What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 103 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 103of 491

5975-12-323-9434
Flexible Metal Conduit Assembly

123239434
115.02.0013: RNCC: 2 | RNVC: 2
115.02.0013: RNCC: 3 | RNVC: 2

10 Jan 1991

5975-12-379-1036
Stuffing Tube

123791036
101.0908.00: RNCC: 3 | RNVC: 2
908047108: RNCC: 5 | RNVC: 2

23 Jun 2009

5975-20-000-5281
Junction Box

200005281
370200: RNCC: 3 | RNVC: 2

13 Dec 2002

5975-01-682-2894
Electrical Box Connector

016822894
F181853: RNCC: 3 | RNVC: 2
F185511/ REV/C ITEM #7: RNCC: D | RNVC: 9
F185511/ FIND SHEET 1: RNCC: D | RNVC: 9

31 Jul 2019

5975-01-697-6049
Chassis Base

016976049
901-077-151-101: RNCC: 3 | RNVC: 2

30 Sep 2021

5975-01-674-2972
Electrical-Electronic Equipment Chassis

016742972
4100ASY015-0001: RNCC: 3 | RNVC: 2

20 Jul 2018

5975-01-605-3672
Electrical-Electronic Equipment Panel

016053672
7-611660003-101: RNCC: 3 | RNVC: 2

19 Apr 2012

5975-01-602-8793
Blank Panel

016028793
13229E6331: RNCC: 3 | RNVC: 2
13229E6331: RNCC: 3 | RNVC: 2

10 Feb 2012

5975-01-681-3367
Electrical-Electronic Equipment Chassis

016813367
K17839-2-NHC: RNCC: 3 | RNVC: 2

13 Jun 2019

5975-01-668-2201
Junction Box

016682201
CSD16128: RNCC: 3 | RNVC: 2

14 Nov 2017

5975-01-683-1928
Electrical-Electronic Equipment Chassis

016831928
901-005-800-113: RNCC: 3 | RNVC: 2
PL901-005-800-113: RNCC: C | RNVC: 1
901-005-800: RNCC: D | RNVC: 9

12 Sep 2019

5975-01-683-4675
Electrical Cable Nipple

016834675
487N9V14: RNCC: 3 | RNVC: 2

24 Sep 2019

5975-01-694-2541
Electrical Equipment Rack

016942541
505M/0139: RNCC: 3 | RNVC: 2

24 Mar 2021

5975-01-669-9238
Switch Box Case

016699238
170327-1: RNCC: 3 | RNVC: 2
170327-1: RNCC: 5 | RNVC: 2
170327: RNCC: D | RNVC: 9

29 Jan 2018

5975-12-173-1194
Cable Marker Sleeve

121731194
0252601506: RNCC: 3 | RNVC: 2
405.11.0005: RNCC: 5 | RNVC: 2
25260-1SW: RNCC: 5 | RNVC: 9
2526-0-1: RNCC: 5 | RNVC: 9
2526.0-1: RNCC: 5 | RNVC: 9

20 Mar 1978

5975-01-675-8455
Sensor Pressure

016758455
23089830: RNCC: 3 | RNVC: 2

30 Sep 2018

5975-01-657-4296
Electrical Conduit Adapter

016574296
M24758-2CL: RNCC: 3 | RNVC: 2

12 Aug 2016

5975-01-657-7640
Electrical Cable Protector

016577640
7225905: RNCC: 3 | RNVC: 2

29 Aug 2016

5975-01-653-5930
Electrical Grounding Plate

016535930
VGA12038: RNCC: 3 | RNVC: 2

30 Mar 2016

5975-14-312-0825
Electrical Components Tie Down Strap

143120825
E0043-5A9: RNCC: 1 | RNVC: 2
32037: RNCC: 3 | RNVC: 2
T30R-NATURELLE: RNCC: 3 | RNVC: 2
PLT1-5I: RNCC: 3 | RNVC: 2
91558830: RNCC: 5 | RNVC: 2

1 Jan 1974

5975-12-395-7828
Junction Box

5975-01-596-6883
Rigid Metal Conduit

015966883
712AS178M1212-31: RNCC: 3 | RNVC: 2

23 May 2011

5975-01-605-8024
Metallic Raceway Assembly

016058024
R0125377: RNCC: 3 | RNVC: 2
R0125377: RNCC: 5 | RNVC: 2
R0125377-0103: RNCC: D | RNVC: 9

25 Apr 2012

5975-01-598-7406
Electrical Wall Plate

015987406
558510-1: RNCC: 3 | RNVC: 2

24 Aug 2011

5975-01-600-8657
Rigid Metal Conduit

016008657
600235-2: RNCC: 3 | RNVC: 2
FF-18500: RNCC: D | RNVC: 9

22 Dec 2011

5975-01-619-8588
Mounting Plate

016198588
MC-001215-04: RNCC: 3 | RNVC: 2
97-3760 ITEM 144: RNCC: 5 | RNVC: 2

20 Jun 2013

5975-01-647-7596
Electrical Equipment Mounting Base

016477596
51570101-516: RNCC: 3 | RNVC: 2

31 Aug 2015

5975-01-647-7732
Junction Box

016477732
147G102XMS-0006: RNCC: 3 | RNVC: 2
147-102-0006: RNCC: D | RNVC: 9

1 Sep 2015

5975-01-677-4536
Electrical Cable Protector

016774536
BB3-075-BY: RNCC: 3 | RNVC: 9

14 Dec 2018

5975-01-689-9565
Cable Terminal Chamber

016899565
1833166: RNCC: 3 | RNVC: 2

17 Jul 2020

5975-01-678-4240
Rigid Metal Conduit Assembly

016784240
2-60216-39: RNCC: 3 | RNVC: 2

6 Feb 2019

5975-01-681-8450
Electrical Components Tie Down Strap

016818450
SAE-AS23190: RNCC: 3 | RNVC: 1
MS3367-11-0: RNCC: 3 | RNVC: 2
AS33671: RNCC: 5 | RNVC: 1

10 Jul 2019

5975-01-684-4601
Cable Marker Sleeve

016844601
TMS-SCE-2X-3/4-4: RNCC: 3 | RNVC: 2

4 Nov 2019

5975-01-649-9294
Electronic Equipment Mounting Tray

016499294
2703-3900-503-101: RNCC: 3 | RNVC: 2

16 Nov 2015

5975-01-657-9860
Junction Box

016579860
Y689-1703PNA1: RNCC: 1 | RNVC: 2
401-8541796PNA1: RNCC: 3 | RNVC: 2

8 Sep 2016

5975-01-659-0390
Electrical-Electronic Equipment Panel

016590390
0015-04-0039: RNCC: 3 | RNVC: 2
07011P1111: RNCC: 7 | RNVC: 2

1 Nov 2016

5975-01-664-2022
Electrical Grounding Plate

016642022
8M0056666: RNCC: 3 | RNVC: 2

9 Jun 2017

5975-01-665-3957
Conduit Fitting

016653957
507-CON-FIT-3/8LIQ-1/2-ST: RNCC: 3 | RNVC: 2

27 Jul 2017

5975-01-654-3150
Electrical-Electronic Equipment Chassis

016543150
4396: RNCC: 3 | RNVC: 2

25 Apr 2016

5975-01-654-9500
Flexible Metal Conduit

016549500
55082103: RNCC: 3 | RNVC: 2

13 May 2016

5975-21-910-4482
Electrical Components Tie Down Strap

219104482
8428100: RNCC: 3 | RNVC: 2

20 Apr 1993

5975-98-207-7013
Interconnecting Box

982077013
CTITF04002: RNCC: 3 | RNVC: 2

26 Jul 2012

5975-99-838-2620
Electrical Components Tie Down Strap

998382620
T30MR9C2: RNCC: 3 | RNVC: 2

27 Mar 2013

5975-01-695-8028
Flexible Nonmetallic Conduit

016958028
43-CT5/8: RNCC: 3 | RNVC: 2
65H8905: RNCC: 5 | RNVC: 2
CLTS62N-C: RNCC: 5 | RNVC: 2
601865: RNCC: 7 | RNVC: 2

24 Jun 2021

5975-01-550-1234
Stuffing Tube

015501234
224281808: RNCC: 3 | RNVC: 2
21638.6: RNCC: 5 | RNVC: 2

10 Apr 2007

5975-01-552-6447
Electrical Conduit Adapter

015526447
J15K0031-1: RNCC: 3 | RNVC: 2

20 Jun 2007

5975-01-554-0979
Electrical Nonmetallic Conduit Assembly

015540979
8226416: RNCC: 3 | RNVC: 2

30 Jul 2007

5975-01-554-7854
Electrical Equipment Mounting Base

015547854
816-3361-001: RNCC: 3 | RNVC: 2

20 Aug 2007

5975-01-554-8003
Electrical-Electronic Equipment Panel

015548003
263514101-0003: RNCC: 3 | RNVC: 2
263514101-0003: RNCC: 3 | RNVC: 2
7607627-263514101-1-2: RNCC: 5 | RNVC: 2
2635-141-01 ITEM 3: RNCC: 5 | RNVC: 2

20 Aug 2007

5975-01-555-8575
Electrical Components Tie Down Strap

015558575
PC18-BK: RNCC: 3 | RNVC: 9
46AZ78: RNCC: 5 | RNVC: 2
60976: RNCC: 5 | RNVC: 9
G675801-2: RNCC: D | RNVC: 9

17 Sep 2007

5975-01-555-9761
Cable Collar

015559761
BB-F20-15KW-BT: RNCC: 3 | RNVC: 2

19 Sep 2007

5975-01-557-6324
Electrical-Electronic Equipment Panel

015576324
R0069123: RNCC: 3 | RNVC: 2
R0069123: RNCC: 5 | RNVC: 2
R0069123-0102: RNCC: D | RNVC: 9

25 Oct 2007

5975-01-557-7172
Electrical Nonmetallic Conduit Assembly

015577172
R58HB14C32A018: RNCC: 3 | RNVC: 2
R58HB14C32A018: RNCC: 3 | RNVC: 2
R58HB14C32A018: RNCC: 5 | RNVC: 9

25 Oct 2007

5975-01-559-0051
Electrical Cable Protector

015590051
UHB5060: RNCC: 3 | RNVC: 9

3 Dec 2007

5975-01-559-2409
Rigid Metal Conduit

015592409
A-A-50553-12L201A: RNCC: 2 | RNVC: 2

11 Dec 2007

5975-01-559-4971
Electrical Grounding Plate

015594971
7147-1167-1: RNCC: 3 | RNVC: 2

19 Dec 2007

5975-01-560-7225
Electrical-Electronic Equipment Chassis

015607225
1756-A13: RNCC: 3 | RNVC: 2
P0006120: RNCC: 5 | RNVC: 2
437-NAG-LSD49-01 ITEM 8: RNCC: 5 | RNVC: 2
40100086: RNCC: 5 | RNVC: 2

11 Feb 2008

5975-01-562-0497
Power Supply Assembly Servo

015620497
13D150120-01: RNCC: 3 | RNVC: 2

27 Mar 2008

5975-01-562-3033
Electrical Equipment Rack

015623033
SMART2200RMXL2U: RNCC: 3 | RNVC: 2
FCPWS0042: RNCC: 5 | RNVC: 2
DATA SHEET 2: RNCC: 5 | RNVC: 2
B-2551 ITEM 5: RNCC: 5 | RNVC: 9

3 Apr 2008

5975-01-563-2992
Electrical Components Tie Down Strap

015632992
24ITCBNG/INTER: RNCC: 3 | RNVC: 2
6432885-01M1: RNCC: 5 | RNVC: 2
456720103610: RNCC: 6 | RNVC: 9
6432885-01M1: RNCC: 7 | RNVC: 2

7 May 2008

5975-01-565-9704
Electrical Components Tie Down Strap

015659704
K01499: RNCC: 3 | RNVC: 2
12509160-002: RNCC: 5 | RNVC: 2
12509160-002: RNCC: 7 | RNVC: 2
12509160: RNCC: D | RNVC: 9

14 Aug 2008

5975-01-566-9681
Door Assist Module

015669681
645665: RNCC: 3 | RNVC: 2
006397: RNCC: 5 | RNVC: 2
1QAN-MC2-10: RNCC: 5 | RNVC: 9

15 Sep 2008

5975-01-568-6280
Vehicular Airconditioning-Heating Duct Assembly

015686280
3691326C1: RNCC: 3 | RNVC: 2
0147120571-00: RNCC: 5 | RNVC: 2
0147120571-00: RNCC: 5 | RNVC: 9
3691326C1L: RNCC: 5 | RNVC: 9
0147120571-00: RNCC: 5 | RNVC: 9
3681326C1: RNCC: D | RNVC: 9

4 Nov 2008

5975-01-578-0161
Flexible Nonmetallic Conduit

015780161
61815155: RNCC: 3 | RNVC: 2
1491-300-IT100: RNCC: 5 | RNVC: 2

24 Sep 2009

5975-01-578-0257
Flexible Nonmetallic Conduit

015780257
61815145: RNCC: 3 | RNVC: 2
1491-300-IT99: RNCC: 5 | RNVC: 2

24 Sep 2009

5975-01-579-9017
Electrical Equipment Rack

015799017
12490570: RNCC: 3 | RNVC: 2

27 Nov 2009

5975-01-579-5196
Electrical Tie Down Mounting Base

015795196
2474243: RNCC: 3 | RNVC: 2

16 Nov 2009

5975-01-583-5994
Electrical Equipment Leg

015835994
3861221: RNCC: 3 | RNVC: 2
3861221: RNCC: 5 | RNVC: 9

30 Mar 2010

5975-01-583-5971
Electrical Equipment Shelf

015835971
3858849: RNCC: 3 | RNVC: 2
3858849: RNCC: 5 | RNVC: 9

30 Mar 2010

5975-01-584-1127
Electrical Components Tie Down Strap

015841127
DCT90HIRC2: RNCC: 3 | RNVC: 2
3535872C1: RNCC: 5 | RNVC: 2
3535872C1: RNCC: 5 | RNVC: 2

16 Apr 2010

5975-01-584-4614
Cable Marker Sleeve

015844614
TMS-CCUV-SLEEVE-7: RNCC: 3 | RNVC: 2
TMS-CCUV-SLEEVE-7-X-65MM: RNCC: 3 | RNVC: 2

27 Apr 2010

5975-01-571-1097
Insulator Bracket

015711097
AM1DP200: RNCC: 3 | RNVC: 2

23 Jan 2009

5975-01-572-0507
Electrical-Electronic Equipment Chassis

015720507
1756-A17: RNCC: 3 | RNVC: 2
401-8283371 ITEM 29: RNCC: 5 | RNVC: 2
10F247-E2 ITEM 29: RNCC: D | RNVC: 9

25 Feb 2009

5975-01-572-3938
Cable Collar

015723938
N1912-21003: RNCC: 3 | RNVC: 2
N1912-21003: RNCC: 3 | RNVC: 9
N1912-21003-1: RNCC: D | RNVC: 9

10 Mar 2009

5975-01-573-9379
Electrical Equipment Mounting Base

015739379
13011379: RNCC: 3 | RNVC: 2

8 May 2009

5975-01-574-6444
Metallic Raceway

015746444
G-582-OS-1GN: RNCC: 3 | RNVC: 2
3310T126: RNCC: 5 | RNVC: 2

3 Jun 2009

5975-01-575-4925
Electrical Conduit End Seal Disk

015754925
AS250: RNCC: 3 | RNVC: 2
793825 ITEM NO 8: RNCC: 5 | RNVC: 2

2 Jul 2009

5975-01-576-7435
Electrical Equipment Rack

015767435
12505987-009: RNCC: 3 | RNVC: 2

12 Aug 2009

5975-01-591-4878
Arc Chute Assy

015914878
198937-T01: RNCC: 3 | RNVC: 2

27 Jan 2011

5975-01-591-5722
Buffer Lever Assy

015915722
747018-K01: RNCC: 3 | RNVC: 2
747018K01: RNCC: 3 | RNVC: 2

31 Jan 2011

5975-01-591-5868
Uv Resistor Assy

015915868
748080-K06: RNCC: 3 | RNVC: 2

1 Feb 2011

5975-01-592-1515
Electrical Grounding Plate

015921515
3827199: RNCC: 3 | RNVC: 2
3827199: RNCC: 5 | RNVC: 9

23 Feb 2011

5975-01-591-5870
Panel Assy

015915870
748085-K02: RNCC: 3 | RNVC: 2

1 Feb 2011

5975-01-592-3597
Electrical-Electronic Equipment Panel

015923597
28023-320-0221/RS(A05,A10): RNCC: 3 | RNVC: 2

3 Mar 2011

5975-01-591-9044
Electrical-Electronic Equipment Chassis

015919044
4502192: RNCC: 3 | RNVC: 2

15 Feb 2011

5975-01-595-7078
Cable Marker Sleeve

015957078
3907AS2010-98: RNCC: 3 | RNVC: 2

5 May 2011

5975-01-596-6892
Electrical Grounding Plate

015966892
03002A1840-15: RNCC: 3 | RNVC: 2

23 May 2011

5975-01-596-7347
Electrical Grounding Plate

015967347
03002A1800-5: RNCC: 3 | RNVC: 2

24 May 2011

5975-01-585-2342
Electrical Equipment Mounting Base

015852342
RF-5074VSM-03: RNCC: 3 | RNVC: 9
RF-5074VSM-03: RNCC: 5 | RNVC: 2
10181-5074-03: RNCC: 5 | RNVC: 9
5975PL1623699: RNCC: 6 | RNVC: 9
RF-5074VSM-03: RNCC: C | RNVC: 1

19 May 2010

5975-01-584-7842
Electrical Components Tie Down Strap

015847842
200070: RNCC: 3 | RNVC: 2

6 May 2010

5975-01-586-9477
Electrical Conduit Locknut

015869477
5XC31: RNCC: 3 | RNVC: 2

20 Jul 2010

5975-01-588-4599
Rigid Metal Conduit

015884599
5251832: RNCC: 3 | RNVC: 2

20 Sep 2010

5975-01-589-6164
Electrical Equipment Mounting Base

015896164
3898062: RNCC: 3 | RNVC: 2
3898062: RNCC: 5 | RNVC: 9

1 Nov 2010

5975-01-596-7354
Electrical Grounding Plate

015967354
03002A1840-23: RNCC: 3 | RNVC: 2

24 May 2011

5975-01-596-4415
Electrical-Electronic Equipment Panel

015964415
150557: RNCC: 3 | RNVC: 2

17 May 2011

5975-01-597-2140
Electrical Equipment Rack

015972140
7019302: RNCC: 3 | RNVC: 2

2 Jun 2011

5975-01-608-0233
Radio Frequency Cable Splicing Kit

016080233
90044-00: RNCC: 3 | RNVC: 2
NP90044-00: RNCC: 5 | RNVC: 2

20 Jun 2012

5975-01-609-4623
Semiconductor Device Cover

016094623
4L61008-101A: RNCC: 3 | RNVC: 2
4L61008-101A: RNCC: 5 | RNVC: 2
4L61008: RNCC: D | RNVC: 9

26 Jul 2012

5975-01-609-8890
Cable Marker Sleeve

016098890
TMS-SCE-1K-2-2.0-9: RNCC: 3 | RNVC: 2

6 Aug 2012

5975-01-602-5062
Outlet Box

016025062
R1H31LM: RNCC: 3 | RNVC: 2

31 Jan 2012

5975-01-603-7853
Electrical Equipment Rack

016037853
RA7002-19: RNCC: 3 | RNVC: 2
RA7002-19: RNCC: 5 | RNVC: 9

15 Mar 2012

5975-01-610-5312
Electrical Entrance Elbow

016105312
901-031-332-130: RNCC: 3 | RNVC: 2

21 Aug 2012

5975-01-610-6710
Electrical Nonmetallic Conduit Assembly

016106710
3260AS1328-54: RNCC: 1 | RNVC: 2
749-844-54: RNCC: 3 | RNVC: 2
3260AS1328: RNCC: D | RNVC: 9

24 Aug 2012

5975-01-610-9149
Electrical Nonmetallic Conduit Assembly

016109149
3260AS1328-41: RNCC: 1 | RNVC: 2
749-844-41: RNCC: 3 | RNVC: 2
3260AS1328: RNCC: D | RNVC: 9

30 Aug 2012

5975-01-611-0160
Electrical Nonmetallic Conduit Assembly

016110160
3260AS1328-5: RNCC: 3 | RNVC: 2

4 Sep 2012

5975-01-613-7922
Electrical Grounding Plate

016137922
03002B7019: RNCC: 3 | RNVC: 2

16 Nov 2012

5975-01-613-8314
Junction Box

016138314
6D60911-003: RNCC: 3 | RNVC: 2
6D60911-003: RNCC: 5 | RNVC: 1
6D60883FIND9: RNCC: 5 | RNVC: 9

19 Nov 2012

5975-01-616-0580
Junction Box

016160580
F163463: RNCC: 3 | RNVC: 2
F143203 REV B ITEM NO. 30: RNCC: 5 | RNVC: 2

30 Jan 2013

5975-01-615-9450
Conduit Outlet Cover

016159450
OL-10: RNCC: 3 | RNVC: 2
08018B4126: RNCC: 7 | RNVC: 2

28 Jan 2013

5975-01-616-0754
Mounting Plate

016160754
7-611B11014-101: RNCC: 3 | RNVC: 2

31 Jan 2013

5975-01-616-3210
Electrical Equipment Cabinet

016163210
245STDD5421ZX: RNCC: 3 | RNVC: 2
13530275-1: RNCC: 3 | RNVC: 2
13530275: RNCC: 7 | RNVC: 2

8 Feb 2013

5975-01-616-4377
Electrical Equipment Cabinet

016164377
13530276-9: RNCC: 3 | RNVC: 2
340ST005427ZX: RNCC: 5 | RNVC: 2

13 Feb 2013

5975-01-617-0684
Flexible Nonmetallic Conduit

016170684
BC261-16-100: RNCC: 3 | RNVC: 2
LN0000333: RNCC: 5 | RNVC: 9

8 Mar 2013

5975-01-617-1049
Flexible Nonmetallic Conduit

016171049
0708155: RNCC: 3 | RNVC: 2
10015125: RNCC: 5 | RNVC: 2

12 Mar 2013

5975-01-617-2468
Electrical Equipment Cabinet

016172468
340STDN5409ZX: RNCC: 3 | RNVC: 2
13530276-3: RNCC: 3 | RNVC: 2

18 Mar 2013

5975-01-617-6608
Electrical Box Connector

016176608
AX4737-2824-SP: RNCC: 3 | RNVC: 2
AX 737-TAB: RNCC: D | RNVC: 9

29 Mar 2013

5975-01-617-7910
Electrical Wall Plate

016177910
E98TSCN-CAR: RNCC: 3 | RNVC: 2

3 Apr 2013

5975-01-617-7841
Electrical Conduit Adapter

016177841
5330: RNCC: 3 | RNVC: 2

3 Apr 2013

5975-01-642-7747
Cable Reten Support

016427747
2010775-1: RNCC: 3 | RNVC: 2

9 Mar 2015

5975-01-619-6209
Electrical-Electronic Equipment Panel

016196209
SMA-00720: RNCC: 3 | RNVC: 2
ACS001001: RNCC: D | RNVC: 9

10 Jun 2013

5975-01-644-4955
Electrical Equipment Rack

016444955
12505987-007: RNCC: 3 | RNVC: 2
12505987: RNCC: D | RNVC: 9

8 May 2015

5975-01-644-0866
Electrical Cable Protector

016440866
YJ3-225: RNCC: 3 | RNVC: 9

22 Apr 2015

5975-01-620-0800
Conduit Chase Nipple

016200800
CN-501: RNCC: 3 | RNVC: 2
HA 801: RNCC: 5 | RNVC: 2
11B294136: RNCC: 5 | RNVC: 2

1 Jul 2013

5975-01-619-9966
Knockout Reducing Washer

016199966
68205B: RNCC: 3 | RNVC: 2
7513K371: RNCC: 5 | RNVC: 2

25 Jun 2013

5975-01-645-9130
Electrical Cable Protector

016459130
50-107-B06T: RNCC: 3 | RNVC: 2

2 Jul 2015

5975-01-647-8390
Electrical Fitting Mounting Base

016478390
2HZD8: RNCC: 3 | RNVC: 2
AP 232SQ EG: RNCC: 5 | RNVC: 2
2HZD8: RNCC: 5 | RNVC: 2

3 Sep 2015

5975-01-621-5806
Electrical-Electronic Equipment Chassis

016215806
BSM-489-01: RNCC: 3 | RNVC: 2

12 Sep 2013

5975-01-621-8141
Line Supporting Strap

016218141
PL7518E09FIND31: RNCC: 3 | RNVC: 2
TYS12-470C: RNCC: 5 | RNVC: 2

18 Sep 2013

5975-01-624-0279
Electrical Cable Protector

016240279
C000100301000: RNCC: 3 | RNVC: 2
BPC30034ACITEM13: RNCC: 5 | RNVC: 2
C000100301000: RNCC: 5 | RNVC: 2

12 Dec 2013

5975-01-626-9127
Electrical Components Tie Down Strap

016269127
T50R0: RNCC: 3 | RNVC: 2

25 Mar 2014

5975-01-626-3116
Electrical Equipment Mounting Base

016263116
CB3019AA2N750: RNCC: 3 | RNVC: 2

5 Mar 2014

5975-01-628-0511
Electrical Equipment Mounting Base

016280511
7013921: RNCC: 1 | RNVC: 2
12109-6410-01: RNCC: 3 | RNVC: 2
12109-6410-01: RNCC: 5 | RNVC: 2

7 May 2014

5975-01-630-8862
Electrical Equipment Shelf

016308862
12560928: RNCC: 3 | RNVC: 2
12560928: RNCC: 5 | RNVC: 2
12560928: RNCC: D | RNVC: 9

21 Aug 2014

5975-01-631-2223
Electronic Equipment Mounting Tray

016312223
13015848: RNCC: 3 | RNVC: 2

4 Sep 2014

5975-01-656-8552
Electrical-Electronic Equipment Panel

016568552
8691517: RNCC: 3 | RNVC: 2

20 Jul 2016

5975-01-690-0780
Electrical Grounding Plate

016900780
885368-08804: RNCC: 3 | RNVC: 2
885368: RNCC: D | RNVC: 9

24 Jul 2020

5975-01-666-6796
Knockout Reducing Washer

016666796
XM554-B6199-1: RNCC: 3 | RNVC: 2
B6199 REV A: RNCC: 5 | RNVC: 2

15 Sep 2017

5975-01-669-1654
Mounting Plate

016691654
3200300-101: RNCC: 3 | RNVC: 2
3200300: RNCC: D | RNVC: 9

26 Dec 2017

5975-01-695-8033
Electrical Cable Protector

016958033
505201: RNCC: 3 | RNVC: 9

24 Jun 2021

5975-01-681-9477
Ground Rod

016819477
701-W-R-550: RNCC: 3 | RNVC: 2

15 Jul 2019

5975-12-173-1195
Cable Marker Sleeve

121731195
0252602000: RNCC: 3 | RNVC: 2
405.11.0006: RNCC: 5 | RNVC: 2
2526-0-2: RNCC: 5 | RNVC: 9
2526.0-2: RNCC: 5 | RNVC: 9
25260-2SW: RNCC: 5 | RNVC: 9

20 Mar 1978

5975-12-186-2519
Cable Marker Sleeve

121862519
0252609000: RNCC: 3 | RNVC: 2
405.11.0013: RNCC: 5 | RNVC: 2
2526-0-9: RNCC: 5 | RNVC: 9
2526.0-9: RNCC: 5 | RNVC: 9
25260-9SW: RNCC: 5 | RNVC: 9
025260-9: RNCC: 5 | RNVC: 9

9 Dec 1980

5975-01-685-5590
Cable Marker Sleeve

016855590
TMS-SCE-2X-3/32-4: RNCC: 3 | RNVC: 2
C-MDC160002: RNCC: D | RNVC: 9

27 Dec 2019

5975-01-688-1747
Junction Box

016881747
BX448CPSM: RNCC: 3 | RNVC: 2
SYM406.1: RNCC: 5 | RNVC: 2
991412-2287: RNCC: D | RNVC: 9
930315-373: RNCC: D | RNVC: 9

6 May 2020

5975-01-689-9517
Cable Terminal Chamber

016899517
1827761: RNCC: 3 | RNVC: 2

17 Jul 2020

5975-01-689-9559
Cable Terminal Chamber

016899559
1833056: RNCC: 3 | RNVC: 2

17 Jul 2020

5975-01-650-0509
Electrical Grounding Plate

016500509
232A9115-15: RNCC: 3 | RNVC: 2

18 Nov 2015

5975-01-650-2447
Electrical Box Connector

016502447
66425: RNCC: 3 | RNVC: 2
7798K44: RNCC: 5 | RNVC: 2

24 Nov 2015

5975-01-650-3173
Electrical Components Tie Down Strap

016503173
3810305: RNCC: 1 | RNVC: 2
T255M0HIRX2: RNCC: 3 | RNVC: 2
12607694: RNCC: 3 | RNVC: 2
T255M0HIRX2: RNCC: 5 | RNVC: 2
T255M-PA66HIRHSUV-BK: RNCC: 5 | RNVC: 2
CT2252002CST: RNCC: D | RNVC: 9

28 Nov 2015

5975-01-657-4456
Electrical Conduit Adapter

016574456
M24758-3BL: RNCC: 3 | RNVC: 2

15 Aug 2016

5975-01-651-8054
Electrical-Electronic Equipment Chassis

016518054
Y6551330-A3: RNCC: 3 | RNVC: 2
Y655-1330 PNA8: RNCC: 3 | RNVC: 9
401-8483602 PNA8: RNCC: D | RNVC: 9

29 Jan 2016

5975-01-651-8409
Flexible Nonmetallic Conduit

016518409
R58HB31A70X024: RNCC: 3 | RNVC: 2
R58HB31A70X024: RNCC: 5 | RNVC: 2

1 Feb 2016

5975-01-652-3783
Electrical Cable Protector

016523783
50-107-B03T: RNCC: 1 | RNVC: 2
50-107-B03T: RNCC: 3 | RNVC: 2

19 Feb 2016

5975-01-659-0479
Stuffing Tube

016590479
CC-0010061: RNCC: 3 | RNVC: 2

1 Nov 2016

5975-01-653-3745
Strain Electrical Conductor Clamp

016533745
127-0327-017: RNCC: 3 | RNVC: 2

22 Mar 2016

5975-01-660-5826
Junction Box Gasket

016605826
3975AS4040-1: RNCC: 3 | RNVC: 2
3975AS4040-1: RNCC: 3 | RNVC: 2

25 Jan 2017

5975-01-653-0905
Electrical Equipment Rack

016530905
3228-0013-03-2: RNCC: 3 | RNVC: 1

10 Mar 2016

5975-01-654-0032
Electrical Components Tie Down Strap

016540032
SAE-AS23190: RNCC: 3 | RNVC: 1
MS3367-13-9: RNCC: 3 | RNVC: 2
MS3367-13-9: RNCC: 3 | RNVC: 9
SAE-AS33671: RNCC: 5 | RNVC: 1
SAE-AS33671: RNCC: 5 | RNVC: 9

14 Apr 2016

5975-01-664-8333
Cable Hanger

016648333
RTD6600: RNCC: 3 | RNVC: 2

7 Jul 2017

5975-01-665-6449
Electrical Components Tie Down Strap

016656449
750-DLBT: RNCC: 3 | RNVC: 9
12563965: RNCC: 7 | RNVC: 2

7 Aug 2017

5975-01-656-5334
Ic Reg Buck Sync

016565334
TPS563209DDCT: RNCC: 3 | RNVC: 2

7 Jul 2016

5975-14-544-9583
Fanning Strip

5975-21-914-2815
Electrical Cable Nipple

219142815
10556476: RNCC: 3 | RNVC: 2

25 Oct 1997

5975-25-162-0151
Cable Hanger

5975-99-959-4368
Stuffing Tube

5975-01-475-4533
Electrical Components Tie Down Strap

014754533
R105388: RNCC: 3 | RNVC: 9

5 Jun 2000

5975-01-472-0345
Strain Electrical Conductor Clamp

014720345
30-302-2D09J04: RNCC: 3 | RNVC: 2
30-302-2D09J04: RNCC: 3 | RNVC: 2
30-302-2D09J04: RNCC: 3 | RNVC: 2
30-302-2D09J04: RNCC: 3 | RNVC: 2
30-302-2D09J04: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0195
Strain Electrical Conductor Clamp

014720195
30-302-1D07G03: RNCC: 3 | RNVC: 2
30-302-1D07G03: RNCC: 5 | RNVC: 2
30-302-1D07G03: RNCC: 5 | RNVC: 2
30-302-1D07G03: RNCC: 5 | RNVC: 2
30-302-1D07G03: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-472-0783
Strain Electrical Conductor Clamp

014720783
30-302-2D04G07: RNCC: 1 | RNVC: 2
30-302-2D04G07: RNCC: 3 | RNVC: 2
30-302-2D04G07: RNCC: 3 | RNVC: 2
30-302-2D04G07: RNCC: 3 | RNVC: 2
30-302-2D04G07: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-3148
Electronic Equipment Mounting Tray

014723148
30112-01: RNCC: 3 | RNVC: 2
698009-3: RNCC: 3 | RNVC: 2

28 Feb 2000

5975-01-472-7408
Electrical Conduit Coupling

014727408
16W1195-13: RNCC: 3 | RNVC: 2
16W1195: RNCC: D | RNVC: 9

15 Mar 2000

5975-01-463-1194
Interconnecting Box

014631194
3135768: RNCC: 3 | RNVC: 2
3135768: RNCC: 5 | RNVC: 9

8 Mar 1999

5975-01-465-1567
Junction Box

014651567
11545-102: RNCC: 3 | RNVC: 2
11545-102: RNCC: 5 | RNVC: 9

24 May 1999

5975-01-465-9050
Electrical Equipment Mounting Base

014659050
404-38-S-1/DPX2-2: RNCC: 3 | RNVC: 2

25 Jun 1999

5975-01-466-4563
Electrical-Electronic Equipment Chassis

014664563
10497-1108-01: RNCC: 3 | RNVC: 2

20 Jul 1999

5975-01-469-0607
Electrical Box Connector

014690607
2270: RNCC: 3 | RNVC: 2
BS-72101: RNCC: D | RNVC: 9

2 Nov 1999

5975-01-469-5558
Electrical Cable Nipple

014695558
0298 4033: RNCC: 3 | RNVC: 2
5975PL0730638: RNCC: 6 | RNVC: 9
12460418: RNCC: D | RNVC: 9

15 Nov 1999

5975-01-471-3416
Electronic Equipment Mounting Tray

014713416
30111-01: RNCC: 3 | RNVC: 2
30111-01: RNCC: 3 | RNVC: 2
697980-3: RNCC: 3 | RNVC: 2

31 Jan 2000

5975-01-471-8453
Strain Electrical Conductor Clamp

014718453
30-302-1D03J10: RNCC: 3 | RNVC: 2
30-302-1D03J10: RNCC: 5 | RNVC: 2
30-302-1D03J10: RNCC: 5 | RNVC: 2
30-302-1D03J10: RNCC: 5 | RNVC: 2
30-302-1D03J10: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-471-8468
Strain Electrical Conductor Clamp

014718468
30-302-1D12J03: RNCC: 3 | RNVC: 2
30-302-1D12J03: RNCC: 3 | RNVC: 2
30-302-1D12J03: RNCC: 3 | RNVC: 2
30-302-1D12J03: RNCC: 7 | RNVC: 2

17 Feb 2000

5975-01-471-8697
Strain Electrical Conductor Clamp

014718697
30-302-1D03J06: RNCC: 3 | RNVC: 2
30-302-1D03J06: RNCC: 5 | RNVC: 2
30-302-1D03J06: RNCC: 5 | RNVC: 2
30-302-1D03J06: RNCC: 5 | RNVC: 2
30-302-1D03J06: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-471-8717
Electrical Equipment Mounting Base

014718717
901-370-345-501: RNCC: 3 | RNVC: 2
901-370-345-501: RNCC: 5 | RNVC: 2
901-370-345-501: RNCC: 5 | RNVC: 2
901-370-345-501: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-471-9311
Electrical Equipment Mounting Base

014719311
901-370-345-511: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0167
Strain Electrical Conductor Clamp

014720167
30-302-1D03G08: RNCC: 1 | RNVC: 2
30-302-1D03G08: RNCC: 3 | RNVC: 2
30-302-1D03G08: RNCC: 3 | RNVC: 2
30-302-1D03G08: RNCC: 3 | RNVC: 2
30-302-1D03G08: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0297
Strain Electrical Conductor Clamp

014720297
30-302-1D09G03: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0243
Strain Electrical Conductor Clamp

014720243
30-302-2D06J18: RNCC: 3 | RNVC: 2
30-302-2D06J18: RNCC: 5 | RNVC: 2
30-302-2D06J18: RNCC: 5 | RNVC: 2
30-302-2D06J18: RNCC: 5 | RNVC: 2
30-302-2D06J18: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-475-9656
Electrical Tie Down Mounting Base

014759656
TC-812: RNCC: 3 | RNVC: 2
990211-2: RNCC: 5 | RNVC: 2
990211: RNCC: D | RNVC: 9

20 Jun 2000

5975-01-476-7146
Duplex Outlet And C

014767146
5-13-6395-1: RNCC: 3 | RNVC: 2
5-13-6395: RNCC: D | RNVC: 9

20 Jul 2000

5975-01-476-7664
Electrical Equipment Mounting Base

014767664
4190-101: RNCC: 3 | RNVC: 2
4190: RNCC: D | RNVC: 9

21 Jul 2000

5975-01-477-5713
Flexible Nonmetallic Conduit

014775713
SAE-AS81914/4: RNCC: 3 | RNVC: 1
M81914/4-1003: RNCC: 3 | RNVC: 2
M81914/4-1203: RNCC: 3 | RNVC: 9
AMS-T-81914/4: RNCC: 5 | RNVC: 1
M81914/4-1203: RNCC: 5 | RNVC: 9
M81914/4-1203: RNCC: 5 | RNVC: 9
AMS-T-81914/4: RNCC: 5 | RNVC: 9

14 Aug 2000

5975-01-477-5123
Flexible Metal Conduit

014775123
4B69141-139A: RNCC: 3 | RNVC: 2
4B69141: RNCC: D | RNVC: 9

10 Aug 2000

5975-01-477-6350
Electrical Entrance Elbow

014776350
7888000031: RNCC: 3 | RNVC: 9
7888000031: RNCC: 5 | RNVC: 2

14 Aug 2000

5975-01-479-3725
Electrical-Electronic Equipment Chassis

014793725
FV29438P1: RNCC: 3 | RNVC: 2

19 Oct 2000

5975-01-480-1922
Aircr Stuffing Tube

014801922
3921384-101: RNCC: 3 | RNVC: 2

9 Nov 2000

5975-01-480-8506
Electrical Components Tie Down Strap

014808506
PLT5EH-C0: RNCC: 3 | RNVC: 2
857208-0001: RNCC: 5 | RNVC: 9
PLT5EH-0: RNCC: 5 | RNVC: 9
857208: RNCC: 7 | RNVC: 2
857208-0001: RNCC: 7 | RNVC: 2

7 Dec 2000

5975-01-481-7494
Electrical Box Connector

014817494
863-000659: RNCC: 3 | RNVC: 2
CG-2575S: RNCC: 5 | RNVC: 2
CG-2575S: RNCC: 5 | RNVC: 9

24 Jan 2001

5975-01-481-7524
Electrical Box Connector

014817524
863-000658: RNCC: 3 | RNVC: 2
CG-1850S: RNCC: 5 | RNVC: 2
CG-1850S: RNCC: 5 | RNVC: 9

24 Jan 2001

5975-01-482-8016
Electrical Grounding Plate

014828016
SK2114: RNCC: 3 | RNVC: 2

5 Mar 2001

5975-01-483-0287
Flexible Nonmetallic Conduit

014830287
8376128: RNCC: 3 | RNVC: 2
8376128: RNCC: 5 | RNVC: 2

14 Mar 2001

5975-01-484-6118
Electrical Cable Nipple

014846118
A391480200: RNCC: 3 | RNVC: 2
A39148.0200: RNCC: 5 | RNVC: 2

2 May 2001

5975-01-485-3470
Cable Hanger

014853470
12992809: RNCC: 3 | RNVC: 2

23 May 2001

5975-01-485-7953
Rigid Metal Conduit Assembly

014857953
23A02336-53: RNCC: 3 | RNVC: 2
93160181: RNCC: 5 | RNVC: 1
3260AS420: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-485-7952
Rigid Metal Conduit Assembly

014857952
23A02336-78: RNCC: 3 | RNVC: 2
93160205: RNCC: 5 | RNVC: 1
3260AS454: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-487-8478
Metallic Raceway Assembly

014878478
11686114: RNCC: 3 | RNVC: 2

21 Aug 2001

5975-01-490-4417
Electrical Conduit Elbow

014904417
420AA001N1403: RNCC: 3 | RNVC: 2

27 Sep 2001

5975-01-472-4859
Electrical Cable Protector

014724859
7030573-1: RNCC: 3 | RNVC: 2

6 Mar 2000

5975-01-472-5698
Electronic Junction Rack

014725698
CTJ-3B-02-4021: RNCC: 3 | RNVC: 2
SJT502303: RNCC: 3 | RNVC: 2
HS4778-302: RNCC: 5 | RNVC: 9
HS4778-302: RNCC: 7 | RNVC: 2

8 Mar 2000

5975-01-492-2774
Electrical Components Tie Down Strap

014922774
PLT1S-C: RNCC: 3 | RNVC: 2

20 Nov 2001

5975-01-495-4591
Metallic Raceway Assembly

014954591
96500-01055-043: RNCC: 3 | RNVC: 2

18 Mar 2002

5975-01-495-7580
Electrical Tie Down Mounting Base

014957580
CTM310C2: RNCC: 3 | RNVC: 2
CTM-310C2: RNCC: 5 | RNVC: 9

25 Mar 2002

5975-01-496-7903
Electrical Nonmetallic Conduit Assembly

014967903
R58HB08E36W018A: RNCC: 3 | RNVC: 2
R58HB08E36W018A: RNCC: 5 | RNVC: 2
R58HB08E36W018A: RNCC: 5 | RNVC: 2
R58HB08E36W018A: RNCC: 5 | RNVC: 2

26 Apr 2002

5975-01-497-0113
Ground Rod Coupling

014970113
GRC58: RNCC: 3 | RNVC: 2
99002C8008-7: RNCC: 7 | RNVC: 1
99002C8008: RNCC: D | RNVC: 9

6 May 2002

5975-01-497-2105
Electrical Components Tie Down Strap

014972105
PLF1MA-C: RNCC: 3 | RNVC: 2

13 May 2002

5975-01-497-9071
Flexible Nonmetallic Conduit

014979071
SAE-AS81914/6: RNCC: 3 | RNVC: 1
M81914/6-1007: RNCC: 3 | RNVC: 2
M81914/6-1007: RNCC: 3 | RNVC: 9
MIL-T-81914: RNCC: 5 | RNVC: 9
SAE AS81914/6: RNCC: 5 | RNVC: 9
AMS-T81914/6: RNCC: 5 | RNVC: 9
M81914/6-1007: RNCC: 5 | RNVC: 9

7 Jun 2002

5975-01-500-1773
Electrical Components Tie Down Strap

015001773
01-02694: RNCC: 3 | RNVC: 2
01-02694: RNCC: 3 | RNVC: 9
01-02694: RNCC: 5 | RNVC: 2

15 Aug 2002

5975-01-499-0496
Electrical Conduit Adapter

014990496
SE23F1805-34: RNCC: 3 | RNVC: 2
SE23: RNCC: D | RNVC: 9

11 Jul 2002

5975-01-501-4258
Ang Cable Tie Mount

015014258
CB4020G2N8: RNCC: 3 | RNVC: 2

1 Oct 2002

5975-01-501-4449
Cable Marker Sleeve

015014449
HT-SCE-1-2.0-9: RNCC: 3 | RNVC: 2

2 Oct 2002

5975-01-502-2436
Electrical Tie Down Mounting Base

015022436
CB4021G3N24: RNCC: 3 | RNVC: 2
NGM801C-G3N24: RNCC: 7 | RNVC: 9
NGM801C-G3N24: RNCC: C | RNVC: 1

29 Oct 2002

5975-01-504-5477
Electrical Equipment Mounting Base

015045477
200-85317-101: RNCC: 3 | RNVC: 2
MT6-8316-101: RNCC: 5 | RNVC: 1
247-1026-010: RNCC: 5 | RNVC: 1
247-1026: RNCC: D | RNVC: 9

31 Jan 2003

5975-01-507-7455
Electrical Equipment Drawer

015077455
7084930: RNCC: 3 | RNVC: 2
481-8216693-3: RNCC: 5 | RNVC: 2
481-8216694-A1A8: RNCC: 5 | RNVC: 2
H678-3724-3: RNCC: 5 | RNVC: 2
H678-3731-A1A8: RNCC: 5 | RNVC: 2
M130BA-1-0-0-3-1: RNCC: 5 | RNVC: 2
H678-3734-A1A8: RNCC: 5 | RNVC: 2

5 May 2003

5975-01-507-6553
Tiedo Mounting Base

015076553
CB4020G3N6: RNCC: 3 | RNVC: 2

1 May 2003

5975-01-507-8059
Rigid Metal Conduit

015078059
2112-3014: RNCC: 3 | RNVC: 9
2112-3014: RNCC: 5 | RNVC: 2
2112-3014: RNCC: 5 | RNVC: 2

6 May 2003

5975-01-508-1588
Electrical Conduit Ferrule

015081588
0409500000: RNCC: 3 | RNVC: 2
40950: RNCC: 5 | RNVC: 2

14 May 2003

5975-01-512-7786
Flexible Metal Conduit Assembly

015127786
CA00884-4A4WE3W00381: RNCC: 3 | RNVC: 2
CA00884-4A4WE3W00381: RNCC: 5 | RNVC: 9

10 Sep 2003

5975-01-512-7796
Flexible Metal Conduit Assembly

015127796
CA00884-4A4WE3W00422: RNCC: 3 | RNVC: 2
CA00884-4A4WE3W00422: RNCC: 5 | RNVC: 9

10 Sep 2003

5975-01-512-7833
Flexible Metal Conduit Assembly

015127833
CA00884-3G3WG3W01142: RNCC: 3 | RNVC: 2
CA00884-3G3WG3W01142: RNCC: 5 | RNVC: 9

10 Sep 2003

5975-01-513-7632
Spacer Front Wiper

015137632
1001081306: RNCC: 3 | RNVC: 2
D70121: RNCC: 5 | RNVC: 1
8036671: RNCC: 5 | RNVC: 9
8036671: RNCC: 5 | RNVC: 9

6 Oct 2003

5975-01-513-4462
Electrical Tie Down Mounting Base

015134462
LKCSF1-0: RNCC: 3 | RNVC: 2
2041341C1: RNCC: 5 | RNVC: 2
2041341C1: RNCC: 5 | RNVC: 9
LKCSF 1: RNCC: 5 | RNVC: 9

25 Sep 2003

5975-01-515-0548
Electrical Components Tie Down Strap

015150548
T120R0H4: RNCC: 3 | RNVC: 2
TY27MX: RNCC: 3 | RNVC: 2
127995A: RNCC: 5 | RNVC: 9
127995A: RNCC: 5 | RNVC: 9
12603148: RNCC: 7 | RNVC: 2

14 Nov 2003

5975-01-515-0619
Flexible Nonmetallic Conduit

015150619
2HA847: RNCC: 3 | RNVC: 2
2HA847: RNCC: 3 | RNVC: 9
4100033: RNCC: 5 | RNVC: 2

14 Nov 2003

5975-01-519-0722
Insulator Bracket

015190722
DG-0213-01 ITEM 5: RNCC: 3 | RNVC: 2
D-22888: RNCC: 5 | RNVC: 2

5 Apr 2004

5975-01-518-9848
Raceway Cover

015189848
382027-1: RNCC: 3 | RNVC: 2
382027-1: RNCC: 5 | RNVC: 9

31 Mar 2004

5975-01-520-5557
Cable Strain Relief Bushing

015205557
00704-0845-0001: RNCC: 3 | RNVC: 2

17 May 2004

5975-01-523-3364
Junction Box

015233364
4KP27: RNCC: 3 | RNVC: 2
SC060604: RNCC: 5 | RNVC: 9

30 Aug 2004

5975-01-523-8494
Electrical Conduit Adapter

015238494
713HL100NF15132: RNCC: 3 | RNVC: 2

16 Sep 2004

5975-01-525-1716
Cable Marker Sleeve

015251716
HS048WE1NF038: RNCC: 3 | RNVC: 2
16100531-017: RNCC: 5 | RNVC: 2
16100531-017: RNCC: 5 | RNVC: 2

29 Oct 2004

5975-01-525-7728
Cable Marker Tape

015257728
19C0531: RNCC: 3 | RNVC: 2
0209790 FIND 9: RNCC: 5 | RNVC: 2
TZES241: RNCC: 5 | RNVC: 2
TZ-S241: RNCC: 5 | RNVC: 9

23 Nov 2004

5975-01-524-9811
Electrical Components Tie Down Strap

015249811
RD-5-4137-0M: RNCC: 3 | RNVC: 2
RD-5-4137-0P: RNCC: 5 | RNVC: 9
RD-2-421: RNCC: D | RNVC: 9

25 Oct 2004

5975-01-527-4670
Flexible Nonmetallic Conduit

015274670
744VC110NFT64T24-24-4: RNCC: 3 | RNVC: 2

3 Feb 2005

5975-01-526-8970
Electrical Nonmetallic Conduit Assembly

015268970
740VC110NFN40T24-24-7: RNCC: 3 | RNVC: 2

12 Jan 2005

5975-01-527-2628
Electronic Equipment Mounting Tray

015272628
4K99006-103A: RNCC: 1 | RNVC: 2
5879885G3: RNCC: 3 | RNVC: 2

26 Jan 2005

5975-01-528-9463
Electrical-Electronic Equipment Panel

015289463
5749760-047: RNCC: 3 | RNVC: 2

30 Mar 2005

5975-01-532-2582
Flexible Metal Conduit Assembly

015322582
11477938-1: RNCC: 3 | RNVC: 2
23A02561C61C61-40E192: RNCC: 5 | RNVC: 2
759-415-1: RNCC: 5 | RNVC: 2
11477938: RNCC: 7 | RNVC: 2

3 Aug 2005

5975-01-532-2974
Strain Electrical Conductor Clamp

015322974
30-302-3D03G12: RNCC: 1 | RNVC: 2
30-302-3D03G12: RNCC: 3 | RNVC: 2
30-302-3D03G12: RNCC: 3 | RNVC: 2
30-302-3D03G12: RNCC: 3 | RNVC: 2
30-302-3D03G12: RNCC: 3 | RNVC: 2

4 Aug 2005

5975-01-533-0967
Electrical Conduit Elbow

015330967
ELMF90-100: RNCC: 3 | RNVC: 2
ELMF90-100: RNCC: 5 | RNVC: 9

31 Aug 2005

5975-01-533-9901
Stuffing Tube

015339901
6878099-1: RNCC: 1 | RNVC: 2
M19622/4-04MOD3/4: RNCC: 3 | RNVC: 2
470-6878099: RNCC: D | RNVC: 9

4 Oct 2005

5975-01-534-3345
Electrical Components Tie Down Strap

015343345
9000701-101 ITEM # 93: RNCC: 3 | RNVC: 2
94905K63: RNCC: 5 | RNVC: 2

18 Oct 2005

5975-01-534-5817
Cable Terminal Chamber

015345817
G1.5X2WH6A: RNCC: 3 | RNVC: 2
G1.5X2WH6: RNCC: 5 | RNVC: 9
36897-700: RNCC: D | RNVC: 9

26 Oct 2005

5975-01-537-0953
Flexible Metal Conduit Assembly

015370953
23A02863-37: RNCC: 3 | RNVC: 2

26 Jan 2006

5975-01-538-3922
Electrical Box Connector

015383922
773-164: RNCC: 3 | RNVC: 9
78092093280: RNCC: 5 | RNVC: 9

21 Mar 2006

5975-01-538-7844
Rigid Metal Conduit Assembly

015387844
23A02829-1: RNCC: 3 | RNVC: 2

30 Mar 2006

5975-01-540-4323
Stuffing Tube

015404323
630A007NF063H: RNCC: 3 | RNVC: 2
741414 ITEM 34: RNCC: 5 | RNVC: 2
741413 ITEM 34: RNCC: 5 | RNVC: 2
741412 ITEM 34: RNCC: 5 | RNVC: 2

18 May 2006

5975-01-543-9014
Strain Electrical Conductor Clamp

015439014
30-302-2C10G16: RNCC: 1 | RNVC: 2
30-302-2C10G16: RNCC: 3 | RNVC: 2
30-302-2C10G16: RNCC: 3 | RNVC: 2
30-302-2C10G16: RNCC: 3 | RNVC: 2
30-302-2C10G16: RNCC: 3 | RNVC: 2

25 Sep 2006

5975-01-544-7775
Tiedo Mounting Base

015447775
CB4020G5N12: RNCC: 3 | RNVC: 2

23 Oct 2006

5975-01-545-0576
Electrical-Electronic Equipment Chassis

015450576
4502202: RNCC: 3 | RNVC: 2

31 Oct 2006

5975-01-545-3411
Strain Electrical Conductor Clamp

015453411
30-302-1D03J08: RNCC: 3 | RNVC: 2
30-302-1D03J08: RNCC: 5 | RNVC: 2
30-302-1D03J08: RNCC: 5 | RNVC: 2
30-302-1D03J08: RNCC: 5 | RNVC: 2
30-302-1D03J08: RNCC: 5 | RNVC: 2

9 Nov 2006

5975-01-547-4358
Electronic Equipment Mounting Tray

015474358
235A901-1: RNCC: 3 | RNVC: 2

22 Jan 2007

5975-01-547-6700
Nonmetallic Raceway Assembly

015476700
A479980100: RNCC: 3 | RNVC: 2
A47998.0100: RNCC: 5 | RNVC: 2
CV187839: RNCC: 5 | RNVC: 2
A47998.0100: RNCC: 5 | RNVC: 2

29 Jan 2007

5975-01-548-5450
Junction Box

015485450
306-0199: RNCC: 3 | RNVC: 2

27 Feb 2007

5975-01-548-7799
Guide Rail

015487799
9080MH320: RNCC: 3 | RNVC: 9

5 Mar 2007

5975-01-549-5733
Jumper Buswork Hanger

015495733
201-8205992 ITEM NO 14: RNCC: 3 | RNVC: 2

23 Mar 2007

5975-01-549-6094
Electrical Cable Protector

015496094
12498435: RNCC: 3 | RNVC: 2

26 Mar 2007

5975-01-549-6288
Electrical Conduit Ferrule Anchor Plate

015496288
223-8205993 ITEM NO 13: RNCC: 3 | RNVC: 2

27 Mar 2007

5975-01-493-5448
Rigid Metal Conduit Assembly

014935448
23A02922-11: RNCC: 3 | RNVC: 2
23A02922: RNCC: D | RNVC: 9

9 Jan 2002

5975-01-493-2766
Mounting Strap

014932766
17-1-5523-6: RNCC: 3 | RNVC: 2
17-1-5523-6: RNCC: 5 | RNVC: 9
17-1-5523-6: RNCC: 5 | RNVC: 9
17-1-5523-6: RNCC: C | RNVC: 1

21 Dec 2001

5975-01-494-7242
Electrical Conduit Adapter

014947242
16854R3232-55-0: RNCC: 3 | RNVC: 2
16854: RNCC: D | RNVC: 9

21 Feb 2002

5975-01-485-7922
Rigid Metal Conduit Assembly

014857922
23A02336-51: RNCC: 3 | RNVC: 2
93160180: RNCC: 5 | RNVC: 1
3260AS418: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-487-5380
Electrical Cable Protector

014875380
13010048-2: RNCC: 3 | RNVC: 2
13010048: RNCC: D | RNVC: 9

9 Aug 2001

5975-01-463-6607
Flexible Metal Conduit Assembly

014636607
5909558-13: RNCC: 3 | RNVC: 2

31 Mar 1999

5975-01-464-0675
Electrical Box Connector

014640675
RJPCB-6-J-F: RNCC: 3 | RNVC: 2

15 Apr 1999

5975-01-464-2867
Flexible Metal Conduit Assembly

014642867
3260AS403: RNCC: 1 | RNVC: 2
23A02336-38: RNCC: 3 | RNVC: 2

23 Apr 1999

5975-01-468-6319
Electrical Conduit Tee

014686319
863-000803: RNCC: 3 | RNVC: 1
T50-M: RNCC: 3 | RNVC: 2

18 Oct 1999

5975-01-469-7981
Stuffing Tube Plug

014697981
WD-4011: RNCC: 3 | RNVC: 2

24 Nov 1999

5975-01-469-5460
Flexible Nonmetallic Conduit

014695460
120-001-12: RNCC: 3 | RNVC: 2
120-001: RNCC: D | RNVC: 9

15 Nov 1999

5975-01-471-8638
Strain Electrical Conductor Clamp

014718638
30-302-2D06G15: RNCC: 3 | RNVC: 2
30-302-2D06G15: RNCC: 5 | RNVC: 2
30-302-2D06G15: RNCC: 5 | RNVC: 2
30-302-2D06G15: RNCC: 5 | RNVC: 2
30-302-2D06G15: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-471-8617
Strain Electrical Conductor Clamp

014718617
30-302-2D04J15: RNCC: 3 | RNVC: 2
30-302-2D04J15: RNCC: 5 | RNVC: 2
30-302-2D04J15: RNCC: 5 | RNVC: 2
30-302-2D04J15: RNCC: 5 | RNVC: 2
30-302-2D04J15: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-471-8705
Strain Electrical Conductor Clamp

014718705
30-302-2D06J16: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0298
Strain Electrical Conductor Clamp

014720298
30-302-1D03G11: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0841
Strain Electrical Conductor Clamp

014720841
30-302-2D12G16: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-1116
Strain Electrical Conductor Clamp

014721116
30-302-2D04G08: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0213
Strain Electrical Conductor Clamp

014720213
30-302-2D04G10: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-473-3574
Junction Box Assembly

014733574
A02E2766-5: RNCC: 3 | RNVC: 2

6 Apr 2000

5975-01-474-1888
Electrical Cable Nipple

014741888
0375197: RNCC: 3 | RNVC: 2

27 Apr 2000

5975-01-478-8151
Electrical Equipment Mounting Base

014788151
BKL-4: RNCC: 3 | RNVC: 2

28 Sep 2000

5975-01-480-0068
Electrical Tie Down Mounting Base

014800068
HS5837CR3N: RNCC: 1 | RNVC: 2
CB3019CR3N: RNCC: 3 | RNVC: 2
CB3019: RNCC: D | RNVC: 9

3 Nov 2000

5975-01-480-1955
Mate Aircraft Gland

014801955
3921536-101: RNCC: 3 | RNVC: 2
3921536-101: RNCC: 3 | RNVC: 9

9 Nov 2000

5975-01-480-3196
Metallic Raceway Assembly

014803196
12416386: RNCC: 3 | RNVC: 2
12416386: RNCC: 5 | RNVC: 9

15 Nov 2000

5975-01-480-5420
Flexible Metal Conduit

014805420
12421663-002: RNCC: 3 | RNVC: 2
54020003: RNCC: 5 | RNVC: 2
12421663-002: RNCC: 5 | RNVC: 2
74115K62: RNCC: 5 | RNVC: 2
12421663: RNCC: D | RNVC: 9

27 Nov 2000

5975-01-480-6330
Electrical Box Connector

014806330
802027107404-1: RNCC: 3 | RNVC: 2
21A45138-1: RNCC: 5 | RNVC: 2
380FA010NF2409F-7A: RNCC: 5 | RNVC: 2
802027107404: RNCC: D | RNVC: 9

29 Nov 2000

5975-01-482-9629
Electrical Components Tie Down Strap

014829629
PLP2S: RNCC: 3 | RNVC: 2
PLP2S-C: RNCC: 5 | RNVC: 1
SS-26803: RNCC: D | RNVC: 9

12 Mar 2001

5975-01-483-3228
Electronic Equipment Mounting Tray

014833228
95577-5: RNCC: 3 | RNVC: 2
95577-5: RNCC: 3 | RNVC: 2
95577-5: RNCC: 5 | RNVC: 9

23 Mar 2001

5975-01-484-1150
Electrical Cable Protector

014841150
12339331: RNCC: 3 | RNVC: 2
5975PL0732956: RNCC: 6 | RNVC: 9

19 Apr 2001

5975-01-484-3219
Rigid Metal Conduit

014843219
68A780630-1001: RNCC: 3 | RNVC: 2

25 Apr 2001

5975-01-484-1286
Electrical Equipment Rack

014841286
0072991: RNCC: 3 | RNVC: 2
0072991: RNCC: D | RNVC: 9

19 Apr 2001

5975-01-484-7719
Electrical Equipment Shelf

014847719
LSCP260043: RNCC: 3 | RNVC: 2

8 May 2001

5975-01-493-2748
Mounting Strap

014932748
17-1-5523-5: RNCC: 3 | RNVC: 2
17-1-5523-5: RNCC: 5 | RNVC: 9
17-1-5523-5: RNCC: 5 | RNVC: 9
17-1-5523-5: RNCC: C | RNVC: 1

21 Dec 2001

5975-01-485-7942
Rigid Metal Conduit Assembly

014857942
23A02336-24: RNCC: 3 | RNVC: 2
93160158: RNCC: 5 | RNVC: 1
3260AS388: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-485-7943
Rigid Metal Conduit Assembly

014857943
23A02336-19: RNCC: 3 | RNVC: 2
93160154: RNCC: 5 | RNVC: 1
3260AS381: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-485-8769
Electrical Fitting Mounting Base

014858769
07197: RNCC: 3 | RNVC: 2
1000251: RNCC: 3 | RNVC: 2
540GA: RNCC: 5 | RNVC: 1
17KP737: RNCC: 5 | RNVC: 2
17KP737: RNCC: 5 | RNVC: 9
2025905: RNCC: D | RNVC: 9

11 Jun 2001

5975-01-495-2529
Electrical Equipment Mounting Base

014952529
12422696: RNCC: 3 | RNVC: 2
12422696: RNCC: 5 | RNVC: 2
12422696: RNCC: 5 | RNVC: 2

11 Mar 2002

5975-01-496-3973
Electrical Cable Assembly Protector

014963973
29529973: RNCC: 3 | RNVC: 2
10025304: RNCC: 5 | RNVC: 2
5HA261: RNCC: 5 | RNVC: 2
5HA261: RNCC: 5 | RNVC: 9

15 Apr 2002

5975-01-496-9985
Electrical-Electronic Equipment Panel

014969985
12460982: RNCC: 3 | RNVC: 2

6 May 2002

5975-01-500-1105
Electronic Equipment Mounting Tray

015001105
ASP-A761SDU-108: RNCC: 3 | RNVC: 2

13 Aug 2002

5975-01-500-4980
Electrical Conduit Adapter

015004980
6A415: RNCC: 3 | RNVC: 2

28 Aug 2002

5975-01-501-6482
Electrical Components Tie Down Strap

015016482
TY34M: RNCC: 3 | RNVC: 2
950-31593-1: RNCC: 5 | RNVC: 2
950-31593: RNCC: D | RNVC: 9

9 Oct 2002

5975-01-502-5503
Ligh Strap Assemlby

015025503
5-4-7024-1: RNCC: 3 | RNVC: 2

10 Nov 2002

5975-01-502-7336
Electrical-Electronic Equipment Chassis

015027336
713260-1: RNCC: 3 | RNVC: 2

19 Nov 2002

5975-01-502-4984
Electrical-Electronic Equipment Panel

015024984
20835-598: RNCC: 3 | RNVC: 2
844481-1: RNCC: 5 | RNVC: 2
844481-1: RNCC: 5 | RNVC: 9
844481: RNCC: D | RNVC: 9

7 Nov 2002

5975-01-506-9606
Cable Hanger

015069606
9M-17: RNCC: 3 | RNVC: 2
6512E17PN83: RNCC: D | RNVC: 9

15 Apr 2003

5975-01-507-6545
Tiedo Mounting Base

015076545
CB4019G5N750: RNCC: 3 | RNVC: 2

1 May 2003

5975-01-507-6550
Mount

015076550
CB4020G2N6: RNCC: 3 | RNVC: 2

1 May 2003

5975-01-507-9685
Electrical Components Tie Down Strap

015079685
170353: RNCC: 3 | RNVC: 2
170353: RNCC: 5 | RNVC: 2
CS PL VO 120 103: RNCC: 5 | RNVC: 2
170353: RNCC: 5 | RNVC: 9

8 May 2003

5975-01-508-7041
Electrical Conduit Adapter

015087041
S4270F2828S-34-4: RNCC: 3 | RNVC: 2
949239970-25: RNCC: 5 | RNVC: 2
S4270: RNCC: D | RNVC: 9

30 May 2003

5975-01-507-6552
Tiedo Mounting Base

015076552
CB4021G3N8: RNCC: 3 | RNVC: 2
193527052: RNCC: 5 | RNVC: 2

1 May 2003

5975-01-509-0258
Guide Rail

015090258
6ES7390-1AE80-0AA0: RNCC: 3 | RNVC: 2

10 Jun 2003

5975-01-511-5062
Electrical Nonmetallic Conduit Assembly

015115062
R58HB59H59A006: RNCC: 3 | RNVC: 2
252842: RNCC: 5 | RNVC: 9

11 Aug 2003

5975-01-511-4787
Electrical Cable Nipple

015114787
TC-600-NMH: RNCC: 3 | RNVC: 2

11 Aug 2003

5975-01-512-3607
Electrical Conduit Coupling Nut Clamp

015123607
GMA.1B.054.DN: RNCC: 3 | RNVC: 2
GMA.IB.054.DN: RNCC: 5 | RNVC: 9

28 Aug 2003

5975-01-512-7606
Flexible Metal Conduit Assembly

015127606
CA00884-6A6WB8W00532: RNCC: 3 | RNVC: 2
CA00884-6A6WB8W00532: RNCC: 5 | RNVC: 2

9 Sep 2003

5975-01-512-7603
Flexible Metal Conduit Assembly

015127603
CA00884-6A6WB7W00490: RNCC: 3 | RNVC: 2
CA00884-6A6WB7W00490: RNCC: 5 | RNVC: 2

9 Sep 2003

5975-01-514-8027
Electrical Nonmetallic Conduit Assembly

015148027
R58HB18F36W024A: RNCC: 3 | RNVC: 2
R58HB: RNCC: 5 | RNVC: 9

5 Nov 2003

5975-01-519-2831
Electrical Components Tie Down Strap

015192831
PLT-5-HL: RNCC: 3 | RNVC: 2

13 Apr 2004

5975-01-519-2771
Electrical-Electronic Equipment Chassis

015192771
12383967-1: RNCC: 3 | RNVC: 2
12383967: RNCC: D | RNVC: 9

13 Apr 2004

5975-01-520-4864
Blank Panel

015204864
660514-801: RNCC: 3 | RNVC: 2

13 May 2004

5975-01-521-7043
Strain Electrical Conductor Clamp

015217043
608-305-2: RNCC: 3 | RNVC: 9
608-305-2: RNCC: C | RNVC: 1

30 Jun 2004

5975-01-522-6473
Electrical Box Connector

015226473
3303-TB: RNCC: 3 | RNVC: 2
3303-TB: RNCC: 5 | RNVC: 9

6 Aug 2004

5975-01-523-4133
Electrical-Electronic Equipment Chassis

015234133
735353-1: RNCC: 3 | RNVC: 9
735353-1: RNCC: C | RNVC: 1
735353: RNCC: D | RNVC: 9

1 Sep 2004

5975-01-523-4302
Electrical Components Tie Down Strap

015234302
N-07-G10: RNCC: 3 | RNVC: 2
6912K54: RNCC: 5 | RNVC: 2

1 Sep 2004

5975-01-523-2766
Electrical Conduit Tee

015232766
710-108NFA32B32C32: RNCC: 3 | RNVC: 2

26 Aug 2004

5975-01-529-3280
Electrical-Electronic Equipment Panel

015293280
5749063-035: RNCC: 3 | RNVC: 2
438-5749063: RNCC: D | RNVC: 9

13 Apr 2005

5975-01-532-0371
Electrical-Electronic Equipment Chassis

015320371
DE200 SCSI 68P U160: RNCC: 3 | RNVC: 2
6176-1300-0000: RNCC: 5 | RNVC: 9
S20A108: RNCC: 5 | RNVC: 9

26 Jul 2005

5975-01-532-2984
Strain Electrical Conductor Clamp

015322984
30-302-3D11G12: RNCC: 3 | RNVC: 2

4 Aug 2005

5975-01-533-7403
Nonmetallic Raceway

015337403
A479980300: RNCC: 3 | RNVC: 2
CV187337: RNCC: 5 | RNVC: 2
A47998.0300: RNCC: 5 | RNVC: 2
A47998.0300: RNCC: 5 | RNVC: 2

26 Sep 2005

5975-01-533-6205
Conduit Outlet Cover

015336205
A-S075-SS: RNCC: 3 | RNVC: 2
A3193087-011: RNCC: 7 | RNVC: 2

21 Sep 2005

5975-01-534-1861
Electronic Equipment Mounting Tray

015341861
7450175-2: RNCC: 3 | RNVC: 2

12 Oct 2005

5975-01-538-2227
Interconnecting Cabinet

015382227
01015-000: RNCC: 3 | RNVC: 2

15 Mar 2006

5975-01-541-4223
Blank Panel

015414223
FP52A4HP: RNCC: 3 | RNVC: 2

27 Jun 2006

5975-01-541-6032
Electrical Tie Down Mounting Base

015416032
1331AS107-1: RNCC: 3 | RNVC: 2
1331AS107-1: RNCC: 7 | RNVC: 2

3 Jul 2006

5975-01-544-0679
Electrical Equipment Mounting Base

015440679
282615-1: RNCC: 3 | RNVC: 2
282615: RNCC: D | RNVC: 9

29 Sep 2006

5975-01-544-4042
Cord Assembly Fastener

015444042
STAYPUT-B: RNCC: 3 | RNVC: 9

12 Oct 2006

5975-01-545-0165
Electrical-Electronic Equipment Chassis

015450165
1001-7100: RNCC: 3 | RNVC: 2
1001-7100: RNCC: 5 | RNVC: 2

30 Oct 2006

5975-01-546-0510
Electrical Cable Protector

015460510
A495620200: RNCC: 3 | RNVC: 2
A49562.0200: RNCC: 5 | RNVC: 2
CV185382: RNCC: 5 | RNVC: 2
A49562.0200: RNCC: 5 | RNVC: 2

5 Dec 2006

5975-01-549-1865
Electrical-Electronic Equipment Chassis

015491865
A60-STIFF-1350: RNCC: 3 | RNVC: 2

14 Mar 2007

5975-01-549-5994
Electrical Equipment Mounting Base

015495994
50-9788-011: RNCC: 3 | RNVC: 2

26 Mar 2007

5975-01-549-6079
Electrical Conduit Ferrule Anchor Plate

015496079
223-8205993 ITEM NO 11: RNCC: 3 | RNVC: 2

26 Mar 2007

5975-01-550-0299
Electrical Cable Protector

015500299
222A306-1: RNCC: 3 | RNVC: 2

5 Apr 2007

5975-01-482-6997
Electrical Grounding Plate

014826997
901-011-259-101: RNCC: 3 | RNVC: 2

1 Mar 2001

5975-01-472-0241
Strain Electrical Conductor Clamp

014720241
30-302-2D06G17: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-9526
Electrical Components Tie Down Strap

014729526
214LF002: RNCC: 3 | RNVC: 2
320-396-501-0: RNCC: 5 | RNVC: 2

22 Mar 2000

5975-01-472-0853
Strain Electrical Conductor Clamp

014720853
30-302-2D17G06: RNCC: 3 | RNVC: 2
30-302-2D17G06: RNCC: 5 | RNVC: 2
30-302-2D17G06: RNCC: 5 | RNVC: 2
30-302-2D17G06: RNCC: 5 | RNVC: 2
30-302-2D17G06: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-541-1586
Electrical Cable Protector

015411586
0636-GG5-J08: RNCC: 3 | RNVC: 2
0636-GG5-J08: RNCC: 3 | RNVC: 9

16 Jun 2006

5975-01-543-6602
Electrical Equipment Mounting Base

015436602
16E3114-13: RNCC: 3 | RNVC: 2

19 Sep 2006

5975-01-543-9012
Strain Electrical Conductor Clamp

015439012
30-302-2C09G04: RNCC: 1 | RNVC: 2
30-302-2C09G04: RNCC: 3 | RNVC: 2
30-302-2C09G04: RNCC: 3 | RNVC: 2
30-302-2C09G04: RNCC: 3 | RNVC: 2
30-302-2C09G04: RNCC: 3 | RNVC: 2

25 Sep 2006

5975-01-543-7764
Aircra Wireway Tube

015437764
B93697-1: RNCC: 3 | RNVC: 2
B93697-1: RNCC: 5 | RNVC: 9

21 Sep 2006

5975-01-472-1110
Strain Electrical Conductor Clamp

014721110
30-302-1D08G03: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-462-7319
Stuffing Tube

014627319
1990.7 SIZE G TYPE 67: RNCC: 3 | RNVC: 2
9000S620274269: RNCC: 5 | RNVC: 2
9000S620274269-147: RNCC: 5 | RNVC: 2

16 Feb 1999

5975-01-464-8196
Junction Box

014648196
9325A08-3038-01: RNCC: 3 | RNVC: 2
Q13138PCE: RNCC: 5 | RNVC: 2
Q13138PCE: RNCC: 5 | RNVC: 9

11 May 1999

5975-01-469-0892
Electrical Cable Protector

014690892
CP5X125-GP-O/Y: RNCC: 3 | RNVC: 9
UG5140-YEL/ORG: RNCC: 5 | RNVC: 2
CP5-36-ED: RNCC: 5 | RNVC: 2
CP5X125-GP-O/Y: RNCC: 5 | RNVC: 9
CP5X125: RNCC: 5 | RNVC: 9
UG5140-YEL/ORG: RNCC: 5 | RNVC: 9

2 Nov 1999

5975-01-470-4780
Cable Marker Sleeve

014704780
HT-SCE-1/8-2.0-9: RNCC: 3 | RNVC: 2
HT-SCE-1/8-2.0-9: RNCC: 5 | RNVC: 1
HT-SCE: RNCC: 5 | RNVC: 1

21 Dec 1999

5975-01-471-0223
Electrical Cable Nipple

014710223
727401: RNCC: 3 | RNVC: 9
727401: RNCC: 5 | RNVC: 9

20 Jan 2000

5975-01-471-8471
Strain Electrical Conductor Clamp

014718471
30-302-1D08J03: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8482
Electrical Tie Down Mounting Base

014718482
BACM14J1-1: RNCC: 3 | RNVC: 2
BACM14J1-1: RNCC: 5 | RNVC: 2
BACM14J1-1: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-471-8618
Strain Electrical Conductor Clamp

014718618
30-302-2D15J04: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-9499
Strain Electrical Conductor Clamp

014719499
30-302-2D12G05: RNCC: 3 | RNVC: 2
30-302-2D12G05: RNCC: 5 | RNVC: 2
30-302-2D12G05: RNCC: 5 | RNVC: 2
30-302-2D12G05: RNCC: 5 | RNVC: 2
30-302-2D12G05: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-472-0237
Strain Electrical Conductor Clamp

014720237
30-302-2D06G14: RNCC: 3 | RNVC: 2
30-302-2D06G14: RNCC: 3 | RNVC: 2
30-302-2D06G14: RNCC: 3 | RNVC: 2
30-302-2D06G14: RNCC: 3 | RNVC: 2
30-302-2D06G14: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0314
Strain Electrical Conductor Clamp

014720314
30-302-2D04G09: RNCC: 3 | RNVC: 2
30-302-2D04G09: RNCC: 3 | RNVC: 2
30-302-2D04G09: RNCC: 3 | RNVC: 2
30-302-2D04G09: RNCC: 3 | RNVC: 2
30-302-2D04G09: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0454
Strain Electrical Conductor Clamp

014720454
30-302-1C09J03: RNCC: 1 | RNVC: 2
30-302-1C09J03: RNCC: 3 | RNVC: 2
30-302-1C09J03: RNCC: 3 | RNVC: 2
30-302-1C09J03: RNCC: 3 | RNVC: 2
30-302-1C09J03: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0463
Strain Electrical Conductor Clamp

014720463
30-302-1C11J03: RNCC: 1 | RNVC: 2
30-302-1C11J03: RNCC: 3 | RNVC: 2
30-302-1C11J03: RNCC: 3 | RNVC: 2
30-302-1C11J03: RNCC: 3 | RNVC: 2
30-302-1C11J03: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0591
Strain Electrical Conductor Clamp

014720591
30-302-2D10G05: RNCC: 3 | RNVC: 2
30-302-2D10G05: RNCC: 5 | RNVC: 2
30-302-2D10G05: RNCC: 5 | RNVC: 2
30-302-2D10G05: RNCC: 5 | RNVC: 2
30-302-2D10G05: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-463-3650
Electrical-Electronic Equipment Panel

014633650
12387126-2: RNCC: 3 | RNVC: 2

18 Mar 1999

5975-01-485-7904
Rigid Metal Conduit Assembly

014857904
23A02336-101: RNCC: 3 | RNVC: 2
3260AS558: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-485-7915
Rigid Metal Conduit Assembly

014857915
23A02336-61: RNCC: 3 | RNVC: 2
93160189: RNCC: 5 | RNVC: 1
3260AS429: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-473-4186
Electrical-Electronic Equipment Panel

014734186
HM022-448-11: RNCC: 3 | RNVC: 2

7 Apr 2000

5975-01-475-5004
Electrical Conduit Adapter

014755004
CA011016: RNCC: 3 | RNVC: 9
50-60-0095: RNCC: 5 | RNVC: 2

6 Jun 2000

5975-01-475-5874
Electronic Equipment Mounting Tray

014755874
17S194-01: RNCC: 3 | RNVC: 2
17S194-01: RNCC: 5 | RNVC: 2
17S194-01: RNCC: 5 | RNVC: 2

8 Jun 2000

5975-01-476-5675
Electrical Tie Down Mounting Base

014765675
ABMM-AT-D: RNCC: 3 | RNVC: 2

17 Jul 2000

5975-01-477-1659
Electrical Cable Nipple

014771659
7172000563: RNCC: 3 | RNVC: 2

1 Aug 2000

5975-01-478-5123
Flexible Nonmetallic Conduit

014785123
120-001-24: RNCC: 3 | RNVC: 2
GS830BM7: RNCC: 5 | RNVC: 1
CONVOLEX-3/4-0-SPCS5807: RNCC: 5 | RNVC: 2
RT1150 CONVOLEX .75: RNCC: 5 | RNVC: 9
RT48 CONVOLEX .75: RNCC: 5 | RNVC: 9
GS830BM: RNCC: D | RNVC: 9

15 Sep 2000

5975-01-478-8685
Guide Rail

014788685
A35486.0100: RNCC: 3 | RNVC: 2

29 Sep 2000

5975-01-479-3710
Electrical-Electronic Equipment Chassis

014793710
M1050-00229: RNCC: 3 | RNVC: 2
FK23018P1: RNCC: 5 | RNVC: 2

19 Oct 2000

5975-01-480-2517
Electrical Box Entry Flange

014802517
12421656: RNCC: 3 | RNVC: 2
12421656: RNCC: 5 | RNVC: 2
12421656: RNCC: D | RNVC: 9

13 Nov 2000

5975-01-480-2813
Junction Box Cover

014802813
0790: RNCC: 3 | RNVC: 2
A-403DSC: RNCC: 5 | RNVC: 9

14 Nov 2000

5975-01-480-2815
Electrical Box Connector

014802815
0362: RNCC: 3 | RNVC: 2
4Q-975: RNCC: 5 | RNVC: 1

14 Nov 2000

5975-01-491-7539
Electrical Components Tie Down Strap

014917539
3955T348: RNCC: 3 | RNVC: 2

31 Oct 2001

5975-01-492-6386
Electrical Tie Down Mounting Base

014926386
CB9151V5: RNCC: 3 | RNVC: 2
7087016: RNCC: 5 | RNVC: 2
AW001CL008-CM: RNCC: 5 | RNVC: 2
5975PL1856667: RNCC: 6 | RNVC: 9
5975PL2129925: RNCC: 6 | RNVC: 9
CB9151: RNCC: D | RNVC: 9

7 Dec 2001

5975-01-494-5256
Flexible Nonmetallic Conduit

014945256
B2050: RNCC: 3 | RNVC: 2
89F2833: RNCC: 5 | RNVC: 2
0212349 FIND 5: RNCC: 5 | RNVC: 2
B2050: RNCC: 5 | RNVC: 9

14 Feb 2002

5975-01-495-8568
Common Mode Choke

014958568
M2022-ALB: RNCC: 3 | RNVC: 2
M2022-A: RNCC: 3 | RNVC: 9

27 Mar 2002

5975-01-496-0334
Panel

014960334
07.0703.0279: RNCC: 3 | RNVC: 9
07.0703.0279: RNCC: 5 | RNVC: 2

29 Mar 2002

5975-01-496-5270
Electrical Cable Protector

014965270
CP5X125-GP: RNCC: 3 | RNVC: 9
UG5140-O/Y: RNCC: 5 | RNVC: 2
CP5XGP5-BB: RNCC: 5 | RNVC: 9

18 Apr 2002

5975-01-496-5274
Electrical Cable Protector

014965274
CP1X125-GP: RNCC: 3 | RNVC: 9
01290188: RNCC: 5 | RNVC: 2
CP1X125-GP: RNCC: 5 | RNVC: 9

18 Apr 2002

5975-01-496-7910
Electrical Nonmetallic Conduit Assembly

014967910
R58HA14F35X012A: RNCC: 3 | RNVC: 2
R58HA14F35X012A: RNCC: 5 | RNVC: 2
R58HA14F35X012A: RNCC: 5 | RNVC: 2
R58HA14F35X012A: RNCC: 5 | RNVC: 2

26 Apr 2002

5975-01-500-0684
Electrical Box Connector

015000684
16905B: RNCC: 3 | RNVC: 2
7119K82: RNCC: 5 | RNVC: 2
7119K82: RNCC: 5 | RNVC: 9

13 Aug 2002

5975-01-500-0690
Electrical Conduit Coupling

015000690
46685K464: RNCC: 3 | RNVC: 2

13 Aug 2002

5975-01-500-4249
Electrical Cable Nipple

015004249
600N7T02: RNCC: 3 | RNVC: 2
10656641-1: RNCC: 5 | RNVC: 2

26 Aug 2002

5975-01-503-7177
Electrical Components Tie Down Strap

015037177
8584001: RNCC: 3 | RNVC: 2
8584001: RNCC: 5 | RNVC: 9

6 Jan 2003

5975-01-504-5328
Electrical Conduit Bushing

015045328
816-3366-001: RNCC: 3 | RNVC: 2
816-3366: RNCC: D | RNVC: 9

31 Jan 2003

5975-01-505-7148
Electrical Grounding Plate

015057148
A-6529: RNCC: 3 | RNVC: 2
A-6529: RNCC: 5 | RNVC: 9
A-6529: RNCC: 5 | RNVC: 9

13 Mar 2003

5975-01-506-4998
Electronic Equipment Mounting Tray

015064998
MT6-8312-107: RNCC: 3 | RNVC: 2
MT6-8312-107: RNCC: 3 | RNVC: 9

31 Mar 2003

5975-01-507-1855
Junction Box Cover

015071855
11B254103: RNCC: 3 | RNVC: 2
Q0403L60NRB: RNCC: 5 | RNVC: 2

22 Apr 2003

5975-01-507-6542
Tiedo Mounting Base

015076542
CB4019G2N: RNCC: 3 | RNVC: 2

1 May 2003

5975-01-508-5639
Electrical-Electronic Equipment Chassis

015085639
76-35221 ITEM 9: RNCC: 3 | RNVC: 2
76-A8710-8: RNCC: 5 | RNVC: 2
76-35221: RNCC: D | RNVC: 9

27 May 2003

5975-01-509-8100
Rigid Metal Conduit Assembly

015098100
23A02863-27: RNCC: 3 | RNVC: 2
D0090054-227: RNCC: 3 | RNVC: 2

3 Jul 2003

5975-01-512-7555
Flexible Metal Conduit Assembly

015127555
CA00884-5G5WK9W00701: RNCC: 3 | RNVC: 2
CA00884-5G5WK9W00701: RNCC: 5 | RNVC: 9
BACC24D-AP00701: RNCC: D | RNVC: 9

9 Sep 2003

5975-01-512-7873
Flexible Metal Conduit Assembly

015127873
CA00884-2A2WH3N00642: RNCC: 3 | RNVC: 2
CA00884-2A2WH3N00642: RNCC: 5 | RNVC: 9

10 Sep 2003

5975-01-513-6722
Electronic Equipment Mounting Tray

015136722
12005-1922-01: RNCC: 3 | RNVC: 2

2 Oct 2003

5975-01-515-2004
Electrical Conduit Adapter

015152004
3362861: RNCC: 3 | RNVC: 2
3362861: RNCC: 3 | RNVC: 9
CF-12: RNCC: 5 | RNVC: 2

18 Nov 2003

5975-01-518-3284
Electronic Equipment Mounting Tray

015183284
7593368: RNCC: 3 | RNVC: 2
EMD0001099: RNCC: 5 | RNVC: 2
PSC0000000157: RNCC: 5 | RNVC: 9
233-500: RNCC: 5 | RNVC: 9

9 Mar 2004

5975-01-518-8281
Electrical Equipment Leg

015188281
CD-3647: RNCC: 3 | RNVC: 2
CD-3647: RNCC: 5 | RNVC: 2
3647: RNCC: 5 | RNVC: 9
D3647-3: RNCC: 5 | RNVC: 9
CD-3647: RNCC: 5 | RNVC: 9

24 Mar 2004

5975-01-527-8366
Blank Panel

015278366
1492-EB10: RNCC: 3 | RNVC: 2

18 Feb 2005

5975-01-528-4089
Flexible Nonmetallic Conduit

015284089
655493N001: RNCC: 3 | RNVC: 2
717701071-004: RNCC: 5 | RNVC: 9
717701071-004: RNCC: 5 | RNVC: 9

11 Mar 2005

5975-01-528-9449
Electrical-Electronic Equipment Panel

015289449
5749063-033: RNCC: 3 | RNVC: 2

30 Mar 2005

5975-01-529-2274
Transmission Line Grounding Set

015292274
ECLX210M: RNCC: 3 | RNVC: 2
LX210M: RNCC: 5 | RNVC: 9
ECLX210M: RNCC: 5 | RNVC: 9

8 Apr 2005

5975-01-530-0770
Electrical Conduit Coupling

015300770
CC-NPT-34-B: RNCC: 3 | RNVC: 2
H006740: RNCC: 7 | RNVC: 2

13 May 2005

5975-01-532-1402
Electrical Components Tie Down Strap

015321402
156-6175: RNCC: 3 | RNVC: 2

29 Jul 2005

5975-01-532-2922
Strain Electrical Conductor Clamp

015322922
30-302-3D26G20: RNCC: 3 | RNVC: 2

4 Aug 2005

5975-01-532-6596
Electrical Tie Down Mounting Base

015326596
ABM3H-AT-T0: RNCC: 3 | RNVC: 2
7582K13: RNCC: 5 | RNVC: 9

16 Aug 2005

5975-01-533-0476
Electrical Conductor Bushing

015330476
512-0146: RNCC: 3 | RNVC: 2
6515NAB-500 ITEM 33: RNCC: 5 | RNVC: 2

29 Aug 2005

5975-01-533-1350
Electrical-Electronic Equipment Panel

015331350
CCHA41959-1: RNCC: 3 | RNVC: 2

1 Sep 2005

5975-01-534-0068
Nonmetallic Raceway

015340068
A479990100: RNCC: 3 | RNVC: 2
A47999.0100: RNCC: 5 | RNVC: 2
CV187338: RNCC: 5 | RNVC: 2
A47999.0100: RNCC: 5 | RNVC: 2

4 Oct 2005

5975-01-534-6992
Electrical Components Tie Down Strap

015346992
T50R0C2: RNCC: 3 | RNVC: 2
VA-09-0238-03: RNCC: 5 | RNVC: 2

31 Oct 2005

5975-01-534-6602
Electrical Equipment Drawer

015346602
3654AS708-1: RNCC: 3 | RNVC: 2
3654AS708-1: RNCC: 5 | RNVC: 2
3654AS708: RNCC: D | RNVC: 9

28 Oct 2005

5975-01-536-4524
Flexible Metal Conduit Assembly

015364524
23A02863-50: RNCC: 3 | RNVC: 2

5 Jan 2006

5975-01-537-3355
Cable Marker Sleeve

015373355
HT-SCE-1K-1/2-2.0-0: RNCC: 3 | RNVC: 2

2 Feb 2006

5975-01-537-3363
Cable Marker Sleeve

015373363
SS7074-2296: RNCC: 3 | RNVC: 2

2 Feb 2006

5975-01-538-4109
Electrical Box Connector

015384109
LEVITON 2713: RNCC: 3 | RNVC: 9

21 Mar 2006

5975-01-538-6622
Cable Marker Sleeve

015386622
HM029-067-3: RNCC: 3 | RNVC: 2

28 Mar 2006

5975-01-538-7852
Rigid Metal Conduit Assembly

015387852
23A02829-2: RNCC: 3 | RNVC: 2

30 Mar 2006

5975-01-540-7683
Junction Box

015407683
A-SG4X4X4NK: RNCC: 3 | RNVC: 2
12443545: RNCC: 7 | RNVC: 2

1 Jun 2006

5975-01-541-0776
Electrical-Electronic Equipment Panel

015410776
2670-0001-09-1: RNCC: 3 | RNVC: 2
2670-0001-09-1: RNCC: 5 | RNVC: 2
2670-0001-09-1: RNCC: 5 | RNVC: 2
2670-0001-09-1: RNCC: 5 | RNVC: 2

14 Jun 2006

5975-01-540-7470
Raceway Cover

015407470
G3000CE: RNCC: 3 | RNVC: 1
12423636-004: RNCC: 5 | RNVC: 2
12423636-004: RNCC: 5 | RNVC: 2
12423636-004: RNCC: 7 | RNVC: 2
12423636: RNCC: D | RNVC: 9

1 Jun 2006

5975-01-543-9023
Electronic Equipment Mounting Tray

015439023
901-175-345-101: RNCC: 1 | RNVC: 2
901-175-345-101: RNCC: 3 | RNVC: 2

25 Sep 2006

5975-01-545-4948
Strain Electrical Conductor Clamp

015454948
30-302-1D03J16: RNCC: 3 | RNVC: 2
30-302-1D03J16: RNCC: 5 | RNVC: 2
30-302-1D03J16: RNCC: 5 | RNVC: 2
30-302-1D03J16: RNCC: 5 | RNVC: 2
30-302-1D03J16: RNCC: 5 | RNVC: 2

15 Nov 2006

5975-01-545-8803
Electrical-Electronic Equipment Chassis

015458803
30117-1301-01: RNCC: 3 | RNVC: 2

29 Nov 2006

5975-01-546-6544
Rigid Metal Conduit

015466544
005515-01: RNCC: 3 | RNVC: 2

22 Dec 2006

5975-01-546-9036
Cable Marker Sleeve

015469036
TMS-CCUV-SLEEVE-2-X-65MM: RNCC: 3 | RNVC: 2

8 Jan 2007

5975-01-549-1857
Electrical-Electronic Equipment Chassis

015491857
A60-STIFF-2250: RNCC: 3 | RNVC: 2

14 Mar 2007

5975-01-549-2444
Electrical-Electronic Equipment Chassis

015492444
A60-STFF-2250B: RNCC: 3 | RNVC: 2
A60-STIFF-2250B: RNCC: 5 | RNVC: 9

15 Mar 2007

5975-01-549-3951
Electrical Tie Down Mounting Base

015493951
276016-1: RNCC: 3 | RNVC: 2

20 Mar 2007

5975-01-549-7960
Ground Rod

015497960
86391-004: RNCC: 3 | RNVC: 2

29 Mar 2007

5975-01-482-7045
Electrical Grounding Plate

014827045
901-011-258-101: RNCC: 3 | RNVC: 2

1 Mar 2001

5975-01-464-9138
Electrical Cable Nipple

014649138
220N3V14: RNCC: 3 | RNVC: 2
9325C08-1409-05: RNCC: 5 | RNVC: 2
9325C08-1409: RNCC: D | RNVC: 9

13 May 1999

5975-01-463-6531
Flexible Metal Conduit Assembly

014636531
5909558-12: RNCC: 3 | RNVC: 2

30 Mar 1999

5975-01-466-2685
Electrical Grounding Plate

014662685
G555571-2: RNCC: 3 | RNVC: 2
G555571-2: RNCC: 5 | RNVC: 2
G555571-2: RNCC: 5 | RNVC: 9

13 Jul 1999

5975-01-466-3298
Electrical Equipment Mounting Base

014663298
94077-1: RNCC: 3 | RNVC: 2
94077-1: RNCC: 5 | RNVC: 9
94077-1: RNCC: C | RNVC: 1

15 Jul 1999

5975-01-466-8120
Junction Box

014668120
A12106NFSS: RNCC: 3 | RNVC: 2

3 Aug 1999

5975-01-467-6588
Electrical Conduit Bend

014676588
95-8081: RNCC: 3 | RNVC: 2

9 Sep 1999

5975-01-469-0529
Electrical Cable Protector

014690529
CPEC5X125: RNCC: 3 | RNVC: 9
UG5140-ED-Y: RNCC: 5 | RNVC: 2

1 Nov 1999

5975-01-469-3784
Electrical Cable Protector

014693784
50-107-B10T: RNCC: 3 | RNVC: 2
50-093-A10T: RNCC: 5 | RNVC: 9
50-107-B10T: RNCC: 5 | RNVC: 9

15 Nov 1999

5975-01-469-6586
Electrical Grounding Plate

014696586
739021-13: RNCC: 3 | RNVC: 2

18 Nov 1999

5975-01-470-3135
Electrical Components Tie Down Strap

014703135
70215K53: RNCC: 3 | RNVC: 2

15 Dec 1999

5975-01-470-2512
Electrical Conduit Adapter

014702512
6060-06-061-15: RNCC: 3 | RNVC: 2
C004AA1206A: RNCC: 5 | RNVC: 2

13 Dec 1999

5975-01-471-3494
Electrical Tie Down Mounting Base

014713494
HS6005G3N12: RNCC: 3 | RNVC: 2
CB4020G3N12: RNCC: 5 | RNVC: 2
HS6005: RNCC: D | RNVC: 9

1 Feb 2000

5975-01-471-8480
Strain Electrical Conductor Clamp

014718480
30-302-2D06J17: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8573
Strain Electrical Conductor Clamp

014718573
30-302-2D04J16: RNCC: 3 | RNVC: 2
30-302-2D04J16: RNCC: 5 | RNVC: 2
30-302-2D04J16: RNCC: 5 | RNVC: 2
30-302-2D04J16: RNCC: 5 | RNVC: 2
30-302-2D04J16: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-471-8716
Strain Electrical Conductor Clamp

014718716
30-302-3D16G16: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-471-8841
Strain Electrical Conductor Clamp

014718841
30-302-3D10G10: RNCC: 3 | RNVC: 2
BACC10KP3D1010N: RNCC: 5 | RNVC: 9

17 Feb 2000

5975-01-471-9491
Strain Electrical Conductor Clamp

014719491
30-302-2D07G06: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0180
Strain Electrical Conductor Clamp

014720180
30-302-2D06G08: RNCC: 1 | RNVC: 2
30-302-2D06G08: RNCC: 3 | RNVC: 2
30-302-2D06G08: RNCC: 3 | RNVC: 2
30-302-2D06G08: RNCC: 3 | RNVC: 2
30-302-2D06G08: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0189
Strain Electrical Conductor Clamp

014720189
30-302-2D05G10: RNCC: 3 | RNVC: 2
30-302-2D05G10: RNCC: 5 | RNVC: 2
30-302-2D05G10: RNCC: 5 | RNVC: 2
30-302-2D05G10: RNCC: 5 | RNVC: 2
30-302-2D05G10: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-472-0201
Strain Electrical Conductor Clamp

014720201
30-302-2D10G20: RNCC: 1 | RNVC: 2
30-302-2D10G20: RNCC: 3 | RNVC: 2
30-302-2D10G20: RNCC: 3 | RNVC: 2
30-302-2D10G20: RNCC: 3 | RNVC: 2
30-302-2D10G20: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0444
Strain Electrical Conductor Clamp

014720444
30-302-1C03J11: RNCC: 3 | RNVC: 2
30-302-1C03J11: RNCC: 5 | RNVC: 2
30-302-1C03J11: RNCC: 5 | RNVC: 2
30-302-1C03J11: RNCC: 5 | RNVC: 2
30-302-1C03J11: RNCC: 5 | RNVC: 2

17 Feb 2000

5975-01-472-0843
Strain Electrical Conductor Clamp

014720843
30-302-2D16G05: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-472-0787
Strain Electrical Conductor Clamp

014720787
30-302-2D04G12: RNCC: 3 | RNVC: 2

17 Feb 2000

5975-01-473-4198
Electrical-Electronic Equipment Panel

014734198
HM022-131-11: RNCC: 3 | RNVC: 2

7 Apr 2000

5975-01-474-9253
Junction Box

014749253
6-176-100081: RNCC: 3 | RNVC: 2

17 May 2000

5975-01-477-6304
Electrical-Electronic Equipment Panel

014776304
7086002061: RNCC: 3 | RNVC: 2

14 Aug 2000

5975-01-478-5121
Flexible Nonmetallic Conduit

014785121
120-001-16: RNCC: 3 | RNVC: 2
GS830BM5: RNCC: 5 | RNVC: 1
RT1150 CONVOLEX .50: RNCC: 5 | RNVC: 2
RT48 CONVOLEX .50: RNCC: 5 | RNVC: 9
GS830BM: RNCC: D | RNVC: 9

15 Sep 2000

5975-01-480-6930
Electrical Equipment Mounting Base

014806930
RF-384VM-03: RNCC: 3 | RNVC: 2
RF-384VM-03: RNCC: 3 | RNVC: 9
RF-384VM-03: RNCC: 5 | RNVC: 2

1 Dec 2000

5975-01-480-9146
Electrical Components Tie Down Strap

014809146
PLT.6SM-C: RNCC: 3 | RNVC: 2
PLT.6SM-C: RNCC: 5 | RNVC: 2
859-0539: RNCC: 5 | RNVC: 2
1296958: RNCC: 5 | RNVC: 2
686-903-9001: RNCC: 5 | RNVC: 2

11 Dec 2000

5975-01-481-5797
Electrical Tie Down Mounting Base

014815797
TC5828: RNCC: 3 | RNVC: 2

16 Jan 2001

5975-01-481-7383
Guide Rail

014817383
A35609.0100: RNCC: 3 | RNVC: 2

23 Jan 2001

5975-01-484-2934
Electrical Box Connector

014842934
SHC-1038: RNCC: 3 | RNVC: 2
SHC-1038: RNCC: 5 | RNVC: 9

25 Apr 2001

5975-01-484-3406
Flexible Nonmetallic Conduit

014843406
POLY 1/2-BOXED-GRAY: RNCC: 3 | RNVC: 2
PLS-1/2: RNCC: 5 | RNVC: 9
160K0754-6: RNCC: C | RNVC: 1

26 Apr 2001

5975-01-484-7707
Electrical Nonmetallic Conduit Assembly

014847707
251576: RNCC: 3 | RNVC: 2
4B69141-151A: RNCC: 5 | RNVC: 2
4B69141: RNCC: D | RNVC: 9

8 May 2001

5975-01-485-7717
Rigid Metal Conduit Assembly

014857717
23A02336-40: RNCC: 3 | RNVC: 2
93160170: RNCC: 5 | RNVC: 1
3260AS405: RNCC: D | RNVC: 9

6 Jun 2001

5975-01-485-7919
Rigid Metal Conduit Assembly

014857919
3260AS426: RNCC: 3 | RNVC: 2
93160186: RNCC: 5 | RNVC: 2
23A02336-58: RNCC: 5 | RNVC: 9
3260AS426: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-485-7929
Rigid Metal Conduit Assembly

014857929
23A02336-91: RNCC: 3 | RNVC: 2
3260AS672: RNCC: D | RNVC: 9

7 Jun 2001

5975-01-487-8167
Metallic Raceway Assembly

014878167
12250339-2: RNCC: 3 | RNVC: 2
12250339: RNCC: D | RNVC: 9

20 Aug 2001

5975-01-487-8578
Metallic Raceway Assembly

014878578
12296434: RNCC: 3 | RNVC: 2

21 Aug 2001

5975-01-487-0396
Junction Box Cover

014870396
5101-0: RNCC: 3 | RNVC: 2
7219K3: RNCC: 5 | RNVC: 2

23 Jul 2001

5975-01-490-4409
Electrical Conduit Elbow

014904409
420AA001N2003: RNCC: 3 | RNVC: 2

27 Sep 2001

5975-01-490-7385
Electrical Conduit Adapter

014907385
SE23FM6704-34: RNCC: 3 | RNVC: 2
SE23: RNCC: D | RNVC: 9

5 Oct 2001

5975-01-493-6112
Electrical Components Tie Down Strap

014936112
8HB271: RNCC: 3 | RNVC: 2
8HB271: RNCC: 3 | RNVC: 9
580871: RNCC: 5 | RNVC: 9

11 Jan 2002

5975-01-493-6867
Electrical Equipment Drawer

014936867
160-640-1: RNCC: 3 | RNVC: 2
151-496: RNCC: 5 | RNVC: 2

15 Jan 2002

5975-01-491-3059
Stuffing Tube Adapter

014913059
22065-407: RNCC: 3 | RNVC: 2
22065: RNCC: D | RNVC: 9

17 Oct 2001

5975-01-494-9704
Electrical Cable Nipple

014949704
216E2V02: RNCC: 3 | RNVC: 2
12422733-002: RNCC: 3 | RNVC: 2
214EV01: RNCC: 5 | RNVC: 9
214EV01: RNCC: 5 | RNVC: 9
216E2V02: RNCC: 5 | RNVC: 9
12422733: RNCC: D | RNVC: 9

1 Mar 2002

5975-01-495-2513
Electrical Equipment Mounting Base

014952513
12422694: RNCC: 3 | RNVC: 2
12422694: RNCC: 5 | RNVC: 9

11 Mar 2002

5975-01-495-0318
Flexible Nonmetallic Conduit

014950318
SAE-AS81914/4: RNCC: 3 | RNVC: 1
M81914/4-1007: RNCC: 3 | RNVC: 2
M81914/4-1007: RNCC: 5 | RNVC: 9
M81914/4-1007: RNCC: 5 | RNVC: 9
M81914/4-1207: RNCC: 5 | RNVC: 9

5 Mar 2002

5975-01-495-2939
Electrical Conduit Adapter

014952939
711HS078NF1928-4: RNCC: 3 | RNVC: 2
711-078: RNCC: D | RNVC: 9

12 Mar 2002

5975-01-496-7921
Electrical Nonmetallic Conduit Assembly

014967921
R58HB16G51W084D: RNCC: 3 | RNVC: 1
R58HB16G51W084D: RNCC: 5 | RNVC: 1
R58HB16G51W084D: RNCC: 5 | RNVC: 1
R58HB16G51W084D: RNCC: 5 | RNVC: 9

26 Apr 2002

5975-01-497-1501
Ground Rod

014971501
S583ST: RNCC: 3 | RNVC: 2
99002C8008-6: RNCC: 7 | RNVC: 1
99002C8008: RNCC: D | RNVC: 9

10 May 2002

5975-01-499-5905
Electrical-Electronic Equipment Chassis

014995905
802025205112-1: RNCC: 3 | RNVC: 2
802025205112: RNCC: D | RNVC: 9

30 Jul 2002

5975-01-498-9406
Electrical Cable Protector

014989406
810946-1: RNCC: 3 | RNVC: 2

8 Jul 2002

5975-01-500-4756
Rigid Nonmetallic Conduit

015004756
955-145-01-CONDUIT: RNCC: 3 | RNVC: 2
955145-01: RNCC: 5 | RNVC: 9

27 Aug 2002

5975-01-500-8749
Electrical Equipment Mounting Base

015008749
10372-0870-02: RNCC: 3 | RNVC: 2
RF-5211VSM: RNCC: 5 | RNVC: 9

13 Sep 2002

5975-01-507-6546
Tiedo Mounting Base

015076546
CB4020G5N8: RNCC: 3 | RNVC: 2

1 May 2003

5975-01-499-9458
Rigid Metal Conduit

014999458
96207-03811-101: RNCC: 3 | RNVC: 2
IT-5675-101: RNCC: 5 | RNVC: 9
301181-101: RNCC: 5 | RNVC: 9
96207-03811: RNCC: D | RNVC: 9

8 Aug 2002

5975-01-509-8123
Rigid Metal Conduit Assembly

015098123
23A02863-15: RNCC: 3 | RNVC: 2

3 Jul 2003

5975-01-510-5756
Electrical Equipment Rack

015105756
6ES7-390-1AJ30-0AA0: RNCC: 3 | RNVC: 2
40358AA ITEM 30: RNCC: 5 | RNVC: 9

23 Jul 2003

Load More Results