What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 104 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 104of 491

5975-01-512-7790
Flexible Metal Conduit Assembly

015127790
CA00884-4A4WD3W00422: RNCC: 3 | RNVC: 2
CA00884-4A4WD00422: RNCC: 3 | RNVC: 2
CA00884-4A4WD00422: RNCC: 5 | RNVC: 9
CA00884-4A4WD3W00422: RNCC: 5 | RNVC: 9

10 Sep 2003

5975-01-517-5237
Electrical-Electronic Equipment Chassis

015175237
1200290L1: RNCC: 3 | RNVC: 2

10 Feb 2004

5975-01-519-8736
Electrical-Electronic Equipment Chassis

015198736
519335-801: RNCC: 3 | RNVC: 2

5 May 2004

5975-01-518-2509
Electrical-Electronic Equipment Panel

015182509
675-23304-2: RNCC: 3 | RNVC: 2

5 Mar 2004

5975-01-523-2379
Extension Reel Mounting Connection Kit

015232379
K056008: RNCC: 3 | RNVC: 2

25 Aug 2004

5975-01-523-8832
Electrical Conduit Adapter

015238832
713AL100NF32132: RNCC: 3 | RNVC: 2

17 Sep 2004

5975-01-528-4881
Grounding Kit

015284881
99411399: RNCC: 3 | RNVC: 2
24KP302: RNCC: 5 | RNVC: 2
24KP302: RNCC: 5 | RNVC: 9

15 Mar 2005

5975-01-528-9269
Electrical-Electronic Equipment Panel

015289269
438-5749760-049: RNCC: 3 | RNVC: 2
5749760-049: RNCC: 5 | RNVC: 9

29 Mar 2005

5975-01-530-8530
Flexible Metal Conduit

015308530
M24758-C: RNCC: 2 | RNVC: 2
MIL-C-24758/5: RNCC: 4 | RNVC: 1
MIL-PRF-24758A: RNCC: 5 | RNVC: 1
M24758/5-06-A: RNCC: 5 | RNVC: 9
MIL-C-24758: RNCC: 5 | RNVC: 9

14 Jun 2005

5975-01-531-1131
Electrical-Electronic Equipment Chassis

015311131
TBX500BKRME-R: RNCC: 3 | RNVC: 2
TBX500BKRME: RNCC: 5 | RNVC: 9
9000703-101 ITEM # 74: RNCC: 5 | RNVC: 9
PL9000705-105 ITEM # 74: RNCC: 5 | RNVC: 9
9000705-103 ITEM # 74: RNCC: 5 | RNVC: 9
9000705-104 ITEM # 74: RNCC: 5 | RNVC: 9
9000703-100 ITEM # 74: RNCC: 5 | RNVC: 9

23 Jun 2005

5975-01-532-0779
Electrical-Electronic Equipment Chassis

015320779
7192067-000: RNCC: 3 | RNVC: 2
7192067-00: RNCC: 5 | RNVC: 9

27 Jul 2005

5975-01-533-1544
Flexible Nonmetallic Conduit

015331544
SAE-AS81914/5: RNCC: 3 | RNVC: 1
M81914/5-1101B: RNCC: 3 | RNVC: 2
M81914/5-1101-BLK: RNCC: 3 | RNVC: 9
SAE AMS-T-81914/5: RNCC: 5 | RNVC: 1
IR-97046: RNCC: 5 | RNVC: 2
M81914/5-1101-0: RNCC: 5 | RNVC: 2
SAE AMS-T-81914/5: RNCC: 5 | RNVC: 9
M81914/5-1101-BLK: RNCC: 5 | RNVC: 9
M81914/5-1101-0: RNCC: 5 | RNVC: 9

2 Sep 2005

5975-01-533-3639
Electrical Conduit Elbow

015333639
4Q-950: RNCC: 3 | RNVC: 2
4Q-950: RNCC: 3 | RNVC: 9

13 Sep 2005

5975-01-534-3366
Junction Box Cover

015343366
9080LB32: RNCC: 3 | RNVC: 2
3000169-001: RNCC: 5 | RNVC: 2
2001733 REV J ITEM 33: RNCC: 5 | RNVC: 2
2001733 REV J ITEM 33: RNCC: 5 | RNVC: 9
3000169-001: RNCC: 5 | RNVC: 9
2001733: RNCC: D | RNVC: 9

18 Oct 2005

5975-01-533-7552
Conduit Outlet

015337552
4G14049-104C: RNCC: 3 | RNVC: 2

27 Sep 2005

5975-01-534-5876
Electrical Conduit Adapter

015345876
TX40AB00-1610H: RNCC: 3 | RNVC: 2

26 Oct 2005

5975-01-534-7862
Electrical Nonmetallic Conduit Assembly

015347862
EXLK-310: RNCC: 3 | RNVC: 2
ECLK-310: RNCC: 5 | RNVC: 2
4SE00442-1-10: RNCC: 5 | RNVC: 9
EXLK-310: RNCC: 5 | RNVC: 9

2 Nov 2005

5975-01-534-7921
Blank Panel

015347921
XPN-0719-A: RNCC: 3 | RNVC: 2
PNA-7: RNCC: 3 | RNVC: 9
441140: RNCC: 5 | RNVC: 2

2 Nov 2005

5975-01-536-1791
Electrical-Electronic Equipment Chassis

015361791
531R581H01: RNCC: 3 | RNVC: 2

22 Dec 2005

5975-01-536-6888
Static Ground Reel

015366888
ML-2930-55: RNCC: 3 | RNVC: 2
ML-2930-55: RNCC: 3 | RNVC: 2

11 Jan 2006

5975-01-540-0805
Metallic Raceway

015400805
G410B: RNCC: 3 | RNVC: 2
12423632: RNCC: 5 | RNVC: 9
12423632: RNCC: 5 | RNVC: 9
14243632: RNCC: 7 | RNVC: 2

9 May 2006

5975-01-539-4904
Electrical Equipment Mounting Base

015394904
74A801682-2003: RNCC: 3 | RNVC: 2
74A800682-2009: RNCC: 5 | RNVC: 9

24 Apr 2006

5975-01-540-2982
Nonmetallic Raceway Assembly

015402982
A479980200: RNCC: 3 | RNVC: 2
A47998.0200: RNCC: 5 | RNVC: 2
CV187336: RNCC: 5 | RNVC: 2
A47998.0200: RNCC: 5 | RNVC: 2

15 May 2006

5975-01-540-7591
Metallic Raceway

015407591
G4000D: RNCC: 3 | RNVC: 1
12423630: RNCC: 7 | RNVC: 2

1 Jun 2006

5975-01-540-8726
Junction Box

015408726
CU347-G: RNCC: 3 | RNVC: 2
0212523 NOTE 7: RNCC: 5 | RNVC: 2

7 Jun 2006

5975-01-543-9011
Strain Electrical Conductor Clamp

015439011
30-302-2C08G10: RNCC: 1 | RNVC: 2
30-302-2C08G10: RNCC: 3 | RNVC: 2
30-302-2C08G10: RNCC: 3 | RNVC: 2
30-302-2C08G10: RNCC: 3 | RNVC: 2
30-302-2C08G10: RNCC: 3 | RNVC: 2

25 Sep 2006

5975-01-546-4554
Cathode Orifice Ay

015464554
8059-G503: RNCC: 3 | RNVC: 2
LL-H61-9729: RNCC: 5 | RNVC: 1
7465-10: RNCC: 5 | RNVC: 2
7465C-10: RNCC: 5 | RNVC: 2
7465-ITEM NO 10: RNCC: 5 | RNVC: 9

18 Dec 2006

5975-01-548-2314
Stuffing Tube

015482314
HJ1058BPK25: RNCC: 3 | RNVC: 2

14 Feb 2007

5975-01-462-7321
Stuffing Tube

014627321
1990.9 SIZE A TYPE 67: RNCC: 3 | RNVC: 2
9000S620274269-149: RNCC: 5 | RNVC: 2
9000S620274269: RNCC: 5 | RNVC: 2

16 Feb 1999

5975-01-464-0844
Electrical-Electronic Equipment Panel

014640844
406865-01: RNCC: 3 | RNVC: 2
406865-01: RNCC: 3 | RNVC: 2

15 Apr 1999

5975-01-464-8580
Flexible Nonmetallic Conduit

014648580
CL-516: RNCC: 3 | RNVC: 2
9325C08-3137-01: RNCC: 5 | RNVC: 2

12 May 1999

5975-01-464-8681
Flexible Metal Conduit

014648681
7127K68: RNCC: 3 | RNVC: 2
7127K68: RNCC: 5 | RNVC: 1
9325C08-3023-02: RNCC: 7 | RNVC: 1
9325C08-3023: RNCC: D | RNVC: 9

12 May 1999

5975-01-464-9123
Electrical Cable Nipple

014649123
220N3V02: RNCC: 3 | RNVC: 2
40011828: RNCC: 5 | RNVC: 2
9325C08-1409-04: RNCC: 5 | RNVC: 2
9325C08-1409: RNCC: D | RNVC: 9

13 May 1999

5975-01-464-9164
Electrical Box Connector

014649164
7119K73: RNCC: 3 | RNVC: 2
7119K73: RNCC: 5 | RNVC: 2
9325C08-3022-02: RNCC: 7 | RNVC: 2
64-0262: RNCC: C | RNVC: 1
9325C08-3022: RNCC: D | RNVC: 9

13 May 1999

5975-01-466-7336
Junction Box

014667336
37236-2051-1: RNCC: 3 | RNVC: 2
47236-1005-101 ITEM 1: RNCC: 5 | RNVC: 2

29 Jul 1999

5975-01-471-8477
Strain Electrical Conductor Clamp

014718477
30-302-2D06J04: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8492
Strain Electrical Conductor Clamp

014718492
30-302-2D17J06: RNCC: 3 | RNVC: 2
30-302-2D17J06: RNCC: 5 | RNVC: 2
30-302-2D17J06: RNCC: 5 | RNVC: 2
30-302-2D17J06: RNCC: 5 | RNVC: 2
30-302-2D17J06: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-471-8498
Strain Electrical Conductor Clamp

014718498
30-302-2D14J05: RNCC: 3 | RNVC: 2
30-302-2D14J05: RNCC: 5 | RNVC: 2
30-302-2D14J05: RNCC: 5 | RNVC: 2
30-302-2D14J05: RNCC: 5 | RNVC: 2
30-302-2D14J05: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-471-8509
Strain Electrical Conductor Clamp

014718509
30-302-2D05J14: RNCC: 3 | RNVC: 2
30-302-2D05J14: RNCC: 3 | RNVC: 2
30-302-2D05J14: RNCC: 3 | RNVC: 2
30-302-2D05J14: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8577
Strain Electrical Conductor Clamp

014718577
30-302-2D11J04: RNCC: 3 | RNVC: 2
30-302-2D11J04: RNCC: 5 | RNVC: 2
30-302-2D11J04: RNCC: 5 | RNVC: 2
30-302-2D11J04: RNCC: 5 | RNVC: 2
30-302-2D11J04: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-472-0176
Strain Electrical Conductor Clamp

014720176
30-302-2D06G12: RNCC: 3 | RNVC: 2
30-302-2D06G12: RNCC: 5 | RNVC: 2
30-302-2D06G12: RNCC: 5 | RNVC: 2
30-302-2D06G12: RNCC: 5 | RNVC: 2
30-302-2D06G12: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-472-0336
Strain Electrical Conductor Clamp

014720336
30-302-2D07G07: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0220
Strain Electrical Conductor Clamp

014720220
30-302-2D04G11: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0807
Strain Electrical Conductor Clamp

014720807
30-302-2D07G10: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-9370
Electrical Tie Down Mounting Base

014729370
CB3019A3N: RNCC: 3 | RNVC: 2
CB3019: RNCC: D | RNVC: 9

22 Mar 2000

5975-01-474-2751
Electrical Tie Down Mounting Base

014742751
HS5837AA3N: RNCC: 3 | RNVC: 2

28 Apr 2000

5975-01-478-7584
Electrical Components Tie Down Strap

014787584
96-9129: RNCC: 3 | RNVC: 2
96-9129: RNCC: 3 | RNVC: 9
31025083: RNCC: 5 | RNVC: 9

26 Sep 2000

5975-01-481-1260
Electrical Box Connector

014811260
AA50553-1-2-L-2-03-A: RNCC: 2 | RNVC: 2
AA50553: RNCC: 4 | RNVC: 1

19 Dec 2000

5975-01-483-3188
Electronic Equipment Mounting Tray

014833188
34200575-013: RNCC: 3 | RNVC: 2

23 Mar 2001

5975-01-482-0543
Electrical Wall Plate

014820543
5148-0: RNCC: 3 | RNVC: 2
62206-1: RNCC: 5 | RNVC: 1
62206-1: RNCC: 5 | RNVC: 9
WR281C: RNCC: 5 | RNVC: 9
WC2AV: RNCC: 5 | RNVC: 9
5148-0: RNCC: 5 | RNVC: 9
602206: RNCC: D | RNVC: 9

7 Feb 2001

5975-01-483-0843
Junction Box

014830843
12463101: RNCC: 3 | RNVC: 2

15 Mar 2001

5975-01-485-7723
Rigid Metal Conduit Assembly

014857723
23A02336-50: RNCC: 3 | RNVC: 2
93160179: RNCC: 5 | RNVC: 1
3260AS417: RNCC: D | RNVC: 9

6 Jun 2001

5975-01-485-7726
Rigid Metal Conduit Assembly

014857726
23A02336-56: RNCC: 3 | RNVC: 2
93160184: RNCC: 5 | RNVC: 2
3260AS424: RNCC: D | RNVC: 9

6 Jun 2001

5975-01-485-7950
Rigid Metal Conduit Assembly

014857950
3260AS373: RNCC: 1 | RNVC: 2
23A02336-11: RNCC: 3 | RNVC: 2
93160146: RNCC: 5 | RNVC: 2

7 Jun 2001

5975-01-491-3435
Stuffing Tube

014913435
22145: RNCC: 3 | RNVC: 2
22145: RNCC: 5 | RNVC: 2

18 Oct 2001

5975-01-493-6962
Electrical Mounting Offset

014936962
1631154-1: RNCC: 3 | RNVC: 2

15 Jan 2002

5975-01-494-3163
Electrical Conduit Tee

014943163
5014618: RNCC: 3 | RNVC: 2
PT9333: RNCC: 3 | RNVC: 9

7 Feb 2002

5975-01-496-5191
Electrical Cable Protector

014965191
CP2X325: RNCC: 3 | RNVC: 9
MG2300-ORG/YEL: RNCC: 5 | RNVC: 2

18 Apr 2002

5975-01-496-7924
Electrical Nonmetallic Conduit Assembly

014967924
R58HB02B34W024: RNCC: 3 | RNVC: 2
R58HB02B34W024: RNCC: 5 | RNVC: 2
R58HB02B34W024: RNCC: 5 | RNVC: 2
R58HB02B34W024: RNCC: 5 | RNVC: 9
R58HB02B34W024: RNCC: 7 | RNVC: 2

26 Apr 2002

5975-01-497-0117
Cable Strain Relief Bushing

014970117
69915K51: RNCC: 3 | RNVC: 2

6 May 2002

5975-01-497-1493
Ground Rod Section

014971493
S583DT: RNCC: 3 | RNVC: 2
99002C8008: RNCC: 7 | RNVC: 1
99002C8008-5: RNCC: 7 | RNVC: 2

10 May 2002

5975-01-497-5628
Electrical Conduit Adapter

014975628
319HS001NF0902-6: RNCC: 3 | RNVC: 2

23 May 2002

5975-01-500-0254
Flexible Nonmetallic Conduit

015000254
HCTE1500-0: RNCC: 3 | RNVC: 2

12 Aug 2002

5975-01-500-8183
Electrical Conduit Elbow

015008183
74A580703-1005: RNCC: 3 | RNVC: 2

12 Sep 2002

5975-01-495-2413
Electrical Equipment Mounting Base

014952413
12422688: RNCC: 3 | RNVC: 2
12422688: RNCC: 5 | RNVC: 9

11 Mar 2002

5975-01-503-1819
Electrical Equipment Mounting Base

015031819
071-04047-0000: RNCC: 3 | RNVC: 9
VC-401B: RNCC: 5 | RNVC: 9

6 Dec 2002

5975-01-504-5475
Electrical Equipment Mounting Base

015045475
200-85317-102: RNCC: 3 | RNVC: 2
247-1026-020: RNCC: 5 | RNVC: 1
MT6-8371-101: RNCC: 5 | RNVC: 1
247-1026: RNCC: D | RNVC: 9

31 Jan 2003

5975-01-504-6712
Electronic Equipment Mounting Tray

015046712
901-370-345-273: RNCC: 3 | RNVC: 2
901-370-345-273: RNCC: 5 | RNVC: 2

6 Feb 2003

5975-01-506-9600
Cable Hanger

015069600
9M-10: RNCC: 3 | RNVC: 2
6512E17FN86: RNCC: D | RNVC: 9

15 Apr 2003

5975-01-508-8276
Electronic Equipment Mounting Tray

015088276
212A686-1: RNCC: 3 | RNVC: 2
212A686: RNCC: D | RNVC: 9

4 Jun 2003

5975-01-509-8112
Rigid Metal Conduit Assembly

015098112
23A02881-4: RNCC: 3 | RNVC: 2

3 Jul 2003

5975-01-511-4447
Flexible Nonmetallic Conduit

015114447
120-117-40-100: RNCC: 3 | RNVC: 9
120-117-40: RNCC: 5 | RNVC: 9
120-117: RNCC: D | RNVC: 9

8 Aug 2003

5975-01-512-4825
Electrical Conduit Ferrule

015124825
4B69010-101A: RNCC: 3 | RNVC: 2

2 Sep 2003

5975-01-512-7859
Flexible Metal Conduit Assembly

015127859
CA00884-2A2WP3N00800: RNCC: 3 | RNVC: 2
CA00884-2A2WP3N00800: RNCC: 5 | RNVC: 9

10 Sep 2003

5975-01-513-3523
Tiedo Mounting Base

015133523
CB4019C3N: RNCC: 3 | RNVC: 2

24 Sep 2003

5975-01-512-7945
Flexible Metal Conduit Assembly

015127945
CA00884-2A2WH3N00283: RNCC: 3 | RNVC: 2
CA00884-2A2WH3N00282: RNCC: 5 | RNVC: 9
CA00884-2A2WH3N00283: RNCC: 5 | RNVC: 9

10 Sep 2003

5975-01-513-4557
Electrical Components Tie Down Strap

015134557
T50L-OHS: RNCC: 3 | RNVC: 2
291207C1: RNCC: 5 | RNVC: 2
291207C1: RNCC: 5 | RNVC: 9
50L-0HS: RNCC: 5 | RNVC: 9
PT08-28991: RNCC: D | RNVC: 9

25 Sep 2003

5975-01-514-3485
Electronic Equipment Mounting Tray

015143485
726937-801: RNCC: 3 | RNVC: 2
MXF-366: RNCC: 5 | RNVC: 2

23 Oct 2003

5975-01-518-2865
Electrical Nonmetallic Conduit Assembly

015182865
2046AS072-74: RNCC: 3 | RNVC: 2
23A01845-074: RNCC: 5 | RNVC: 2
740NF110NFH251I09-09-82: RNCC: 5 | RNVC: 9
23A01845-074: RNCC: 5 | RNVC: 9
740NF110NF251T09-09-82: RNCC: 5 | RNVC: 9
740NF110NFH251T09-09-82: RNCC: C | RNVC: 1
749-083-5: RNCC: D | RNVC: 9

8 Mar 2004

5975-01-519-7794
Electrical Box Connector

015197794
2335801: RNCC: 3 | RNVC: 2

30 Apr 2004

5975-01-519-8006
Electrical Components Tie Down Strap

015198006
7130K41: RNCC: 3 | RNVC: 2

30 Apr 2004

5975-01-520-5257
Interconnecting Box

015205257
380-5921: RNCC: 3 | RNVC: 2
15012543: RNCC: 5 | RNVC: 2
4KK570: RNCC: 5 | RNVC: 2
370-3282: RNCC: 5 | RNVC: 2
4KK570: RNCC: 5 | RNVC: 9
370-3282: RNCC: 5 | RNVC: 9

14 May 2004

5975-01-522-0910
Flexible Metal Conduit

015220910
LQC3/8: RNCC: 3 | RNVC: 2

19 Jul 2004

5975-01-522-5940
Rigid Metal Conduit Assembly

015225940
23A02863-31: RNCC: 3 | RNVC: 2

5 Aug 2004

5975-01-521-8030
Junction Box

015218030
250-028908-10: RNCC: 3 | RNVC: 2

6 Jul 2004

5975-01-526-2923
Stuffing Tube Plug

015262923
05098100: RNCC: 3 | RNVC: 2

14 Dec 2004

5975-01-527-8732
Electrical Equipment Mounting Base

015278732
13589470: RNCC: 3 | RNVC: 2

23 Feb 2005

5975-01-528-9506
Electrical-Electronic Equipment Panel

015289506
5749760-063: RNCC: 3 | RNVC: 2
95-1719-7: RNCC: 5 | RNVC: 2

30 Mar 2005

5975-01-529-1542
Metallic Raceway Assembly

015291542
123AB40125-11: RNCC: 3 | RNVC: 2
123AB40125-11: RNCC: 5 | RNVC: 9
123AB40125-11: RNCC: 5 | RNVC: 9

6 Apr 2005

5975-01-529-9461
Electronic Equipment Mounting Tray

015299461
9000694-1: RNCC: 1 | RNVC: 2
AH2000: RNCC: 3 | RNVC: 2
9000600-101 FIND # 27: RNCC: 5 | RNVC: 2

9 May 2005

5975-01-530-1718
Electrical Conduit Adapter

015301718
711HS078NF2128-4: RNCC: 3 | RNVC: 2
S4270FM7228S-34-4: RNCC: 3 | RNVC: 2
63A155258P93: RNCC: 7 | RNVC: 2
63A155258: RNCC: D | RNVC: 9

17 May 2005

5975-01-531-0600
Electrical Box Connector

015310600
2932: RNCC: 3 | RNVC: 2
2932: RNCC: 5 | RNVC: 9
17-1-6814-1: RNCC: 7 | RNVC: 2
17-1-6814: RNCC: D | RNVC: 9

21 Jun 2005

5975-01-534-1421
Cable Marker Sleeve

015341421
SM12 1/4 WHT: RNCC: 3 | RNVC: 2
LSF00099: RNCC: D | RNVC: 9

11 Oct 2005

5975-01-535-5467
Swing Panel Kit

015355467
A-JCDFK: RNCC: 3 | RNVC: 2

2 Dec 2005

5975-01-536-7749
Electrical Cable Nipple

015367749
BACN18H7: RNCC: 3 | RNVC: 2
SR1010038: RNCC: 5 | RNVC: 2
BACN18H7: RNCC: 5 | RNVC: 9

13 Jan 2006

5975-01-536-8328
Electronic Equipment Mounting Tray

015368328
FXOPT0040: RNCC: 3 | RNVC: 2
401-8175073 SHEET 7: RNCC: 5 | RNVC: 1
401-7583872ITEM48: RNCC: 5 | RNVC: 2
401-8175073 SHEET 9: RNCC: 5 | RNVC: 2
401-8285208 ITEM NO 17: RNCC: 5 | RNVC: 2
141-015-330-00: RNCC: 5 | RNVC: 2

18 Jan 2006

5975-01-538-1877
Junction Box

015381877
E382DE: RNCC: 3 | RNVC: 9
E382DE: RNCC: 5 | RNVC: 2
E382DE: RNCC: 5 | RNVC: 9

14 Mar 2006

5975-01-538-7942
Rigid Metal Conduit Assembly

015387942
23A02829-18: RNCC: 3 | RNVC: 2

30 Mar 2006

5975-01-540-5504
Electrical Box Connector

015405504
AA50552-00I-1-D-C: RNCC: 2 | RNVC: 2
AA50552: RNCC: 4 | RNVC: 1

23 May 2006

5975-01-541-9168
Cable Marker Sleeve

015419168
TMS-SCE-2.5K-3/16-2.0-9: RNCC: 3 | RNVC: 2
TMS-SCE-F2.5K-3/16-9: RNCC: 3 | RNVC: 9

17 Jul 2006

5975-01-543-9016
Strain Electrical Conductor Clamp

015439016
30-302-2D11G08: RNCC: 1 | RNVC: 2
30-302-2D11G08: RNCC: 3 | RNVC: 2
30-302-2D11G08: RNCC: 3 | RNVC: 2
30-302-2D11G08: RNCC: 3 | RNVC: 2
30-302-2D11G08: RNCC: 3 | RNVC: 2

25 Sep 2006

5975-01-543-8005
Electrical Components Tie Down Strap

015438005
2042281: RNCC: 3 | RNVC: 2

21 Sep 2006

5975-01-544-8830
Electrical Components Tie Down Strap

015448830
SAE-AS23190: RNCC: 3 | RNVC: 1
AS33671-2-9: RNCC: 3 | RNVC: 2
AS33671-2-9: RNCC: 3 | RNVC: 9

25 Oct 2006

5975-01-546-9219
Electronic Equipment Mounting Tray

015469219
68A870091-1005: RNCC: 3 | RNVC: 2

9 Jan 2007

5975-01-547-3092
Electrical Components Tie Down Strap

015473092
VRT11M-C: RNCC: 3 | RNVC: 2
20001600: RNCC: D | RNVC: 9

17 Jan 2007

5975-01-548-4348
Electrical Components Tie Down Strap

015484348
AA9500D3656: RNCC: 3 | RNVC: 2

8 Apr 2021

5975-01-549-2083
Electrical Wall Plate

015492083
MP-SW-BASE: RNCC: 3 | RNVC: 2

14 Mar 2007

5975-01-549-7543
Electrical Grounding Plate

015497543
10208-0009: RNCC: 3 | RNVC: 2

28 Mar 2007

5975-01-550-1232
Stuffing Tube

015501232
230322010: RNCC: 3 | RNVC: 2
21640.6: RNCC: 5 | RNVC: 2

10 Apr 2007

5975-01-499-5912
Electrical-Electronic Equipment Chassis

014995912
802025205104-1: RNCC: 3 | RNVC: 9
802025205104-1: RNCC: 7 | RNVC: 2
802025205104: RNCC: D | RNVC: 9

30 Jul 2002

5975-01-499-7190
Electrical Equipment Foot

014997190
1421T7: RNCC: 3 | RNVC: 2
802027205217-1: RNCC: 5 | RNVC: 2
1421T7: RNCC: 5 | RNVC: 9
802027205217: RNCC: D | RNVC: 9

1 Aug 2002

5975-01-508-4746
Electrical Components Tie Down Strap

015084746
AL-05-40-9-C: RNCC: 3 | RNVC: 2
7130K13: RNCC: 5 | RNVC: 2

21 May 2003

5975-01-509-8098
Rigid Metal Conduit Assembly

015098098
23A02881-3: RNCC: 3 | RNVC: 2

3 Jul 2003

5975-01-461-3282
Box Retainer

014613282
634-5775-001: RNCC: 3 | RNVC: 2

9 Dec 1998

5975-01-463-3375
Guide Rail

014633375
9080MH379: RNCC: 3 | RNVC: 2

17 Mar 1999

5975-01-464-8194
Electrical Box Connector

014648194
16205B: RNCC: 3 | RNVC: 2
7119K72: RNCC: 3 | RNVC: 9
0164942: RNCC: 5 | RNVC: 2
LMII: RNCC: 5 | RNVC: 2
7119K72: RNCC: 5 | RNVC: 9
5975PL0932141: RNCC: 6 | RNVC: 9
9325C08-3022-01: RNCC: 7 | RNVC: 2
9325C08-3022: RNCC: D | RNVC: 9

11 May 1999

5975-01-465-0385
Electrical Cable Nipple

014650385
224N3V14: RNCC: 3 | RNVC: 2
9325C08-1409-08: RNCC: 7 | RNVC: 2
9325C08-1409: RNCC: D | RNVC: 9

19 May 1999

5975-01-469-3756
Electrical Cable Protector

014693756
50-107-B08T: RNCC: 3 | RNVC: 2
50-107-B08T: RNCC: 5 | RNVC: 2
50-093-A08T: RNCC: 5 | RNVC: 9

15 Nov 1999

5975-01-469-9320
Electrical Conduit Locknut

014699320
1126646: RNCC: 3 | RNVC: 2
112-6646: RNCC: 5 | RNVC: 2

1 Dec 1999

5975-01-470-2520
Electrical Conduit Adapter

014702520
6430-12-041-15: RNCC: 3 | RNVC: 2

13 Dec 1999

5975-01-471-8479
Strain Electrical Conductor Clamp

014718479
30-302-1D09J03: RNCC: 3 | RNVC: 2
30-302-1D09J03: RNCC: 5 | RNVC: 2
30-302-1D09J03: RNCC: 5 | RNVC: 2
30-302-1D09J03: RNCC: 5 | RNVC: 2
30-302-1D09J03: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-471-8544
Strain Electrical Conductor Clamp

014718544
30-302-3D12G18: RNCC: 3 | RNVC: 2
30-302-3D12G18: RNCC: 3 | RNVC: 2
30-302-3D12G18: RNCC: 3 | RNVC: 2
30-302-3D12G18: RNCC: 3 | RNVC: 2
30-302-3D12G18: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8600
Strain Electrical Conductor Clamp

014718600
30-302-2D17J05: RNCC: 3 | RNVC: 2
30-302-2D17J05: RNCC: 3 | RNVC: 2
30-302-2D17J05: RNCC: 3 | RNVC: 2
30-302-2D17J05: RNCC: 3 | RNVC: 2
30-302-2D17J05: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8613
Electrical Cable Nipple

014718613
1672-0073: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8670
Strain Electrical Conductor Clamp

014718670
30-302-3D19G16: RNCC: 3 | RNVC: 2
30-302-3D19G16: RNCC: 3 | RNVC: 2
30-302-3D19G16: RNCC: 3 | RNVC: 2
30-302-3D19G16: RNCC: 3 | RNVC: 2
30-302-3D19G16: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-472-0250
Strain Electrical Conductor Clamp

014720250
30-302-2D06J19: RNCC: 3 | RNVC: 2
30-302-2D06J19: RNCC: 5 | RNVC: 2
30-302-2D06J19: RNCC: 5 | RNVC: 2
30-302-2D06J19: RNCC: 5 | RNVC: 2
30-302-2D06J19: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-472-0740
Strain Electrical Conductor Clamp

014720740
30-302-2D17G16: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-1129
Strain Electrical Conductor Clamp

014721129
30-302-2D05G14: RNCC: 1 | RNVC: 2
30-302-2D05G14: RNCC: 3 | RNVC: 2
30-302-2D05G14: RNCC: 3 | RNVC: 2
30-302-2D05G14: RNCC: 3 | RNVC: 2
30-302-2D05G14: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-474-7840
Electrical Equipment Mounting Base

014747840
12987869: RNCC: 3 | RNVC: 2

12 May 2000

5975-01-472-7401
Electrical Conduit Coupling

014727401
16W1195-15: RNCC: 3 | RNVC: 2
16W1195: RNCC: D | RNVC: 9

15 Mar 2000

5975-01-476-8612
Electrical-Electronic Equipment Panel

014768612
733-10074-1: RNCC: 3 | RNVC: 2
733-10074: RNCC: D | RNVC: 9

25 Jul 2000

5975-01-479-0207
Flexible Nonmetallic Conduit

014790207
48-25360-019: RNCC: 3 | RNVC: 2
48-25360-019: RNCC: 5 | RNVC: 2

6 Oct 2000

5975-01-479-2808
Blank Panel

014792808
9333103223: RNCC: 3 | RNVC: 2

17 Oct 2000

5975-01-479-0509
Stuffing Tube

014790509
CG-1250: RNCC: 3 | RNVC: 2
CG-1250: RNCC: 3 | RNVC: 9
A37710-004: RNCC: 5 | RNVC: 2

10 Oct 2000

5975-01-480-1325
Electrical Equipment Mounting Base

014801325
987-0088-001: RNCC: 3 | RNVC: 2

8 Nov 2000

5975-01-480-5396
Electrical Box Connector

014805396
2678: RNCC: 3 | RNVC: 2

27 Nov 2000

5975-01-480-7899
Raceway Cover

014807899
12421507-001: RNCC: 3 | RNVC: 2
12421507-001: RNCC: 5 | RNVC: 2
12421507-001: RNCC: 5 | RNVC: 2
12421507: RNCC: D | RNVC: 9

6 Dec 2000

5975-01-481-2263
Electronic Equipment Mounting Tray

014812263
70157-106: RNCC: 3 | RNVC: 2
MT6-06SL-102B-SL: RNCC: 3 | RNVC: 2
6358-101: RNCC: 3 | RNVC: 2
247-1023-010: RNCC: 7 | RNVC: 1
247-1023: RNCC: D | RNVC: 9

22 Dec 2000

5975-01-485-7712
Rigid Metal Conduit Assembly

014857712
23A02336-88: RNCC: 3 | RNVC: 2
93160250: RNCC: 5 | RNVC: 9
3260AS557: RNCC: D | RNVC: 9

6 Jun 2001

5975-01-485-8080
Rigid Metal Conduit Assembly

014858080
23A02336-32: RNCC: 3 | RNVC: 2
93160165: RNCC: 5 | RNVC: 1
3260AS397: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-486-7048
Ground Rod

014867048
DS-68: RNCC: 3 | RNVC: 2

12 Jul 2001

5975-01-487-8582
Electrical Components Tie Down Strap

014878582
6-850-100002: RNCC: 3 | RNVC: 2

21 Aug 2001

5975-01-487-8719
Metallic Raceway Assembly

014878719
12250238: RNCC: 3 | RNVC: 2

22 Aug 2001

5975-01-491-3061
Stuffing Tube Adapter

014913061
22065-401: RNCC: 3 | RNVC: 2
22065: RNCC: D | RNVC: 9

17 Oct 2001

5975-01-491-3060
Stuffing Tube Adapter

014913060
22065-405: RNCC: 3 | RNVC: 2
22065: RNCC: D | RNVC: 9

17 Oct 2001

5975-01-492-3982
Electrical Equipment Mounting Base

014923982
1049999G-1: RNCC: 3 | RNVC: 2
MT-7221/APX: RNCC: 5 | RNVC: 2

27 Nov 2001

5975-01-494-3147
Electrical Box Connector

014943147
2921AL: RNCC: 3 | RNVC: 2

7 Feb 2002

5975-01-495-7073
Electrical Conduit Wye

014957073
710-106NFA16B12C12: RNCC: 3 | RNVC: 2
63A154731P4: RNCC: 5 | RNVC: 2

22 Mar 2002

5975-01-496-4937
Electrical-Electronic Equipment Panel

014964937
196572-A00: RNCC: 3 | RNVC: 2
196572A: RNCC: 5 | RNVC: 9

17 Apr 2002

5975-01-495-7914
Special Harness

014957914
109871N: RNCC: 3 | RNVC: 2
109871: RNCC: 3 | RNVC: 9

25 Mar 2002

5975-01-496-9673
Cable Marker Sleeve

014969673
HT-SCE-3/4-2.0-9: RNCC: 3 | RNVC: 2

3 May 2002

5975-01-496-9671
Cable Marker Sleeve

014969671
HT-SCE-1/2-2.0-9: RNCC: 3 | RNVC: 2

3 May 2002

5975-01-501-4255
Cable Tie Mount

015014255
CB4019G3N750: RNCC: 3 | RNVC: 2
193527073: RNCC: 5 | RNVC: 2

1 Oct 2002

5975-01-502-3123
Guide Rail

015023123
DCR-1A-12: RNCC: 3 | RNVC: 2
GR803B12: RNCC: 7 | RNVC: 2

31 Oct 2002

5975-01-503-4899
Conduit

015034899
7132751: RNCC: 3 | RNVC: 2
7132751: RNCC: 5 | RNVC: 9

19 Dec 2002

5975-01-503-7178
Electrical Tie Down Mounting Base

015037178
8584018: RNCC: 3 | RNVC: 2
8584018: RNCC: 5 | RNVC: 9

6 Jan 2003

5975-01-504-3958
Electrical-Electronic Equipment Chassis

015043958
816-3462-001: RNCC: 3 | RNVC: 2
816-3462: RNCC: D | RNVC: 9

28 Jan 2003

5975-01-506-0402
Electronic Equipment Mounting Tray

015060402
12005-1920-01: RNCC: 3 | RNVC: 2

21 Mar 2003

5975-01-506-4112
Flexible Nonmetallic Conduit

015064112
2112-4205: RNCC: 3 | RNVC: 2

28 Mar 2003

5975-01-506-4121
Flexible Metal Conduit

015064121
82941: RNCC: 3 | RNVC: 2

28 Mar 2003

5975-01-506-7100
Cable Hanger

015067100
RTD6300: RNCC: 3 | RNVC: 2

8 Apr 2003

5975-01-505-3442
Electrical Conduit Adapter

015053442
710HS002NF1912: RNCC: 3 | RNVC: 2

4 Mar 2003

NSN 5975-01-506-9170 015069170 HANGER,CABLE

5975-01-506-9170
Cable Hanger

015069170
SAMTAN0150: RNCC: 3 | RNVC: 2
6512E17FN79: RNCC: D | RNVC: 9

14 Apr 2003

5975-01-507-7960
Flexible Nonmetallic Conduit

015077960
2112-4206: RNCC: 3 | RNVC: 2

6 May 2003

5975-01-504-5751
Electrical Grounding Plate

015045751
100K591G01: RNCC: 3 | RNVC: 2
100K591: RNCC: D | RNVC: 9

3 Feb 2003

5975-01-509-9832
Electrical Components Tie Down Strap

015099832
AL-14-50-9-C: RNCC: 3 | RNVC: 2
7130K16: RNCC: 5 | RNVC: 2

10 Jul 2003

5975-01-511-7421
Electrical Cable Protector

015117421
CP1X125-GP-DO-B: RNCC: 3 | RNVC: 9

14 Aug 2003

5975-01-512-7939
Flexible Metal Conduit Assembly

015127939
CA00884-2A2WF3N00401: RNCC: 3 | RNVC: 2
CA00884-2A2WF3N00401: RNCC: 5 | RNVC: 9

10 Sep 2003

5975-01-513-3747
Tiedo Mounting Base

015133747
CB4019C3N750: RNCC: 3 | RNVC: 2

24 Sep 2003

5975-01-513-4103
11.5X.185X Tie Wire

015134103
4662065-027: RNCC: 3 | RNVC: 2
4662065-027: RNCC: 3 | RNVC: 9
4662065-027: RNCC: 5 | RNVC: 2

24 Sep 2003

5975-01-514-3489
Electronic Equipment Mounting Tray

015143489
902663-802: RNCC: 3 | RNVC: 2
902663-801: RNCC: 5 | RNVC: 9
MXF-332: RNCC: 5 | RNVC: 9

23 Oct 2003

5975-01-515-3606
Electrical Conduit Adapter

015153606
S3844-2832-34G: RNCC: 3 | RNVC: 2

21 Nov 2003

5975-01-516-7373
Electrical Equipment Mounting Base

015167373
RF-5870-VM001: RNCC: 3 | RNVC: 2
RF-5870-VM001: RNCC: 5 | RNVC: 2
RF-5870-VM001: RNCC: 5 | RNVC: 9
5975PL1623390: RNCC: 6 | RNVC: 9

16 Jan 2004

5975-01-518-2046
Interconnecting Box

015182046
97-1814GR2: RNCC: 3 | RNVC: 2
97-1808 ITEM 47: RNCC: 5 | RNVC: 2

4 Mar 2004

5975-01-516-5028
Electrical Equipment Mounting Base

015165028
D0011720-1001: RNCC: 3 | RNVC: 2

8 Jan 2004

5975-01-519-6956
Electrical Equipment Mounting Base

015196956
60-190-01: RNCC: 3 | RNVC: 2
60-190-01: RNCC: 3 | RNVC: 9
60-190-01: RNCC: 5 | RNVC: 2
9000702-100 ITEM # 48: RNCC: 5 | RNVC: 2

28 Apr 2004

5975-01-520-4814
Electrical-Electronic Equipment Panel

015204814
406-704-022-121: RNCC: 3 | RNVC: 2

13 May 2004

5975-01-522-0822
Electrical Components Tie Down Strap

015220822
3423005: RNCC: 3 | RNVC: 2
3423005: RNCC: 3 | RNVC: 9
PLB4S-M0: RNCC: 5 | RNVC: 2
T50LDH0M4: RNCC: 5 | RNVC: 2

18 Jul 2004

5975-01-527-7367
Cable Hanger

015277367
101-107-126: RNCC: 3 | RNVC: 2

15 Feb 2005

5975-01-528-9477
Electrical-Electronic Equipment Panel

015289477
5749760-065: RNCC: 3 | RNVC: 2

30 Mar 2005

5975-01-528-9494
Electrical-Electronic Equipment Panel

015289494
5749760-057: RNCC: 3 | RNVC: 2

30 Mar 2005

5975-01-529-3903
Interconnecting Box

015293903
11445-101: RNCC: 3 | RNVC: 2
11445-101: RNCC: 3 | RNVC: 9

14 Apr 2005

5975-01-529-6330
Electrical Box Connector

015296330
6V9162: RNCC: 3 | RNVC: 2

25 Apr 2005

5975-01-530-6004
Junction Box

015306004
4B61009-101B: RNCC: 3 | RNVC: 2

6 Jun 2005

5975-01-532-2970
Strain Electrical Conductor Clamp

015322970
30-302-2D09G20: RNCC: 3 | RNVC: 2

4 Aug 2005

5975-01-532-3380
Electrical-Electronic Equipment Panel

015323380
250-00027CK-P1: RNCC: 3 | RNVC: 2
250-00027CK-CP1: RNCC: 5 | RNVC: 9

4 Aug 2005

5975-01-532-4930
Electrical-Electronic Equipment Chassis

015324930
B504: RNCC: 3 | RNVC: 2
B504: RNCC: 3 | RNVC: 2
7373970-00: RNCC: 5 | RNVC: 2

10 Aug 2005

5975-01-534-1681
Electrical Conduit Adapter

015341681
TX-40-AB00-2418-H: RNCC: 3 | RNVC: 2

11 Oct 2005

5975-01-536-4546
Flexible Metal Conduit Assembly

015364546
23A02863-49: RNCC: 3 | RNVC: 2

5 Jan 2006

5975-01-539-4122
Junction Box

015394122
7390258 FIND R02: RNCC: 3 | RNVC: 2
JBBS-57-E811: RNCC: 3 | RNVC: 2
JBBS-57-E811: RNCC: 5 | RNVC: 2

20 Apr 2006

5975-01-540-8091
Raceway Cover

015408091
12423636-003: RNCC: 3 | RNVC: 1
G3000GE: RNCC: 3 | RNVC: 2
12423636-003: RNCC: 7 | RNVC: 2

5 Jun 2006

5975-01-540-8124
Raceway Cover

015408124
G3000CE: RNCC: 3 | RNVC: 1
12423636-007: RNCC: 5 | RNVC: 2
12423636-007: RNCC: 5 | RNVC: 2
12423636-007: RNCC: 7 | RNVC: 2

5 Jun 2006

5975-01-540-8791
Flexible Nonmetallic Conduit

015408791
3278978: RNCC: 3 | RNVC: 2
3278978: RNCC: 3 | RNVC: 9

7 Jun 2006

5975-01-541-9157
Cable Marker Sleeve

015419157
TMS-SCE-1K-3/4-2.0-9: RNCC: 3 | RNVC: 2
TMS-SCE-F1K-3/4-9: RNCC: 5 | RNVC: 9
TMS-SCE-1K-3/4-2.0.9.: RNCC: 5 | RNVC: 9

17 Jul 2006

5975-01-528-2999
Flexible Nonmetallic Conduit

015282999
717701065-004: RNCC: 3 | RNVC: 2
MAULFLEX-615-SM-288IN: RNCC: 5 | RNVC: 2

9 Mar 2005

5975-01-544-0263
Junction Box Cover

015440263
4B60041-101A: RNCC: 3 | RNVC: 2

28 Sep 2006

5975-01-544-5794
Black End Cap

015445794
PLAENDCAP2020: RNCC: 3 | RNVC: 2

17 Oct 2006

5975-01-545-2986
Electrical Equipment Mounting Base

015452986
A12P10: RNCC: 3 | RNVC: 2
PB410: RNCC: 5 | RNVC: 9
PB140: RNCC: 5 | RNVC: 9

8 Nov 2006

5975-01-545-2614
Cable Strain Relief Bushing

015452614
7807K69: RNCC: 3 | RNVC: 9
CD16N3-BK: RNCC: 5 | RNVC: 2
7807K39: RNCC: 5 | RNVC: 2

7 Nov 2006

5975-01-545-4931
Strain Electrical Conductor Clamp

015454931
30-302-2D11J09: RNCC: 1 | RNVC: 2
30-302-2D11J09: RNCC: 3 | RNVC: 2
30-302-2D11J09: RNCC: 3 | RNVC: 2
30-302-2D11J09: RNCC: 3 | RNVC: 2
30-302-2D11J09: RNCC: 3 | RNVC: 2

15 Nov 2006

5975-01-545-5453
Electrical Components Tie Down Strap

015455453
7130K32: RNCC: 3 | RNVC: 2
7130K32: RNCC: 5 | RNVC: 2

16 Nov 2006

5975-01-547-3090
Electrical Components Tie Down Strap

015473090
VRT101M-C: RNCC: 3 | RNVC: 9
20001600: RNCC: D | RNVC: 9

17 Jan 2007

5975-01-549-2097
Electrical Wall Plate

015492097
MP-SWITCH: RNCC: 3 | RNVC: 2

14 Mar 2007

5975-01-549-7690
Electrical Cable Protector

015497690
104A0439: RNCC: 3 | RNVC: 2

29 Mar 2007

5975-01-549-7716
Electrical Equipment Mounting Base

015497716
104A0354: RNCC: 3 | RNVC: 2

29 Mar 2007

5975-01-550-1222
Stuffing Tube

015501222
224281406: RNCC: 3 | RNVC: 2
21636.6: RNCC: 5 | RNVC: 9

10 Apr 2007

5975-01-550-4509
Cable Hanger

015504509
7565K49: RNCC: 3 | RNVC: 2
7565K49: RNCC: 5 | RNVC: 2

19 Apr 2007

5975-01-467-9255
Electrical Cable Nipple

014679255
95-8097: RNCC: 3 | RNVC: 2

21 Sep 1999

5975-01-467-9625
Electrical Components Tie Down Strap

014679625
PLT2IC76: RNCC: 3 | RNVC: 2
PLT2I-C76: RNCC: 5 | RNVC: 2
PLT2I-C76: RNCC: 5 | RNVC: 9
12506884: RNCC: D | RNVC: 9

22 Sep 1999

5975-01-465-5957
Electrical Box Connector

014655957
4972NM: RNCC: 3 | RNVC: 2

15 Jun 1999

5975-01-471-1138
Electrical Equipment Mounting Base

014711138
RM3000: RNCC: 3 | RNVC: 2
91796312: RNCC: 5 | RNVC: 2
RM3000: RNCC: 5 | RNVC: 2

24 Jan 2000

5975-01-471-0198
Electrical Cable Nipple

014710198
12132248: RNCC: 3 | RNVC: 2
12132248: RNCC: 5 | RNVC: 2

20 Jan 2000

5975-01-471-8465
Strain Electrical Conductor Clamp

014718465
30-302-1D11J03: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8462
Strain Electrical Conductor Clamp

014718462
30-302-1D03J11: RNCC: 3 | RNVC: 2
30-302-1D03J11: RNCC: 5 | RNVC: 2
30-302-1D03J11: RNCC: 5 | RNVC: 2
30-302-1D03J11: RNCC: 5 | RNVC: 2
30-302-1D03J11: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-471-8487
Strain Electrical Conductor Clamp

014718487
30-302-2D04J06: RNCC: 1 | RNVC: 2
30-302-2D04J06: RNCC: 3 | RNVC: 2
30-302-2D04J06: RNCC: 3 | RNVC: 2
30-302-2D04J06: RNCC: 3 | RNVC: 2
30-302-2D04J06: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8641
Strain Electrical Conductor Clamp

014718641
30-302-3D13G11: RNCC: 3 | RNVC: 2
30-302-3D13G11: RNCC: 5 | RNVC: 2
30-302-3D13G11: RNCC: 5 | RNVC: 2
30-302-3D13G11: RNCC: 5 | RNVC: 2
30-302-3D13G11: RNCC: 5 | RNVC: 2
BACC10KP3D1311N: RNCC: 5 | RNVC: 9

17 Feb 2000

5975-01-471-8715
Strain Electrical Conductor Clamp

014718715
30-302-2D16J15: RNCC: 3 | RNVC: 2
30-302-2D16J15: RNCC: 5 | RNVC: 2
30-302-2D16J15: RNCC: 5 | RNVC: 2
30-302-2D16J15: RNCC: 5 | RNVC: 2
30-302-2D16J15: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-472-0168
Strain Electrical Conductor Clamp

014720168
30-302-1D03G14: RNCC: 1 | RNVC: 2
30-302-1D03G14: RNCC: 3 | RNVC: 2
30-302-1D03G14: RNCC: 3 | RNVC: 2
30-302-1D03G14: RNCC: 3 | RNVC: 2
30-302-1D03G14: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0302
Strain Electrical Conductor Clamp

014720302
30-302-2D09G16: RNCC: 3 | RNVC: 2
30-302-2D09G16: RNCC: 3 | RNVC: 2
30-302-2D09G16: RNCC: 3 | RNVC: 2
30-302-2D09G16: RNCC: 3 | RNVC: 2
30-302-2D09G16: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0342
Strain Electrical Conductor Clamp

014720342
30-302-2D14G04: RNCC: 3 | RNVC: 2
30-302-2D14G04: RNCC: 5 | RNVC: 2
30-302-2D14G04: RNCC: 5 | RNVC: 2
30-302-2D14G04: RNCC: 5 | RNVC: 2
30-302-2D14G04: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-472-0445
Strain Electrical Conductor Clamp

014720445
30-302-1C03J07: RNCC: 3 | RNVC: 2
30-302-1C03J07: RNCC: 5 | RNVC: 2
30-302-1C03J07: RNCC: 5 | RNVC: 2
30-302-1C03J07: RNCC: 5 | RNVC: 2
30-302-1C03J07: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-472-0617
Attachme Cable Assy

014720617
BACC13Y3A65: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0779
Strain Electrical Conductor Clamp

014720779
30-302-1D03G07: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0801
Strain Electrical Conductor Clamp

014720801
30-302-2D06G19: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-6454
Electronic Junction Rack

014726454
CTJ-3B-07: RNCC: 3 | RNVC: 2
11467243-4: RNCC: 5 | RNVC: 2
11467243: RNCC: D | RNVC: 9

10 Mar 2000

5975-01-472-8763
Electronic Equipment Mounting Tray

014728763
12470817: RNCC: 3 | RNVC: 2

21 Mar 2000

5975-01-473-7842
Electronic Equipment Mounting Tray

014737842
0002795: RNCC: 3 | RNVC: 2
0002795: RNCC: 5 | RNVC: 9
0002795: RNCC: 5 | RNVC: 9
AT215476: RNCC: 5 | RNVC: 9

17 Apr 2000

5975-01-474-0577
Electronic Equipment Mounting Tray

014740577
12465781: RNCC: 3 | RNVC: 2

21 Apr 2000

5975-01-473-8317
Electrical-Electronic Equipment Panel

014738317
HM022-142-11: RNCC: 3 | RNVC: 2

18 Apr 2000

5975-01-475-4903
Electrical Box Connector

014754903
AA50553-I-2-L-2-01-A: RNCC: 2 | RNVC: 2
AA50553: RNCC: 4 | RNVC: 1

6 Jun 2000

5975-01-475-6581
Electrical Box Connector

014756581
712AS263A1606-4A: RNCC: 3 | RNVC: 2
712-263: RNCC: D | RNVC: 9

8 Jun 2000

5975-01-481-4994
Electrical Tie Down Mounting Base

014814994
10029: RNCC: 3 | RNVC: 2

10 Jan 2001

5975-01-481-2424
Electrical Components Tie Down Strap

014812424
863-000213: RNCC: 3 | RNVC: 2
70215K57: RNCC: 5 | RNVC: 2

26 Dec 2000

5975-01-483-5861
Electrical Box Connector

014835861
P0614-2689-1 (2274): RNCC: 3 | RNVC: 2
5-15-20115: RNCC: 5 | RNVC: 9

3 Apr 2001

5975-01-485-7937
Rigid Metal Conduit Assembly

014857937
23A02336-28: RNCC: 3 | RNVC: 2
93160161: RNCC: 5 | RNVC: 1
3260AS393: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-486-6455
Stuffing Tube Adapter

014866455
9975: RNCC: 3 | RNVC: 1
9975: RNCC: 3 | RNVC: 2
9975: RNCC: 3 | RNVC: 9
1006149 PC 28: RNCC: 5 | RNVC: 1
1006149 PC 28: RNCC: 5 | RNVC: 9

10 Jul 2001

5975-01-487-8474
Metallic Raceway Assembly

014878474
12250216: RNCC: 3 | RNVC: 2

21 Aug 2001

5975-01-487-8724
Metallic Raceway Assembly

014878724
12250241: RNCC: 3 | RNVC: 2

22 Aug 2001

5975-01-487-8472
Metallic Raceway Assembly

014878472
12250240: RNCC: 3 | RNVC: 2

21 Aug 2001

5975-01-493-2769
Mounting Strap

014932769
17-1-5533-1: RNCC: 3 | RNVC: 2
17-1-5533-1: RNCC: 5 | RNVC: 9
17-1-5533-1: RNCC: 5 | RNVC: 9
17-1-5533-1: RNCC: C | RNVC: 1

21 Dec 2001

5975-01-492-4800
Electrical Box Connector

014924800
K15K0021-117: RNCC: 3 | RNVC: 2
713FB3000B2221-81: RNCC: 5 | RNVC: 2
3AF307XX2321DA: RNCC: 5 | RNVC: 2
151480-2321: RNCC: 5 | RNVC: 2
K15K0021: RNCC: D | RNVC: 9

29 Nov 2001

5975-01-496-5496
Electrical Cable Protector

014965496
CPEC3X225: RNCC: 3 | RNVC: 9

19 Apr 2002

5975-01-496-5490
Electrical Cable Protector

014965490
CPEC4X125: RNCC: 3 | RNVC: 9

19 Apr 2002

5975-01-496-8856
Electrical Conduit Adapter

014968856
713HL100NF19128: RNCC: 3 | RNVC: 2
63A154730P1: RNCC: 5 | RNVC: 2
63A154730: RNCC: D | RNVC: 9

30 Apr 2002

5975-01-497-9061
Flexible Nonmetallic Conduit

014979061
SAE-AS81914/6: RNCC: 3 | RNVC: 1
M81914/6-1004: RNCC: 3 | RNVC: 2
MIL-T-81914: RNCC: 5 | RNVC: 9
M81914/6-1004: RNCC: 5 | RNVC: 9

7 Jun 2002

5975-01-500-7272
Flexible Nonmetallic Conduit

015007272
13230E6820-1: RNCC: 3 | RNVC: 2
13156: RNCC: 5 | RNVC: 2
13230E6820: RNCC: D | RNVC: 9

9 Sep 2002

5975-01-500-9520
Electrical Conduit Elbow

015009520
717-163-1: RNCC: 3 | RNVC: 2
8-371-01: RNCC: 5 | RNVC: 9
717-163-1: RNCC: 5 | RNVC: 9

18 Sep 2002

5975-01-501-6550
Electronic Equipment Mounting Tray

015016550
2000350-1: RNCC: 3 | RNVC: 9
2000350-1: RNCC: 5 | RNVC: 2
2000350-1: RNCC: 5 | RNVC: 9

9 Oct 2002

5975-01-502-5531
Electrical Conduit Adapter

015025531
SE23FM6504-34: RNCC: 3 | RNVC: 2
SE23: RNCC: D | RNVC: 9

12 Nov 2002

5975-01-502-6087
Electrical Conductor Bushing

015026087
74B878001: RNCC: 1 | RNVC: 2
CT0905-06C: RNCC: 3 | RNVC: 2
74B878001-151: RNCC: 5 | RNVC: 2
CT0904-151: RNCC: 5 | RNVC: 9
74B878001-151: RNCC: 5 | RNVC: 9

14 Nov 2002

5975-01-506-9166
Cable Hanger

015069166
SAMTAN0350: RNCC: 3 | RNVC: 2
6512E17FN81: RNCC: D | RNVC: 9

14 Apr 2003

5975-01-506-4091
Electrical Equipment Cabinet

015064091
2112-3037: RNCC: 3 | RNVC: 9
2112-3037: RNCC: 5 | RNVC: 2
2112-3037: RNCC: C | RNVC: 1

28 Mar 2003

5975-01-506-9604
Cable Hanger

015069604
9M-15: RNCC: 3 | RNVC: 2
6512E17FN84: RNCC: D | RNVC: 9

15 Apr 2003

5975-01-507-8111
Electrical Components Tie Down Strap

015078111
35333830: RNCC: 3 | RNVC: 2

6 May 2003

5975-01-511-0701
Electrical Components Tie Down Strap

015110701
RT150REP0X2: RNCC: 3 | RNVC: 2
7134K5: RNCC: 5 | RNVC: 2
7134K65: RNCC: 5 | RNVC: 9
115-01805: RNCC: 5 | RNVC: 9

1 Aug 2003

5975-01-512-7524
Flexible Metal Conduit Assembly

015127524
CA00884-2B2WF3N00280: RNCC: 3 | RNVC: 2
CA00884-2B2WF3N00280: RNCC: 5 | RNVC: 9

9 Sep 2003

5975-01-512-7794
Flexible Metal Conduit Assembly

015127794
CA00884-4D3WG4W00450: RNCC: 3 | RNVC: 2
CA00884-4D3WG4W00450: RNCC: 5 | RNVC: 9

10 Sep 2003

5975-01-514-1600
Electrical Grounding Plate

015141600
10181-9804: RNCC: 3 | RNVC: 9
10181-9804: RNCC: C | RNVC: 1

17 Oct 2003

5975-01-515-3619
Electrical Conduit Adapter

015153619
S3844-2224-34G: RNCC: 3 | RNVC: 2

21 Nov 2003

5975-01-515-8365
Electrical Equipment Mounting Base

015158365
RF-5071VSM-03: RNCC: 3 | RNVC: 2

10 Dec 2003

5975-01-516-9221
Flexible Nonmetallic Conduit

015169221
7HB968: RNCC: 3 | RNVC: 2
7HB968: RNCC: 3 | RNVC: 9
9955.0114: RNCC: 5 | RNVC: 2

24 Jan 2004

5975-01-507-8644
Tie Plate

015078644
22180806: RNCC: 3 | RNVC: 2

7 May 2003

5975-01-517-6059
Interconnecting Box

015176059
175371-5: RNCC: 3 | RNVC: 2
175371: RNCC: D | RNVC: 9

13 Feb 2004

5975-01-517-9077
Electrical Components Tie Down Strap

015179077
PLT21-C76: RNCC: 3 | RNVC: 2

24 Feb 2004

5975-01-518-8341
Electrical Components Tie Down Strap

015188341
PLT2I-M0: RNCC: 3 | RNVC: 2

24 Mar 2004

5975-01-518-9783
Electrical Cable Nipple

015189783
52-626: RNCC: 3 | RNVC: 9
52626: RNCC: 5 | RNVC: 2

31 Mar 2004

5975-01-519-3571
Flexible Metal Conduit

015193571
750-031-32: RNCC: 3 | RNVC: 2

15 Apr 2004

5975-01-524-4446
Electrical Wall Plate

015244446
PASSCA18-G: RNCC: 3 | RNVC: 2
CA18-G: RNCC: 3 | RNVC: 9

4 Oct 2004

5975-01-525-2371
Strain Relief

015252371
370FS001B0804A3: RNCC: 3 | RNVC: 2

1 Nov 2004

5975-01-526-5882
Conduit Outlet

015265882
4KK824: RNCC: 3 | RNVC: 2
4KK824: RNCC: 3 | RNVC: 9
986-5519: RNCC: 5 | RNVC: 2

23 Dec 2004

5975-01-526-8980
Electrical Conduit Tee

015268980
710-108NFA24B24C24: RNCC: 3 | RNVC: 2

12 Jan 2005

5975-01-528-6305
Junction Box

015286305
7549725-A9: RNCC: 3 | RNVC: 2
G733-3001-A9: RNCC: 5 | RNVC: 1
7385420-075: RNCC: 5 | RNVC: 9
G853-1012-075: RNCC: 5 | RNVC: 9

21 Mar 2005

5975-01-528-7770
Electrical-Electronic Equipment Panel

015287770
5749760-055: RNCC: 3 | RNVC: 2
5749760-055: RNCC: 5 | RNVC: 2
438-5749760: RNCC: D | RNVC: 9

24 Mar 2005

5975-01-528-8520
Electrical-Electronic Equipment Panel

015288520
5749063-025: RNCC: 3 | RNVC: 2
438-5749063: RNCC: D | RNVC: 9

28 Mar 2005

5975-01-529-1146
Electrical Components Tie Down Strap

015291146
90-001-2: RNCC: 3 | RNVC: 2
GS874AE1: RNCC: 7 | RNVC: 2

5 Apr 2005

5975-01-529-1565
Electrical Box Connector

015291565
12491618: RNCC: 3 | RNVC: 2

6 Apr 2005

5975-01-530-4656
Electrical Nonmetallic Conduit Assembly

015304656
R58HB16G42W006A: RNCC: 3 | RNVC: 2
R58HB16G42W006A: RNCC: 5 | RNVC: 2
R58HB16G42W006A: RNCC: 5 | RNVC: 9

31 May 2005

5975-01-530-8539
Electrical Box Connector

015308539
M24758/5-12-A: RNCC: 2 | RNVC: 2
MIL-C-24758: RNCC: 4 | RNVC: 1
M24758/5-12-A: RNCC: 5 | RNVC: 1

14 Jun 2005

5975-01-531-6662
Electrical-Electronic Equipment Panel

015316662
2890W12G700: RNCC: 3 | RNVC: 2
289W12G700: RNCC: 5 | RNVC: 9

19 Jul 2005

5975-01-532-2980
Strain Electrical Conductor Clamp

015322980
30-302-3D10G09: RNCC: 3 | RNVC: 2

4 Aug 2005

5975-01-534-8990
Electrical Conduit Elbow

015348990
ELMFL90-100: RNCC: 3 | RNVC: 2
4SE00438-3: RNCC: 5 | RNVC: 9

7 Nov 2005

5975-01-535-1832
Electrical Tie Down Mounting Base

015351832
CTM210C2: RNCC: 3 | RNVC: 2

18 Nov 2005

5975-01-537-0955
Flexible Metal Conduit Assembly

015370955
23A02863-38: RNCC: 3 | RNVC: 2

26 Jan 2006

5975-01-538-0821
Electrical Equipment Leg Section

015380821
87001C0125: RNCC: 3 | RNVC: 2

9 Mar 2006

5975-01-538-4264
Electrical Cable Protector

015384264
9238990875: RNCC: 3 | RNVC: 2
923899.0875: RNCC: 5 | RNVC: 2
923899.0875: RNCC: 5 | RNVC: 2
CV187191: RNCC: 5 | RNVC: 2

22 Mar 2006

5975-01-538-3920
Electrical Box Connector

015383920
15864: RNCC: 3 | RNVC: 2
65457: RNCC: 5 | RNVC: 9

21 Mar 2006

5975-01-538-7953
Rigid Metal Conduit Assembly

015387953
23A02829-29: RNCC: 3 | RNVC: 2

30 Mar 2006

5975-01-538-6114
Aircr Rod End Gland

015386114
B93006-1: RNCC: 3 | RNVC: 2
B93006-1: RNCC: 5 | RNVC: 9

28 Mar 2006

5975-01-538-8243
Junction Box

015388243
743522: RNCC: 3 | RNVC: 2

31 Mar 2006

5975-01-540-9943
Cable Marker Sleeve

015409943
TMS-SCE-1K-1/4-2.0-9: RNCC: 3 | RNVC: 2
002892-01: RNCC: 7 | RNVC: 2

12 Jun 2006

5975-01-542-1817
Electrical Tie Down Mounting Base

015421817
CB9302V3: RNCC: 3 | RNVC: 2
193446096: RNCC: 5 | RNVC: 2
P39069: RNCC: 5 | RNVC: 2
9713218251: RNCC: 5 | RNVC: 2
5975PL1668337: RNCC: 6 | RNVC: 9

25 Jul 2006

5975-01-542-9993
Electric Box

015429993
M151-4989: RNCC: 3 | RNVC: 2

25 Aug 2006

5975-01-546-3533
Pack Heater

015463533
A-57227-1: RNCC: 3 | RNVC: 2
DG-0218-01 ITEM 24: RNCC: 5 | RNVC: 2
DG-0218-01: RNCC: D | RNVC: 9

14 Dec 2006

5975-01-546-6192
Electrical Conduit Bushing

015466192
A8110: RNCC: 3 | RNVC: 9
8274127 FIND 28: RNCC: 5 | RNVC: 9

21 Dec 2006

5975-01-548-5529
Symmetrical Rail

015485529
1492-DR9: RNCC: 3 | RNVC: 2
401-8214759 ITEM 3: RNCC: 5 | RNVC: 2
401-8214758 ITEM 3: RNCC: 5 | RNVC: 2
401-8214757 ITEM 3: RNCC: 5 | RNVC: 2

27 Feb 2007

5975-01-550-4088
Flexible Metal Conduit Assembly

015504088
306-9668: RNCC: 3 | RNVC: 2

18 Apr 2007

5975-01-544-4023
Cord Assembly Fastener

015444023
SCCLIP-B: RNCC: 3 | RNVC: 2

12 Oct 2006

5975-01-545-4742
Junction Box

015454742
7301K32: RNCC: 3 | RNVC: 2
7301K32: RNCC: 5 | RNVC: 2

14 Nov 2006

5975-01-464-4291
Special Purpose Ele

014644291
737506-1: RNCC: 3 | RNVC: 2
737506-1: RNCC: 3 | RNVC: 9

29 Apr 1999

5975-01-464-9101
Electrical Cable Nipple

014649101
224N3V02: RNCC: 3 | RNVC: 2
9325C08-1409-06: RNCC: 5 | RNVC: 2
932C08-1409-06: RNCC: 5 | RNVC: 9
2224N3V02: RNCC: 5 | RNVC: 9
932C08-1409: RNCC: D | RNVC: 9

13 May 1999

5975-01-468-1482
Electrical Grounding Plate

014681482
739021-14: RNCC: 3 | RNVC: 2

30 Sep 1999

5975-01-468-7925
Electrical Equipment Rack

014687925
807-630D-1: RNCC: 3 | RNVC: 2
807-630D-1: RNCC: 3 | RNVC: 9
807-630D: RNCC: D | RNVC: 9

22 Oct 1999

5975-01-466-7792
Flexible Nonmetallic Conduit

014667792
200AS349-054DG04041GA007: RNCC: 3 | RNVC: 2
200AS349-054DG04041GA007: RNCC: D | RNVC: 9

2 Aug 1999

5975-01-469-7573
Flexible Nonmetallic Conduit

014697573
7470: RNCC: 3 | RNVC: 2
737300: RNCC: 5 | RNVC: 9
737300: RNCC: 5 | RNVC: 9

23 Nov 1999

5975-01-471-8708
Strain Electrical Conductor Clamp

014718708
30-302-1D06J03: RNCC: 3 | RNVC: 2
30-302-1D06J03: RNCC: 5 | RNVC: 2
30-302-1D06J03: RNCC: 5 | RNVC: 2
30-302-1D06J03: RNCC: 5 | RNVC: 2
30-302-1D06J03: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-471-9839
Strain Electrical Conductor Clamp

014719839
30-302-2D10G19: RNCC: 3 | RNVC: 2
30-302-2D10G19: RNCC: 5 | RNVC: 2
30-302-2D10G19: RNCC: 5 | RNVC: 2
30-302-2D10G19: RNCC: 5 | RNVC: 2
30-302-2D10G19: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-472-0200
Strain Electrical Conductor Clamp

014720200
30-302-2D09G18: RNCC: 3 | RNVC: 2
30-302-2D09G18: RNCC: 5 | RNVC: 2
30-302-2D09G18: RNCC: 5 | RNVC: 2
30-302-2D09G18: RNCC: 5 | RNVC: 2
30-302-2D09G18: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-472-0341
Strain Electrical Conductor Clamp

014720341
30-302-2D04J09: RNCC: 3 | RNVC: 2
30-302: RNCC: 5 | RNVC: 2
30-302: RNCC: 5 | RNVC: 2
30-302: RNCC: 5 | RNVC: 2
30-302: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-472-0840
Strain Electrical Conductor Clamp

014720840
30-302-2D11G04: RNCC: 3 | RNVC: 2
30-302-2D11G04: RNCC: 5 | RNVC: 2
30-302-2D11G04: RNCC: 5 | RNVC: 2
30-302-2D11G04: RNCC: 5 | RNVC: 2
30-302-2D11G04: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-472-1127
Strain Electrical Conductor Clamp

014721127
30-302-2D05G11: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-8509
Electrical Conduit Coupling

014728509
16W295-9: RNCC: 3 | RNVC: 2
16W295: RNCC: D | RNVC: 9

20 Mar 2000

5975-01-472-7211
Rigid Metal Conduit

014727211
16W194-13: RNCC: 3 | RNVC: 2
16W194: RNCC: D | RNVC: 9

14 Mar 2000

5975-01-472-9008
Electrical Equipment Mounting Base

014729008
10208-3600-04: RNCC: 3 | RNVC: 2

29 Aug 2019

5975-01-476-8290
Electrical Components Tie Down Strap

014768290
3955T71: RNCC: 3 | RNVC: 2

25 Jul 2000

5975-01-476-0484
Electrical Components Tie Down Strap

014760484
SST2S-MO: RNCC: 3 | RNVC: 2

22 Jun 2000

5975-01-477-3404
Flexible Nonmetallic Conduit

014773404
9-333-102235: RNCC: 3 | RNVC: 2

7 Aug 2000

5975-01-480-5668
Electrical Box Connector

014805668
12421664-001: RNCC: 3 | RNVC: 2
12421664-001: RNCC: 5 | RNVC: 1
450: RNCC: 5 | RNVC: 1
3020: RNCC: 5 | RNVC: 1
12421664: RNCC: D | RNVC: 9

28 Nov 2000

5975-01-482-7002
Electrical Grounding Plate

014827002
901-011-259-102: RNCC: 3 | RNVC: 2

1 Mar 2001

5975-01-483-3218
Electronic Equipment Mounting Tray

014833218
8519849: RNCC: 3 | RNVC: 2
8519849: RNCC: 3 | RNVC: 2

23 Mar 2001

5975-01-485-7731
Rigid Metal Conduit Assembly

014857731
23A02336-81: RNCC: 3 | RNVC: 2
93160208: RNCC: 5 | RNVC: 2
3260AS459: RNCC: D | RNVC: 9

6 Jun 2001

5975-01-485-7736
Rigid Metal Conduit Assembly

014857736
3260AS681: RNCC: 1 | RNVC: 2
23A02336-93: RNCC: 3 | RNVC: 2
93160325: RNCC: 5 | RNVC: 1

6 Jun 2001

5975-01-485-7923
Rigid Metal Conduit Assembly

014857923
23A02336-49: RNCC: 3 | RNVC: 2
93160178: RNCC: 5 | RNVC: 1
3260AS416: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-485-7932
Rigid Metal Conduit Assembly

014857932
23A02336-34: RNCC: 3 | RNVC: 2
93160167: RNCC: 5 | RNVC: 1
3260AS399: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-486-5757
Electrical Cable Nipple

014865757
5M2117-004: RNCC: 3 | RNVC: 2
AC-408007-02: RNCC: 5 | RNVC: 2

5 Jul 2001

5975-01-490-6079
Electrical-Electronic Equipment Chassis

014906079
822450-1: RNCC: 3 | RNVC: 2
822450: RNCC: D | RNVC: 9

2 Oct 2001

5975-01-491-8520
Cable Marker Sleeve

014918520
HS190WE4WF152: RNCC: 3 | RNVC: 2
13160SOCN16100531-009: RNCC: 5 | RNVC: 2
16100531-009: RNCC: 5 | RNVC: 2

2 Nov 2001

5975-01-493-2315
Electrical Equipment Mounting Base

014932315
RF-384VM-01: RNCC: 3 | RNVC: 2
10208-3500-02: RNCC: 5 | RNVC: 9
RF-383VM-01: RNCC: 5 | RNVC: 9

20 Dec 2001

5975-01-493-8084
Nonmetallic Raceway Assembly

014938084
17-1-5681-1: RNCC: 3 | RNVC: 2
17-1-5681-1: RNCC: 5 | RNVC: 9
17-1-5681-1: RNCC: 5 | RNVC: 9
17-1-5681-1: RNCC: C | RNVC: 1

18 Jan 2002

5975-01-494-9200
End Anchor

014949200
1492EAH35: RNCC: 3 | RNVC: 2
M-303489-T5: RNCC: D | RNVC: 9

28 Feb 2002

5975-01-495-2931
Electrical Cable Nipple

014952931
214E1V02: RNCC: 3 | RNVC: 2
12422733-001: RNCC: 5 | RNVC: 2
214EV02: RNCC: 5 | RNVC: 9
214VE02: RNCC: 5 | RNVC: 9
12422733: RNCC: D | RNVC: 9

12 Mar 2002

5975-01-496-8868
Electrical Conduit Adapter

014968868
711HS078NF1112-4: RNCC: 3 | RNVC: 2
63A155258P18: RNCC: 5 | RNVC: 2
S4270FM6512S-34-4: RNCC: 5 | RNVC: 2
711-084: RNCC: D | RNVC: 9
63A155258: RNCC: D | RNVC: 9

30 Apr 2002

5975-01-497-0438
Ground Rod Kit

014970438
582GTEKIT: RNCC: 3 | RNVC: 2
99002C8008-1: RNCC: 7 | RNVC: 1
99002C8008: RNCC: D | RNVC: 9

7 May 2002

5975-01-499-1881
Electrical Cable Nipple

014991881
405N9V02: RNCC: 3 | RNVC: 2
NOC-TGS40: RNCC: 3 | RNVC: 9
12460416: RNCC: D | RNVC: 9

16 Jul 2002

5975-01-499-9308
Electrical Components Tie Down Strap

014999308
98-0281: RNCC: 3 | RNVC: 2
98-0281-03: RNCC: D | RNVC: 9

8 Aug 2002

5975-01-500-4277
Electrical Components Tie Down Strap

015004277
TY-35M-8: RNCC: 3 | RNVC: 2
PLC2S-S10-8: RNCC: 5 | RNVC: 9
6400188-105: RNCC: 7 | RNVC: 1
6400188-105: RNCC: 7 | RNVC: 1

26 Aug 2002

5975-01-501-1663
Electronic Equipment Mounting Tray

015011663
901-370-345-559: RNCC: 3 | RNVC: 2

26 Sep 2002

5975-01-505-3443
Electrical Conduit Adapter

015053443
710HS002NF1512: RNCC: 3 | RNVC: 2

4 Mar 2003

5975-01-506-5001
Electronic Equipment Mounting Tray

015065001
MT6-4311-105: RNCC: 3 | RNVC: 2

31 Mar 2003

5975-01-506-7101
Cable Hanger

015067101
RTD6075: RNCC: 3 | RNVC: 2

8 Apr 2003

5975-01-512-7896
Flexible Metal Conduit Assembly

015127896
CA00884-2A2WP3N00820: RNCC: 3 | RNVC: 2
CA00884-2A2WP3N00820: RNCC: 5 | RNVC: 9

10 Sep 2003

5975-01-512-8525
Stuffing Tube

015128525
6127777: RNCC: 3 | RNVC: 2

11 Sep 2003

5975-01-513-8180
Flexible Nonmetallic Conduit

015138180
SAE-AS81914/1: RNCC: 3 | RNVC: 1
M81914/2-1013: RNCC: 3 | RNVC: 2
M81914/1-1013: RNCC: 5 | RNVC: 9
MIL-T-81914: RNCC: 5 | RNVC: 9
M81914/1-1013: RNCC: 5 | RNVC: 9

7 Oct 2003

5975-01-513-4581
Electrical Components Tie Down Strap

015134581
T120MR-OHS: RNCC: 3 | RNVC: 2
327097C1: RNCC: 5 | RNVC: 2
327097C1: RNCC: 5 | RNVC: 9
PT08-28991: RNCC: D | RNVC: 9

25 Sep 2003

5975-01-516-3009
Electrical Conduit Adapter

015163009
SE23F0905-34: RNCC: 3 | RNVC: 2

30 Dec 2003

5975-01-517-1526
Kit Ground Rod

015171526
532621-01-01: RNCC: 3 | RNVC: 2
532621-01-01: RNCC: 5 | RNVC: 9

30 Jan 2004

5975-01-518-0999
Electrical-Electronic Equipment Chassis

015180999
RMC-3101-R: RNCC: 3 | RNVC: 2

2 Mar 2004

5975-01-521-2709
Electrical Conduit Coupling Nut

015212709
982-8061: RNCC: 3 | RNVC: 2
15012546: RNCC: 5 | RNVC: 2
81254390016: RNCC: 5 | RNVC: 2
4KK774: RNCC: 5 | RNVC: 2
9828061: RNCC: 5 | RNVC: 2
81.25439-0016: RNCC: 5 | RNVC: 2
81.25439-0016: RNCC: 5 | RNVC: 2
4KK774: RNCC: 5 | RNVC: 9

16 Jun 2004

5975-01-521-8349
Electrical-Electronic Equipment Panel

015218349
735112-1: RNCC: 3 | RNVC: 2
735112-1: RNCC: 3 | RNVC: 9

7 Jul 2004

5975-01-521-6763
Electrical Grounding Plate

015216763
A3265961: RNCC: 3 | RNVC: 2

29 Jun 2004

5975-01-523-8837
Electrical Conduit Adapter

015238837
713AL100NF14116: RNCC: 3 | RNVC: 2

17 Sep 2004

5975-01-524-0033
Electronic Equipment Mounting Tray

015240033
4600109-1: RNCC: 3 | RNVC: 2
04250416201959: RNCC: 5 | RNVC: 2
RMT-28: RNCC: 5 | RNVC: 2
7821640120AA: RNCC: 5 | RNVC: 2
RMT-28: RNCC: 5 | RNVC: 9

21 Sep 2004

5975-01-524-4812
Electronic Equipment Mounting Tray

015244812
01-40006-01: RNCC: 3 | RNVC: 9

5 Oct 2004

5975-01-525-9833
Electrical Equipment Cabinet Case

015259833
404193-101: RNCC: 3 | RNVC: 2

2 Dec 2004

5975-01-526-5518
Electrical Components Tie Down Strap

015265518
RT-1400-HSB: RNCC: 3 | RNVC: 2
70215K55: RNCC: 5 | RNVC: 9

22 Dec 2004

5975-01-526-7535
Air Cross Head Tool

015267535
627727-1: RNCC: 3 | RNVC: 2

6 Jan 2005

5975-01-526-8085
Electrical Nonmetallic Conduit Assembly

015268085
R58HB16F18Y010B: RNCC: 3 | RNVC: 2
R58HB16F18Y010B: RNCC: 5 | RNVC: 2
R58HB16F18Y010B: RNCC: 5 | RNVC: 9
R58HB16F18Y010B: RNCC: 5 | RNVC: 9
R58HB16F18Y010B: RNCC: 7 | RNVC: 2

7 Jan 2005

5975-01-528-3707
Electrical Wall Plate

015283707
5103-0: RNCC: 3 | RNVC: 2
3KH40: RNCC: 5 | RNVC: 2

10 Mar 2005

5975-01-527-6685
Stuffing Tube

015276685
NUS-3: RNCC: 3 | RNVC: 2
SBNUS-3: RNCC: 5 | RNVC: 9

11 Feb 2005

5975-01-528-9454
Electrical-Electronic Equipment Panel

015289454
5749063-027: RNCC: 3 | RNVC: 2

30 Mar 2005

5975-01-526-1749
Electrical Components Tie Down Strap

015261749
L-24-120-9-Q: RNCC: 3 | RNVC: 2
7130K912: RNCC: 5 | RNVC: 2

10 Dec 2004

5975-01-526-2210
Electrical Wall Plate

015262210
4512: RNCC: 3 | RNVC: 9

11 Dec 2004

5975-01-532-5222
Flexible Metal Conduit Assembly

015325222
750NA101NF24-240: RNCC: 3 | RNVC: 2
11477937: RNCC: 7 | RNVC: 2

11 Aug 2005

5975-01-533-9895
Stuffing Tube

015339895
6878100-1: RNCC: 1 | RNVC: 2
M19622/4-04MOD1: RNCC: 3 | RNVC: 2
470-6878100: RNCC: D | RNVC: 9

4 Oct 2005

5975-01-534-2331
Blank Panel

015342331
1001765-X1: RNCC: 3 | RNVC: 2
1001765: RNCC: 3 | RNVC: 9
2001232 REV D ITEM 61: RNCC: 5 | RNVC: 2
1001765-X1: RNCC: 5 | RNVC: 2
2001232 REV D ITEM 61: RNCC: 5 | RNVC: 9
1001765: RNCC: 5 | RNVC: 9
2001232: RNCC: D | RNVC: 9

13 Oct 2005

5975-01-534-5794
Terminal Cover Cable Chamber

015345794
C1WH6: RNCC: 3 | RNVC: 2
34518-17: RNCC: D | RNVC: 9

26 Oct 2005

5975-01-535-1366
Electrical Equipment Mounting Base

015351366
ABP-RM-1: RNCC: 3 | RNVC: 2
JKN00085853: RNCC: 5 | RNVC: 2
0212073 ITEM 20: RNCC: 5 | RNVC: 2
0212073: RNCC: D | RNVC: 9

16 Nov 2005

5975-01-536-7023
Elect Tiedown Strap

015367023
534-2040: RNCC: 3 | RNVC: 9

11 Jan 2006

5975-01-538-2087
Electrical Equipment Mounting Base

015382087
180010: RNCC: 3 | RNVC: 2
734-10030-2: RNCC: 5 | RNVC: 2
180010: RNCC: 5 | RNVC: 2

15 Mar 2006

5975-01-540-9475
Junction Box

015409475
50400: RNCC: 3 | RNVC: 2

8 Jun 2006

5975-01-543-9049
Junction Box

015439049
253M-076-700: RNCC: 3 | RNVC: 2
253-M0312-02: RNCC: 5 | RNVC: 9

26 Sep 2006

5975-01-543-9320
Electrical Grounding Plate

015439320
9057-0001: RNCC: 3 | RNVC: 2

26 Sep 2006

5975-01-544-0404
Electrical Equipment Mounting Base

015440404
282610-1: RNCC: 3 | RNVC: 2

28 Sep 2006

5975-01-545-3415
Strain Electrical Conductor Clamp

015453415
30-302-2D16J19: RNCC: 3 | RNVC: 2
30-302-2D16J19: RNCC: 5 | RNVC: 2
30-302-2D16J19: RNCC: 5 | RNVC: 2
30-302-2D16J19: RNCC: 5 | RNVC: 2
30-302-2D16J19: RNCC: 5 | RNVC: 2

9 Nov 2006

5975-01-545-9352
Electrical Grounding Plate

015459352
FP25223G1: RNCC: 3 | RNVC: 2

30 Nov 2006

5975-01-546-6072
Mate Aircraft Gland

015466072
41010181: RNCC: 3 | RNVC: 2

21 Dec 2006

5975-01-547-0715
Cable Marker Sleeve

015470715
TMS-CCUV-SLEEVE-4-X-65MM: RNCC: 3 | RNVC: 2

11 Jan 2007

5975-01-549-7772
Electrical-Electronic Equipment Panel

015497772
20871B: RNCC: 3 | RNVC: 2

29 Mar 2007

5975-01-550-1219
Stuffing Tube

015501219
236382312: RNCC: 3 | RNVC: 2
21641.6: RNCC: 5 | RNVC: 2

10 Apr 2007

5975-01-550-1237
Stuffing Tube

015501237
224281205: RNCC: 3 | RNVC: 2
21635.6: RNCC: 5 | RNVC: 2

10 Apr 2007

5975-01-527-5309
Electronic Junction Rack

015275309
M81714/16-6: RNCC: 3 | RNVC: 2
M81714/16-6: RNCC: 3 | RNVC: 9
AS81714/16: RNCC: 5 | RNVC: 1
M81714/16-6: RNCC: 5 | RNVC: 9
AS81714/16: RNCC: 5 | RNVC: 9

7 Feb 2005

5975-01-464-4287
El Contact Assy

014644287
61-844.012: RNCC: 3 | RNVC: 2

29 Apr 1999

5975-01-465-7129
Flexible Nonmetallic Conduit

014657129
SAE-AS81914/1: RNCC: 3 | RNVC: 1
M81914/1-1110: RNCC: 3 | RNVC: 2
SAE-AMS-5-81914/1-1110: RNCC: 5 | RNVC: 9
M81914/1-1110: RNCC: 5 | RNVC: 9

18 Jun 1999

5975-01-467-4287
Electrical Components Tie Down Strap

014674287
10-111189-C3: RNCC: 3 | RNVC: 2

30 Aug 1999

5975-01-470-4180
Stuffing Tube

014704180
SS-8A-65: RNCC: 3 | RNVC: 2
SS-8A-65: RNCC: 5 | RNVC: 9

20 Dec 1999

5975-01-471-8446
Strain Electrical Conductor Clamp

014718446
30-302-3D07G10: RNCC: 3 | RNVC: 2
BACC10KP3D0710N: RNCC: 5 | RNVC: 9
BACC10KP3D0710N: RNCC: 5 | RNVC: 9

17 Feb 2000

5975-01-471-8456
Strain Electrical Conductor Clamp

014718456
30-302-1D03J12: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0492
Strain Electrical Conductor Clamp

014720492
30-302-2C18J06: RNCC: 1 | RNVC: 2
30-302-2C18J06: RNCC: 3 | RNVC: 2
30-302-2C18J06: RNCC: 3 | RNVC: 2
30-302-2C18J06: RNCC: 3 | RNVC: 2
30-302-2C18J06: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-473-4503
Cable Hanger

014734503
51843-001: RNCC: 3 | RNVC: 2
51843: RNCC: D | RNVC: 9

10 Apr 2000

5975-01-473-7935
Junction Box

014737935
A12106CHNFSS6: RNCC: 3 | RNVC: 2
252-7043610: RNCC: D | RNVC: 9

17 Apr 2000

5975-01-475-6579
Electrical Box Connector

014756579
712AS263A2004-4B: RNCC: 3 | RNVC: 2
712-263: RNCC: D | RNVC: 9

8 Jun 2000

5975-01-477-5198
Junction Box

014775198
9333103193: RNCC: 3 | RNVC: 2

10 Aug 2000

5975-01-479-1900
Cable Strain Relief Bushing

014791900
9333103464: RNCC: 3 | RNVC: 2

13 Oct 2000

5975-01-479-1950
Electrical Components Tie Down Strap

014791950
3362618: RNCC: 3 | RNVC: 2
3362618: RNCC: 3 | RNVC: 9
7567K34: RNCC: 5 | RNVC: 2
9HE407: RNCC: 5 | RNVC: 9

13 Oct 2000

5975-01-479-9636
Electrical Box Connector

014799636
363: RNCC: 3 | RNVC: 2
0363: RNCC: 5 | RNVC: 2
4Q-75: RNCC: 5 | RNVC: 9

2 Nov 2000

5975-01-480-2229
Electrical Components Tie Down Strap

014802229
PLT3H-TL100: RNCC: 3 | RNVC: 2

9 Nov 2000

5975-01-480-5317
Electrical Equipment Mounting Base

014805317
607F489 GR2 PC 02: RNCC: 3 | RNVC: 2
PTC-2150157: RNCC: 5 | RNVC: 2

27 Nov 2000

5975-01-480-4405
Flexible Metal Conduit

014804405
802027107403-8: RNCC: 3 | RNVC: 2
802027107403: RNCC: D | RNVC: 9

21 Nov 2000

5975-01-481-9172
Electrical-Electronic Equipment Chassis

014819172
751-8944-001: RNCC: 3 | RNVC: 2
751-8944: RNCC: D | RNVC: 9

31 Jan 2001

5975-01-482-0362
Electrical Grounding Plate

014820362
7261682-1: RNCC: 3 | RNVC: 2
7261682: RNCC: D | RNVC: 9

6 Feb 2001

5975-01-484-1438
Electrical Box Connector

014841438
RWTT66-PMC: RNCC: 3 | RNVC: 2
RCTL04: RNCC: 5 | RNVC: 9
RCTL04N: RNCC: 5 | RNVC: 9

20 Apr 2001

5975-01-484-5988
Electrical Cable Protector

014845988
923828.0923: RNCC: 3 | RNVC: 2
923828.0923: RNCC: 5 | RNVC: 2

2 May 2001

5975-01-485-7715
Rigid Metal Conduit Assembly

014857715
23A02336-42: RNCC: 3 | RNVC: 2
93160171: RNCC: 5 | RNVC: 1
3260AS407: RNCC: D | RNVC: 9

6 Jun 2001

5975-01-485-1235
Electronic Junction Rack

014851235
CTJ-3A-08: RNCC: 3 | RNVC: 2
CTJ-3: RNCC: D | RNVC: 9

17 May 2001

5975-01-485-7921
Rigid Metal Conduit Assembly

014857921
23A02336-54: RNCC: 3 | RNVC: 2
93160182: RNCC: 5 | RNVC: 1
3260AS422: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-486-0371
Electrical Nonmetallic Conduit Assembly

014860371
23A01845-064: RNCC: 3 | RNVC: 2
2046AS072-64: RNCC: 5 | RNVC: 2
740NF102NFH131A321-12-120: RNCC: 5 | RNVC: 2
2046AS072: RNCC: 7 | RNVC: 1

18 Jun 2001

5975-01-485-7900
Rigid Metal Conduit Assembly

014857900
23A02336-98: RNCC: 3 | RNVC: 2
3260AS686: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-491-0717
Cable Hanger

014910717
022-01-009: RNCC: 3 | RNVC: 2

12 Oct 2001

5975-01-490-0292
Flexible Metal Conduit

014900292
4B69141-159A: RNCC: 3 | RNVC: 2
4B69141: RNCC: D | RNVC: 9

19 Sep 2001

5975-01-493-5503
Stuffing Tube Adapter

014935503
RSR-418-E: RNCC: 3 | RNVC: 2
9454167-9: RNCC: 5 | RNVC: 2
DCG100: RNCC: 5 | RNVC: 9
9454167: RNCC: D | RNVC: 9

9 Jan 2002

5975-01-494-2145
Electrical Cable Nipple

014942145
212N2T14: RNCC: 3 | RNVC: 2
10607953: RNCC: 5 | RNVC: 2

4 Feb 2002

5975-01-495-7071
Rigid Nonmetallic Conduit

014957071
120-100-1-1-14BE: RNCC: 3 | RNVC: 2
E21401A-000000: RNCC: 3 | RNVC: 2
63A155251P33: RNCC: 7 | RNVC: 2

22 Mar 2002

5975-01-496-1899
Electrical Cable Protector

014961899
172B5119: RNCC: 3 | RNVC: 1
172B5119P1: RNCC: 3 | RNVC: 2
172B5119P1: RNCC: 5 | RNVC: 9
172B5119: RNCC: D | RNVC: 9

5 Apr 2002

5975-01-499-0497
Electrical Conduit Adapter

014990497
SE23F2807-34: RNCC: 3 | RNVC: 2
SE23: RNCC: D | RNVC: 9

11 Jul 2002

5975-01-499-9454
Rigid Metal Conduit

014999454
96207-03811-102: RNCC: 3 | RNVC: 2
IT-5676-102: RNCC: 5 | RNVC: 9
301181-102: RNCC: 5 | RNVC: 9
96207-03811: RNCC: D | RNVC: 9

8 Aug 2002

5975-01-500-1924
Electrical Conduit Adapter

015001924
802027205200-3: RNCC: 3 | RNVC: 2
SE23R0501-34: RNCC: 5 | RNVC: 2
802027205200: RNCC: D | RNVC: 9

16 Aug 2002

5975-01-501-4257
Clickbond Mount

015014257
CB4020G3N8: RNCC: 3 | RNVC: 2

1 Oct 2002

5975-01-502-8011
Electrical Conductor Bushing

015028011
74B878001-167: RNCC: 1 | RNVC: 2
CT0904-167: RNCC: 3 | RNVC: 2
74B878001-167: RNCC: 5 | RNVC: 2

21 Nov 2002

5975-01-504-7548
Electrical-Electronic Equipment Chassis

015047548
0B40-0105-01: RNCC: 3 | RNVC: 2

7 Feb 2003

5975-01-504-0484
Electrical Components Tie Down Strap

015040484
HLT2I: RNCC: 3 | RNVC: 2
HLT2I-X0: RNCC: 5 | RNVC: 2
HLT2I-X0: RNCC: 5 | RNVC: 2
SS-26938: RNCC: D | RNVC: 9

16 Jan 2003

5975-01-506-9602
Cable Hanger

015069602
9M-13: RNCC: 3 | RNVC: 2
6512E17FN85: RNCC: D | RNVC: 9

15 Apr 2003

5975-01-507-6543
Tiedo Mounting Base

015076543
CB4019G3N: RNCC: 3 | RNVC: 2

1 May 2003

5975-01-507-8668
Electrical Components Tie Down Strap

015078668
35268788: RNCC: 3 | RNVC: 9
CV177836: RNCC: 5 | RNVC: 2
35268788: RNCC: 5 | RNVC: 2
35268788: RNCC: 5 | RNVC: 2

7 May 2003

5975-01-509-8090
Rigid Metal Conduit Assembly

015098090
23A02863-26: RNCC: 3 | RNVC: 2

3 Jul 2003

5975-01-512-0283
Electrical Components Tie Down Strap

015120283
66182AX: RNCC: 3 | RNVC: 2
66182AX: RNCC: 3 | RNVC: 9

21 Aug 2003

5975-01-512-7824
Flexible Metal Conduit Assembly

015127824
CA00884-2A2WF3N00480: RNCC: 3 | RNVC: 2
CA00884-2A2WF3N00480: RNCC: 5 | RNVC: 9

10 Sep 2003

5975-01-513-6721
Crossarm Brace

015136721
12005-1200-01: RNCC: 3 | RNVC: 2

2 Oct 2003

5975-01-513-5406
Flexible Metal Conduit Assembly

015135406
CA00884-5G5WK9W00642: RNCC: 3 | RNVC: 2
CA00884-5G5WK9W00642: RNCC: 5 | RNVC: 9

29 Sep 2003

5975-01-514-9329
Electrical Tie Down Mounting Base

015149329
23-13805-0062: RNCC: 3 | RNVC: 2
12-15612-001: RNCC: 5 | RNVC: 9

10 Nov 2003

5975-01-515-2053
Electrical Conduit Elbow

015152053
3362862: RNCC: 3 | RNVC: 2
3362862: RNCC: 3 | RNVC: 9
CF-22: RNCC: 5 | RNVC: 2

18 Nov 2003

5975-01-516-3850
Insulator Bracket

015163850
11480898: RNCC: 3 | RNVC: 2

6 Jan 2004

5975-01-516-8350
Electrical Cable Protector

015168350
33-00971: RNCC: 3 | RNVC: 2
33-00971: RNCC: 3 | RNVC: 9
33-00971: RNCC: 5 | RNVC: 2

22 Jan 2004

5975-01-518-7340
Electrical-Electronic Equipment Chassis

015187340
5112472-1: RNCC: 3 | RNVC: 2
FS-1270-GD03: RNCC: 5 | RNVC: 2
A109170 ITEM 1: RNCC: 5 | RNVC: 9
A109171-101-11: RNCC: 5 | RNVC: 9
A109170 ITEM 1: RNCC: C | RNVC: 1
A109171-101-11: RNCC: C | RNVC: 1

22 Mar 2004

5975-01-522-3892
Electrical Cable Protector

015223892
660-024NF13U7-05: RNCC: 3 | RNVC: 2

29 Jul 2004

5975-01-523-8493
Flexible Metal Conduit Assembly

015238493
750NA100NF32-18: RNCC: 3 | RNVC: 2

16 Sep 2004

5975-01-524-8300
Electrical Conduit Adapter

015248300
TX54AB00-2830-H: RNCC: 3 | RNVC: 2
ES7879-31C48W: RNCC: 5 | RNVC: 9
ES7879-31C48W: RNCC: C | RNVC: 1

19 Oct 2004

5975-01-525-1717
Cable Marker Sleeve

015251717
HS064WE1NF038: RNCC: 3 | RNVC: 2
911891-002: RNCC: 5 | RNVC: 2
16100531-018: RNCC: 5 | RNVC: 2

29 Oct 2004

5975-01-525-3170
Flexible Metal Conduit

015253170
M24758-D: RNCC: 2 | RNVC: 2
MIL-PRF-24758A: RNCC: 4 | RNVC: 1
M24758/1-08: RNCC: 5 | RNVC: 9

3 Nov 2004

5975-01-529-0024
Electrical-Electronic Equipment Panel

015290024
5749063-031: RNCC: 3 | RNVC: 2

31 Mar 2005

5975-01-529-1509
Flexible Nonmetallic Conduit

015291509
SAE-AS81914/6: RNCC: 3 | RNVC: 1
M81914/6-1105B: RNCC: 3 | RNVC: 2
M81914/5-1105 BLK: RNCC: 3 | RNVC: 9
M81914/5-1105 BLK: RNCC: 5 | RNVC: 9
M81914/5-1105 BLK: RNCC: 5 | RNVC: 9

6 Apr 2005

5975-01-529-5264
Electrical Conduit Adapter

015295264
S3844-7014-34G: RNCC: 3 | RNVC: 2

20 Apr 2005

5975-01-529-4215
Electrical-Electronic Equipment Panel

015294215
5749760-069: RNCC: 3 | RNVC: 2

15 Apr 2005

5975-01-530-8812
Cable Marker Sleeve

015308812
SS7094-S4-175-9: RNCC: 3 | RNVC: 2

15 Jun 2005

5975-01-530-8533
Stuffing Tube

015308533
630B007NF143H: RNCC: 3 | RNVC: 2

14 Jun 2005

5975-01-531-1972
Stuffing Tube

015311972
CF-8: RNCC: 3 | RNVC: 2
CS-FRAME-8: RNCC: 3 | RNVC: 9
10010060: RNCC: 5 | RNVC: 1

28 Jun 2005

5975-01-532-1171
Electrical Conduit Adapter

015321171
CD13NA-FE: RNCC: 3 | RNVC: 2

28 Jul 2005

5975-01-532-6557
Electrical Components Tie Down Strap

015326557
PLM2S: RNCC: 3 | RNVC: 2
88-20019-1: RNCC: 3 | RNVC: 2
88-20019: RNCC: 7 | RNVC: 2

16 Aug 2005

5975-01-533-4348
Electrical Conduit Coupling

015334348
7755K22: RNCC: 3 | RNVC: 2

15 Sep 2005

5975-01-533-7569
Electronic Equipment Mounting Tray

015337569
822-1756-001: RNCC: 3 | RNVC: 2

27 Sep 2005

5975-01-535-3794
Electrical Cable Protector

015353794
85085K4: RNCC: 3 | RNVC: 9
85085K4: RNCC: 5 | RNVC: 2
85085K4: RNCC: 5 | RNVC: 9

28 Nov 2005

5975-01-535-6454
Cable Marker Sleeve

015356454
PSPT-250-1YL: RNCC: 3 | RNVC: 2
18483: RNCC: 5 | RNVC: 1
PSPT-250-1Y: RNCC: 5 | RNVC: 9
10376890: RNCC: 6 | RNVC: 9

7 Dec 2005

5975-01-536-3589
Electrical Conduit Locknut

015363589
141: RNCC: 3 | RNVC: 2
141: RNCC: 3 | RNVC: 9

30 Dec 2005

5975-01-536-4525
Flexible Metal Conduit Assembly

015364525
23A02927-3: RNCC: 3 | RNVC: 2

5 Jan 2006

5975-01-536-8241
Electrical Equipment Mounting Base

015368241
12477900: RNCC: 3 | RNVC: 2

18 Jan 2006

5975-01-541-2551
Electrical Box Connector

015412551
7807K31: RNCC: 3 | RNVC: 2

21 Jun 2006

5975-01-546-0506
Electrical Cable Protector

015460506
A495620100: RNCC: 3 | RNVC: 2
CV185377: RNCC: 5 | RNVC: 2
A49562.0100: RNCC: 5 | RNVC: 2
A49562.0100: RNCC: 5 | RNVC: 2

5 Dec 2006

5975-01-549-3956
Electrical Tie Down Mounting Base

015493956
276015-1: RNCC: 3 | RNVC: 2

20 Mar 2007

5975-01-550-1225
Stuffing Tube

015501225
236382613: RNCC: 3 | RNVC: 2
21642.6: RNCC: 5 | RNVC: 2

10 Apr 2007

5975-01-550-1228
Stuffing Tube

015501228
245483014: RNCC: 3 | RNVC: 2
21643.6: RNCC: 5 | RNVC: 2

10 Apr 2007

5975-01-465-0384
Electrical Cable Nipple

014650384
216N2V14: RNCC: 3 | RNVC: 2
9325C08-1409-03: RNCC: 7 | RNVC: 2
9325C08-1409: RNCC: D | RNVC: 9

19 May 1999

5975-01-465-0815
Electrical Box Connector

014650815
3301: RNCC: 3 | RNVC: 2
B505643ITEM3: RNCC: 5 | RNVC: 9
B505643ITEM3: RNCC: 5 | RNVC: 9
001521046: RNCC: 6 | RNVC: 9

20 May 1999

5975-01-465-1561
Junction Box

014651561
11545-101: RNCC: 3 | RNVC: 2
11545-101: RNCC: 5 | RNVC: 9

24 May 1999

5975-01-465-3529
Electrical Equipment Mounting Base

014653529
174087-01: RNCC: 3 | RNVC: 2
10134303: RNCC: 6 | RNVC: 9

3 Jun 1999

5975-01-467-4678
Guide Rail

014674678
A3276933-1: RNCC: 3 | RNVC: 1
A3276933-1: RNCC: 3 | RNVC: 2

31 Aug 1999

5975-01-468-5879
Electrical Box Connector

014685879
CGB397: RNCC: 3 | RNVC: 2
CGB397: RNCC: 3 | RNVC: 9
78227413440: RNCC: 5 | RNVC: 1

15 Oct 1999

5975-01-468-7628
Guide Rail

014687628
08 01 733: RNCC: 3 | RNVC: 2
NS35/7.5 PERF 2000M: RNCC: 5 | RNVC: 2

21 Oct 1999

5975-01-466-1999
Electrical-Electronic Equipment Chassis

014661999
4023513-0504: RNCC: 3 | RNVC: 2

9 Jul 1999

5975-01-469-3781
Electrical Cable Protector

014693781
50-107-B09T: RNCC: 3 | RNVC: 2
50-107-B09T: RNCC: 5 | RNVC: 2
50-107-A09T: RNCC: 5 | RNVC: 9
50-093-A09T: RNCC: 5 | RNVC: 9

15 Nov 1999

5975-01-469-3786
Electrical Cable Protector

014693786
50-107-B11T: RNCC: 3 | RNVC: 2
50-093-A11T: RNCC: 5 | RNVC: 9

15 Nov 1999

5975-01-470-3875
Junction Box Cover

014703875
808C: RNCC: 3 | RNVC: 2
5715724: RNCC: 5 | RNVC: 2
808: RNCC: 5 | RNVC: 9

17 Dec 1999

5975-01-470-8357
Conduit Outlet

014708357
12965306: RNCC: 3 | RNVC: 2

11 Jan 2000

5975-01-470-3560
Electrical Cable Protector

014703560
ZT98-12-008: RNCC: 3 | RNVC: 2
HEZT98-12-008: RNCC: 5 | RNVC: 2

16 Dec 1999

5975-01-471-8445
Strain Electrical Conductor Clamp

014718445
30-302-1D03J09: RNCC: 3 | RNVC: 2
30-302-1D03J09: RNCC: 5 | RNVC: 2
30-302-1D03J09: RNCC: 5 | RNVC: 2
30-302-1D03J09: RNCC: 5 | RNVC: 2
30-302-1D03J09: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-471-8444
Strain Electrical Conductor Clamp

014718444
30-302-1D03J07: RNCC: 3 | RNVC: 2
30-302-1D03J07: RNCC: 5 | RNVC: 2
30-302-1D03J07: RNCC: 5 | RNVC: 2
30-302-1D03J07: RNCC: 5 | RNVC: 2
30-302-1D03J07: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-471-8591
Strain Electrical Conductor Clamp

014718591
30-302-2D18J06: RNCC: 3 | RNVC: 2
30-302-2D18J06: RNCC: 5 | RNVC: 2
30-302-2D18J06: RNCC: 5 | RNVC: 2
30-302-2D18J06: RNCC: 5 | RNVC: 2
30-302-2D18J06: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-471-8653
Strain Electrical Conductor Clamp

014718653
30-302-2D04J07: RNCC: 3 | RNVC: 2
30-302-2D04J07: RNCC: 5 | RNVC: 2
30-302-2D04J07: RNCC: 5 | RNVC: 2
30-302-2D04J07: RNCC: 5 | RNVC: 2
30-302-2D04J07: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-472-0193
Strain Electrical Conductor Clamp

014720193
30-302-2D10G04: RNCC: 3 | RNVC: 2
30-302-2D10G04: RNCC: 5 | RNVC: 2
30-302-2D10G04: RNCC: 5 | RNVC: 2
30-302-2D10G04: RNCC: 5 | RNVC: 2
30-302-2D10G04: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-472-0329
Strain Electrical Conductor Clamp

014720329
30-302-2D06G16: RNCC: 3 | RNVC: 2
30-302-2D06G16: RNCC: 3 | RNVC: 2
30-302-2D06G16: RNCC: 3 | RNVC: 2
30-302-2D06G16: RNCC: 3 | RNVC: 2
30-302-2D06G16: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0225
Strain Electrical Conductor Clamp

014720225
30-302-2D05G16: RNCC: 3 | RNVC: 2
30-302-2D05G16: RNCC: 3 | RNVC: 2
30-302-2D05G16: RNCC: 3 | RNVC: 2
30-302-2D05G16: RNCC: 3 | RNVC: 2
30-302-2D05G16: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0579
Strain Electrical Conductor Clamp

014720579
30-302-2D10G16: RNCC: 3 | RNVC: 2
30-302-2D10G16: RNCC: 5 | RNVC: 2
30-302-2D10G16: RNCC: 5 | RNVC: 2
30-302-2D10G16: RNCC: 5 | RNVC: 2
30-302-2D10G16: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-472-0624
Strain Electrical Conductor Clamp

014720624
30-302-2D17G05: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0846
Sectional Terminal Junction Block

014720846
BACM14L2A: RNCC: 3 | RNVC: 2
BACM14L2A: RNCC: 5 | RNVC: 9

17 Feb 2000

5975-01-472-1113
Strain Electrical Conductor Clamp

014721113
30-302-1D12G03: RNCC: 3 | RNVC: 2
30-302-1D12G03: RNCC: 5 | RNVC: 2
30-302-1D12G03: RNCC: 5 | RNVC: 2
30-302-1D12G03: RNCC: 5 | RNVC: 2
30-302-1D12G03: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-472-8501
Electrical Conduit Coupling

014728501
16W196-9: RNCC: 3 | RNVC: 2
16W196: RNCC: D | RNVC: 9

20 Mar 2000

5975-01-474-3827
Cable Hanger

014743827
8061722: RNCC: 3 | RNVC: 2
AT214442: RNCC: 5 | RNVC: 9

3 May 2000

5975-01-479-1828
Junction Box

014791828
9333103484: RNCC: 3 | RNVC: 2

13 Oct 2000

5975-01-479-0223
Flexible Nonmetallic Conduit

014790223
4745: RNCC: 3 | RNVC: 2
15007: RNCC: 5 | RNVC: 9

6 Oct 2000

5975-01-480-5326
Raceway Cover

014805326
12421507-003: RNCC: 3 | RNVC: 2
12421507-003: RNCC: 5 | RNVC: 2
12421507-003: RNCC: 5 | RNVC: 2
12421507: RNCC: D | RNVC: 9

27 Nov 2000

5975-01-480-5666
Electrical Conduit Elbow

014805666
12421665-001: RNCC: 3 | RNVC: 2
12421665-001: RNCC: 5 | RNVC: 2
351: RNCC: 5 | RNVC: 2
9856: RNCC: 5 | RNVC: 2
9856: RNCC: 5 | RNVC: 9
12421665-001: RNCC: 7 | RNVC: 2
12421665: RNCC: D | RNVC: 9

28 Nov 2000

5975-01-485-3615
Electrical Equipment Mounting Base

014853615
RAM-101MU: RNCC: 3 | RNVC: 2
889489-1: RNCC: 3 | RNVC: 9
889489-1: RNCC: 5 | RNVC: 2
RAM-D-111-M1U: RNCC: 5 | RNVC: 9
889498: RNCC: 5 | RNVC: 9
889489: RNCC: D | RNVC: 9

23 May 2001

5975-01-485-7916
Rigid Metal Conduit Assembly

014857916
23A02336-60: RNCC: 3 | RNVC: 2
93160188: RNCC: 5 | RNVC: 2
3260AS188: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-485-7920
Rigid Metal Conduit Assembly

014857920
3260AS423: RNCC: 1 | RNVC: 2
23A02336-55: RNCC: 3 | RNVC: 2
93160183: RNCC: 5 | RNVC: 1

7 Jun 2001

5975-01-485-7934
Rigid Metal Conduit Assembly

014857934
23A02336-33: RNCC: 3 | RNVC: 2
93160166: RNCC: 5 | RNVC: 2
3260AS398: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-486-0396
Electrical Nonmetallic Conduit Assembly

014860396
23A01845-069: RNCC: 3 | RNVC: 2
749-083-3: RNCC: 5 | RNVC: 2
2046AS072: RNCC: 7 | RNVC: 1
2046AS072-69: RNCC: 7 | RNVC: 2

18 Jun 2001

5975-01-487-0394
Junction Box

014870394
7219K23: RNCC: 3 | RNVC: 2

23 Jul 2001

5975-01-487-8469
Metallic Raceway Assembly

014878469
12250242: RNCC: 3 | RNVC: 2

21 Aug 2001

5975-01-490-3636
Electrical Box Connector

014903636
377-03204-000 ITEM 121: RNCC: 3 | RNVC: 2
025-33916-000: RNCC: 5 | RNVC: 2
377-03204-000: RNCC: D | RNVC: 9

26 Sep 2001

5975-01-491-0735
Electrical-Electronic Equipment Chassis

014910735
1756-A10: RNCC: 3 | RNVC: 2
40100085: RNCC: 5 | RNVC: 2
FN4.9604.902.57: RNCC: 5 | RNVC: 2

12 Oct 2001

5975-01-491-4593
Electrical Conduit Adapter

014914593
4B69137-107A: RNCC: 3 | RNVC: 9

22 Oct 2001

5975-01-491-3926
Insulator Bracket

014913926
2157M11G01: RNCC: 3 | RNVC: 2
2157M11: RNCC: D | RNVC: 9

19 Oct 2001

5975-01-495-9032
Junction Box

014959032
36779353: RNCC: 3 | RNVC: 2

27 Mar 2002

Load More Results