What is Federal Supply Class 5975?

FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.

What is NATO Supply Classification Class 5975?

NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.

Which Federal Supply Group is FSC 5975 in?

FSC 5975 is in Federal Supply Group (FSG) 59 which contains Electrical and Electronic Equipment Components.

Which NATO Supply Classification Group is NSC 5975 in?

NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains Electrical and Electronic Equipment Components.

What is an Electrical Cable Protector?

An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.

What is a Ground Rod?

A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.

What is a Junction Box Assembly?

A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.

What is a Flexible Metal Conduit Assembly?

A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).

What is a Fanning Strip?

A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).

A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.

What is a Switch Terminal Cover?

A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.

What is a Cable Terminal Chamber?

A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.

What is a Stuffing Tube?

A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).

What is a Cord Assembly Fastener?

A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.

What is an Electrical Grounding Plate?

An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.

What is a Cable Collar?

A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.

What is a Crossarm Brace?

A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.

What is a Cable Hanger?

A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.

What is an Insulator Pin?

An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.

What is a Stuffing Tube Plug?

A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.

What is an Electrical Cable Support?

An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.

What is an Electrical Conductor Bushing?

An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.

What is an Insulator Bracket?

An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.

What is a Cable Reinforcing Link?

A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.

What is a Stuffing Tube Adapter?

A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.

What is a Junction Box?

A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.

What is an Electrical Cable Nipple?

An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.

What is an Electrical Equipment Cabinet?

An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.

What is an Electrical Equipment Rack?

An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.

What is an Electrical Entrance Cap?

An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.

What is an Electrical Conduit Adapter?

An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.

What is an Electrical Conduit Sealing Fitting?

An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.

What is a Knockout Reducing Washer?

A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.

What is an Electrical Conduit Nipple?

An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.

What is an Electrical Entrance Elbow?

An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.

What is an Electrical Conduit Bushing?

An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.

What is an Electrical Conduit Bondnut?

An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Union?

An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.

What is an Electrical Conduit Elbow?

An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.

What is a Conduit Outlet?

A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.

What is an Electrical Conduit Bend?

An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.

What is an Electrical Wall Plate?

An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.

What is an Interconnecting Box?

An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

What is an Electrical Rosette?

An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.

A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.

What is an Underground Cable Rack?

An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.

What is an Interior Cable Rack?

An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.

What is an Electrical Conduit Ferrule?

An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.

What is an Underground Cable Rack Hook?

An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.

What is an Electrical Conduit End Seal Disk?

An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.

What is a Cable Spacer?

A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

Page 100 of 491

NSN Format for Electrical Hardware and Supplies

59	75	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Additional Information for Electrical Hardware and Supplies

NATO Supply Class 5975 is a classification within NATO Supply Group 59, which is dedicated to Electrical and Electronic Equipment Components.

NATO Supply Class 5975 specifically focuses on Electrical Hardware and Supplies. This class includes a wide range of items such as electrical connectors, terminals, switches, circuit breakers, fuses, relays, cables, wires, and other related electrical components and accessories.

The purpose of this classification is to provide a standardized system for categorizing and organizing electrical hardware and supplies used in military and defense applications. By using this classification system, NATO member countries can easily identify, procure, and maintain the necessary electrical components for their equipment and systems.

It is important to note that the NATO Supply Classification (NSC) system is used primarily by NATO member countries for logistical and supply chain management purposes. It helps ensure interoperability and compatibility among different military forces by providing a common language for identifying and categorizing various items.

If you are working on a document related to electrical hardware and supplies in the context of NATO Supply Class 5975, you may want to include specific details about the types of components and their applications within military and defense systems. Additionally, you can mention the importance of adhering to the NATO Supply Classification system for efficient procurement and maintenance processes.

NSN by Country

US
United States
87946 Items

FR
France
48173 Items

UK
United Kingdom
41042 Items

DE
Germany
16258 Items

AU
Australia
3850 Items

TR
Turkey
3697 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?: FSC 5975 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?: NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?: FSC 5975 is in Federal Supply Group(FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?: NSC 5975 is in NATO Supply Classification Group(NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1795 Items: An Electrical Cable Protector (PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 897 Items: A Ground Rod (ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 341 Items: A Junction Box Assembly is two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1996 Items: A Flexible Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 442 Items: A Fanning Strip is an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 80 Items: A Pothead is a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
Cover,Interconnecting Box 193 Items
What is a Switch Terminal Cover? 269 Items: A Switch Terminal Cover (COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 831 Items: A Cable Terminal Chamber (CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 6447 Items: A Stuffing Tube is an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 122 Items: A Cord Assembly Fastener (FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 1028 Items: An Electrical Grounding Plate (PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 579 Items: A Cable Collar (COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
Base,Chassis 634 Items
What is a Crossarm Brace? 76 Items: A Crossarm Brace (BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2248 Items: A Cable Hanger (HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 73 Items: An Insulator Pin (PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 318 Items: A Stuffing Tube Plug (PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 387 Items: An Electrical Cable Support (SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 933 Items: An Electrical Conductor Bushing (BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 216 Items: An Insulator Bracket (BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items: A Cable Reinforcing Link (LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 342 Items: A Stuffing Tube Adapter (ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 7327 Items: A Junction Box is an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1901 Items: An Electrical Cable Nipple (CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6697 Items: An Electrical Equipment Cabinet (CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 11023 Items: An Electrical Equipment Rack (RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 117 Items: An Electrical Entrance Cap (ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 3285 Items: An Electrical Conduit Adapter (ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 89 Items: An Electrical Conduit Sealing Fitting (SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 72 Items: A Knockout Reducing Washer (REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 411 Items: An Electrical Conduit Nipple (NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 65 Items: An Electrical Entrance Elbow (ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 595 Items: An Electrical Conduit Bushing (BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 63 Items: An Electrical Conduit Bondnut (BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 211 Items: An Electrical Conduit Union (UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 676 Items: An Electrical Conduit Elbow (ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1948 Items: A Conduit Outlet is an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 295 Items: An Electrical Conduit Bend (BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1347 Items: An Electrical Wall Plate (PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2771 Items: An Interconnecting Box is an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 52 Items: An Electrical Rosette (ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 24 Items: A Pole Step (STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 15 Items: An Underground Cable Rack (RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 607 Items: An Interior Cable Rack (RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 638 Items: An Electrical Conduit Ferrule (FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 15 Items: An Underground Cable Rack Hook (HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 47 Items: An Electrical Conduit End Seal Disk (DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 136 Items: A Cable Spacer (SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2425 Items: An Electrical Box Connector (BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 754 Items: An Electrical Conduit Coupling (COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 231 Items: An Electrical Conduit Wye (WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 72 Items: A Cable Rack Extension (EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 214 Items: An Electrical Bonding Ring (RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 379 Items: An Electrical Equipment Rack Base (BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 83 Items: An Electrical Cable Splice Protector (PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 407 Items: An Electrical Conduit Coupling Nut (NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 27 Items: An Insulator Bracket Strap (STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1522 Items: A Junction Box Cover (COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 42 Items: A Wire Strand Hanger (HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 21 Items: An Electrical Conduit Cross (CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 222 Items: An Electrical Conduit Tee (TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 4132 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
Case,Electrical Equipment Cabinet 266 Items
Case,Switch Box 257 Items
What is a Ground Rod Section? 51 Items: A Ground Rod Section (ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 100 Items: A Junction Box Extension (EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 659 Items: A Stuffing Tube Packing Nut (PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 11 Items: A Wire Strand Hanger Safety Strap (STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 15 Items: A Wire Strand Hanger Support Strap (STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Wire Strand Hanger Support And Safety Strap? 10 Items: A Wire Strand Hanger Support And Safety Strap (STRAP,SUPPORT AND SAFETY,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of a cable suspension clamp bolt by providing a linkage from the bolt end to the supporting member and is also extended below the suspension bolt to form a loop or guard to support the cable should a messenger fail.
What is a Transmission Line Grounding Set? 93 Items: A Transmission Line Grounding Set (GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 14550 Items: A Cable Marker Sleeve (SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 488 Items: An Electrical Standardized Components Case (CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 39 Items: An Electrical Conduit Ferrule-Nut Coupling (FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 591 Items: A Strain Electrical Conductor Clamp (CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 25 Items: An Electrical Entrance Cap Shell (SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 1053 Items: A Flexible Metal Conduit (CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 1092 Items: A Rigid Metal Conduit (CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 447 Items: A Rigid Nonmetallic Conduit (CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 71 Items: A Radio Frequency Cable Splicing Kit (SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 52 Items: A Drive Ring is a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 19 Items: A Bridle Ring is a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 344 Items: An Electrical Equipment Leg (LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 136 Items: An Electrical Equipment Leg Section (LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 187 Items: A Conduit Chase Nipple (CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 544 Items: A Cable Strain Relief Bushing (BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1804 Items: An Electrical Nonmetallic Conduit Assembly (CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 646 Items: A Conduit Outlet Cover (COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 69 Items: An Electrical Conduit Coupling Nut Clamp (CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1361 Items: An Electrical Equipment Shelf (SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 52 Items: A Shop Set Installation Electrical Kit (ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 57 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 578 Items: An Electrical Conduit Locknut (LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1829 Items: A Flexible Nonmetallic Conduit (CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3863 Items: An Electrical Equipment Drawer (DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9977 Items: An Electrical Equipment Mounting Base (MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 1015 Items: An Electronic Junction Rack (RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 24 Items: A Safety Shorting Probe (PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 1059 Items: An Electrical Tie Down Mounting Base (MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 604 Items: A Raceway Cover (COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
Raceway,Metallic 1703 Items
Raceway,Nonmetallic 1114 Items
What is an Electrical-Electronic Equipment Panel? 9842 Items: An Electrical-Electronic Equipment Panel (PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 175 Items: An Electric Cable Joint Box (JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 30 Items: An Electric Cable Joint Box Supplementary Equipment (SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 11812 Items: An Electrical-Electronic Equipment Chassis (CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 270 Items: A Raceway Elbow (ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 387 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 33 Items: An Electrical Conduit Ferrule Anchor Plate (ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 197 Items: A Nonmetallic Raceway Assembly (RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 458 Items: A Metallic Raceway Assembly (RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items: A Cable Crosshead (CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 32 Items: An Electrical Box Sealing Flange (FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 78 Items: An Electrical Box Entry Flange (FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 24 Items: An Electrical Box Adapter Flange (FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 62 Items: An Electrical Box Divider (DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 278 Items: An Electrical Equipment Foot (FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items: An Electrical Standardized Components Case Section (CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 844 Items: A Guide Rail (RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 2123 Items: An Electronic Equipment Mounting Tray (TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 36 Items: An Electrical Conductor Protector (PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 275 Items: An Electrical Fitting Mounting Base (BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items: An Aircraft Equipment Quick Disconnect Handle (HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 849 Items: A Rigid Metal Conduit Assembly (CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 273 Items: An Interconnecting Cabinet is an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 213 Items: An Electrical Cable Assembly Protector (PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 4157 Items: An Electrical Components Tie Down Strap (STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 28 Items: An Electric Component Rail Guide Stop (STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 12 Items: A Raceway End Cap (END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 23 Items: An Electrical Cable Ground Guard (GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975 Page 100of 491

5975-01-648-4309
Electrical Equipment Mounting Base

016484309
8522103: RNCC: 3 | RNVC: 2

24 Sep 2015

5975-01-621-3445
Electrical Components Tie Down Strap

016213445
BACS38K5: RNCC: 3 | RNVC: 2
BACS38K5: RNCC: 5 | RNVC: 2
BACS38K5: RNCC: 5 | RNVC: 2

4 Sep 2013

5975-01-623-1875
Electrical Cable Protector

016231875
12545577: RNCC: 3 | RNVC: 2

4 Nov 2013

5975-01-625-1516
Cable Marker Sleeve

016251516
S100X225YAJ: RNCC: 3 | RNVC: 2
516958-3: RNCC: 7 | RNVC: 2
516958: RNCC: D | RNVC: 9

27 Jan 2014

5975-01-624-4471
Blank Panel

016244471
4079389-0501: RNCC: 3 | RNVC: 2

2 Jan 2014

5975-01-625-7397
Electrical Cable Protector

016257397
12023A7001: RNCC: 3 | RNVC: 2

13 Feb 2014

5975-01-628-0949
Interconnecting Box Cover

016280949
8330-G501: RNCC: 3 | RNVC: 2
8454-G501ITEM3: RNCC: 5 | RNVC: 2

8 May 2014

5975-01-630-9157
Electrical Cable Nipple

016309157
15324973: RNCC: 3 | RNVC: 2
12048086: RNCC: 5 | RNVC: 9

22 Aug 2014

5975-01-678-0802
Electrical Equipment Mounting Base

016780802
12172-1600-03: RNCC: 3 | RNVC: 2
12172-1600-03: RNCC: 3 | RNVC: 9

18 Jan 2019

5975-01-667-4248
Junction Box

016674248
9003-1: RNCC: 3 | RNVC: 2

17 Oct 2017

5975-01-667-8324
Blank Panel

016678324
246628: RNCC: 3 | RNVC: 9
MIL246628: RNCC: 5 | RNVC: 2

1 Nov 2017

5975-01-668-4731
Electrical Wall Plate

016684731
AL3346G: RNCC: 3 | RNVC: 2

24 Nov 2017

5975-01-671-2156
Mounting Plate

016712156
704AS4061: RNCC: 3 | RNVC: 2
704AS4061: RNCC: 5 | RNVC: 2

20 Mar 2018

5975-01-670-0025
Electrical Equipment Rack

016700025
SRC2541B: RNCC: 3 | RNVC: 2

31 Jan 2018

5975-01-669-5179
Mounting Plate

016695179
13716232: RNCC: 3 | RNVC: 2

10 Jan 2018

5975-01-672-2953
Electrical-Electronic Equipment Panel

016722953
530-000256-001: RNCC: 3 | RNVC: 2
530-000256-001: RNCC: 5 | RNVC: 2

26 Apr 2018

5975-01-674-1015
Electrical Cable Protector

016741015
12546116: RNCC: 3 | RNVC: 2

12 Jul 2018

5975-12-173-1193
Cable Marker Sleeve

121731193
0252601643: RNCC: 3 | RNVC: 2
405.11.0014: RNCC: 5 | RNVC: 2
25260-0SW: RNCC: 5 | RNVC: 9
2526-0-0: RNCC: 5 | RNVC: 9
2526.0-D: RNCC: 5 | RNVC: 9

20 Mar 1978

5975-12-196-2228
Stuffing Tube

121962228
490.01.0009: RNCC: 2 | RNVC: 2
DIN89280-K24-Z10-S2NI: RNCC: 2 | RNVC: 2
186PG16-Z10A: RNCC: 3 | RNVC: 2
HUGRO 129.2410.8: RNCC: 5 | RNVC: 2
490.01.0009: RNCC: 5 | RNVC: 2
KVM24-Z10A: RNCC: 5 | RNVC: 9
DIN89280-KM24X1,5-Z10: RNCC: 5 | RNVC: 9
DIN89280-KM24X1,5Z10: RNCC: 5 | RNVC: 9
KM24X1,5DIN89280-Z10: RNCC: 5 | RNVC: 9

14 Jun 1983

5975-01-652-9831
Electrical Wall Plate

016529831
800-011279-1: RNCC: 3 | RNVC: 1

9 Mar 2016

5975-01-653-9114
Cable Marker Sleeve

016539114
PSHT-375-1-WT: RNCC: 3 | RNVC: 2

11 Apr 2016

5975-01-654-0822
Electrical Equipment Foot

016540822
452.2-25-13-1/4-55: RNCC: 3 | RNVC: 2

18 Apr 2016

5975-01-657-4473
Electrical Conduit Adapter

016574473
M24758-4BL: RNCC: 3 | RNVC: 2

15 Aug 2016

5975-01-657-6891
Electrical Components Tie Down Strap

016576891
WBW25STTRC-VTD: RNCC: 3 | RNVC: 2

25 Aug 2016

5975-01-660-1305
Electrical-Electronic Equipment Panel

016601305
04-21279: RNCC: 3 | RNVC: 2
04-21279: RNCC: 3 | RNVC: 9
A029Y674: RNCC: 5 | RNVC: 2

6 Jan 2017

5975-01-660-5868
Cable Hanger

016605868
808-7069263-WW-0057: RNCC: 3 | RNVC: 2
302-8543641ITEM 30: RNCC: 5 | RNVC: 2

25 Jan 2017

5975-01-661-1984
Conduit Outlet Cover

016611984
217-7324506ITEM69: RNCC: 1 | RNVC: 2
390G: RNCC: 3 | RNVC: 2

22 Feb 2017

5975-01-661-7298
Interconnecting Box

016617298
81793F01: RNCC: 3 | RNVC: 2
81793002: RNCC: 5 | RNVC: 9
81793001: RNCC: 5 | RNVC: 9
4325492: RNCC: 7 | RNVC: 2

14 Mar 2017

5975-01-665-7952
Electrical Equipment Mounting Base

016657952
410-113-186: RNCC: 3 | RNVC: 2

14 Aug 2017

5975-12-196-6091
Electrical Tie Down Mounting Base

121966091
151-11319: RNCC: 3 | RNVC: 2
12H4750: RNCC: 5 | RNVC: 2
VFN22414-4: RNCC: 5 | RNVC: 2
TY3-G1S: RNCC: 5 | RNVC: 2
435.07.0017: RNCC: 5 | RNVC: 2
SK00100: RNCC: 5 | RNVC: 2
2410 5300: RNCC: 5 | RNVC: 9

25 Jul 1983

5975-14-478-8388
Electrical Conduit Locknut

144788388
44036532: RNCC: 3 | RNVC: 2
44036532: RNCC: 5 | RNVC: 2
44036532: RNCC: 5 | RNVC: 9

23 Nov 1995

5975-99-917-0775
Sp Chassis Assembly

999170775
0464-0030: RNCC: 3 | RNVC: 2
464-030: RNCC: 5 | RNVC: 2
0030: RNCC: 6 | RNVC: 9

25 Apr 1991

5975-01-690-4506
Electrical-Electronic Equipment Panel

016904506
930-31382: RNCC: 3 | RNVC: 2

12 Aug 2020

5975-01-693-8813
Cable Marker Sleeve

016938813
SM3-23-1/2-BLACK: RNCC: 3 | RNVC: 2
1083023: RNCC: 5 | RNVC: 9

9 Mar 2021

5975-01-694-2537
Electrical Equipment Rack

016942537
505M/0141: RNCC: 3 | RNVC: 2

24 Mar 2021

5975-01-685-3824
Cable Marker Sleeve

016853824
TMS-SCE-2X-3/8-4: RNCC: 3 | RNVC: 2
C-MDC160002: RNCC: D | RNVC: 9

13 Dec 2019

5975-12-395-7205
Junction Box Cover

5975-01-576-6130
Electrical Equipment Rack

015766130
4284561: RNCC: 3 | RNVC: 2
4284561: RNCC: 5 | RNVC: 2

7 Aug 2009

5975-01-576-8268
Electrical Equipment Rack

015768268
12505987-010: RNCC: 3 | RNVC: 2
12505987-010: RNCC: 5 | RNVC: 2

17 Aug 2009

5975-01-576-8301
Electrical Equipment Rack

015768301
12505987-012: RNCC: 3 | RNVC: 2

17 Aug 2009

5975-01-596-1327
Nonmetallic Raceway

015961327
2009MK5E-01-010: RNCC: 3 | RNVC: 2

12 May 2011

5975-01-597-1636
Electrical Equipment Rack

015971636
34190A: RNCC: 3 | RNVC: 2
34190A: RNCC: 3 | RNVC: 9

31 May 2011

5975-01-598-5681
Flexible Metal Conduit

015985681
600232-3: RNCC: 3 | RNVC: 2
FF-18502PC19: RNCC: 5 | RNVC: 2

12 Aug 2011

5975-01-607-2018
Flexible Nonmetallic Conduit

016072018
7609K401: RNCC: 3 | RNVC: 2

5 Jun 2012

5975-01-606-6142
Rigid Metal Conduit

016066142
T4G04103-111A: RNCC: 3 | RNVC: 2

22 May 2012

5975-01-600-2810
Electrical Conductor Bushing

016002810
10008788: RNCC: 1 | RNVC: 2
2922NM: RNCC: 3 | RNVC: 2

21 Nov 2011

5975-01-608-3688
Electrical Equipment Mounting Base

016083688
901-060-335-106: RNCC: 3 | RNVC: 2

25 Jun 2012

5975-01-666-3424
Electrical Conduit Coupling Nut Clamp

016663424
MC-046516: RNCC: 3 | RNVC: 2
97-3899ITEM208: RNCC: 5 | RNVC: 2
97-3899: RNCC: D | RNVC: 9

1 Sep 2017

5975-01-666-8028
Metal Sleeve

016668028
506-BSN14: RNCC: 3 | RNVC: 2

21 Sep 2017

5975-01-666-9181
Cable Strain Relief Bushing

016669181
M3200: RNCC: 3 | RNVC: 2

26 Sep 2017

5975-12-173-1197
Cable Marker Sleeve

121731197
0252601514: RNCC: 3 | RNVC: 2
405.11.0008: RNCC: 5 | RNVC: 2
2526.0-4: RNCC: 5 | RNVC: 9
25260-4SW: RNCC: 5 | RNVC: 9
2526-0-4: RNCC: 5 | RNVC: 9

20 Mar 1978

5975-01-667-7677
Electrical Conduit Elbow

016677677
01D3174H03: RNCC: 1 | RNVC: 2
M24758-4 C: RNCC: 3 | RNVC: 2

30 Oct 2017

5975-12-173-1198
Cable Marker Sleeve

121731198
0252601518: RNCC: 3 | RNVC: 2
405.11.0009: RNCC: 5 | RNVC: 2
2526.0-5: RNCC: 5 | RNVC: 9
25260-5SW: RNCC: 5 | RNVC: 9
2526-0-5: RNCC: 5 | RNVC: 9

20 Mar 1978

5975-12-334-1325
Electrical Components Tie Down Strap

123341325
0139 5055: RNCC: 3 | RNVC: 2
4784449: RNCC: 5 | RNVC: 2

23 Mar 1994

5975-12-391-0283
Junction Box

123910283
XAC A03: RNCC: 3 | RNVC: 2

16 Jan 2013

5975-20-008-0908
Stuffing Tube

200080908
154-67: RNCC: 3 | RNVC: 2

7 Nov 2013

5975-21-910-4487
Metallic Raceway

219104487
10504547: RNCC: 3 | RNVC: 2

8 May 1993

5975-99-257-8788
Electrical Cable Protector

992578788
75A787089-2001: RNCC: 3 | RNVC: 2
75A787089-2001: RNCC: 5 | RNVC: 9

25 Jan 1995

5975-99-570-0281
Stuffing Tube

995700281
RM40/10-32: RNCC: 3 | RNVC: 2
DRAWING:S1001215: RNCC: 5 | RNVC: 1
012WX-027: RNCC: 6 | RNVC: 9

26 Nov 2001

5975-01-670-0209
Mounting Plate

016700209
RDQUICKRLSE: RNCC: 3 | RNVC: 9
B06Y62W1KG: RNCC: 5 | RNVC: 9
A3380534 ITEM 35: RNCC: C | RNVC: 1

1 Feb 2018

5975-01-681-3143
Electrical Wall Plate

016813143
10023: RNCC: 3 | RNVC: 2
845-4687686 ITEM 24-3: RNCC: C | RNVC: 1
845-4687686: RNCC: D | RNVC: 9

12 Jun 2019

5975-01-667-8033
Electrical-Electronic Equipment Chassis

016678033
252177: RNCC: 3 | RNVC: 9
MIL252177: RNCC: 5 | RNVC: 2

31 Oct 2017

5975-01-660-1686
Electrical Components Tie Down Strap

016601686
SS7070B0588: RNCC: 3 | RNVC: 2

9 Jan 2017

5975-01-661-5391
Electrical Tie Down Mounting Base

016615391
71-513365-1: RNCC: 1 | RNVC: 2
08461: RNCC: 3 | RNVC: 2
71-513365-1: RNCC: 5 | RNVC: 9

7 Mar 2017

5975-01-661-6174
Electrical-Electronic Equipment Panel

016616174
0405-9334: RNCC: 3 | RNVC: 2
04-21285: RNCC: 7 | RNVC: 2

9 Mar 2017

5975-01-663-6870
Electrical-Electronic Equipment Chassis

016636870
11472583-1: RNCC: 3 | RNVC: 2
11472583-1: RNCC: 3 | RNVC: 9
11472583: RNCC: 7 | RNVC: 2

18 May 2017

5975-01-650-2628
Couple Mount Assy

016502628
7-511113601-101: RNCC: 3 | RNVC: 2

24 Nov 2015

5975-01-650-5379
Electrical Wall Plate

016505379
CCB: RNCC: 3 | RNVC: 2

8 Dec 2015

5975-01-651-6637
Electronic Equipment Mounting Tray

016516637
901-370-345-763: RNCC: 3 | RNVC: 2

26 Jan 2016

5975-01-651-9770
Line Supporting Strap

016519770
601-040: RNCC: 3 | RNVC: 2

5 Feb 2016

5975-01-652-1361
Metallic Raceway

016521361
4043179C1: RNCC: 3 | RNVC: 2

10 Feb 2016

5975-01-652-0839
Electrical Cable Protector

016520839
12584373: RNCC: 3 | RNVC: 2

9 Feb 2016

5975-01-652-8278
Switch Terminal Cover

016528278
411T1124-22B: RNCC: 3 | RNVC: 1

5 Mar 2016

5975-01-652-6795
Electrical Tie Down Mounting Base

016526795
ABM100-AT-C0: RNCC: 3 | RNVC: 2
MB4A0A2H4: RNCC: 3 | RNVC: 2
17-3-4131-1: RNCC: 7 | RNVC: 2

1 Mar 2016

5975-01-652-0842
Electrical Equipment Rack Base

016520842
12584390: RNCC: 3 | RNVC: 2

9 Feb 2016

5975-01-653-2192
Electrical Components Tie Down Strap

016532192
635745680: RNCC: 3 | RNVC: 2
3895T12: RNCC: 5 | RNVC: 2
9752-0056: RNCC: 7 | RNVC: 2

15 Mar 2016

5975-01-674-9218
Blank Panel

016749218
FP1902U: RNCC: 3 | RNVC: 2

15 Aug 2018

5975-01-543-9015
Strain Electrical Conductor Clamp

015439015
30-302-2D10G08: RNCC: 3 | RNVC: 2

25 Sep 2006

5975-01-553-2120
Electrical Tie Down Mounting Base

015532120
21677-0770: RNCC: 3 | RNVC: 9

10 Jul 2007

5975-01-553-4151
Junction Box

015534151
11058-5200-01: RNCC: 3 | RNVC: 2
79L0059-00: RNCC: 3 | RNVC: 2

16 Jul 2007

5975-01-553-9485
Electrical-Electronic Equipment Chassis

015539485
42240712: RNCC: 3 | RNVC: 2
42240712: RNCC: 5 | RNVC: 9

27 Jul 2007

5975-01-554-6835
Electrical-Electronic Equipment Panel

015546835
GW 1124-01: RNCC: 3 | RNVC: 2

16 Aug 2007

5975-01-555-1269
Electrical-Electronic Equipment Panel

015551269
04-0150-001: RNCC: 3 | RNVC: 2
BPMI07-5051-01: RNCC: 5 | RNVC: 2

30 Aug 2007

5975-01-554-8015
Electrical Components Tie Down Strap

015548015
18106: RNCC: 3 | RNVC: 2
18106-6: RNCC: 5 | RNVC: 9
3003385: RNCC: 7 | RNVC: 2

20 Aug 2007

5975-01-555-8280
Cable Collar

015558280
BB-A40-1001: RNCC: 3 | RNVC: 2

14 Sep 2007

5975-01-556-3662
Electrical Wall Plate

015563662
4287375: RNCC: 3 | RNVC: 2
4287375: RNCC: 5 | RNVC: 2

2 Oct 2007

5975-01-557-0996
Flexible Nonmetallic Conduit

015570996
0708160: RNCC: 3 | RNVC: 2
12759-00699: RNCC: C | RNVC: 1

11 Oct 2007

5975-01-557-4825
Cable Hanger

015574825
7607321-0026: RNCC: 3 | RNVC: 2
200-8180879 ITEM 12: RNCC: 5 | RNVC: 1
200-7607321 ITEM 26: RNCC: 5 | RNVC: 2

24 Oct 2007

5975-01-557-4048
Rigid Metal Conduit

015574048
31169-1482: RNCC: 3 | RNVC: 2

22 Oct 2007

5975-01-558-9835
Rigid Metal Conduit

015589835
A-A-50553-12P202A: RNCC: 2 | RNVC: 2
A-A-50553-12M202A: RNCC: 5 | RNVC: 9

3 Dec 2007

5975-01-559-3094
Insulator Pin

015593094
7002748-1: RNCC: 3 | RNVC: 9
7002748-1: RNCC: 5 | RNVC: 9

12 Dec 2007

5975-01-559-3505
Insulator Pin

015593505
7002750-1: RNCC: 3 | RNVC: 2

13 Dec 2007

5975-01-560-0871
Electrical Components Tie Down Strap

015600871
SAE-AS23190: RNCC: 3 | RNVC: 1
AS33671-1-0: RNCC: 3 | RNVC: 2
AS33671-1-0: RNCC: 3 | RNVC: 9

15 Jan 2008

5975-01-562-9699
Blank Panel

015629699
A3256632-1: RNCC: 3 | RNVC: 2
A3256632: RNCC: D | RNVC: 9

28 Apr 2008

5975-01-563-0146
Ground Rod

015630146
A3020618-001: RNCC: 3 | RNVC: 2

29 Apr 2008

5975-01-563-3002
Metallic Raceway

015633002
13014404: RNCC: 3 | RNVC: 2
456720102007: RNCC: 6 | RNVC: 9

7 May 2008

5975-01-565-0381
Electrical Fitting Mounting Base

015650381
12-10609M: RNCC: 3 | RNVC: 2

9 Jul 2008

5975-01-565-2174
Electrical-Electronic Equipment Chassis

015652174
70902-01133-041: RNCC: 3 | RNVC: 2

16 Jul 2008

5975-01-565-2841
Electrical Box Connector

015652841
10B7965: RNCC: 3 | RNVC: 2
1682180000: RNCC: 3 | RNVC: 9
7709E95: RNCC: 5 | RNVC: 1

18 Jul 2008

5975-01-566-0826
Electrical Equipment Rack Base

015660826
1756-A10/B: RNCC: 3 | RNVC: 2
015654: RNCC: 5 | RNVC: 2
7709E62-ITEM78: RNCC: 5 | RNVC: 2

19 Aug 2008

5975-01-576-7250
Electrical Equipment Rack

015767250
12505987-003: RNCC: 3 | RNVC: 2

12 Aug 2009

5975-01-577-7246
Electrical Wall Plate

015777246
10002186: RNCC: 3 | RNVC: 2

16 Sep 2009

5975-01-581-6701
Electrical Grounding Plate

015816701
03002A1800-1: RNCC: 3 | RNVC: 2

25 Jan 2010

5975-01-583-6019
Electrical Equipment Leg

015836019
3861222: RNCC: 3 | RNVC: 2
3861222: RNCC: 5 | RNVC: 9

30 Mar 2010

5975-01-584-4246
Electrical Grounding Plate

015844246
2107: RNCC: 3 | RNVC: 9
10003040: RNCC: 5 | RNVC: 2
2107: RNCC: 5 | RNVC: 2

26 Apr 2010

5975-01-573-3557
Electrical Wall Plate

015733557
ECP001: RNCC: 3 | RNVC: 2

17 Apr 2009

5975-01-572-2530
Flexible Nonmetallic Conduit

015722530
8C-5064: RNCC: 3 | RNVC: 2
8KP117: RNCC: 5 | RNVC: 2
8C-5064: RNCC: 5 | RNVC: 9
8KP117: RNCC: 5 | RNVC: 9

4 Mar 2009

5975-01-572-3044
Electrical Cable Assembly Protector

015723044
1452190W: RNCC: 3 | RNVC: 2
1452190W: RNCC: 5 | RNVC: 9

5 Mar 2009

5975-01-568-5165
Flexible Nonmetallic Conduit

015685165
13213028-1: RNCC: 3 | RNVC: 2

3 Nov 2008

5975-01-571-4416
Cable Marker Sleeve

015714416
SS7074-4558: RNCC: 3 | RNVC: 2
SS7074-4558: RNCC: 5 | RNVC: 2
SS7074: RNCC: D | RNVC: 9

4 Feb 2009

5975-01-569-5301
Electrical Wall Plate

015695301
63-0343: RNCC: 3 | RNVC: 2

3 Dec 2008

5975-01-568-6076
Metallic Raceway

015686076
3689937C2L: RNCC: 3 | RNVC: 2

4 Nov 2008

5975-01-576-6186
Blank Panel

015766186
PBPA19007BK2: RNCC: 3 | RNVC: 2
0210551 REV B FIND 5: RNCC: 5 | RNVC: 9

10 Aug 2009

5975-01-593-9046
Electrical-Electronic Equipment Chassis

015939046
269A274-1: RNCC: 3 | RNVC: 2

21 Apr 2011

5975-01-595-5003
Electrical Tie Down Mounting Base

015955003
CB4020G3N8-750: RNCC: 3 | RNVC: 2

29 Apr 2011

5975-01-596-0987
Electrical Tie Down Mounting Base

015960987
CB4020G3N16-750: RNCC: 3 | RNVC: 2

12 May 2011

5975-01-595-5767
Electrical Components Tie Down Strap

015955767
71295K64-GREEN: RNCC: 3 | RNVC: 2

2 May 2011

5975-01-593-8710
Ground Rod Section

015938710
LPIAHS0257: RNCC: 3 | RNVC: 2
LPIAHS0257: RNCC: 5 | RNVC: 9

20 Apr 2011

5975-01-596-6896
Metallic Raceway

015966896
12517978: RNCC: 3 | RNVC: 2
12517978: RNCC: 5 | RNVC: 2

23 May 2011

5975-01-596-6919
Electrical Grounding Plate

015966919
03002A1800-3: RNCC: 3 | RNVC: 2

23 May 2011

5975-01-586-0412
Electrical Components Tie Down Strap

015860412
10015282: RNCC: 1 | RNVC: 2
CBR1M-MO: RNCC: 3 | RNVC: 2
10015282: RNCC: 5 | RNVC: 1

16 Jun 2010

5975-01-586-4149
Electrical Grounding Plate

015864149
PK32DGTA: RNCC: 3 | RNVC: 2

28 Jun 2010

5975-01-588-4134
Seat And Gland Assy

015884134
41011009-101: RNCC: 3 | RNVC: 2

16 Sep 2010

5975-01-586-6059
Junction Box

015866059
6XC79: RNCC: 3 | RNVC: 2
6XC79: RNCC: 5 | RNVC: 9

7 Jul 2010

5975-01-588-4471
Electrical Tie Down Mounting Base

015884471
CB4020G5N6: RNCC: 3 | RNVC: 2

18 Sep 2010

5975-01-588-6583
Insulator Bracket Strap

015886583
12490050: RNCC: 3 | RNVC: 2

28 Sep 2010

5975-01-588-6872
Wiring Compressor Kit

015886872
76-00355-00: RNCC: 3 | RNVC: 2

29 Sep 2010

5975-01-589-6272
Electrical Grounding Plate

015896272
3898193: RNCC: 3 | RNVC: 2
3898193: RNCC: 5 | RNVC: 9

1 Nov 2010

5975-01-589-8177
Electrical Conduit Locknut

015898177
A-A-50553-III-P-02-A: RNCC: 2 | RNVC: 2
A-A-50553: RNCC: 4 | RNVC: 1

5 Nov 2010

5975-01-596-7384
Electrical Grounding Plate

015967384
03002A1840-25: RNCC: 3 | RNVC: 2

24 May 2011

5975-01-605-0818
Rigid Metal Conduit

016050818
T4G04103-121A: RNCC: 3 | RNVC: 2

16 Apr 2012

5975-01-605-1597
Electrical Wall Plate

016051597
5730-0: RNCC: 3 | RNVC: 2

16 Apr 2012

5975-01-605-6686
Flexible Metal Conduit Assembly

016056686
3-74623: RNCC: 3 | RNVC: 2

23 Apr 2012

5975-01-607-8101
Junction Box

016078101
775-34514-107: RNCC: 3 | RNVC: 2

14 Jun 2012

5975-01-599-0225
Electrical Equipment Shelf

015990225
3978847: RNCC: 3 | RNVC: 2
3978847: RNCC: 5 | RNVC: 9

9 Sep 2011

5975-01-599-1121
Electrical Equipment Mounting Base

015991121
257A655-3: RNCC: 3 | RNVC: 2
123SCAV7703-11: RNCC: 5 | RNVC: 9
123SCAV7703-11: RNCC: C | RNVC: 1

13 Sep 2011

5975-01-607-9765
Stuffing Tube

016079765
JEK714: RNCC: 3 | RNVC: 2

19 Jun 2012

5975-01-600-9715
Cable Marker Sleeve

016009715
VAS-VITON6: RNCC: 3 | RNVC: 2

4 Jan 2012

5975-01-608-5694
Electrical Wall Plate

016085694
901-075-670-103: RNCC: 3 | RNVC: 2

2 Jul 2012

5975-01-609-8541
Flexible Metal Conduit Assembly

016098541
4G14262-101A: RNCC: 3 | RNVC: 2

4 Aug 2012

5975-01-609-8968
Electrical Equipment Mounting Base

016098968
168K239G01: RNCC: 3 | RNVC: 2

6 Aug 2012

5975-01-609-9575
Flexible Metal Conduit Assembly

016099575
3260AS1328-21: RNCC: 3 | RNVC: 2

6 Aug 2012

5975-01-610-0136
Electrical Equipment Mounting Base

016100136
833HN252-1: RNCC: 3 | RNVC: 2

8 Aug 2012

5975-01-610-1549
Flexible Metal Conduit Assembly

016101549
3260AS1328-62: RNCC: 3 | RNVC: 2
749-844-62: RNCC: 3 | RNVC: 2

10 Aug 2012

5975-01-610-1648
Electrical Special Purpose Cable

016101648
7011037-B04: RNCC: 3 | RNVC: 2

13 Aug 2012

5975-01-610-6036
Electrical Cable Protector

016106036
12084193: RNCC: 3 | RNVC: 9
12084193: RNCC: 5 | RNVC: 2
12084193: RNCC: 5 | RNVC: 2
55002904: RNCC: 7 | RNVC: 2

23 Aug 2012

5975-01-611-4574
Metallic Raceway

016114574
106A0377-4: RNCC: 3 | RNVC: 2

14 Sep 2012

5975-01-611-6228
Electrical Components Tie Down Strap

016116228
GSI15-006-20B-.25: RNCC: 3 | RNVC: 2
087-021526-0006: RNCC: 5 | RNVC: 9
GSI15-006-20B-.25: RNCC: 5 | RNVC: 9
087-021526-0006: RNCC: 7 | RNVC: 2
087-021526: RNCC: D | RNVC: 9

20 Sep 2012

5975-01-610-6720
Electrical Nonmetallic Conduit Assembly

016106720
3260AS1328-18: RNCC: 1 | RNVC: 2
749-844-18: RNCC: 3 | RNVC: 2
3260AS1328: RNCC: D | RNVC: 9

24 Aug 2012

5975-01-612-2836
Strain Electrical Conductor Clamp

016122836
13029288: RNCC: 3 | RNVC: 2

6 Oct 2012

5975-01-612-0869
Electrical Cable Protector

016120869
12522633: RNCC: 3 | RNVC: 2

2 Oct 2012

5975-01-612-9487
Electrical Equipment Rack

016129487
866013-1: RNCC: 3 | RNVC: 2
866013-1: RNCC: 5 | RNVC: 2

25 Oct 2012

5975-01-615-1344
Electrical Equipment Mounting Base

016151344
A1-39021D: RNCC: 3 | RNVC: 2

31 Dec 2012

5975-01-616-1369
Junction Box

016161369
V5744S-2: RNCC: 3 | RNVC: 2
08018B4019: RNCC: 7 | RNVC: 2

4 Feb 2013

5975-01-616-2168
Electrical Cable Protector

016162168
513096: RNCC: 3 | RNVC: 2

5 Feb 2013

5975-01-617-1069
Flexible Nonmetallic Conduit

016171069
92N3683: RNCC: 3 | RNVC: 2

12 Mar 2013

5975-01-617-3142
Cable Marker Sleeve

016173142
TMS-SCE-1K-3/16-2.0-4: RNCC: 3 | RNVC: 2

19 Mar 2013

5975-01-617-6299
Junction Box Assembly

016176299
2AJG12091: RNCC: 3 | RNVC: 2
2AJG12091: RNCC: 3 | RNVC: 9

28 Mar 2013

5975-01-618-5703
Ground Rod

016185703
800112: RNCC: 3 | RNVC: 2

29 Apr 2013

5975-01-619-3531
Metallic Raceway

016193531
PPI-21: RNCC: 3 | RNVC: 2

28 May 2013

5975-01-631-3501
Electronic Equipment Mounting Tray

016313501
13015842: RNCC: 3 | RNVC: 2

10 Sep 2014

5975-01-631-2957
Electrical Equipment Mounting Base

016312957
63103-200-73: RNCC: 3 | RNVC: 2

8 Sep 2014

5975-01-644-5063
Electrical Equipment Rack

016445063
12505987-005: RNCC: 3 | RNVC: 2
12505987-005: RNCC: 5 | RNVC: 2
12505987: RNCC: D | RNVC: 9

8 May 2015

5975-01-646-2343
Mounting Plate

016462343
250-028140-10: RNCC: 3 | RNVC: 2

15 Jul 2015

5975-01-648-4060
Blank Panel

016484060
PPFS19007BK2: RNCC: 3 | RNVC: 2
13022A1107-00: RNCC: 7 | RNVC: 2
13022A1107: RNCC: D | RNVC: 9

23 Sep 2015

5975-01-649-4093
Stuffing Tube

016494093
2AAT12251: RNCC: 3 | RNVC: 2
2AAT12251: RNCC: 3 | RNVC: 9

28 Oct 2015

5975-01-622-5320
Chassis Base

016225320
DG-008336A: RNCC: 3 | RNVC: 2
DG-008120ITEM10: RNCC: 5 | RNVC: 2

10 Oct 2013

5975-01-624-0720
Electrical Components Tie Down Strap

016240720
MM13660945: RNCC: 3 | RNVC: 2
13660945: RNCC: 5 | RNVC: 2

16 Dec 2013

5975-01-625-1465
Electrical Equipment Shelf

016251465
11018G0323: RNCC: 3 | RNVC: 2

27 Jan 2014

5975-01-625-5843
Electrical Cable Protector

016255843
FXLM-12-25: RNCC: 3 | RNVC: 2
FXLM-12-10: RNCC: 3 | RNVC: 2
FXLM-12-25: RNCC: 5 | RNVC: 9
13019C8001-12: RNCC: 7 | RNVC: 2
13016C8001: RNCC: D | RNVC: 9

7 Feb 2014

5975-01-628-8246
Electrical Components Tie Down Strap

016288246
01-217-000-OFL: RNCC: 3 | RNVC: 2
6614K55: RNCC: 5 | RNVC: 2
7013250: RNCC: 5 | RNVC: 2

11 Jun 2014

5975-01-628-6659
Electrical Components Tie Down Strap

016286659
CTAM20C2: RNCC: 3 | RNVC: 2
05-02-17-015-0FL: RNCC: 3 | RNVC: 2
05-02-17-015-OFL: RNCC: 5 | RNVC: 9
7013207: RNCC: 7 | RNVC: 2

5 Jun 2014

5975-01-629-3286
Electrical Equipment Mounting Base

016293286
901-031-363-131: RNCC: 3 | RNVC: 2

25 Jun 2014

5975-01-630-7441
Electrical Box Connector

016307441
34750-ZY3-326: RNCC: 3 | RNVC: 9
34750-ZY3-C06: RNCC: 5 | RNVC: 9

15 Aug 2014

5975-01-631-0440
Electrical Equipment Rack

016310440
1508-23037-33: RNCC: 3 | RNVC: 2

27 Aug 2014

5975-01-691-1111
Electrical Grounding Plate

016911111
GMCT14F0EX00A0-697.0: RNCC: 3 | RNVC: 2

22 Sep 2020

5975-01-696-4934
Nonmetallic Raceway Assembly

016964934
6D33239G02: RNCC: 3 | RNVC: 2
6D33239: RNCC: D | RNVC: 9

29 Jul 2021

5975-01-681-9913
Electric Box Wiring

016819913
12590722: RNCC: 1 | RNVC: 2
12590722: RNCC: 3 | RNVC: 2
12653050: RNCC: 3 | RNVC: 9

17 Jul 2019

5975-01-686-3480
Electrical Components Tie Down Strap

016863480
T50R0M4: RNCC: 3 | RNVC: 2

10 Feb 2020

5975-01-687-2938
Mounting Plate

016872938
57710P112113: RNCC: 3 | RNVC: 2

26 Mar 2020

5975-01-686-6165
Electrical-Electronic Equipment Chassis

016866165
4353924: RNCC: 3 | RNVC: 2

26 Feb 2020

5975-01-689-9554
Cable Terminal Chamber

016899554
444019: RNCC: 3 | RNVC: 2

17 Jul 2020

5975-01-667-8035
Cable Strain Relief Bushing

016678035
255469: RNCC: 3 | RNVC: 9
MIL255469: RNCC: 5 | RNVC: 2

31 Oct 2017

5975-01-668-0000
Electrical Fitting Mounting Base

016680000
229325: RNCC: 3 | RNVC: 9
MIL229325: RNCC: 5 | RNVC: 2

7 Nov 2017

5975-01-668-3984
Blank Panel

016683984
236941: RNCC: 3 | RNVC: 9
MIL236941: RNCC: 5 | RNVC: 2

21 Nov 2017

5975-01-669-4158
Strain Electrical Conductor Clamp

016694158
BACC10DU500ABE: RNCC: 3 | RNVC: 1

9 Jan 2018

5975-01-669-4681
Cable Hanger

016694681
NMC1005-3: RNCC: 3 | RNVC: 1

9 Jan 2018

5975-01-671-4752
Mounting Plate

016714752
3101203-503: RNCC: 3 | RNVC: 2

29 Mar 2018

5975-01-670-2978
Mounting Plate

016702978
70M0000249-001: RNCC: 3 | RNVC: 2
70M0000249: RNCC: 5 | RNVC: 9
70M0000249-001: RNCC: 5 | RNVC: 9
70M0000249: RNCC: D | RNVC: 9

14 Feb 2018

5975-99-232-9015
Cable Marker Sleeve

5975-01-590-9781
Junction Box

015909781
10031174: RNCC: 3 | RNVC: 2

5 Jan 2011

5975-01-596-7380
Electrical Components Tie Down Strap

015967380
VW7-N07-1BK: RNCC: 3 | RNVC: 9

24 May 2011

5975-01-588-0638
Electrical Components Tie Down Strap

015880638
L-24-175-0-L: RNCC: 3 | RNVC: 2

31 Aug 2010

5975-01-608-6979
Electrical Conduit Nipple

016086979
91700223: RNCC: 3 | RNVC: 2
91700223: RNCC: 3 | RNVC: 9

9 Jul 2012

5975-01-597-9389
Flexible Nonmetallic Conduit

015979389
48-02217: RNCC: 3 | RNVC: 1
48-02217-150: RNCC: 3 | RNVC: 2

23 Jun 2011

5975-01-597-9805
Electrical Tie Down Mounting Base

015979805
CB4020G3N24: RNCC: 3 | RNVC: 2

25 Jun 2011

5975-01-598-4952
Electrical Conduit Wye

015984952
LN81010-7: RNCC: 1 | RNVC: 2
431-001NFA02B02C02: RNCC: 3 | RNVC: 2

6 Aug 2011

5975-01-676-7123
Electrical Grounding Plate

016767123
CP090-01: RNCC: 3 | RNVC: 2
S9515-A6-MMA-010 FIG 7-23-12: RNCC: C | RNVC: 1
S9515-A6-MMA-010 TBL 7-17-12: RNCC: C | RNVC: 1

8 Nov 2018

5975-01-665-9528
Electrical Components Tie Down Strap

016659528
SAE-AS23190: RNCC: 3 | RNVC: 1
MS3367-25-0: RNCC: 3 | RNVC: 2

18 Aug 2017

5975-01-684-3910
Cable Marker Sleeve

016843910
TMS-SCE-2X-1-4: RNCC: 3 | RNVC: 2
MCD160002: RNCC: D | RNVC: 9

31 Oct 2019

5975-01-693-5917
Cable Strain Relief Bushing

016935917
M3231: RNCC: 3 | RNVC: 2
W2T828768: RNCC: 5 | RNVC: 2
CVN-0100RITEM12: RNCC: 5 | RNVC: 2

23 Feb 2021

5975-01-667-8356
Blank Panel

016678356
247225: RNCC: 3 | RNVC: 9
MIL247225: RNCC: 5 | RNVC: 2

1 Nov 2017

5975-01-668-6563
Electrical Cable Protector

016686563
7377804: RNCC: 3 | RNVC: 2

1 Dec 2017

5975-01-669-5673
Electrical Components Tie Down Strap

016695673
SG350LH-L: RNCC: 3 | RNVC: 2

12 Jan 2018

5975-01-670-8817
Junction Box

016708817
RTTJUNCTION/BOX: RNCC: 3 | RNVC: 2

9 Mar 2018

5975-01-689-9560
Cable Terminal Chamber

016899560
1827732: RNCC: 3 | RNVC: 2

17 Jul 2020

5975-01-656-9646
Flexible Metal Conduit

016569646
CC261-16: RNCC: 3 | RNVC: 2

26 Jul 2016

5975-01-661-7377
Interconnecting Box

016617377
24532000: RNCC: 3 | RNVC: 2
4325693: RNCC: 7 | RNVC: 2

14 Mar 2017

5975-01-665-7687
Electrical-Electronic Equipment Chassis

016657687
CAS000958: RNCC: 3 | RNVC: 2
DPA004495 ITEM 78: RNCC: 5 | RNVC: 2
DPA004495: RNCC: D | RNVC: 9

11 Aug 2017

5975-01-605-1694
Electrical Nonmetallic Conduit Assembly

016051694
749-395-847: RNCC: 3 | RNVC: 2

16 Apr 2012

5975-01-608-8622
Junction Box Cover

016088622
50816: RNCC: 3 | RNVC: 2

13 Jul 2012

5975-01-678-6678
Electrical Equipment Mounting Base

016786678
63-2822156-3: RNCC: 3 | RNVC: 2

19 Feb 2019

5975-01-684-5099
Electrical-Electronic Equipment Chassis

016845099
901-005-649-107: RNCC: 3 | RNVC: 2
901-005-646: RNCC: D | RNVC: 9

5 Nov 2019

5975-01-686-1056
Stuffing Tube

016861056
NYST-1-001: RNCC: 3 | RNVC: 2
NYST-1: RNCC: 5 | RNVC: 9
S10610-8100 ITEM 118: RNCC: C | RNVC: 1

30 Jan 2020

5975-01-550-6615
Electrical Tie Down Mounting Base

015506615
SGTM2S8-C: RNCC: 3 | RNVC: 2
7566K13: RNCC: 5 | RNVC: 2

25 Apr 2007

5975-01-551-7360
Cable Hanger

015517360
TYUW10304B: RNCC: 3 | RNVC: 2
8H-A35689: RNCC: D | RNVC: 9

24 May 2007

5975-01-552-3906
Electrical Equipment Mounting Base

015523906
12500720: RNCC: 3 | RNVC: 2

13 Jun 2007

5975-01-552-4469
Electrical Fitting Mounting Base

015524469
071-04020-0001: RNCC: 3 | RNVC: 2

14 Jun 2007

5975-01-553-0820
Ground Rod

015530820
200975: RNCC: 3 | RNVC: 2

5 Jul 2007

5975-01-553-9273
Electrical Wall Plate

015539273
36341040: RNCC: 3 | RNVC: 2
36341040: RNCC: 5 | RNVC: 9

27 Jul 2007

5975-01-554-0308
Electrical Box Connector

015540308
22598712: RNCC: 3 | RNVC: 2
22598712: RNCC: 5 | RNVC: 9

27 Jul 2007

5975-01-556-0516
Kit Volume Booster

015560516
12151-1: RNCC: 3 | RNVC: 2
EA-12151-1: RNCC: 3 | RNVC: 9

21 Sep 2007

5975-01-556-1666
Electrical Equipment Mounting Base

015561666
7185152-51: RNCC: 3 | RNVC: 2

26 Sep 2007

5975-01-556-4139
Metallic Raceway

015564139
4285063: RNCC: 3 | RNVC: 2
4285063: RNCC: 5 | RNVC: 2

2 Oct 2007

5975-01-557-0993
Flexible Nonmetallic Conduit

015570993
0714000: RNCC: 3 | RNVC: 2
0714000: RNCC: 5 | RNVC: 2
3006117: RNCC: 7 | RNVC: 2
12759-00696: RNCC: C | RNVC: 1
S000082: RNCC: D | RNVC: 9

11 Oct 2007

5975-01-557-2672
Junction Box

015572672
140-060XMS-02: RNCC: 3 | RNVC: 2

17 Oct 2007

5975-01-557-6214
Electrical Components Tie Down Strap

015576214
R0073115: RNCC: 3 | RNVC: 2
R0073115: RNCC: 5 | RNVC: 2
252-5977: RNCC: 5 | RNVC: 9
R0073115-0301: RNCC: D | RNVC: 9

25 Oct 2007

5975-01-557-6955
Electrical-Electronic Equipment Panel

015576955
SA091694-300: RNCC: 3 | RNVC: 2
SA-000091694-300: RNCC: 5 | RNVC: 2
8HG 714 504-001: RNCC: 5 | RNVC: 9
SA-000091694-300-001: RNCC: D | RNVC: 9

25 Oct 2007

5975-01-557-6520
Stuffing Tube

015576520
R0071460: RNCC: 3 | RNVC: 2
R0071460: RNCC: 5 | RNVC: 2
R0071460-0300: RNCC: D | RNVC: 9

25 Oct 2007

5975-01-563-0722
Air Cable Tie Mount

015630722
CB4021G3N12: RNCC: 3 | RNVC: 2

1 May 2008

5975-01-567-2012
Junction Box

015672012
MRP22292: RNCC: 3 | RNVC: 2
MRP22292: RNCC: 5 | RNVC: 2

19 Sep 2008

5975-01-568-6078
Metallic Raceway

015686078
3688650C1: RNCC: 3 | RNVC: 2

4 Nov 2008

5975-01-568-7760
Electrical Equipment Rack

015687760
9800-34150-0000: RNCC: 3 | RNVC: 2
F-ADPR-DB20/32: RNCC: 5 | RNVC: 2

10 Nov 2008

5975-01-568-9037
Electrical Equipment Rack

015689037
345PG: RNCC: 3 | RNVC: 2

13 Nov 2008

5975-01-569-4301
Electronic Equipment Mounting Tray

015694301
2492401-K: RNCC: 3 | RNVC: 2

2 Dec 2008

5975-01-569-5303
Electrical Equipment Shelf

015695303
1366112: RNCC: 3 | RNVC: 2

3 Dec 2008

5975-01-578-5895
Nonmetallic Raceway

015785895
N122414-102: RNCC: 3 | RNVC: 2

13 Oct 2009

5975-01-583-0279
Electrical Cable Protector

015830279
502569-03: RNCC: 3 | RNVC: 2
502569-03: RNCC: 5 | RNVC: 2

11 Mar 2010

5975-01-583-1875
Electrical Equipment Rack

015831875
10009489: RNCC: 3 | RNVC: 2

18 Mar 2010

5975-01-583-7485
Cable Hanger

015837485
44981: RNCC: 3 | RNVC: 2
57901: RNCC: 5 | RNVC: 1
57901: RNCC: 5 | RNVC: 9

5 Apr 2010

5975-01-583-6840
Electronic Equipment Mounting Tray

015836840
12005-1920-03: RNCC: 3 | RNVC: 2

1 Apr 2010

5975-01-583-9845
Electrical Equipment Leg Section

015839845
1004004: RNCC: 3 | RNVC: 2
1004004: RNCC: 3 | RNVC: 9
3RP1903: RNCC: 5 | RNVC: 9

14 Apr 2010

5975-01-584-4214
Cable Hanger

015844214
5251368: RNCC: 3 | RNVC: 2

26 Apr 2010

5975-01-584-6096
Switch Box Case

015846096
891-15210: RNCC: 3 | RNVC: 2

30 Apr 2010

5975-01-569-8861
Electrical Cable Protector

015698861
12490579: RNCC: 3 | RNVC: 2

10 Dec 2008

5975-01-571-1254
Electrical Equipment Rack

015711254
13017921: RNCC: 3 | RNVC: 2

23 Jan 2009

5975-01-572-2259
Conduit Chase Nipple

015722259
EMA3/7/16-20UNF-2A: RNCC: 3 | RNVC: 2
EMA3/7/16-20UNF-2A: RNCC: 5 | RNVC: 2
EMA 3/7/16-20 UN: RNCC: 5 | RNVC: 9

4 Mar 2009

5975-01-575-5051
Electrical Conduit Adapter

015755051
16KP409: RNCC: 3 | RNVC: 2
16KP409: RNCC: 5 | RNVC: 9

6 Jul 2009

5975-01-576-7273
Electrical Equipment Rack

015767273
12505987-006: RNCC: 3 | RNVC: 2

12 Aug 2009

5975-01-591-4890
Frame Assy

015914890
199088-K01: RNCC: 3 | RNVC: 2

27 Jan 2011

5975-01-591-5067
Front Protec Plate

015915067
744508-A00: RNCC: 3 | RNVC: 2

27 Jan 2011

5975-01-591-9273
Electrical Wall Plate

015919273
204-53338-2: RNCC: 3 | RNVC: 2

15 Feb 2011

5975-01-592-1538
Electrical Grounding Plate

015921538
3827200: RNCC: 3 | RNVC: 2
3827200: RNCC: 5 | RNVC: 9

23 Feb 2011

5975-01-592-9628
Electrical Conduit Locknut

015929628
5975-1040: RNCC: 3 | RNVC: 2
7513K243: RNCC: 5 | RNVC: 2

30 Mar 2011

5975-01-592-9667
Conduit Chase Nipple

015929667
1339AS952-5: RNCC: 3 | RNVC: 2

30 Mar 2011

5975-01-593-9566
Electrical Equipment Mounting Base

015939566
903595-1: RNCC: 3 | RNVC: 2
903595-1: RNCC: 5 | RNVC: 2
903595: RNCC: D | RNVC: 9

22 Apr 2011

5975-01-595-6520
Electrical Tie Down Mounting Base

015956520
BR1: RNCC: 3 | RNVC: 2
BR1: RNCC: 3 | RNVC: 9

4 May 2011

5975-01-586-2248
Electronic Junction Rack

015862248
DCR-1A-03: RNCC: 3 | RNVC: 2

21 Jun 2010

5975-01-585-9413
Cable Communi Guide

015859413
10015317: RNCC: 3 | RNVC: 2
10015317: RNCC: 7 | RNVC: 2

11 Jun 2010

5975-01-586-4141
Blank Panel

015864141
HNM1BL: RNCC: 3 | RNVC: 2

28 Jun 2010

5975-01-586-8622
Electrical Grounding Plate

015868622
3841218: RNCC: 3 | RNVC: 2
3841218: RNCC: 5 | RNVC: 9

16 Jul 2010

5975-01-586-8623
Electrical Grounding Plate

015868623
3841121: RNCC: 3 | RNVC: 2
3841121: RNCC: 5 | RNVC: 9

16 Jul 2010

5975-01-586-8832
Electrical Equipment Rack

015868832
3861274: RNCC: 3 | RNVC: 2
3861274: RNCC: 5 | RNVC: 9

16 Jul 2010

5975-01-587-4615
Cable Hose Guide

015874615
95-0277-001-CSG: RNCC: 3 | RNVC: 2
3551710C2: RNCC: 5 | RNVC: 2
950-0277-001-CSG: RNCC: 5 | RNVC: 9
3551710C2: RNCC: 7 | RNVC: 2

6 Aug 2010

5975-01-606-6192
Electrical Nonmetallic Conduit Assembly

016066192
CA00886-84530: RNCC: 3 | RNVC: 2

22 May 2012

5975-01-596-7364
Electrical Grounding Plate

015967364
03002A1840-24: RNCC: 3 | RNVC: 2

24 May 2011

5975-01-588-7418
Electrical Tie Down Mounting Base

015887418
MCMS25-P-C: RNCC: 3 | RNVC: 2

1 Oct 2010

5975-01-589-6311
Electrical Components Tie Down Strap

015896311
132-00011: RNCC: 3 | RNVC: 2
3892381: RNCC: 3 | RNVC: 2
3892381: RNCC: 5 | RNVC: 9
3892381: RNCC: 7 | RNVC: 2

1 Nov 2010

5975-01-590-0448
Electrical Components Tie Down Strap

015900448
L-8-40-9-C: RNCC: 3 | RNVC: 2

16 Nov 2010

5975-01-598-5935
Ergo Shoulder Strap

015985935
901950: RNCC: 3 | RNVC: 2
13674979: RNCC: 7 | RNVC: 2

15 Aug 2011

5975-01-604-2831
Electrical-Electronic Equipment Chassis

016042831
450-075-304-103: RNCC: 3 | RNVC: 2
405-575-006 SH 17: RNCC: D | RNVC: 9

2 Apr 2012

5975-01-610-0217
Flexible Metal Conduit Assembly

016100217
3260AS1328-30: RNCC: 3 | RNVC: 2
3260AS1328: RNCC: D | RNVC: 9

8 Aug 2012

5975-01-610-3072
Electrical Components Tie Down Strap

016103072
BACS38W4: RNCC: 3 | RNVC: 2

14 Aug 2012

5975-01-610-6700
Electrical Nonmetallic Conduit Assembly

016106700
3260AS1328-56: RNCC: 1 | RNVC: 2
749-844-56: RNCC: 3 | RNVC: 2
3260AS1328: RNCC: D | RNVC: 9

24 Aug 2012

5975-01-610-6727
Electrical Nonmetallic Conduit Assembly

016106727
3260AS1328-19: RNCC: 1 | RNVC: 2
749-844-19: RNCC: 3 | RNVC: 2
3260AS1328: RNCC: D | RNVC: 9

24 Aug 2012

5975-01-612-9445
Flexible Nonmetallic Conduit

016129445
LCP-1000-100: RNCC: 3 | RNVC: 2
3560080: RNCC: 5 | RNVC: 2
LCP-1000-250: RNCC: 5 | RNVC: 9
3560080: RNCC: 5 | RNVC: 9

25 Oct 2012

5975-01-613-5782
Cable Marker Sleeve

016135782
XPS-250-1: RNCC: 3 | RNVC: 2

9 Nov 2012

5975-01-615-1860
Mounting Plate

016151860
A00076: RNCC: 3 | RNVC: 2
A00076: RNCC: 5 | RNVC: 2

3 Jan 2013

5975-01-615-2450
Stuffing Tube

016152450
218344-13-18: RNCC: 3 | RNVC: 9
SEEPA-MP-06 -C: RNCC: 5 | RNVC: 2
SEEPA-PC06: RNCC: 5 | RNVC: 9

7 Jan 2013

5975-01-616-1838
Electrical Components Tie Down Strap

016161838
SAE-AS23190: RNCC: 3 | RNVC: 1
MS3367-10-0: RNCC: 3 | RNVC: 2
MS3367-10-0: RNCC: 3 | RNVC: 9
SAE-AS33671/10: RNCC: 5 | RNVC: 1
SAE-AS23190: RNCC: 5 | RNVC: 9
SAE-AS33671/10: RNCC: 5 | RNVC: 9

5 Feb 2013

5975-01-616-2535
Blank Panel

016162535
MP-0010351T: RNCC: 3 | RNVC: 2

6 Feb 2013

5975-01-616-3221
Electrical Equipment Cabinet

016163221
245STDD5423ZX: RNCC: 3 | RNVC: 2
13530275-3: RNCC: 7 | RNVC: 2

8 Feb 2013

5975-01-616-9616
Electrical Conduit Adapter

016169616
AX0685-3224-SP: RNCC: 3 | RNVC: 2

5 Mar 2013

5975-01-617-0178
Junction Box

016170178
SB31-JB: RNCC: 3 | RNVC: 2

7 Mar 2013

5975-01-617-0805
Electrical Equipment Cabinet

016170805
175STDD5417ZX: RNCC: 3 | RNVC: 2
13530274-3: RNCC: 3 | RNVC: 2
13530274: RNCC: 7 | RNVC: 2

11 Mar 2013

5975-01-617-0806
Electrical Equipment Cabinet

016170806
13530274-4: RNCC: 3 | RNVC: 2
175STDN5415ZX: RNCC: 5 | RNVC: 2

11 Mar 2013

5975-01-617-6827
Self-Locki Holddown

016176827
MT1-5001: RNCC: 3 | RNVC: 2

30 Mar 2013

5975-01-617-6945
Interconnecting Box Cover

016176945
12555318: RNCC: 3 | RNVC: 2

1 Apr 2013

5975-01-619-7731
Electrical Conduit Bondnut

016197731
7466K36: RNCC: 3 | RNVC: 2

17 Jun 2013

5975-01-631-1493
Electrical Cable Protector

016311493
13015532-2: RNCC: 3 | RNVC: 2

3 Sep 2014

5975-01-631-4917
Electrical Fitting Mounting Base

016314917
13015541: RNCC: 3 | RNVC: 2

16 Sep 2014

5975-01-632-3219
Mounting Plate

016323219
TC826-TB: RNCC: 3 | RNVC: 2
7517E88FIND122: RNCC: 7 | RNVC: 2

15 Oct 2014

5975-01-640-8658
Electrical Equipment Mounting Base

016408658
IM2370-COMPTRAY: RNCC: 3 | RNVC: 2

30 Dec 2014

5975-01-640-7450
Electrical Equipment Cabinet

016407450
SDN20-24-100C: RNCC: 3 | RNVC: 2
SDN20-24-100C: RNCC: 3 | RNVC: 9
BB-9001243-01(24): RNCC: 5 | RNVC: 2

19 Dec 2014

5975-01-643-4891
Electrical Fitting Mounting Base

016434891
301-2180-001: RNCC: 3 | RNVC: 2

2 Apr 2015

5975-01-644-9647
Electrical Box Connector

016449647
2921: RNCC: 3 | RNVC: 2

28 May 2015

5975-01-646-6673
Electrical Components Tie Down Strap

016466673
R2020497: RNCC: 3 | RNVC: 2
R2020497: RNCC: 5 | RNVC: 2
C7-50-LP-0: RNCC: 5 | RNVC: 2
R2020497-FH00: RNCC: D | RNVC: 9

28 Jul 2015

5975-01-646-0548
Electrical Grounding Plate

016460548
270-038-00: RNCC: 3 | RNVC: 2

10 Jul 2015

5975-01-620-7736
Cable Hanger

016207736
82-2810739-2: RNCC: 3 | RNVC: 2
02-2805803 FIND NO. 26: RNCC: 5 | RNVC: 2
02-2805803: RNCC: D | RNVC: 9

9 Aug 2013

5975-01-624-9051
Electrical-Electronic Equipment Chassis

016249051
012701-AY-1: RNCC: 3 | RNVC: 2
012701-AY-1: RNCC: 5 | RNVC: 2

17 Jan 2014

5975-01-625-4670
Electrical Cable Protector

016254670
FXLM-38-10: RNCC: 3 | RNVC: 2
FXLM-38-10: RNCC: 3 | RNVC: 9
13019C8001-38: RNCC: 7 | RNVC: 2
13016C8001: RNCC: D | RNVC: 9

5 Feb 2014

5975-01-627-3221
Junction Box Assembly

016273221
12538609: RNCC: 3 | RNVC: 2
12538609: RNCC: 5 | RNVC: 2
12538609: RNCC: 7 | RNVC: 2

9 Apr 2014

5975-01-631-2597
Electrical Equipment Cabinet

016312597
09206049-01: RNCC: 3 | RNVC: 2

5 Sep 2014

5975-01-666-3429
Electrical Conduit Coupling Nut Clamp

016663429
MC-046515: RNCC: 3 | RNVC: 2
97-3899ITEM206: RNCC: 5 | RNVC: 2
97-3899: RNCC: D | RNVC: 9

1 Sep 2017

5975-01-691-5231
Electrical Components Tie Down Strap

016915231
PLT.6SM-C0: RNCC: 3 | RNVC: 2
PLT.6SM-C0: RNCC: 5 | RNVC: 2
3587.8090.00: RNCC: 5 | RNVC: 2

14 Oct 2020

5975-01-693-2294
Electrical Tie Down Mounting Base

016932294
05-2-17-005-0FL: RNCC: 3 | RNVC: 2
7566K27: RNCC: 5 | RNVC: 2
7013233: RNCC: 7 | RNVC: 2

29 Jan 2021

5975-01-667-8055
Electrical Conduit Adapter

016678055
01D3185H04: RNCC: 1 | RNVC: 2
M24758-3D: RNCC: 3 | RNVC: 2
3890AS003288-01-H04: RNCC: 5 | RNVC: 1
M24758-3D: RNCC: 5 | RNVC: 9

31 Oct 2017

5975-01-694-2539
Electrical Equipment Rack

016942539
505M/0140: RNCC: 3 | RNVC: 2

24 Mar 2021

5975-01-684-8976
Electrical-Electronic Equipment Panel

016848976
404-0376-03: RNCC: 3 | RNVC: 9
0404-0376-03: RNCC: 5 | RNVC: 9

20 Nov 2019

5975-12-143-8978
Electrical Conduit Locknut

121438978
521.21: RNCC: 3 | RNVC: 2
6.641-368.0: RNCC: 5 | RNVC: 2
109521201: RNCC: 5 | RNVC: 2
6-641-368: RNCC: 5 | RNVC: 9
6.641-368: RNCC: 5 | RNVC: 9
APG21DIN46258MS: RNCC: 5 | RNVC: 9
521-21: RNCC: 5 | RNVC: 9
DIN46258-APG21-MS: RNCC: 5 | RNVC: 9

30 May 1969

5975-01-687-1783
Interconnecting Box

016871783
123AV93636-23: RNCC: 3 | RNVC: 2

23 Mar 2020

5975-01-689-7564
End Cap Cover

016897564
7013349: RNCC: 3 | RNVC: 2

9 Jul 2020

5975-01-671-3322
Guide Rail

016713322
97361352: RNCC: 3 | RNVC: 2
43021: RNCC: 5 | RNVC: 9
4366500: RNCC: 7 | RNVC: 2

22 Mar 2018

5975-01-675-0920
Electrical Equipment Mounting Base

016750920
07006B1510: RNCC: 3 | RNVC: 2

22 Aug 2018

5975-01-651-1595
Rigid Metal Conduit Assembly

016511595
23A02931-8: RNCC: 3 | RNVC: 2

7 Jan 2016

5975-01-651-4772
Electronic Equipment Mounting Tray

016514772
901-370-345-759: RNCC: 3 | RNVC: 2

20 Jan 2016

5975-01-651-4784
Electronic Equipment Mounting Tray

016514784
901-370-345-779: RNCC: 3 | RNVC: 2

20 Jan 2016

5975-01-652-3792
Electrical Cable Protector

016523792
50-107-B04T: RNCC: 1 | RNVC: 2
50-107-B04T: RNCC: 3 | RNVC: 2

19 Feb 2016

5975-01-652-3638
Electrical Conduit Elbow

016523638
3LL05: RNCC: 3 | RNVC: 2
3LL05: RNCC: 5 | RNVC: 2
36.5MET30.5587-4376: RNCC: 5 | RNVC: 9

19 Feb 2016

5975-01-653-0510
Electrical Equipment Rack

016530510
KIT-00198: RNCC: 3 | RNVC: 2

10 Mar 2016

5975-01-653-9012
Electrical Equipment Leg

016539012
12007D0006-0: RNCC: 1 | RNVC: 2
10239: RNCC: 3 | RNVC: 2
12007D0006: RNCC: D | RNVC: 9

11 Apr 2016

5975-12-364-6469
Electrical Conduit Adapter

123646469
527.1307: RNCC: 3 | RNVC: 2

19 Oct 2004

5975-99-406-7409
Cable Marker Sleeve

994067409
2349W304: RNCC: 3 | RNVC: 2

23 Feb 1998

5975-99-471-7815
Line Supporti Strap

5975-12-396-7856
Electrical Locknut

5975-12-402-7526
Electrical-El Panel

5975-12-407-4552
Elec Tie Down Strap

5975-20-008-7198
Elect Mounting Base

5975-01-604-9316
Electrical-Electronic Equipment Chassis

016049316
6577-1300-0500: RNCC: 3 | RNVC: 2
6012481-002: RNCC: 7 | RNVC: 2

13 Apr 2012

5975-01-597-1465
Electrical Grounding Plate

015971465
03002A1840-11: RNCC: 3 | RNVC: 2

31 May 2011

5975-01-603-7726
Electronic Equipment Mounting Tray

016037726
3DM-1NLM-001: RNCC: 3 | RNVC: 2
08002B1102: RNCC: D | RNVC: 9

15 Mar 2012

5975-01-675-8253
Electrical-Electronic Equipment Panel

016758253
3961176: RNCC: 3 | RNVC: 2

28 Sep 2018

5975-01-667-3740
Electrical-Electronic Equipment Chassis

016673740
252490: RNCC: 3 | RNVC: 9
MIL252490: RNCC: 5 | RNVC: 2

13 Oct 2017

5975-01-667-8026
Chassis Base

016678026
246626: RNCC: 3 | RNVC: 9
MIL246626: RNCC: 5 | RNVC: 2

31 Oct 2017

5975-01-668-1942
Blank Panel

016681942
270458: RNCC: 3 | RNVC: 9
MIL270458: RNCC: 5 | RNVC: 2

13 Nov 2017

5975-01-682-8286
Electrical Conduit Ferrule

016828286
401-8464254 ITEM 37: RNCC: 3 | RNVC: 2
3200991: RNCC: 5 | RNVC: 2

26 Aug 2019

5975-01-670-2887
Strain Electrical Conductor Clamp

016702887
BACC10GE8A: RNCC: 3 | RNVC: 1
TA12C32WD8: RNCC: 5 | RNVC: 1
JM44LC13WD8R: RNCC: 5 | RNVC: 1

14 Feb 2018

5975-01-684-4730
Electrical Components Tie Down Strap

016844730
PR63981: RNCC: 3 | RNVC: 2
RT6-50-OC-.30: RNCC: 3 | RNVC: 2
13748489: RNCC: 7 | RNVC: 2

4 Nov 2019

5975-01-693-0497
Electrical-Electronic Equipment Chassis

016930497
CAS000590: RNCC: 3 | RNVC: 2

25 Jan 2021

5975-01-694-2536
Electrical Equipment Rack

016942536
505M/0136: RNCC: 3 | RNVC: 2

24 Mar 2021

5975-01-694-2542
Electrical Equipment Rack

016942542
505M/0138: RNCC: 3 | RNVC: 2

24 Mar 2021

5975-99-660-3347
Guide Rail

996603347
MB-200-473: RNCC: 3 | RNVC: 2
C/MB-200-473: RNCC: 5 | RNVC: 2

8 Jul 1992

5975-01-550-6052
Cable Marker Sleeve

015506052
32613: RNCC: 3 | RNVC: 2
PS-125-150W: RNCC: 5 | RNVC: 2

24 Apr 2007

5975-01-552-7484
Strain Electrical Conductor Clamp

015527484
30-302-2D04J08: RNCC: 3 | RNVC: 2

22 Jun 2007

5975-01-556-2383
Conduit Outlet

015562383
GFRST20BKBULK: RNCC: 3 | RNVC: 2
GFR5352BKAM1: RNCC: 5 | RNVC: 9

27 Sep 2007

5975-01-556-6015
Crossarm Brace

015566015
3548585C1: RNCC: 3 | RNVC: 2

3 Oct 2007

5975-01-556-6071
Cable Hanger

015566071
MT2024022CST: RNCC: 3 | RNVC: 2
3554554C1: RNCC: 5 | RNVC: 2
3554554C1: RNCC: 5 | RNVC: 2
3554554C1: RNCC: 5 | RNVC: 9

3 Oct 2007

5975-01-556-7943
Cable Hanger

015567943
75-1559-001: RNCC: 3 | RNVC: 2
BPMI07-5050-01: RNCC: 5 | RNVC: 2

5 Oct 2007

5975-01-557-0995
Flexible Nonmetallic Conduit

015570995
0708159: RNCC: 3 | RNVC: 2
12759-00698: RNCC: C | RNVC: 1

11 Oct 2007

5975-01-557-4830
Cable Hanger

015574830
7607321-0032: RNCC: 3 | RNVC: 2
200-8180879 ITEM 13: RNCC: 5 | RNVC: 1
200-7607321 ITEM 32: RNCC: 5 | RNVC: 2

24 Oct 2007

5975-01-558-4056
Underground Cable Rack Hook

015584056
A3184215-3: RNCC: 3 | RNVC: 2

8 Nov 2007

5975-01-559-2876
Electrical Components Tie Down Strap

015592876
23-12115-001: RNCC: 3 | RNVC: 2

12 Dec 2007

5975-01-560-1737
Junction Box Assemb

015601737
10810068: RNCC: 3 | RNVC: 2
10810068: RNCC: 5 | RNVC: 2
10810068: RNCC: 5 | RNVC: 9

17 Jan 2008

5975-01-562-2088
Electrical Tie Down Mounting Base

015622088
195A097-1: RNCC: 3 | RNVC: 2

2 Apr 2008

5975-01-564-6434
Rigid Nonmetallic Conduit

015646434
PFT-510-BBLK-250: RNCC: 3 | RNVC: 2

24 Jun 2008

5975-01-568-1255
Blank Panel

015681255
19C336871P2: RNCC: 3 | RNVC: 2

21 Oct 2008

5975-01-567-5889
Rigid Metal Conduit

015675889
205A396-3: RNCC: 3 | RNVC: 2

1 Oct 2008

5975-01-568-6756
Electrical-Electronic Equipment Panel

015686756
040489-133: RNCC: 3 | RNVC: 2

5 Nov 2008

5975-01-568-9477
Electrical-Electronic Equipment Panel

015689477
52-1063: RNCC: 3 | RNVC: 2

14 Nov 2008

5975-01-569-2288
Flexible Nonmetallic Conduit

015692288
SAE-AS81914/4: RNCC: 3 | RNVC: 1
M81914/4-1106: RNCC: 3 | RNVC: 2
SAE AS81914: RNCC: 5 | RNVC: 1
SAE AMS-T-81914: RNCC: 5 | RNVC: 1
M81914/4-1106: RNCC: 5 | RNVC: 1
SAE AMS-T-81914: RNCC: 5 | RNVC: 9
M81914/4-1106: RNCC: 5 | RNVC: 9
SAE AS81914: RNCC: 5 | RNVC: 9

24 Nov 2008

5975-01-577-7297
Electrical-Electronic Equipment Panel

015777297
SSG2STYLE26-57-FBK: RNCC: 3 | RNVC: 9
10002522: RNCC: 5 | RNVC: 2
26-57: RNCC: 5 | RNVC: 9

16 Sep 2009

5975-01-578-0175
Flexible Nonmetallic Conduit

015780175
61815165: RNCC: 3 | RNVC: 2
1491-300-IT101: RNCC: 5 | RNVC: 2

24 Sep 2009

5975-01-580-7417
Electrical Equipment Mounting Base

015807417
920015-13: RNCC: 3 | RNVC: 2

28 Dec 2009

5975-01-580-0466
Flexible Metal Conduit

015800466
19KP578: RNCC: 3 | RNVC: 2
19KP578: RNCC: 5 | RNVC: 9
301873: RNCC: D | RNVC: 9

2 Dec 2009

5975-01-581-2459
Conduit Outlet

015812459
03002A1733-1: RNCC: 3 | RNVC: 2

11 Jan 2010

5975-01-581-3788
Aircraf Rubber Boot

015813788
MA600: RNCC: 3 | RNVC: 9

14 Jan 2010

5975-01-582-1857
Electrical Equipment Shelf

015821857
139621-60BAB00: RNCC: 3 | RNVC: 2
MES050B-60BAB00: RNCC: 3 | RNVC: 9

10 Feb 2010

5975-01-583-4743
Metallic Raceway Assembly

015834743
4341877: RNCC: 3 | RNVC: 2

25 Mar 2010

5975-01-584-6169
Electrical Components Tie Down Strap

015846169
520-039: RNCC: 3 | RNVC: 2

2 May 2010

5975-01-584-8617
Electrical-Electronic Equipment Chassis

015848617
3401553-1: RNCC: 3 | RNVC: 2

7 May 2010

5975-01-570-0711
Junction Box

015700711
3779965: RNCC: 3 | RNVC: 2
3698054: RNCC: 5 | RNVC: 9
3779965: RNCC: 5 | RNVC: 9

16 Dec 2008

5975-01-571-7202
Electrical Equipment Mounting Base

015717202
12987808: RNCC: 3 | RNVC: 2

13 Feb 2009

5975-01-572-5733
Electrical-Electronic Equipment Panel

015725733
PBPA19001BK2: RNCC: 3 | RNVC: 2
4105 REV C ITEM 17: RNCC: 5 | RNVC: 1
97F9407: RNCC: 5 | RNVC: 2

16 Mar 2009

5975-01-572-8292
Electrical Grounding Plate

015728292
7461100201: RNCC: 3 | RNVC: 2

26 Mar 2009

5975-01-572-9278
Cable Strain Relief Bushing

015729278
950997: RNCC: 3 | RNVC: 2
950953: RNCC: 3 | RNVC: 9
950953: RNCC: 5 | RNVC: 2

31 Mar 2009

5975-01-573-7897
Electrical-Electronic Equipment Panel

015737897
299801-1: RNCC: 3 | RNVC: 2
299801: RNCC: D | RNVC: 9

5 May 2009

5975-01-575-3515
Electrical Equipment Mounting Base

015753515
12506173: RNCC: 3 | RNVC: 2

29 Jun 2009

5975-01-576-0294
Blank Panel

015760294
7648332-1: RNCC: 3 | RNVC: 2
7648332: RNCC: D | RNVC: 9

21 Jul 2009

5975-01-576-4938
Electrical Components Tie Down Strap

015764938
23-12069-001: RNCC: 3 | RNVC: 2
23-12069: RNCC: D | RNVC: 9

3 Aug 2009

5975-01-576-8281
Electrical Equipment Rack

015768281
12505987-011: RNCC: 3 | RNVC: 2

17 Aug 2009

5975-01-591-4820
Upper Front Panel

015914820
196572-C00: RNCC: 3 | RNVC: 2

27 Jan 2011

5975-01-591-5065
Upper Front Panel

015915065
744951-A00: RNCC: 3 | RNVC: 2

27 Jan 2011

5975-01-591-5875
Chrg Mtr Rsist Assy

015915875
748093-K01: RNCC: 3 | RNVC: 2

1 Feb 2011

5975-01-591-8609
Electrical Cable Nipple

015918609
90-115-4: RNCC: 1 | RNVC: 2
90-115-4: RNCC: 3 | RNVC: 2
90-115-4: RNCC: 3 | RNVC: 2
90-115-4: RNCC: 3 | RNVC: 2

14 Feb 2011

5975-01-593-6207
Electrical Equipment Shelf

015936207
12505276-003: RNCC: 3 | RNVC: 2

13 Apr 2011

5975-01-593-9612
Electrical Equipment Mounting Base

015939612
872878-1: RNCC: 3 | RNVC: 2
872878-1: RNCC: 5 | RNVC: 2
872878: RNCC: D | RNVC: 9

22 Apr 2011

5975-01-595-4949
Cable Terminal Chamber

015954949
724S6824-207: RNCC: 3 | RNVC: 2

28 Apr 2011

5975-01-595-5309
Electrical Tie Down Mounting Base

015955309
CB4020G5N24: RNCC: 3 | RNVC: 2

30 Apr 2011

5975-01-596-6889
Rigid Metal Conduit

015966889
712AS178M2212-31: RNCC: 3 | RNVC: 2

23 May 2011

5975-01-596-7344
Conduit Outlet Cover

015967344
03002A1733-3: RNCC: 3 | RNVC: 2

24 May 2011

5975-01-586-3578
Electrical Wall Plate

015863578
3KH41: RNCC: 3 | RNVC: 2
5146-0: RNCC: 5 | RNVC: 2
3KH41: RNCC: 5 | RNVC: 9

28 Jun 2010

5975-01-586-9890
Stuffing Tube

015869890
4305481: RNCC: 1 | RNVC: 2
BAE CR100SS/6: RNCC: 3 | RNVC: 2
4305481: RNCC: 5 | RNVC: 2

21 Jul 2010

5975-01-588-3362
Stuffing Tube

015883362
41011005: RNCC: 3 | RNVC: 2

13 Sep 2010

5975-01-588-3969
Stuffing Tube

015883969
41011045: RNCC: 3 | RNVC: 2

15 Sep 2010

5975-01-589-4253
Ground Rod

015894253
90001A0023: RNCC: 3 | RNVC: 2

26 Oct 2010

5975-01-589-6162
Electrical Equipment Mounting Base

015896162
3912028: RNCC: 3 | RNVC: 2
3912028: RNCC: 5 | RNVC: 9

1 Nov 2010

5975-01-590-0095
Guide Rail

015900095
36901417: RNCC: 3 | RNVC: 2
3841AS1235-01: RNCC: 5 | RNVC: 2

12 Nov 2010

5975-01-590-5241
Flexible Nonmetallic Conduit

015905241
4L79156-101A: RNCC: 3 | RNVC: 2

8 Dec 2010

5975-01-591-1693
Electrical Tie Down Mounting Base

015911693
TY8-LKCBK: RNCC: 3 | RNVC: 2
R0112170: RNCC: 5 | RNVC: 2
R0112170: RNCC: 7 | RNVC: 2
R0112170-FH00: RNCC: D | RNVC: 9

13 Jan 2011

5975-01-597-1386
Cable Hanger

015971386
03002A1793-2: RNCC: 3 | RNVC: 2

31 May 2011

5975-01-605-1693
Electrical Nonmetallic Conduit Assembly

016051693
749-395-845-30: RNCC: 3 | RNVC: 2

16 Apr 2012

5975-01-605-1697
Electrical Nonmetallic Conduit Assembly

016051697
749-395-845-10: RNCC: 3 | RNVC: 2

16 Apr 2012

5975-01-605-3356
Electrical Cable Nipple

016053356
3928727C1: RNCC: 3 | RNVC: 2

18 Apr 2012

5975-01-605-6311
Blank Panel

016056311
A10P10: RNCC: 3 | RNVC: 2

23 Apr 2012

5975-01-607-1241
Electrical Components Tie Down Strap

016071241
SAE-AS23190: RNCC: 3 | RNVC: 1
MS3367-29-0: RNCC: 3 | RNVC: 2
MS3367-29-0: RNCC: 3 | RNVC: 9
AS33671: RNCC: 5 | RNVC: 1
AS33671: RNCC: 5 | RNVC: 9

31 May 2012

5975-01-606-4617
Electrical Box Connector

016064617
9106K531: RNCC: 3 | RNVC: 2

18 May 2012

5975-01-609-6016
Cable Hanger

016096016
BACS31H1A: RNCC: 3 | RNVC: 2

30 Jul 2012

5975-01-604-8379
Electrical Tie Down Mounting Base

016048379
569-8217351-63: RNCC: 3 | RNVC: 1
CTAM210C2: RNCC: 3 | RNVC: 2

13 Apr 2012

5975-01-610-0199
Electrical Equipment Mounting Base

016100199
833HN270-1: RNCC: 3 | RNVC: 2

8 Aug 2012

5975-01-610-0058
Flexible Metal Conduit Assembly

016100058
749-844-49: RNCC: 3 | RNVC: 2
3260AS1328-49: RNCC: 3 | RNVC: 2

7 Aug 2012

5975-01-611-5394
Electrical Components Tie Down Strap

016115394
950-31593-2: RNCC: 3 | RNVC: 2

18 Sep 2012

5975-01-612-0627
Chassis Base

016120627
450-075-305-105: RNCC: 3 | RNVC: 2

2 Oct 2012

5975-01-611-0109
Rigid Nonmetallic Conduit

016110109
4G14263-101A: RNCC: 3 | RNVC: 2

4 Sep 2012

5975-01-611-9295
Electrical-Electronic Equipment Panel

016119295
106A0309-1: RNCC: 3 | RNVC: 2

28 Sep 2012

5975-01-613-0567
Junction Box

016130567
31.70.02.040H: RNCC: 3 | RNVC: 2
317002040H: RNCC: 5 | RNVC: 9
31.70.02.040H: RNCC: C | RNVC: 1

29 Oct 2012

NSN 5975-01-616-0564 016160564 JUNCTION BOX

5975-01-616-0564
Junction Box

016160564
F163448: RNCC: 3 | RNVC: 2
ACT-7421: RNCC: 5 | RNVC: 1
F163428 REV A ITEM NO. 1: RNCC: 5 | RNVC: 2
F163448 REV A: RNCC: 7 | RNVC: 1

30 Jan 2013

5975-01-616-2132
Electrical Cable Protector

016162132
11018G0096: RNCC: 3 | RNVC: 2
512848: RNCC: 5 | RNVC: 2

5 Feb 2013

5975-01-616-3145
Stuffing Tube

016163145
6D62105-001: RNCC: 3 | RNVC: 2

8 Feb 2013

5975-01-616-3232
Electrical Equipment Cabinet

016163232
245STDD5422ZX: RNCC: 3 | RNVC: 2
13530275-4: RNCC: 3 | RNVC: 2

8 Feb 2013

5975-01-616-4605
Electrical Equipment Cabinet

016164605
175STDD5487ZX: RNCC: 3 | RNVC: 2
13530274-2: RNCC: 3 | RNVC: 2

14 Feb 2013

5975-01-617-0807
Electrical Equipment Cabinet

016170807
13530274-5: RNCC: 3 | RNVC: 2
175STDN5414ZX: RNCC: 5 | RNVC: 2

11 Mar 2013

5975-01-632-2755
Electrical Wall Plate

016322755
3827265: RNCC: 3 | RNVC: 2

14 Oct 2014

5975-01-634-0617
Blank Panel

016340617
FEB1: RNCC: 3 | RNVC: 9

15 Dec 2014

5975-01-634-0621
Blank Panel

016340621
FEB2: RNCC: 3 | RNVC: 9

15 Dec 2014

5975-01-642-0589
Flexible Nonmetallic Conduit

016420589
MIL-001-764: RNCC: 3 | RNVC: 2

11 Feb 2015

5975-01-643-2465
Electronic Equipment Mounting Tray

016432465
MT55M1119-3: RNCC: 3 | RNVC: 2

25 Mar 2015

5975-01-643-0892
Cable Spacer

016430892
9D0224-3: RNCC: 3 | RNVC: 2

19 Mar 2015

5975-01-643-5765
Cable Int Panel

016435765
09203083-01: RNCC: 3 | RNVC: 2

7 Apr 2015

5975-01-643-4892
Electrical Fitting Mounting Base

016434892
301-5170-001: RNCC: 3 | RNVC: 2

2 Apr 2015

5975-01-645-2560
Junction Box

016452560
827-11305-1: RNCC: 3 | RNVC: 2

9 Jun 2015

5975-01-646-5161
Electrical-Electronic Equipment Chassis

016465161
CAP003853: RNCC: 3 | RNVC: 2
DCA101574 ITEM 5: RNCC: 5 | RNVC: 2
DCA101574: RNCC: D | RNVC: 9

22 Jul 2015

5975-01-646-5149
Electrical Equipment Cabinet

016465149
490464: RNCC: 3 | RNVC: 2
490464: RNCC: 5 | RNVC: 9

22 Jul 2015

5975-01-621-7879
Knockout Reducing Washer

016217879
021-32266-000: RNCC: 3 | RNVC: 2
377-26417-000ITEM15: RNCC: 5 | RNVC: 2

17 Sep 2013

5975-01-622-9716
Blank Panel

016229716
SRC3580-03: RNCC: 3 | RNVC: 2

28 Oct 2013

5975-01-623-7915
Mounting Plate

016237915
13041550: RNCC: 3 | RNVC: 2

2 Dec 2013

5975-01-623-9889
Electrical Equipment Mounting Base

016239889
13041461: RNCC: 3 | RNVC: 2

11 Dec 2013

5975-01-625-3926
Electrical Conduit Elbow

016253926
ST-4575: RNCC: 3 | RNVC: 2

3 Feb 2014

5975-01-628-4467
Stuffing Tube

016284467
SE93-202B-12: RNCC: 3 | RNVC: 2
SE93: RNCC: D | RNVC: 9

27 May 2014

5975-01-627-5639
Guide Rail

016275639
SJT504-03: RNCC: 3 | RNVC: 2
CTJ-3B-04: RNCC: 3 | RNVC: 2
GR803A3B: RNCC: 7 | RNVC: 2

17 Apr 2014

5975-01-631-1487
Electrical Cable Protector

016311487
13015530-1: RNCC: 3 | RNVC: 2

3 Sep 2014

5975-01-667-3722
Electrical-Electronic Equipment Chassis

016673722
201658: RNCC: 3 | RNVC: 9
MIL201658: RNCC: 5 | RNVC: 2

13 Oct 2017

5975-01-679-2466
Electrical Equipment Mounting Base

016792466
GAS035: RNCC: 3 | RNVC: 2
GAS035: RNCC: 5 | RNVC: 2

15 Mar 2019

5975-01-681-8436
Electrical Conduit Cross

016818436
21A00492-21-3201: RNCC: 3 | RNVC: 2
21A00492: RNCC: D | RNVC: 9

10 Jul 2019

5975-01-681-8435
Electrical Conduit Cross

016818435
21A00492-21-3200: RNCC: 3 | RNVC: 2
21A00492: RNCC: D | RNVC: 9

10 Jul 2019

5975-01-668-6899
Cable Hanger

016686899
INV15929: RNCC: 3 | RNVC: 2

4 Dec 2017

5975-01-692-9811
Rigid Metal Conduit

016929811
78207-03811-101: RNCC: 3 | RNVC: 2

21 Jan 2021

5975-01-693-0183
Rigid Metal Conduit

016930183
78207-03811-102: RNCC: 3 | RNVC: 2

22 Jan 2021

5975-01-671-8380
Cable Marker Sleeve

016718380
TMS-SCE-1K-3/8-2.0-4: RNCC: 3 | RNVC: 2
C-MCD160002: RNCC: D | RNVC: 9

12 Apr 2018

5975-01-686-9085
Electrical-Electronic Equipment Panel

016869085
504-0000: RNCC: 3 | RNVC: 2

10 Mar 2020

5975-01-675-8535
Electrical Grounding Plate

016758535
961114-2: RNCC: 3 | RNVC: 2

1 Oct 2018

5975-01-689-9516
Cable Terminal Chamber

016899516
1833085: RNCC: 3 | RNVC: 2

17 Jul 2020

5975-01-689-9557
Cable Terminal Chamber

016899557
1827790: RNCC: 3 | RNVC: 2

17 Jul 2020

5975-01-694-2283
Electrical Cable Protector

016942283
5624301908S: RNCC: 3 | RNVC: 2
FMC-RNDEMIFS-019-21: RNCC: 3 | RNVC: 9

23 Mar 2021

5975-01-694-2532
Electrical Equipment Rack

016942532
505M/0137: RNCC: 3 | RNVC: 2

24 Mar 2021

5975-12-173-1196
Cable Marker Sleeve

121731196
0252601512: RNCC: 3 | RNVC: 2
405.11.0007: RNCC: 5 | RNVC: 2
2526-0-3: RNCC: 5 | RNVC: 9
2526.0-3: RNCC: 5 | RNVC: 9
25260-3SW: RNCC: 5 | RNVC: 9

20 Mar 1978

5975-12-173-1199
Cable Marker Sleeve

121731199
0252601521: RNCC: 3 | RNVC: 2
405.11.0010: RNCC: 5 | RNVC: 2
2526.0-6: RNCC: 5 | RNVC: 9
25260-6SW: RNCC: 5 | RNVC: 9
2526-0-6: RNCC: 5 | RNVC: 9

20 Mar 1978

5975-12-196-0743
Kabel Halter

121960743
151-27019: RNCC: 3 | RNVC: 2
435.07.0004: RNCC: 5 | RNVC: 2
LKC: RNCC: 5 | RNVC: 2
12H4774: RNCC: 5 | RNVC: 2
090003316: RNCC: 5 | RNVC: 2

25 May 1983

5975-01-653-0641
Electrical Equipment Mounting Base

016530641
650-405-002-0: RNCC: 3 | RNVC: 2

10 Mar 2016

5975-01-653-9825
Line Supporting Strap

016539825
810HN1428-1: RNCC: 3 | RNVC: 2
3141T45: RNCC: 5 | RNVC: 2
810HN1428: RNCC: D | RNVC: 9

13 Apr 2016

5975-01-654-0306
Interconnecting Box

016540306
8387804-10: RNCC: 3 | RNVC: 2
8387804: RNCC: D | RNVC: 9

14 Apr 2016

5975-01-655-3952
Electrical-Electronic Equipment Panel

016553952
12595528: RNCC: 3 | RNVC: 2

25 May 2016

5975-01-655-5158
Cable Reinforcing Link

016555158
13543577: RNCC: 3 | RNVC: 2

31 May 2016

5975-01-657-4304
Electrical Conduit Adapter

016574304
M24758-2BL: RNCC: 3 | RNVC: 2

12 Aug 2016

5975-01-657-4362
Stuffing Tube

016574362
M24758-15CC: RNCC: 3 | RNVC: 2

12 Aug 2016

5975-01-657-6346
Electrical-Electronic Equipment Panel

016576346
FSPST6: RNCC: 3 | RNVC: 2
206118-01: RNCC: 5 | RNVC: 2

23 Aug 2016

5975-01-658-8186
Electrical-Electronic Equipment Panel

016588186
21D0930-2: RNCC: 1 | RNVC: 2
21D0930-2: RNCC: 3 | RNVC: 9
21D0930-2: RNCC: 5 | RNVC: 2

19 Oct 2016

5975-01-658-8225
Junction Box

016588225
MB-113: RNCC: 3 | RNVC: 2
WS-SPT-01-704: RNCC: 7 | RNVC: 2

19 Oct 2016

5975-01-659-8592
Electrical Equipment Mounting Base

016598592
CMS-00444: RNCC: 3 | RNVC: 2
DOC-00473: RNCC: D | RNVC: 9

20 Dec 2016

5975-01-661-5222
Electrical Tie Down Mounting Base

016615222
0401745370: RNCC: 3 | RNVC: 2
7582K22: RNCC: 5 | RNVC: 2

7 Mar 2017

5975-01-661-6197
Cable Marker Sleeve

016616197
M6-500-1-342-WT: RNCC: 3 | RNVC: 2
PSPT-500-1-WT: RNCC: 3 | RNVC: 9

9 Mar 2017

5975-01-661-9777
Stuffing Tube Adapter

016619777
M24758-19B: RNCC: 3 | RNVC: 2

22 Mar 2017

5975-01-666-3324
Electrical Wall Plate

016663324
2CCU: RNCC: 3 | RNVC: 2
3898964: RNCC: 7 | RNVC: 2

1 Sep 2017

5975-12-350-9200
Electrical Equipment Mounting Base

123509200
5.802-028: RNCC: 3 | RNVC: 2

6 Jun 2000

5975-12-371-2914
Electrical Components Tie Down Strap

123712914
908097561: RNCC: 3 | RNVC: 2

9 Mar 2007

5975-20-007-7893
Electrical-Electronic Equipment Chassis

200077893
45056: RNCC: 3 | RNVC: 2

23 Jul 2013

5975-99-665-7524
Electrical Components Tie Down Strap

996657524
78/TYC28MX: RNCC: 3 | RNVC: 2
G406/8716 ITEM 12: RNCC: 5 | RNVC: 2
G406/8716/12: RNCC: 5 | RNVC: 2
G406/8717 ITEM 12: RNCC: 5 | RNVC: 2
G406/8717/12: RNCC: 5 | RNVC: 2
G406/8724 ITEM 18: RNCC: 5 | RNVC: 2
G406/8724/18: RNCC: 5 | RNVC: 2
G406/8726 ITEM 42: RNCC: 5 | RNVC: 2
G406/8726/42: RNCC: 5 | RNVC: 2

2 Sep 2002

5975-01-690-4508
Electrical-Electronic Equipment Chassis

016904508
940-58379-3: RNCC: 3 | RNVC: 2

12 Aug 2020

5975-01-692-9683
Electrical Conduit Adapter

016929683
710-243-0980Z1: RNCC: 3 | RNVC: 2
13599066-12: RNCC: 7 | RNVC: 2

21 Jan 2021

5975-01-684-2817
Electrical Wall Plate

016842817
93101: RNCC: 3 | RNVC: 2
UD-302-S: RNCC: 3 | RNVC: 9
SS8-40: RNCC: 5 | RNVC: 9

28 Oct 2019

5975-01-687-9054
Mounting Plate

016879054
2103652-001: RNCC: 3 | RNVC: 2

23 Apr 2020

5975-01-550-7390
Blank Panel

015507390
12489655: RNCC: 3 | RNVC: 2

26 Apr 2007

5975-01-551-8123
Cable Hanger

015518123
TYUW10313A: RNCC: 3 | RNVC: 2
8H-A33360: RNCC: D | RNVC: 9

29 May 2007

5975-01-556-3148
Conduit Outlet

015563148
HBL320R4WMIL: RNCC: 3 | RNVC: 2

1 Oct 2007

5975-01-556-6572
Electrical Nonmetallic Conduit Assembly

015566572
449632C1: RNCC: 3 | RNVC: 2
449632C1: RNCC: 5 | RNVC: 2
449632C1: RNCC: 7 | RNVC: 2

3 Oct 2007

5975-01-557-0981
Electrical Components Tie Down Strap

015570981
63122: RNCC: 3 | RNVC: 2
18102-X: RNCC: 5 | RNVC: 2
3006056: RNCC: 7 | RNVC: 2
S000193: RNCC: D | RNVC: 9

11 Oct 2007

5975-01-557-5744
Interconnecting Box

015575744
R0071657: RNCC: 3 | RNVC: 2
R0071657: RNCC: 5 | RNVC: 2
R0071657-0110: RNCC: D | RNVC: 9

25 Oct 2007

5975-01-558-7375
Insulator Bracket

015587375
7265764-1: RNCC: 3 | RNVC: 2

20 Nov 2007

5975-01-559-2046
Electrical Cable Protector

015592046
UHB4045T: RNCC: 3 | RNVC: 9

10 Dec 2007

5975-01-559-6523
Junction Box Assembly

015596523
230-00018-A3: RNCC: 3 | RNVC: 2

28 Dec 2007

5975-01-559-9961
Electrical-Electronic Equipment Panel

015599961
25122108: RNCC: 3 | RNVC: 2
85MT 445M: RNCC: 5 | RNVC: 9

11 Jan 2008

5975-01-560-1668
Electrical Tie Down Mounting Base

015601668
7565K51: RNCC: 3 | RNVC: 2

17 Jan 2008

5975-01-561-9839
Electrical Components Tie Down Strap

015619839
BT2S-CO: RNCC: 3 | RNVC: 2
BT2S-CO: RNCC: 5 | RNVC: 2
BT2S-CO: RNCC: 5 | RNVC: 9
C24704: RNCC: 5 | RNVC: 9
4100921: RNCC: 5 | RNVC: 9

25 Mar 2008

5975-01-562-6109
Electrical Components Tie Down Strap

015626109
435437A1: RNCC: 3 | RNVC: 2
473321C1: RNCC: 5 | RNVC: 9

14 Apr 2008

5975-01-562-9697
Electrical Equipment Shelf

015629697
A3256630-1: RNCC: 3 | RNVC: 2
A3256630: RNCC: D | RNVC: 9

28 Apr 2008

5975-01-563-0427
Electrical-Electronic Equipment Chassis

015630427
CATALYST 6504-E: RNCC: 3 | RNVC: 2
WS-C6504-E: RNCC: 5 | RNVC: 2

30 Apr 2008

5975-01-564-3849
Electrical Equipment Shelf

015643849
5175: RNCC: 3 | RNVC: 2
5175: RNCC: 5 | RNVC: 9

16 Jun 2008

5975-01-565-0313
Electrical Wall Plate

015650313
1007294G-1: RNCC: 3 | RNVC: 2

9 Jul 2008

5975-01-565-3020
Flexible Metal Conduit

015653020
95076735: RNCC: 3 | RNVC: 2

21 Jul 2008

5975-01-566-0217
Electrical Equipment Mounting Base

015660217
9900-17300-0001: RNCC: 3 | RNVC: 2
9800-17300-0001: RNCC: 5 | RNVC: 9
13017962: RNCC: 7 | RNVC: 2

16 Aug 2008

5975-01-562-0487
Nec Pcb Adapter

015620487
13D150314-01: RNCC: 3 | RNVC: 2

27 Mar 2008

Load More Results