What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 105 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 105of 491

5975-01-496-5272
Electrical Cable Protector

014965272
CPEC5X125-GP: RNCC: 3 | RNVC: 9
CPECGP5: RNCC: 5 | RNVC: 9

18 Apr 2002

5975-01-496-5276
Electrical Cable Protector

014965276
CP1X125-GP-DO: RNCC: 3 | RNVC: 9

18 Apr 2002

5975-01-497-9073
Flexible Nonmetallic Conduit

014979073
SAE-AS81914/6: RNCC: 3 | RNVC: 1
M81914/6-1008: RNCC: 3 | RNVC: 2
AMS-T81914/6: RNCC: 5 | RNVC: 1
M81914/6-1008: RNCC: 5 | RNVC: 9
AMS-T81914/6: RNCC: 5 | RNVC: 9
MIL-T-81914: RNCC: 5 | RNVC: 9

7 Jun 2002

5975-01-499-9938
Electrical-Electronic Equipment Panel

014999938
736502-1: RNCC: 3 | RNVC: 9
736502: RNCC: D | RNVC: 9

9 Aug 2002

5975-01-472-8759
Electronic Equipment Mounting Tray

014728759
A3257491: RNCC: 3 | RNVC: 2

21 Mar 2000

5975-01-498-1874
Cable Hanger

014981874
2159M59G01: RNCC: 3 | RNVC: 2
2159M59: RNCC: D | RNVC: 9

18 Jun 2002

5975-01-502-1526
Flexible Nonmetallic Conduit

015021526
GENCOTE 140-.5ID: RNCC: 3 | RNVC: 2

28 Oct 2002

5975-01-504-2127
Electrical Components Tie Down Strap

015042127
ST2625-07: RNCC: 1 | RNVC: 2
PLT4H-76: RNCC: 3 | RNVC: 2

22 Jan 2003

5975-01-507-0227
Electrical Components Tie Down Strap

015070227
PLT4H-TL0: RNCC: 3 | RNVC: 2
8966831: RNCC: 5 | RNVC: 2
AL-14-120-0: RNCC: 5 | RNVC: 2
PLT4H-TL0: RNCC: 5 | RNVC: 2

16 Apr 2003

5975-01-507-3236
Electrical-Electronic Equipment Panel

015073236
167-8283: RNCC: 3 | RNVC: 2

24 Apr 2003

5975-01-508-1585
Electrical Conduit Ferrule

015081585
0409700000: RNCC: 3 | RNVC: 2
40970: RNCC: 5 | RNVC: 2

14 May 2003

5975-01-509-8088
Rigid Metal Conduit Assembly

015098088
23A02881-2: RNCC: 3 | RNVC: 2

3 Jul 2003

5975-01-511-4909
Junction Box

015114909
4266 005: RNCC: 3 | RNVC: 2
71.301: RNCC: 5 | RNVC: 9

11 Aug 2003

5975-01-510-3251
Cable Hanger

015103251
MCNY-1250-9-L: RNCC: 3 | RNVC: 2
7566K27: RNCC: 5 | RNVC: 2

17 Jul 2003

5975-01-514-7468
Electrical Conduit Coupling Nut

015147468
717-071-1: RNCC: 3 | RNVC: 2
717-071-1: RNCC: 5 | RNVC: 9

4 Nov 2003

5975-01-514-6678
Conduit Outlet

015146678
OLR-3: RNCC: 3 | RNVC: 2

31 Oct 2003

5975-01-514-2785
Electrical Wall Plate

015142785
2178678: RNCC: 3 | RNVC: 2

22 Oct 2003

5975-01-515-9401
Electrical Equipment Foot

015159401
21027-001: RNCC: 3 | RNVC: 2

15 Dec 2003

5975-01-519-3637
Electrical Equipment Mounting Base

015193637
RF-5384VM-01: RNCC: 3 | RNVC: 2
RF-5384VM-01: RNCC: 5 | RNVC: 2
RF-5384VM-01: RNCC: 5 | RNVC: 2
RF-5384VM-01: RNCC: 5 | RNVC: 2
5975PL1623101: RNCC: 6 | RNVC: 9

15 Apr 2004

5975-01-526-8849
Electrical Components Tie Down Strap

015268849
SAE-AS23190: RNCC: 3 | RNVC: 1
AS33671-4-0: RNCC: 3 | RNVC: 2
AS33671-4-0: RNCC: 3 | RNVC: 9
39-10021-00: RNCC: 5 | RNVC: 2
MS3367-4-0: RNCC: 5 | RNVC: 9

11 Jan 2005

5975-01-527-8321
Electrical Tie Down Mounting Base

015278321
7566K28: RNCC: 3 | RNVC: 2

18 Feb 2005

5975-01-529-0044
Electrical Box Connector

015290044
12491619: RNCC: 3 | RNVC: 2
12491619: RNCC: 3 | RNVC: 2

31 Mar 2005

5975-01-529-6358
Electrical Box Sealing Flange

015296358
60-714-0061-2: RNCC: 3 | RNVC: 2
01-564-0005-3 ITEM 5A: RNCC: 5 | RNVC: 2

25 Apr 2005

5975-01-530-1608
Electrical Conduit Adapter

015301608
K8459138A: RNCC: 3 | RNVC: 2
8459138A: RNCC: 5 | RNVC: 2

17 May 2005

5975-01-530-1705
Electrical Conduit Adapter

015301705
711HS078NF1728-4: RNCC: 3 | RNVC: 2
S4270FM7028S-34-4: RNCC: 3 | RNVC: 2
63A155258P65: RNCC: 7 | RNVC: 2
63A155258: RNCC: D | RNVC: 9

17 May 2005

5975-01-530-4827
Electrical Components Tie Down Strap

015304827
PL9003000-900 ITEM #13: RNCC: 3 | RNVC: 2
9000705-103 ITEM # 147: RNCC: 3 | RNVC: 2
PL9000102-124 ITEM# 23: RNCC: 3 | RNVC: 2
9000705-104 ITEM # 147: RNCC: 3 | RNVC: 2
PL9000705-105 ITEM #147: RNCC: 3 | RNVC: 2
9000102-101 ITEM # 115: RNCC: 3 | RNVC: 2
PL9000433-100 FIND #21: RNCC: 3 | RNVC: 2
94905K33: RNCC: 5 | RNVC: 2
94905K33: RNCC: 5 | RNVC: 9

31 May 2005

5975-01-534-1441
Cable Marker Sleeve

015341441
SM12 1/2 WHT: RNCC: 3 | RNVC: 2
SM12 1/2 WHT: RNCC: 5 | RNVC: 2
LSF00099: RNCC: D | RNVC: 9

11 Oct 2005

5975-01-534-4607
Conduit Outlet

015344607
AA50563A-522AXXXC: RNCC: 2 | RNVC: 2
A-A-50563A: RNCC: 4 | RNVC: 1
618AS253-3: RNCC: 5 | RNVC: 1
W-C-586 TY V DESIGN 22 STYLE X: RNCC: 5 | RNVC: 9
618AS253: RNCC: D | RNVC: 9

24 Oct 2005

5975-01-536-2679
Electrical Conduit Coupling

015362679
9-60S6KC: RNCC: 3 | RNVC: 2

27 Dec 2005

5975-01-538-2892
Electrical-Electronic Equipment Chassis

015382892
CPSMC0200-200: RNCC: 3 | RNVC: 9
62940249AA: RNCC: 5 | RNVC: 2
M0021278: RNCC: 5 | RNVC: 2
91937081: RNCC: 5 | RNVC: 2

16 Mar 2006

5975-01-539-3312
Electrical Components Tie Down Strap

015393312
B11L0L: RNCC: 3 | RNVC: 2
7130K46: RNCC: 5 | RNVC: 2

18 Apr 2006

5975-01-540-0980
Electrical Equipment Rack

015400980
12443745: RNCC: 3 | RNVC: 2
12443745: RNCC: 5 | RNVC: 2

9 May 2006

5975-01-540-3144
Raceway Cover

015403144
G-4000C: RNCC: 3 | RNVC: 1
12423629-008: RNCC: 3 | RNVC: 2
12423629-008: RNCC: 3 | RNVC: 2
12423629-008: RNCC: 5 | RNVC: 2
12423629-008: RNCC: 7 | RNVC: 2
12423629: RNCC: D | RNVC: 9

15 May 2006

5975-01-540-7481
Flexible Metal Conduit

015407481
12443823-001: RNCC: 3 | RNVC: 2
12441813: RNCC: D | RNVC: 9

1 Jun 2006

5975-01-541-1595
Electrical Box Connector

015411595
3KG83: RNCC: 3 | RNVC: 2

16 Jun 2006

5975-01-542-1235
Cable Marker Sleeve

015421235
TMS-SCE-1.5K-3/8-2.0-9: RNCC: 3 | RNVC: 2
TMS-SCE-F1.5K-3/8-9: RNCC: 5 | RNVC: 9

24 Jul 2006

5975-01-543-2894
Electrical-Electronic Equipment Panel

015432894
SF035-271: RNCC: 3 | RNVC: 2
217-4775644ITEM11: RNCC: 5 | RNVC: 2

7 Sep 2006

5975-01-543-9013
Strain Electrical Conductor Clamp

015439013
30-302-1C03G06: RNCC: 1 | RNVC: 2
30-302-1C03G06: RNCC: 3 | RNVC: 2
30-302-1C03G06: RNCC: 3 | RNVC: 2
30-302-1C03G06: RNCC: 3 | RNVC: 2
30-302-1C03G06: RNCC: 3 | RNVC: 2

25 Sep 2006

5975-01-543-7985
Electrical Tie Down Mounting Base

015437985
2048000: RNCC: 3 | RNVC: 2

21 Sep 2006

5975-01-544-3618
Junction Box

015443618
E989NNJ-CAR: RNCC: 3 | RNVC: 9
1000726: RNCC: 5 | RNVC: 2
E989NNJ-CAR: RNCC: 5 | RNVC: 2
E989NNJ-CAR: RNCC: 5 | RNVC: 9

11 Oct 2006

5975-01-544-7477
Electrical Box Connector

015447477
160040: RNCC: 3 | RNVC: 2

20 Oct 2006

5975-01-545-0378
Strain Electrical Conductor Clamp

015450378
30-302-2D09G10: RNCC: 3 | RNVC: 2

31 Oct 2006

5975-01-548-2313
Stuffing Tube

015482313
HJ1059BPK25: RNCC: 3 | RNVC: 2

14 Feb 2007

5975-01-548-5213
Flexible Metal Conduit Assembly

015485213
FLEXEXHEAS: RNCC: 3 | RNVC: 2
FLEXEXHEAS: RNCC: 3 | RNVC: 9

26 Feb 2007

5975-01-548-7900
Electrical Cable Protector

015487900
12488492: RNCC: 3 | RNVC: 2

5 Mar 2007

5975-01-550-1240
Stuffing Tube

015501240
245483215: RNCC: 3 | RNVC: 2
21644.6: RNCC: 5 | RNVC: 2

10 Apr 2007

5975-01-463-6520
Flexible Metal Conduit Assembly

014636520
5909558-14: RNCC: 1 | RNVC: 2
759-245-09: RNCC: 3 | RNVC: 2
5909558-14: RNCC: 5 | RNVC: 2
5909558: RNCC: 5 | RNVC: 9

30 Mar 1999

5975-01-463-3700
Flexible Metal Conduit Assembly

014633700
254844-1001: RNCC: 3 | RNVC: 2

18 Mar 1999

5975-01-465-0372
Electrical Cable Nipple

014650372
216N2V02: RNCC: 3 | RNVC: 2
9325C08-1409-02: RNCC: 7 | RNVC: 2
9325C08-1409: RNCC: D | RNVC: 9

19 May 1999

5975-01-466-3965
Electrical Cable Nipple

014663965
232E4T02: RNCC: 3 | RNVC: 2
10638945: RNCC: 5 | RNVC: 2

16 Jul 1999

5975-01-468-0771
Electrical Box Connector

014680771
370: RNCC: 3 | RNVC: 2
CS71920: RNCC: D | RNVC: 9

28 Sep 1999

5975-01-469-3747
Electrical Cable Protector

014693747
50-093-A03T: RNCC: 3 | RNVC: 2

15 Nov 1999

5975-01-471-3350
Blank Panel

014713350
7-511B25025-29: RNCC: 3 | RNVC: 2
7-511B25025-29: RNCC: 5 | RNVC: 9

31 Jan 2000

5975-01-471-8635
Strain Electrical Conductor Clamp

014718635
30-302-3D10G08: RNCC: 3 | RNVC: 2
30-302-3D10G08: RNCC: 3 | RNVC: 2
30-302-3D10G08: RNCC: 3 | RNVC: 2
30-302-3D10G08: RNCC: 3 | RNVC: 2
30-302-3D10G08: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8663
Strain Electrical Conductor Clamp

014718663
30-302-2D07G14: RNCC: 3 | RNVC: 2
30-302-2D07G14: RNCC: 5 | RNVC: 2
30-302-2D07G14: RNCC: 5 | RNVC: 2
30-302-2D07G14: RNCC: 5 | RNVC: 2
30-302-2D07G14: RNCC: 5 | RNVC: 2
BACC10KP2D0714N: RNCC: 5 | RNVC: 9
BACC10KP3D0713N: RNCC: 5 | RNVC: 9

17 Feb 2000

5975-01-471-8615
Strain Electrical Conductor Clamp

014718615
30-302-3D07G12: RNCC: 3 | RNVC: 2
30-302-3D07G12: RNCC: 5 | RNVC: 2
30-302-3D07G12: RNCC: 5 | RNVC: 2
30-302-3D07G12: RNCC: 5 | RNVC: 2
30-302-3D07G12: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-471-9800
Strain Electrical Conductor Clamp

014719800
30-302-2D19G06: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0208
Strain Electrical Conductor Clamp

014720208
30-302-1D11G03: RNCC: 1 | RNVC: 2
30-302-1D11G03: RNCC: 3 | RNVC: 2
30-302-1D11G03: RNCC: 3 | RNVC: 2
30-302-1D11G03: RNCC: 3 | RNVC: 2
30-302-1D11G03: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0311
Strain Electrical Conductor Clamp

014720311
30-302-2D06G10: RNCC: 3 | RNVC: 2
30-302-2D06G10: RNCC: 3 | RNVC: 2
30-302-2D06G10: RNCC: 3 | RNVC: 2
30-302-2D06G10: RNCC: 3 | RNVC: 2
30-302-2D06G10: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0451
Strain Electrical Conductor Clamp

014720451
30-302-1C03J12: RNCC: 3 | RNVC: 2
30-302-1C03J12: RNCC: 3 | RNVC: 2
30-302-1C03J12: RNCC: 3 | RNVC: 2
30-302-1C03J12: RNCC: 3 | RNVC: 2
30-302-1C03J12: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0608
Strain Electrical Conductor Clamp

014720608
30-302-2D11G05: RNCC: 1 | RNVC: 2
30-302-2D11G05: RNCC: 3 | RNVC: 2
30-302-2D11G05: RNCC: 3 | RNVC: 2
30-302-2D11G05: RNCC: 3 | RNVC: 2
30-302-2D11G05: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0198
Strain Electrical Conductor Clamp

014720198
30-302-2D08G06: RNCC: 3 | RNVC: 2
30-302-2D08G06: RNCC: 5 | RNVC: 2
30-302-2D08G06: RNCC: 5 | RNVC: 2
30-302-2D08G06: RNCC: 5 | RNVC: 2
30-302-2D08G06: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-472-0794
Strain Electrical Conductor Clamp

014720794
30-302-1C06J03: RNCC: 1 | RNVC: 2
30-302-1C06J03: RNCC: 3 | RNVC: 2
30-302-1C06J03: RNCC: 3 | RNVC: 2
30-302-1C06J03: RNCC: 3 | RNVC: 2
30-302-1C06J03: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-1130
Strain Electrical Conductor Clamp

014721130
30-302-2D05G12: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-474-6245
Electrical Conduit Coupling

014746245
16W195-13: RNCC: 3 | RNVC: 2
16W195-13: RNCC: 5 | RNVC: 2
16W195: RNCC: D | RNVC: 9

9 May 2000

5975-01-476-2878
Junction Box

014762878
71695K21: RNCC: 3 | RNVC: 2

6 Jul 2000

5975-01-476-9284
Flexible Metal Conduit

014769284
600232-2: RNCC: 3 | RNVC: 2
FF9632 PIECE 22: RNCC: D | RNVC: 9

26 Jul 2000

5975-01-477-0185
Junction Box Assembly

014770185
A-225287: RNCC: 3 | RNVC: 2

28 Jul 2000

5975-01-478-6847
Flexible Metal Conduit Assembly

014786847
252406: RNCC: 3 | RNVC: 1
R58HA04B48W010: RNCC: 5 | RNVC: 1
R58HA04B48W010: RNCC: 5 | RNVC: 9

22 Sep 2000

5975-01-480-6200
Cable Collar

014806200
6439423: RNCC: 3 | RNVC: 2
12991313: RNCC: 5 | RNVC: 9

29 Nov 2000

5975-01-481-5805
Electrical Components Tie Down Strap

014815805
AL-04-18-9-C: RNCC: 3 | RNVC: 2
36J127: RNCC: 5 | RNVC: 2
6X750: RNCC: 5 | RNVC: 9

16 Jan 2001

5975-01-484-1217
Electrical Conduit Bushing

014841217
7225874: RNCC: 3 | RNVC: 2
D1415930: RNCC: 5 | RNVC: 2

19 Apr 2001

5975-01-484-9694
Electrical Conduit Locknut

014849694
3617958: RNCC: 3 | RNVC: 2
3617958: RNCC: 5 | RNVC: 2

11 May 2001

5975-01-485-7732
Rigid Metal Conduit Assembly

014857732
23A02336-82: RNCC: 3 | RNVC: 2
93160209: RNCC: 5 | RNVC: 2
3260AS460: RNCC: D | RNVC: 9

6 Jun 2001

5975-01-485-7930
Rigid Metal Conduit Assembly

014857930
23A02336-37: RNCC: 3 | RNVC: 2
93160168: RNCC: 5 | RNVC: 2
3260AS402: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-486-1426
Electrical Nonmetallic Conduit Assembly

014861426
4B69143-157A: RNCC: 3 | RNVC: 2
T8000-016: RNCC: 5 | RNVC: 9
4B69143: RNCC: D | RNVC: 9

20 Jun 2001

5975-01-485-7917
Rigid Metal Conduit Assembly

014857917
23A02336-59: RNCC: 3 | RNVC: 2
93160187: RNCC: 5 | RNVC: 2
3260AS427: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-488-8247
Electrical Components Tie Down Strap

014888247
PLB3S-M30: RNCC: 3 | RNVC: 2

5 Sep 2001

5975-01-488-8344
Electrical Components Tie Down Strap

014888344
MLT6S-CP: RNCC: 3 | RNVC: 2
0241 1662: RNCC: 5 | RNVC: 2

5 Sep 2001

5975-01-486-6598
Electrical-Electronic Equipment Chassis

014866598
1756-A7: RNCC: 3 | RNVC: 2
FN4.9604.902.03: RNCC: 5 | RNVC: 2
40100087: RNCC: 5 | RNVC: 2
AB 0001A: RNCC: 5 | RNVC: 9

10 Jul 2001

5975-01-486-9999
Junction Box Cover

014869999
A1412CHNFSS: RNCC: 3 | RNVC: 2

20 Jul 2001

5975-01-493-2764
Mounting Strap

014932764
17-1-5525-1: RNCC: 3 | RNVC: 2
17-1-5525-1: RNCC: 5 | RNVC: 9
17-1-5525-1: RNCC: C | RNVC: 1

21 Dec 2001

5975-01-495-2507
Electrical Equipment Mounting Base

014952507
12422693: RNCC: 3 | RNVC: 2
12422693: RNCC: 5 | RNVC: 9

11 Mar 2002

5975-01-496-2199
Stuffing Tube Adapter

014962199
CMC-4H-6H: RNCC: 3 | RNVC: 2

8 Apr 2002

5975-01-497-1496
Ground Rod Kit

014971496
583GTEKIT: RNCC: 3 | RNVC: 2
99002C8008-2: RNCC: 7 | RNVC: 2
99002C8008: RNCC: D | RNVC: 9

10 May 2002

5975-01-497-5606
Ground Rod Section

014975606
GDS58: RNCC: 3 | RNVC: 2
99002C8008-8: RNCC: 7 | RNVC: 1
99002C8008: RNCC: D | RNVC: 9

23 May 2002

5975-01-498-1546
Junction Box

014981546
IH3-1: RNCC: 3 | RNVC: 2
IH3-1: RNCC: 3 | RNVC: 9

17 Jun 2002

5975-01-498-0235
Flexible Nonmetallic Conduit

014980235
LCP-350-100: RNCC: 3 | RNVC: 2

12 Jun 2002

5975-01-500-0564
Electrical Equipment Mounting Base

015000564
WG2001AA02: RNCC: 3 | RNVC: 2
WG2001AA02: RNCC: 5 | RNVC: 9

12 Aug 2002

5975-01-500-0268
Electrical Tie Down Mounting Base

015000268
MCMS12-P-C: RNCC: 3 | RNVC: 2

12 Aug 2002

5975-01-500-7579
Electrical Equipment Rack

015007579
SNAP-B12M: RNCC: 3 | RNVC: 2
H771-2801-541: RNCC: 3 | RNVC: 9
437-7068236-512: RNCC: 5 | RNVC: 2
437-7068236-541: RNCC: 5 | RNVC: 2
SNAP-B12M: RNCC: 5 | RNVC: 2
H771-2801-512: RNCC: 5 | RNVC: 9
437-7068236: RNCC: D | RNVC: 9

10 Sep 2002

5975-01-502-3369
Flexible Nonmetallic Conduit

015023369
450204-0240: RNCC: 3 | RNVC: 2

1 Nov 2002

5975-01-502-7627
Electrical-Electronic Equipment Chassis

015027627
713259-1: RNCC: 3 | RNVC: 2
713259-1: RNCC: 5 | RNVC: 2

20 Nov 2002

5975-01-504-7503
Junction Box

015047503
1084-12CHC: RNCC: 3 | RNVC: 2

7 Feb 2003

5975-01-503-8687
Electrical Grounding Plate

015038687
0J13-1287-00: RNCC: 3 | RNVC: 2
OJ13-1278-00: RNCC: 5 | RNVC: 9

10 Jan 2003

5975-01-506-1824
Electrical Conduit Tee

015061824
50644-140814: RNCC: 1 | RNVC: 2
50644-140814: RNCC: 3 | RNVC: 2
687-294NFA14B08C14: RNCC: 5 | RNVC: 2
887-294NFA24B24624: RNCC: 5 | RNVC: 9
50644: RNCC: D | RNVC: 9

25 Mar 2003

5975-01-506-3547
Electrical Components Tie Down Strap

015063547
109499-01: RNCC: 3 | RNVC: 2

27 Mar 2003

5975-01-506-9597
Cable Hanger

015069597
9M-08: RNCC: 3 | RNVC: 2
6512E17FN87: RNCC: D | RNVC: 9

15 Apr 2003

5975-01-506-9610
Cable Hanger

015069610
9M-20: RNCC: 3 | RNVC: 2
6512E17FN82: RNCC: D | RNVC: 9

15 Apr 2003

5975-01-508-7741
Electrical Cable Protector

015087741
GES144F-A-C0: RNCC: 3 | RNVC: 2
973002102-01: RNCC: 5 | RNVC: 1

3 Jun 2003

5975-01-508-5619
Junction Box

015085619
12312790: RNCC: 3 | RNVC: 2

27 May 2003

5975-01-512-7818
Flexible Metal Conduit Assembly

015127818
CA00884-2A2WF3N00500: RNCC: 3 | RNVC: 2
CA00884-2A2WF3N00500: RNCC: 5 | RNVC: 9

10 Sep 2003

5975-01-513-3525
Tiedo Mounting Base

015133525
CB4019G2N750: RNCC: 3 | RNVC: 2

24 Sep 2003

5975-01-515-3614
Electrical Conduit Adapter

015153614
S3844-2524-34G: RNCC: 3 | RNVC: 2

21 Nov 2003

5975-01-515-5079
Interconnecting Box

015155079
901-005-801-107: RNCC: 3 | RNVC: 2

27 Nov 2003

5975-01-516-7673
Electrical Connector Bushing Retainer Nut

015167673
CD09NA-FE: RNCC: 3 | RNVC: 2

20 Jan 2004

5975-01-518-3478
Stuffing Tube

015183478
630B007N123H: RNCC: 3 | RNVC: 2

9 Mar 2004

5975-01-518-1306
Electrical Box Connector

015181306
SHC-1043: RNCC: 3 | RNVC: 2

3 Mar 2004

5975-01-523-6109
Cable Hanger

015236109
168233-B21: RNCC: 3 | RNVC: 2

9 Sep 2004

5975-01-523-8922
Electrical Conduit Adapter

015238922
713AL100NF36132: RNCC: 3 | RNVC: 2

17 Sep 2004

5975-01-523-6306
Interconnecting Box

015236306
12423135: RNCC: 3 | RNVC: 2
12423135: RNCC: 5 | RNVC: 9
FMG-111: RNCC: 5 | RNVC: 9

10 Sep 2004

5975-01-525-3825
Electrical Components Tie Down Strap

015253825
SAE-AS23190: RNCC: 3 | RNVC: 1
AS33671-3-6: RNCC: 3 | RNVC: 2
AS33671-3-6: RNCC: 3 | RNVC: 9
AS33671: RNCC: 5 | RNVC: 1

4 Nov 2004

5975-01-525-1999
Electrical Components Tie Down Strap

015251999
CT-1004N: RNCC: 3 | RNVC: 2

1 Nov 2004

5975-01-526-0757
Junction Box

015260757
33901105: RNCC: 3 | RNVC: 2

7 Dec 2004

5975-01-526-6566
Electrical Box Connector

015266566
266-TB: RNCC: 3 | RNVC: 2
BS-7941-3/8: RNCC: 5 | RNVC: 2

29 Dec 2004

5975-01-527-6214
Electrical Box Connector

015276214
2809513000-P: RNCC: 3 | RNVC: 2

10 Feb 2005

5975-01-529-4199
Electrical-Electronic Equipment Panel

015294199
5749760-053: RNCC: 3 | RNVC: 2
5749060-053: RNCC: 5 | RNVC: 9

15 Apr 2005

5975-01-529-7923
Electrical Conduit Bend

015297923
3T3454: RNCC: 3 | RNVC: 2

2 May 2005

5975-01-532-2882
Strain Electrical Conductor Clamp

015322882
30-302-2D10J15: RNCC: 3 | RNVC: 2
30-302-2D10J15: RNCC: 5 | RNVC: 2
30-302-2D10J15: RNCC: 5 | RNVC: 2
30-302-2D10J15: RNCC: 5 | RNVC: 2
30-302-2D10J15: RNCC: 5 | RNVC: 2

4 Aug 2005

5975-01-534-1456
Cable Marker Sleeve

015341456
SM3-12-1/8 WHT: RNCC: 3 | RNVC: 2
SM12 1/8 WHT: RNCC: 5 | RNVC: 9
LSF000PP: RNCC: D | RNVC: 9

11 Oct 2005

5975-01-534-7874
Electrical Nonmetallic Conduit Assembly

015347874
EXLK-127: RNCC: 3 | RNVC: 2
ECLK-127: RNCC: 5 | RNVC: 2
EXLK-127: RNCC: 5 | RNVC: 9
4SE00442-1-27: RNCC: 5 | RNVC: 9
4SE00442-1-27: RNCC: 7 | RNVC: 2

2 Nov 2005

5975-01-536-1942
Flexible Metal Conduit Assembly

015361942
23A02881-1: RNCC: 3 | RNVC: 2

22 Dec 2005

5975-01-537-5872
Electrical Conduit Adapter

015375872
84-617000-Q1: RNCC: 3 | RNVC: 2

14 Feb 2006

5975-01-538-7938
Rigid Metal Conduit Assembly

015387938
23A02829-11: RNCC: 3 | RNVC: 2

30 Mar 2006

5975-01-537-0956
Flexible Metal Conduit Assembly

015370956
23A02863-39: RNCC: 3 | RNVC: 2

26 Jan 2006

5975-01-539-1564
Electrical Entrance Elbow

015391564
610214: RNCC: 3 | RNVC: 2

12 Apr 2006

5975-01-540-8119
Metallic Raceway

015408119
G3000B: RNCC: 3 | RNVC: 1
12423635-004: RNCC: 7 | RNVC: 2
12423635: RNCC: D | RNVC: 9

5 Jun 2006

5975-01-542-7577
Strain Electrical Conductor Clamp

015427577
5M3153-001: RNCC: 3 | RNVC: 2
457FA036NF20: RNCC: 5 | RNVC: 9

17 Aug 2006

5975-01-543-7762
90 Deg Wireway Tube

015437762
C51226-1: RNCC: 3 | RNVC: 2
C51226-1: RNCC: 5 | RNVC: 9

21 Sep 2006

5975-01-545-0101
Strain Electrical Conductor Clamp

015450101
30-302-2D14G12: RNCC: 3 | RNVC: 2

30 Oct 2006

5975-01-545-5150
Strain Electrical Conductor Clamp

015455150
30-302-2D11J10: RNCC: 3 | RNVC: 2

15 Nov 2006

5975-01-545-5870
Strain Electrical Conductor Clamp

015455870
30-302-2D09J25: RNCC: 3 | RNVC: 2
30-302-2D09J25: RNCC: 5 | RNVC: 2
30-302-2D09J25: RNCC: 5 | RNVC: 2
30-302-2D09J25: RNCC: 5 | RNVC: 2
30-302-2D09J25: RNCC: 5 | RNVC: 2

17 Nov 2006

5975-01-545-7403
Ground Rod Assy

015457403
2000040-X1: RNCC: 3 | RNVC: 2
2000040-X1: RNCC: 3 | RNVC: 9
62-2000040: RNCC: 5 | RNVC: 9
2000040: RNCC: 5 | RNVC: 9

24 Nov 2006

5975-01-487-8201
Metallic Raceway Assembly

014878201
11686137: RNCC: 3 | RNVC: 2

20 Aug 2001

5975-01-491-0132
Electrical Cable Nipple

014910132
12273147-110: RNCC: 1 | RNVC: 2
202F253-50: RNCC: 3 | RNVC: 2
202G253-50: RNCC: 5 | RNVC: 9
12273147: RNCC: D | RNVC: 9

10 Oct 2001

5975-01-518-3476
Stuffing Tube

015183476
630B007N143H: RNCC: 3 | RNVC: 2

9 Mar 2004

5975-01-520-5259
Conduit Outlet

015205259
983-6276: RNCC: 3 | RNVC: 2
15012548: RNCC: 5 | RNVC: 2
4KK795: RNCC: 5 | RNVC: 2
983 6276: RNCC: 5 | RNVC: 2
4KK795: RNCC: 5 | RNVC: 9

14 May 2004

5975-01-522-5938
Rigid Metal Conduit Assembly

015225938
23A02863-70: RNCC: 3 | RNVC: 2

5 Aug 2004

5975-01-524-7903
Blank Panel

015247903
404836: RNCC: 3 | RNVC: 2

18 Oct 2004

5975-01-524-9897
Blank Panel

015249897
ES9737-01: RNCC: 3 | RNVC: 9
ES9737-01: RNCC: 5 | RNVC: 2
174-47709F: RNCC: 5 | RNVC: 9

25 Oct 2004

5975-01-525-8261
Electrical Equipment Rack

015258261
RA 19-6B: RNCC: 3 | RNVC: 2

24 Nov 2004

5975-01-516-9243
Electrical Conduit Adapter

015169243
1KK293: RNCC: 3 | RNVC: 2
1KK293: RNCC: 3 | RNVC: 9
0873930000: RNCC: 5 | RNVC: 2
0873930000: RNCC: 5 | RNVC: 9

24 Jan 2004

5975-01-538-6822
Junction Box

015386822
9333103565: RNCC: 3 | RNVC: 2
031-300-060-153: RNCC: 5 | RNVC: 2

29 Mar 2006

5975-01-538-7959
Rigid Metal Conduit Assembly

015387959
23A02829-31: RNCC: 3 | RNVC: 2

30 Mar 2006

5975-01-539-9186
Electrical Tie Down Mounting Base

015399186
ABM100-S6-D: RNCC: 3 | RNVC: 2

4 May 2006

5975-01-545-0382
Strain Electrical Conductor Clamp

015450382
30-302-2D06G04: RNCC: 3 | RNVC: 2

31 Oct 2006

5975-01-546-0513
Electrical Cable Protector

015460513
A495620300: RNCC: 3 | RNVC: 2
A49562.0300: RNCC: 5 | RNVC: 2
CV185380: RNCC: 5 | RNVC: 2
A49562.0300: RNCC: 5 | RNVC: 2

5 Dec 2006

5975-01-541-5283
Metallic Raceway

015415283
G3000B: RNCC: 3 | RNVC: 1
12423635-002: RNCC: 3 | RNVC: 2
12423635-002: RNCC: 7 | RNVC: 2
12423635: RNCC: D | RNVC: 9

29 Jun 2006

5975-01-546-8566
Rigid Metal Conduit

015468566
68A780629-1001: RNCC: 3 | RNVC: 2

5 Jan 2007

5975-01-463-5938
Flexible Metal Conduit Assembly

014635938
254844-1002: RNCC: 3 | RNVC: 2

29 Mar 1999

5975-01-464-3798
Stuffing Tube

014643798
BACT41Y06: RNCC: 3 | RNVC: 2
G1218A06: RNCC: 5 | RNVC: 9
G1218A6: RNCC: C | RNVC: 1

27 Apr 1999

5975-01-464-9144
Electrical Cable Nipple

014649144
212N1V02: RNCC: 3 | RNVC: 2
9325C08-1409-01: RNCC: 5 | RNVC: 1
9325C08-1409: RNCC: D | RNVC: 9

13 May 1999

5975-01-465-7559
Flexible Nonmetallic Conduit

014657559
SAE-AS81914/1: RNCC: 3 | RNVC: 1
M81914/1-1104: RNCC: 3 | RNVC: 2
M81914/1-1104: RNCC: 5 | RNVC: 9

21 Jun 1999

5975-01-466-4554
Electrical Equipment Mounting Base

014664554
10208-1018-01: RNCC: 3 | RNVC: 2

20 Jul 1999

5975-01-469-7952
Stuffing Tube Plug

014697952
WD-4010: RNCC: 3 | RNVC: 2

24 Nov 1999

5975-01-471-8561
Strain Electrical Conductor Clamp

014718561
30-302-1D10J03: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8567
Strain Electrical Conductor Clamp

014718567
30-302-2D04J11: RNCC: 3 | RNVC: 2
30-302-2D04J11: RNCC: 5 | RNVC: 2
30-302-2D04J11: RNCC: 5 | RNVC: 2
30-302-2D04J11: RNCC: 5 | RNVC: 2
30-302-2D04J11: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-472-0183
Strain Electrical Conductor Clamp

014720183
30-302-1D03G12: RNCC: 1 | RNVC: 2
30-302-1D03G12: RNCC: 3 | RNVC: 2
30-302-1D03G12: RNCC: 3 | RNVC: 2
30-302-1D03G12: RNCC: 3 | RNVC: 2
30-302-1D03G12: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0174
Strain Electrical Conductor Clamp

014720174
30-302-1D03G10: RNCC: 1 | RNVC: 2
30-302-1D03G10: RNCC: 3 | RNVC: 2
30-302-1D03G10: RNCC: 3 | RNVC: 2
30-302-1D03G10: RNCC: 3 | RNVC: 2
30-302-1D03G10: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0295
Strain Electrical Conductor Clamp

014720295
30-302-1D10G03: RNCC: 3 | RNVC: 2
30-302-1D10G03: RNCC: 5 | RNVC: 2
30-302-1D10G03: RNCC: 5 | RNVC: 2
30-302-1D10G03: RNCC: 5 | RNVC: 2
30-302-1D10G03: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-472-0469
Strain Electrical Conductor Clamp

014720469
30-302-1C12J03: RNCC: 1 | RNVC: 2
30-302-1C12J03: RNCC: 3 | RNVC: 2
30-302-1C12J03: RNCC: 3 | RNVC: 2
30-302-1C12J03: RNCC: 3 | RNVC: 2
30-302-1C12J03: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0490
Strain Electrical Conductor Clamp

014720490
30-302-2D04G16: RNCC: 3 | RNVC: 2
30-302-2D04G16: RNCC: 5 | RNVC: 2
30-302-2D04G16: RNCC: 5 | RNVC: 2
30-302-2D04G16: RNCC: 5 | RNVC: 2
30-302-2D04G16: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-472-0559
Strain Electrical Conductor Clamp

014720559
30-302-2D05G17: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0723
Strain Electrical Conductor Clamp

014720723
30-302-2D07G04: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-485-7728
Rigid Metal Conduit Assembly

014857728
3260AS451: RNCC: 1 | RNVC: 2
23A02336-76: RNCC: 3 | RNVC: 2
93160203: RNCC: 5 | RNVC: 1

6 Jun 2001

5975-01-484-7703
Electrical Components Tie Down Strap

014847703
6-850-000801: RNCC: 3 | RNVC: 2

8 May 2001

5975-01-485-7710
Rigid Metal Conduit Assembly

014857710
23A02336-23: RNCC: 3 | RNVC: 2
93160157: RNCC: 5 | RNVC: 1
3260AS386: RNCC: D | RNVC: 9

6 Jun 2001

5975-01-485-7938
Rigid Metal Conduit Assembly

014857938
23A02336-109: RNCC: 3 | RNVC: 2
93160160: RNCC: 5 | RNVC: 1
23A02336-27: RNCC: 5 | RNVC: 9
3260AS391: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-485-8116
Electrical Conduit Bushing

014858116
BU-501: RNCC: 3 | RNVC: 2

7 Jun 2001

5975-01-473-2764
Electrical Cable Protector

014732764
195A051-1: RNCC: 3 | RNVC: 2
195A051-1: RNCC: 3 | RNVC: 2
195A051: RNCC: D | RNVC: 9

3 Apr 2000

5975-01-475-5007
Electrical Box Connector

014755007
8KK865: RNCC: 3 | RNVC: 2
8KK865: RNCC: 5 | RNVC: 9
CA011011: RNCC: 5 | RNVC: 9

6 Jun 2000

5975-01-475-6288
Electronic Equipment Mounting Tray

014756288
816255-1: RNCC: 3 | RNVC: 2
697949-3: RNCC: 3 | RNVC: 2
697949-3: RNCC: 5 | RNVC: 9

8 Jun 2000

5975-01-476-2877
Conduit Outlet Cover

014762877
71695K23: RNCC: 3 | RNVC: 2

6 Jul 2000

5975-01-477-5925
Electrical Cable Nipple

014775925
885-325-002: RNCC: 3 | RNVC: 2
74-990081-219: RNCC: D | RNVC: 9

14 Aug 2000

5975-01-478-5339
Rigid Metal Conduit

014785339
68A230605-2003A: RNCC: 3 | RNVC: 2

15 Sep 2000

5975-01-478-8677
Guide Rail

014788677
A383870100: RNCC: 3 | RNVC: 2
A38387.0100: RNCC: 5 | RNVC: 2

29 Sep 2000

5975-01-480-0708
Electrical Equipment Mounting Base

014800708
PE-00-163: RNCC: 3 | RNVC: 2

7 Nov 2000

5975-01-481-0837
Electrical Wall Plate

014810837
84020-40: RNCC: 3 | RNVC: 9

11 Jun 2001

5975-01-491-1941
Electrical Equipment Rack

014911941
MODEL 3018-2: RNCC: 3 | RNVC: 2

15 Oct 2001

5975-01-491-9276
Electrical Components Tie Down Strap

014919276
SAE-AS23190: RNCC: 3 | RNVC: 1
MS3367-3-5: RNCC: 3 | RNVC: 2
MS3367-3-5: RNCC: 3 | RNVC: 9
AS33671: RNCC: 5 | RNVC: 1
MS3367-3-5: RNCC: 5 | RNVC: 9
AS33671: RNCC: 5 | RNVC: 9

6 Nov 2001

5975-01-494-7691
Blank Panel

014947691
GP500DG6: RNCC: 3 | RNVC: 2

22 Feb 2002

5975-01-495-4712
Electrical Conduit Adapter

014954712
711HS078NF1314-4: RNCC: 3 | RNVC: 2
S4270FM67145-34-4: RNCC: 3 | RNVC: 2
63A155258P33: RNCC: 7 | RNVC: 2

18 Mar 2002

5975-01-495-5223
Wire Strand Hanger

014955223
185669TY3,A10: RNCC: 3 | RNVC: 1

19 Mar 2002

5975-01-495-2613
Electrical Equipment Mounting Base

014952613
12422697: RNCC: 3 | RNVC: 2
12422697: RNCC: 5 | RNVC: 9

11 Mar 2002

5975-01-497-0431
Ground Rod

014970431
S582ST: RNCC: 3 | RNVC: 2
99002C8008-4: RNCC: 7 | RNVC: 1
99002C8008: RNCC: D | RNVC: 9

7 May 2002

5975-01-500-1100
Electronic Equipment Mounting Tray

015001100
T600-2-S-R-A-100: RNCC: 3 | RNVC: 2
T600-2-S-R-A-100: RNCC: 5 | RNVC: 9

13 Aug 2002

5975-01-500-6410
Electrical Components Tie Down Strap

015006410
PL3M2SL: RNCC: 3 | RNVC: 2

5 Sep 2002

5975-01-497-9070
Flexible Nonmetallic Conduit

014979070
SAE-AS81914/6: RNCC: 3 | RNVC: 1
M81914/6-1006: RNCC: 3 | RNVC: 2
AMS-T81914/6: RNCC: 5 | RNVC: 9
M81914/6-1006: RNCC: 5 | RNVC: 9
MIL-T-81914: RNCC: 5 | RNVC: 9
SAE AS81914/6: RNCC: 5 | RNVC: 9

7 Jun 2002

5975-01-501-4218
Two Way Connector

015014218
54506: RNCC: 3 | RNVC: 2

1 Oct 2002

5975-01-502-6103
Interconnecting Box

015026103
901-005-825-105: RNCC: 3 | RNVC: 2

14 Nov 2002

5975-01-506-3560
Electrical Components Tie Down Strap

015063560
015-4609-030: RNCC: 3 | RNVC: 2
600-052-1: RNCC: 3 | RNVC: 2
GS874AE2: RNCC: 5 | RNVC: 2

27 Mar 2003

5975-01-506-9162
Cable Hanger

015069162
SAMTAN0250: RNCC: 3 | RNVC: 2
6512E17FN80: RNCC: D | RNVC: 9

14 Apr 2003

5975-01-507-6544
Tiedo Mounting Base

015076544
CB4020G3N6-750: RNCC: 3 | RNVC: 2

1 May 2003

5975-01-508-7371
Electrical Conduit Adapter

015087371
711DS078NF2232-4: RNCC: 3 | RNVC: 2
949239970-23: RNCC: 5 | RNVC: 2
711-078: RNCC: D | RNVC: 9

2 Jun 2003

5975-01-509-8119
Rigid Metal Conduit Assembly

015098119
23A02881-5: RNCC: 3 | RNVC: 2

3 Jul 2003

5975-01-511-5014
Rigid Metal Conduit

015115014
6620521: RNCC: 3 | RNVC: 2
6620521: RNCC: 5 | RNVC: 9

11 Aug 2003

5975-01-512-7844
Flexible Metal Conduit Assembly

015127844
CA00884-3A3WG3W01220: RNCC: 3 | RNVC: 2
CA00884-3A3WG2W01220: RNCC: 5 | RNVC: 9

10 Sep 2003

5975-01-513-7634
Spacer Hinge

015137634
8036672: RNCC: 3 | RNVC: 2
D70166: RNCC: 5 | RNVC: 2
8036672: RNCC: 5 | RNVC: 9

6 Oct 2003

5975-01-513-4607
Electrical Components Tie Down Strap

015134607
RT250R: RNCC: 3 | RNVC: 2
3516934C1: RNCC: 5 | RNVC: 2
3516934C1: RNCC: 5 | RNVC: 9

25 Sep 2003

5975-01-515-4238
Ground Rod

015154238
532672-01-01: RNCC: 3 | RNVC: 2
532672-01-01: RNCC: 5 | RNVC: 9
532672: RNCC: D | RNVC: 9

25 Nov 2003

5975-01-516-2607
Electrical Nonmetallic Conduit Assembly

015162607
57350-35FT0IN: RNCC: 3 | RNVC: 2
57350-35: RNCC: 3 | RNVC: 9

29 Dec 2003

5975-01-516-3152
Flexible Metal Conduit

015163152
UA-OR-1/2: RNCC: 3 | RNVC: 2
U.A.-O.R. TRADE SIZE 1/2: RNCC: 5 | RNVC: 2
90006E1801-2: RNCC: 7 | RNVC: 2

31 Dec 2003

5975-01-526-5769
Aircraf Blank Panel

015265769
9M381B8E: RNCC: 3 | RNVC: 2
9M381B8E: RNCC: 5 | RNVC: 9

23 Dec 2004

5975-01-526-5656
Electrical Wall Plate

015265656
12524769: RNCC: 3 | RNVC: 2
AT215: RNCC: 5 | RNVC: 2

22 Dec 2004

5975-01-526-0995
Electrical Components Tie Down Strap

015260995
L-5-50-9-C: RNCC: 3 | RNVC: 9
L-5-50-9-C: RNCC: 5 | RNVC: 2
7130K47: RNCC: 5 | RNVC: 2
7130K47: RNCC: 5 | RNVC: 9

7 Dec 2004

5975-01-526-4920
Flexible Metal Conduit

015264920
78822: RNCC: 3 | RNVC: 2

20 Dec 2004

5975-01-518-3287
Electronic Equipment Mounting Tray

015183287
7593369: RNCC: 3 | RNVC: 2
EMD0001098: RNCC: 5 | RNVC: 2
233-502: RNCC: 5 | RNVC: 9
PSC0000000158: RNCC: 5 | RNVC: 9

9 Mar 2004

5975-01-531-5868
Junction Box

015315868
5361-0: RNCC: 3 | RNVC: 2

14 Jul 2005

5975-01-532-2963
Strain Electrical Conductor Clamp

015322963
30-302-1D09G16: RNCC: 3 | RNVC: 2

4 Aug 2005

5975-01-533-2647
Electrical Equipment Shelf

015332647
44000889: RNCC: 3 | RNVC: 2

8 Sep 2005

5975-01-533-8531
Junction Box

015338531
3654AS910-1: RNCC: 3 | RNVC: 2
3654AS910-1: RNCC: 5 | RNVC: 2

29 Sep 2005

5975-01-533-8491
Electrical-Electronic Equipment Panel

015338491
3654AS604-1: RNCC: 3 | RNVC: 2
3654AS604-1: RNCC: 3 | RNVC: 2

29 Sep 2005

5975-01-534-4612
Blank Panel

015344612
XPN-1019-F: RNCC: 3 | RNVC: 2
PN-10F: RNCC: 3 | RNVC: 9
3654AS200-28: RNCC: 5 | RNVC: 2
3654AS200: RNCC: D | RNVC: 9

24 Oct 2005

5975-01-534-9247
Flexible Metal Conduit Assembly

015349247
EXLK-318: RNCC: 3 | RNVC: 2
EXLK318: RNCC: 5 | RNVC: 2
4SE00442-3-18: RNCC: 5 | RNVC: 9
4SE00442-3-18: RNCC: 7 | RNVC: 2

8 Nov 2005

5975-01-535-1835
Electrical Tie Down Mounting Base

015351835
MB4A10-C2: RNCC: 3 | RNVC: 2
MB4A10: RNCC: 5 | RNVC: 9

18 Nov 2005

5975-01-536-1941
Flexible Metal Conduit Assembly

015361941
23A02863-30: RNCC: 3 | RNVC: 2

22 Dec 2005

5975-01-536-4549
Flexible Metal Conduit Assembly

015364549
23A02863-47: RNCC: 3 | RNVC: 2

5 Jan 2006

5975-01-536-8304
Electrical Components Tie Down Strap

015368304
PLT5S-C: RNCC: 3 | RNVC: 2
02402655: RNCC: 5 | RNVC: 2
PLT5S-C: RNCC: 5 | RNVC: 2
PLT5S-C: RNCC: 5 | RNVC: 9

18 Jan 2006

5975-01-536-8537
Electrical-Electronic Equipment Chassis

015368537
626R612H01: RNCC: 3 | RNVC: 2

18 Jan 2006

5975-01-538-0826
Electrical Equipment Leg Section

015380826
87001C0122: RNCC: 3 | RNVC: 2

9 Mar 2006

5975-01-537-3366
Cable Marker Sleeve

015373366
SS7074-510: RNCC: 3 | RNVC: 2

2 Feb 2006

5975-01-538-3927
Electrical Box Connector

015383927
773-166: RNCC: 3 | RNVC: 9
773-166: RNCC: 5 | RNVC: 9

21 Mar 2006

5975-01-543-8352
Electrical Conduit Adapter

015438352
TX-40-AB00-1410-H: RNCC: 3 | RNVC: 2

22 Sep 2006

5975-01-543-1055
Junction Box

015431055
5333-0: RNCC: 3 | RNVC: 2
4A243: RNCC: 5 | RNVC: 2
5333-0: RNCC: 5 | RNVC: 2
0212350 FIND 2: RNCC: 5 | RNVC: 2

30 Aug 2006

5975-01-540-0822
Metallic Raceway

015400822
12423636-006: RNCC: 3 | RNVC: 2
12423636-006: RNCC: 5 | RNVC: 2

9 May 2006

5975-01-540-8338
Raceway Coupler

015408338
G4011FO: RNCC: 3 | RNVC: 2
12443790: RNCC: 7 | RNVC: 2

6 Jun 2006

5975-01-541-0821
Electrical Conduit Adapter

015410821
TX-40-AB00-1408-H: RNCC: 3 | RNVC: 2

14 Jun 2006

5975-01-543-7761
Short Wireway Tube

015437761
B93672-1: RNCC: 3 | RNVC: 2
B93672-1: RNCC: 5 | RNVC: 9

21 Sep 2006

5975-01-545-0109
Electrical-Electronic Equipment Chassis

015450109
1064501-1: RNCC: 3 | RNVC: 2
1064501-1: RNCC: 5 | RNVC: 2
1064501-1: RNCC: 5 | RNVC: 9

30 Oct 2006

5975-01-544-7432
Electrical Components Tie Down Strap

015447432
SAE-AS23190: RNCC: 3 | RNVC: 1
SAE AS33671-4-9: RNCC: 3 | RNVC: 2
SAE AS33671-4-9: RNCC: 3 | RNVC: 9

20 Oct 2006

5975-01-546-5074
Electrical Tie Down Mounting Base

015465074
16N876: RNCC: 3 | RNVC: 2

19 Dec 2006

5975-01-549-7866
Ground Rod Section

015497866
87034-004: RNCC: 3 | RNVC: 2

29 Mar 2007

5975-01-269-5607
Electrical Equipment Mounting Base

012695607
DSK-9-03602-501: RNCC: 3 | RNVC: 2
MT-6592/ARC: RNCC: 5 | RNVC: 9
DSK-9-03602-501: RNCC: 5 | RNVC: 9
DSK-9-03602-501: RNCC: 5 | RNVC: 9

18 Dec 1987

5975-01-296-6063
Fanning Strip

012966063
7517533-12: RNCC: 3 | RNVC: 2
7517533-12: RNCC: 3 | RNVC: 9
7517533-12: RNCC: 5 | RNVC: 2

23 Mar 1989

5975-01-413-8329
Flexible Nonmetallic Conduit

014138329
15005-100: RNCC: 3 | RNVC: 2
15005: RNCC: 5 | RNVC: 9
15005-100: RNCC: 5 | RNVC: 9

23 May 1995

5975-01-414-7816
Electrical Conduit Sealing Fitting

014147816
EYSF-75: RNCC: 3 | RNVC: 2

14 Jun 1995

5975-01-417-9229
Blank Panel

014179229
075-100080-00: RNCC: 3 | RNVC: 2

17 Aug 1995

5975-01-436-2750
Electrical Conductor Bushing

014362750
1741AS730-3: RNCC: 3 | RNVC: 2
185520-FB5100: RNCC: 5 | RNVC: 9
1741AS730-3: RNCC: 7 | RNVC: 2

16 Sep 1996

5975-01-436-3619
Electrical Conduit Ferrule

014363619
185512-FB5100: RNCC: 3 | RNVC: 2
1741AS738-2: RNCC: 7 | RNVC: 2

17 Sep 1996

5975-01-436-3622
Electrical Conduit Ferrule

014363622
185532-FB5100: RNCC: 3 | RNVC: 2
1741AS738-4: RNCC: 7 | RNVC: 2

17 Sep 1996

5975-01-440-1323
Electrical Equipment Shelf

014401323
A3104088-1: RNCC: 3 | RNVC: 2

4 Jan 1997

5975-01-431-1399
Electrical Equipment Mounting Base

014311399
1007177: RNCC: 3 | RNVC: 2
DM-SM-0301-5: RNCC: 5 | RNVC: 9
DM-SM-0301-5: RNCC: 5 | RNVC: 9
DM-SM-0300-05: RNCC: D | RNVC: 9

8 May 1996

5975-01-434-1754
Electrical Nonmetallic Conduit Assembly

014341754
R58HB06B34A120: RNCC: 3 | RNVC: 2
R58HB06B34A120: RNCC: 5 | RNVC: 2
R58HB06B34A120: RNCC: 5 | RNVC: 2
R58HB06B34A120: RNCC: 5 | RNVC: 9

22 Jul 1996

5975-01-284-5483
Junction Box

012845483
BI-3-M59: RNCC: 3 | RNVC: 2
GJ800AU1M: RNCC: 3 | RNVC: 2
GJ800AU: RNCC: 7 | RNVC: 1

26 Aug 1988

5975-01-286-7471
Lower Corner Bar

012867471
6122918: RNCC: 3 | RNVC: 2

7 Oct 1988

5975-01-288-2897
Junction Box

012882897
07545200A: RNCC: 3 | RNVC: 2
75452-2-A: RNCC: 5 | RNVC: 9
75452-2-A: RNCC: 5 | RNVC: 9
801625-027 PIECE 3: RNCC: 5 | RNVC: 9

4 Nov 1988

5975-01-288-4923
Junction Box Assembly

012884923
4B69151-129A: RNCC: 3 | RNVC: 2

8 Nov 1988

5975-01-289-5970
Electrical Conduit Adapter

012895970
3AF100AA1924AD: RNCC: 3 | RNVC: 2
150325: RNCC: 3 | RNVC: 2
3AD100AA1924AD: RNCC: 5 | RNVC: 1

27 Nov 1988

5975-01-288-9603
Electrical Conduit Coupling

012889603
A1022A157-3: RNCC: 3 | RNVC: 2

17 Nov 1988

5975-01-291-7455
Flexible Metal Conduit

012917455
F05001001: RNCC: 3 | RNVC: 2

5 Jan 1989

5975-01-294-3474
Electrical Components Tie Down Strap

012943474
MS3368-4-9: RNCC: 2 | RNVC: 2
AS33681: RNCC: 5 | RNVC: 1
AS33681: RNCC: 5 | RNVC: 9

15 Feb 1989

5975-01-295-4166
Dust And Moisture Seal Boot

012954166
CES-2-T1: RNCC: 3 | RNVC: 2

5 Mar 1989

5975-01-296-6065
Fanning Strip

012966065
7517533-14: RNCC: 3 | RNVC: 9
7517533-14: RNCC: 5 | RNVC: 9

23 Mar 1989

5975-01-296-7092
Fanning Strip

012967092
7517533-20: RNCC: 3 | RNVC: 2

23 Mar 1989

5975-01-296-7102
Flexible Metal Conduit Assembly

012967102
251020-01710: RNCC: 3 | RNVC: 1
750-011NF32-171: RNCC: 3 | RNVC: 1
200188-DI1710: RNCC: 3 | RNVC: 1
10250675-91: RNCC: 7 | RNVC: 2

23 Mar 1989

5975-01-296-7108
Flexible Metal Conduit Assembly

012967108
251018-00710: RNCC: 3 | RNVC: 2
750-011NF20-71: RNCC: 3 | RNVC: 2
200186-DI0710: RNCC: 3 | RNVC: 2
10250675-72: RNCC: 7 | RNVC: 2

23 Mar 1989

5975-01-297-6128
Electrical Conduit Adapter

012976128
100235-0014: RNCC: 3 | RNVC: 2
G63164-14: RNCC: 3 | RNVC: 2
100019-FB6200: RNCC: 3 | RNVC: 2
10250710-14: RNCC: 7 | RNVC: 2

4 Apr 1989

5975-01-297-6806
Junction Box

012976806
A20H16BLP: RNCC: 3 | RNVC: 2
A2H16BLP: RNCC: 5 | RNVC: 9
513366-3: RNCC: 7 | RNVC: 1

5 Apr 1989

5975-01-298-3732
Flexible Conduit Assembly

012983732
5188105-45: RNCC: 1 | RNVC: 2
5188105-45: RNCC: 3 | RNVC: 2
759-192-45: RNCC: 3 | RNVC: 2
206-45: RNCC: 3 | RNVC: 2
759-192-0600: RNCC: 5 | RNVC: 9
206045-DI0600: RNCC: 5 | RNVC: 9

14 Apr 1989

5975-01-299-3356
Electrical Tie Down Mounting Base

012993356
FCM3-S6-14: RNCC: 3 | RNVC: 2
3598066-4: RNCC: 7 | RNVC: 2

30 Apr 1989

5975-01-301-5399
Electrical Conduit Union

013015399
997 5101: RNCC: 3 | RNVC: 2

31 May 1989

5975-01-302-9637
Flexible Metal Conduit Assembly

013029637
750-011NF48-52.5: RNCC: 3 | RNVC: 1
200207-DI0525: RNCC: 3 | RNVC: 1
10250675-107: RNCC: 3 | RNVC: 2

22 Jun 1989

5975-01-300-4665
Electrical Conduit Coupling

013004665
202C221-13: RNCC: 3 | RNVC: 2
C2086-8-2: RNCC: 7 | RNVC: 2

14 May 1989

5975-01-304-3199
Lower Side Bar

013043199
6122942: RNCC: 3 | RNVC: 2

16 Jul 1989

5975-01-307-0806
Junction Box

013070806
2483075: RNCC: 3 | RNVC: 2

7 Sep 1989

5975-01-308-8749
Flexible Metal Conduit Assembly

013088749
251016-01624: RNCC: 3 | RNVC: 2
750-011NF12-162.5: RNCC: 3 | RNVC: 2
200205-DI162.5: RNCC: 3 | RNVC: 2
750-011NF12-1625: RNCC: 3 | RNVC: 9
10250675-53: RNCC: 7 | RNVC: 2

6 Oct 1989

5975-01-311-7344
Electrical Conductor Bushing

013117344
6239629: RNCC: 3 | RNVC: 2

5 Dec 1989

5975-01-314-4747
Cable Hanger

013144747
1718830: RNCC: 3 | RNVC: 2
1718830: RNCC: 5 | RNVC: 9

31 Jan 1990

5975-01-314-7057
Electrical Equipment Cabinet

013147057
A423012LP: RNCC: 3 | RNVC: 2
A423012LP: RNCC: 5 | RNVC: 9
88131809: RNCC: C | RNVC: 1
SPN12SS6-423012: RNCC: C | RNVC: 1
868653-5: RNCC: C | RNVC: 1

4 Feb 1990

5975-01-318-1135
Blank Panel

013181135
521167-1: RNCC: 3 | RNVC: 2

13 Apr 1990

5975-01-319-5584
Electrical Conduit Adapter

013195584
2613235-14: RNCC: 3 | RNVC: 2
S1816C3403-8: RNCC: 5 | RNVC: 2

10 May 1990

5975-01-319-5585
Electrical Conduit Adapter

013195585
2613235-10: RNCC: 3 | RNVC: 2
S1816C1604-8: RNCC: 5 | RNVC: 2

10 May 1990

5975-01-319-8113
Stuffing Tube

013198113
M24235/14-001 BRASS: RNCC: 2 | RNVC: 2
MIL-S-24235/14: RNCC: 4 | RNVC: 1

15 May 1990

5975-01-321-3999
Strain Electrical Conductor Clamp

013213999
650441E00: RNCC: 3 | RNVC: 2
650441FIG8-55-05: RNCC: 5 | RNVC: 1
650441-E: RNCC: 5 | RNVC: 9

16 Jun 1990

5975-01-322-4256
Electrical Conduit Elbow

013224256
50643HE1932: RNCC: 1 | RNVC: 2
710HE010NF1932: RNCC: 3 | RNVC: 2

5 Jul 1990

5975-01-344-0888
Stuffing Tube Packing Nut

013440888
M24235/14-064: RNCC: 2 | RNVC: 2

22 Aug 1991

5975-01-354-9989
Electrical Box Connector

013549989
2691: RNCC: 3 | RNVC: 2
850: RNCC: 5 | RNVC: 9

10 Mar 1992

5975-01-361-5034
Stuffing Tube

013615034
W130801-2: RNCC: 3 | RNVC: 2
W130801-2: RNCC: 3 | RNVC: 9
W130801-2: RNCC: 5 | RNVC: 9
W130801-2: RNCC: C | RNVC: 1

18 Jul 1992

5975-01-362-1476
Ground Rod

013621476
8030003601-1: RNCC: 3 | RNVC: 9

1 Aug 1992

5975-01-362-2110
Electrical Box Connector

013622110
CGB114-SG: RNCC: 3 | RNVC: 2
13229E0880-2: RNCC: 5 | RNVC: 1

2 Aug 1992

5975-01-362-5099
Electrical-Electronic Equipment Panel

013625099
68R810036-1001: RNCC: 3 | RNVC: 2

7 Aug 1992

5975-01-362-7220
Cable Hanger

013627220
1220B0092: RNCC: 3 | RNVC: 2
1220B0092: RNCC: 5 | RNVC: 9

14 Aug 1992

5975-01-364-5195
Electrical Cable Protector

013645195
654446-1: RNCC: 1 | RNVC: 2
100-0002-113: RNCC: 3 | RNVC: 2
654446-1: RNCC: 5 | RNVC: 9

22 Sep 1992

5975-01-369-3080
Electrical Cable Protector

013693080
12931319: RNCC: 3 | RNVC: 2

19 Dec 1992

5975-01-374-2169
Blank Panel

013742169
A20P16: RNCC: 3 | RNVC: 2

18 Apr 1993

5975-01-377-9293
Electrical Components Tie Down Strap

013779293
3820723: RNCC: 3 | RNVC: 2
3820723: RNCC: 5 | RNVC: 2
3820723: RNCC: 5 | RNVC: 2
3820723: RNCC: 5 | RNVC: 9

4 Aug 1993

5975-01-381-6755
Stuffing Tube

013816755
637S010NF0408A: RNCC: 3 | RNVC: 2

21 Oct 1993

5975-01-387-4350
Flexible Metal Conduit Assembly

013874350
57350-14: RNCC: 3 | RNVC: 2
57350-14 FT0IN: RNCC: 3 | RNVC: 2

5 Mar 1994

5975-01-387-4637
Flexible Metal Conduit Assembly

013874637
57350-31 FT 0 IN: RNCC: 3 | RNVC: 2
57350-31: RNCC: 5 | RNVC: 9

5 Mar 1994

5975-01-387-4530
Flexible Metal Conduit Assembly

013874530
57350-13FT0IN: RNCC: 3 | RNVC: 2
57350-13: RNCC: 5 | RNVC: 9

5 Mar 1994

5975-01-387-5035
Flexible Metal Conduit Assembly

013875035
57350-21FT0IN: RNCC: 3 | RNVC: 2
57350-21: RNCC: 5 | RNVC: 9

5 Mar 1994

5975-01-324-6821
Ground Rod Clamp

013246821
GRC-50-02B: RNCC: 3 | RNVC: 9
J8591H: RNCC: 5 | RNVC: 2
7491K73: RNCC: 5 | RNVC: 9

21 Aug 1990

5975-01-329-7360
Electrical Cable Nipple

013297360
202F263-51-10/164: RNCC: 3 | RNVC: 2
12910598-10: RNCC: 5 | RNVC: 2
12273147-6-1.1-10/9: RNCC: 7 | RNVC: 2

21 Nov 1990

5975-01-331-3371
Electrical Box Connector

013313371
CGB114SA: RNCC: 3 | RNVC: 2
23036274-1: RNCC: 7 | RNVC: 2

17 Dec 1990

5975-01-333-8443
Flexible Metal Conduit Assembly

013338443
11973-0013: RNCC: 3 | RNVC: 2
LE161-0021-0013: RNCC: 7 | RNVC: 2

10 Feb 1991

5975-01-334-4817
Junction Box

013344817
SW30568: RNCC: 3 | RNVC: 2

23 Feb 1991

5975-01-334-3966
Electrical Wall Plate

013343966
WR281-C: RNCC: 3 | RNVC: 2
5147: RNCC: 5 | RNVC: 2
2CCD: RNCC: 5 | RNVC: 9

21 Feb 1991

5975-01-335-9194
Electrical Wall Plate

013359194
2CCB: RNCC: 3 | RNVC: 2
5176: RNCC: 5 | RNVC: 2
5175-0: RNCC: 5 | RNVC: 2
SP411-G: RNCC: 5 | RNVC: 9

15 Mar 1991

5975-01-338-1919
Electrical Components Tie Down Strap

013381919
4019567-1: RNCC: 3 | RNVC: 2

28 Apr 1991

5975-01-338-2931
Electrical Conduit Tee

013382931
50644-24: RNCC: 1 | RNVC: 2
710-032NFA24B24C24: RNCC: 3 | RNVC: 2

30 Apr 1991

5975-01-342-8320
Cable Hanger

013428320
302-6693690PC24: RNCC: 3 | RNVC: 1
185669TY3,A-7: RNCC: 5 | RNVC: 1

31 Jul 1991

5975-01-343-2232
Mesh Sleeve

013432232
102-002-024: RNCC: 3 | RNVC: 2

8 Aug 1991

5975-01-343-2255
Compression Fitting

013432255
50841: RNCC: 3 | RNVC: 2

8 Aug 1991

5975-01-394-4068
Conduit Outlet

013944068
FDT-1-100: RNCC: 3 | RNVC: 2
FDT-3: RNCC: 5 | RNVC: 9
8611356-202: RNCC: D | RNVC: 9

9 Aug 1994

5975-01-397-2088
Ground Rod

013972088
10075-1274: RNCC: 3 | RNVC: 2

5 Oct 1994

5975-01-408-6360
Cable Marker Sleeve

014086360
100906-0013: RNCC: 3 | RNVC: 2
GS830GY3: RNCC: 5 | RNVC: 1

22 Feb 1995

5975-01-412-1517
Electrical Conduit Adapter

014121517
1058AS1380-2: RNCC: 3 | RNVC: 2
1058AS1380-2: RNCC: 5 | RNVC: 2
1058AS1380-2: RNCC: 5 | RNVC: 9

12 Apr 1995

5975-01-420-7298
Cable Terminal Chamber

014207298
5944485: RNCC: 3 | RNVC: 2

24 Oct 1995

5975-01-422-6391
Electrical Nonmetallic Conduit Assembly

014226391
R58HB18G49W010A: RNCC: 3 | RNVC: 2
R58HB18G49W010A: RNCC: 5 | RNVC: 9

5 Dec 1995

5975-01-422-6394
Electrical Nonmetallic Conduit Assembly

014226394
R58HB33B34X015: RNCC: 3 | RNVC: 2
R58HB33B34X015: RNCC: 5 | RNVC: 9

5 Dec 1995

5975-01-422-6403
Electrical Nonmetallic Conduit Assembly

014226403
R58HB16H16Y096F: RNCC: 3 | RNVC: 1
R58HB16H16Y096F: RNCC: 3 | RNVC: 2
R58HB16H16Y096F: RNCC: 5 | RNVC: 9

5 Dec 1995

5975-01-423-2087
Electrical Insulation Sleeving

014232087
TMS-SCE-1/4-2.0-9: RNCC: 3 | RNVC: 2
10652298-004: RNCC: 5 | RNVC: 2
TMS-SCE-1/4-2.0-9: RNCC: 5 | RNVC: 2
G1-22-9107-1: RNCC: 7 | RNVC: 1

18 Dec 1995

5975-01-423-0447
Electrical Equipment Mounting Base

014230447
34200575-001: RNCC: 3 | RNVC: 2

14 Dec 1995

5975-01-426-3279
Electronic Junction Rack

014263279
M81714/16-3: RNCC: 2 | RNVC: 2
MIL-T-81714/16: RNCC: 4 | RNVC: 1
TJT703004: RNCC: 5 | RNVC: 2

8 Mar 1996

5975-01-429-0022
Electrical Nonmetallic Conduit Assembly

014290022
300595: RNCC: 3 | RNVC: 2
70700-77910-101: RNCC: 7 | RNVC: 2

4 Apr 1996

5975-01-430-1943
Electrical Box Connector

014301943
7267K41: RNCC: 3 | RNVC: 2
7798K41: RNCC: 5 | RNVC: 2
7267K41: RNCC: C | RNVC: 1

24 Apr 1996

5975-01-440-3214
Electrical Fitting Mounting Base

014403214
A3103996-1: RNCC: 3 | RNVC: 2

10 Jan 1997

5975-01-440-4550
Electrical Conduit Nipple

014404550
1.250 TRADE SIZE: RNCC: 3 | RNVC: 2
1.250 TRADE SIZE: RNCC: 5 | RNVC: 9
1741AS731-4: RNCC: 7 | RNVC: 2
1741AS731: RNCC: D | RNVC: 9

14 Jan 1997

5975-01-440-7763
Electrical Cable Protector

014407763
12366455: RNCC: 3 | RNVC: 2
12366455: RNCC: 5 | RNVC: 2
12366455: RNCC: 5 | RNVC: 9

24 Jan 1997

5975-01-441-6942
Electrical Box Connector

014416942
13344922: RNCC: 3 | RNVC: 2

21 Feb 1997

5975-01-443-2304
Electrical Equipment Shelf

014432304
A3014087-1: RNCC: 3 | RNVC: 2

4 Apr 1997

5975-01-444-9479
Electronic Equipment Mounting Tray

014449479
752-9588-001: RNCC: 3 | RNVC: 2

20 May 1997

5975-01-445-6162
Electrical Equipment Mounting Base

014456162
822-0789-001: RNCC: 3 | RNVC: 2
MT-7106/ARC-220(V): RNCC: 5 | RNVC: 2
200-3438-00: RNCC: 5 | RNVC: 2

6 Jun 1997

5975-01-446-1716
Spring Retainer

014461716
546A588P001: RNCC: 3 | RNVC: 2
546A588P001: RNCC: 5 | RNVC: 9

25 Jun 1997

5975-01-451-2238
Rigid Metal Conduit Assembly

014512238
68A250649-2052: RNCC: 3 | RNVC: 2

9 Dec 1997

5975-01-451-3728
Cable Hanger

014513728
101-107-461: RNCC: 3 | RNVC: 2

15 Dec 1997

5975-01-451-1883
Insulator Bracket

014511883
68A250649-2073: RNCC: 3 | RNVC: 2

8 Dec 1997

5975-01-453-5808
Electrical-Electronic Equipment Chassis

014535808
748064-A00: RNCC: 3 | RNVC: 2
748070-K01PC7: RNCC: 5 | RNVC: 2

4 Mar 1998

5975-01-456-1572
Electrical-Electronic Equipment Panel

014561572
NW35381: RNCC: 3 | RNVC: 2
DCN-351JN188: RNCC: 5 | RNVC: 2

2 Jun 1998

5975-01-453-0101
Flexible Metal Conduit Assembly

014530101
57350-26FT0IN: RNCC: 3 | RNVC: 2
57350-26: RNCC: 5 | RNVC: 9

17 Feb 1998

5975-01-458-4338
Electronic Equipment Mounting Tray

014584338
12983540: RNCC: 3 | RNVC: 2

26 Aug 1998

5975-01-458-4726
Blank Panel

014584726
4042861-0501: RNCC: 3 | RNVC: 2
4042861-0501: RNCC: 5 | RNVC: 2

27 Aug 1998

5975-01-460-6572
Electrical Conduit Adapter

014606572
R-21: RNCC: 3 | RNVC: 2
0650150B: RNCC: 5 | RNVC: 9

12 Nov 1998

5975-01-461-7448
Electrical-Electronic Equipment Chassis

014617448
908100-1: RNCC: 3 | RNVC: 2
74-870311-101: RNCC: 5 | RNVC: 2
D-57/ALE-50: RNCC: 5 | RNVC: 2

31 Dec 1998

5975-01-461-6849
Metallic Raceway Assembly

014616849
74D115122-1007: RNCC: 3 | RNVC: 2

24 Dec 1998

5975-01-461-7852
Flexible Nonmetallic Conduit

014617852
09-30-028-1.61FT: RNCC: 3 | RNVC: 2
3418AS6346: RNCC: 3 | RNVC: 2

5 Jan 1999

5975-01-462-6966
Electrical Components Tie Down Strap

014626966
560-9092A: RNCC: 3 | RNVC: 2

12 Feb 1999

5975-01-462-7311
Stuffing Tube

014627311
1990.12 SIZE N TYPE 67: RNCC: 3 | RNVC: 2
1990.12 SIZE A TYPE 67: RNCC: 5 | RNVC: 9
9000S620274269: RNCC: 5 | RNVC: 9
9000S620274269-152: RNCC: 5 | RNVC: 9

16 Feb 1999

5975-01-462-7315
Stuffing Tube

014627315
1990.15 SIZE S TYPE 67: RNCC: 3 | RNVC: 2
9000S620274269: RNCC: 5 | RNVC: 2
9000S620274269-155: RNCC: 5 | RNVC: 2
1990.15 SIZE A TYPE 67: RNCC: 5 | RNVC: 9

16 Feb 1999

5975-01-462-7320
Stuffing Tube

014627320
1990.8 SIZE J TYPE 67: RNCC: 3 | RNVC: 2
9000S620274269: RNCC: 5 | RNVC: 9
9000S620274269-148: RNCC: 5 | RNVC: 9
1990.8 SIZE A TYPE 67: RNCC: 5 | RNVC: 9

16 Feb 1999

5975-01-462-7233
Stuffing Tube

014627233
1990.16 SIZE T TYPE 67: RNCC: 3 | RNVC: 2
9000S620274269-156: RNCC: 5 | RNVC: 2
9000S620274269: RNCC: 5 | RNVC: 2
1990.16 SIZE A TYPE 67: RNCC: 5 | RNVC: 9

13 Feb 1999

5975-01-283-3303
Junction Box

012833303
963R: RNCC: 3 | RNVC: 2

2 Aug 1988

5975-01-284-5515
Electrical Conduit Tee

012845515
21110: RNCC: 3 | RNVC: 2

26 Aug 1988

5975-01-296-6064
Fanning Strip

012966064
7517533-13: RNCC: 3 | RNVC: 9
7517533-13: RNCC: 5 | RNVC: 9

23 Mar 1989

5975-01-326-6509
Cable Shield Adapter

013266509
GA/CSGA-B/NPT: RNCC: 3 | RNVC: 2
CSGA-B/NPT: RNCC: 5 | RNVC: 2
CSGA-B/NPT: RNCC: 5 | RNVC: 9
SEEPA-NF-B-A: RNCC: 5 | RNVC: 9

28 Sep 1990

5975-01-359-2599
Electrical Equipment Mounting Base

013592599
687-3732-001: RNCC: 3 | RNVC: 2

1 Jun 1992

5975-01-335-7656
Electrical Conduit Adapter

013357656
G70685-32: RNCC: 3 | RNVC: 2
GB840Y32: RNCC: 7 | RNVC: 2

13 Mar 1991

5975-01-359-4810
Cable Strain Relief Bushing

013594810
1247: RNCC: 3 | RNVC: 9
1247-HEYCO: RNCC: 5 | RNVC: 2
1247: RNCC: 5 | RNVC: 2
836-1247: RNCC: 5 | RNVC: 2
1247: RNCC: 5 | RNVC: 2
1247: RNCC: 5 | RNVC: 2
1247: RNCC: 5 | RNVC: 2
1247: RNCC: 5 | RNVC: 2
2000284-1: RNCC: 7 | RNVC: 2

6 Jun 1992

5975-01-360-4298
Flexible Metal Conduit

013604298
34222: RNCC: 3 | RNVC: 2

24 Jun 1992

5975-01-421-7903
Protection Connector Kit

014217903
6317971-002: RNCC: 3 | RNVC: 2
HCPS-SS4: RNCC: 5 | RNVC: 2
HCPS-SS4: RNCC: 5 | RNVC: 9
HCPS-SS4: RNCC: 5 | RNVC: 9
HCPS-SS4: RNCC: 5 | RNVC: 9
6317971: RNCC: D | RNVC: 9

15 Nov 1995

5975-01-430-1035
Electrical Equipment Mounting Base

014301035
C5174271: RNCC: 3 | RNVC: 9
202-100103: RNCC: 5 | RNVC: 2

23 Apr 1996

5975-01-416-3552
Protection Connector Kit

014163552
6317971-022: RNCC: 1 | RNVC: 2
HCPS-79: RNCC: 3 | RNVC: 2
HCPS-79: RNCC: 5 | RNVC: 9
HCPS-79: RNCC: 5 | RNVC: 9
HCPS-79: RNCC: 5 | RNVC: 9
HCPS-79: RNCC: C | RNVC: 1

17 Jul 1995

5975-01-433-7710
Junction Box Cover

014337710
1003346: RNCC: 3 | RNVC: 2

10 Jul 1996

5975-01-432-6527
Flexible Metal Conduit Assembly

014326527
10250675-85: RNCC: 3 | RNVC: 2
200187-D11860: RNCC: 3 | RNVC: 2
750-011NF24-186: RNCC: 5 | RNVC: 2

11 Jun 1996

5975-01-388-5641
Electrical Grounding Plate

013885641
PK9GTA: RNCC: 3 | RNVC: 2
C5173686: RNCC: 7 | RNVC: 9

4 Apr 1994

5975-01-398-2690
Conduit Outlet

013982690
T75-M: RNCC: 3 | RNVC: 2
T75-M: RNCC: 5 | RNVC: 9

28 Oct 1994

5975-01-413-6423
Blank Panel

014136423
A24P16: RNCC: 3 | RNVC: 2

18 May 1995

5975-01-434-9019
Electrical Components Tie Down Strap

014349019
2105292-1: RNCC: 3 | RNVC: 2
2105292-1: RNCC: 5 | RNVC: 9

9 Aug 1996

5975-01-287-2449
Electrical-Electronic Equipment Chassis

012872449
717513174-009: RNCC: 3 | RNVC: 2

19 Oct 1988

5975-01-286-7472
Upper Side Bar

012867472
6122951: RNCC: 3 | RNVC: 2

7 Oct 1988

5975-01-286-7483
Stuffing Tube Gland Ring

012867483
M24235/17-273: RNCC: 2 | RNVC: 2
MIL-S-24235/17: RNCC: 4 | RNVC: 1

7 Oct 1988

5975-01-288-3240
Electrical Equipment Cabinet

012883240
949-00003: RNCC: 3 | RNVC: 9

4 Nov 1988

5975-01-289-1061
Outer Sleeve

012891061
478629: RNCC: 3 | RNVC: 2

17 Nov 1988

5975-01-290-7638
Terminal Junction Block End Section

012907638
1492N23: RNCC: 3 | RNVC: 2
1492-N23: RNCC: C | RNVC: 1

16 Dec 1988

5975-01-290-9904
Electrical-Electronic Equipment Panel

012909904
2038155-0501: RNCC: 3 | RNVC: 2

21 Dec 1988

5975-01-292-1882
Junction Box Cover

012921882
84254-1: RNCC: 3 | RNVC: 2

12 Jan 1989

5975-01-294-6558
Cable Hanger

012946558
101-107-181: RNCC: 3 | RNVC: 2

19 Feb 1989

5975-01-295-8312
Electrical-Electronic Equipment Panel

012958312
545-1916591 ASSY 1: RNCC: 3 | RNVC: 2

12 Mar 1989

5975-01-296-6062
Fanning Strip

012966062
7517533-11: RNCC: 3 | RNVC: 9
7517533-11: RNCC: 5 | RNVC: 9

23 Mar 1989

5975-01-296-6066
Fanning Strip

012966066
7517533-15: RNCC: 3 | RNVC: 9
7517533-15: RNCC: 5 | RNVC: 9

23 Mar 1989

5975-01-296-7085
Electrical Conduit Wye

012967085
186681-FB6200: RNCC: 3 | RNVC: 9
CH09-0340-303: RNCC: 5 | RNVC: 9
G63160-3: RNCC: 5 | RNVC: 9
101005: RNCC: 5 | RNVC: 9
150141: RNCC: 5 | RNVC: 9
10250677-3: RNCC: 7 | RNVC: 2

23 Mar 1989

5975-01-296-7097
Fanning Strip

012967097
7517533-24: RNCC: 3 | RNVC: 9
7517533-25: RNCC: 5 | RNVC: 9

23 Mar 1989

5975-01-296-7096
Fanning Strip

012967096
7517533-24: RNCC: 3 | RNVC: 2

23 Mar 1989

5975-01-296-7103
Flexible Metal Conduit Assembly

012967103
251020-01680: RNCC: 3 | RNVC: 2
750-011NF32-168: RNCC: 3 | RNVC: 2
200188-DI1680: RNCC: 3 | RNVC: 2
10250675-92: RNCC: 7 | RNVC: 2

23 Mar 1989

5975-01-296-7893
Fanning Strip

012967893
7517533-41: RNCC: 3 | RNVC: 2

24 Mar 1989

5975-01-296-7913
Fanning Strip

012967913
7517533-33: RNCC: 3 | RNVC: 9
7517533-33: RNCC: 5 | RNVC: 9

24 Mar 1989

5975-01-296-7915
Fanning Strip

012967915
7517533-35: RNCC: 3 | RNVC: 9
7517533-35: RNCC: 5 | RNVC: 9

24 Mar 1989

5975-01-297-6130
Electrical Conduit Adapter

012976130
100235-0036: RNCC: 3 | RNVC: 1
G63164-36: RNCC: 3 | RNVC: 1
100156-FB6200: RNCC: 3 | RNVC: 1
10250710-36: RNCC: 3 | RNVC: 2

4 Apr 1989

5975-01-298-0416
Electrical Nonmetallic Conduit Assembly

012980416
R58HB33B34X030: RNCC: 3 | RNVC: 2
R58HB33B34X030: RNCC: 3 | RNVC: 2
R58HB33B34X030: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 9

9 Apr 1989

5975-01-302-1959
Electrical Components Tie Down Strap

013021959
TC347A: RNCC: 3 | RNVC: 2
TC347A: RNCC: 5 | RNVC: 2

10 Jun 1989

5975-01-302-8288
Flexible Metal Conduit Assembly

013028288
750-011NF08-24: RNCC: 3 | RNVC: 1
200204-DI0240: RNCC: 3 | RNVC: 1
10250675-36: RNCC: 7 | RNVC: 2

21 Jun 1989

5975-01-303-9428
Electrical Conductor Bushing

013039428
507253-6: RNCC: 3 | RNVC: 2
507253-6: RNCC: 5 | RNVC: 9

8 Jul 1989

5975-01-304-1549
Electrical Equipment Mounting Base

013041549
TOLA-S2A10: RNCC: 3 | RNVC: 2

13 Jul 1989

5975-01-303-1335
Mounting Channel

013031335
9080GH111: RNCC: 3 | RNVC: 2

24 Jun 1989

5975-01-304-6321
Electrical Conduit Adapter

013046321
S2182F1562-1-12C: RNCC: 3 | RNVC: 2
GA801HL17F12CC: RNCC: 7 | RNVC: 2

21 Jul 1989

5975-01-305-3815
Electrical Cable Protector

013053815
7222327-10: RNCC: 3 | RNVC: 2

4 Aug 1989

5975-01-304-7127
Electrical-Electronic Equipment Panel

013047127
NIOP02: RNCC: 3 | RNVC: 2
6632098: RNCC: 5 | RNVC: 1
NIODP02: RNCC: 5 | RNVC: 2
6632098J2: RNCC: 5 | RNVC: 2

26 Jul 1989

5975-01-303-8289
Electrical Cable Assembly Protector

013038289
3824910-7: RNCC: 3 | RNVC: 2
3824910-7: RNCC: 5 | RNVC: 2

7 Jul 1989

5975-01-308-8745
Flexible Metal Conduit Assembly

013088745
10250675-100: RNCC: 3 | RNVC: 2
200188-D11400: RNCC: 5 | RNVC: 1

6 Oct 1989

5975-01-309-7609
Electrical-Electronic Equipment Panel

013097609
0N363513-501: RNCC: 3 | RNVC: 2

22 Oct 1989

5975-01-311-4865
Electrical Components Tie Down Strap

013114865
PLT4I-C: RNCC: 3 | RNVC: 2
5244M: RNCC: 5 | RNVC: 2
PLT41: RNCC: 5 | RNVC: 9

29 Nov 1989

5975-01-313-8183
Electrical Conduit Adapter

013138183
10250710-6: RNCC: 3 | RNVC: 2
G63164-6: RNCC: 3 | RNVC: 9
100235-0006: RNCC: 5 | RNVC: 9
100011-FB6200: RNCC: 5 | RNVC: 9

18 Jan 1990

5975-01-313-8184
Electrical Conduit Adapter

013138184
G63164-33: RNCC: 3 | RNVC: 2
100235-0033: RNCC: 3 | RNVC: 2
100214-FB6200: RNCC: 3 | RNVC: 2
10250710-33: RNCC: 7 | RNVC: 2

18 Jan 1990

5975-01-315-0742
Wire Feed Adapter Assembly

013150742
21130: RNCC: 3 | RNVC: 2

9 Feb 1990

5975-01-318-0879
Flexible Nonmetallic Conduit

013180879
64496-R: RNCC: 3 | RNVC: 2

12 Apr 1990

5975-01-313-2023
Junction Box Cover

013132023
65560-03150-068: RNCC: 3 | RNVC: 2

3 Jan 1990

NSN 5975-01-319-6609 013196609 STRAP,TIE DOWN,ELECTRICAL COMPONENTS

5975-01-319-6609
Electrical Components Tie Down Strap

013196609
CT6NT40-C: RNCC: 3 | RNVC: 2
CT6NT40-C: RNCC: 3 | RNVC: 9
WIT-30R-MIL: RNCC: 5 | RNVC: 9
6225: RNCC: 5 | RNVC: 9
06225: RNCC: 5 | RNVC: 9

11 May 1990

5975-01-319-4697
Electrical Conduit Adapter

013194697
2613235-12: RNCC: 3 | RNVC: 2
S1816C3105-8: RNCC: 5 | RNVC: 2

8 May 1990

5975-01-321-5653
Cable Marker Sleeve

013215653
DAT-35-292-1: RNCC: 3 | RNVC: 2
111-1430035: RNCC: C | RNVC: 1

20 Jun 1990

5975-01-322-4431
Junction Box

013224431
BIC-3-J59: RNCC: 3 | RNVC: 2

6 Jul 1990

5975-01-320-6932
Electrical Conduit Elbow

013206932
50643HE1516: RNCC: 3 | RNVC: 2
710HD217NF1516: RNCC: 5 | RNVC: 2

2 Jun 1990

5975-01-322-4430
Junction Box

013224430
BIC-3-F59: RNCC: 3 | RNVC: 2

6 Jul 1990

5975-01-323-1615
Stuffing Tube Packing Nut

013231615
M24231/9-011: RNCC: 2 | RNVC: 2
MIL-DTL-24231/9: RNCC: 4 | RNVC: 1

23 Jul 1990

5975-01-323-9219
Metallic Raceway

013239219
1479AS101-5: RNCC: 3 | RNVC: 2

5 Aug 1990

5975-01-324-4684
Electrical-Electronic Equipment Panel

013244684
960517-1: RNCC: 3 | RNVC: 2

19 Aug 1990

5975-01-326-0267
Electrical Equipment Rack

013260267
920-13422: RNCC: 3 | RNVC: 2

16 Sep 1990

5975-01-351-3873
Junction Box

013513873
808087-0-51: RNCC: 3 | RNVC: 2
3505-14ITEM99: RNCC: 3 | RNVC: 9
3505-14ITEM99: RNCC: C | RNVC: 1

8 Jan 1992

5975-01-352-0286
Stuffing Tube

013520286
NCGB2234-SG: RNCC: 3 | RNVC: 2
13229E0738-1: RNCC: D | RNVC: 9

18 Jan 1992

5975-01-352-1481
Rackmount Kit

013521481
Y5737: RNCC: 3 | RNVC: 2

21 Jan 1992

5975-01-354-7446
Electrical-Electronic Equipment Chassis

013547446
1531470: RNCC: 3 | RNVC: 2
1531470: RNCC: 5 | RNVC: 9

5 Mar 1992

5975-01-355-3476
Electrical Box Connector

013553476
2520-2: RNCC: 3 | RNVC: 2
2520-2: RNCC: 5 | RNVC: 2
2520-2: RNCC: 5 | RNVC: 2
6-294-007653: RNCC: 5 | RNVC: 9
2HG334: RNCC: C | RNVC: 1

14 Mar 1992

5975-01-355-8484
Electrical Conduit Coupling

013558484
2922: RNCC: 3 | RNVC: 2
2922: RNCC: 5 | RNVC: 9

25 Mar 1992

5975-01-328-8985
Junction Box

013288985
9004-529: RNCC: 3 | RNVC: 2
9004-529: RNCC: 5 | RNVC: 9

9 Nov 1990

5975-01-360-0399
Electrical Components Tie Down Strap

013600399
AS33861: RNCC: 3 | RNVC: 1
MS3368-3-OE: RNCC: 3 | RNVC: 2
PL2M2S-L0: RNCC: 5 | RNVC: 1
AS33861: RNCC: 5 | RNVC: 9
MS3368-3-OE: RNCC: 5 | RNVC: 9
MS3368-3-0E: RNCC: 5 | RNVC: 9

17 Jun 1992

5975-01-337-7336
Insulator Bracket Strap

013377336
5167447: RNCC: 3 | RNVC: 2
5167447: RNCC: 5 | RNVC: 2

21 Apr 1991

5975-01-342-8321
Cable Hanger

013428321
302-6693690PC27: RNCC: 3 | RNVC: 2
185669TY3,A-12: RNCC: 5 | RNVC: 9

31 Jul 1991

5975-01-343-4335
Electrical Components Tie Down Strap

013434335
17620300-01: RNCC: 3 | RNVC: 2
17620301: RNCC: 7 | RNVC: 2

13 Aug 1991

5975-01-363-8369
Electrical-Electronic Equipment Panel

013638369
5820578G1: RNCC: 3 | RNVC: 2
5850750: RNCC: 5 | RNVC: 2
5850756: RNCC: 5 | RNVC: 2

6 Sep 1992

5975-01-363-5690
Electronic Junction Rack

013635690
CTJ3A04-4021: RNCC: 3 | RNVC: 2

1 Sep 1992

5975-01-369-2905
Electrical Conductor Bushing

013692905
G70685-24: RNCC: 3 | RNVC: 2
GB840Y24: RNCC: 7 | RNVC: 2

19 Dec 1992

5975-01-369-1835
Electrical-Electronic Equipment Chassis

013691835
6063337-2: RNCC: 3 | RNVC: 2

17 Dec 1992

5975-01-371-1529
Electrical Conduit Coupling

013711529
P100NBKA: RNCC: 3 | RNVC: 2
P100NBKA: RNCC: 3 | RNVC: 9
950.028-1: RNCC: 5 | RNVC: 2
950.028-1: RNCC: 5 | RNVC: 9

7 Feb 1993

5975-01-373-5863
Electrical Equipment Foot

013735863
FE-10: RNCC: 3 | RNVC: 9

7 Apr 1993

5975-01-376-5775
Flexible Metal Conduit Assembly

013765775
750-070-007: RNCC: 3 | RNVC: 2
11468897-007: RNCC: 7 | RNVC: 2

6 Jun 1993

5975-01-380-6874
Flexible Metal Conduit Assembly

013806874
750-070-008: RNCC: 3 | RNVC: 1
228823-D10350: RNCC: 3 | RNVC: 1
750-070-408: RNCC: 5 | RNVC: 9
11468897-008: RNCC: 7 | RNVC: 2

24 Sep 1993

5975-01-379-4997
Electrical Components Tie Down Strap

013794997
PLT3S-C0: RNCC: 3 | RNVC: 2
PLT3S-C0: RNCC: 5 | RNVC: 2

31 Aug 1993

5975-01-380-6521
Electrical-Electronic Equipment Chassis

013806521
77-081891-02: RNCC: 3 | RNVC: 2
77-081891-02: RNCC: 3 | RNVC: 9
77-081891-02: RNCC: 5 | RNVC: 2
10177067: RNCC: 6 | RNVC: 9

23 Sep 1993

5975-01-380-0236
Blank Panel

013800236
1569AS482: RNCC: 3 | RNVC: 2

13 Sep 1993

5975-01-384-2394
Stuffing Tube

013842394
S81910B-05: RNCC: 3 | RNVC: 2
S81910B-05: RNCC: 3 | RNVC: 9
5223460-3: RNCC: 7 | RNVC: 2

10 Dec 1993

5975-01-386-8443
Electrical Cable Nipple

013868443
23517: RNCC: 3 | RNVC: 2
5975013868443: RNCC: 6 | RNVC: 9
SW32916: RNCC: 7 | RNVC: 2

17 Feb 1994

5975-01-387-1753
Conduit Outlet

013871753
FW60/100: RNCC: 3 | RNVC: 2
9123802: RNCC: 5 | RNVC: 9
9123802-01: RNCC: 5 | RNVC: 9

25 Feb 1994

5975-01-387-4351
Flexible Metal Conduit Assembly

013874351
57350-11: RNCC: 3 | RNVC: 2
57350-11 FT0IN: RNCC: 3 | RNVC: 2

5 Mar 1994

5975-01-387-4800
Cable Hanger

013874800
12418458: RNCC: 3 | RNVC: 2
12418458: RNCC: 3 | RNVC: 2
12418458: RNCC: 5 | RNVC: 2
124188458: RNCC: 5 | RNVC: 9

5 Mar 1994

5975-01-387-6259
Cable Insert Special Block

013876259
RM 20/16: RNCC: 3 | RNVC: 2
RM 20/16: RNCC: 5 | RNVC: 2

9 Mar 1994

5975-01-387-5044
Electrical-Electronic Equipment Panel

013875044
743244REVD: RNCC: 3 | RNVC: 2

5 Mar 1994

5975-01-391-7175
Electrical Nonmetallic Conduit Assembly

013917175
57350-20FT0IN: RNCC: 3 | RNVC: 2
57350-20: RNCC: 5 | RNVC: 9

16 Jun 1994

5975-01-398-2734
Electrical Components Tie Down Strap

013982734
SAE-AS23190: RNCC: 3 | RNVC: 1
MS3367-6-6: RNCC: 3 | RNVC: 2
AS33671: RNCC: 5 | RNVC: 1
MS3367-6-6: RNCC: 5 | RNVC: 9
AS33671: RNCC: 5 | RNVC: 9

28 Oct 1994

5975-01-396-3128
Junction Box

013963128
1425AS214: RNCC: 3 | RNVC: 2
1425AS214: RNCC: 5 | RNVC: 2

18 Sep 1994

5975-01-399-0621
Electrical Conduit Elbow

013990621
LMF90-50: RNCC: 3 | RNVC: 2

16 Nov 1994

5975-01-412-1516
Electrical Conduit Adapter

014121516
1058AS1380-1: RNCC: 3 | RNVC: 2
1058AS1380-1: RNCC: 5 | RNVC: 2
1058AS1380-1: RNCC: 5 | RNVC: 9

12 Apr 1995

5975-01-429-2967
Electrical-Electronic Equipment Panel

014292967
C004870-01: RNCC: 3 | RNVC: 2

8 Apr 1996

5975-01-436-2749
Electrical Conductor Bushing

014362749
1741AS730-2: RNCC: 3 | RNVC: 2
1741AS730-2: RNCC: 7 | RNVC: 2

16 Sep 1996

5975-01-432-2149
Electrical Equipment Rack Base

014322149
741315-A00: RNCC: 3 | RNVC: 2
8-12-35: RNCC: 5 | RNVC: 9
741315-A: RNCC: 5 | RNVC: 9

29 May 1996

5975-01-436-3616
Junction Box

014363616
1741AS431: RNCC: 1 | RNVC: 2
1741AS431-2: RNCC: 3 | RNVC: 2
A-1412NFSS: RNCC: 5 | RNVC: 2

17 Sep 1996

5975-01-436-6716
Electrical Components Tie Down Strap

014366716
MS3368-4-6D: RNCC: 3 | RNVC: 2
MS3368-4-6D: RNCC: 3 | RNVC: 9
AS33681: RNCC: 5 | RNVC: 1
MS3368-4-6D: RNCC: 5 | RNVC: 9
AS33681: RNCC: 5 | RNVC: 9
MS3367-4-7D: RNCC: 5 | RNVC: 9

25 Sep 1996

5975-01-440-1592
Metallic Raceway

014401592
741183-B00: RNCC: 3 | RNVC: 2
8-48-8: RNCC: 5 | RNVC: 9
741183-B: RNCC: 5 | RNVC: 9

6 Jan 1997

5975-01-443-2396
Blank Panel

014432396
32146-03: RNCC: 3 | RNVC: 2
79C0056-00: RNCC: 5 | RNVC: 2

4 Apr 1997

5975-01-445-1632
Electrical Components Tie Down Strap

014451632
MLT4H-LP-321: RNCC: 3 | RNVC: 2
4110T20P02: RNCC: 3 | RNVC: 2

27 May 1997

5975-01-417-3594
Rigid Metal Conduit

014173594
1339AS962-7: RNCC: 3 | RNVC: 2

5 Aug 1995

5975-01-452-1275
Electrical Conduit Adapter

014521275
M72-2387: RNCC: 3 | RNVC: 2

16 Jan 1998

5975-01-453-3965
Electrical Nonmetallic Conduit Assembly

014533965
1328AS620-3: RNCC: 3 | RNVC: 1
1328AS620-3: RNCC: 3 | RNVC: 2

27 Feb 1998

5975-01-455-5887
Electronic Equipment Mounting Tray

014555887
5879885G3: RNCC: 3 | RNVC: 2
697960-3: RNCC: 3 | RNVC: 2
5879885G003: RNCC: 5 | RNVC: 1
697960-3: RNCC: 5 | RNVC: 1
5879885G003: RNCC: 5 | RNVC: 1

7 May 1998

5975-01-455-6631
Electrical Components Tie Down Strap

014556631
1559AS177-1: RNCC: 3 | RNVC: 2
6X752-1: RNCC: 5 | RNVC: 2
6X752: RNCC: C | RNVC: 1

11 May 1998

5975-01-455-6036
Electrical-Electronic Equipment Chassis

014556036
9612248-10: RNCC: 3 | RNVC: 2

7 May 1998

5975-01-461-7544
Stuffing Tube

014617544
M24235/14-121: RNCC: 2 | RNVC: 2
MIL-T-81714/14: RNCC: 4 | RNVC: 1
R00127: RNCC: 5 | RNVC: 9

31 Dec 1998

5975-01-461-7594
Stuffing Tube

014617594
M24235/15-009: RNCC: 2 | RNVC: 2
MIL-S-24235/15B: RNCC: 4 | RNVC: 1

31 Dec 1998

5975-01-462-1795
Stuffing Tube

014621795
M24235/14-131: RNCC: 2 | RNVC: 2
MIL-S-24235: RNCC: 4 | RNVC: 1

25 Jan 1999

5975-01-462-5664
Electrical Box Entry Flange

014625664
12466839: RNCC: 3 | RNVC: 2

9 Feb 1999

5975-01-462-7495
Electrical Conduit Adapter

014627495
712S214NF4032-2: RNCC: 3 | RNVC: 2
GA801UR1C40322: RNCC: 5 | RNVC: 2

17 Feb 1999

5975-01-436-2330
Electrical Conduit Coupling

014362330
2.000 TRADE SIZE: RNCC: 3 | RNVC: 2
1741AS732-5: RNCC: 7 | RNVC: 2

14 Sep 1996

5975-01-436-3621
Electrical Conduit Ferrule

014363621
1741AS738: RNCC: 1 | RNVC: 2
185520-FB5100: RNCC: 3 | RNVC: 2
1741AS738-3: RNCC: 5 | RNVC: 2

17 Sep 1996

5975-01-443-1149
Electrical Box Connector

014431149
5344: RNCC: 3 | RNVC: 2

2 Apr 1997

5975-01-434-9018
Electrical Components Tie Down Strap

014349018
2105292-2: RNCC: 3 | RNVC: 2

9 Aug 1996

5975-01-444-9475
Electronic Equipment Mounting Tray

014449475
752-9586-001: RNCC: 3 | RNVC: 2

20 May 1997

5975-01-287-8022
Conduit Outlet

012878022
LB67: RNCC: 3 | RNVC: 2
LB67: RNCC: 3 | RNVC: 2
OLB-6: RNCC: 5 | RNVC: 2

27 Oct 1988

5975-01-288-7083
Electrical Conduit Coupling

012887083
92021: RNCC: 3 | RNVC: 2

13 Nov 1988

5975-01-291-7028
Channel Mounting

012917028
9080-GH118: RNCC: 3 | RNVC: 2

4 Jan 1989

5975-01-294-9093
Cable Hanger

012949093
1060: RNCC: 3 | RNVC: 2
101-107-180: RNCC: 5 | RNVC: 2

24 Feb 1989

5975-01-296-6067
Fanning Strip

012966067
7517533-16: RNCC: 3 | RNVC: 9
7517533-16: RNCC: 5 | RNVC: 9

23 Mar 1989

5975-01-296-7093
Fanning Strip

012967093
7517533-21: RNCC: 3 | RNVC: 2

23 Mar 1989

5975-01-296-7916
Fanning Strip

012967916
7517533-36: RNCC: 3 | RNVC: 9
7517533-36: RNCC: 5 | RNVC: 9

24 Mar 1989

5975-01-296-7918
Fanning Strip

012967918
7517533-38: RNCC: 3 | RNVC: 9
7517533-38: RNCC: 5 | RNVC: 9

24 Mar 1989

5975-01-297-0497
Junction Box

012970497
6602853: RNCC: 3 | RNVC: 2
6602853: RNCC: 5 | RNVC: 9

28 Mar 1989

5975-01-297-6700
Cable Strain Relief Bushing

012976700
46N7806: RNCC: 3 | RNVC: 2
TYPE SRF-40: RNCC: 5 | RNVC: 9

5 Apr 1989

5975-01-298-4648
Flexible Conduit Assembly

012984648
5188105-10: RNCC: 1 | RNVC: 2
759-192-10: RNCC: 3 | RNVC: 2
206010-DI0160: RNCC: 3 | RNVC: 2

17 Apr 1989

5975-01-298-1519
Flexible Conduit Assembly

012981519
5188105-15: RNCC: 1 | RNVC: 2
759-192-15: RNCC: 3 | RNVC: 2
206015-DI0510: RNCC: 3 | RNVC: 2

12 Apr 1989

5975-01-298-9236
Junction Box

012989236
A16H1208SSLP: RNCC: 3 | RNVC: 2

23 Apr 1989

5975-01-301-6290
Flexible Nonmetallic Conduit

013016290
49408-010: RNCC: 3 | RNVC: 2
49408-010: RNCC: 3 | RNVC: 9
49408: RNCC: 5 | RNVC: 9

2 Jun 1989

5975-01-302-9634
Flexible Metal Conduit Assembly

013029634
750-011NF48-28.5: RNCC: 3 | RNVC: 2
200207-DI0285: RNCC: 3 | RNVC: 2
10250675-103: RNCC: 7 | RNVC: 2

22 Jun 1989

5975-01-305-3814
Electrical Cable Protector

013053814
7222327-09: RNCC: 3 | RNVC: 2

4 Aug 1989

5975-01-307-0807
Junction Box

013070807
2483077: RNCC: 3 | RNVC: 2
5SE01599: RNCC: C | RNVC: 1

7 Sep 1989

5975-01-307-7680
Cable Hanger

013077680
15002: RNCC: 3 | RNVC: 2

16 Sep 1989

5975-01-308-8872
Electrical Conduit Locknut

013088872
146SL: RNCC: 3 | RNVC: 2

6 Oct 1989

5975-01-311-1604
Electrical Conductor Bushing

013111604
44787-502: RNCC: 3 | RNVC: 2

21 Nov 1989

5975-01-313-8182
Electrical Conduit Adapter

013138182
100235-0012: RNCC: 3 | RNVC: 2
G63164-12: RNCC: 5 | RNVC: 2
100017-FB200: RNCC: 5 | RNVC: 2
10250710-12: RNCC: 5 | RNVC: 9
100017-FB6200: RNCC: 5 | RNVC: 9

18 Jan 1990

5975-01-313-8207
Stuffing Tube

013138207
M24235/14-007: RNCC: 2 | RNVC: 2
MIL-S-24235: RNCC: 4 | RNVC: 1

18 Jan 1990

5975-01-314-2942
Cable Hanger

013142942
1716084 ASSY7, TY8 8 IN: RNCC: 3 | RNVC: 2

27 Jan 1990

5975-01-316-7691
Junction Box

013167691
M24142/5-003: RNCC: 2 | RNVC: 2
MIL-E-24142/5: RNCC: 4 | RNVC: 1

15 Mar 1990

5975-01-319-2561
Electrical Conduit Adapter

013192561
J1378-15TS32-2F-34: RNCC: 3 | RNVC: 2

4 May 1990

5975-01-312-5507
Electrical Tie Down Mounting Base

013125507
TA2: RNCC: 3 | RNVC: 2
99020412: RNCC: 5 | RNVC: 2
CTAM-C: RNCC: 5 | RNVC: 2
5262514-001: RNCC: C | RNVC: 1

17 Dec 1989

5975-01-320-2760
Electrical Conductor Bushing

013202760
5856666: RNCC: 3 | RNVC: 2

23 May 1990

5975-01-322-6361
Electrical Conduit Nipple

013226361
AN-1: RNCC: 3 | RNVC: 2

11 Jul 1990

5975-01-324-9952
Electrical Conduit Adapter

013249952
S82100-EM06-T: RNCC: 3 | RNVC: 2
RP2100-EM06-T: RNCC: 5 | RNVC: 1
RP2100-EM06-T: RNCC: 5 | RNVC: 2
S82100-EM06-T: RNCC: 5 | RNVC: 9

25 Aug 1990

5975-01-343-2256
Compression Fitting

013432256
50842: RNCC: 3 | RNVC: 2

8 Aug 1991

5975-01-343-9111
Electrical Cable Support

013439111
TM3S8-69: RNCC: 3 | RNVC: 2
TM3S8-69: RNCC: 5 | RNVC: 2
SP0451601: RNCC: 5 | RNVC: 2

20 Aug 1991

5975-01-348-4004
Electrical Conduit Bushing

013484004
1134: RNCC: 3 | RNVC: 2

8 Nov 1991

5975-01-350-6874
Electrical Box Connector

013506874
HJ1001GPK25: RNCC: 3 | RNVC: 2
HJ1001G: RNCC: 5 | RNVC: 9
13229E0627: RNCC: 7 | RNVC: 2

20 Dec 1991

5975-01-358-5125
Electrical Conduit Coupling

013585125
GR2126-EM04: RNCC: 3 | RNVC: 2
GR2126-4: RNCC: 5 | RNVC: 1
RP2000 SERIES: RNCC: D | RNVC: 9

15 May 1992

5975-01-360-7381
Connector Protection Flange

013607381
TH-2F: RNCC: 3 | RNVC: 2
TH-2F: RNCC: 3 | RNVC: 9
TH-2F: RNCC: 5 | RNVC: 9
TH-2F: RNCC: 5 | RNVC: 9
TH-2F: RNCC: 5 | RNVC: 9
TH-2F: RNCC: 5 | RNVC: 9
5975PL1285668: RNCC: 6 | RNVC: 9

30 Jun 1992

5975-01-362-8231
Electrical Conduit Wye

013628231
101003: RNCC: 3 | RNVC: 2
10250677-1: RNCC: 7 | RNVC: 2

15 Aug 1992

Load More Results