanger

013031726
6532C422-2: RNCC: 3 | RNVC: 2
6532C422-2: RNCC: 5 | RNVC: 2

26 Jun 1989

5975-01-305-0833
Electronic Junction Rack

013050833
591628-2: RNCC: 3 | RNVC: 2
11437559-2: RNCC: 5 | RNVC: 2
MRTB-3-239: RNCC: 5 | RNVC: 9

1 Aug 1989

5975-01-306-6167
Electrical Equipment Mounting Base

013066167
2850383-2: RNCC: 3 | RNVC: 2
2850383-2: RNCC: 5 | RNVC: 9
2850383-2: RNCC: 5 | RNVC: 9

27 Aug 1989

5975-01-310-4995
Electrical Tie Down Mounting Base

013104995
Z22-0015-001: RNCC: 3 | RNVC: 2
08461: RNCC: 5 | RNVC: 2
71-513365-1: RNCC: 5 | RNVC: 2
15E2906: RNCC: 5 | RNVC: 9
10134308: RNCC: 6 | RNVC: 9

4 Nov 1989

5975-01-311-3774
Electrical-Electronic Equipment Panel

013113774
128-59128-1: RNCC: 3 | RNVC: 2

25 Nov 1989

5975-01-314-4652
Electrical Box Connector

013144652
7119K12: RNCC: 3 | RNVC: 2
7119K12: RNCC: 5 | RNVC: 9

31 Jan 1990

5975-01-316-2892
Electrical-Electronic Equipment Chassis

013162892
5060-7952: RNCC: 3 | RNVC: 2
5060-7952: RNCC: 3 | RNVC: 9
5060-7952: RNCC: 5 | RNVC: 9

8 Mar 1990

5975-01-316-2182
Electrical Conduit Adapter

013162182
J1378-13TS28-2F-34: RNCC: 3 | RNVC: 2

6 Mar 1990

5975-01-318-4718
Ground Rod

013184718
337: RNCC: 3 | RNVC: 2
337: RNCC: 3 | RNVC: 9

19 Apr 1990

5975-01-316-1141
Electrical Cable Protector

013161141
12361760: RNCC: 3 | RNVC: 2

3 Mar 1990

5975-01-319-2562
Electrical Cable Protector

013192562
12910395: RNCC: 3 | RNVC: 2
12910395: RNCC: 5 | RNVC: 2

4 May 1990

5975-01-319-6861
Electrical Conduit Adapter

013196861
2613235-13: RNCC: 3 | RNVC: 2
S1816C3406-8: RNCC: 5 | RNVC: 2

12 May 1990

5975-01-312-0085
Electrical-Electronic Equipment Panel

013120085
496-896-1027-008: RNCC: 3 | RNVC: 2

8 Dec 1989

5975-01-321-5686
Electrical Nonmetallic Conduit Assembly

013215686
R58HA06B33A005: RNCC: 3 | RNVC: 1
R58HA06B33A005: RNCC: 5 | RNVC: 9

20 Jun 1990

5975-01-321-0749
Cable Terminal Chamber

013210749
050519-12A: RNCC: 3 | RNVC: 9
02-270008-312: RNCC: 5 | RNVC: 9
02-270008-312: RNCC: C | RNVC: 1

8 Jun 1990

5975-01-345-6512
Electrical Components Tie Down Strap

013456512
PLT1.5I-M: RNCC: 3 | RNVC: 2
7804987907: RNCC: 5 | RNVC: 2
04056393013000: RNCC: 5 | RNVC: 2

23 Sep 1991

5975-01-345-7703
Electrical Conduit Tee

013457703
952003: RNCC: 3 | RNVC: 2

24 Sep 1991

5975-01-346-2074
Electrical Bonding Ring

013462074
TRO4AI-TINEL-LOCK-RING: RNCC: 3 | RNVC: 2
TR014AI-TINEL-LOCK-RING: RNCC: 5 | RNVC: 9
TR04AI: RNCC: 5 | RNVC: 9
5365-009-04AI: RNCC: 5 | RNVC: 9
2873189-101: RNCC: 5 | RNVC: 9

28 Sep 1991

5975-01-347-6404
Electrical Nonmetallic Conduit Assembly

013476404
253569-0020: RNCC: 3 | RNVC: 2
6413117-20: RNCC: 5 | RNVC: 2
6413117-20: RNCC: 7 | RNVC: 2

26 Oct 1991

5975-01-350-6719
Support Assembly

013506719
10370G03: RNCC: 3 | RNVC: 2

20 Dec 1991

5975-01-351-4279
Electrical Receptacle

013514279
GE4102-2: RNCC: 3 | RNVC: 2
5361V: RNCC: 3 | RNVC: 2
5361V: RNCC: 5 | RNVC: 9
5361V-BOX: RNCC: 5 | RNVC: 9

9 Jan 1992

5975-01-353-2176
Electrical Equipment Rack

013532176
12918259: RNCC: 3 | RNVC: 2
12918259: RNCC: 5 | RNVC: 9

7 Feb 1992

5975-01-355-4354
Electrical Box Connector

013554354
470-LT2: RNCC: 3 | RNVC: 9
LT9050A: RNCC: 5 | RNVC: 2

18 Mar 1992

5975-01-356-7806
Electrical Tie Down Mounting Base

013567806
TC5344A: RNCC: 3 | RNVC: 2

10 Apr 1992

5975-01-357-1562
Electrical-Electronic Equipment Chassis

013571562
12346520: RNCC: 3 | RNVC: 2
12346520: RNCC: D | RNVC: 9

17 Apr 1992

5975-01-357-2027
Electrical Components Tie Down Strap

013572027
SS7034-2797: RNCC: 3 | RNVC: 2

18 Apr 1992

5975-01-360-7086
Cable Hanger

013607086
AS23190/1: RNCC: 3 | RNVC: 1
M23190/1-6: RNCC: 3 | RNVC: 2
AS23190/1: RNCC: 5 | RNVC: 9
M23190/1-6: RNCC: 5 | RNVC: 9
M23190/1-6: RNCC: 5 | RNVC: 9
MIL-S-23190-1: RNCC: 5 | RNVC: 9

29 Jun 1992

5975-01-367-9738
Electrical Components Tie Down Strap

013679738
08-380: RNCC: 3 | RNVC: 2

22 Nov 1992

5975-01-369-3081
Electrical Cable Protector

013693081
12918989: RNCC: 3 | RNVC: 2
12918989: RNCC: 3 | RNVC: 2

19 Dec 1992

5975-01-361-5127
Cable Marker Sleeve

013615127
690-121-006: RNCC: 3 | RNVC: 2

18 Jul 1992

5975-01-362-6388
Cable Terminal Chamber

013626388
8T8566: RNCC: 3 | RNVC: 2
10322889: RNCC: 6 | RNVC: 9

12 Aug 1992

5975-01-378-1089
Flexible Metal Conduit Assembly

013781089
57350-6FT0IN: RNCC: 3 | RNVC: 2
POD-57350-06: RNCC: 5 | RNVC: 9

11 Aug 1993

5975-01-378-2320
Stuffing Tube

013782320
637S010NF0412A: RNCC: 3 | RNVC: 2

12 Aug 1993

5975-01-380-5644
Blank Panel

013805644
176093-0001: RNCC: 3 | RNVC: 2

21 Sep 1993

5975-01-382-0754
Electrical Conduit Ferrule

013820754
SS-FER .125: RNCC: 3 | RNVC: 2
SS-FER-18: RNCC: 3 | RNVC: 2

28 Oct 1993

5975-01-385-0638
Electrical Equipment Drawer

013850638
7594152: RNCC: 3 | RNVC: 2
801-0303: RNCC: 5 | RNVC: 9
DE100I-2: RNCC: 5 | RNVC: 9
DE100I-S: RNCC: 5 | RNVC: 9

3 Jan 1994

5975-01-387-6762
Electrical Equipment Mounting Base

013876762
6450726-1: RNCC: 3 | RNVC: 2
822-0265-001: RNCC: 5 | RNVC: 9
MT-6856/U: RNCC: 5 | RNVC: 9
822-0265-001: RNCC: 5 | RNVC: 9

10 Mar 1994

5975-01-327-3946
Cable Channel

013273946
7241541-05: RNCC: 3 | RNVC: 2

12 Oct 1990

5975-01-327-3948
Cable Channel

013273948
7241541-09: RNCC: 3 | RNVC: 2

12 Oct 1990

5975-01-330-0665
Metallic Raceway Assembly

013300665
366S18010-9: RNCC: 3 | RNVC: 2
3S18010-9: RNCC: 5 | RNVC: 9
5SE00590-1-144: RNCC: 5 | RNVC: 9
5SE00590: RNCC: 7 | RNVC: 2

29 Nov 1990

5975-01-331-5006
Electrical Components Tie Down Strap

013315006
PLT3S-M0: RNCC: 3 | RNVC: 2
155054514: RNCC: 5 | RNVC: 2

20 Dec 1990

5975-01-333-8442
Flexible Metal Conduit Assembly

013338442
11973-0015: RNCC: 3 | RNVC: 2
LE161-0021-0015: RNCC: 7 | RNVC: 2

10 Feb 1991

5975-01-336-2679
Stuffing Tube

013362679
2111007-205: RNCC: 3 | RNVC: 2

21 Mar 1991

5975-01-337-7719
Blank Panel

013377719
74A800782-1005: RNCC: 3 | RNVC: 2
10154472: RNCC: 6 | RNVC: 9

21 Apr 1991

5975-01-338-9149
Electrical-Electronic Equipment Panel

013389149
AT105506: RNCC: 3 | RNVC: 2
AT105506: RNCC: 5 | RNVC: 9

12 May 1991

5975-01-339-5998
Electrical Equipment Mounting Base

013395998
8040004948-1: RNCC: 3 | RNVC: 9

24 May 1991

5975-01-340-8870
Electrical Components Tie Down Strap

013408870
2EL807: RNCC: 3 | RNVC: 2
1-11-2-1: RNCC: 5 | RNVC: 9
2EL807: RNCC: 5 | RNVC: 9
1-11-2-1: RNCC: 5 | RNVC: 9
1-11-2-1: RNCC: 5 | RNVC: 9

20 Jun 1991

5975-01-393-7372
Cable Strain Relief Bushing

013937372
1244: RNCC: 3 | RNVC: 2
30-00154-015: RNCC: 7 | RNVC: 2

26 Jul 1994

5975-01-395-1078
Electrical Bonding Ring

013951078
LS35345-04: RNCC: 3 | RNVC: 2
LS35345-04: RNCC: 5 | RNVC: 2
LS35345-04: RNCC: 5 | RNVC: 2

22 Aug 1994

5975-01-398-6914
Electrical Equipment Mounting Base

013986914
13263: RNCC: 3 | RNVC: 2
13263: RNCC: 5 | RNVC: 2
13263: RNCC: 5 | RNVC: 2

8 Nov 1994

5975-01-399-4129
Electrical Box Connector

013994129
3228: RNCC: 3 | RNVC: 2
GF803AH1: RNCC: 5 | RNVC: 1

24 Nov 1994

5975-01-400-0624
Electrical Box Connector

014000624
3308: RNCC: 3 | RNVC: 2

7 Dec 1994

5975-01-406-1336
Cable Hanger

014061336
101-107-046: RNCC: 3 | RNVC: 2

21 Dec 1994

5975-01-407-8331
Electrical Conduit Adapter

014078331
RP2100-G05-S: RNCC: 3 | RNVC: 2
RP2100-F05-S: RNCC: 3 | RNVC: 2
RP2100-G05-5: RNCC: 5 | RNVC: 9

7 Feb 1995

5975-01-412-0400
Electrical Conduit Adapter

014120400
1058AS1476: RNCC: 3 | RNVC: 2

8 Apr 1995

5975-01-415-2288
Electrical Cable Nipple

014152288
5728-005R: RNCC: 3 | RNVC: 9

22 Jun 1995

5975-01-420-8367
Electrical Equipment Mounting Base

014208367
41858-1: RNCC: 3 | RNVC: 2
10-0188-1: RNCC: 5 | RNVC: 2

26 Oct 1995

5975-01-422-2033
Blank Panel

014222033
5820069G1: RNCC: 3 | RNVC: 2

25 Nov 1995

5975-01-421-9718
Flexible Nonmetallic Conduit

014219718
R-68238: RNCC: 3 | RNVC: 9
12420924-004: RNCC: 5 | RNVC: 2
058NPBS: RNCC: 5 | RNVC: 2
445171C1: RNCC: 5 | RNVC: 2
12420924-004: RNCC: 7 | RNVC: 2
12420924-004: RNCC: 7 | RNVC: 2
R-68238: RNCC: C | RNVC: 1
12420924: RNCC: D | RNVC: 9

17 Nov 1995

5975-01-425-3906
Electrical Conduit Tee

014253906
HM020-900: RNCC: 3 | RNVC: 2

20 Feb 1996

5975-01-425-7593
Flexible Nonmetallic Conduit

014257593
SAE-AS81914/1: RNCC: 3 | RNVC: 1
M81914/1-1005: RNCC: 3 | RNVC: 2
M81914/1-1005: RNCC: 5 | RNVC: 9
4720PL0887481: RNCC: 6 | RNVC: 9

27 Feb 1996

5975-01-438-5121
Junction Box

014385121
680: RNCC: 3 | RNVC: 2

8 Nov 1996

5975-01-430-7120
Electrical Equipment Mounting Base

014307120
A3168013-2: RNCC: 3 | RNVC: 2
A3168013-2: RNCC: 5 | RNVC: 1

2 May 1996

5975-01-442-5156
Electrical-Electronic Equipment Chassis

014425156
6107-1200-0000: RNCC: 3 | RNVC: 2
1131061N00: RNCC: 5 | RNVC: 2
DE100I-SW: RNCC: 5 | RNVC: 9
DE100I-SW/H: RNCC: 5 | RNVC: 9
6101-1200-0000: RNCC: 5 | RNVC: 9
DE100I-SW: RNCC: 5 | RNVC: 9
DE100I-CSWU2: RNCC: 5 | RNVC: 9
DE100I-SWU2/RH: RNCC: 5 | RNVC: 9

17 Mar 1997

5975-01-443-1074
Electrical Components Tie Down Strap

014431074
279040A24: RNCC: 3 | RNVC: 2

2 Apr 1997

5975-01-443-5554
Junction Box

014435554
F66T24HC: RNCC: 3 | RNVC: 2
F-6624HC: RNCC: 3 | RNVC: 9

12 Apr 1997

5975-01-444-2693
Drawer Cover

014442693
8442C55H06: RNCC: 3 | RNVC: 1

2 May 1997

5975-01-444-7998
Electrical-Electronic Equipment Chassis

014447998
986-4018-001: RNCC: 3 | RNVC: 2

16 May 1997

5975-01-444-8292
Fanning Strip

014448292
65560-09109-101: RNCC: 3 | RNVC: 2
65560-09109-101: RNCC: 5 | RNVC: 2
65560-09109-101: RNCC: 5 | RNVC: 2

16 May 1997

5975-01-446-3502
Flexible Nonmetallic Conduit

014463502
SAE-AS81914/5: RNCC: 3 | RNVC: 1
M81914/5-1108B: RNCC: 3 | RNVC: 2
M81914/5-1108 BLK: RNCC: 5 | RNVC: 9

1 Jul 1997

5975-01-447-9184
Blank Panel

014479184
A3103995: RNCC: 3 | RNVC: 2

16 Aug 1997

5975-01-450-2526
Electronic Junction Rack

014502526
ARMS-N04: RNCC: 3 | RNVC: 2
8027520-1-04: RNCC: 5 | RNVC: 2
ARMS: RNCC: D | RNVC: 9

31 Oct 1997

5975-01-450-6631
Electrical Cable Nipple

014506631
230E3T02: RNCC: 3 | RNVC: 2
230E3T02: RNCC: 3 | RNVC: 9
10607952: RNCC: 5 | RNVC: 2

18 Nov 1997

5975-01-455-3410
Rigid Metal Conduit Assembly

014553410
3260AS436: RNCC: 3 | RNVC: 2
3260AS436: RNCC: 5 | RNVC: 2
3260AS436: RNCC: 7 | RNVC: 2

29 Apr 1998

5975-01-456-1510
Electrical-Electronic Equipment Chassis

014561510
4042860-0502: RNCC: 3 | RNVC: 2

2 Jun 1998

5975-01-458-1901
Electronic Equipment Mounting Tray

014581901
3063944: RNCC: 3 | RNVC: 2
3063944: RNCC: 5 | RNVC: 9

17 Aug 1998

5975-01-460-8986
Cable Hanger

014608986
S3255SG4: RNCC: 3 | RNVC: 2
3225T22: RNCC: 5 | RNVC: 2

19 Nov 1998

5975-01-461-6964
Stuffing Tube

014616964
MIL-T-81714/14: RNCC: 4 | RNVC: 1
M24235/14-123: RNCC: 5 | RNVC: 2
RO0032B: RNCC: 5 | RNVC: 9
RO0032C: RNCC: 5 | RNVC: 9

28 Dec 1998

5975-01-461-7549
Stuffing Tube

014617549
M24235/14-124: RNCC: 2 | RNVC: 2
RO0046A: RNCC: 5 | RNVC: 9
RO0046: RNCC: 5 | RNVC: 9

31 Dec 1998

5975-01-461-7570
Stuffing Tube

014617570
M24235/14-128: RNCC: 2 | RNVC: 2
MIL-S-24235: RNCC: 4 | RNVC: 1
RO0028A: RNCC: 5 | RNVC: 9
MIL-T-81714/14: RNCC: 5 | RNVC: 9
LO1562: RNCC: 5 | RNVC: 9
RO0028: RNCC: 5 | RNVC: 9

31 Dec 1998

5975-01-462-7218
Stuffing Tube

014627218
1945.9 SIZE K TYPE 66: RNCC: 3 | RNVC: 2
9000S620274269-119: RNCC: 5 | RNVC: 2
9000S620274269: RNCC: 5 | RNVC: 2
1945.9 SIZE A TYPE 66: RNCC: 5 | RNVC: 9

13 Feb 1999

5975-01-462-7324
Stuffing Tube

014627324
1990.1 SIZE A TYPE 67: RNCC: 3 | RNVC: 2
9000S620274269: RNCC: 5 | RNVC: 2
9000S620274269-141: RNCC: 5 | RNVC: 2

16 Feb 1999

5975-01-462-7968
Mount Cable Tie Pad

014627968
A3192557-001: RNCC: 3 | RNVC: 2

18 Feb 1999

5975-01-111-6827
Blank Panel

011116827
9M381A1R: RNCC: 3 | RNVC: 9
9M381A1R: RNCC: 5 | RNVC: 2

22 Apr 1981

5975-01-209-6797
Electrical Nonmetallic Conduit Assembly

012096797
R58HB02B33W058: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 9

4 Jun 1985

5975-01-069-8929
Electrical Box Connector

010698929
2577: RNCC: 3 | RNVC: 2
G37714-577: RNCC: C | RNVC: 1

28 Dec 1978

5975-01-075-0564
Electrical Box

010750564
4B69121-103A: RNCC: 3 | RNVC: 2

12 Apr 1979

5975-01-078-1231
Electrical Cable Nipple

010781231
12273242-219: RNCC: 1 | RNVC: 2
202C621-51/164: RNCC: 3 | RNVC: 2
202C621-51/164: RNCC: 5 | RNVC: 9

9 Jun 1979

5975-01-079-4084
Box Junction Cover

010794084
M129-51: RNCC: 3 | RNVC: 2
M129-51: RNCC: 5 | RNVC: 9

5 Jul 1979

5975-01-081-9312
Electrical Tie Down Mounting Base

010819312
ABMSAD: RNCC: 3 | RNVC: 2

23 Aug 1979

5975-01-083-1894
Electronic Junction Rack

010831894
CTJ-3D-08: RNCC: 3 | RNVC: 2
802720-1-08: RNCC: 5 | RNVC: 2
5204815-8: RNCC: C | RNVC: 1

19 Sep 1979

5975-01-083-3243
Electrical Conduit Bend

010833243
UL 797: RNCC: 3 | RNVC: 1
ANSI UL797: RNCC: 3 | RNVC: 2
WW-C-563: RNCC: 5 | RNVC: 9
WW-C-563 TY3: RNCC: 5 | RNVC: 9
MS75023-3: RNCC: 5 | RNVC: 9

21 Sep 1979

5975-01-088-6020
Conduit Chase Nipple

010886020
10359788: RNCC: 3 | RNVC: 2

16 Jan 1980

5975-01-092-2110
Electrical Conduit Elbow

010922110
461-TB: RNCC: 3 | RNVC: 2
LMFL90-75: RNCC: 5 | RNVC: 2
1743: RNCC: 5 | RNVC: 9
186: RNCC: 5 | RNVC: 9
9-75: RNCC: 5 | RNVC: 9
182: RNCC: 5 | RNVC: 9
461: RNCC: 5 | RNVC: 9
WSS94750: RNCC: 7 | RNVC: 2

21 Mar 1980

5975-01-096-2070
Electrical-Electronic Equipment Chassis

010962070
638-9039-001: RNCC: 3 | RNVC: 2

15 Jun 1980

5975-01-097-2166
Electrical Wall Plate

010972166
WLRD-1: RNCC: 3 | RNVC: 2
FSK-WRD: RNCC: 5 | RNVC: 2
AF32A23605-Y126: RNCC: 5 | RNVC: 9

7 Jul 1980

5975-01-087-0807
Blank Panel

010870807
A8P6: RNCC: 3 | RNVC: 2

11 Dec 1979

5975-01-104-2390
Electrical Equipment Mounting Base

011042390
22720-1: RNCC: 3 | RNVC: 2
DL86-5132: RNCC: 3 | RNVC: 2
22720: RNCC: 5 | RNVC: 9
0N231645: RNCC: 7 | RNVC: 2

1 Dec 1980

5975-01-104-9864
Electrical Conductor Bushing

011049864
2420: RNCC: 3 | RNVC: 2

14 Dec 1980

5975-01-105-8251
Raceway Coupling

011058251
G3001: RNCC: 3 | RNVC: 2
17-1-5988-1: RNCC: 7 | RNVC: 2

5 Jan 1981

Load More Results