What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 101 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 101of 491

5975-01-567-8252
Stuffing Tube

015678252
W084831726: RNCC: 3 | RNVC: 2
DAAK002129 SEQ #39: RNCC: 5 | RNVC: 2

8 Oct 2008

5975-01-568-2328
Junction Box

015682328
B-12105CH: RNCC: 3 | RNVC: 2
B-12105CH: RNCC: 3 | RNVC: 9
63-0751-0005: RNCC: 5 | RNVC: 2

23 Oct 2008

5975-01-568-2015
Interconnecting Box

015682015
1336529: RNCC: 3 | RNVC: 2

23 Oct 2008

5975-01-568-1968
Junction Box

015681968
7-03-414: RNCC: 3 | RNVC: 2

22 Oct 2008

5975-01-568-1266
Blank Panel

015681266
19C337621P1: RNCC: 3 | RNVC: 2

21 Oct 2008

5975-01-566-6948
Cable Spacer

015666948
H373779: RNCC: 3 | RNVC: 2

8 Sep 2008

5975-01-568-6279
Vehicular Airconditioning-Heating Duct Assembly

015686279
3691327C1: RNCC: 3 | RNVC: 2
0148120975-00: RNCC: 5 | RNVC: 2
0148120975-00: RNCC: 5 | RNVC: 9
3691327C1L: RNCC: 5 | RNVC: 9
0148120975-00: RNCC: 5 | RNVC: 9

4 Nov 2008

5975-01-569-4316
Electronic Equipment Mounting Tray

015694316
827-10052-2: RNCC: 1 | RNVC: 2
7001073-9: RNCC: 3 | RNVC: 2

2 Dec 2008

5975-01-577-3978
Electrical Equipment Mounting Base

015773978
3855771: RNCC: 3 | RNVC: 2
3831285: RNCC: 5 | RNVC: 9
3855771: RNCC: 5 | RNVC: 9

3 Sep 2009

5975-01-578-1385
Electrical Components Tie Down Strap

015781385
352370: RNCC: 3 | RNVC: 2
ZB0352370: RNCC: 5 | RNVC: 2
0352370: RNCC: 5 | RNVC: 2
Z352370: RNCC: 5 | RNVC: 9

28 Sep 2009

5975-01-578-5769
Electrical Components Tie Down Strap

015785769
PRT5EH-Q0: RNCC: 3 | RNVC: 2

13 Oct 2009

5975-01-584-0570
Electrical Equipment Mounting Base

015840570
12050-3040-03: RNCC: 3 | RNVC: 2
12050-3050-01: RNCC: 5 | RNVC: 9
10427901: RNCC: 6 | RNVC: 9

15 Apr 2010

5975-01-584-2951
A Connector Adapter

015842951
40008200+000: RNCC: 3 | RNVC: 2
40008200-000: RNCC: 5 | RNVC: 2

22 Apr 2010

5975-01-584-6472
Interconnecting Box

015846472
33307-40061-10: RNCC: 3 | RNVC: 2
33307-40061-10: RNCC: 5 | RNVC: 9

3 May 2010

5975-01-570-4744
Electrical Grounding Plate

015704744
364290: RNCC: 3 | RNVC: 2

2 Jan 2009

5975-01-572-7748
Electrical-Electronic Equipment Chassis

015727748
651-0595-008: RNCC: 3 | RNVC: 2

25 Mar 2009

5975-01-572-9358
Electrical Components Tie Down Strap

015729358
6912K551: RNCC: 3 | RNVC: 2

31 Mar 2009

5975-01-573-6427
Electrical Nonmetallic Conduit Assembly

015736427
750NA102NFA221A221-16-174-525: RNCC: 3 | RNVC: 2

30 Apr 2009

5975-01-574-9194
Electrical Equipment Shelf

015749194
12505276-001: RNCC: 3 | RNVC: 2
12505276: RNCC: D | RNVC: 9

15 Jun 2009

5975-01-574-9923
Cable Strain Relief Bushing

015749923
1.691.1300.01: RNCC: 3 | RNVC: 2
500K2536: RNCC: 5 | RNVC: 2
500K2536: RNCC: 5 | RNVC: 9
500K2536: RNCC: 7 | RNVC: 9

16 Jun 2009

5975-01-575-6905
Ground Rod

015756905
MOBGRDSTK583: RNCC: 3 | RNVC: 2

13 Jul 2009

5975-01-591-4828
Lever Assy

015914828
198591-K01: RNCC: 3 | RNVC: 2

27 Jan 2011

5975-01-591-4925
Panel Assy

015914925
199205-K11: RNCC: 3 | RNVC: 2

27 Jan 2011

5975-01-591-5058
Puffer Nozzle

015915058
715137-K01: RNCC: 3 | RNVC: 2
715137K01: RNCC: 3 | RNVC: 2

27 Jan 2011

5975-01-592-8527
Electrical Conduit Adapter

015928527
07198: RNCC: 3 | RNVC: 2
P102320: RNCC: 5 | RNVC: 2

23 Mar 2011

5975-01-593-6461
Electrical Equipment Shelf

015936461
12505276-004: RNCC: 3 | RNVC: 2

13 Apr 2011

5975-01-595-4250
Strain Electrical Conductor Clamp

015954250
9000287: RNCC: 3 | RNVC: 2

27 Apr 2011

5975-01-596-0428
Electrical Components Tie Down Strap

015960428
13227E5821: RNCC: 3 | RNVC: 2

11 May 2011

5975-01-595-7300
Electrical-Electronic Equipment Panel

015957300
28023-320-0223/RS(A06): RNCC: 3 | RNVC: 2

5 May 2011

5975-01-586-5443
Electrical Components Tie Down Strap

015865443
2370050: RNCC: 3 | RNVC: 2

1 Jul 2010

5975-01-586-4685
Wire Strand Hanger

015864685
20478-01: RNCC: 3 | RNVC: 2

29 Jun 2010

5975-01-587-4046
Sensor Conductivity Cell

015874046
891-08739-000: RNCC: 3 | RNVC: 2
CS40-1.0-10KTC-316JB-MONEL-PEKK: RNCC: 5 | RNVC: 2

5 Aug 2010

5975-01-588-4138
Stuffing Tube

015884138
41010977: RNCC: 3 | RNVC: 2

16 Sep 2010

5975-01-590-3959
Electrical-Electronic Equipment Chassis

015903959
SCP1893: RNCC: 3 | RNVC: 2

3 Dec 2010

5975-01-590-3251
Electrical Cable Protector

015903251
15662234-1: RNCC: 3 | RNVC: 2

30 Nov 2010

5975-01-590-5314
Electrical Box Connector

015905314
4241106-501: RNCC: 3 | RNVC: 2

8 Dec 2010

5975-01-596-7350
Electrical Grounding Plate

015967350
03002A1840-20: RNCC: 3 | RNVC: 2

24 May 2011

5975-01-596-7367
Electrical Conduit Elbow

015967367
2203: RNCC: 3 | RNVC: 2

24 May 2011

5975-01-597-1467
Electrical Grounding Plate

015971467
03002A1840-12: RNCC: 3 | RNVC: 2

31 May 2011

5975-01-597-3343
Electrical Equipment Rack

015973343
10035520: RNCC: 3 | RNVC: 2

7 Jun 2011

5975-01-607-8986
Electrical Box Connector

016078986
S1121: RNCC: 3 | RNVC: 2

18 Jun 2012

5975-01-607-1760
Guide Rail

016071760
9080MH339: RNCC: 3 | RNVC: 2
PL491-01-010 LINE ITEM 114: RNCC: 5 | RNVC: 2

4 Jun 2012

5975-01-608-6923
Conduit Outlet

016086923
2AAT12095: RNCC: 3 | RNVC: 2
2AAT12095: RNCC: 3 | RNVC: 9

9 Jul 2012

5975-01-608-6980
Electrical Conduit Nipple

016086980
91700283: RNCC: 3 | RNVC: 2
91700283: RNCC: 3 | RNVC: 9

9 Jul 2012

5975-01-608-6952
Stuffing Tube

016086952
2AAT12093: RNCC: 3 | RNVC: 2
2AAT12093: RNCC: 3 | RNVC: 9

9 Jul 2012

5975-01-597-5877
Electrical Grounding Plate

015975877
3881419: RNCC: 3 | RNVC: 2
3881419: RNCC: 5 | RNVC: 9

15 Jun 2011

5975-01-597-5840
Junction Box

015975840
6782403-2: RNCC: 3 | RNVC: 2

15 Jun 2011

5975-01-599-0221
Electrical Equipment Shelf

015990221
3925138: RNCC: 3 | RNVC: 2
3925138: RNCC: 5 | RNVC: 9

9 Sep 2011

5975-01-601-1871
Electrical Equipment Mounting Base

016011871
RF-7871-VM001: RNCC: 3 | RNVC: 2
JKN00179086: RNCC: 5 | RNVC: 2

11 Jan 2012

5975-01-600-9612
Cable Hanger

016009612
82-2810738-1: RNCC: 3 | RNVC: 2

4 Jan 2012

5975-01-601-9848
Ground Rod

016019848
G3370: RNCC: 3 | RNVC: 2

26 Jan 2012

5975-01-606-6206
Flexible Metal Conduit Assembly

016066206
749-396: RNCC: 3 | RNVC: 2

22 May 2012

5975-01-609-8554
Flexible Metal Conduit Assembly

016098554
4G14260-101A: RNCC: 3 | RNVC: 2

4 Aug 2012

5975-01-610-6337
Electrical Box Connector

016106337
L100625: RNCC: 3 | RNVC: 2

23 Aug 2012

5975-01-614-3447
Electrical Components Tie Down Strap

016143447
S-3808: RNCC: 3 | RNVC: 2

30 Nov 2012

5975-01-615-2446
Stuffing Tube

016152446
218344-13-16: RNCC: 3 | RNVC: 2
SEEPA-MP-02-C316L: RNCC: 5 | RNVC: 2

7 Jan 2013

5975-01-615-1151
Electrical-Electronic Equipment Chassis

016151151
SCP1192-4: RNCC: 3 | RNVC: 2

28 Dec 2012

5975-01-615-9467
Flexible Nonmetallic Conduit

016159467
0708172: RNCC: 3 | RNVC: 2
10042676: RNCC: 7 | RNVC: 2
S000082: RNCC: D | RNVC: 9

28 Jan 2013

5975-01-616-9612
Electrical Conduit Adapter

016169612
AX0685-2824-SP: RNCC: 3 | RNVC: 2
LN0000918: RNCC: C | RNVC: 1

5 Mar 2013

5975-01-615-7699
Electrical-Electronic Equipment Chassis

016157699
138663: RNCC: 3 | RNVC: 2
03011E7082: RNCC: D | RNVC: 9

23 Jan 2013

5975-01-616-1178
Cable Marker Sleeve

016161178
PS-1000-2-YL: RNCC: 3 | RNVC: 2
05008E4601-05: RNCC: 7 | RNVC: 2

1 Feb 2013

5975-01-616-9617
Electrical Conduit Adapter

016169617
AX0772-28-SP: RNCC: 3 | RNVC: 2
LN0000609: RNCC: C | RNVC: 1

5 Mar 2013

5975-01-618-9697
Electrical Components Tie Down Strap

016189697
A3184251: RNCC: 3 | RNVC: 2

13 May 2013

5975-01-619-9410
Electrical Equipment Rack

016199410
XFR-367-019: RNCC: 3 | RNVC: 2

24 Jun 2013

5975-01-633-4428
Cable Terminal Chamber

016334428
AGP3300-T1-D24-CA1M: RNCC: 3 | RNVC: 9

21 Nov 2014

5975-01-642-2024
Electrical Conduit Ferrule

016422024
RSR-416-E: RNCC: 3 | RNVC: 2

17 Feb 2015

5975-01-642-6353
Electrical-Electronic Equipment Panel

016426353
70012: RNCC: 3 | RNVC: 2
60002 REV ITEM NO 4: RNCC: 5 | RNVC: 2

4 Mar 2015

5975-01-643-5736
Cable Marker Sleeve

016435736
MSB41TB16: RNCC: 3 | RNVC: 2
PL92907-1 ITEM 18: RNCC: 5 | RNVC: 2
PL92909 ITEM 14: RNCC: 5 | RNVC: 2
PL92911 ITEM 6: RNCC: 5 | RNVC: 2
PL92907-2 ITEM 18: RNCC: 5 | RNVC: 2
19X7217: RNCC: 5 | RNVC: 2
92907: RNCC: D | RNVC: 9

7 Apr 2015

5975-01-643-6787
Electrical Equipment Mounting Base

016436787
301-5190-001: RNCC: 3 | RNVC: 2

9 Apr 2015

5975-01-644-4865
Electrical Equipment Rack

016444865
12505987-004: RNCC: 3 | RNVC: 2
12505987-004: RNCC: 5 | RNVC: 2
12505987: RNCC: D | RNVC: 9

7 May 2015

5975-01-645-6713
Blank Panel

016456713
71450-21109-104: RNCC: 3 | RNVC: 2

24 Jun 2015

5975-01-647-5547
Tray Assembly

016475547
901-370-345-733: RNCC: 3 | RNVC: 2

24 Aug 2015

5975-01-648-3973
Conduit Chase Nipple

016483973
RP2140-EM08: RNCC: 3 | RNVC: 2
RP2104-EM08: RNCC: 5 | RNVC: 9
RP2104-EM08: RNCC: 5 | RNVC: 9

23 Sep 2015

5975-01-624-2816
Electrical-Electronic Equipment Panel

016242816
A3325719: RNCC: 3 | RNVC: 2

20 Dec 2013

5975-01-625-1468
Electrical Equipment Leg

016251468
11018G0326: RNCC: 3 | RNVC: 2

27 Jan 2014

5975-01-625-7759
Electrical Components Tie Down Strap

016257759
AL-24-175-0-L: RNCC: 3 | RNVC: 2
SAE-AS33671/10: RNCC: 5 | RNVC: 2
MS3367-10-0: RNCC: 5 | RNVC: 9
SAE-AS33671/10: RNCC: 5 | RNVC: 9

13 Feb 2014

5975-01-626-8938
Electrical Tie Down Mounting Base

016268938
696-41976: RNCC: 3 | RNVC: 2
7296K25: RNCC: 5 | RNVC: 2
SW37158: RNCC: 5 | RNVC: 2

24 Mar 2014

5975-01-628-2233
Electrical Components Tie Down Strap

016282233
7130K19: RNCC: 3 | RNVC: 2
7130K19: RNCC: 5 | RNVC: 9

14 May 2014

5975-01-631-1490
Electrical Cable Protector

016311490
13015532-1: RNCC: 3 | RNVC: 2

3 Sep 2014

5975-01-676-7829
Electrical-Electronic Equipment Panel

016767829
66620-806: RNCC: 3 | RNVC: 2
66620-802-01 ITEM 9: RNCC: C | RNVC: 1

13 Nov 2018

5975-01-667-7414
Electrical-Electronic Equipment Chassis

016677414
G600600225G: RNCC: 3 | RNVC: 2
3890AS003331-01: RNCC: 7 | RNVC: 2
3890AS003331-01: RNCC: D | RNVC: 9

27 Oct 2017

5975-01-691-1780
Electrical Conduit Adapter

016911780
1063982: RNCC: 3 | RNVC: 2
1063982: RNCC: 5 | RNVC: 2

24 Sep 2020

5975-01-690-0284
Electrical Tie Down Mounting Base

016900284
BACM14L3AUC: RNCC: 3 | RNVC: 2

22 Jul 2020

5975-01-667-8419
Electrical Equipment Foot

016678419
250946: RNCC: 3 | RNVC: 9
MIL250946: RNCC: 5 | RNVC: 2

1 Nov 2017

5975-01-668-5278
Electrical Box Connector

016685278
LT43E-NEW: RNCC: 3 | RNVC: 9

28 Nov 2017

5975-01-681-3924
Electrical Grounding Plate

016813924
740C-9-6: RNCC: 3 | RNVC: 2
740C-9-6: RNCC: 5 | RNVC: 2
740C-9-6: RNCC: 5 | RNVC: 9
740C-9-617: RNCC: 5 | RNVC: 9
740C: RNCC: D | RNVC: 9

14 Jun 2019

5975-01-681-6819
Junction Box

016816819
CU-123: RNCC: 3 | RNVC: 2

28 Jun 2019

5975-01-686-9105
Scope Assembly

016869105
710-0329: RNCC: 3 | RNVC: 2

10 Mar 2020

5975-01-687-2670
Aircraft Equipment Quick Disconnect Handle

016872670
57710P112108: RNCC: 3 | RNVC: 2

25 Mar 2020

5975-01-669-4305
Electrical Equipment Mounting Base

016694305
622-8150-001: RNCC: 3 | RNVC: 1

9 Jan 2018

5975-01-671-9712
Electrical Components Tie Down Strap

016719712
6001-001539: RNCC: 3 | RNVC: 2
10090: RNCC: 5 | RNVC: 1
10090: RNCC: 5 | RNVC: 9

17 Apr 2018

5975-01-674-9703
Blank Panel

016749703
FP1901U: RNCC: 3 | RNVC: 2

16 Aug 2018

5975-01-652-3978
Flexible Metal Conduit Assembly

016523978
901-033-866-102: RNCC: 3 | RNVC: 2
901-033-866: RNCC: D | RNVC: 9

20 Feb 2016

5975-01-653-6512
Cable Marker Sleeve

016536512
SS7074-1330: RNCC: 3 | RNVC: 2
SS7074: RNCC: 3 | RNVC: 9

31 Mar 2016

5975-01-655-4112
Electrical-Electronic Equipment Chassis

016554112
4443SNL-07: RNCC: 3 | RNVC: 2

26 May 2016

5975-01-657-4459
Electrical Conduit Adapter

016574459
M24758-4B: RNCC: 3 | RNVC: 2

15 Aug 2016

5975-01-659-5724
Electrical Cable Nipple

016595724
5720R: RNCC: 3 | RNVC: 9
07011P3733-01: RNCC: 7 | RNVC: 2
07011P3733: RNCC: D | RNVC: 9

5 Dec 2016

5975-01-659-3456
Stuffing Tube

016593456
CC-0010060: RNCC: 3 | RNVC: 2

18 Nov 2016

5975-01-659-6087
Electrical-Electronic Equipment Panel

016596087
320-6896169ITEM2: RNCC: 1 | RNVC: 2
A16P14SS: RNCC: 3 | RNVC: 2
320-6896169: RNCC: D | RNVC: 9

6 Dec 2016

5975-01-660-5853
Cable Hanger

016605853
808-7069263-WW-0003: RNCC: 3 | RNVC: 2
302-8543641ITEM28: RNCC: 5 | RNVC: 9

25 Jan 2017

5975-01-663-1736
Electrical Cable Assembly Protector

016631736
7377794: RNCC: 3 | RNVC: 2

28 Apr 2017

5975-01-664-3164
Electrical Cable Protector

016643164
7377610: RNCC: 3 | RNVC: 2

14 Jun 2017

5975-01-664-3285
Electrical Cable Nipple

016643285
7000132581: RNCC: 3 | RNVC: 2
HDBB-410-1-250: RNCC: 3 | RNVC: 9
HDBB-410-1-250: RNCC: 5 | RNVC: 9

15 Jun 2017

5975-01-665-8355
Electrical Equipment Rack

016658355
DG-008335B: RNCC: 3 | RNVC: 2
DG-008122ITEM1: RNCC: 5 | RNVC: 2

15 Aug 2017

5975-14-478-8366
Electrical Conductor Bushing

144788366
44036355: RNCC: 3 | RNVC: 2
44036355: RNCC: 5 | RNVC: 2
44036355: RNCC: 5 | RNVC: 9

23 Nov 1995

5975-99-253-4923
Electrical Conduit Coupling Nut

992534923
CP3169-5: RNCC: 3 | RNVC: 2
9852-5625: RNCC: 5 | RNVC: 2
989007937: RNCC: 6 | RNVC: 9

25 Apr 1991

5975-99-728-5146
Electrical Equipment Mounting Base

997285146
00-042-02: RNCC: 3 | RNVC: 2

22 Oct 1986

5975-01-690-4507
Electrical-Electronic Equipment Panel

016904507
900-51192-2: RNCC: 3 | RNVC: 2

12 Aug 2020

5975-01-690-7088
Electrical Grounding Plate

016907088
G14000H000-1265.0: RNCC: 3 | RNVC: 2

27 Aug 2020

5975-01-667-8120
Cable Marker Sleeve

016678120
PSPT-187-1-WT: RNCC: 3 | RNVC: 2
3890AS003180-01-H03: RNCC: 5 | RNVC: 1
3890AS003180-01-H03: RNCC: 5 | RNVC: 1
01D3116H03: RNCC: 5 | RNVC: 2
01D3116: RNCC: 7 | RNVC: 2

31 Oct 2017

5975-01-691-3695
Electrical Components Tie Down Strap

016913695
SAE-AS33671: RNCC: 3 | RNVC: 1
MS3367-4-15: RNCC: 3 | RNVC: 2
SAE-AS23190: RNCC: 5 | RNVC: 1
PLT1M-76: RNCC: 5 | RNVC: 2
MS3367-4-15: RNCC: 5 | RNVC: 9

6 Oct 2020

5975-01-691-8791
Electronic Equipment Mounting Tray

016918791
901-370-345-791: RNCC: 3 | RNVC: 2

4 Nov 2020

5975-01-668-4263
Tee Raceway

016684263
AL3315: RNCC: 3 | RNVC: 2
13551626-11: RNCC: 7 | RNVC: 2

22 Nov 2017

5975-01-668-5835
Electrical Conduit Adapter

016685835
74D695001-1007: RNCC: 3 | RNVC: 2

29 Nov 2017

5975-01-605-0289
Electrical Nonmetallic Conduit Assembly

016050289
EFC038: RNCC: 3 | RNVC: 2

16 Apr 2012

5975-01-606-3466
Strain Electrical Conductor Clamp

016063466
H348161-1: RNCC: 3 | RNVC: 2

16 May 2012

5975-01-607-6447
Flexible Metal Conduit Assembly

016076447
749-395-851: RNCC: 3 | RNVC: 2

11 Jun 2012

5975-01-597-9474
Electrical Grounding Plate

015979474
23039462-2: RNCC: 3 | RNVC: 2
23039462-2: RNCC: 5 | RNVC: 9

23 Jun 2011

5975-01-597-9187
Junction Box Assembly

015979187
JB-C: RNCC: 3 | RNVC: 2
JB-C: RNCC: 5 | RNVC: 2

22 Jun 2011

5975-01-598-7404
Electrical Wall Plate

015987404
558510-3: RNCC: 3 | RNVC: 2

24 Aug 2011

5975-01-598-7285
Electrical Wall Plate

015987285
558510-4: RNCC: 3 | RNVC: 2

23 Aug 2011

5975-01-666-6841
Electrical Equipment Cabinet

016666841
CU-1475: RNCC: 3 | RNVC: 9
6001B66: RNCC: D | RNVC: 9

15 Sep 2017

5975-01-678-4241
Rigid Metal Conduit Assembly

016784241
2-60216-41: RNCC: 3 | RNVC: 2

6 Feb 2019

5975-12-154-3980
Electrical Conduit Locknut

121543980
221M: RNCC: 3 | RNVC: 2
221M: RNCC: 5 | RNVC: 2

30 May 1969

5975-12-163-7891
Electrical Tie Down Mounting Base

121637891
TM2S8: RNCC: 3 | RNVC: 2
0778699: RNCC: 5 | RNVC: 2
279.627 208: RNCC: 5 | RNVC: 2

30 May 1969

5975-01-668-9905
Junction Box

016689905
140-060XMS-05T5: RNCC: 3 | RNVC: 2
140-060-05: RNCC: D | RNVC: 9

15 Dec 2017

5975-01-673-0856
Junction Box

016730856
PCA-H: RNCC: 3 | RNVC: 2

31 May 2018

5975-01-676-0480
Electrical Equipment Mounting Base

016760480
12006-7149-01: RNCC: 3 | RNVC: 2

9 Oct 2018

5975-01-569-5942
Junction Box

015695942
9955.0045: RNCC: 3 | RNVC: 2

4 Dec 2008

5975-01-584-2954
A Connector Adapter

015842954
40008200+001: RNCC: 3 | RNVC: 2
40008200-001: RNCC: 5 | RNVC: 2

22 Apr 2010

5975-01-584-4737
Blank Panel

015844737
724E3437-101: RNCC: 3 | RNVC: 2

27 Apr 2010

5975-01-598-5864
Rigid Metal Conduit

015985864
600235-3: RNCC: 3 | RNVC: 2
FF-18502PC20: RNCC: 5 | RNVC: 2

15 Aug 2011

5975-01-600-9611
Cable Hanger

016009611
82-2810739-1: RNCC: 3 | RNVC: 2
82-2810739-1: RNCC: 5 | RNVC: 2

4 Jan 2012

5975-01-609-2134
Electrical Equipment Mounting Base

016092134
282610-2: RNCC: 3 | RNVC: 2

19 Jul 2012

5975-01-608-6933
Conduit Outlet Cover

016086933
2AAT12074: RNCC: 3 | RNVC: 2
2AAT12074: RNCC: 3 | RNVC: 9

9 Jul 2012

5975-01-690-2126
Electronic Equipment Mounting Tray

016902126
N156161: RNCC: 3 | RNVC: 2
1041316-REVA: RNCC: 3 | RNVC: 2

30 Jul 2020

5975-01-690-6681
Cable Spacer

016906681
735151012100: RNCC: 3 | RNVC: 2

26 Aug 2020

5975-01-696-3609
Electrical Equipment Leg

016963609
0195-1330-01: RNCC: 3 | RNVC: 2

22 Jul 2021

5975-01-696-9688
Mounting Plate

016969688
12172-1610-02: RNCC: 3 | RNVC: 2
12172-1610: RNCC: D | RNVC: 9

26 Aug 2021

5975-01-683-1280
Electrical-Electronic Equipment Panel

016831280
CB52414-001: RNCC: 3 | RNVC: 2
CB52414: RNCC: D | RNVC: 9

10 Sep 2019

5975-01-682-2892
Electrical Box Connector

016822892
F181813: RNCC: 3 | RNVC: 2
F185511/REV/C ITEM #8: RNCC: D | RNVC: 9
F185511/FIND SHEET 1: RNCC: D | RNVC: 9

31 Jul 2019

5975-01-683-2238
Electronic Equipment Mounting Tray

016832238
629256-4: RNCC: 1 | RNVC: 2
107500001143-00: RNCC: 3 | RNVC: 2
629256: RNCC: D | RNVC: 9

13 Sep 2019

5975-01-684-9002
Electrical-Electronic Equipment Panel

016849002
405-5083-S1: RNCC: 3 | RNVC: 9
405-5083-01: RNCC: 5 | RNVC: 9

20 Nov 2019

5975-01-653-0640
Electrical Equipment Mounting Base

016530640
340-099-503-0: RNCC: 3 | RNVC: 2

10 Mar 2016

5975-01-653-5954
Electrical Box Connector

016535954
CG90-75100: RNCC: 3 | RNVC: 2

30 Mar 2016

5975-01-660-7993
Cable Hanger

016607993
12595025: RNCC: 3 | RNVC: 2
12590197: RNCC: D | RNVC: 9

3 Feb 2017

5975-99-609-2412
Identificati Sleeve

996092412
N170110-17: RNCC: 3 | RNVC: 2

25 Apr 1991

5975-01-553-7901
Electrical Conduit Adapter

015537901
56417: RNCC: 3 | RNVC: 2
56417: RNCC: 3 | RNVC: 2
56417: RNCC: 5 | RNVC: 2
SMU-00000029: RNCC: 5 | RNVC: 2
56417: RNCC: 5 | RNVC: 9

25 Jul 2007

5975-01-555-8269
Conduit Outlet

015558269
HBL560R9W: RNCC: 3 | RNVC: 2

14 Sep 2007

5975-01-556-5462
Flexible Nonmetallic Conduit

015565462
2643669R1: RNCC: 3 | RNVC: 2
2643669R1: RNCC: 7 | RNVC: 2

3 Oct 2007

5975-01-557-0618
Electrical Wall Plate

015570618
1000728: RNCC: 1 | RNVC: 2
NP14BK: RNCC: 3 | RNVC: 2
0946-GG5-055: RNCC: 5 | RNVC: 2

11 Oct 2007

5975-01-557-1003
Flexible Nonmetallic Conduit

015571003
0708152: RNCC: 3 | RNVC: 2
4600-15: RNCC: 5 | RNVC: 9
4600-15: RNCC: 5 | RNVC: 9
12759-00701: RNCC: C | RNVC: 1

11 Oct 2007

5975-01-557-4833
Cable Hanger

015574833
7607321-33: RNCC: 3 | RNVC: 2
200-8180879 ITEM 14: RNCC: 5 | RNVC: 1
200-7607321 ITEM 33: RNCC: 5 | RNVC: 2
7607321-0033: RNCC: 5 | RNVC: 9

24 Oct 2007

5975-01-558-2106
Electrical-Electronic Equipment Chassis

015582106
3774730: RNCC: 3 | RNVC: 2
3648428: RNCC: 5 | RNVC: 9
3774730: RNCC: 5 | RNVC: 9

2 Nov 2007

5975-01-558-3347
Electrical Cable Nipple

015583347
416-1084: RNCC: 3 | RNVC: 2

6 Nov 2007

5975-01-559-5218
Electrical-Electronic Equipment Panel

015595218
12053-1510-03: RNCC: 3 | RNVC: 2

20 Dec 2007

5975-01-559-6756
Electrical Conduit Adapter

015596756
712FS178B1220-31: RNCC: 3 | RNVC: 2

31 Dec 2007

5975-01-560-3035
Electrical Equipment Rack

015603035
SRC1852A: RNCC: 3 | RNVC: 2
SRC1852A: RNCC: 5 | RNVC: 9

24 Jan 2008

5975-01-559-7940
Electrical Components Tie Down Strap

015597940
1A868: RNCC: 3 | RNVC: 2

7 Jan 2008

5975-01-562-5811
Flexible Metal Conduit Assembly

015625811
23A03429-9: RNCC: 3 | RNVC: 2

11 Apr 2008

5975-01-563-6532
Junction Box

015636532
12927738-1: RNCC: 3 | RNVC: 2
12927738: RNCC: D | RNVC: 9

16 May 2008

5975-01-565-8879
Flexible Metal Conduit

015658879
283-0632: RNCC: 3 | RNVC: 2

12 Aug 2008

5975-01-566-0947
Electrical Equipment Rack

015660947
13017922: RNCC: 3 | RNVC: 2

19 Aug 2008

5975-01-566-1962
Electrical Cable Nipple

015661962
FS4H-H2-PROD07: RNCC: 3 | RNVC: 2

25 Aug 2008

5975-01-566-5506
Cable Collar

015665506
073-010456-0001: RNCC: 3 | RNVC: 2
SD18581: RNCC: 5 | RNVC: 2
10361196: RNCC: 6 | RNVC: 9

4 Sep 2008

5975-01-566-3909
Junction Box

015663909
1202500000: RNCC: 3 | RNVC: 2
110E3670P15: RNCC: 5 | RNVC: 2
1202500000: RNCC: 5 | RNVC: 2

29 Aug 2008

5975-01-562-0537
Pcb Motor Servo Pr

015620537
13D150311-01: RNCC: 3 | RNVC: 2

27 Mar 2008

5975-01-566-6875
Electrical Components Tie Down Strap

015666875
87000312: RNCC: 3 | RNVC: 2

8 Sep 2008

5975-01-566-9740
40 Inch Pull Cable

015669740
58046: RNCC: 3 | RNVC: 2

15 Sep 2008

5975-01-567-5882
Electrical-Electronic Equipment Chassis

015675882
269A227-1: RNCC: 3 | RNVC: 2

1 Oct 2008

5975-01-568-3518
Electrical Bonding Ring

015683518
J000002336: RNCC: 3 | RNVC: 2
DAAK002125 SEQ #9: RNCC: D | RNVC: 9

28 Oct 2008

5975-01-577-4872
Insulator Bracket

015774872
MMB-84: RNCC: 3 | RNVC: 2

9 Sep 2009

5975-01-577-9998
Junction Box

015779998
12416413: RNCC: 3 | RNVC: 2
12416413: RNCC: 3 | RNVC: 2
12416413: RNCC: 5 | RNVC: 2
12416413: RNCC: 5 | RNVC: 2

23 Sep 2009

5975-01-579-4938
Electrical Components Tie Down Strap

015794938
SW.75X18BK889-5: RNCC: 3 | RNVC: 2
6605K55: RNCC: 5 | RNVC: 2

13 Nov 2009

5975-01-578-6071
Electrical Wall Plate

015786071
88377810219: RNCC: 3 | RNVC: 2
1000729: RNCC: 5 | RNVC: 2

14 Oct 2009

5975-01-583-6223
Flexible Nonmetallic Conduit

015836223
S2X-6308: RNCC: 3 | RNVC: 2
FIGURE 8-3 ITEM 15: RNCC: 5 | RNVC: 2

30 Mar 2010

5975-01-582-9675
Electrical Components Tie Down Strap

015829675
7130K68: RNCC: 3 | RNVC: 2
7130K68: RNCC: 5 | RNVC: 2

10 Mar 2010

5975-01-583-6785
Electrical Equipment Mounting Base

015836785
3847967: RNCC: 3 | RNVC: 2
3847967: RNCC: 5 | RNVC: 9

1 Apr 2010

5975-01-579-6460
Electrical Components Tie Down Strap

015796460
7567K56: RNCC: 3 | RNVC: 2
10007951: RNCC: 7 | RNVC: 2

19 Nov 2009

5975-01-569-6032
Cable Strain Relief Bushing

015696032
MIL-001-690: RNCC: 3 | RNVC: 2
S1109: RNCC: 5 | RNVC: 2

4 Dec 2008

5975-01-584-1842
Electrical Equipment Mounting Base

015841842
12050-3010-13: RNCC: 3 | RNVC: 2
12050-3010-03: RNCC: 3 | RNVC: 9
10427903: RNCC: 6 | RNVC: 9

20 Apr 2010

5975-01-584-2428
Electronic Equipment Mounting Tray

015842428
449-075-235-109: RNCC: 3 | RNVC: 2
449-075-235: RNCC: D | RNVC: 9

21 Apr 2010

5975-01-571-6949
Electrical Box Connector

015716949
AX0737-2416-SP: RNCC: 3 | RNVC: 2
AX0737-2416-SP: RNCC: 5 | RNVC: 9

13 Feb 2009

5975-01-571-9879
Electrical-Electronic Equipment Chassis

015719879
88-22643: RNCC: 3 | RNVC: 2

24 Feb 2009

5975-01-572-5391
Cable Strain Relief Bushing

015725391
073031205: RNCC: 3 | RNVC: 2

13 Mar 2009

5975-01-576-1009
Electrical Equipment Mounting Base

015761009
4294389: RNCC: 3 | RNVC: 2
4294389: RNCC: 5 | RNVC: 2
872826-2: RNCC: 5 | RNVC: 2

21 Jul 2009

5975-01-576-6316
Electrical Grounding Plate

015766316
RGBHKIT14119.25: RNCC: 3 | RNVC: 2
2348 REV C ITEM 16: RNCC: D | RNVC: 9

10 Aug 2009

5975-01-591-4833
Index Lever Assy

015914833
198717-K01: RNCC: 3 | RNVC: 2

27 Jan 2011

5975-01-591-4922
Panel Assy

015914922
199205-K09: RNCC: 3 | RNVC: 2

27 Jan 2011

5975-01-590-5603
Street Elbow

015905603
2UA71: RNCC: 3 | RNVC: 2
S1611P2400: RNCC: 5 | RNVC: 9
327-7771: RNCC: 5 | RNVC: 9

9 Dec 2010

5975-01-592-6204
Electrical Equipment Mounting Base

015926204
10-GWTBHAVLT: RNCC: 3 | RNVC: 2
7019478: RNCC: 5 | RNVC: 2

14 Mar 2011

5975-01-595-9730
Electrical Tie Down Mounting Base

015959730
7566K25: RNCC: 3 | RNVC: 2
0216096 FIND 12: RNCC: D | RNVC: 9

9 May 2011

NSN 5975-01-596-4651 015964651 PROTECTOR,ELECTRICAL CABLE

5975-01-596-4651
Electrical Cable Protector

015964651
WC-3-10: RNCC: 3 | RNVC: 2
6291E10-ITEM29: RNCC: 5 | RNVC: 2

17 May 2011

5975-01-596-6893
Electrical Grounding Plate

015966893
03002A1840-16: RNCC: 3 | RNVC: 2

23 May 2011

5975-01-596-6918
Electrical Grounding Plate

015966918
03002A1800-2: RNCC: 3 | RNVC: 2

23 May 2011

5975-01-585-0695
Strain Electrical Conductor Clamp

015850695
30-302-1D05G16: RNCC: 3 | RNVC: 2

14 May 2010

5975-01-585-7151
Electrical Equipment Rack

015857151
316-548: RNCC: 3 | RNVC: 9
TSXRKY8: RNCC: 5 | RNVC: 2
316-548: RNCC: C | RNVC: 1

3 Jun 2010

5975-01-586-3095
Electrical Conduit Locknut

015863095
K419-16: RNCC: 3 | RNVC: 9
LKNT-TYPE304-1NPT: RNCC: 5 | RNVC: 9

23 Jun 2010

5975-01-586-8618
Electrical Grounding Plate

015868618
3840479: RNCC: 3 | RNVC: 2
3840479: RNCC: 5 | RNVC: 9

16 Jul 2010

5975-01-587-4875
Electrical Equipment Mounting Base

015874875
4102435-501: RNCC: 3 | RNVC: 2

9 Aug 2010

5975-01-589-8025
Junction Box Cover

015898025
3854893: RNCC: 3 | RNVC: 2
3854893: RNCC: 5 | RNVC: 9

5 Nov 2010

5975-01-590-5254
Flexible Nonmetallic Conduit

015905254
4L79157-101A: RNCC: 3 | RNVC: 2

8 Dec 2010

5975-01-597-1384
Cable Hanger

015971384
03002A1793-1: RNCC: 3 | RNVC: 2

31 May 2011

5975-01-605-7461
Electrical Equipment Mounting Base

016057461
23172: RNCC: 3 | RNVC: 2

24 Apr 2012

5975-01-605-8203
Electronic Equipment Mounting Tray

016058203
3422-0002-03-1: RNCC: 3 | RNVC: 2

26 Apr 2012

5975-01-599-0223
Electrical Equipment Shelf

015990223
3978849: RNCC: 3 | RNVC: 2
3978849: RNCC: 5 | RNVC: 9

9 Sep 2011

5975-01-604-8304
Lug Boot

016048304
120808-A00: RNCC: 3 | RNVC: 2
120283ITEM100: RNCC: 5 | RNVC: 2

13 Apr 2012

5975-01-607-8858
Cable Hanger

016078858
NMC1005-3: RNCC: 3 | RNVC: 2

16 Jun 2012

5975-01-600-9710
Cable Marker Sleeve

016009710
VAL-VITON6: RNCC: 3 | RNVC: 2

4 Jan 2012

5975-01-602-9402
Electrical Equipment Mounting Base

016029402
68-08157-00: RNCC: 3 | RNVC: 2

14 Feb 2012

5975-01-610-0030
Flexible Metal Conduit Assembly

016100030
3260AS1328-44: RNCC: 3 | RNVC: 2

7 Aug 2012

5975-01-610-0680
Electrical Equipment Mounting Base

016100680
833HN262-1: RNCC: 3 | RNVC: 2

9 Aug 2012

5975-01-610-6329
Electrical-Electronic Equipment Chassis

016106329
40B160902-05: RNCC: 3 | RNVC: 2
40B160902-05: RNCC: 5 | RNVC: 2

23 Aug 2012

5975-01-612-8985
Electrical Wall Plate

016128985
C5080062: RNCC: 3 | RNVC: 2
3891592C1: RNCC: 5 | RNVC: 2
C5080062: RNCC: 5 | RNVC: 9

24 Oct 2012

5975-01-611-3688
Rigid Metal Conduit

016113688
75A337686-2003: RNCC: 3 | RNVC: 2
75A337686-2003: RNCC: 3 | RNVC: 9
75A337686-2003: RNCC: 5 | RNVC: 2

12 Sep 2012

5975-01-612-2617
Electrical-Electronic Equipment Panel

016122617
449-075-353-105: RNCC: 3 | RNVC: 2

5 Oct 2012

5975-01-611-0130
Rigid Nonmetallic Conduit

016110130
4G13059-103A: RNCC: 3 | RNVC: 2

4 Sep 2012

5975-01-614-5174
Electrical Wall Plate

016145174
11B3512701: RNCC: 3 | RNVC: 2

6 Dec 2012

5975-01-615-6826
Mounting Plate

016156826
041141: RNCC: 3 | RNVC: 2
041141: RNCC: 5 | RNVC: 2

18 Jan 2013

5975-01-616-4379
Electrical Equipment Cabinet

016164379
13530276-8: RNCC: 3 | RNVC: 2
340STDD5426ZX: RNCC: 3 | RNVC: 2
340STDD5426ZX: RNCC: 3 | RNVC: 2

13 Feb 2013

5975-01-617-1070
Flexible Nonmetallic Conduit

016171070
92N3680: RNCC: 3 | RNVC: 2

12 Mar 2013

5975-01-617-1074
Flexible Nonmetallic Conduit

016171074
92N3685: RNCC: 3 | RNVC: 2

12 Mar 2013

5975-01-617-8693
Cable Terminal Chamber

016178693
MSC2: RNCC: 3 | RNVC: 2

5 Apr 2013

5975-01-619-2842
Rail Guide.Electric Component Stop

016192842
PPI-43: RNCC: 3 | RNVC: 2

23 May 2013

5975-01-619-7339
Cable Hanger

016197339
200949462-03: RNCC: 3 | RNVC: 2

14 Jun 2013

5975-01-619-8586
Electrical Equipment Drawer

016198586
UD2: RNCC: 3 | RNVC: 2

20 Jun 2013

5975-01-620-1668
Cable Crosshead

016201668
FSTF0371: RNCC: 3 | RNVC: 2

5 Jul 2013

5975-01-631-6657
Electrical Components Tie Down Strap

016316657
70215K56: RNCC: 3 | RNVC: 2

22 Sep 2014

5975-01-632-1773
Junction Box

016321773
1414N4PHSSK6: RNCC: 3 | RNVC: 2
1414N4PHSSK6: RNCC: 5 | RNVC: 2

9 Oct 2014

5975-01-641-2150
Electrical Box Connector

016412150
VTM08-0011-2: RNCC: 3 | RNVC: 2

13 Jan 2015

5975-01-643-3543
Electronic Equipment Mounting Tray

016433543
ACC0070694: RNCC: 3 | RNVC: 2

30 Mar 2015

5975-01-643-5772
Rj45 Sfp Xciever

016435772
09205198-01: RNCC: 3 | RNVC: 2

7 Apr 2015

5975-01-644-1432
Electrical Box Connector

016441432
NMLT7: RNCC: 3 | RNVC: 2

22 Apr 2015

5975-01-644-7967
Electrical Box Connector

016447967
2932AL: RNCC: 3 | RNVC: 2

20 May 2015

5975-01-646-5187
Electrical-Electronic Equipment Chassis

016465187
CAP004290: RNCC: 3 | RNVC: 2
DCA101574 ITEM 3: RNCC: 5 | RNVC: 2
DCA101574: RNCC: D | RNVC: 9

22 Jul 2015

5975-01-649-4517
Electrical-Electronic Equipment Panel

016494517
04-20977: RNCC: 3 | RNVC: 2

29 Oct 2015

5975-01-609-9587
Flexible Metal Conduit Assembly

016099587
3260AS1328-16: RNCC: 3 | RNVC: 2

6 Aug 2012

5975-01-622-0127
Electrical Conduit Elbow

016220127
LT950P: RNCC: 3 | RNVC: 2
11B5091489: RNCC: 7 | RNVC: 2

25 Sep 2013

5975-01-623-6739
Cable Hanger

016236739
MM-50970: RNCC: 3 | RNVC: 2

25 Nov 2013

5975-01-624-3117
Electrical Conduit Bushing

016243117
J15B0012-4: RNCC: 3 | RNVC: 2

23 Dec 2013

5975-01-625-1467
Electrical Equipment Leg

016251467
11018G0327: RNCC: 3 | RNVC: 2

27 Jan 2014

5975-01-627-4677
Fiber Fabric Glass

016274677
BMS9-3TYDCL7: RNCC: 3 | RNVC: 2
BMS9-3TYDCL7: RNCC: 5 | RNVC: 2
BMS9-3TYDCL7: RNCC: 5 | RNVC: 2
BMS9-3TYDCL7: RNCC: 5 | RNVC: 2

15 Apr 2014

5975-01-628-3280
Electrical Equipment Mounting Base

016283280
901-031-363-127: RNCC: 3 | RNVC: 2

20 May 2014

5975-01-629-3956
Flexible Nonmetallic Conduit

016293956
SAE-AS81914/1: RNCC: 3 | RNVC: 1
M81914/1-1015: RNCC: 3 | RNVC: 2
M81914/1-1015: RNCC: 3 | RNVC: 9
M81914/1-1015: RNCC: 5 | RNVC: 9

27 Jun 2014

5975-01-630-8808
Flexible Nonmetallic Conduit

016308808
CLT38F-C20: RNCC: 3 | RNVC: 2

21 Aug 2014

5975-01-667-9389
Electrical-Electronic Equipment Chassis

016679389
252193: RNCC: 3 | RNVC: 9
MIL252193: RNCC: 5 | RNVC: 2

6 Nov 2017

5975-01-678-4239
Rigid Metal Conduit Assembly

016784239
2-60216-37: RNCC: 3 | RNVC: 2

6 Feb 2019

5975-01-679-9092
Electrical Wall Plate

016799092
930-49570: RNCC: 3 | RNVC: 2

15 Apr 2019

5975-01-681-5726
Junction Box Cover

016815726
7198 009 000: RNCC: 3 | RNVC: 2

24 Jun 2019

5975-01-681-3374
Electrical-Electronic Equipment Chassis

016813374
CB51923-001: RNCC: 3 | RNVC: 2
CB51923: RNCC: D | RNVC: 9

13 Jun 2019

5975-12-173-1201
Cable Marker Sleeve

121731201
0252601527: RNCC: 3 | RNVC: 2
405.11.0012: RNCC: 5 | RNVC: 2
2526.0-8: RNCC: 5 | RNVC: 9
25260-8SW: RNCC: 5 | RNVC: 9
2526-0-8: RNCC: 5 | RNVC: 9

20 Mar 1978

5975-12-313-1043
Electrical Conduit Bushing

123131043
167-12298: RNCC: 3 | RNVC: 2
1069642: RNCC: 5 | RNVC: 2

4 Mar 1988

5975-01-685-6720
Guide Rail

016856720
9265C52H02: RNCC: 3 | RNVC: 2

7 Jan 2020

5975-01-686-5322
Electrical Equipment Shelf

016865322
4354208: RNCC: 3 | RNVC: 2

21 Feb 2020

5975-01-686-6011
Electrical Components Tie Down Strap

016866011
S33000E-C01: RNCC: 3 | RNVC: 2
8605447-11: RNCC: 5 | RNVC: 2
8605447: RNCC: D | RNVC: 9

25 Feb 2020

5975-01-687-6437
Electrical-Electronic Equipment Chassis

016876437
25-75905-3: RNCC: 3 | RNVC: 2
25-75905: RNCC: D | RNVC: 9

10 Apr 2020

5975-01-686-9066
Electrical-Electronic Equipment Panel

016869066
730-0013: RNCC: 3 | RNVC: 2

10 Mar 2020

5975-01-650-0778
Conduit Outlet

016500778
479W3602-1: RNCC: 3 | RNVC: 2

18 Nov 2015

5975-01-651-6518
Interconnecting Box

016516518
EJ866: RNCC: 3 | RNVC: 2
HM415-ND: RNCC: 5 | RNVC: 9

26 Jan 2016

5975-01-652-0557
Electrical Conduit Wye

016520557
LN81010-15: RNCC: 3 | RNVC: 2
431-001NFA03B02C02: RNCC: 3 | RNVC: 2
431-001: RNCC: D | RNVC: 9

9 Feb 2016

5975-01-651-9804
Electrical Equipment Rack

016519804
7-611620011-101: RNCC: 3 | RNVC: 2

5 Feb 2016

5975-01-653-0612
Electronic Equipment Mounting Tray

016530612
2703-3900-505-101: RNCC: 3 | RNVC: 2

10 Mar 2016

5975-01-657-0529
Electrical Components Tie Down Strap

016570529
L-36-175-0-L: RNCC: 3 | RNVC: 2
L-36-175-0-L: RNCC: 5 | RNVC: 9

28 Jul 2016

5975-01-657-2669
Switch Terminal Cover

016572669
172522G1: RNCC: 3 | RNVC: 2

5 Aug 2016

5975-01-656-0371
Electrical Equipment Mounting Base

016560371
8940290-0001: RNCC: 3 | RNVC: 2
6B02955: RNCC: D | RNVC: 9

15 Jun 2016

5975-01-653-9409
Shop Set Installation Electrical Kit

016539409
59042-150573G4: RNCC: 3 | RNVC: 2
150573G4: RNCC: 5 | RNVC: 9
150573: RNCC: D | RNVC: 9

12 Apr 2016

5975-01-656-3987
Electrical Conduit Adapter

016563987
M24758-13B12: RNCC: 3 | RNVC: 2

29 Jun 2016

5975-01-661-8462
Electrical-Electronic Equipment Chassis

016618462
13623085: RNCC: 3 | RNVC: 2

17 Mar 2017

5975-01-662-6863
Mounting Plate

016626863
5543175: RNCC: 3 | RNVC: 2

17 Apr 2017

5975-01-663-0618
Electrical Equipment Shelf

016630618
65214-02013-045: RNCC: 3 | RNVC: 2
65214-02013-045: RNCC: 5 | RNVC: 2

25 Apr 2017

5975-01-665-0128
Flexible Metal Conduit

016650128
450206-0340: RNCC: 3 | RNVC: 2

14 Jul 2017

5975-01-665-7777
Switch Terminal Cover

016657777
MX1050S: RNCC: 3 | RNVC: 2

11 Aug 2017

5975-12-323-9435
Flexible Metal Conduit Assembly

123239435
115.02.0015: RNCC: 2 | RNVC: 2
115.02.0015: RNCC: 3 | RNVC: 2

10 Jan 1991

5975-20-008-0909
Stuffing Tube

200080909
154-68: RNCC: 3 | RNVC: 2

7 Nov 2013

5975-12-396-7858
Elec Tie Down Strap

5975-31-016-5118
Electrical- Chassis

5975-01-551-0942
Cable Hanger

015510942
M8010125: RNCC: 3 | RNVC: 2
M8010101ITEM6: RNCC: 5 | RNVC: 2

7 May 2007

5975-01-551-3820
Electrical Box Connector

015513820
KETOP CB211: RNCC: 3 | RNVC: 2
N260E002-IT47: RNCC: 5 | RNVC: 2

16 May 2007

5975-01-551-8219
Cable Hanger

015518219
TYUW10306C: RNCC: 3 | RNVC: 2
8H-A37559: RNCC: D | RNVC: 9

29 May 2007

5975-01-552-6938
Ground Rod Section

015526938
GRC-58: RNCC: 3 | RNVC: 2
311-58: RNCC: 3 | RNVC: 9

21 Jun 2007

5975-01-553-1636
Electrical-Electronic Equipment Chassis

015531636
PS315120-01: RNCC: 3 | RNVC: 9
PS315120-01: RNCC: C | RNVC: 1

10 Jul 2007

5975-01-553-9119
Switch Box Case

015539119
27001112: RNCC: 3 | RNVC: 2
27001112: RNCC: 5 | RNVC: 9

27 Jul 2007

5975-01-555-8272
Conduit Outlet

015558272
HBL520R9W: RNCC: 3 | RNVC: 2

14 Sep 2007

5975-01-556-4026
Electronic Equipment Mounting Tray

015564026
4284487: RNCC: 3 | RNVC: 2
4284487: RNCC: 5 | RNVC: 2

2 Oct 2007

5975-01-557-1888
Electrical Components Tie Down Strap

015571888
46-308UVB: RNCC: 3 | RNVC: 2
80005K51: RNCC: 5 | RNVC: 2
46-308UVB: RNCC: 5 | RNVC: 9

16 Oct 2007

5975-01-557-5998
Junction Box

015575998
R0081169: RNCC: 3 | RNVC: 2
R0081169: RNCC: 5 | RNVC: 2
R0081169-0107: RNCC: D | RNVC: 9

25 Oct 2007

5975-01-557-6326
Electrical Components Tie Down Strap

015576326
252-5955: RNCC: 3 | RNVC: 2
R0073113: RNCC: 5 | RNVC: 2
R0073113: RNCC: 7 | RNVC: 2
R0073113-0301: RNCC: D | RNVC: 9

25 Oct 2007

5975-01-559-1624
Electrical-Electronic Equipment Panel

015591624
319-5011: RNCC: 3 | RNVC: 2
300-5447: RNCC: 5 | RNVC: 9

7 Dec 2007

5975-01-559-0841
Electrical-Electronic Equipment Chassis

015590841
872827-1: RNCC: 3 | RNVC: 2
872827-1: RNCC: 5 | RNVC: 9

5 Dec 2007

5975-01-559-1914
Junction Box

015591914
364229: RNCC: 3 | RNVC: 2

7 Dec 2007

5975-01-559-0831
Electrical Conduit Adapter

015590831
CMC-CR-212-93W-9C: RNCC: 3 | RNVC: 2

5 Dec 2007

5975-01-556-7957
Junction Box

015567957
140-060XMS-01: RNCC: 3 | RNVC: 2

5 Oct 2007

5975-01-562-9701
Electrical Equipment Mounting Base

015629701
A3256624-1: RNCC: 3 | RNVC: 2
A3256624: RNCC: D | RNVC: 9

28 Apr 2008

5975-01-563-6938
Electrical Components Tie Down Strap

015636938
N-7-50-HAL: RNCC: 3 | RNVC: 2

19 May 2008

5975-01-564-1007
Flexible Metal Conduit Assembly

015641007
260A809-8: RNCC: 3 | RNVC: 2
740NC102NFH171H171-24-72: RNCC: 5 | RNVC: 2

4 Jun 2008

5975-01-566-0161
Junction Box

015660161
ZT104-120-18: RNCC: 3 | RNVC: 2

15 Aug 2008

5975-01-566-9228
Electrical Tie Down Mounting Base

015669228
ABM1M-AT: RNCC: 3 | RNVC: 2
93006A1561: RNCC: 7 | RNVC: 2

15 Sep 2008

5975-01-567-6730
Electrical Tie Down Mounting Base

015676730
VRTH-12-SA: RNCC: 3 | RNVC: 2
50N4898: RNCC: 5 | RNVC: 2

2 Oct 2008

5975-01-568-2736
Electrical Equipment Mounting Base

015682736
A3265968: RNCC: 3 | RNVC: 2

24 Oct 2008

5975-01-568-3146
Electrical-Electronic Equipment Chassis

015683146
1209-3101-PF: RNCC: 3 | RNVC: 2
1209-3101-PF: RNCC: 3 | RNVC: 9

27 Oct 2008

5975-01-577-2611
Electrical Equipment Mounting Base

015772611
540.01.0155: RNCC: 3 | RNVC: 2

1 Sep 2009

5975-01-577-3994
Electrical-Electronic Equipment Panel

015773994
3840401: RNCC: 3 | RNVC: 2
3840401: RNCC: 5 | RNVC: 9

3 Sep 2009

5975-01-576-9733
Electrical Equipment Shelf

015769733
3819830: RNCC: 3 | RNVC: 2
3819830: RNCC: 5 | RNVC: 9

20 Aug 2009

5975-01-579-7695
Electrical-Electronic Equipment Chassis

015797695
FPST1U: RNCC: 3 | RNVC: 2
07011A1180: RNCC: 7 | RNVC: 2

23 Nov 2009

5975-01-579-8156
Junction Box Cover

015798156
MRP22334: RNCC: 3 | RNVC: 2
MRP22334: RNCC: 5 | RNVC: 2

24 Nov 2009

5975-01-581-4743
Junction Box

015814743
1724863: RNCC: 3 | RNVC: 2

19 Jan 2010

5975-01-582-2356
Electrical Wall Plate

015822356
S1: RNCC: 3 | RNVC: 2

11 Feb 2010

5975-01-583-3775
Ground Rod

015833775
13162/4: RNCC: 3 | RNVC: 2
R1L-C-GR1: RNCC: 5 | RNVC: 2
R1L-C-GR1: RNCC: 5 | RNVC: 9

23 Mar 2010

5975-01-583-3845
Electrical-Electronic Equipment Chassis

015833845
450-075-521-117: RNCC: 3 | RNVC: 2

24 Mar 2010

5975-01-569-6063
Junction Box

015696063
63-0751-0001: RNCC: 3 | RNVC: 2

4 Dec 2008

5975-01-572-2537
Electrical Conduit Nipple

015722537
7513K58: RNCC: 3 | RNVC: 2
7513K58: RNCC: 5 | RNVC: 9

4 Mar 2009

5975-01-574-3976
Electrical-Electronic Equipment Chassis

015743976
04-9211-105: RNCC: 3 | RNVC: 2
9211-04-1006 ITEM-1: RNCC: 5 | RNVC: 2

27 May 2009

5975-01-575-4180
Cablet Base

015754180
MPNY-1000A-0-C: RNCC: 3 | RNVC: 2
3752801: RNCC: 5 | RNVC: 2

1 Jul 2009

5975-01-575-6573
Electrical Box Connector

015756573
SHC-1022ZP: RNCC: 3 | RNVC: 2
7529K23: RNCC: 5 | RNVC: 2

10 Jul 2009

5975-01-575-6581
Electrical Box Connector

015756581
SHC-1033ZP: RNCC: 3 | RNVC: 2
7529K26: RNCC: 5 | RNVC: 2

10 Jul 2009

5975-01-576-3798
Electrical Components Tie Down Strap

015763798
TYC DCT110HIR: RNCC: 3 | RNVC: 2
21087716: RNCC: 5 | RNVC: 2

29 Jul 2009

5975-01-576-7351
Electrical Equipment Rack

015767351
12505987-008: RNCC: 3 | RNVC: 2

12 Aug 2009

5975-01-591-4886
Defeator

015914886
199054-A00: RNCC: 3 | RNVC: 2

27 Jan 2011

5975-01-591-5052
Top Plate Assy

015915052
710232-K01: RNCC: 3 | RNVC: 2
71232-K01: RNCC: 5 | RNVC: 9

27 Jan 2011

5975-01-591-5724
Buffer Lever Assy

015915724
747018-K02: RNCC: 3 | RNVC: 2

31 Jan 2011

5975-01-591-5879
Panel Assy

015915879
748114-K01: RNCC: 3 | RNVC: 2

1 Feb 2011

5975-01-590-9798
Electrical Equipment Rack

015909798
10032655: RNCC: 3 | RNVC: 2

5 Jan 2011

5975-01-595-5716
Mounting Spacer

015955716
3092334: RNCC: 3 | RNVC: 2

2 May 2011

5975-01-596-0988
Electrical Tie Down Mounting Base

015960988
CB4020G5N6-750: RNCC: 3 | RNVC: 2

12 May 2011

5975-01-596-4858
Electrical Box Connector

015964858
7529K411: RNCC: 3 | RNVC: 2
7529K41: RNCC: 5 | RNVC: 9

18 May 2011

5975-01-596-1442
Electrical Equipment Rack

015961442
RF1620-19: RNCC: 3 | RNVC: 2

30 Apr 2012

5975-01-585-5626
Electrical Equipment Mounting Base

015855626
4102350-501: RNCC: 3 | RNVC: 2

27 May 2010

5975-01-586-6572
Conduit Outlet

015866572
7219K22: RNCC: 3 | RNVC: 2
7219K22: RNCC: 5 | RNVC: 9
15023 REV K PC NO 399: RNCC: 5 | RNVC: 9

8 Jul 2010

5975-01-588-2591
Stuffing Tube

015882591
41010905: RNCC: 3 | RNVC: 2

9 Sep 2010

5975-01-588-4065
Stuffing Tube Plug

015884065
41011021-101: RNCC: 3 | RNVC: 2

16 Sep 2010

5975-01-588-6525
Electrical Components Tie Down Strap

015886525
PLT4S-M30: RNCC: 3 | RNVC: 2
PLTS-M30: RNCC: 5 | RNVC: 9
04-21409: RNCC: 7 | RNVC: 2

28 Sep 2010

5975-01-589-3935
Electrical Equipment Mounting Base

015893935
987-5006-100: RNCC: 3 | RNVC: 2

25 Oct 2010

5975-01-590-0372
Electrical Cable Protector

015900372
52110006-01: RNCC: 3 | RNVC: 2

16 Nov 2010

5975-01-590-0835
Electrical Conduit Adapter

015900835
330HS001N1706-4: RNCC: 3 | RNVC: 2

17 Nov 2010

5975-01-590-5275
Flexible Nonmetallic Conduit

015905275
4L59106-101B: RNCC: 3 | RNVC: 2

8 Dec 2010

5975-01-590-6706
Electrical Conduit Elbow

015906706
A029N401: RNCC: 3 | RNVC: 2
SAEJ5144070221C: RNCC: 5 | RNVC: 2

15 Dec 2010

5975-01-590-5996
Electrical Components Tie Down Strap

015905996
L-24-120-9-L: RNCC: 3 | RNVC: 2
7130K922: RNCC: 5 | RNVC: 9

13 Dec 2010

5975-01-597-6577
Electrical-Electronic Equipment Panel

015976577
PBL-1: RNCC: 3 | RNVC: 9

20 Jun 2011

5975-01-605-1692
Electrical Nonmetallic Conduit Assembly

016051692
749-395-845-50: RNCC: 3 | RNVC: 2

16 Apr 2012

5975-01-601-8813
Electrical Adapter

016018813
133649-1: RNCC: 3 | RNVC: 2

26 Jan 2012

5975-01-603-2030
Rigid Metal Conduit

016032030
10130009: RNCC: 3 | RNVC: 2
10130009: RNCC: 5 | RNVC: 9

23 Feb 2012

5975-01-603-5801
Electrical Equipment Mounting Base

016035801
12516895: RNCC: 3 | RNVC: 2

7 Mar 2012

5975-01-603-7750
Electrical Equipment Mounting Base

016037750
08002B1150-2: RNCC: 3 | RNVC: 2
08002B1150: RNCC: 5 | RNVC: 9

15 Mar 2012

5975-01-603-9119
Cable Spacer

016039119
000-50059-0000: RNCC: 3 | RNVC: 2
000-50059-0000: RNCC: 5 | RNVC: 9

21 Mar 2012

5975-01-605-6114
Electrical Equipment Shelf

016056114
GEIR24SLF: RNCC: 3 | RNVC: 2

23 Apr 2012

5975-01-606-6134
Rigid Metal Conduit

016066134
T4G04103-103A: RNCC: 3 | RNVC: 2

22 May 2012

5975-01-610-1646
Electrical Special Purpose Cable

016101646
7011037-A03: RNCC: 3 | RNVC: 2

13 Aug 2012

5975-01-610-4871
Electrical Nonmetallic Conduit Assembly

016104871
3260AS1328-52: RNCC: 3 | RNVC: 2
749-844-52: RNCC: 5 | RNVC: 2

20 Aug 2012

5975-01-610-6179
Electrical Tie Down Mounting Base

016106179
200532050-1: RNCC: 3 | RNVC: 2
CB3019CRM5NB: RNCC: 3 | RNVC: 2

23 Aug 2012

5975-01-610-6324
Electrical-Electronic Equipment Chassis

016106324
40B160902-09: RNCC: 3 | RNVC: 2
40B160902-09: RNCC: 5 | RNVC: 2

23 Aug 2012

5975-01-610-6333
Electrical-Electronic Equipment Chassis

016106333
40B160902-01: RNCC: 3 | RNVC: 2
40B160902-01: RNCC: 5 | RNVC: 2

23 Aug 2012

5975-01-611-7015
Radio Frequency Cable Splicing Kit

016117015
10-06950: RNCC: 3 | RNVC: 2

24 Sep 2012

5975-01-612-0404
Electrical-Electronic Equipment Panel

016120404
106A0197: RNCC: 3 | RNVC: 2

2 Oct 2012

5975-01-612-2844
Insulator Bracket

016122844
13034031: RNCC: 3 | RNVC: 2

6 Oct 2012

5975-01-615-3924
Electrical Tie Down Mounting Base

016153924
STBP19M14: RNCC: 3 | RNVC: 2

10 Jan 2013

5975-01-609-8966
Electrical Equipment Mounting Base

016098966
168K227G02: RNCC: 3 | RNVC: 2
168K227G02: RNCC: 3 | RNVC: 2

6 Aug 2012

5975-01-616-2147
Electrical Cable Protector

016162147
11018G0097: RNCC: 3 | RNVC: 2
512847: RNCC: 5 | RNVC: 2

5 Feb 2013

5975-01-616-4594
Electrical Equipment Cabinet

016164594
175STDN5482ZX: RNCC: 3 | RNVC: 2
13530274-1: RNCC: 5 | RNVC: 9

14 Feb 2013

5975-01-617-1042
Electrical Components Tie Down Strap

016171042
18105-X: RNCC: 3 | RNVC: 2
18105-X: RNCC: 5 | RNVC: 2
10005960: RNCC: 5 | RNVC: 9
10005960: RNCC: 7 | RNVC: 2
S000193: RNCC: D | RNVC: 9

12 Mar 2013

5975-01-617-3769
Stuffing Tube

016173769
060FS0014: RNCC: 3 | RNVC: 9

20 Mar 2013

5975-01-618-3382
Tcdl Radome Kit Nrp

016183382
60096926-000: RNCC: 3 | RNVC: 2

21 Apr 2013

5975-01-618-4454
Electrical Cable Nipple

016184454
487N7V02: RNCC: 3 | RNVC: 2

24 Apr 2013

5975-01-642-7946
Cable Hanger

016427946
LR-19-2: RNCC: 3 | RNVC: 9
S-LR2-14-2: RNCC: D | RNVC: 9

10 Mar 2015

5975-01-643-7938
Electrical-Electronic Equipment Panel

016437938
FV29080G3: RNCC: 3 | RNVC: 2

13 Apr 2015

5975-01-645-5262
Electrical Wall Plate

016455262
TP7218: RNCC: 3 | RNVC: 2

19 Jun 2015

5975-01-646-5156
Electrical-Electronic Equipment Chassis

016465156
CAP004232: RNCC: 3 | RNVC: 2
DCA101574 ITEM 6: RNCC: 5 | RNVC: 2
DCA101574: RNCC: D | RNVC: 9

22 Jul 2015

5975-01-621-1247
Electronic Equipment Mounting Tray

016211247
948290-1: RNCC: 3 | RNVC: 2

23 Aug 2013

5975-01-621-3991
Electrical-Electronic Equipment Panel

016213991
06-1014-11736: RNCC: 3 | RNVC: 2
11466612-7: RNCC: 5 | RNVC: 2
11466612-7: RNCC: 5 | RNVC: 2
11466612-7: RNCC: 7 | RNVC: 1

5 Sep 2013

5975-01-621-9718
Rigid Nonmetallic Conduit

016219718
LTC050: RNCC: 3 | RNVC: 2
11B5091493: RNCC: 7 | RNVC: 2

24 Sep 2013

5975-01-622-5326
Line Supporting Strap

016225326
97403 13227E5821: RNCC: 3 | RNVC: 2
11B5091496: RNCC: 7 | RNVC: 2

10 Oct 2013

5975-01-623-4039
Cable Strain Relief Bushing

016234039
67616A-00: RNCC: 3 | RNVC: 2

13 Nov 2013

5975-01-624-2696
Electrical Equipment Rack

016242696
FFBAS0426: RNCC: 3 | RNVC: 2
TD-R 3X75R-17: RNCC: 5 | RNVC: 2

20 Dec 2013

5975-01-624-8029
Cable Strain Relief Bushing

016248029
074011233: RNCC: 3 | RNVC: 2
11A7000911: RNCC: 7 | RNVC: 2

15 Jan 2014

5975-01-625-6270
Junction Box

016256270
127: RNCC: 3 | RNVC: 2
11A7000872: RNCC: 7 | RNVC: 2

10 Feb 2014

5975-01-631-2243
Electronic Equipment Mounting Tray

016312243
13015514: RNCC: 3 | RNVC: 2

4 Sep 2014

5975-01-676-9852
Cable Strain Relief Bushing

016769852
M85049/139-12: RNCC: 3 | RNVC: 2
MIL-C-85049/A: RNCC: 5 | RNVC: 9

21 Nov 2018

5975-01-667-4476
Rigid Metal Conduit Assembly

016674476
CG90-2550: RNCC: 3 | RNVC: 2

17 Oct 2017

5975-01-669-4676
Cable Hanger

016694676
NMC1005-2: RNCC: 3 | RNVC: 1

9 Jan 2018

5975-01-681-5729
Flexible Metal Conduit Assembly

016815729
287A6212-7: RNCC: 3 | RNVC: 2

24 Jun 2019

5975-01-685-8657
Electrical Components Tie Down Strap

016858657
6A108: RNCC: 3 | RNVC: 2

17 Jan 2020

5975-01-685-9961
Electrical Equipment Mounting Base

016859961
501739: RNCC: 3 | RNVC: 2

24 Jan 2020

5975-01-686-6012
Electrical Components Tie Down Strap

016866012
520663Y-18: RNCC: 3 | RNVC: 2
8605446-4: RNCC: 5 | RNVC: 2
8605446: RNCC: D | RNVC: 9

25 Feb 2020

5975-01-689-9563
Cable Terminal Chamber

016899563
1833108: RNCC: 3 | RNVC: 2

17 Jul 2020

5975-01-690-5271
Electrical Tie Down Mounting Base

016905271
MBMS-S10-CY: RNCC: 3 | RNVC: 2

17 Aug 2020

5975-01-692-2189
Electrical Equipment Mounting Base

016922189
STBXBA3000: RNCC: 3 | RNVC: 2

30 Nov 2020

5975-01-696-3614
Electrical Equipment Leg

016963614
0195-1330-02: RNCC: 3 | RNVC: 2

22 Jul 2021

5975-01-694-2285
Electrical Cable Protector

016942285
5624301308S: RNCC: 3 | RNVC: 2
FMC-RNDEMIFS-013-21: RNCC: 3 | RNVC: 9

23 Mar 2021

5975-01-693-8786
Cable Marker Sleeve

016938786
SM3-23-1/2-WHITE: RNCC: 3 | RNVC: 2
1083023: RNCC: 5 | RNVC: 9

9 Mar 2021

5975-12-321-5160
Electrical Conduit Bushing

123215160
167-12169: RNCC: 3 | RNVC: 2

28 May 1990

5975-01-650-0393
Electrical Grounding Plate

016500393
232A9115-17: RNCC: 3 | RNVC: 2

18 Nov 2015

5975-01-650-5657
Cable Collar

016505657
13055559: RNCC: 3 | RNVC: 2

9 Dec 2015

5975-01-651-5428
Mounting Plate

016515428
3528AS175-01: RNCC: 3 | RNVC: 2
3528AS175-01: RNCC: 5 | RNVC: 2

22 Jan 2016

5975-01-651-9045
Flexible Nonmetallic Conduit

016519045
R58HB45B72W048: RNCC: 3 | RNVC: 2
R58HB45B72W048: RNCC: 5 | RNVC: 2
R58HB45B72W048: RNCC: 5 | RNVC: 2

3 Feb 2016

5975-01-655-1568
Box Ground Rod Acce

016551568
HRG-GAW121212HD: RNCC: 3 | RNVC: 2

19 May 2016

5975-01-654-6165
Flexible Nonmetallic Conduit

016546165
3006118: RNCC: 3 | RNVC: 2
0714001: RNCC: 5 | RNVC: 2

4 May 2016

5975-01-657-6002
Mounting Plate

016576002
987-0002-325: RNCC: 3 | RNVC: 2
987-0002-325: RNCC: 5 | RNVC: 9

22 Aug 2016

5975-01-658-8981
Electrical Entrance Cap Shell

016588981
1611AS12910: RNCC: 3 | RNVC: 2

25 Oct 2016

5975-01-659-8400
Electrical Wall Plate

016598400
97401: RNCC: 3 | RNVC: 2

19 Dec 2016

5975-01-659-8151
Electrical-Electronic Equipment Panel

016598151
C7S-3: RNCC: 3 | RNVC: 2

16 Dec 2016

5975-01-663-0617
Electrical Equipment Shelf

016630617
65214-02017-043: RNCC: 3 | RNVC: 2
65214-02017-043: RNCC: 5 | RNVC: 2

25 Apr 2017

5975-14-541-1245
Electrical Equipment Mounting Base

145411245
4351412: RNCC: 3 | RNVC: 2

14 May 2004

5975-21-909-7785
Electrical-Electronic Equipment Chassis

219097785
542-601143-000: RNCC: 3 | RNVC: 2

28 Mar 1992

5975-99-974-3557
Interconnecting Box

999743557
G406/8606: RNCC: 3 | RNVC: 2

26 Sep 2002

5975-99-679-7936
Stuffing Tube

996797936
RM15W40: RNCC: 3 | RNVC: 2
DRAWING:S1000426: RNCC: 5 | RNVC: 1
012WX-022: RNCC: 6 | RNVC: 9

26 Nov 2001

5975-01-600-3914
Junction Box Cover

016003914
3886409: RNCC: 3 | RNVC: 2
3886409: RNCC: 5 | RNVC: 9

27 Nov 2011

5975-01-607-3282
Electrical Cable Protector

016073282
3701665C1: RNCC: 3 | RNVC: 2

8 Jun 2012

5975-01-607-9757
Stuffing Tube

016079757
JET714: RNCC: 3 | RNVC: 2
JET714: RNCC: 5 | RNVC: 2

19 Jun 2012

5975-01-616-1667
Electrical Grounding Plate

016161667
13029429: RNCC: 3 | RNVC: 2

4 Feb 2013

5975-01-681-2106
Strain Electrical Conductor Clamp

016812106
718665: RNCC: 3 | RNVC: 2
13744564: RNCC: 7 | RNVC: 2

10 Jun 2019

5975-01-669-9070
Electrical-Electronic Equipment Chassis

016699070
8512-7302-9500: RNCC: 3 | RNVC: 2

26 Jan 2018

5975-01-671-6139
Cable Hanger

016716139
A17-19848-000: RNCC: 3 | RNVC: 2
A17-19848: RNCC: D | RNVC: 9

4 Apr 2018

5975-01-672-6122
Transmission Line Grounding Set

016726122
2680: RNCC: 3 | RNVC: 9
2680-ES: RNCC: 5 | RNVC: 2
2680: RNCC: 5 | RNVC: 9

9 May 2018

5975-01-673-7686
Electrical Components Tie Down Strap

016737686
AL-ACTPAC-400-0: RNCC: 3 | RNVC: 2
7338K36: RNCC: 3 | RNVC: 9
7338K36: RNCC: 5 | RNVC: 2

26 Jun 2018

5975-01-673-8552
Transmission Line Grounding Set

016738552
101172: RNCC: 3 | RNVC: 2
09023A0201: RNCC: 5 | RNVC: 2

29 Jun 2018

5975-01-656-6493
Electrical Cable Protector

016566493
3400F171-01: RNCC: 3 | RNVC: 2
3400F171: RNCC: D | RNVC: 9

13 Jul 2016

5975-12-323-9436
Flexible Metal Conduit Assembly

123239436
115.02.0017: RNCC: 2 | RNVC: 2
115.02.0017: RNCC: 3 | RNVC: 2

10 Jan 1991

5975-22-610-9476
Stuffing Tube

226109476
R000001001021: RNCC: 3 | RNVC: 2

8 Jul 2005

5975-01-689-9577
Cable Terminal Chamber

016899577
1827842: RNCC: 3 | RNVC: 2

17 Jul 2020

5975-20-008-3017
Elect Mounting Base

5975-01-551-0958
Cable Hanger

015510958
M8010124: RNCC: 3 | RNVC: 2
M8010101ITEM5: RNCC: 5 | RNVC: 2

7 May 2007

5975-01-551-1118
Cable Hanger

015511118
M8010208: RNCC: 3 | RNVC: 2
M8010200ITEM4: RNCC: 5 | RNVC: 2

8 May 2007

5975-01-551-7437
Cable Hanger

015517437
TYUW10308A: RNCC: 3 | RNVC: 2
8H-A33358: RNCC: D | RNVC: 9

24 May 2007

5975-01-552-7365
Electrical Conduit Coupling

015527365
CMC-422-96W: RNCC: 3 | RNVC: 2

22 Jun 2007

5975-01-552-7467
Strain Electrical Conductor Clamp

015527467
30-302-2D10G12: RNCC: 3 | RNVC: 2

22 Jun 2007

5975-01-553-1661
Electrical Cable Nipple

015531661
BJ2848: RNCC: 3 | RNVC: 2
921962: RNCC: 5 | RNVC: 2

10 Jul 2007

5975-01-553-4071
Electrical Grounding Plate

015534071
12049-0068-A1: RNCC: 3 | RNVC: 2

16 Jul 2007

5975-01-553-7846
Ground Rod

015537846
S583: RNCC: 3 | RNVC: 2
S583: RNCC: 3 | RNVC: 9

25 Jul 2007

5975-01-554-1023
Electrical-Electronic Equipment Chassis

015541023
46019612: RNCC: 3 | RNVC: 2
46019612: RNCC: 5 | RNVC: 9

30 Jul 2007

5975-01-554-6088
Blank Panel

015546088
25159354: RNCC: 3 | RNVC: 2
60QE 36M: RNCC: 5 | RNVC: 9
10000326: RNCC: 5 | RNVC: 9

15 Aug 2007

5975-01-554-6445
A Rectangular Clamp

015546445
30-302-2D17J07: RNCC: 3 | RNVC: 2
30-302-2D17J07: RNCC: 5 | RNVC: 2
30-302-2D17J07: RNCC: 5 | RNVC: 2
30-302-2D17J07: RNCC: 5 | RNVC: 2
30-302-2D17J07: RNCC: 5 | RNVC: 2

16 Aug 2007

5975-01-555-9762
Cable Collar

015559762
BB-F20-15KW: RNCC: 3 | RNVC: 2

19 Sep 2007

5975-01-556-0530
Electrical Cable Protector

015560530
BB5-125-T: RNCC: 3 | RNVC: 9
BB5-125-T: RNCC: 5 | RNVC: 9

21 Sep 2007

5975-01-556-3496
Electrical Equipment Rack

015563496
889509-2: RNCC: 3 | RNVC: 2
889509-1: RNCC: 5 | RNVC: 2
889509-1: RNCC: 5 | RNVC: 2
889509-1: RNCC: 5 | RNVC: 2

2 Oct 2007

5975-01-556-5910
Electrical Components Tie Down Strap

015565910
BT105R: RNCC: 3 | RNVC: 2
3530605C2: RNCC: 5 | RNVC: 2
3530605C2: RNCC: 5 | RNVC: 2
3530605C1: RNCC: 5 | RNVC: 9
3530605C1: RNCC: 5 | RNVC: 9
BT105RP: RNCC: 5 | RNVC: 9
CT05-046-007CST: RNCC: D | RNVC: 9

3 Oct 2007

5975-01-556-6189
Flexible Nonmetallic Conduit

015566189
3577746C1: RNCC: 3 | RNVC: 2
3577746C1: RNCC: 7 | RNVC: 2

3 Oct 2007

5975-01-557-0975
Electrical Equipment Rack

015570975
10002232: RNCC: 3 | RNVC: 2
4007648: RNCC: 5 | RNVC: 9

11 Oct 2007

5975-01-557-6300
Electrical Components Tie Down Strap

015576300
404 550: RNCC: 3 | RNVC: 2
R0073112: RNCC: 5 | RNVC: 2
252-5949: RNCC: 5 | RNVC: 9
R0073112: RNCC: 7 | RNVC: 2
R0073112-0301: RNCC: D | RNVC: 9

25 Oct 2007

5975-01-557-6280
Electrical Components Tie Down Strap

015576280
252-5961: RNCC: 3 | RNVC: 2
R0073114: RNCC: 5 | RNVC: 2
R0073114: RNCC: 7 | RNVC: 2
R0073114-0301: RNCC: D | RNVC: 9

25 Oct 2007

5975-01-558-5108
Junction Box

015585108
3MSG223082401: RNCC: 3 | RNVC: 2

13 Nov 2007

5975-01-558-9833
Rigid Metal Conduit

015589833
A-A-50553-12L202A: RNCC: 2 | RNVC: 2
AA50553: RNCC: 4 | RNVC: 1

3 Dec 2007

5975-01-560-7501
Junction Box

015607501
70550-02416-041: RNCC: 3 | RNVC: 2

11 Feb 2008

5975-01-563-2989
Conduit Outlet

015632989
GF15GYL: RNCC: 3 | RNVC: 2

7 May 2008

5975-01-563-9506
Metallic Raceway Assembly

015639506
6037175: RNCC: 3 | RNVC: 2

30 May 2008

5975-01-565-6203
Flexible Nonmetallic Conduit

015656203
796AX12F: RNCC: 3 | RNVC: 2
10025958: RNCC: 5 | RNVC: 2

31 Jul 2008

5975-01-568-1256
Blank Panel

015681256
19C336871P3: RNCC: 3 | RNVC: 2

21 Oct 2008

5975-01-568-1950
Blank Panel

015681950
P-1210: RNCC: 3 | RNVC: 2
P-1210: RNCC: 3 | RNVC: 9
63-0782-0005: RNCC: 5 | RNVC: 2

22 Oct 2008

5975-01-567-8275
Blank Panel

015678275
SXA 214 0975/1: RNCC: 3 | RNVC: 2

8 Oct 2008

5975-01-568-5900
Electrical Equipment Rack

015685900
3831779C92L: RNCC: 3 | RNVC: 2
3831779C91L: RNCC: 5 | RNVC: 9
3831779C92: RNCC: 5 | RNVC: 9

4 Nov 2008

5975-01-568-9302
Junction Box Cover

015689302
9955.0044: RNCC: 3 | RNVC: 2

13 Nov 2008

5975-01-569-0308
Junction Box

015690308
12727542: RNCC: 3 | RNVC: 2
BP560-6290: RNCC: 5 | RNVC: 9

18 Nov 2008

5975-01-579-5099
Electrical Cable Assembly Protector

015795099
PC-10 (350-35.84): RNCC: 3 | RNVC: 2
NYLATRAC MODEL PC-10 (350): RNCC: 5 | RNVC: 9

16 Nov 2009

5975-01-580-4996
Electrical Components Tie Down Strap

015804996
63124: RNCC: 3 | RNVC: 2
63124: RNCC: 3 | RNVC: 2
0311193: RNCC: 5 | RNVC: 2
2608592C1: RNCC: 5 | RNVC: 2
10010747: RNCC: 5 | RNVC: 9
10010747: RNCC: 7 | RNVC: 2
12759-00936: RNCC: C | RNVC: 1
S000193: RNCC: D | RNVC: 9

16 Dec 2009

5975-01-581-8557
Junction Box

015818557
VW3CANTAP2: RNCC: 3 | RNVC: 2

29 Jan 2010

5975-01-583-6046
Electrical Equipment Leg

015836046
3861223: RNCC: 3 | RNVC: 2
3861223: RNCC: 5 | RNVC: 9

30 Mar 2010

5975-01-584-0317
2 Cndctr Trmnl Blk

015840317
280-901: RNCC: 3 | RNVC: 9
MP10097/8101 REV K ITEM 01-30-2: RNCC: 5 | RNVC: 9

15 Apr 2010

5975-01-570-3730
Electrical Box Connector

015703730
R0056932: RNCC: 3 | RNVC: 2
R0056932: RNCC: 5 | RNVC: 2
R0056932-0301: RNCC: D | RNVC: 9

24 Dec 2008

5975-01-572-3833
Electrical Components Tie Down Strap

015723833
AL06-18-0: RNCC: 3 | RNVC: 2
7130K42: RNCC: 5 | RNVC: 2

10 Mar 2009

5975-01-573-1613
Electrical Equipment Rack

015731613
7652101-1: RNCC: 1 | RNVC: 2
S38739-A: RNCC: 3 | RNVC: 2
7652101: RNCC: D | RNVC: 9

9 Apr 2009

5975-01-573-2149
Electrical Conduit Locknut

015732149
L-200: RNCC: 3 | RNVC: 2
L-200: RNCC: 5 | RNVC: 2

13 Apr 2009

5975-01-573-1866
Electrical Cable Nipple

015731866
202D121-25-0: RNCC: 3 | RNVC: 2

10 Apr 2009

5975-01-574-4393
Junction Box

015744393
232: RNCC: 3 | RNVC: 2
71695K13: RNCC: 5 | RNVC: 2

28 May 2009

5975-01-575-2835
Electrical Components Tie Down Strap

015752835
0098951: RNCC: 3 | RNVC: 2
0098951: RNCC: 5 | RNVC: 2
0098951-FH00-001: RNCC: D | RNVC: 9

25 Jun 2009

5975-01-575-1728
Flexible Metal Conduit Assembly

015751728
4B69143-105A: RNCC: 3 | RNVC: 2

23 Jun 2009

5975-01-577-0433
Electrical Equipment Rack

015770433
5136L005-2: RNCC: 3 | RNVC: 2

24 Aug 2009

5975-01-591-0817
Electrical Nonmetallic Conduit Assembly

015910817
749-080: RNCC: 3 | RNVC: 2
23A02069: RNCC: 3 | RNVC: 2
23A02089: RNCC: 5 | RNVC: 9
13425168: RNCC: 7 | RNVC: 2

10 Jan 2011

5975-01-589-8569
Electrical Conduit Adapter

015898569
TX-41-AB00-1418-H: RNCC: 3 | RNVC: 2

6 Nov 2010

5975-01-591-8608
Electrical Cable Nipple

015918608
90-115-2: RNCC: 3 | RNVC: 2

14 Feb 2011

5975-01-591-5069
Crank Arm Assy

015915069
746998-K01: RNCC: 3 | RNVC: 2

27 Jan 2011

5975-01-593-6393
Electrical Box Connector

015936393
NC-302: RNCC: 3 | RNVC: 2

13 Apr 2011

5975-01-591-7009
Electrical-Electronic Equipment Panel

015917009
28023-320-0222/RS(A04): RNCC: 3 | RNVC: 2
28023-320-0222 REV C: RNCC: 5 | RNVC: 2

4 Feb 2011

5975-01-593-9290
Flexible Nonmetallic Conduit

015939290
8068K32: RNCC: 3 | RNVC: 2

21 Apr 2011

5975-01-595-3489
Electrical Conduit Adapter

015953489
6293E59-ITEM11: RNCC: 3 | RNVC: 2
FT-11-BK: RNCC: 5 | RNVC: 2

26 Apr 2011

5975-01-596-6886
Electrical Grounding Plate

015966886
03002A1840-19: RNCC: 3 | RNVC: 2

23 May 2011

5975-01-596-7351
Electrical Grounding Plate

015967351
03002A1840-21: RNCC: 3 | RNVC: 2

24 May 2011

5975-01-585-5336
Electrical Equipment Mounting Base

015855336
622-7825-003: RNCC: 3 | RNVC: 2
622-7825-003: RNCC: 5 | RNVC: 2
622-7825-003: RNCC: 5 | RNVC: 9

27 May 2010

5975-01-586-8620
Electrical Grounding Plate

015868620
3841123: RNCC: 3 | RNVC: 2
3841123: RNCC: 5 | RNVC: 9

16 Jul 2010

5975-01-588-4141
Stuffing Tube

015884141
41010958: RNCC: 3 | RNVC: 2

16 Sep 2010

5975-01-590-0822
Flexible Nonmetallic Conduit

015900822
LCN-1625-150: RNCC: 3 | RNVC: 2
3436866: RNCC: 5 | RNVC: 2
3436866: RNCC: 5 | RNVC: 9

17 Nov 2010

5975-01-596-7912
Junction Box

015967912
71695K41: RNCC: 3 | RNVC: 2
71695K41: RNCC: 3 | RNVC: 9
71695K41: RNCC: 5 | RNVC: 2

25 May 2011

5975-01-597-1463
Electrical Grounding Plate

015971463
03002A1840-10: RNCC: 3 | RNVC: 2

31 May 2011

5975-01-597-9189
Junction Box

015979189
JB-E: RNCC: 3 | RNVC: 2

22 Jun 2011

5975-01-602-8650
Electrical Grounding Plate

016028650
176622-1: RNCC: 3 | RNVC: 2
176622-1: RNCC: 5 | RNVC: 2

10 Feb 2012

5975-01-600-7937
Bridle Ring

016007937
82-2812161-1: RNCC: 3 | RNVC: 2
82-2812161-1: RNCC: 5 | RNVC: 9

19 Dec 2011

5975-01-601-7684
Cable Hanger

016017684
14016-G: RNCC: 3 | RNVC: 2
14016: RNCC: 5 | RNVC: 2
55331-14: RNCC: 5 | RNVC: 2
23KP936: RNCC: 5 | RNVC: 2
23KP936: RNCC: 5 | RNVC: 9

24 Jan 2012

5975-01-601-8786
Electrical Box Connector

016018786
3807: RNCC: 3 | RNVC: 2
9767: RNCC: 5 | RNVC: 2

26 Jan 2012

5975-01-608-6755
Conduit Outlet

016086755
C5080061: RNCC: 3 | RNVC: 2
3114613C1: RNCC: 5 | RNVC: 2

6 Jul 2012

5975-01-608-6950
Stuffing Tube

016086950
2AJG12028: RNCC: 3 | RNVC: 2
2AJG12028: RNCC: 3 | RNVC: 9

9 Jul 2012

5975-01-608-6932
Conduit Outlet Cover

016086932
2AAT12096: RNCC: 3 | RNVC: 2
2AAT12096: RNCC: 3 | RNVC: 9

9 Jul 2012

5975-01-609-2498
Rigid Metal Conduit

016092498
4G13111-103A: RNCC: 3 | RNVC: 9

20 Jul 2012

5975-01-609-2522
Rigid Metal Conduit

016092522
4G14177-103A: RNCC: 3 | RNVC: 2

20 Jul 2012

5975-01-609-9488
Ac Power Harnes Nrp

016099488
3392AS1868: RNCC: 3 | RNVC: 2
3392AS1868: RNCC: 5 | RNVC: 2

6 Aug 2012

5975-01-609-9707
Transmission Line Grounding Set

016099707
ALS-2-6CC: RNCC: 3 | RNVC: 2

6 Aug 2012

5975-01-610-2908
Electrical Cable Protector

016102908
71625: RNCC: 3 | RNVC: 2

14 Aug 2012

5975-01-609-9873
Junction Box

016099873
28-6228: RNCC: 3 | RNVC: 2

7 Aug 2012

5975-01-612-2979
Cable Hanger

016122979
AS23190/1: RNCC: 3 | RNVC: 1
M23190/1-4: RNCC: 3 | RNVC: 2
M23190/1-4: RNCC: 5 | RNVC: 9
AS23190/1: RNCC: 5 | RNVC: 9
M23190/1-4: RNCC: 5 | RNVC: 9

9 Oct 2012

5975-01-614-5556
Strain Electrical Conductor Clamp

016145556
2DPE6: RNCC: 3 | RNVC: 2
11B3512724: RNCC: 5 | RNVC: 2

7 Dec 2012

5975-01-615-7903
Interconnecting Box Cover

016157903
120-09796-0001: RNCC: 3 | RNVC: 2

23 Jan 2013

5975-01-617-0166
Electrical Conduit Coupling

016170166
230-DC2: RNCC: 3 | RNVC: 2
7150K74: RNCC: 3 | RNVC: 9
230-DC2: RNCC: 5 | RNVC: 9

7 Mar 2013

5975-01-616-7154
Electrical Components Tie Down Strap

016167154
T50I0M4: RNCC: 3 | RNVC: 2
T50I0M4: RNCC: 3 | RNVC: 9
OJJM: RNCC: 5 | RNVC: 2

25 Feb 2013

5975-01-616-2143
Electrical Cable Protector

016162143
11018G0100: RNCC: 3 | RNVC: 2
512846: RNCC: 5 | RNVC: 2

5 Feb 2013

Load More Results