What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 102 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 102of 491

5975-01-616-3231
Electrical Equipment Cabinet

016163231
13530275-2: RNCC: 3 | RNVC: 2
245STDD5420ZX: RNCC: 3 | RNVC: 2

8 Feb 2013

5975-01-617-0667
Electrical Equipment Cabinet

016170667
340STDD5413ZX: RNCC: 3 | RNVC: 2
13530276-6: RNCC: 7 | RNVC: 2

8 Mar 2013

5975-01-617-0682
Electrical Equipment Cabinet

016170682
340STDD5410ZX: RNCC: 3 | RNVC: 2
13530276: RNCC: 3 | RNVC: 9
13530276-4: RNCC: 7 | RNVC: 2

8 Mar 2013

5975-01-617-1080
Electrical Cable Protector

016171080
92N3677: RNCC: 3 | RNVC: 2

12 Mar 2013

5975-01-617-1085
Flexible Nonmetallic Conduit

016171085
92N3676: RNCC: 3 | RNVC: 2

12 Mar 2013

5975-01-617-1622
Stuffing Tube

016171622
AX0685-3624-SP: RNCC: 3 | RNVC: 2
AX0685-3624-SP: RNCC: 5 | RNVC: 2
LN0001021: RNCC: C | RNVC: 1

13 Mar 2013

5975-01-642-2472
Rigid Metal Conduit

016422472
16W194-15: RNCC: 3 | RNVC: 2
16W194-15: RNCC: 3 | RNVC: 9

19 Feb 2015

5975-01-617-2834
Cable Hanger

016172834
SRC4634: RNCC: 3 | RNVC: 2
SRC4634: RNCC: 3 | RNVC: 2

19 Mar 2013

5975-01-617-6714
Electrical Box Connector

016176714
297067-01: RNCC: 3 | RNVC: 2

29 Mar 2013

5975-01-619-2068
Ground Rod

016192068
029-0060-000: RNCC: 3 | RNVC: 2

21 May 2013

5975-01-644-9168
Electrical Bonding Ring

016449168
LR60: RNCC: 3 | RNVC: 2

27 May 2015

5975-01-645-0739
Tray Assembly

016450739
300785-5103-0201: RNCC: 3 | RNVC: 2

2 Jun 2015

5975-01-645-8028
Electrical Grounding Plate

016458028
775-31151-5: RNCC: 3 | RNVC: 2
775-31151: RNCC: C | RNVC: 1

29 Jun 2015

5975-01-624-3685
Electrical-Electronic Equipment Panel

016243685
807993-208: RNCC: 3 | RNVC: 2
807993-208: RNCC: 5 | RNVC: 2

27 Dec 2013

5975-01-626-2483
Junction Box Cover

016262483
Z16128CQRR: RNCC: 3 | RNVC: 2
655094: RNCC: 5 | RNVC: 2

4 Mar 2014

5975-01-628-4795
Antenna Conduit

016284795
12555302-1: RNCC: 3 | RNVC: 2
12555302: RNCC: D | RNVC: 9

28 May 2014

5975-01-629-2749
Interconnecting Box

016292749
300A403-1: RNCC: 3 | RNVC: 2
300A403-1: RNCC: 5 | RNVC: 2

24 Jun 2014

5975-01-630-7385
Electrical Equipment Mounting Base

016307385
13015741: RNCC: 3 | RNVC: 2

15 Aug 2014

5975-01-631-1480
Electrical Cable Protector

016311480
13015529: RNCC: 3 | RNVC: 2

3 Sep 2014

5975-01-630-8853
Flexible Nonmetallic Conduit

016308853
CLT62F-C20: RNCC: 3 | RNVC: 2

21 Aug 2014

5975-01-631-1488
Electrical Cable Protector

016311488
13015530-2: RNCC: 3 | RNVC: 2

3 Sep 2014

5975-01-667-4432
Wire Strand Hanger Support Strap

016674432
1300940504: RNCC: 3 | RNVC: 2
10006A0212: RNCC: 7 | RNVC: 2

17 Oct 2017

5975-01-677-6521
Electrical Fitting Mounting Base

016776521
XRFB01: RNCC: 3 | RNVC: 2

27 Dec 2018

5975-01-678-4249
Rigid Metal Conduit Assembly

016784249
2-60216-42: RNCC: 3 | RNVC: 9

6 Feb 2019

5975-01-678-6906
Mounting Plate

016786906
11-486549-007: RNCC: 3 | RNVC: 2

20 Feb 2019

5975-01-679-7608
Electrical Tie Down Mounting Base

016797608
8409-0362: RNCC: 3 | RNVC: 2
950-37443-1: RNCC: 7 | RNVC: 2

10 Apr 2019

5975-01-667-6025
Electrical-Electronic Equipment Panel

016676025
T11296: RNCC: 3 | RNVC: 2
97-1204-5-D1 ITEM 5: RNCC: 5 | RNVC: 2
97-1204-5-D6: RNCC: D | RNVC: 9

24 Oct 2017

5975-01-691-1022
Guide Rail

016911022
9265C52H03: RNCC: 3 | RNVC: 2
9265C52: RNCC: D | RNVC: 9

22 Sep 2020

5975-01-691-0709
Shop Set Installation Electrical Kit

016910709
63-2845181-1: RNCC: 3 | RNVC: 2

21 Sep 2020

5975-01-691-3703
Electrical Equipment Rack

016913703
63-2901451-1: RNCC: 3 | RNVC: 2
63-2901451: RNCC: D | RNVC: 9

6 Oct 2020

5975-01-693-3588
Rigid Metal Conduit Assembly

016933588
750EB112Z1T80T80-80-36-109D: RNCC: 3 | RNVC: 2
13599066-11: RNCC: 7 | RNVC: 2
13599066: RNCC: D | RNVC: 9

8 Feb 2021

5975-01-694-2545
Electrical Equipment Rack

016942545
505M/0084: RNCC: 3 | RNVC: 2

24 Mar 2021

5975-01-697-4142
Cable Strain Relief Bushing

016974142
S2411: RNCC: 3 | RNVC: 2

17 Sep 2021

5975-01-686-3656
Stuffing Tube

016863656
4354357: RNCC: 1 | RNVC: 2
155432: RNCC: 3 | RNVC: 2

11 Feb 2020

5975-01-686-9883
Raceway End Cap

016869883
57710P112112: RNCC: 3 | RNVC: 2

12 Mar 2020

5975-01-686-9059
Electrical-Electronic Equipment Panel

016869059
500-0031: RNCC: 3 | RNVC: 2

10 Mar 2020

5975-01-688-9975
Mounting Plate

016889975
70600-01442-101: RNCC: 3 | RNVC: 2

2 Jun 2020

5975-01-649-4051
Stuffing Tube

016494051
2AAT12252: RNCC: 3 | RNVC: 2
2AAT12252: RNCC: 3 | RNVC: 9

28 Oct 2015

5975-01-645-5390
Shield 25 Co Cable

016455390
5470/25C: RNCC: 3 | RNVC: 2

19 Jun 2015

5975-01-651-7160
Flexible Metal Conduit

016517160
80221: RNCC: 3 | RNVC: 2

27 Jan 2016

5975-01-654-9616
Stuffing Tube Plug

016549616
7845K63: RNCC: 3 | RNVC: 2
1025C11-0446: RNCC: 5 | RNVC: 2

16 May 2016

5975-01-657-2004
Dc Terminal 0.75

016572004
8897-403: RNCC: 3 | RNVC: 2

3 Aug 2016

5975-01-658-6270
Interconnecting Box

016586270
123AV93636-5: RNCC: 3 | RNVC: 2
123AV93636-5: RNCC: 5 | RNVC: 9

6 Oct 2016

5975-01-659-2330
Junction Box

016592330
12604532: RNCC: 3 | RNVC: 2
12604532: RNCC: D | RNVC: 9

10 Nov 2016

5975-01-659-8398
Stuffing Tube

016598398
16-AAE450B: RNCC: 3 | RNVC: 2
Y737-4002PN029: RNCC: 5 | RNVC: 2

19 Dec 2016

5975-01-661-9296
Electrical-Electronic Equipment Panel

016619296
A028V874: RNCC: 3 | RNVC: 2
04-20941: RNCC: 3 | RNVC: 2

21 Mar 2017

5975-01-663-3812
Flexible Nonmetallic Conduit

016633812
121-100-1-2-14BETE: RNCC: 3 | RNVC: 2
121-100-1-2-14BETE: RNCC: 5 | RNVC: 9

8 May 2017

5975-01-665-7520
Electrical-Electronic Equipment Chassis

016657520
CAP004733: RNCC: 3 | RNVC: 2
DPA004495 ITEM 3: RNCC: 5 | RNVC: 2

10 Aug 2017

5975-01-664-9732
Electrical Box Connector

016649732
AA50553-22L201S: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1

13 Jul 2017

5975-14-556-2213
Electrical Equipment Drawer

145562213
FPSS1U: RNCC: 3 | RNVC: 2
RACK-1U: RNCC: 5 | RNVC: 1

13 Feb 2008

5975-14-531-5988
Interconnecting Box

145315988
3713K027: RNCC: 3 | RNVC: 2
3713K027: RNCC: 3 | RNVC: 2

3 Sep 2002

5975-01-597-9833
Electrical Grounding Plate

015979833
7019550: RNCC: 3 | RNVC: 2

27 Jun 2011

5975-01-605-9319
Electrical Equipment Mounting Base

016059319
901-060-335-103: RNCC: 3 | RNVC: 2

1 May 2012

5975-01-602-7158
Electrical Equipment Rack

016027158
131907: RNCC: 3 | RNVC: 2

3 Feb 2012

5975-01-603-8513
Electrical Cable Protector

016038513
40810018: RNCC: 3 | RNVC: 2
40810018: RNCC: 5 | RNVC: 2

19 Mar 2012

5975-01-600-9716
Cable Marker Sleeve

016009716
VAG-VITON8.25: RNCC: 3 | RNVC: 2

4 Jan 2012

5975-01-633-4197
Electrical-Electronic Equipment Panel

016334197
11810-441: RNCC: 3 | RNVC: 2

21 Nov 2014

5975-01-617-2467
Electrical Equipment Cabinet

016172467
340STDN5412ZX: RNCC: 3 | RNVC: 2
13530276-1: RNCC: 3 | RNVC: 2

18 Mar 2013

5975-01-643-4886
Electrical Fitting Mounting Base

016434886
301-2190-001: RNCC: 3 | RNVC: 2

2 Apr 2015

5975-01-644-1435
Electrical Box Connector

016441435
NMLT907: RNCC: 3 | RNVC: 2

22 Apr 2015

5975-01-644-4943
Electrical Equipment Rack

016444943
12505987-002: RNCC: 3 | RNVC: 2
12505987-002: RNCC: 3 | RNVC: 2
12505987: RNCC: D | RNVC: 9

8 May 2015

5975-01-644-7517
Junction Box Assembly

016447517
F180253: RNCC: 3 | RNVC: 2
F160192 ITEM 18: RNCC: C | RNVC: 1

18 May 2015

5975-01-667-5450
Electrical Box Connector

016675450
50805: RNCC: 3 | RNVC: 2

20 Oct 2017

5975-01-691-0876
Junction Box

016910876
MC-001771: RNCC: 3 | RNVC: 2

21 Sep 2020

5975-01-667-9465
Electronic Equipment Mounting Tray

016679465
CAS001414: RNCC: 3 | RNVC: 2
DCA131751: RNCC: 5 | RNVC: 2
DPA004495 ITEM 10: RNCC: C | RNVC: 1

6 Nov 2017

5975-01-668-9098
Flexible Nonmetallic Conduit

016689098
12005-200: RNCC: 3 | RNVC: 2

13 Dec 2017

5975-01-669-4672
Cable Hanger

016694672
NMC1005-1: RNCC: 3 | RNVC: 1

9 Jan 2018

5975-01-669-7062
Cable Hanger

016697062
NMC1005-7: RNCC: 3 | RNVC: 1

18 Jan 2018

5975-01-655-8636
Insulator Bracket

016558636
SRC5880: RNCC: 3 | RNVC: 2
SRC5880: RNCC: D | RNVC: 9

9 Jun 2016

5975-14-549-7425
Cable Terminal Chamber

145497425
E202A009: RNCC: 3 | RNVC: 2

5 May 2006

5975-12-407-4553
Elec Tie Down Strap

5975-22-630-4364
Electrica Protector

5975-66-161-8996
Stuffing Tube

5975-01-569-6035
Flexible Metal Conduit Assembly

015696035
250015: RNCC: 3 | RNVC: 2

4 Dec 2008

5975-01-605-7165
Junction Box Cover

016057165
77441352: RNCC: 3 | RNVC: 2
24KP401: RNCC: 5 | RNVC: 2
24KP401: RNCC: 5 | RNVC: 9
99904665: RNCC: D | RNVC: 9

23 Apr 2012

5975-01-596-7422
Mounting Plate

015967422
03002A1289-1: RNCC: 3 | RNVC: 2
03002A1289: RNCC: D | RNVC: 9

24 May 2011

5975-01-597-1471
Electrical Grounding Plate

015971471
03002A1840-14: RNCC: 3 | RNVC: 2

31 May 2011

5975-01-599-4659
Cond Sealed Fitting

015994659
8403: RNCC: 3 | RNVC: 2
8403: RNCC: 5 | RNVC: 2
3891288C1: RNCC: 5 | RNVC: 2

28 Sep 2011

5975-01-599-5064
Electrical Components Tie Down Strap

015995064
0719856: RNCC: 3 | RNVC: 2
10010748: RNCC: 5 | RNVC: 2
12759-01201: RNCC: C | RNVC: 1

30 Sep 2011

5975-01-668-7964
Electrical Components Tie Down Strap

016687964
47012856: RNCC: 3 | RNVC: 2

7 Dec 2017

5975-01-673-0785
Cable Marker Sleeve

016730785
ES9516-012-8: RNCC: 3 | RNVC: 2
ES9516-012-8: RNCC: 5 | RNVC: 2
ES9516: RNCC: D | RNVC: 9

31 May 2018

5975-01-674-6501
Cable Hanger

016746501
22AAWC310400N: RNCC: 3 | RNVC: 2

6 Aug 2018

5975-01-653-6473
Cable Marker Sleeve

016536473
M6-1000-175-345-WT: RNCC: 3 | RNVC: 2
PSHT-1000-175-WT: RNCC: 5 | RNVC: 9

31 Mar 2016

5975-01-657-4303
Electrical Conduit Adapter

016574303
M24758-2DL: RNCC: 3 | RNVC: 2

12 Aug 2016

5975-01-653-9709
Electrical-Electronic Equipment Panel

016539709
200238829: RNCC: 3 | RNVC: 2

13 Apr 2016

5975-01-654-1890
Flexible Nonmetallic Conduit

016541890
0713998: RNCC: 3 | RNVC: 2
3006115: RNCC: 5 | RNVC: 2

20 Apr 2016

5975-01-654-8589
Electrical Cable Protector

016548589
CS-500: RNCC: 3 | RNVC: 2
CS-1/2: RNCC: 5 | RNVC: 2
0418C08-0395-03: RNCC: 7 | RNVC: 2

11 May 2016

5975-12-341-6897
Interconnecting Box

123416897
527 530 20 38: RNCC: 3 | RNVC: 2

16 Oct 1996

5975-12-376-7259
Electrical Equipment Mounting Base

123767259
5.801-088.0: RNCC: 3 | RNVC: 2

31 Oct 2008

5975-99-665-7760
Electrical Conduit Adapter

996657760
0483207: RNCC: 3 | RNVC: 2
137.058.50.30.7915 ITEM 7: RNCC: 5 | RNVC: 2
137.058.50.30.7915/7: RNCC: 5 | RNVC: 2

24 Sep 2002

5975-01-550-7930
Electrical Equipment Rack

015507930
A3276903: RNCC: 3 | RNVC: 2
A3276903: RNCC: 5 | RNVC: 2

30 Apr 2007

5975-01-551-8110
Cable Hanger

015518110
TYUW10303A: RNCC: 3 | RNVC: 2
8H-A33328: RNCC: D | RNVC: 9

29 May 2007

5975-01-552-8672
Electrical Nonmetallic Conduit Assembly

015528672
R58HB18H18Y018: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 9

27 Jun 2007

5975-01-553-2177
Stuffing Tube

015532177
630B008NF042F: RNCC: 3 | RNVC: 2

11 Jul 2007

5975-01-555-7719
Junction Box

015557719
70550-02413-044: RNCC: 3 | RNVC: 2

12 Sep 2007

5975-01-555-8284
Cable Collar

015558284
BB-A60-1000: RNCC: 3 | RNVC: 2

14 Sep 2007

5975-01-555-8402
Junction Box Assembly

015558402
389554: RNCC: 3 | RNVC: 2

14 Sep 2007

5975-01-555-9883
Electrical Equipment Rack Base

015559883
7185152-52: RNCC: 3 | RNVC: 2

20 Sep 2007

5975-01-556-4997
Flexible Metal Conduit

015564997
1822646C1: RNCC: 3 | RNVC: 2

3 Oct 2007

5975-01-556-7959
Electrical-Electronic Equipment Panel

015567959
724ES219-1: RNCC: 1 | RNVC: 2
95-4222-1: RNCC: 3 | RNVC: 2
0277-0358: RNCC: 3 | RNVC: 2

5 Oct 2007

5975-01-550-4090
Flexible Metal Conduit Assembly

015504090
306-0197: RNCC: 3 | RNVC: 2

18 Apr 2007

5975-01-557-0992
Flexible Nonmetallic Conduit

015570992
0713999: RNCC: 3 | RNVC: 2
4600-16: RNCC: 5 | RNVC: 9
3006116: RNCC: 7 | RNVC: 2
12759-00695: RNCC: C | RNVC: 1
S000082: RNCC: D | RNVC: 9

11 Oct 2007

5975-01-557-6312
Electrical Components Tie Down Strap

015576312
252-5933: RNCC: 3 | RNVC: 2
R0073110: RNCC: 5 | RNVC: 2
404-538: RNCC: 5 | RNVC: 9
R0073110: RNCC: 7 | RNVC: 2
R0073110-0301: RNCC: D | RNVC: 9

25 Oct 2007

5975-01-558-1802
Electrical Components Tie Down Strap

015581802
L-4-18-9-C: RNCC: 3 | RNVC: 2
12474 ITEM 53: RNCC: 5 | RNVC: 2
L-4-18-9-M: RNCC: 5 | RNVC: 9

1 Nov 2007

5975-01-559-0822
Raceway Cover

015590822
12423629-018: RNCC: 3 | RNVC: 2
12423629-018: RNCC: 5 | RNVC: 2

5 Dec 2007

5975-01-559-3093
Insulator Pin

015593093
7002749-1: RNCC: 3 | RNVC: 9

12 Dec 2007

5975-01-560-0020
Electrical Components Tie Down Strap

015600020
PLT2I-MO: RNCC: 3 | RNVC: 2
PLT21-MO: RNCC: 5 | RNVC: 9

11 Jan 2008

5975-01-561-4436
Electrical Equipment Shelf

015614436
644597: RNCC: 3 | RNVC: 2
1USHL-112: RNCC: 5 | RNVC: 9
205207-01: RNCC: 7 | RNVC: 2
205207: RNCC: D | RNVC: 9

5 Mar 2008

5975-01-562-3222
Electrical Grounding Plate

015623222
530R076G02: RNCC: 3 | RNVC: 2

3 Apr 2008

5975-01-564-4789
Electrical Box Connector

015644789
VB 2X40-CS16: RNCC: 3 | RNVC: 2

18 Jun 2008

5975-01-564-5357
Junction Box

015645357
MRP13068: RNCC: 3 | RNVC: 2
MRP13068: RNCC: 5 | RNVC: 2

19 Jun 2008

5975-01-565-5775
Cable Hanger

015655775
7652745-1: RNCC: 1 | RNVC: 2
LBP-1.5: RNCC: 3 | RNVC: 9

30 Jul 2008

5975-01-565-9336
Electrical-Electronic Equipment Chassis

015659336
1682090000: RNCC: 3 | RNVC: 2
1682090000: RNCC: 5 | RNVC: 2
7710E06P4: RNCC: 5 | RNVC: 2

13 Aug 2008

5975-01-566-2826
Electrical Cable Assembly Protector

015662826
YJ5-125: RNCC: 3 | RNVC: 9
7652471-2: RNCC: 5 | RNVC: 1
UG5140-BLK/YEL: RNCC: 5 | RNVC: 2
YJ5-125: RNCC: 5 | RNVC: 9
UG5140-BLK/YEL: RNCC: 5 | RNVC: 9

26 Aug 2008

5975-01-566-4815
Electrical Grounding Plate

015664815
25087328: RNCC: 3 | RNVC: 2
3003270: RNCC: 5 | RNVC: 9
71MR403P10: RNCC: 5 | RNVC: 9

3 Sep 2008

5975-01-566-9508
Cable Bracket

015669508
4300034: RNCC: 3 | RNVC: 2
4300034: RNCC: 5 | RNVC: 2

15 Sep 2008

5975-01-567-4124
Electrical Components Tie Down Strap

015674124
65H8802: RNCC: 3 | RNVC: 2
CBR1M-M0: RNCC: 5 | RNVC: 2
CBR1M-M0: RNCC: 5 | RNVC: 2

25 Sep 2008

5975-01-568-6077
Metallic Raceway

015686077
3688783C2: RNCC: 3 | RNVC: 2

4 Nov 2008

5975-01-568-8709
Cable Collar

015688709
10164-9: RNCC: 3 | RNVC: 2

12 Nov 2008

5975-01-577-3979
Electrical Equipment Mounting Base

015773979
3831286: RNCC: 3 | RNVC: 2
3831286: RNCC: 5 | RNVC: 9

3 Sep 2009

5975-01-579-2682
Insulation Sleeving

015792682
200038-DH20: RNCC: 3 | RNVC: 2
22A00010-0DH20: RNCC: 3 | RNVC: 2
18695: RNCC: 3 | RNVC: 2
D11000-040: RNCC: 3 | RNVC: 2
ST5M1330-20DH: RNCC: 3 | RNVC: 2
32A00001-020DH: RNCC: 3 | RNVC: 2

5 Nov 2009

5975-01-579-5122
Electrical-Electronic Equipment Panel

015795122
836-7105-001: RNCC: 3 | RNVC: 2

16 Nov 2009

5975-01-581-8884
Electrical-Electronic Equipment Chassis

015818884
SCP1830: RNCC: 3 | RNVC: 2
SCP1830: RNCC: D | RNVC: 9

1 Feb 2010

5975-01-582-3692
Electrical Tie Down Mounting Base

015823692
156-00376: RNCC: 3 | RNVC: 2
3805196: RNCC: 5 | RNVC: 2
156-00376: RNCC: 5 | RNVC: 2
12641829: RNCC: 7 | RNVC: 2
3805196: RNCC: 7 | RNVC: 9

18 Feb 2010

5975-01-582-7856
Interconnecting Box

015827856
123AV93636-1: RNCC: 3 | RNVC: 2
123AV93636-1: RNCC: 3 | RNVC: 2
123AV93636-1: RNCC: 5 | RNVC: 9

8 Mar 2010

5975-01-584-3787
Electrical Tie Down Mounting Base

015843787
HDM3120HIRC2: RNCC: 3 | RNVC: 2
HDM312: RNCC: 3 | RNVC: 2
3545571C1: RNCC: 5 | RNVC: 2
3545771C1: RNCC: 5 | RNVC: 2

23 Apr 2010

5975-01-584-8486
Electrical Equipment Rack

015848486
12485791: RNCC: 3 | RNVC: 2

7 May 2010

5975-01-584-8509
Electrical-Electronic Equipment Chassis

015848509
3401553-2: RNCC: 3 | RNVC: 2

7 May 2010

5975-01-570-9072
Stuffing Tube

015709072
R0084554: RNCC: 3 | RNVC: 2
R0084554: RNCC: 5 | RNVC: 2
R0084554-0301: RNCC: D | RNVC: 9

16 Jan 2009

5975-01-572-1230
Blank Panel

015721230
1508-43839-40: RNCC: 3 | RNVC: 2

2 Mar 2009

5975-01-572-3670
Junction Box

015723670
1604-29044-33: RNCC: 3 | RNVC: 2

9 Mar 2009

5975-01-572-7593
Electrical Components Tie Down Strap

015727593
29695T461: RNCC: 3 | RNVC: 2
4119 ITEM 1: RNCC: 5 | RNVC: 2

24 Mar 2009

5975-01-574-3933
Electrical-Electronic Equipment Chassis

015743933
FAN-MOD-4HS=: RNCC: 3 | RNVC: 2

27 May 2009

5975-01-574-6746
Electrical Equipment Mounting Base

015746746
955-41V-0002-00: RNCC: 3 | RNVC: 2

4 Jun 2009

5975-01-576-7178
Electrical Equipment Rack

015767178
12505987-001: RNCC: 3 | RNVC: 2
12505987-001: RNCC: 5 | RNVC: 2

12 Aug 2009

5975-01-591-5892
Inductor Bracket

015915892
748146-K01: RNCC: 3 | RNVC: 2

1 Feb 2011

5975-01-592-7600
Electrical-Electronic Equipment Panel

015927600
28023-320-0220/RS(A07): RNCC: 3 | RNVC: 2

18 Mar 2011

5975-01-595-3469
Flexible Nonmetallic Conduit

015953469
6291E10-ITEM19: RNCC: 3 | RNVC: 2
SM-1216-BK: RNCC: 5 | RNVC: 2

25 Apr 2011

5975-01-595-0813
Stuffing Tube

015950813
22036343: RNCC: 3 | RNVC: 2

25 Apr 2011

5975-01-595-4109
Electrical Fitting Mounting Base

015954109
CB4020G3N24-750: RNCC: 3 | RNVC: 2

26 Apr 2011

5975-01-595-3476
Electrical Conduit Adapter

015953476
6291E10-ITEM35: RNCC: 3 | RNVC: 2
ST11NA-BK: RNCC: 5 | RNVC: 2

25 Apr 2011

5975-01-596-0990
Electrical Tie Down Mounting Base

015960990
CB4020G3N12-750: RNCC: 3 | RNVC: 2

12 May 2011

5975-01-596-3799
Electrical Tie Down Mounting Base

015963799
LPM-9-C-P: RNCC: 3 | RNVC: 2
7566K29: RNCC: 5 | RNVC: 2

16 May 2011

5975-01-584-7819
Electrical Components Tie Down Strap

015847819
201540: RNCC: 3 | RNVC: 2

6 May 2010

5975-01-586-6978
Electrical Components Tie Down Strap

015866978
SAE-AS23190: RNCC: 3 | RNVC: 1
MS3367-23-0: RNCC: 3 | RNVC: 2
MS3367-23-0: RNCC: 3 | RNVC: 9

9 Jul 2010

5975-01-586-8625
Electrical Grounding Plate

015868625
3841122: RNCC: 3 | RNVC: 2
3841122: RNCC: 5 | RNVC: 9

16 Jul 2010

5975-01-586-9602
Electrical Equipment Mounting Base

015869602
4300213: RNCC: 3 | RNVC: 2
4300213: RNCC: 5 | RNVC: 2

20 Jul 2010

5975-01-587-3468
Stuffing Tube

015873468
C RS T 43: RNCC: 3 | RNVC: 2
CRST010043046: RNCC: 5 | RNVC: 2
3836237C91: RNCC: 5 | RNVC: 2
CRST010043046: RNCC: 5 | RNVC: 9

3 Aug 2010

5975-01-587-4832
Junction Box

015874832
J09F7014: RNCC: 3 | RNVC: 2
10023930: RNCC: 5 | RNVC: 2

9 Aug 2010

5975-01-588-2565
Stuffing Tube

015882565
41010907: RNCC: 3 | RNVC: 2

9 Sep 2010

5975-01-590-1040
Flexible Nonmetallic Conduit

015901040
LCP-1250-200: RNCC: 3 | RNVC: 2
3868917: RNCC: 5 | RNVC: 9
3868917: RNCC: 7 | RNVC: 2

18 Nov 2010

5975-01-590-2294
Electrical-Electronic Equipment Chassis

015902294
19182 ITEM 2: RNCC: 3 | RNVC: 2
DE/00I-CA100/B: RNCC: 5 | RNVC: 9

23 Nov 2010

5975-01-590-8329
Electrical Components Tie Down Strap

015908329
SAE-AS23190: RNCC: 3 | RNVC: 1
MS3367-9-0: RNCC: 3 | RNVC: 2
MS3367-9-0: RNCC: 3 | RNVC: 9

23 Dec 2010

5975-01-596-7355
Electrical Grounding Plate

015967355
03002A1840-22: RNCC: 3 | RNVC: 2

24 May 2011

5975-01-596-7390
Metallic Raceway Assembly

015967390
12539062: RNCC: 3 | RNVC: 2
12539062: RNCC: 5 | RNVC: 2

24 May 2011

5975-01-605-9953
Electrical-Electronic Equipment Chassis

016059953
901-005-680-101: RNCC: 3 | RNVC: 2

2 May 2012

5975-01-606-1148
Electrical Cable Nipple

016061148
B0006: RNCC: 3 | RNVC: 2

8 May 2012

5975-01-606-6133
Rigid Metal Conduit

016066133
T4G04103-101A: RNCC: 3 | RNVC: 2

22 May 2012

NSN 5975-01-606-6205 016066205 CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT

5975-01-606-6205
Electrical-Electronic Equipment Chassis

016066205
12050-3710-02: RNCC: 3 | RNVC: 2

22 May 2012

5975-01-606-6143
Rigid Metal Conduit

016066143
T4G04103-113A: RNCC: 3 | RNVC: 2

22 May 2012

5975-01-601-1308
Electrical Tie Down Mounting Base

016011308
6237138: RNCC: 3 | RNVC: 2

9 Jan 2012

5975-01-609-3575
Electrical-Electronic Equipment Chassis

016093575
779730-01: RNCC: 3 | RNVC: 2
779730-01: RNCC: 5 | RNVC: 2

24 Jul 2012

5975-01-601-8787
Electrical Box Connector

016018787
3800: RNCC: 3 | RNVC: 2

26 Jan 2012

5975-01-602-5044
Electrical Wall Plate

016025044
RCCGV: RNCC: 3 | RNVC: 2

31 Jan 2012

5975-01-603-7713
Electrical Equipment Mounting Base

016037713
08002B1120: RNCC: 3 | RNVC: 2

15 Mar 2012

5975-01-604-8103
Interconnecting Box

016048103
896230T02: RNCC: 3 | RNVC: 2
896230T01: RNCC: 5 | RNVC: 9

13 Apr 2012

5975-01-604-8312
Spec Lower Boot

016048312
120800-A00: RNCC: 3 | RNVC: 2
120283ITEM109: RNCC: 5 | RNVC: 2

13 Apr 2012

5975-01-610-4988
Electronic Equipment Mounting Tray

016104988
449-075-235-111: RNCC: 3 | RNVC: 2

20 Aug 2012

5975-01-610-5310
Electrical Entrance Elbow

016105310
901-031-332-129: RNCC: 3 | RNVC: 2

21 Aug 2012

5975-01-610-6328
Electrical-Electronic Equipment Chassis

016106328
40B160902-07: RNCC: 3 | RNVC: 2
40B160902-07: RNCC: 5 | RNVC: 2

23 Aug 2012

5975-01-610-6691
Electrical Nonmetallic Conduit Assembly

016106691
3260AS1328-29: RNCC: 1 | RNVC: 2
749-844-29: RNCC: 3 | RNVC: 2
3260AS1328: RNCC: D | RNVC: 9

24 Aug 2012

5975-01-610-6705
Electrical Nonmetallic Conduit Assembly

016106705
3260AS1328-64: RNCC: 1 | RNVC: 2
749-844-64: RNCC: 3 | RNVC: 2
3260AS1328: RNCC: D | RNVC: 9

24 Aug 2012

5975-01-610-9800
Electrical Equipment Mounting Base

016109800
168K227G03: RNCC: 3 | RNVC: 2

31 Aug 2012

5975-01-612-7877
Electrical Equipment Leg

016127877
057194-05-S: RNCC: 3 | RNVC: 2
057194-05-S: RNCC: 5 | RNVC: 9
057194 REV A: RNCC: D | RNVC: 9

20 Oct 2012

5975-01-615-0994
Electrical Wall Plate

016150994
SCP1192-3: RNCC: 3 | RNVC: 2

28 Dec 2012

5975-01-615-6672
Stuffing Tube

016156672
SEEPA-MP-5-C316L: RNCC: 3 | RNVC: 2
218344-13-17: RNCC: 7 | RNVC: 2

18 Jan 2013

5975-01-616-4378
Electrical Equipment Cabinet

016164378
340STDD5425ZX: RNCC: 3 | RNVC: 2
13530276-7: RNCC: 3 | RNVC: 2

13 Feb 2013

5975-01-616-5945
Electrical Cable Nipple

016165945
32-2900BK: RNCC: 3 | RNVC: 2
32-2900BK: RNCC: 5 | RNVC: 2

21 Feb 2013

5975-01-616-7831
Electrical Conduit Tee

016167831
RFB-1730: RNCC: 3 | RNVC: 2
03002B6004: RNCC: 7 | RNVC: 2

27 Feb 2013

5975-01-617-0683
Flexible Nonmetallic Conduit

016170683
BC261-24-100: RNCC: 3 | RNVC: 2
LN0000444: RNCC: C | RNVC: 1

8 Mar 2013

5975-01-617-2466
Electrical Equipment Cabinet

016172466
175STDD5419ZX: RNCC: 3 | RNVC: 2
13530274-6: RNCC: 3 | RNVC: 2

18 Mar 2013

5975-01-617-2472
Electrical Equipment Cabinet

016172472
340STDD5491ZX: RNCC: 3 | RNVC: 2
13530276-5: RNCC: 7 | RNVC: 2

18 Mar 2013

5975-01-618-2269
Electrical Conduit Adapter

016182269
025-08572-000: RNCC: 3 | RNVC: 2
377-17247-000 ITEM 31: RNCC: 7 | RNVC: 2
377-17247-000: RNCC: D | RNVC: 9

17 Apr 2013

5975-01-618-0369
Electrical Box Connector

016180369
76-8979: RNCC: 3 | RNVC: 2

10 Apr 2013

5975-01-642-0738
Junction Box Assembly

016420738
F179363: RNCC: 3 | RNVC: 2
F179363: RNCC: 5 | RNVC: 2

11 Feb 2015

5975-01-643-5769
Bnc Int Panel

016435769
09203109-01: RNCC: 3 | RNVC: 2
09203084-01: RNCC: 5 | RNVC: 9

7 Apr 2015

5975-01-643-8523
Rigid Nonmetallic Conduit

016438523
12578108: RNCC: 3 | RNVC: 2

14 Apr 2015

5975-01-644-7966
Electrical Conduit Bushing

016447966
223-TB: RNCC: 3 | RNVC: 2

20 May 2015

5975-01-645-9285
Electrical Tie Down Mounting Base

016459285
250-027349-10: RNCC: 3 | RNVC: 2

6 Jul 2015

5975-01-645-9139
Electrical Cable Protector

016459139
50-107-B07T: RNCC: 3 | RNVC: 2

4 Jul 2015

5975-01-647-6828
Electrical-Electronic Equipment Chassis

016476828
CAE038131: RNCC: 3 | RNVC: 2
DCA101574 ITEM 78: RNCC: C | RNVC: 1

27 Aug 2015

5975-01-647-7502
Electrical Equipment Cabinet

016477502
SCE-30H2212SSLP: RNCC: 3 | RNVC: 2
482421: RNCC: 3 | RNVC: 2

31 Aug 2015

5975-01-622-5018
Electrical Equipment Mounting Base

016225018
29214-4: RNCC: 3 | RNVC: 2
086582 REV F ITEM NO 8: RNCC: 5 | RNVC: 2
087164: RNCC: 5 | RNVC: 2
29214: RNCC: D | RNVC: 9

9 Oct 2013

5975-01-624-0275
Electrical Cable Protector

016240275
C000115401000: RNCC: 3 | RNVC: 2
BPC30034ACITEM12: RNCC: 5 | RNVC: 2

12 Dec 2013

5975-01-624-8912
Electrical Components Tie Down Strap

016248912
BACS38K10: RNCC: 1 | RNVC: 2
BACS38K10: RNCC: 3 | RNVC: 2
BACS38K10: RNCC: 3 | RNVC: 2
BACS38K: RNCC: D | RNVC: 9

17 Jan 2014

5975-01-625-3409
Conduit Chase Nipple

016253409
8402: RNCC: 3 | RNVC: 2

31 Jan 2014

5975-01-626-1175
Raceway Coupler

016261175
HBLALU3811: RNCC: 3 | RNVC: 2
11A7000492: RNCC: 5 | RNVC: 2

26 Feb 2014

5975-01-627-3183
Junction Box Assembly

016273183
3070686: RNCC: 3 | RNVC: 2
3070686: RNCC: 5 | RNVC: 9

9 Apr 2014

5975-01-628-2657
Electronic Equipment Mounting Tray

016282657
123PM99111-1: RNCC: 3 | RNVC: 2
123PM99111-1: RNCC: 5 | RNVC: 9
123PM99111-1: RNCC: 5 | RNVC: 9

16 May 2014

5975-01-630-8494
Electrical Equipment Mounting Base

016308494
13015881: RNCC: 3 | RNVC: 2

20 Aug 2014

5975-01-629-7535
Cable Strain Relief Bushing

016297535
1870: RNCC: 3 | RNVC: 2

14 Jul 2014

5975-01-667-3727
Blank Panel

016673727
252811: RNCC: 3 | RNVC: 9
MIL252811: RNCC: 5 | RNVC: 2

13 Oct 2017

5975-01-696-4933
Nonmetallic Raceway Assembly

016964933
6D33239G01: RNCC: 3 | RNVC: 2
6D33239: RNCC: D | RNVC: 9

29 Jul 2021

5975-12-323-9433
Flexible Metal Conduit Assembly

123239433
115.02.0011: RNCC: 2 | RNVC: 2
115.02.0011: RNCC: 3 | RNVC: 2

10 Jan 1991

5975-01-676-3833
Junction Box

016763833
LIWJUNCTION/BOX: RNCC: 3 | RNVC: 2

25 Oct 2018

5975-01-680-3057
Electrical Grounding Plate

016803057
10NEU125B: RNCC: 3 | RNVC: 2

29 Apr 2019

5975-01-679-5464
Electrical Fitting Mounting Base

016795464
131045-K01: RNCC: 3 | RNVC: 2
131092: RNCC: D | RNVC: 9

29 Mar 2019

5975-01-681-4490
Electrical Components Tie Down Strap

016814490
132-00009: RNCC: 3 | RNVC: 2
4084527: RNCC: 5 | RNVC: 2
12604194: RNCC: 7 | RNVC: 2
12604194: RNCC: D | RNVC: 9

18 Jun 2019

5975-01-685-5593
Cable Marker Sleeve

016855593
TMS-SCE-2X-1/8-4: RNCC: 3 | RNVC: 2
C-MDC160002: RNCC: D | RNVC: 9

27 Dec 2019

5975-01-689-9519
Cable Terminal Chamber

016899519
1827729: RNCC: 3 | RNVC: 2

17 Jul 2020

5975-01-649-9919
Electronic Equipment Mounting Tray

016499919
818-3924-420: RNCC: 3 | RNVC: 2
818-3924-420: RNCC: 5 | RNVC: 2
818-3924-420: RNCC: 5 | RNVC: 9

18 Nov 2015

5975-01-650-0543
Insulator Bracket

016500543
287A4011-47: RNCC: 3 | RNVC: 2

18 Nov 2015

5975-01-650-6011
Electrical Cable Support

016506011
13055558: RNCC: 3 | RNVC: 2

11 Dec 2015

5975-01-631-2280
Electrical-Electronic Equipment Panel

016312280
P1R18NB125CBS: RNCC: 3 | RNVC: 2
P1R18NB125CBS: RNCC: 5 | RNVC: 2

4 Sep 2014

5975-01-658-0408
Flexible Metal Conduit

016580408
M24758-A: RNCC: 3 | RNVC: 2

12 Sep 2016

5975-01-658-4563
Cable Hanger

016584563
NMC1005-4: RNCC: 3 | RNVC: 2

28 Sep 2016

5975-01-659-0478
Stuffing Tube

016590478
CC-0010059: RNCC: 3 | RNVC: 2

1 Nov 2016

5975-01-659-5715
Electrical Cable Nipple

016595715
5720B: RNCC: 3 | RNVC: 9
07011P3733-02: RNCC: 7 | RNVC: 2
07011P3733: RNCC: D | RNVC: 9

5 Dec 2016

5975-01-665-3909
Flexible Nonmetallic Conduit

016653909
507-CON-LIQ-3/8: RNCC: 3 | RNVC: 2

27 Jul 2017

5975-12-329-1919
Electrical Components Tie Down Strap

123291919
6.388-608.0: RNCC: 3 | RNVC: 2
6-388-608: RNCC: 5 | RNVC: 2
6.388-608: RNCC: 5 | RNVC: 9

22 Jul 1992

5975-12-324-4930
Stuffing Tube

123244930
184/PG21Z22: RNCC: 3 | RNVC: 2

22 Feb 1991

5975-12-354-1205
Electrical Components Tie Down Strap

123541205
TSL200S: RNCC: 3 | RNVC: 2
TYB25MX: RNCC: 3 | RNVC: 2
50358400: RNCC: 5 | RNVC: 2

6 Jun 2001

5975-14-478-8389
Electrical Box Connector

144788389
44036534: RNCC: 3 | RNVC: 2
44036534: RNCC: 5 | RNVC: 2
44036534: RNCC: 5 | RNVC: 9

23 Nov 1995

5975-20-005-7080
Cable Collar

200057080
AC86105-49: RNCC: 3 | RNVC: 2

30 Jun 2010

5975-21-914-2817
Electrical Cable Nipple

219142817
10556474: RNCC: 3 | RNVC: 2

25 Oct 1997

5975-25-160-3987
Electrical Equipment Mounting Base

251603987
41512: RNCC: 3 | RNVC: 2

15 Mar 2010

5975-99-148-0210
Electronic Equipment Mounting Tray

991480210
AP00003465-10: RNCC: 3 | RNVC: 2

10 Sep 2007

5975-12-345-7461
Elekt Gehaeuseteil

123457461
060.20.0098: RNCC: 3 | RNVC: 2

22 Apr 1998

5975-12-380-6515
Stuffing Tube

123806515
967 82 009: RNCC: 3 | RNVC: 2
6.648-246.0: RNCC: 5 | RNVC: 2

17 Nov 2009

5975-12-406-2011
Electrical Locknut

5975-14-586-0650
Quick Discon Handle

5975-99-669-7563

5975-01-679-4958
Electrical Cable Assembly Protector

016794958
A3249264: RNCC: 3 | RNVC: 2

27 Mar 2019

5975-01-681-4168
Stuffing Tube

016814168
56-9200-3: RNCC: 3 | RNVC: 2
97-3912ITEAM19: RNCC: C | RNVC: 1
97-3906ITEAM3: RNCC: C | RNVC: 1

17 Jun 2019

5975-01-667-9959
Insulator Bracket

016679959
252229: RNCC: 3 | RNVC: 9
MIL252229: RNCC: 5 | RNVC: 2

7 Nov 2017

5975-01-684-1589
Cable Marker Sleeve

016841589
TMS-SCE-2X-1/2-4: RNCC: 3 | RNVC: 2
TMS-SCE: RNCC: D | RNVC: 9

23 Oct 2019

5975-01-551-3474
Stuffing Tube

015513474
630B008NF052F: RNCC: 3 | RNVC: 2

15 May 2007

5975-01-551-7389
Cable Hanger

015517389
TYUW10305B: RNCC: 3 | RNVC: 2
8H-A35690: RNCC: D | RNVC: 9

24 May 2007

5975-01-552-6937
Ground Rod Section

015526937
T295146: RNCC: 3 | RNVC: 2
T295146: RNCC: 3 | RNVC: 9

21 Jun 2007

5975-01-552-7497
Strain Electrical Conductor Clamp

015527497
30-302-2D07G13: RNCC: 3 | RNVC: 2

22 Jun 2007

5975-01-553-0026
Electrical Nonmetallic Conduit Assembly

015530026
740NF110NFA161T09-09-12: RNCC: 3 | RNVC: 2

2 Jul 2007

5975-01-556-1827
Electrical Components Tie Down Strap

015561827
CTX48EHD-B: RNCC: 3 | RNVC: 2
40006807: RNCC: 7 | RNVC: 2

26 Sep 2007

5975-01-556-5945
Cable Hanger

015565945
3536111C1: RNCC: 3 | RNVC: 2
MT2019006CST: RNCC: 5 | RNVC: 2
3536111C1: RNCC: 5 | RNVC: 9

3 Oct 2007

5975-01-556-6996
Electrical Fitting Mounting Base

015566996
25157701: RNCC: 3 | RNVC: 2
10000270: RNCC: 5 | RNVC: 9
87RU 59M: RNCC: 5 | RNVC: 9

4 Oct 2007

5975-01-557-1106
Cable Collar

015571106
TCF075-40SS6: RNCC: 3 | RNVC: 2
1002454: RNCC: 5 | RNVC: 2
TCF075-40SS6: RNCC: 5 | RNVC: 9

11 Oct 2007

5975-01-557-1371
Electrical-Electronic Equipment Panel

015571371
0277-0383: RNCC: 3 | RNVC: 2
791ES205-1: RNCC: 3 | RNVC: 2
95-4439-1: RNCC: 3 | RNVC: 2

12 Oct 2007

5975-01-558-9831
Conduit Outlet Cover

015589831
12421497-004: RNCC: 3 | RNVC: 2

3 Dec 2007

5975-01-558-9843
Nonmetallic Raceway

015589843
12423635-005: RNCC: 3 | RNVC: 2
12423635-005: RNCC: 5 | RNVC: 9
12423635-005: RNCC: 5 | RNVC: 9
12423635-005: RNCC: 7 | RNVC: 2

3 Dec 2007

5975-01-561-6431
Metallic Raceway Assembly

015616431
29543019: RNCC: 3 | RNVC: 2
14KP604: RNCC: 5 | RNVC: 1
10025366: RNCC: 5 | RNVC: 2
29543019: RNCC: 5 | RNVC: 2
14KP604: RNCC: 5 | RNVC: 9

13 Mar 2008

5975-01-562-0533
Manp Servo Pcb Illum

015620533
13D150312-01: RNCC: 3 | RNVC: 2

27 Mar 2008

5975-01-567-0720
Conduit Outlet

015670720
T230554: RNCC: 3 | RNVC: 2

17 Sep 2008

5975-01-568-3855
Junction Box

015683855
670RAC: RNCC: 3 | RNVC: 2

29 Oct 2008

5975-01-568-6276
Vehicular Airconditioning-Heating Duct Assembly

015686276
3691323C1: RNCC: 3 | RNVC: 2
3691323C1L: RNCC: 5 | RNVC: 9

4 Nov 2008

5975-01-568-6277
Vehicular Airconditioning-Heating Duct Assembly

015686277
3691324C1: RNCC: 3 | RNVC: 2
0147120568-00: RNCC: 5 | RNVC: 9
0147120568-00: RNCC: 5 | RNVC: 9
3691324C1L: RNCC: 5 | RNVC: 9
0147120568-00: RNCC: C | RNVC: 1

4 Nov 2008

5975-01-568-8819
Junction Box

015688819
RSC080804: RNCC: 3 | RNVC: 2
RSC080804: RNCC: 5 | RNVC: 9

13 Nov 2008

5975-01-577-9762
Electrical Components Tie Down Strap

015779762
0098952: RNCC: 3 | RNVC: 2
0098952: RNCC: 5 | RNVC: 2
0098952-FH00-001: RNCC: D | RNVC: 9

23 Sep 2009

5975-01-581-0284
Aircraft Focus Lens

015810284
30123400: RNCC: 3 | RNVC: 2

4 Jan 2010

5975-01-581-2473
Conduit Outlet

015812473
03002A1733-2: RNCC: 3 | RNVC: 2

11 Jan 2010

5975-01-582-1349
Guide Rail

015821349
TS3575SL: RNCC: 3 | RNVC: 9
TS3575SL-3.5: RNCC: 5 | RNVC: 9

9 Feb 2010

5975-01-584-1411
Electrical Equipment Mounting Base

015841411
449-075-234-105: RNCC: 3 | RNVC: 2
449-075-234: RNCC: D | RNVC: 9

19 Apr 2010

5975-01-584-4606
Cable Marker Sleeve

015844606
TMS-CCUV-SLEEVE-8: RNCC: 3 | RNVC: 2
TMS-CCUV-SLEEVE-8-X-65MM: RNCC: 3 | RNVC: 2

27 Apr 2010

5975-01-562-7011
Electrical-Electronic Equipment Panel

015627011
74A800832-2011: RNCC: 3 | RNVC: 2

17 Apr 2008

5975-01-569-5934
Electrical-Electronic Equipment Panel

015695934
1182872: RNCC: 3 | RNVC: 2

4 Dec 2008

5975-01-570-0822
Junction Box Cover

015700822
A-606SC: RNCC: 3 | RNVC: 2
437-8310391 ITEM NO. 1: RNCC: 5 | RNVC: 2

16 Dec 2008

5975-01-570-9281
Electrical Components Tie Down Strap

015709281
BT1M-C0: RNCC: 3 | RNVC: 2

20 Jan 2009

5975-01-571-1583
Electrical-Electronic Equipment Panel

015711583
3380622: RNCC: 3 | RNVC: 2

26 Jan 2009

5975-01-572-5668
Electrical Cable Protector

015725668
87492342: RNCC: 3 | RNVC: 2

16 Mar 2009

5975-01-572-6932
Electrical Components Tie Down Strap

015726932
23-09796-629: RNCC: 3 | RNVC: 2

20 Mar 2009

5975-01-574-6031
Electrical Conduit Adapter

015746031
E943N: RNCC: 3 | RNVC: 9

3 Jun 2009

5975-01-575-8566
Electrical Equipment Shelf

015758566
12505276-005: RNCC: 3 | RNVC: 2
12505276: RNCC: D | RNVC: 9

15 Jul 2009

5975-01-575-9551
Stuffing Tube Packing Nut

015759551
R0079174: RNCC: 3 | RNVC: 2
R0079174: RNCC: 5 | RNVC: 2
R0079174-0301: RNCC: D | RNVC: 9

17 Jul 2009

5975-01-590-3279
Electrical Grounding Plate

015903279
934561-3: RNCC: 3 | RNVC: 2

1 Dec 2010

5975-01-593-1224
Electrical Components Tie Down Strap

015931224
63126: RNCC: 3 | RNVC: 2
24KP376: RNCC: 5 | RNVC: 2
24KP376: RNCC: 5 | RNVC: 9
10017048: RNCC: 7 | RNVC: 2
12759-01331: RNCC: C | RNVC: 1
S000193: RNCC: D | RNVC: 9

4 Apr 2011

5975-01-596-4721
Electrical Grounding Plate

015964721
1014409-1: RNCC: 3 | RNVC: 2

17 May 2011

5975-01-596-6882
Electrical Grounding Plate

015966882
03002A1840-18: RNCC: 3 | RNVC: 2

23 May 2011

5975-01-596-5460
Electrical Equipment Mounting Base

015965460
03002A1234-001: RNCC: 3 | RNVC: 2

19 May 2011

5975-01-586-0668
Electrical-Electronic Equipment Chassis

015860668
CCHA40189-3: RNCC: 3 | RNVC: 2

17 Jun 2010

5975-01-586-3364
Electrical Conduit Adapter

015863364
4FYD1: RNCC: 3 | RNVC: 2
5140110: RNCC: 5 | RNVC: 2
4FYD1: RNCC: 5 | RNVC: 9

25 Jun 2010

5975-01-586-5980
Electrical Components Tie Down Strap

015865980
2370053: RNCC: 3 | RNVC: 2

6 Jul 2010

5975-01-586-9889
Stuffing Tube

015869889
4305482: RNCC: 1 | RNVC: 2
4305482: RNCC: 3 | RNVC: 2
BAE CR100SS/9: RNCC: 3 | RNVC: 9

21 Jul 2010

5975-01-587-7532
Mounting Rail

015877532
36901418: RNCC: 3 | RNVC: 2

19 Aug 2010

5975-01-588-1690
Electrical Components Tie Down Strap

015881690
HLT3I-X0: RNCC: 3 | RNVC: 2
10492171: RNCC: 6 | RNVC: 9
SS-26938: RNCC: D | RNVC: 9

3 Sep 2010

5975-01-588-6578
Insulator Bracket Strap

015886578
12490073: RNCC: 3 | RNVC: 2

28 Sep 2010

5975-01-599-6054
Electrical Components Tie Down Strap

015996054
0098954: RNCC: 3 | RNVC: 2
0098954: RNCC: 5 | RNVC: 2
0098954-FH00-001: RNCC: D | RNVC: 9

5 Oct 2011

5975-01-597-1470
Electrical Grounding Plate

015971470
03002A1840-13: RNCC: 3 | RNVC: 2

31 May 2011

5975-01-599-9930
Electrical Components Tie Down Strap

015999930
SAE-AS23190: RNCC: 3 | RNVC: 1
MS3367-8-0: RNCC: 3 | RNVC: 2
MS3367-8-0: RNCC: 3 | RNVC: 9
AS23190: RNCC: 5 | RNVC: 1
AS33671: RNCC: 5 | RNVC: 1
MS3367-8-0: RNCC: 5 | RNVC: 9
AS23190: RNCC: 5 | RNVC: 9
AS33671: RNCC: 5 | RNVC: 9
AS3367-8-0: RNCC: E | RNVC: 8
AS3367-8-0: RNCC: E | RNVC: 8

2 Nov 2011

5975-01-602-4050
Electrical-Electronic Equipment Chassis

016024050
713724-2: RNCC: 3 | RNVC: 2

30 Jan 2012

5975-01-602-7033
Electrical Wall Plate

016027033
56418: RNCC: 3 | RNVC: 2
56416: RNCC: 5 | RNVC: 9

3 Feb 2012

5975-01-603-7055
Electrical Equipment Shelf

016037055
1USHL-139: RNCC: 3 | RNVC: 9
1USHL-139: RNCC: 5 | RNVC: 2
1USHL-139: RNCC: 5 | RNVC: 2
1300-0009: RNCC: 5 | RNVC: 9

12 Mar 2012

5975-01-606-6148
Rigid Metal Conduit

016066148
T4G04103-115A: RNCC: 3 | RNVC: 2

22 May 2012

5975-01-606-6193
Electrical Nonmetallic Conduit Assembly

016066193
CA00886-847: RNCC: 3 | RNVC: 2

22 May 2012

5975-01-607-7736
Electrical Components Tie Down Strap

016077736
SAE-AS23190: RNCC: 3 | RNVC: 1
MS3367-9-9: RNCC: 3 | RNVC: 2
MS3367-9-9: RNCC: 3 | RNVC: 9

13 Jun 2012

5975-01-607-9768
Stuffing Tube

016079768
JEL714: RNCC: 3 | RNVC: 2

19 Jun 2012

5975-01-608-4680
Electrical Components Tie Down Strap

016084680
151495: RNCC: 3 | RNVC: 2

28 Jun 2012

5975-01-608-4531
Junction Box

016084531
16241018-1: RNCC: 3 | RNVC: 2
1624 REV H FIND NO 12: RNCC: 5 | RNVC: 2

27 Jun 2012

5975-01-608-6949
Stuffing Tube

016086949
2AJG12016: RNCC: 3 | RNVC: 2
2AJG12016: RNCC: 3 | RNVC: 9

9 Jul 2012

5975-01-609-1279
Cable Marker Sleeve

016091279
13675425-3: RNCC: 3 | RNVC: 2

17 Jul 2012

5975-01-609-6071
Electrical Components Tie Down Strap

016096071
BACS38W3: RNCC: 3 | RNVC: 2

30 Jul 2012

5975-01-609-8543
Flexible Metal Conduit Assembly

016098543
4G14258-101A: RNCC: 3 | RNVC: 2

4 Aug 2012

5975-01-609-9801
Flexible Metal Conduit Assembly

016099801
3260AS1328-15: RNCC: 3 | RNVC: 2
3260AS1328-15: RNCC: 5 | RNVC: 2

7 Aug 2012

5975-01-609-9601
Flexible Metal Conduit Assembly

016099601
3260AS1328-42: RNCC: 3 | RNVC: 2

6 Aug 2012

5975-01-612-2496
Electrical Cable Protector

016122496
LCP-875-400: RNCC: 3 | RNVC: 2
LCP-875-500: RNCC: 5 | RNVC: 9

5 Oct 2012

5975-01-614-3286
Cable Marker Sleeve

016143286
HT-SCE-1K-3/16-2.0-9: RNCC: 3 | RNVC: 2

30 Nov 2012

5975-01-617-6289
Junction Box Assembly

016176289
2AJG12096: RNCC: 3 | RNVC: 2
2AJG12096: RNCC: 3 | RNVC: 9

28 Mar 2013

5975-01-618-2926
Guide Rail

016182926
1492-DR5: RNCC: 3 | RNVC: 2
1492-DR5: RNCC: 5 | RNVC: 9

18 Apr 2013

5975-01-631-3416
Electronic Equipment Mounting Tray

016313416
13015675: RNCC: 3 | RNVC: 2

10 Sep 2014

5975-01-633-9953
Electrical-Electronic Equipment Chassis

016339953
A30-0957-001: RNCC: 3 | RNVC: 2
PL01-SY-014279-007ITEM17: RNCC: C | RNVC: 1
PL01-SY-014279-007: RNCC: D | RNVC: 9

11 Dec 2014

5975-01-642-4490
Junction Box Assembly

016424490
A3141505-1: RNCC: 3 | RNVC: 2
A3141505: RNCC: D | RNVC: 9

25 Feb 2015

5975-01-643-7936
Electrical-Electronic Equipment Panel

016437936
FG27028G1: RNCC: 3 | RNVC: 2

13 Apr 2015

5975-01-644-9165
Electrical Bonding Ring

016449165
LR100: RNCC: 3 | RNVC: 2

27 May 2015

5975-01-647-2625
Mounting Plate

016472625
544749: RNCC: 3 | RNVC: 2

14 Aug 2015

5975-01-647-3469
Ground Rod

016473469
0025-0P-3344: RNCC: 3 | RNVC: 2
0025-0P-3344: RNCC: 5 | RNVC: 2
07011P3344: RNCC: 7 | RNVC: 2

19 Aug 2015

5975-01-647-6822
Electrical-Electronic Equipment Chassis

016476822
CAS000826: RNCC: 3 | RNVC: 2
DCA101574 ITEM 80: RNCC: C | RNVC: 1

27 Aug 2015

5975-01-648-4933
Junction Box

016484933
GFRST20BKBULK: RNCC: 3 | RNVC: 2
HW-N4X763SC: RNCC: 5 | RNVC: 2
HW-N4X763SC: RNCC: 5 | RNVC: 9

26 Sep 2015

5975-01-649-1452
Electrical Tie Down Mounting Base

016491452
TMBM-B: RNCC: 3 | RNVC: 2

20 Oct 2015

5975-01-620-3020
Flexible Metal Conduit

016203020
6D69482H01: RNCC: 3 | RNVC: 2
6D69279ITEM86: RNCC: 5 | RNVC: 2

16 Jul 2013

5975-01-622-3090
Conduit Outlet

016223090
IHD4-1: RNCC: 3 | RNVC: 2
11B5091456: RNCC: 7 | RNVC: 2

3 Oct 2013

5975-01-622-8940
Electrical Grounding Plate

016228940
085323: RNCC: 3 | RNVC: 2

24 Oct 2013

5975-01-624-3116
Electrical Conduit Bushing

016243116
J15B0012-1: RNCC: 3 | RNVC: 2

23 Dec 2013

5975-01-626-2420
Electrical Fitting Mounting Base

016262420
77C962413P001: RNCC: 3 | RNVC: 2

4 Mar 2014

5975-01-626-6774
Raceway Cover

016266774
11A7000494-7: RNCC: 3 | RNVC: 2
HBLALUC5: RNCC: 5 | RNVC: 2
11A7000494: RNCC: D | RNVC: 9

19 Mar 2014

5975-01-627-3074
Conduit Outlet

016273074
CBT50COM: RNCC: 3 | RNVC: 2
11A7000609: RNCC: 7 | RNVC: 2

9 Apr 2014

5975-01-627-5067
Electrical Cable Nipple

016275067
487N7V14: RNCC: 3 | RNVC: 2

16 Apr 2014

5975-01-628-7857
Mounting Plate

016287857
16-AJM272-01: RNCC: 3 | RNVC: 2

10 Jun 2014

5975-01-630-8858
Electrical Equipment Shelf

016308858
12560926: RNCC: 3 | RNVC: 2
12560926: RNCC: 5 | RNVC: 2
12560926: RNCC: D | RNVC: 9

21 Aug 2014

5975-01-690-2452
Electrical Conduit Adapter

016902452
SPC21420: RNCC: 3 | RNVC: 2
11M0615: RNCC: 5 | RNVC: 2
SPC21420: RNCC: 5 | RNVC: 2

31 Jul 2020

5975-01-692-4080
Electrical-Electronic Equipment Panel

016924080
78902-01413-041: RNCC: 3 | RNVC: 2

11 Dec 2020

5975-01-697-6052
Chassis Base

016976052
901-077-150-101: RNCC: 3 | RNVC: 2

30 Sep 2021

5975-01-681-6624
Raceway End Cap

016816624
312627: RNCC: 3 | RNVC: 2

27 Jun 2019

5975-01-683-1931
Electrical-Electronic Equipment Chassis

016831931
901-005-801-111: RNCC: 3 | RNVC: 2
PL901-005-801-111: RNCC: C | RNVC: 1
901-005-801: RNCC: D | RNVC: 9

12 Sep 2019

5975-01-687-5608
Electrical Equipment Shelf

016875608
3830300-050-101: RNCC: 3 | RNVC: 2
3830300-050-101: RNCC: 3 | RNVC: 9
3830300-050: RNCC: D | RNVC: 9

7 Apr 2020

5975-01-689-4040
Cable Spacer

016894040
92415A105: RNCC: 3 | RNVC: 2
92415A449: RNCC: 5 | RNVC: 9
31000-483: RNCC: 7 | RNVC: 2

18 Jun 2020

5975-01-689-9514
Cable Terminal Chamber

016899514
1585304: RNCC: 3 | RNVC: 2

17 Jul 2020

5975-01-669-5382
Electrical Tie Down Mounting Base

016695382
STBP19M12: RNCC: 3 | RNVC: 1

11 Jan 2018

5975-01-670-6934
Electrical Box Connector

016706934
RSR-105: RNCC: 3 | RNVC: 2
12012H2001: RNCC: 7 | RNVC: 2

1 Mar 2018

5975-12-320-6661
Flexible Nonmetallic Conduit

123206661
400.010.00: RNCC: 3 | RNVC: 2
0005461630: RNCC: 5 | RNVC: 2
404110: RNCC: 5 | RNVC: 9
000 546 16 30: RNCC: 5 | RNVC: 9

6 Feb 1990

5975-12-321-5159
Stuffing Tube

123215159
186/PG16Z8A: RNCC: 3 | RNVC: 2

28 May 1990

5975-01-651-2693
Electrical Components Tie Down Strap

016512693
13541703: RNCC: 3 | RNVC: 2

12 Jan 2016

5975-01-651-8878
Junction Box

016518878
M24142/7-001: RNCC: 2 | RNVC: 2
MIL-E-24142/7: RNCC: 4 | RNVC: 1

2 Feb 2016

5975-01-651-8294
Stuffing Tube

016518294
SHC1035SS: RNCC: 3 | RNVC: 2
9769: RNCC: 3 | RNVC: 2
A6990-000035: RNCC: 5 | RNVC: 2

1 Feb 2016

5975-01-663-9319
Blank Panel

016639319
7636122-001: RNCC: 3 | RNVC: 2
7636122: RNCC: D | RNVC: 9

30 May 2017

5975-01-664-8287
Stuffing Tube

016648287
34000D1520157: RNCC: 3 | RNVC: 2
34000D1520157: RNCC: 5 | RNVC: 2
34000D1520157: RNCC: 5 | RNVC: 2

7 Jul 2017

5975-01-653-6758
Electrical Equipment Drawer

016536758
P-6036: RNCC: 3 | RNVC: 2
13022A9003-00: RNCC: 7 | RNVC: 2
13022A1196: RNCC: D | RNVC: 9
13022A9003: RNCC: D | RNVC: 9

1 Apr 2016

5975-01-654-4046
Electrical Tie Down Mounting Base

016544046
MB2.5A10C2: RNCC: 3 | RNVC: 2

27 Apr 2016

5975-01-656-4171
Metallic Raceway

016564171
12571719: RNCC: 3 | RNVC: 2

30 Jun 2016

5975-12-371-2402
Stuffing Tube

123712402
908047156: RNCC: 3 | RNVC: 2

5 Mar 2007

5975-14-478-8364
Electrical Conduit Ferrule

144788364
44036339: RNCC: 3 | RNVC: 2
44036339: RNCC: 5 | RNVC: 2
44036339: RNCC: 5 | RNVC: 9

23 Nov 1995

5975-20-008-0906
Stuffing Tube

200080906
154-61: RNCC: 3 | RNVC: 2

7 Nov 2013

5975-33-202-4914
Cable Marker Sleeve

332024914
722421767-01: RNCC: 3 | RNVC: 2

17 Jul 2003

5975-01-591-4092
Flexible Nonmetallic Conduit

015914092
R0117263: RNCC: 3 | RNVC: 2
R0117263: RNCC: 5 | RNVC: 2
R0117263: RNCC: 5 | RNVC: 2

25 Jan 2011

5975-01-605-6359
Flexible Metal Conduit

016056359
T4G04103-107A: RNCC: 3 | RNVC: 2

23 Apr 2012

5975-01-605-6360
Flexible Metal Conduit

016056360
T4G04103-117A: RNCC: 3 | RNVC: 2

23 Apr 2012

5975-01-605-7760
Electrical Cable Protector

016057760
737306: RNCC: 3 | RNVC: 2

25 Apr 2012

5975-01-604-6193
Electrical Components Tie Down Strap

016046193
2U9D9D-32-80N7: RNCC: 3 | RNVC: 2
2U9D9D-32-80N7: RNCC: 3 | RNVC: 2
2E9D9D-32-80P80: RNCC: 5 | RNVC: 9

10 Apr 2012

5975-01-606-4178
Flexible Metal Conduit Assembly

016064178
23A02931-45: RNCC: 3 | RNVC: 2

17 May 2012

5975-01-667-3738
Electrical-Electronic Equipment Chassis

016673738
262408: RNCC: 3 | RNVC: 9
MIL262408: RNCC: 5 | RNVC: 2

13 Oct 2017

5975-01-667-5961
Electrical Conduit Adapter

016675961
M24758-5 C: RNCC: 3 | RNVC: 2
01D3173H03: RNCC: 7 | RNVC: 2

24 Oct 2017

5975-01-667-9129
Cable Marker Sleeve

016679129
01D3116H04: RNCC: 3 | RNVC: 2
3890AS003180-01-H04: RNCC: 5 | RNVC: 2
PSPT-250-1-WT: RNCC: 5 | RNVC: 2
01D3116: RNCC: D | RNVC: 9

3 Nov 2017

5975-01-681-8325
Electrical Cable Protector

016818325
8M0169564: RNCC: 3 | RNVC: 2
8M0142675: RNCC: 5 | RNVC: 9

9 Jul 2019

5975-01-668-2197
Junction Box

016682197
CSD36248: RNCC: 3 | RNVC: 2

14 Nov 2017

5975-01-668-3813
Blank Panel

016683813
226590: RNCC: 3 | RNVC: 9
MIL226590: RNCC: 5 | RNVC: 2

21 Nov 2017

5975-01-668-6557
Electrical Cable Protector

016686557
7377805: RNCC: 3 | RNVC: 2

1 Dec 2017

5975-01-669-6307
Electrical Standardized Components Case

016696307
AP-EBAG-A: RNCC: 3 | RNVC: 2
ECBMBAGA: RNCC: 5 | RNVC: 2
ECBM-BAGA: RNCC: 5 | RNVC: 9
A3349629 FIND ITEM 61: RNCC: C | RNVC: 1
A3349629: RNCC: D | RNVC: 9

17 Jan 2018

5975-01-656-6625
Ground Rod

016566625
2135.44: RNCC: 3 | RNVC: 2

13 Jul 2016

5975-01-657-4335
Electrical Conduit Adapter

016574335
M24758-5CL: RNCC: 3 | RNVC: 2
M24758-5CL: RNCC: 5 | RNVC: 9

12 Aug 2016

5975-01-652-9761
Electrical Equipment Drawer

016529761
R1291K/2L: RNCC: 3 | RNVC: 2
13022A9002-00: RNCC: 7 | RNVC: 2

9 Mar 2016

5975-01-653-9002
Electrical Equipment Leg

016539002
12007D0005-0: RNCC: 1 | RNVC: 2
10238: RNCC: 3 | RNVC: 2
12007D0005: RNCC: D | RNVC: 9

11 Apr 2016

5975-01-665-0123
Electrical Cable Splice Protector

016650123
A1-42502D-01-10: RNCC: 3 | RNVC: 2
302A821-4-0: RNCC: 5 | RNVC: 2
223-2-J: RNCC: 5 | RNVC: 2

14 Jul 2017

5975-12-345-5137
Cable Marker Sleeve

123455137
NO PRIMARY REF 12-345-5137: RNCC: 3 | RNVC: 2
405.11.0015: RNCC: 5 | RNVC: 2
2400.0: RNCC: 5 | RNVC: 9

26 Mar 1998

5975-20-006-8841
Electrical Equipment Drawer

200068841
VTA98013-02: RNCC: 3 | RNVC: 2

8 May 2012

5975-99-372-3913
Elect Mounting Base

993723913
75A787101-1005: RNCC: 3 | RNVC: 2
75A787101-1005: RNCC: 5 | RNVC: 9

21 Nov 1990

5975-99-870-0813
Bulkh Cable Gland

998700813
S/PLATE60AL: RNCC: 3 | RNVC: 2
DRAWING:S1000712: RNCC: 5 | RNVC: 1
012WY-032: RNCC: 6 | RNVC: 9

14 Nov 2001

5975-01-548-2211
Electrical-Electronic Equipment Chassis

015482211
651-0595-011: RNCC: 3 | RNVC: 2

13 Feb 2007

5975-01-552-7499
Strain Electrical Conductor Clamp

015527499
30-302-2D12G12: RNCC: 3 | RNVC: 2
30-302-2D12G12: RNCC: 5 | RNVC: 2
30-302-2D12G12: RNCC: 5 | RNVC: 2
30-302-2D12G12: RNCC: 5 | RNVC: 2
30-302-2D12G12: RNCC: 5 | RNVC: 2

22 Jun 2007

5975-01-553-8896
Electrical-Electronic Equipment Chassis

015538896
00180812: RNCC: 3 | RNVC: 2
00180812: RNCC: 5 | RNVC: 9

27 Jul 2007

5975-01-556-5464
Electrical Nonmetallic Conduit Assembly

015565464
2644081R1: RNCC: 3 | RNVC: 2
264408R1: RNCC: 5 | RNVC: 2

3 Oct 2007

5975-01-552-8221
Electrical Nonmetallic Conduit Assembly

015528221
R58HB03C34W036A: RNCC: 3 | RNVC: 2
R58HB: RNCC: 7 | RNVC: 9

26 Jun 2007

5975-01-556-6275
Electrical Components Tie Down Strap

015566275
T255ROHIRX2: RNCC: 3 | RNVC: 2
3626607C1: RNCC: 5 | RNVC: 2
3626607C1: RNCC: 5 | RNVC: 9
PT08-28991: RNCC: D | RNVC: 9

3 Oct 2007

5975-01-554-5388
Interconnecting Box

015545388
1MR2468M: RNCC: 3 | RNVC: 2
3001355: RNCC: 5 | RNVC: 2

14 Aug 2007

5975-01-556-3147
Conduit Outlet

015563147
HBL530R9W: RNCC: 3 | RNVC: 2

1 Oct 2007

5975-01-556-6719
Flexible Nonmetallic Conduit

015566719
584067C1: RNCC: 3 | RNVC: 2

3 Oct 2007

5975-01-556-7948
Junction Box

015567948
140-060XMS-05: RNCC: 3 | RNVC: 2

5 Oct 2007

5975-01-557-0991
Flexible Nonmetallic Conduit

015570991
0713997: RNCC: 3 | RNVC: 2
3006114: RNCC: 7 | RNVC: 2
12759-00694: RNCC: C | RNVC: 1
S000082: RNCC: D | RNVC: 9

11 Oct 2007

5975-01-557-1905
Electrical Wall Plate

015571905
A3188274: RNCC: 3 | RNVC: 2

16 Oct 2007

5975-01-557-2619
Electrical Components Tie Down Strap

015572619
AL-08-40-9-CL: RNCC: 3 | RNVC: 2
05389861: RNCC: 5 | RNVC: 2

17 Oct 2007

5975-01-557-4046
Rigid Metal Conduit

015574046
31169-1483: RNCC: 3 | RNVC: 2

22 Oct 2007

5975-01-557-5995
Stuffing Tube

015575995
053501-26: RNCC: 3 | RNVC: 2
R0058462: RNCC: 5 | RNVC: 2
R0058462: RNCC: 5 | RNVC: 9
R0058462: RNCC: 7 | RNVC: 2
R0058462-0302: RNCC: D | RNVC: 9

25 Oct 2007

5975-01-558-4063
Underground Cable Rack Hook

015584063
A3185047: RNCC: 3 | RNVC: 2

8 Nov 2007

5975-01-559-7112
Ground Rod

015597112
90-019-397: RNCC: 3 | RNVC: 2
611265: RNCC: 5 | RNVC: 9

3 Jan 2008

5975-01-561-1746
Junction Box

015611746
204-56387-1: RNCC: 3 | RNVC: 2

27 Feb 2008

5975-01-561-8316
Electrical Grounding Plate

015618316
8457575-30: RNCC: 3 | RNVC: 2

19 Mar 2008

5975-01-562-0516
Pcb Servo Power

015620516
13D150320-01: RNCC: 3 | RNVC: 2

27 Mar 2008

5975-01-563-7690
Electrical Tie Down Mounting Base

015637690
298-1116-ND: RNCC: 3 | RNVC: 9

21 May 2008

5975-01-564-7908
Electrical Box Connector

015647908
M4518: RNCC: 3 | RNVC: 2

27 Jun 2008

5975-01-565-6297
Electrical Components Tie Down Strap

015656297
L-36-175-9-L: RNCC: 3 | RNVC: 2

31 Jul 2008

5975-01-565-6724
Electrical Conduit Adapter

015656724
CD13AA-FE: RNCC: 3 | RNVC: 2
28-6218-4: RNCC: 5 | RNVC: 2
97-3868 REV D ITEM 7: RNCC: 5 | RNVC: 2

4 Aug 2008

5975-01-568-5221
Conduit Repair Kit

015685221
040847-01-01: RNCC: 3 | RNVC: 2
18362-RB: RNCC: 3 | RNVC: 2
13213028: RNCC: 7 | RNVC: 2

3 Nov 2008

5975-01-568-8704
Junction Box

015688704
1372498: RNCC: 3 | RNVC: 2

12 Nov 2008

5975-01-569-4398
Junction Box

015694398
JBS-100A: RNCC: 3 | RNVC: 2
1223377: RNCC: 5 | RNVC: 2
085947-000: RNCC: 5 | RNVC: 9

2 Dec 2008

5975-01-577-5262
Electrical Equipment Mounting Base

015775262
901-370-345-473: RNCC: 3 | RNVC: 2

10 Sep 2009

5975-01-579-9731
Electrical Conduit Adapter

015799731
7513K18: RNCC: 3 | RNVC: 2

1 Dec 2009

5975-01-579-9764
Electrical Components Tie Down Strap

015799764
6605K11: RNCC: 3 | RNVC: 2

1 Dec 2009

5975-01-571-3583
Electric Cable Joint Box Supplementary Equipment

015713583
AT361453: RNCC: 3 | RNVC: 2

2 Feb 2009

5975-01-572-3586
Rigid Nonmetallic Conduit

015723586
7125851: RNCC: 3 | RNVC: 2

9 Mar 2009

5975-01-576-2355
Junction Box

015762355
MB3114: RNCC: 3 | RNVC: 2

24 Jul 2009

5975-01-591-4835
Worm Wheel Assy

015914835
198725-K01: RNCC: 3 | RNVC: 2

27 Jan 2011

5975-01-591-4935
Rectifier Assy

015914935
199541-T03: RNCC: 3 | RNVC: 2

27 Jan 2011

5975-01-592-8899
Flexible Metal Conduit

015928899
8068K37: RNCC: 3 | RNVC: 2

25 Mar 2011

5975-01-595-9231
Electrical-Electronic Equipment Chassis

015959231
A3266233-2: RNCC: 3 | RNVC: 2
A3266233-2: RNCC: 3 | RNVC: 2
A3266233-2: RNCC: 5 | RNVC: 9

6 May 2011

5975-01-596-6898
Electrical Grounding Plate

015966898
03002A1840-17: RNCC: 3 | RNVC: 2

23 May 2011

5975-01-596-6912
Electrical Grounding Plate

015966912
03002A1800-7: RNCC: 3 | RNVC: 2

23 May 2011

5975-01-585-2135
Cable Terminal Chamber

015852135
191600024: RNCC: 3 | RNVC: 2

19 May 2010

5975-01-586-3356
Electrical Conduit Adapter

015863356
4FXZ2: RNCC: 3 | RNVC: 2
6141632: RNCC: 5 | RNVC: 2
4FXZ2: RNCC: 5 | RNVC: 9

25 Jun 2010

5975-01-588-0870
Electrical Equipment Mounting Base

015880870
12522263: RNCC: 3 | RNVC: 2

31 Aug 2010

5975-01-589-3650
Junction Box

015893650
300810-5414-01: RNCC: 3 | RNVC: 2

23 Oct 2010

5975-01-589-6469
Electrical Tie Down Mounting Base

015896469
054007-06291: RNCC: 3 | RNVC: 2
054007-06291: RNCC: 5 | RNVC: 9
3717474: RNCC: 7 | RNVC: 2
3717474: RNCC: 7 | RNVC: 9

1 Nov 2010

5975-01-589-7993
Electrical Conduit Locknut

015897993
7513K242: RNCC: 3 | RNVC: 2

5 Nov 2010

5975-01-590-0170
Switch Terminal Cover

015900170
1231/72: RNCC: 3 | RNVC: 2
04-20331: RNCC: 7 | RNVC: 2

15 Nov 2010

5975-01-590-6618
Electrical Equipment Mounting Base

015906618
102709-G3-10: RNCC: 3 | RNVC: 9

15 Dec 2010

5975-01-590-9035
Drawer Latch Assy

015909035
G751511-1: RNCC: 3 | RNVC: 2

30 Dec 2010

5975-01-597-3630
Electrical Wall Plate

015973630
30-8787-BU: RNCC: 3 | RNVC: 2
30-8787-BU: RNCC: 5 | RNVC: 9

8 Jun 2011

5975-01-605-1999
Rigid Nonmetallic Conduit

016051999
4G19125-119A: RNCC: 3 | RNVC: 2

16 Apr 2012

5975-01-598-3385
Electronic Equipment Mounting Tray

015983385
4305488: RNCC: 3 | RNVC: 2
4305488: RNCC: 5 | RNVC: 2

21 Jul 2011

5975-01-600-9583
Electrical Conduit Coupling Nut

016009583
844: RNCC: 3 | RNVC: 2
7466K37: RNCC: 5 | RNVC: 2

4 Jan 2012

5975-01-603-5362
Electrical Grounding Plate

016035362
37073-96: RNCC: 3 | RNVC: 2

6 Mar 2012

5975-01-603-7708
Electronic Equipment Mounting Tray

016037708
07006B0620: RNCC: 3 | RNVC: 2
07006B0620: RNCC: 5 | RNVC: 2
07006B0620: RNCC: 5 | RNVC: 2
07006B0620: RNCC: 5 | RNVC: 9

15 Mar 2012

5975-01-603-7741
Electrical Equipment Mounting Base

016037741
08002B1250: RNCC: 3 | RNVC: 2

15 Mar 2012

5975-01-604-8062
Junction Box

016048062
878492K16: RNCC: 3 | RNVC: 2

13 Apr 2012

5975-01-604-8303
Lug Boot

016048303
120809-A00: RNCC: 3 | RNVC: 2
120283ITEM101: RNCC: 5 | RNVC: 2

13 Apr 2012

5975-01-606-4618
Electrical Box Connector

016064618
9106K431: RNCC: 3 | RNVC: 2

18 May 2012

5975-01-606-6189
Electrical Nonmetallic Conduit Assembly

016066189
CA00886-84550: RNCC: 3 | RNVC: 2

22 May 2012

5975-01-606-8308
Electrical Conduit Sealing Fitting

016068308
710-106NFA20B16C20: RNCC: 3 | RNVC: 2

24 May 2012

5975-01-608-3696
Electrical Equipment Mounting Base

016083696
901-060-335-105: RNCC: 3 | RNVC: 2

25 Jun 2012

5975-01-609-8139
Electrical Components Tie Down Strap

016098139
0014-18-0129: RNCC: 3 | RNVC: 2

3 Aug 2012

5975-01-609-6021
Electrical Grounding Plate

016096021
87407206: RNCC: 3 | RNVC: 2

30 Jul 2012

5975-01-609-8967
Electrical Equipment Mounting Base

016098967
168K231G01: RNCC: 3 | RNVC: 2

6 Aug 2012

5975-01-609-8969
Electrical Equipment Mounting Base

016098969
168K219G02: RNCC: 3 | RNVC: 2
168K219G02: RNCC: 3 | RNVC: 2

6 Aug 2012

5975-01-609-9822
Flexible Metal Conduit Assembly

016099822
3260AS1328-48: RNCC: 3 | RNVC: 2

7 Aug 2012

5975-01-610-0945
Electrical-Electronic Equipment Panel

016100945
12510791: RNCC: 3 | RNVC: 2
12510791: RNCC: 5 | RNVC: 2
12510791: RNCC: D | RNVC: 9

9 Aug 2012

5975-01-610-0679
Electrical Equipment Mounting Base

016100679
833HN285-1: RNCC: 3 | RNVC: 2

9 Aug 2012

5975-01-610-6331
Electrical-Electronic Equipment Chassis

016106331
40B160902-03: RNCC: 3 | RNVC: 2
40B160902-03: RNCC: 5 | RNVC: 2

23 Aug 2012

5975-01-610-6683
Electrical Nonmetallic Conduit Assembly

016106683
3260AS1328-71: RNCC: 1 | RNVC: 2
749-844-71: RNCC: 3 | RNVC: 2
3260AS1328: RNCC: D | RNVC: 9

24 Aug 2012

5975-01-612-6450
Guide Rail

016126450
980303-25-10: RNCC: 3 | RNVC: 2

17 Oct 2012

5975-01-614-9808
Electrical Equipment Mounting Base

016149808
9800-49373-0000: RNCC: 3 | RNVC: 2

20 Dec 2012

5975-01-614-4871
Electrical-Electronic Equipment Panel

016144871
11446577-2: RNCC: 3 | RNVC: 2
11446577-2: RNCC: 3 | RNVC: 2
11446577-2: RNCC: 3 | RNVC: 2
11446577-2: RNCC: 3 | RNVC: 2

5 Dec 2012

5975-01-615-3045
Electrical-Electronic Equipment Chassis

016153045
FH31310G1: RNCC: 3 | RNVC: 2

8 Jan 2013

5975-01-615-3037
Electrical-Electronic Equipment Chassis

016153037
FH31305G4: RNCC: 3 | RNVC: 2

8 Jan 2013

5975-01-615-7334
Electrical-Electronic Equipment Chassis

016157334
12041-6800-01: RNCC: 3 | RNVC: 2

22 Jan 2013

5975-01-616-2141
Electrical Cable Protector

016162141
11018G0098: RNCC: 3 | RNVC: 2
512844: RNCC: 5 | RNVC: 2

5 Feb 2013

5975-01-616-5874
Electrical Box Connector

016165874
OD70-1898-00: RNCC: 1 | RNVC: 2
3225: RNCC: 3 | RNVC: 2

20 Feb 2013

5975-01-617-0678
Electrical Equipment Cabinet

016170678
340STDN5411ZX: RNCC: 3 | RNVC: 2
13530276-2: RNCC: 3 | RNVC: 2

8 Mar 2013

5975-01-617-1084
Flexible Nonmetallic Conduit

016171084
92N3675: RNCC: 3 | RNVC: 2

12 Mar 2013

5975-01-617-4122
Cable Hanger

016174122
A3325745: RNCC: 3 | RNVC: 2

21 Mar 2013

5975-01-617-6947
Interconnecting Box Cover

016176947
12555319: RNCC: 3 | RNVC: 2

1 Apr 2013

5975-01-617-7893
Electrical Wall Plate

016177893
SS1C: RNCC: 3 | RNVC: 2

3 Apr 2013

5975-01-619-2833
Rail Guide.Electric Component Stop

016192833
PPI-51: RNCC: 3 | RNVC: 2

23 May 2013

5975-01-619-8173
Electrical Box Connector

016198173
025-40695-000: RNCC: 3 | RNVC: 2

19 Jun 2013

5975-01-620-0820
Electrical Box Connector

016200820
C-500: RNCC: 3 | RNVC: 2
11B294137-3: RNCC: 5 | RNVC: 2
3302M-TB: RNCC: 5 | RNVC: 2

1 Jul 2013

5975-01-632-3429
Electrical Equipment Mounting Base

016323429
901-370-345-755: RNCC: 3 | RNVC: 2

16 Oct 2014

5975-01-640-7665
Cable Terminal Chamber

016407665
KMW134069: RNCC: 3 | RNVC: 2
K134069: RNCC: 5 | RNVC: 2
K134069: RNCC: 5 | RNVC: 9
10454199: RNCC: 6 | RNVC: 9
5172P00000 FIND NO 18: RNCC: C | RNVC: 1

22 Dec 2014

5975-01-642-4518
Stuffing Tube

016424518
SEEPA-MP-03-C: RNCC: 3 | RNVC: 2

25 Feb 2015

5975-01-643-4755
Stuffing Tube

016434755
41010035: RNCC: 3 | RNVC: 2

2 Apr 2015

5975-01-644-8409
Electrical Components Tie Down Strap

016448409
O-16-G10-W: RNCC: 3 | RNVC: 2
6912K572: RNCC: 5 | RNVC: 2
6912K572: RNCC: 5 | RNVC: 9

21 May 2015

5975-01-646-9858
Electrical Nonmetallic Conduit Assembly

016469858
8590862-1: RNCC: 3 | RNVC: 2

6 Aug 2015

5975-01-620-4692
Electrical Cable Protector

016204692
232A627-2: RNCC: 3 | RNVC: 2
232A627: RNCC: D | RNVC: 9

25 Jul 2013

5975-01-622-4403
Electrical Grounding Plate

016224403
7147-1167-5: RNCC: 3 | RNVC: 2
7147-1167-5: RNCC: 5 | RNVC: 9
57K6751: RNCC: 5 | RNVC: 9

8 Oct 2013

5975-01-623-9468
Rigid Nonmetallic Conduit

016239468
7124471: RNCC: 3 | RNVC: 2

9 Dec 2013

5975-01-623-8406
Junction Box

016238406
482-7067865-A11: RNCC: 3 | RNVC: 2
H6891703-A11: RNCC: 5 | RNVC: 2

4 Dec 2013

5975-01-625-0604
Raceway Coupler

016250604
HBLALU3817: RNCC: 3 | RNVC: 2
11A7000488: RNCC: 7 | RNVC: 9

23 Jan 2014

5975-01-626-6598
Metallic Raceway

016266598
HBLALU3800B10: RNCC: 3 | RNVC: 2
11A7000493-7: RNCC: 7 | RNVC: 2

19 Mar 2014

5975-01-627-6534
Electrical-Electronic Equipment Panel

016276534
724E2157-101: RNCC: 3 | RNVC: 2

22 Apr 2014

5975-01-629-5543
Electrical Equipment Shelf

016295543
FFKIT0200: RNCC: 3 | RNVC: 2

7 Jul 2014

5975-01-630-2011
Electrical Equipment Mounting Base

016302011
800730: RNCC: 3 | RNVC: 1
311144: RNCC: 5 | RNVC: 2
800730: RNCC: 5 | RNVC: 2

29 Jul 2014

5975-01-630-5691
Electrical-Electronic Equipment Chassis

016305691
7300095: RNCC: 3 | RNVC: 1
100-CA-1624ITEM5: RNCC: 5 | RNVC: 1

9 Aug 2014

5975-01-666-7170
Electrical Wall Plate

016667170
MM510C: RNCC: 3 | RNVC: 2

18 Sep 2017

5975-01-677-8470
Electrical-Electronic Equipment Panel

016778470
12603890: RNCC: 3 | RNVC: 2

9 Jan 2019

5975-01-667-8342
Blank Panel

016678342
255703: RNCC: 3 | RNVC: 9
MIL255703: RNCC: 5 | RNVC: 2

1 Nov 2017

5975-01-692-0907
Electrical Conduit Adapter

016920907
3/8-4F4OHG5SS: RNCC: 3 | RNVC: 2
NV1032242 FIND 12: RNCC: C | RNVC: 1

18 Nov 2020

5975-01-693-2262
Electronic Junction Rack

016932262
12273237-5: RNCC: 3 | RNVC: 2
12273237: RNCC: D | RNVC: 9

29 Jan 2021

5975-01-668-5832
Electrical Cable Protector

016685832
CLT38N-C630: RNCC: 3 | RNVC: 2

29 Nov 2017

5975-01-694-2533
Electrical Equipment Rack

016942533
505M/0135: RNCC: 3 | RNVC: 2

24 Mar 2021

5975-01-669-4693
Strain Electrical Conductor Clamp

016694693
BACC10GE4A: RNCC: 3 | RNVC: 1

9 Jan 2018

5975-01-682-0131
Electrical-Electronic Equipment Chassis

016820131
405012-01: RNCC: 3 | RNVC: 2
0S6900-FT-F: RNCC: 5 | RNVC: 9
405012: RNCC: D | RNVC: 9

17 Jul 2019

5975-01-684-1607
Interconnecting Box

016841607
4354574: RNCC: 3 | RNVC: 2

23 Oct 2019

5975-01-672-2304
Conduit Outlet

016722304
LB25: RNCC: 3 | RNVC: 2

25 Apr 2018

5975-01-685-6721
Guide Rail

016856721
9265C52H01: RNCC: 3 | RNVC: 2

7 Jan 2020

5975-01-674-3263
Electrical-Electronic Equipment Panel

016743263
393K12732-119: RNCC: 3 | RNVC: 2
393K12732-119: RNCC: 3 | RNVC: 9
393K12732: RNCC: D | RNVC: 9

23 Jul 2018

5975-01-685-9861
Junction Box

016859861
AB-1086JH: RNCC: 3 | RNVC: 2

24 Jan 2020

5975-01-651-3845
Flexible Metal Conduit Assembly

016513845
23A02931-43: RNCC: 3 | RNVC: 2

15 Jan 2016

5975-01-651-4621
Electrical Conduit Coupling Nut

016514621
A4711: RNCC: 3 | RNVC: 2

20 Jan 2016

5975-01-652-6600
Mounting Plate

016526600
768838: RNCC: 3 | RNVC: 1
730807: RNCC: 5 | RNVC: 1

29 Feb 2016

5975-01-651-7308
Stuffing Tube

016517308
4598: RNCC: 3 | RNVC: 2

28 Jan 2016

5975-01-652-9694
Ground Rod

016529694
0130-1200-02: RNCC: 3 | RNVC: 2

9 Mar 2016

5975-01-653-0623
Electrical Wall Plate

016530623
184892-001: RNCC: 3 | RNVC: 2

10 Mar 2016

5975-01-659-1810
Electrical Tie Down Mounting Base

016591810
MCMS30-P-C: RNCC: 3 | RNVC: 2

8 Nov 2016

5975-01-661-5412
Electronic Equipment Mounting Tray

016615412
6631741-1: RNCC: 3 | RNVC: 2

7 Mar 2017

5975-01-662-0517
Electrical-Electronic Equipment Panel

016620517
320-6896169: RNCC: 3 | RNVC: 2

24 Mar 2017

5975-01-662-5181
Cable Marker Sleeve

016625181
HT-SCE-1/4-2.0-9: RNCC: 3 | RNVC: 2

10 Apr 2017

5975-01-663-6614
Junction Box Cover

016636614
LJCG01: RNCC: 3 | RNVC: 2

17 May 2017

5975-01-665-4212
Electrical Equipment Rack

016654212
03002A5931: RNCC: 3 | RNVC: 2

28 Jul 2017

Load More Results