NSN Lookup

Electrical Hardware and Supplies

Federal Supply Class (FSC): 5975

NATO Supply Classification Class (NSC): 5975

Group Description: Electrical and Electronic Equipment Components

Federal Supply Group (FSG): 59

NATO Supply Classification Group (NSG): 59

FSC 5975 Electrical Hardware and Supplies
FSC 5975 Electrical Hardware and Supplies

Includes Conduit; Raceways; Face Plates; Condulets; Outlet and Junction Boxes; Pole Line Hardware, not elsewhere classifiable.

Note-Mounting hardware, included in classes of this group, includes such specially designed items as brackets, holders, retainers, etc. Excluded from classes in this group are such hardware items as screws (Class 5305), bolts (Class 5306), studs (Class 5307), washers (Class 5310), rivets (Class 5320), and other common items indexed to specific classes, other than in Group 59. The FSC indexes and structure will govern the classification of items used on or with mounting hardware cited above.

Frequently Asked Questions (FAQ) for Federal Supply Class 5975

What is Federal Supply Class 5975?
FSC 5975 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5975) in the USA for supply items codified in the category of Electrical Hardware and Supplies.
What is NATO Supply Classification Class 5975?
NSC 5975 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5975 in the USA) for supply items codified in the category of Electrical Hardware and Supplies.
Which Federal Supply Group is FSC 5975 in?
FSC 5975 is in Federal Supply Group (FSG) 59 which contains .
Which NATO Supply Classification Group is NSC 5975 in?
NSC 5975 is in NATO Supply Classification Group (NSG) 59 which contains .

Supply Items Included in Federal Supply Class 5975

What is an Electrical Cable Protector? 1663 Items
AnElectrical Cable Protector(PROTECTOR,ELECTRICAL CABLE) is an item designed to be interposed between a cable and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is a Ground Rod? 815 Items
AGround Rod(ROD,GROUND) is an item designed to be driven into the earth for the purpose of establishing electrical contact. One end is pointed or tapered to facilitate entrance into the earth. See also ROD SECTION, GROUND.
What is a Junction Box Assembly? 303 Items
AJunction Box Assemblyis two or more junction boxes on a common mounting or mounted on each other. Do not use for single junction boxes which are complex or unusual in construction, or for a junction box with an extension. See also TERMINAL BOX.
What is a Flexible Metal Conduit Assembly? 1692 Items
AFlexible Metal Conduit Assembly(CONDUIT ASSEMBLY,METAL,FLEXIBLE) is a specific length of CONDUIT, METAL, FLEXIBLE with permanently attached ferrule(s), coupling nut(s), elbow(s), or the like. Excludes detachable fittings such as tee(s), wye(s), or elbow(s). Also, excludes conduit like items that are designed for other than electrical applications. See also CASING (as modified).
What is a Fanning Strip? 416 Items
AFanning Stripis an item made of rigid or semirigid insulating material for spacing or separating wire(s) and/or cable(s). For items having terminals, see TERMINAL BOARD; and INSULATOR (as modified).
What is a Pothead? 76 Items
APotheadis a form of terminator, usually used in power and telephone distribution, designed to be hermetically sealed to the cable(s) to exclude moisture. It may have terminals accessible for testing, or a junction block to facilitate the connecting of cable(s) and wire. See also SEALING FITTING, ELECTRICAL CONDUIT.
COVER,INTERCONNECTING BOX 172 Items
What is a Switch Terminal Cover? 257 Items
ASwitch Terminal Cover(COVER,SWITCH TERMINAL) is an item generally made of insulating material and used to protect switch terminals against damage, shorting and grounding. Excludes COVER, ELECTRICAL SWITCH; BASE, SWITCH and HOUSING, SENSITIVE SWITCH.
What is a Cable Terminal Chamber? 809 Items
ACable Terminal Chamber(CHAMBER,CABLE TERMINAL) is an item specifically designed to admit, protect and seal conductor groups or cables and also affords a method of conveniently distributing, terminating and interconnecting the leads.
What is a Stuffing Tube? 5925 Items
AStuffing Tubeis an item specifically designed to pass an electrical cable or tube through a continuous structure with provisions for packing so as to prevent the leakage of liquids and/or gases through the opening. May include packing nut(s), adapter(s), washer(s), gasket(s), bushing(s), packing(s), cap(s), and/or plug(s).
What is a Cord Assembly Fastener? 116 Items
ACord Assembly Fastener(FASTENER,CORD ASSEMBLY) is a fastener primarily designed to hold and secure a cord assembly so that pulling of the cord will not put a strain on the terminal connections.
What is an Electrical Grounding Plate? 965 Items
AnElectrical Grounding Plate(PLATE,ELECTRICAL GROUNDING) is a rigid or semirigid item of electrically conductive material whose thickness is small in comparsion to its length and width. It is designed to be used for electrical grounding, particularly in junction box and power outlet applications. Excludes TERMINAL STRIP, GROUNDING; CONTACT STRIP, RADIO FREQUENCY GROUNDING; and STRIP, ELECTRICAL GROUNDING.
What is a Cable Collar? 561 Items
ACable Collar(COLLAR,CABLE) is an item designed to be affixed around an electrical cable to limit the axial movement of the cable at the point where it passes through an opening. It has no facilities for retaining the cable to another object. Excludes BUSHING, STRAIN RELEIF, CABLE.
BASE,CHASSIS 600 Items
What is a Crossarm Brace? 69 Items
ACrossarm Brace(BRACE,CROSSARM) is an item specifically designed to provide reinforcement for a crossarm when mounted on a pole.
What is a Cable Hanger? 2113 Items
ACable Hanger(HANGER,CABLE) is a metallic or nonmetallic item of various shapes, designed to position, suspend, support and/or secure electrical cable(s) to utility poles, bulkheads, messenger wires or other supporting surfaces. It may be fastened to the structure by means of rod(s), bolts(s), screw(s) and the like. Excludes CLAMP (as modified); HANGER, WIRE STRAND; BRACKET PIPE; and SUPPORT, ELECTRICAL CABLE.
What is an Insulator Pin? 51 Items
AnInsulator Pin(PIN,INSULATOR) is an item designed to be inserted into a crossarm for the specific purpose of mounting pin type electrical insulators. Excludes BRACKET, INSULATOR.
What is a Stuffing Tube Plug? 296 Items
AStuffing Tube Plug(PLUG,STUFFING TUBE) is an item designed to be fitted into the body of a STUFFING TUBE in order to prevent the leakage of liquids and/or gases through the opening in the absence of the cable normally passing through the tube.
What is an Electrical Cable Support? 373 Items
AnElectrical Cable Support(SUPPORT,ELECTRICAL CABLE) is a collapsible framework specifically designed to be placed on the ground to hold electrical cable above the ground surface. Excludes BRACKET, PIPE.
What is an Electrical Conductor Bushing? 825 Items
AnElectrical Conductor Bushing(BUSHING,ELECTRICAL CONDUCTOR) is an item of metal and/or insulating material having a smooth interior with rounded edges to prevent damage to the insulation of the wire or cable emerging there-from, designed to fit through panel(s) or the wall of a JUNCTION BOX. It may be designed to snap into a knockout hole, or designed with an external thread and furnished with or without a locking nut. For items designed to couple conduit to JUNCTION BOX, see BOX CONNECTOR, ELECTRICAL. See also BUSHING, ELECTRICAL CONDUIT and BUSHING, NONMETALLIC. For items having hexagonal shoulders, see CHASE NIPPLE, CONDUIT.
What is an Insulator Bracket? 188 Items
AnInsulator Bracket(BRACKET,INSULATOR) is an item designed to be attached to a supporting surface for the specific purpose of positioning and sustaining an electrical insulator(s). Includes brackets specifically designed for transposing electrical lines.
What is a Cable Reinforcing Link? 33 Items
ACable Reinforcing Link(LINK,REINFORCING,CABLE) is an item fabricated from metal rod bent longitudinally into an oval shape, one end of which is intended to fit a messenger cable or guy wire and the opposite end formed with a mounting hole for a lag screw. This item is designed to relieve the strain where a messenger cable or wire is installed at an angle to a suspension clamp.
What is a Stuffing Tube Adapter? 325 Items
AStuffing Tube Adapter(ADAPTER,STUFFING TUBE) is a threaded or unthreaded item designed to mate with the mounting threads or mounting surfaces of a STUFFING TUBE, and to mount the STUFFING TUBE to a continuous structure (bulkhead or deck). The adapter may be recessed on the face to accommodate a gasket and/or washer.
What is a Junction Box? 6723 Items
AJunction Boxis an enclosure of other than cast metal designed to house, mount, and protect, but does not include wiring connections or electrical device(s) such as terminals and/or terminal boards, switches, jacks, fuseholders, connectors, circuit breakers and the like. It is designed for and may include a cover and such accessories as mounting hardware, brackets, locks, clamps, mounts and conduit fittings. Excludes CONDUIT OUTLET; and CHAMBER, CABLE TERMINAL. For boxes which include electrical device(s) such as terminals and/or terminal boards, switches, fuseholders, jacks, connectors, circuit breakers and the like, or combinations thereof, see SWITCH BOX; FUZE BOX; JACK BOX; TERMINAL BOX; CIRCUIT BREAKER BOX; and DISTRIBUTION BOX. For boxes wired to provide the interconnecting facilities for a specific major group of electronic items outside of the box, see INTERCONNECTING BOX. See also INTERCONNECTING CABINET.
What is an Electrical Cable Nipple? 1728 Items
AnElectrical Cable Nipple(CABLE NIPPLE,ELECTRICAL) is a preformed item having high electrical resistance designed for installation on end of cable or lead in order to cover the terminal or termination. It may partially cover the terminal of the item to which the cable or lead is attached. May also provide mechanical protection. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Equipment Cabinet? 6258 Items
AnElectrical Equipment Cabinet(CABINET,ELECTRICAL EQUIPMENT) is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. It may include wires, cables, terminal boards, connectors, etc., required for equipment operation. For items designed to accommodate equipment mounted on panels, see RACK, ELECTRICAL EQUIPMENT. See also CASE (2) (as modified). Excludes INTERCONNECTING BOX; INTERCONNECTING CABINET; JUNCTION BOX; and TERMINAL BOX.
What is an Electrical Equipment Rack? 10389 Items
AnElectrical Equipment Rack(RACK,ELECTRICAL EQUIPMENT) is an open or inclosed frame structure designed to accommodate (but does not include) electrical/electronic equipment mounted on standard width panels so that the equipment may be operated after installation without being removed. It must have panel mounting rails that provide a uniform pattern of mounting holes that will accommodate various combinations of standard width panels. It may include wires, cables, terminal boards, connectors, and the like, required for equipment operation. See also MOUNTING BASE, ELECTRICAL EQUIPMENT; CABINET, ELECTRICAL EQUIPMENT; and CASE (2) (as modified). Excludes MAIN DISTRIBUTING FRAME, TELEPHONE and INTERMEDIATE DISTRIBUTING FRAME, TELEPHONE.
What is an Electrical Entrance Cap? 98 Items
AnElectrical Entrance Cap(ENTRANCE CAP,ELECTRICAL) is an item primarily designed to provide for the entrance of electrical wires into a building, structure, or inclosure and to facilitate their connection to feeders or service conductors. It consists of an insulating block and a metallic housing designed to hold the insulating block and to fit an electrical conduit, conduit fitting, or cable of a specified size. This item is primarily intended for use in exposed, wet, or damp locations and is installed so as to preclude the entrance of rain or debris into the conduit. See also CAP, ELECTRICAL.
What is an Electrical Conduit Adapter? 2949 Items
AnElectrical Conduit Adapter(ADAPTER,ELECTRICAL CONDUIT) is an item designed to couple or join two different types or sizes of conduits, and/or to be inserted in the opening of a conduit outlet or box to accommodate a conduit of a larger or smaller size; or it may be designed with internal thread on one end for mating with an electrical connector and an external thread on the other end for mating with a conduit coupling nut; or to establish necessary mechanical accommodations between an electrical conduit, conduit assembly and an electrical connector. Excludes REDUCING WASHER, KNOCKOUT and BOX CONNECTOR, ELECTRICAL. See also ADAPTER, CABLE TO CONNECTOR; and CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Sealing Fitting? 75 Items
AnElectrical Conduit Sealing Fitting(SEALING FITTING,ELECTRICAL CONDUIT) is an item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT.
What is a Knockout Reducing Washer? 52 Items
AKnockout Reducing Washer(REDUCING WASHER,KNOCKOUT) is an item consisting of a flat, cupped or embossed metallic disk with a centerhole to fit an electrical conduit of a specified size and which is specifically designed to reduce the knockout opening in a box, panel, or wireway for the convenience of terminating electrical conduit of smaller size than the knockout. Excludes ADAPTER, ELECTRICAL CONDUIT.
What is an Electrical Conduit Nipple? 374 Items
AnElectrical Conduit Nipple(NIPPLE,ELECTRICAL CONDUIT) is a nipple made of electrical conduit.
What is an Electrical Entrance Elbow? 58 Items
AnElectrical Entrance Elbow(ENTRANCE ELBOW,ELECTRICAL) is an item of metallic composition cast in the form of an elbow, which is primarily intended to provide for the angular entrance of wires into a building, structure, or enclosure. This item, specifically designed for installation in exposed locations, has two hubs of a specified size to fit the service entrance conduit and may have a third hub for a driven ground connection. It has a cover which makes it tamper-proof and weather-resistant. It may include facilities for pulling electrical conductors but does not have facilities for mounting wiring devices.
What is an Electrical Conduit Bushing? 488 Items
AnElectrical Conduit Bushing(BUSHING,ELECTRICAL CONDUIT) is an item of metal and/or insulating material having internal threads designed to fit over the end of electrical conduit and/or fittings to provide a smooth interior with a rounded edge to prevent damage to the insulation of the wire or cable emerging therefrom. It may be designed to fit over the end of thin wall conduit, and to be fitted with holding (staking) screws, or it may be provided with internal straight threads for attaching to thick wall electrical conduit or fittings. It may be fitted with a temporary knockout cap (bushcap), and grounding or bonding facilities. For externally threaded items, see BOX CONNECTOR, ELECTRICAL; BUSHING, ELECTRICAL CONDUCTOR; CHASE NIPPLE, CONDUIT and BUSHING, STRAIN RELIEF, CABLE. See also FERRULE, ELECTRICAL CONDUIT. Excludes plain sleeve bushings.
What is an Electrical Conduit Bondnut? 58 Items
AnElectrical Conduit Bondnut(BONDNUT,ELECTRICAL CONDUIT) is an item of metallic composition, with internal threads, designed to fit the external threads of an electrical conduit or fitting, and which, when installed, provides a method of tightening and locking the connection and completes a positive bond between the conduit and apparatus or fitting to which connected. The bonding or grounding action is accomplished by sharp beveled teeth or by a screw(s). See also LOCKNUT, ELECTRICAL CONDUIT and NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Union? 186 Items
AnElectrical Conduit Union(UNION,ELECTRICAL CONDUIT) is an item comprising three members, so constructed that one of the members holds the remaining two in a fixed butted position; generally used to connect two conduits, conduit fittings, or a conduit and a conduit fitting in such a manner that they may be disconnected without disturbing the rest of the conduit line. See also COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Elbow? 565 Items
AnElectrical Conduit Elbow(ELBOW,ELECTRICAL CONDUIT) is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. If a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. It is primarily intended to connect conduit to conduit. It may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. For items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see ENTRANCE ELBOW, ELECTRICAL. For items with one end having a male thread with a boss or shoulder, see BOX CONNECTOR, ELECTRICAL. For items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see ENTRANCE ELBOW, ELECTRICAL. For items fabricated in the form of an elbow having both ends threaded male, see BEND, ELECTRICAL CONDUIT.
What is a Conduit Outlet? 1567 Items
AConduit Outletis an item designed to be used in a conduit system for the purpose of providing outlets or attachments for electrical wiring devices and/or designed to provide access and facilitate installment of wires. It may or may not include a cover(s). It does not include wiring devices. Excludes ENTRANCE ELBOW, ELECTRICAL. See also JUNCTION BOX.
What is an Electrical Conduit Bend? 265 Items
AnElectrical Conduit Bend(BEND,ELECTRICAL CONDUIT) is an item fabricated in the form of a curved section specifically designed to mechanically join a conduit or conduit fitting to another conduit or conduit fitting. Items of this type do not have a boss or hub at either end, nor do they have facilities for mounting wiring devices or pulling electrical conductors. See also ELBOW, ELECTRICAL CONDUIT and CONDUIT OUTLET.
What is an Electrical Wall Plate? 1192 Items
AnElectrical Wall Plate(PLATE,WALL,ELECTRICAL) is an item designed to mount directly on a bracket or an electrical current carrying wiring device(s) such as switch(es) or outlet(s) (receptacle). The bracket(s) or electrical current carrying device is mounted in a JUNCTION BOX. For trade designated items designed to be attached directly on or through a bracket or electrical wiring device to a CONDUIT OUTLET, see COVER, CONDUIT OUTLET. For items designed for mounting directly on a JUNCTION BOX, see COVER, JUNCTION BOX.
What is an Interconnecting Box? 2649 Items
AnInterconnecting Boxis an inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.
What is an Electrical Rosette? 49 Items
AnElectrical Rosette(ROSETTE,ELECTRICAL) is an item designed for the connection and support of an electrical drop cord.
What is a Pole Step? 15 Items
APole Step(STEP,POLE) is an item designed to be used as a foot rest in ascending and descending utility poles, when attached thereto.
What is an Underground Cable Rack? 14 Items
AnUnderground Cable Rack(RACK,CABLE,UNDERGROUND) is an item designed for the purpose of supporting cable(s). It is shaped like a channel and has a U like cross section with through holes, slots and the like, along the length. When mounted in the vertical position it will accept hooks which extend out perpindicularly from the surface to support cable(s). The item does not include hooks. See also RACK, CABLE, INTERIOR.
What is an Interior Cable Rack? 588 Items
AnInterior Cable Rack(RACK,CABLE,INTERIOR) is an open frame structure primarily designed to support electrical cables in buildings and shelters. Its purpose is to provide, by itself or by joining to similar structures, a path or runway for cable which may connect two or more pieces of electrical equipment. It does not include items designed to hold a single cable. See also RACK, CABLE, UNDERGROUND; and HANGER, CABLE.
What is an Electrical Conduit Ferrule? 497 Items
AnElectrical Conduit Ferrule(FERRULE,ELECTRICAL CONDUIT) is an item usually of one piece construction, but which may be comprised of more than one piece, designed to be affixed permanently or temporarily to the end of an electrical conduit to form an end fitting. Unflanged items form a permanent end fitting which affords mechanical protection to emerging conductors. Flanged items are used with another fitting normally a conduit coupling nut, to make the conduit adaptable for connection to an electrical connector, junction box or other conduit accessory or fitting. Excludes RING, ELECTRICAL BONDING; BUSHING, ELECTRICAL CONDUIT; and BUSHING, PLAIN SLEEVE. See also FERRULE-NUT COUPLING, ELECTRICAL CONDUIT.
What is an Underground Cable Rack Hook? 13 Items
AnUnderground Cable Rack Hook(HOOK,UNDERGROUND CABLE RACK) is a rigid item designed to be perpendicularly attached to an underground cable rack to be used as the supporting arm for cables. May include insulators.
What is an Electrical Conduit End Seal Disk? 34 Items
AnElectrical Conduit End Seal Disk(DISK,END SEAL,ELECTRICAL CONDUIT) is a flat circular item fitted on the end of an electrical conduit in order to close the end to prevent the entrance of water or refuse, prior to installation of the wires, during shipment and/or construction. The item may be held in place by means of a conduit bushing and may be easily removed to permit installation of the wires.
What is a Cable Spacer? 122 Items
ACable Spacer(SPACER,CABLE) is an item constructed specifically to provide a separation between lashed lead covered cable and messenger strand for the prevention of injury to sheath of cable.
What is an Electrical Box Connector? 2049 Items
AnElectrical Box Connector(BOX CONNECTOR,ELECTRICAL) is an item designed to mechanically connect in a straight line or an angle electrical conduit, conduit assemblies, wire, wireway, cable, or cable assemblies to a point of termination, such as a junction box, conduit outlet, or the like. The termination end must have an external thread with a boss or shoulder and may be furnished with a locknut or bondnut; or, must have internal thread with which is furnished an externally threaded hub with a wrenching feature; or be of a snap-in type that may be installed from either inside or outside the box and secured with a captive screw. It is not intended to join conduit to conduit. For angle type items having a male thread without a boss or shoulder, see ELBOW, ELECTRICAL CONDUIT. Does not include facilities to mount wiring devices. Excludes CHASE NIPPLE, CONDUIT.
What is an Electrical Conduit Coupling? 641 Items
AnElectrical Conduit Coupling(COUPLING,ELECTRICAL CONDUIT) is an item specifically designed and constructed to mechanically connect in a straight line two sections of electrical conduit or like fabrication and of the same size. For three-piece items which may be disassembled without disturbing the rest of the conduit line, see UNION, ELECTRICAL CONDUIT. See also ADAPTER, ELECTRICAL CONDUIT; POTHEAD; and SEALING FITTING, ELECTRICAL CONDUIT.
What is an Electrical Conduit Wye? 202 Items
AnElectrical Conduit Wye(WYE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter Y, having three hubs permitting conduits and/or conduit fittings to be taken off laterally from the main line of equal degree on each side, or with the main line continuing straight with a branch taking off at an angle. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Cable Rack Extension? 68 Items
ACable Rack Extension(EXTENSION,CABLE RACK) is a metallic irregularly shaped item designed to permit cable racks to be mounted away from the mounting surface to escape obstructions or limited space.
What is an Electrical Bonding Ring? 188 Items
AnElectrical Bonding Ring(RING,ELECTRICAL BONDING) is an item of metallic composition, usually round and flat with a center hole or slotted hole designed to accommodate an electrical cable or conduit, and which, when used in conjunction with a cable clamp or similar locking device, completes a positive bond between the cable or conduit fitting, such as connectors, adapters, and couplings, and the cable or conduit shield and/or individual conductor shield(s). See also FERRULE, ELECTRICAL CONDUCTOR.
What is an Electrical Equipment Rack Base? 354 Items
AnElectrical Equipment Rack Base(BASE,ELECTRICAL EQUIPMENT RACK) is a structural item which is specifically designed to provide a suitable flat surface to support one or more RACK, ELECTRICAL EQUIPMENT. It may include legs and/or leveling devices. For similar items designed primarily for the purpose of damping shock and/or vibration, see MOUNTING BASE, ELECTRICAL EQUIPMENT. See also STAND, (as modified).
What is an Electrical Cable Splice Protector? 74 Items
AnElectrical Cable Splice Protector(PROTECTOR,SPLICE,ELECTRICAL CABLE) is an item specifically designed to be mechanically fastened to an electrical cable on each end of a splice to protect the splice from excessive strain. It usually has provisions for making a waterproof or moisture-proof joint. Excludes INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Conduit Coupling Nut? 343 Items
AnElectrical Conduit Coupling Nut(NUT,COUPLING,ELECTRICAL CONDUIT) is an item of metallic composition with internal threads and an internal seat designed to join a ferrule capped conduit to a fitting. See also BONDNUT, ELECTRICAL CONDUIT.
What is an Insulator Bracket Strap? 24 Items
AnInsulator Bracket Strap(STRAP,INSULATOR BRACKET) is an item specifically designed to reinforce insulator brackets at their fastenings on a line construction pole when high strength wire or long spans are used.
What is a Junction Box Cover? 1391 Items
AJunction Box Cover(COVER,JUNCTION BOX) is a cover containing facilities for mounting directly on a JUNCTION BOX. It may have provisions for the insertion and/or mounting of electrical devices, such as switches, connectors, additional covers, and jewels. It may include the jewel(s). For covers having facilities for mounting on brackets or on current carrying devices such as switches and receptacle connectors, see PLATE, WALL, ELECTRICAL. See also COVER, CONDUIT OUTLET.
What is a Wire Strand Hanger? 36 Items
AWire Strand Hanger(HANGER,WIRE STRAND) is a metallic item, grooved to fit a wire strand such as a messenger strand, and designed to be attached to a utility pole or other supporting surface for the purpose of horizontally suspending and firmly securing the wire strand. See also HANGER, CABLE, and CLAMP, ELECTRICAL CONDUCTOR, STRAIN. Excludes BRACKET, PIPE.
What is an Electrical Conduit Cross? 17 Items
AnElectrical Conduit Cross(CROSS,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of a cross having four hubs in the same plane, the axes of which form a right angle, and primarily intended to join electrical conduits and/or conduit fittings. For items of this type having ties for mounting wiring devices, see CONDUIT OUTLET.
What is an Electrical Conduit Tee? 197 Items
AnElectrical Conduit Tee(TEE,ELECTRICAL CONDUIT) is a type of electrical conduit fitting fabricated in the form of the letter T having three hubs for joining electrical conduits and/or conduit fittings. For items of this type having facilities for mounting wiring devices, see CONDUIT OUTLET.
What is a Blank Panel? 3684 Items
ABlank Panel(PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
CASE,ELECTRICAL EQUIPMENT CABINET 243 Items
CASE,SWITCH BOX 252 Items
What is a Ground Rod Section? 46 Items
AGround Rod Section(ROD SECTION,GROUND) is an item which is part of a multi-section ground rod. Excludes items with driving points. see also ROD, GROUND.
What is a Junction Box Extension? 79 Items
AJunction Box Extension(EXTENSION,JUNCTION BOX) is an item designed to be mounted on a JUNCTION BOX to increase the depth of the box.
What is a Stuffing Tube Packing Nut? 627 Items
AStuffing Tube Packing Nut(PACKING NUT,STUFFING TUBE) is a threaded or unthreaded device, with an unthreaded center hole to accommodate an electrical cable or tube, designed to mate with the threads or sealing components of a stuffing tube body for the purpose of compressing packing around the electrical cable or tube. A component of a STUFFING TUBE.
What is a Wire Strand Hanger Safety Strap? 10 Items
AWire Strand Hanger Safety Strap(STRAP,SAFETY,WIRE STRAND HANGER) is an item primarily designed to be attached to a cable suspension clamp mounting bolt, providing a guard or loop below the mounting bolt to support the cable should the messenger fail.
What is a Wire Strand Hanger Support Strap? 14 Items
AWire Strand Hanger Support Strap(STRAP,SUPPORT,WIRE STRAND HANGER) is an item primarily designed to provide additional support to the end of the clamp mounting bolt by transmitting a portion of the stresses to the pole or supporting member.
What is a Transmission Line Grounding Set? 87 Items
ATransmission Line Grounding Set(GROUNDING SET,TRANSMISSION LINE) is an item consisting of two or more clamp type devices with facilities for the connection of jumpers and/or grounding cables. When installed this item provides for the temporary grounding of de-energized electrical transmission line(s) to protect workmen against injury resulting from accidental re-energization of the lines. Excludes CLAMP, ELECTRICAL.
What is a Cable Marker Sleeve? 13710 Items
ACable Marker Sleeve(SLEEVE,MARKER,CABLE) is a cylindrical item into which a wire or cable is inserted. It is inscribed for identification, to indicate connections or routing of electrical cables and the like. For unmarked items made of insulation material, see INSULATION SLEEVING, ELECTRICAL. For items secured by crimping, slot and tongue, or other similar methods of fastening, see BAND, MARKER.
What is an Electrical Standardized Components Case? 469 Items
AnElectrical Standardized Components Case(CASE,STANDARDIZED COMPONENTS,ELECTRICAL) is a case which by virtue of standardization of equipment dimensions is designed to contain one or more components of different basic names. Do not use for cases designed only for specific items or a specific grouping of items.
What is an Electrical Conduit Ferrule-Nut Coupling? 29 Items
AnElectrical Conduit Ferrule-Nut Coupling(FERRULE-NUT COUPLING,ELECTRICAL CONDUIT) is an item consisting of a FERRULE, ELECTRICAL CONDUIT upon which is permanently mounted a NUT, COUPLING, ELECTRICAL CONDUIT. It is designed to be attached to an electrical conduit and used to mechanically connect the conduit to another conduit fitting such as a box connector. Excludes BOX CONNECTOR, ELECTRICAL; ADAPTER, ELECTRICAL CONDUIT; and COUPLING, ELECTRICAL CONDUIT.
What is a Strain Electrical Conductor Clamp? 454 Items
AStrain Electrical Conductor Clamp(CLAMP,ELECTRICAL CONDUCTOR,STRAIN) is a clamp designed to support and/or dead end a suspended conductor(s). Must have a provision for attachment to an insulator. Insulator is not included. Excludes HANGER, WIRE STRAND.
What is an Electrical Entrance Cap Shell? 22 Items
AnElectrical Entrance Cap Shell(SHELL,ELECTRICAL ENTRANCE CAP) is an item similar to ENTRANCE CAP, ELECTRICAL, but it does not include an insulating block. See also CAP, ELECTRICAL.
What is a Flexible Metal Conduit? 892 Items
AFlexible Metal Conduit(CONDUIT,METAL,FLEXIBLE) is a conduit constructed of circular flexible metal tubing. It may be shielded with a woven metal wire braid covering, with a packing between the joints, and it may have a rubber and/or synthetic rubber or plastic outer protective covering. It contains no fittings. See also CONDUIT, METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Metal Conduit? 978 Items
ARigid Metal Conduit(CONDUIT,METAL,RIGID) is a conduit of one-piece tubular construction, designed as thin wall type (EMT) and thick wall type. The items may be threaded and furnished with a COUPLING, ELECTRICAL CONDUIT and/or thread protection. See also CONDUIT ASSEMBLY,METAL, RIGID. Excludes conduit like items that are designed for other than electrical applications.
What is a Rigid Nonmetallic Conduit? 427 Items
ARigid Nonmetallic Conduit(CONDUIT,NONMETALLIC,RIGID) is a conduit of one piece construction of asbestos and cement, bituminized fiber, or rigid plastics material. The item may have both ends processed for connection by means of a coupling. One coupling may be furnished for each length of conduit. The conduit may or may not be impregnated with coal tar pitch. Excludes conduit like items that are designed for other than electrical applications.
What is a Radio Frequency Cable Splicing Kit? 56 Items
ARadio Frequency Cable Splicing Kit(SPLICING KIT,RADIO FREQUENCY CABLE) is a collection of items used in splicing a radio frequency cable, such as yokes, plugs, cable, switches, and power transformer.
What is a Drive Ring? 46 Items
ADrive Ringis a metal item having an eye attached or integral with a nail-like item. It is designed for running twisted pair, bridle, or parallel drop wires on building walls, fences, poles and the like. For similar items having threaded ends, see BRIDLE RING. Excludes HOOK, SUPPORT.
What is a Bridle Ring? 16 Items
ABridle Ringis a metal item having an open eye on one end and a wood screw, or machine thread on the opposite end. The machine thread item may be furnished with a nut or toggle attachment. It is designed for running twisted pair, bridle or parallel drop wires on building walls, fences, poles, and the like. For similar items having a drive nail end, see DRIVE RING. Excludes HOOK, SUPPORT.
What is an Electrical Equipment Leg? 320 Items
AnElectrical Equipment Leg(LEG,ELECTRICAL EQUIPMENT) is an item which, in conjunction with one or more similar items, aids in the support of electrical equipment. See also LEG SECTION, ELECTRICAL EQUIPMENT.
What is an Electrical Equipment Leg Section? 128 Items
AnElectrical Equipment Leg Section(LEG SECTION,ELECTRICAL EQUIPMENT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form an electrical equipment leg.
What is a Conduit Chase Nipple? 146 Items
AConduit Chase Nipple(CHASE NIPPLE,CONDUIT) is an externally threaded item having a hexagonal shoulder with a smooth bore. It may be used to connect two junction boxes or to accommodate thin wall conduit or tubing by slip fit to a junction box or conduit outlet. It may or may not be furnished with a locknut. For items externally and internally threaded, see ADAPTER, ELECTRICAL CONDUIT. See also BUSHING, ELECTRICAL CONDUCTOR.
What is a Cable Strain Relief Bushing? 485 Items
ACable Strain Relief Bushing(BUSHING,STRAIN RELIEF,CABLE) is an insulating item designed to prevent movement along the axis of an electric wire or cable in either direction when placed in the chassis of such items as electric fans, irons, drills, motors, radios, clocks and the like. It may be designed for use in the central column of a gun mount and the like. See also COLLAR, CABLE.
What is an Electrical Nonmetallic Conduit Assembly? 1445 Items
AnElectrical Nonmetallic Conduit Assembly(CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL) is a specific length of tubing or conduit, nonmetallic, rigid or flexible, with or without electrical rating, and with permanently attached ferrule(s), coupling nut(s), or the like. It may include one or more woven wire braid cover(s). Excludes detachable fittings such as tee(s), wye(s) or elbow(s). Also excludes conduit like items that are designed for other than electrical applications.
What is a Conduit Outlet Cover? 543 Items
AConduit Outlet Cover(COVER,CONDUIT OUTLET) is an item of any material, with or without threads, designed to mate with a CONDUIT OUTLET or a SEALING FITTING, ELECTRICAL CONDUIT. It may be designed as a removable side plate cover with or without hubs. It may have provisions for draining or venting. It may be designed for the insertion and/or mounting of electrical devices, such as switches, receptacle connectors, and indicator light lenses. It may include mechanisms for the external operation of switches but does not include the wiring devices. For items designed to mount directly on a bracket or an electrical current carrying wiring device, see PLATE, WALL, ELECTRICAL. See also COVER, JUNCTION BOX.
What is an Electrical Conduit Coupling Nut Clamp? 53 Items
AnElectrical Conduit Coupling Nut Clamp(CLAMP,COUPLING NUT,ELECTRICAL CONDUIT) is an item designed to be clamped on a conduit. It has extending prongs to engage and lock in position a NUT, COUPLING, ELECTRICAL CONDUIT.
What is an Electrical Equipment Shelf? 1252 Items
AnElectrical Equipment Shelf(SHELF,ELECTRICAL EQUIPMENT) is an item relatively thin in its vertical dimension, designed to provide a horizontal working surface on the front of a CABINET, ELECTRICAL EQUIPMENT or a RACK, ELECTRICAL EQUIPMENT. May include wiring, power outlets and similar accessories. May be furnished with slides to permit stowing within the cabinet or rack when not in actual use.
What is a Shop Set Installation Electrical Kit? 51 Items
AShop Set Installation Electrical Kit(ELECTRICAL KIT,SHOP SET INSTALLATION) is a collection of wiring and fixture items, such as box, cable, connector, cord, cover, cutout, fuse, receptacle, socket, switch, and the like, designed to wire shop set equipment when installing it in a shop truck as part of the basic load.
What is a Line Supporting Strap? 40 Items
ALine Supporting Strap(STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is an Electrical Conduit Locknut? 476 Items
AnElectrical Conduit Locknut(LOCKNUT,ELECTRICAL CONDUIT) is an item having internal threads designed to fit the external threads of an electrical conduit or fitting for connecting to a junction box, panel, wireway, or other point of termination, and which, when installed, provides a method of tightening to lock the connection. The items may be either flat-sided or circular in external shape and must have a specific conduit size designation. SEE BONDNUT, ELECTRICAL CONDUIT and LOCKNUT, TUBE FITTING. Excludes NU T (1), PLAIN HEXAGON.
What is a Flexible Nonmetallic Conduit? 1669 Items
AFlexible Nonmetallic Conduit(CONDUIT,NONMETALLIC,FLEXIBLE) is a conduit of one piece flexible, nonmetallic, tubular construction. The item may have an outer covering for additional mechanical protection, a woven wire braid for interference suppression, and/or wire reinforcement. For items having rated electrical characteristics, see INSULATION SLEEVING, ELECTRICAL. Excludes TUBING, NONMETALLIC; and TUBING, PLASTIC, SPIRAL WRAP. Excludes conduit like items that are designed for other than electrical applications.
What is an Electrical Equipment Drawer? 3750 Items
AnElectrical Equipment Drawer(DRAWER,ELECTRICAL EQUIPMENT) is an item designed to slide in and out of a CABINET, ELECTRICAL EQUIPMENT or RACK, ELECTRICAL EQUIPMENT and used to mount and/or store electrical/electronic equipment. It does not include the electrical/electronic equipment, but may include wires, cables, terminal boards, connectors, etc.
What is an Electrical Equipment Mounting Base? 9389 Items
AnElectrical Equipment Mounting Base(MOUNTING BASE,ELECTRICAL EQUIPMENT) is a tray or racklike item designed to provide a supporting surface to which electrical/electronic equipment may be secured when installed in aircraft, vehicles, or other types of mobile equipment. It may be equipped with shock or vibration isolation devices and/or wires, cables, terminal boards, connectors, etc. Excludes BASE, ELECTRICAL EQUIPMENT RACK and MOUNT, RESILIENT. See also RACK, ELECTRICAL EQUIPMENT.
What is an Electronic Junction Rack? 980 Items
AnElectronic Junction Rack(RACK,ELECTRONIC JUNCTION) is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (TERMINAL BOARD; TERMINAL (1), FEEDTHRU; and the like). The item may consist of separable or nonseparable channels, mounting blocks and fastening devices. Mounting blocks are designed so the assembly can be mounted on panels or bulkheads. Tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. Excludes RACK, ELECTRICAL EQUIPMENT; TERMINAL BOARD; JUNCTION BOX; and HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Safety Shorting Probe? 23 Items
ASafety Shorting Probe(PROBE,SAFETY SHORTING) is a device used to discharge the voltage stored in cathode ray tubes and other electronic equipment which have capacitor type filtering circuits that retain a voltage charge after the primary power has been removed. See also DISCHARGER, ELECTROSTATIC.
What is an Electrical Tie Down Mounting Base? 985 Items
AnElectrical Tie Down Mounting Base(MOUNTING BASE,TIE DOWN,ELECTRICAL) is an item used in conjunction with STRAP, TIEDOWN, ELECTRICAL COMPONENTS to secure wire(s) or cable(s) to a supporting surface.
What is a Raceway Cover? 580 Items
ARaceway Cover(COVER,RACEWAY) is an item used in conjunction with open style raceway for the protection of electrical wires and/or cables. May be attached by snap closure, stud and nut, or similar device. Generally furnished in bulk quantities.
RACEWAY,METALLIC 1662 Items
RACEWAY,NONMETALLIC 1076 Items
What is an Electrical-Electronic Equipment Panel? 9426 Items
AnElectrical-Electronic Equipment Panel(PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT) is a panel which is designed to accommodate, but does not include connectors, displays, indicators, jacks, meters, switches, and the like. It may include clinch nuts or fastening devices as part of the item. Excludes PANEL, BLANK.
What is an Electric Cable Joint Box? 168 Items
AnElectric Cable Joint Box(JOINT BOX,ELECTRIC CABLE) is a special box made of cast metal, molded or shrinkable plastic which encases the electric connections of two or more electric cables, protects them against tensions and other excessive wear by means of mechanical attachment to the cable covering, and keeps moisture, gasses, and other environmental conditions away from the splicing by means of sealing it with a special casting compound or by heatshrinkage or bonding. The JOINT BOX, ELECTRIC CABLE as a rule is buried in the ground or put on a cable rack and is not reusable. Assembly accessories may be included.
What is an Electric Cable Joint Box Supplementary Equipment? 28 Items
AnElectric Cable Joint Box Supplementary Equipment(SUPPLEMENTARY EQUIPMENT,JOINT BOX,ELECTRIC CABLE) is a pre-determined combination of different accessories which are packed as a set and are used as supplement to the normal assembly accessories of the JOINT BOX, ELECTRIC CABLE.
What is an Electrical-Electronic Equipment Chassis? 10911 Items
AnElectrical-Electronic Equipment Chassis(CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT) is a box, frame, or plate fabricated of electrically conductive material designed to mount, but which does not include, electronic components and their associated circuitry. It may have facilities for attachment to a rack or cabinet or to accommodate specially designed components. It may include a shielding function, integral wiring, and mounting hardware as part of the item. Excludes MOUNTING BASE, ELECTRICAL EQUIPMENT.
What is a Raceway Elbow? 312 Items
ARaceway Elbow(ELBOW,RACEWAY) is an angular section of RACEWAY for making turns in a run of RACEWAY.
What is a Mounting Plate? 369 Items
AMounting Plate(PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is an Electrical Conduit Ferrule Anchor Plate? 30 Items
AnElectrical Conduit Ferrule Anchor Plate(ANCHOR PLATE,ELECTRICAL CONDUIT FERRULE) is a piece of flat material, specially designed to secure a FERRULE, ELECTRICAL CONDUIT.
What is a Nonmetallic Raceway Assembly? 196 Items
ANonmetallic Raceway Assembly(RACEWAY ASSEMBLY,NONMETALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item forms part of bulk quantities which have been specially treated and provided with miter heads and/or mounting holes, for example. It may also be produced in one piece by special molding processes such as thermoplastic pressure die-casting. The item protects electrical wires and/or cables against mechanical damage. Excludes RACEWAY (1), NONMETALLIC.
What is a Metallic Raceway Assembly? 445 Items
AMetallic Raceway Assembly(RACEWAY ASSEMBLY,METALLIC) is a channel consisting of one or more parts with other than circular cross sections. The item is not supplied in bulk quantities and has a particular shape with specific dimensions conforming to a predetermined cable run (e.g., angular or U-shape). The item protects cables against damage. Excludes RACEWAY (1), METALLIC.
What is a Cable Crosshead? 60 Items
ACable Crosshead(CROSSHEAD,CABLE) is an item consisting of preformed material, cable clamps, a cover sheet and mounting hardware. It is designed for supporting and securing communication equipment interconnect cables with cable clamps in cases where the communication equipment is mounted in frame-type racks facing each other. The item has fixed dimensions and is prefabricated to a specific shape. It forms part of an INSTALLATION KIT (1), ELECTRONIC EQUIPMENT (e.g., for cabins). Excludes RACEWAY (1), METALLIC; RACEWAY ASSEMBLY, METALLIC; RACEWAY (1), NONMETALLIC; RACEWAY ASSEMBLY, NONMETALLIC.
What is an Electrical Box Sealing Flange? 31 Items
AnElectrical Box Sealing Flange(FLANGE,SEALING,ELECTRICAL BOX) is an item designed for tightly sealing those openings of a JUNCTION BOX towards the outside or inside that are neither provided for being connected with other JUNCTION BOX nor for cable entry. Excludes FLANGE, ADAPTER, ELECTRICAL BOX and FLANGE, ELECTRICAL BOX ENTRY.
What is an Electrical Box Entry Flange? 75 Items
AnElectrical Box Entry Flange(FLANGE,ELECTRICAL BOX ENTRY) is an item designed for tightly sealing the openings of a JUNCTION BOX, provided for cable entry, towards the inside or outside. It may include openings or knock-out holes with or without threads that are provided for the installation of STUFFING TUBE or other cable entries. Excludes FLANGE, SEALING, ELECTRICAL BOX and FLANGE, ADAPTER, ELECTRICAL BOX.
What is an Electrical Box Adapter Flange? 23 Items
AnElectrical Box Adapter Flange(FLANGE,ADAPTER,ELECTRICAL BOX) is an item which, through assembly of two or more JUNCTION BOX, forms a distribution system tightly sealing the junction openings towards the outside. Excludes FLANGE, ELECTRICAL BOX ENTRY and FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Box Divider? 61 Items
AnElectrical Box Divider(DIVIDER,ELECTRICAL BOX) is a plate mounted vertically to the floor of a JUNCTION BOX which divides the interior of the box thus separating two or more electrical circuits or a plate compartmentalizing or sealing off one or more connection openings which occur when several JUNCTION BOX are connected to form a distribution section. Excludes FLANGE, SEALING, ELECTRICAL BOX.
What is an Electrical Equipment Foot? 272 Items
AnElectrical Equipment Foot(FOOT,ELECTRICAL EQUIPMENT) is an item which in conjunction with an electrical equipment leg or the like, aids in the support of electrical equipment. It is a broad based metallic or nonmetallic item which serves as a stabilizer.
What is an Electrical Standardized Components Case Section? 39 Items
AnElectrical Standardized Components Case Section(CASE SECTION,STANDARDIZED COMPONENTS,ELECTRICAL) is an item of various shapes or design representing an integral part of a CASE (2), STANDARDIZED COMPONENTS, ELECTRICAL. It may include fastening, sealing, padding and/or locking devices. It does not include components.
What is a Guide Rail? 820 Items
AGuide Rail(RAIL,GUIDE) is an item used for fixing/mounting TERMINAL JUNCTION BLOCK, SECTIONAL.
What is an Electronic Equipment Mounting Tray? 1989 Items
AnElectronic Equipment Mounting Tray(TRAY,MOUNTING,ELECTRONIC EQUIPMENT) is an item which facilitates the mounting of electronic/electrical equipment(s) into racks and the like, having holes and/or clamping devices enabling quick replacement of the mounted equipment. does not include the equipment for which designed. may include interconnecting facilities and resilient mountings. excludes DRAWER, ELECTRICAL EQUIPMENT, RACK MOUNTED; DRAWER, ELECTRICAL EQUIPMENT CABINET; CHASSIS, ELECTRICAL EQUIPMENT and PLATE, MOUNTING, ELECTRICAL EQUIPMENT.
What is an Electrical Conductor Protector? 34 Items
AnElectrical Conductor Protector(PROTECTOR,ELECTRICAL CONDUCTOR) is an item designed to be interposed between an electrical conductor which may be bare or insulated and its support or housing to prevent chafing caused by contraction and expansion due to changes in the ambient temperature or damage or injury from outside sources. Excludes such items as loom, cotton sleeving, rubber blankets, grade clamps, and all types of conduit and INSULATION SLEEVING, ELECTRICAL.
What is an Electrical Fitting Mounting Base? 272 Items
AnElectrical Fitting Mounting Base(BASE,MOUNTING,ELECTRICAL FITTING) is an item serving as a base for electrical pieces such as switches, ceiling roses. It is usually recessed at the base for accommodating wires.
What is an Aircraft Equipment Quick Disconnect Handle? 10 Items
AnAircraft Equipment Quick Disconnect Handle(HANDLE,QUICK DISCONNECT,AIRCRAFT EQUIPMENT) is a specially designed handle having an internal lock mechanism. It has two headed ends which mate two housing equipment apertures. When the trigger is actuated one of these ends moves laterally and locks the handle in the housing electrical/electronic equipment. It is used to facilitate handling of equipment which must be installed or replaced depending on aircraft missions.
What is a Rigid Metal Conduit Assembly? 776 Items
ARigid Metal Conduit Assembly(CONDUIT ASSEMBLY,METAL,RIGID) is a straight or prebent length of a CONDUIT, METAL, RIGID complete with permanently attached fitting(s), such as flanges, wye(s) and tee(s). See also TUBE ASSEMBLY, METAL and CASING (as modified). Excludes conduit like items that are designed for other than electrical applications.
What is an Interconnecting Cabinet? 261 Items
AnInterconnecting Cabinetis an enclosure, the principal purpose of which is to house, protect, and provide a connecting or branching point for one or more electrical circuits. It is wired to provide the interconnecting facilities for a specific group of electrical and/or electronic items outside of the interconnecting cabinet. It may contain parts such as capacitors, resistors, fuses, relays and terminal boards. In addition, it includes panel(s) on which are mounted control and instrumenation devices associated with the internal components of the cabinet. For items not including such panels. See CABINET, ELECTRICAL EQUIPMENT. See also CIRCUIT BREAKER BOX; DISTRIBUTION BOX; INTERCONNECTING BOX; JUNCTION BOX and TERMINAL BOX.
What is an Electrical Cable Assembly Protector? 207 Items
AnElectrical Cable Assembly Protector(PROTECTOR,ELECTRICAL CABLE ASSEMBLY) is an item specifically designed to protect an electrical cable assembly from damage by other items during assembly and/or disassembly operations of associated equipment. Excludes such items as loom, cotton sleeving, rubber blankets, all types of conduit, INSULATION SLEEVING, ELECTRICAL and PROTECTOR, ELECTRICAL CABLE.
What is an Electrical Components Tie Down Strap? 3669 Items
AnElectrical Components Tie Down Strap(STRAP,TIE DOWN,ELECTRICAL COMPONENTS) is a preformed item of flexible or semiflexible material of various cross-sectional shapes. It may be tapered to a point at one or both ends, or provided with holes, slots, detents, or other locking devices. It is designed to surround wiring harnesses and other electrical/electronic components. It may be preprinted with legendary characters, symbol(s), letter(s), numeral(s), or color coded, and may be provided with means for securing to other objects. Excludes BAND, MARKER; CLAMP, ELECTRICAL; CLAMP, LOOP; MARKER, IDENTIFICATION; and STRAP, RETAINING.
What is an Electric Component Rail Guide Stop? 27 Items
AnElectric Component Rail Guide Stop(STOP,RAIL GUIDE,ELECTRIC COMPONENT) is a metallic or nonmetallic item or various shapes designed to be attached at the end of a RAIL,GUIDE to prevent movement of electric component. It may include facilities for a pin, set screw, or the like to allow for adjustment.
What is a Raceway End Cap? 11 Items
ARaceway End Cap(END CAP,RACEWAY) is an item which is used to close right and or left side of RACEWAY (WITH MODIFIER).
What is an Electrical Cable Ground Guard? 21 Items
AnElectrical Cable Ground Guard(GUARD,GROUND,ELECTRICAL CABLE) is a metallic or nonmetallic item of various shape designed to be placed on floor to protect onr or several electrical cable or cord from damages caused by the personnel vehicular, equipment and the like. Excludes: PROTECTOR,ELECTRICAL CABLE and PROTECTOR,ELECTRICAL CABLE ASSEMBLY.

Stock Items From Supply Class 5975

NSNNameStatus
5975-01-498-8837    INSULATED LOOM CLAMP 1/2" HFE
5975-14-440-2778    CHASSIS/TIROIR,FONC
5975-15-232-0094    MODULO ST/ST NERO
5975-27-040-8984    BAGLANTI KUTUSU /BU
5975-15-219-6441    NORDIK C 35/14 BIAN
5975-14-461-1362    BATI/BAIE,EQUIPEMEN
5975-14-483-4127    BATI/BAIE,EQUIPEMEN
5975-15-143-4275    SUPPORTO LIVING P/U
5975-66-122-4914    ELBOW,INSIDE/OUTSID
5975-14-462-1460    BATI/BAIE,EQUIPEMEN
5975-15-221-3793    TASSELLO C/VITE D.8
5975-27-041-4511    BAGLANTI KUTUSU /BU
5975-27-037-5798    BAGLANTI KUTUSU /BU
5975-14-439-6447    CHASSIS/TIROIR,FONC
5975-14-416-2430    BATI/BAIE,EQUIPEMEN
5975-15-231-7894    SUPPORTO PT/M8 ZF
5975-27-034-4778    BAGLANTI KUTUSU /BU
5975-15-216-0325    COPRIFORO S/BLANC -
5975-25-129-9749    RAMME,TOPP-/BUNN
5975-14-439-6466    CHASSIS/TIROIR,FONC
5975-15-209-9023    PROLUNGA SVGA M/M D
5975-14-459-4223    BATI/BAIE,EQUIPEMEN
5975-27-055-7936    BUAT/KOFRA
5975-15-218-2137    BOX VKA 8/SID C-160
5975-14-461-3469    BATI/BAIE,EQUIPEMEN
5975-14-439-6470    CHASSIS/TIROIR,FONC
5975-14-460-6354    BATI/BAIE,EQUIPEMEN
5975-14-440-2653    CHASSIS/TIROIR,FONC
5975-14-460-0068    BATI/BAIE,EQUIPEMEN
5975-14-488-5862    ANNEAU/MANCHON
5975-99-891-7424    IDM TO V/UHF MOUNTI
5975-15-170-1686    PPI/RHI CHASSIS I
5975-14-459-4245    BATI/BAIE,EQUIPEMEN
5975-14-439-6457    CHASSIS/TIROIR,FONC
5975-27-034-4773    BAGLANTI KUTUSU /BU
5975-14-475-8581    STATION MANU/AUTO
5975-27-055-3615    BAGLANTI KUTUSU /BU
5975-15-176-7148    MINICANALE TMC 40/2
5975-17-122-6951    MEASUREMENT/CONTROL
5975-99-425-1688    ARM-RETAINING R/H
5975-15-167-5593    DEVIAZIONE A 90/DX
5975-15-211-8299    CANALA TMU-W 22/1X1
5975-14-461-3976    BATI/BAIE,EQUIPEMEN
5975-15-195-6015    FLD/AUX REGULATOR B
5975-15-231-8138    PASSACAVI 3/4
5975-27-037-1224    BAGLANTI KUTUSU /BU
5975-15-167-5588    DEVIAZIONE A 90/15
5975-15-220-6302    CASSETTA C/PARETI L
5975-27-054-5818    BAGLANTI KUTUSU /BU
5975-14-459-4244    BATI/BAIE,EQUIPEMEN
5975-14-439-6448    CHASSIS/TIROIR,FONC
5975-14-459-2986    BATI/BAIE,EQUIPEMEN
5975-14-460-6513    BATI/BAIE,EQUIPEMEN
5975-27-024-1767    BAGLANTI KUTUSU /BU
5975-27-055-9399    BAGLANTI KUTUSU /BU
5975-14-461-1360    BATI/BAIE,EQUIPEMEN
5975-27-034-0721    BAGLANTI KUTUSU /BU
5975-14-460-6314    BATI/BAIE,EQUIPEMEN
5975-17-112-4776    REK, AM/RM
5975-99-751-5018    FISHPLATE, VEHICLE/
5975-13-118-7371    A/C GROUNDING CABLE
5975-14-460-7025    BATI/BAIE,EQUIPEMEN
5975-14-460-7007    BATI/BAIE,EQUIPEMEN
5975-66-122-4911    ELBOW, INSIDE/OUTSI
5975-14-439-6472    CHASSIS/TIROIR,FONC
5975-66-122-4913    ELBOW,INSIDE/OUTSID
5975-15-231-8139    PASSACAVI 3/8 GAS
5975-99-788-1277    ADAPTOR,GROOVED W/S
5975-14-459-4233    BATI/BAIE,EQUIPEMEN
5975-27-059-3213    BAGLANTI KUTUSU /BU
5975-15-219-7204    SUPP.C/GRIFFE X SCA
5975-14-439-6471    CHASSIS/TIROIR,FONC
5975-27-059-4820    BAGLANTI KUTUSU /BU
5975-14-460-6313    BATI/BAIE,EQUIPEMEN
5975-15-210-3052    GHIERA PASSO GAS 3/
5975-14-460-6358    BATI/BAIE,EQUIPEMEN
5975-14-459-7985    BATI/BAIE,EQUIPEMEN
5975-14-439-6450    CHASSIS/TIROIR,FONC
5975-14-441-1459    BATI/BAIE,EQUIPEMEN
5975-14-462-1464    BATI/BAIE,EQUIPEMEN
5975-14-459-4235    BATI/BAIE,EQUIPEMEN
5975-15-148-9658    INPUT/OUTPUT BOX
5975-14-518-9443    BATI/BAIE,EQUIPEMEN
5975-15-139-6785    BASETTA MET3 4P/3SL
5975-14-440-2648    CHASSIS/TIROIR,FONC
5975-27-020-3818    BAGLANTI KUTUSU /BU
5975-27-037-5801    BAGLANTI KUTUSU /BU
5975-15-174-7336    INPUT/OUTPUT BOX
5975-14-461-3409    BATI/BAIE,EQUIPEMEN
5975-15-214-2799    TASSELLO C/VITE DA
5975-27-017-6996    BAGLANTI KUTUSU /BU
5975-14-460-6512    BATI/BAIE,EQUIPEMEN
5975-14-439-6461    CHASSIS/TIROIR,FONC
5975-27-055-3617    BAGLANTI KUTUSU /BU
5975-15-230-9662    PANNELLO 1 U. C/5 A
5975-14-439-6465    CHASSIS/TIROIR,FONC
5975-14-460-7030    BATI/BAIE,EQUIPEMEN
5975-14-460-6356    BATI/BAIE,EQUIPEMEN
5975-14-461-0172    BATI/BAIE,EQUIPEMEN
5975-14-460-7006    BATI/BAIE,EQUIPEMEN
5975-14-405-8723    BATI/BAIE,EQUIPEMEN
5975-15-212-4228    DISPOSITIVO MT/BM
5975-14-461-1029    BATI/BAIE,EQUIPEMEN
5975-66-122-4910    ELBOW, INSIDE/OUTSI
5975-15-186-0459    BUSSOLA SC/SC
5975-27-019-4760    BAGLANTI KUTUSU /BU
5975-14-460-3727    BATI/BAIE,EQUIPEMEN
5975-14-440-2650    CHASSIS/TIROIR,FONC
5975-15-230-8642    PANNELLO 32 POS.C/I
5975-99-787-3801    TOP CAP 1/4IN INDIC
5975-14-439-6452    CHASSIS/TIROIR,FONC
5975-27-039-1418    BAGLANTI KUTUSU /BU
5975-27-021-0838    BAGLANTI KUTUSU /BU
5975-15-216-8698    BUSSOLA SC/ST SINPL
5975-14-462-1459    BATI/BAIE,EQUIPEMEN
5975-66-122-4912    ELBOW,INSIDE/OUTSID
5975-15-139-6787    BASETTA MET3 2PO/1S
5975-14-436-5292    BATI/BAIE,EQUIPEMEN
5975-15-174-8921    CANALA/PEDANA PASSA
5975-27-058-5325    BAGLANTI KUTUSU /BU
5975-27-028-0771    BAGLANTI KUTUSU /BU
5975-14-439-6467    CHASSIS/TIROIR,FONC
5975-99-787-6837    ADAPTOR,GROOVED W/S
5975-01-307-4032    ENCLOSURE,FILTER EMI/RFI
5975-14-461-1363    BATI/BAIE,EQUIPEMEN
5975-15-209-5516    TEGOLINO 1/2X18W
5975-14-536-2068    DC/DC CONVERTER
5975-27-024-7458    BAGLANTI KUTUSU /BU
5975-27-059-5443    BAGLANTI KUTUSU /BU
5975-14-440-2654    CHASSIS/TIROIR,FONC
5975-14-451-7665    BATI/BAIE,EQUIPEMEN
5975-27-055-3614    BAGLANTI KUTUSU /BU
5975-14-460-6346    BATI/BAIE,EQUIPEMEN
5975-14-461-0170    BATI/BAIE,EQUIPEMEN
5975-27-040-9670    BAGLANTI KUTUSU /BU
5975-14-459-4240    BATI/BAIE,EQUIPEMEN
5975-14-409-5650    BATI/BAIE,EQUIPEMEN
5975-15-139-9627    RACCORDO TUBO/CASSE
5975-27-046-0350    BAGLANTI KUTUSU /BU
5975-14-042-9383    CHASSIS/TIROIR,FONC
5975-27-044-4092    BAGLANTI KUTUSU /BU
5975-14-459-4248    BATI/BAIE,EQUIPEMEN
5975-14-456-4151    BATI/BAIE,EQUIPEMEN
5975-14-457-0686    BATI/BAIE,EQUIPEMEN
5975-99-902-1649    ARM-RETAINING L/H
5975-14-439-6460    CHASSIS/TIROIR,FONC
5975-27-027-1256    BAGLANTI KUTUSU /BU
5975-14-527-2543    BATI/BAIE,EQUIPEMEN
5975-27-013-7464    BAGLANTI KUTUSU /BU
5975-15-212-5935    CAST. A BIN. C/LAMP
5975-15-231-8197    ANGOLO INTERNO/ESTE
5975-15-209-9025    PROLUNGA SVGA M/F D
5975-15-219-7194    ANGOLO INT/EST X MI
5975-27-042-6288    BAGLANTI KUTUSU /BU
5975-27-026-0558    BAGLANTI KUTUSU /BU
5975-14-439-6469    CHASSIS/TIROIR,FONC
5975-99-527-1644    RACK,RADIO/DATA TER
5975-15-237-5275    RACCORDO TUBO/GUAIN
5975-15-209-5514    TUBO PVC/RAC 16 TU-
5975-15-209-5515    TUBO PVC/RAC20 TU-G
5975-14-460-6307    BATI/BAIE,EQUIPEMEN
5975-14-439-6463    CHASSIS/TIROIR,FONC
5975-27-041-4512    BAGLANTI KUTUSU /BU
5975-99-700-9198    CARRIER/RISER,CABLE
5975-27-046-7919    BAGLANTI KUTUSU /BU
5975-15-217-3275    TASSELLO C/VITE DA
5975-15-211-8298    CANALA 40/2X17
5975-14-443-7212    CHASSIS/TIROIR,FONC
5975-27-036-1782    BAGLANTI KUTUSU /BU
5975-15-000-1622    MUFFOLA CONT I/E ST
5975-14-460-6345    BATI/BAIE,EQUIPEMEN
5975-14-460-6368    BATI/BAIE,EQUIPEMEN
5975-15-189-8861    CARICA/SCARICA BATT
5975-27-034-4774    BAGLANTI KUTUSU /BU
5975-15-167-5582    PLACCHE TICINO 503/
5975-15-189-8944    IDROBOX MAGIC/MATIX
5975-14-459-4247    BATI/BAIE,EQUIPEMEN
5975-14-409-5652    BATI/BAIE,EQUIPEMEN
5975-15-211-8129    QUADRO ELEKTRON EK/
5975-15-178-9803    UPS W/S BREAKER ASS
5975-99-787-6836    ADAPTOR,GROOVED W/S
5975-14-460-6359    BATI/BAIE,EQUIPEMEN
5975-17-108-2459    T-STRAP,NYLON,V/DRA
5975-14-460-6409    BATI/BAIE,EQUIPEMEN
5975-99-787-6834    ADAPTOR,GROOVED W/S
5975-27-032-6743    BAGLANTI KUTUSU /BU
5975-99-787-6838    ADAPTOR,GROOVED W/S
5975-14-380-0204    BATI/BAIE,EQUIPEMEN
5975-14-439-6454    CHASSIS/TIROIR,FONC
5975-27-034-0726    BAGLANTI KUTUSU /BU
5975-14-462-1454    BATI/BAIE,EQUIPEMEN
5975-14-439-6456    CHASSIS/TIROIR,FONC
5975-14-439-6449    CHASSIS/TIROIR,FONC
5975-15-237-5277    RACCORDO TUBO/GUAIN
5975-27-017-3061    BAGLANTI KUTUSU /BU
5975-25-143-2660    SKJOETEHODE M/HOLDE
5975-14-453-7684    VERROU 1/4 TOUR
5975-14-440-2651    CHASSIS/TIROIR,FONC
5975-27-051-7270    BAGLANTI KUTUSU /BU
5975-14-456-6611    BATI/BAIE,EQUIPEMEN
5975-27-039-1394    BAGLANTI KUTUSU /BU
5975-27-034-4772    BAGLANTI KUTUSU /BU
5975-14-461-0171    BATI/BAIE,EQUIPEMEN
5975-15-167-5658    PLACCA/SUPPORTO 3 P
5975-27-052-1169    BAGLANTI KUTUSU /BU
5975-27-050-5991    BAGLANTI KUTUSU /BU
5975-14-042-9494    BATI/BAIE,EQUIPEMEN
5975-14-439-6464    CHASSIS/TIROIR,FONC
5975-14-459-2052    BATI/BAIE,EQUIPEMEN
5975-14-439-6451    CHASSIS/TIROIR,FONC
5975-27-039-1407    BAGLANTI KUTUSU /BU
5975-14-460-6367    BATI/BAIE,EQUIPEMEN
5975-14-439-6455    CHASSIS/TIROIR,FONC
5975-14-439-6446    CHASSIS/TIROIR,FONC
5975-27-018-3703    BAGLANTI KUTUSU /BU
5975-14-459-4243    BATI/BAIE,EQUIPEMEN
5975-15-216-8696    BUSSOLA ST/ST MULTI
5975-27-042-5937    BAGLANTI KUTUSU /BU
5975-27-021-4228    BAGLANTI KUTUSU /BU
5975-14-460-7026    BATI/BAIE,EQUIPEMEN
5975-27-057-1556    BAGLANTI KUTUSU /BU
5975-14-457-0709    BATI/BAIE,EQUIPEMEN
5975-14-501-6598    COMMUTATION,220-R/2
5975-27-021-0839    BAGLANTI KUTUSU /BU
5975-25-106-3229    GYRO JUNCTIONBOX A/
5975-14-449-7602    VERROU 1/4 TOUR
5975-15-139-9628    RACCORTO TUBO/CASSE
5975-27-046-1888    BAGLANTI KUTUSU /BU
5975-27-021-4227    BAGLANTI KUTUSU /BU
5975-14-460-3728    BATI/BAIE,EQUIPEMEN
5975-27-018-0019    BAGLANTI KUTUSU /BU
5975-14-460-7028    BATI/BAIE,EQUIPEMEN
5975-14-461-0169    BATI/BAIE,EQUIPEMEN
5975-14-461-1373    BATI/BAIE,EQUIPEMEN
5975-27-019-4050    BAGLANTI KUTUSU /BU
5975-15-208-0207    PS MONTAGERIAL PS/E
5975-14-459-6401    BATI/BAIE,EQUIPEMEN
5975-14-520-8382    CABLE MASSE/TERRE
5975-27-021-0837    BAGLANTI KUTUSU /BU
5975-14-457-0702    BATI/BAIE,EQUIPEMEN
5975-14-439-6462    CHASSIS/TIROIR,FONC
5975-15-209-3877    VASCHETTE TIPO F/3
5975-14-454-6434    CHASSIS/TIROIR,FONC
5975-14-439-6453    CHASSIS/TIROIR,FONC
5975-15-208-0199    PS FOOT VE 4 PS/P
5975-00-483-1342    CONDUIT W/FITTINGS
5975-15-216-8697    BUSSOLA SC/SC DUPLE
5975-27-027-9981    BAGLANTI KUTUSU /BU
5975-27-018-0790    BAGLANTI KUTUSU /BU
5975-15-219-0742    KIT ATTREZZI VOCE/D
NSNNameStatus
5975-15-167-5583    PLACCHE TICINO 503/
5975-27-046-1852    BAGLANTI KUTUSU /BU
5975-27-040-8985    BAGLANTI KUTUSU /BU
5975-14-439-6458    CHASSIS/TIROIR,FONC
5975-15-186-6721    CURVA APRIBILE 1 1/
5975-27-044-7123    BAGLANTI KUTUSU /BU
5975-27-021-5077    BAGLANTI KUTUSU /BU
5975-15-167-5584    PLACCHE TICINO 503/
5975-99-788-1276    ADAPTOR,GROOVED W/S
5975-27-021-6435    BAGLANTI KUTUSU /BU
5975-27-055-6520    BAGLANTI KUTUSU /BU
5975-14-454-6435    CHASSIS/TIROIR,FONC
5975-15-237-5276    RACCORDO TUBO/GUAIN
5975-14-461-3473    BATI/BAIE,EQUIPEMEN
5975-14-460-7027    BATI/BAIE,EQUIPEMEN
5975-27-033-5906    BAGLANTI KUTUSU /BU
5975-14-440-2652    CHASSIS/TIROIR,FONC
5975-15-219-7324    LED 230/100V 1W EMI
5975-27-052-3734    BAGLANTI KUTUSU /BU
5975-27-051-5925    BAGLANTI KUTUSU /BU
5975-14-439-6468    CHASSIS/TIROIR,FONC
5975-27-046-1853    BAGLANTI KUTUSU /BU
5975-27-042-4285    BAGLANTI KUTUSU /BU
5975-14-447-0580    CHASSIS/TIROIR,FONC
5975-14-460-6308    BATI/BAIE,EQUIPEMEN
5975-27-026-0486    BAGLANTI KUTUSU /BU
5975-14-461-0168    BATI/BAIE,EQUIPEMEN
5975-27-050-9874    BAGLANTI KUTUSU /BU
5975-15-210-2636    RACCORDO TUBO/SCATO
5975-14-393-6822    CHASSIS/TIROIR,FONC
5975-14-439-6459    CHASSIS/TIROIR,FONC
5975-27-038-2364    BAGLANTI KUTUSU /BU
5975-27-019-4049    BAGLANTI KUTUSU /BU
5975-00-009-2724    MOUNTING BASE,ELECTRICAL EQUIPMENT
5975-00-065-4024    CLAMP,ELECT CONDUCT
5975-00-069-8779    CABINET,ELECTRICAL EQUIPMENT
5975-00-054-1626    CONDUIT,METAL,FLEXIBLE
5975-00-057-9415    BUSHING,ELECTRICAL CONDUIT
5975-01-657-4466    ADAPTER,ELECTRICAL CONDUIT
5975-01-642-0589    CONDUIT,NONMETALLIC,FLEXIBLE
5975-01-631-1487    PROTECTOR,ELECTRICAL CABLE
5975-01-589-6162    MOUNTING BASE,ELECTRICAL EQUIPMENT
5975-01-616-4605    CABINET,ELECTRICAL EQUIPMENT
5975-01-617-0807    CABINET,ELECTRICAL EQUIPMENT
5975-01-591-1693    MOUNTING BASE,TIE DOWN,ELECTRICAL
5975-14-566-4087    FERRULE,ELECTRICAL CONDUIT
5975-00-995-5260    BOX CONNECTOR,ELECTRICAL
5975-01-014-9935    STUFFING TUBE
5975-00-989-5046    STUFFING TUBE
5975-01-528-4881    GROUNDING KIT
5975-01-509-8123    CONDUIT ASSEMBLY,METAL,RIGID
5975-01-528-9269    PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT
5975-01-531-1131    CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT
5975-01-517-5237    CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT
5975-01-533-6581    BASE,ELECTRICAL EQUIPMENT RACK
5975-01-533-1544    CONDUIT,NONMETALLIC,FLEXIBLE
5975-01-523-8832    ADAPTER,ELECTRICAL CONDUIT
5975-01-536-1791    CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT
5975-01-540-8726    JUNCTION BOX
5975-01-543-9011    CLAMP,ELECTRICAL CONDUCTOR,STRAIN
5975-01-548-2314    STUFFING TUBE
5975-01-540-7591    RACEWAY,METALLIC
5975-01-556-6071    HANGER,CABLE
5975-01-507-6546    MOUNTING BASE,TIEDO
5975-01-526-1586    ADAPTER,ELECTRICAL CONDUIT
5975-01-564-6434    CONDUIT,NONMETALLIC,RIGID
5975-01-559-2876    STRAP,TIE DOWN,ELECTRICAL COMPONENTS
5975-01-565-7434    LEG,ELECTRICAL EQUIPMENT
5975-01-616-3232    CABINET,ELECTRICAL EQUIPMENT
5975-01-618-0392    CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT
5975-01-623-7915    PLATE,MOUNTING
5975-01-625-1470    SHELF,ELECTRICAL EQUIPMENT
5975-01-569-2288    CONDUIT,NONMETALLIC,FLEXIBLE
5975-01-571-7202    MOUNTING BASE,ELECTRICAL EQUIPMENT
5975-01-643-5765    CABLE INT PANEL
5975-01-632-2755    PLATE,WALL,ELECTRICAL
5975-01-643-4892    BASE,MOUNTING,ELECTRICAL FITTING
5975-01-645-2560    JUNCTION BOX
5975-01-646-5149    CABINET,ELECTRICAL EQUIPMENT
5975-01-643-2465    TRAY,MOUNTING,ELECTRONIC EQUIPMENT
5975-01-580-0466    CONDUIT,METAL,FLEXIBLE
5975-01-654-0306    INTERCONNECTING BOX
5975-01-655-5158    LINK,REINFORCING,CABLE
5975-01-658-8225    JUNCTION BOX
5975-01-661-5222    MOUNTING BASE,TIE DOWN,ELECTRICAL
5975-01-658-8186    PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT
5975-01-582-1857    SHELF,ELECTRICAL EQUIPMENT
5975-01-583-4743    RACEWAY ASSEMBLY,METALLIC
5975-01-586-3578    PLATE,WALL,ELECTRICAL
5975-01-586-9890    STUFFING TUBE
5975-01-667-3722    CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT
5975-01-588-3969    STUFFING TUBE
5975-01-590-0095    RAIL,GUIDE
5975-01-668-1942    PANEL,BLANK
5975-01-671-8380    SLEEVE,MARKER,CABLE
5975-01-584-6169    STRAP,TIE DOWN,ELECTRICAL COMPONENTS
5975-01-584-8617    CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT
5975-01-675-8535    PLATE,ELECTRICAL GROUNDING
5975-01-681-8436    CROSS,ELECTRICAL CONDUIT
5975-01-591-5875    CHRG MTR RSIST ASSY
5975-01-684-4730    STRAP,TIE DOWN,ELECTRICAL COMPONENTS
5975-01-593-6207    SHELF,ELECTRICAL EQUIPMENT
5975-01-694-2532    RACK,ELECTRICAL EQUIPMENT
5975-01-693-0497    CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT
5975-01-593-9612    MOUNTING BASE,ELECTRICAL EQUIPMENT
5975-01-595-5665    PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT
5975-12-173-1199    SLEEVE,MARKER,CABLE
5975-12-186-5640    STRAP,TIE DOWN,ELECTRICAL COMPONENTS
5975-12-349-0810    STRAP,TIE DOWN,ELECTRICAL COMPONENTS
5975-12-350-9200    MOUNTING BASE,ELECTRICAL EQUIPMENT
5975-12-371-2914    STRAP,TIE DOWN,ELECTRICAL COMPONENTS
5975-99-660-3347    RAIL,GUIDE
5975-01-604-8379    MOUNTING BASE,TIE DOWN,ELECTRICAL
5975-01-604-9316    CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT
5975-01-603-7726    TRAY,MOUNTING,ELECTRONIC EQUIPMENT
5975-01-605-3356    CABLE NIPPLE,ELECTRICAL
5975-01-605-1697    CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL
5975-01-611-9295    PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT
5975-01-612-5664    STRAP,TIE DOWN,ELECTRICAL COMPONENTS
5975-01-616-2132    PROTECTOR,ELECTRICAL CABLE
5975-01-616-3145    STUFFING TUBE
5975-01-619-4599    CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT
5975-01-694-2536    RACK,ELECTRICAL EQUIPMENT
5975-01-511-7425    PROTECTOR,ELECTRICAL CABLE
5975-01-523-2379    CONNECTION KIT,EXTENSION REEL MOUNTING
5975-01-512-7790    CONDUIT ASSEMBLY,METAL,FLEXIBLE
5975-01-518-2509    PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT
5975-01-532-0779    CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT
5975-01-519-8736    CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT
5975-01-533-7552    CONDUIT OUTLET
5975-01-533-3639    ELBOW,ELECTRICAL CONDUIT
5975-01-534-7921    PANEL,BLANK
5975-01-534-5876    ADAPTER,ELECTRICAL CONDUIT
5975-01-534-3366    COVER,JUNCTION BOX
5975-01-534-7862    CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL
5975-01-536-6888    REEL,STATIC GROUND
5975-01-539-4904    MOUNTING BASE,ELECTRICAL EQUIPMENT
5975-01-540-2982    RACEWAY ASSEMBLY,NONMETALLIC
5975-01-540-0805    RACEWAY,METALLIC
5975-01-546-4554    CATHODE ORIFICE AY
5975-01-550-6052    SLEEVE,MARKER,CABLE
5975-01-555-8212    CONDUIT OUTLET
5975-01-499-5905    CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT
5975-01-497-1501    ROD,GROUND
5975-01-499-9458    CONDUIT,METAL,RIGID
5975-01-553-6732    CONDUIT,METAL,RIGID
5975-01-500-8749    MOUNTING BASE,ELECTRICAL EQUIPMENT
5975-01-556-6015    BRACE,CROSSARM
5975-01-556-7943    HANGER,CABLE
5975-01-557-0995    CONDUIT,NONMETALLIC,FLEXIBLE
5975-01-557-0994    CONDUIT,NONMETALLIC,FLEXIBLE
5975-01-510-5756    RACK,ELECTRICAL EQUIPMENT
5975-01-557-4830    HANGER,CABLE
5975-01-568-1255    PANEL,BLANK
5975-01-558-4056    HOOK,UNDERGROUND CABLE RACK
5975-01-567-5889    CONDUIT,METAL,RIGID
5975-01-600-7943    PLATE,ELECTRICAL GROUNDING
5975-01-610-0058    CONDUIT ASSEMBLY,METAL,FLEXIBLE
5975-01-610-0199    MOUNTING BASE,ELECTRICAL EQUIPMENT
5975-01-616-0564    JUNCTION BOX
5975-01-562-2088    MOUNTING BASE,TIE DOWN,ELECTRICAL
5975-01-568-6756    PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT
5975-01-557-4819    JUNCTION BOX
5975-01-568-9477    PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT
5975-01-627-5639    RAIL,GUIDE
5975-01-629-4706    HANGER,WIRE STRAND
5975-01-643-0892    SPACER,CABLE
5975-01-572-9278    BUSHING,STRAIN RELIEF,CABLE
5975-01-572-8292    PLATE,ELECTRICAL GROUNDING
5975-01-573-7897    PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT
5975-01-575-3515    MOUNTING BASE,ELECTRICAL EQUIPMENT
5975-01-576-8281    RACK,ELECTRICAL EQUIPMENT
5975-01-577-7297    PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT
5975-01-646-5161    CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT
5975-01-653-0641    MOUNTING BASE,ELECTRICAL EQUIPMENT
5975-01-556-2383    CONDUIT OUTLET
5975-01-578-0175    CONDUIT,NONMETALLIC,FLEXIBLE
5975-01-580-7417    MOUNTING BASE,ELECTRICAL EQUIPMENT
5975-01-581-2459    CONDUIT OUTLET
5975-01-586-8616    INTERCONNECTING BOX
5975-01-659-8592    MOUNTING BASE,ELECTRICAL EQUIPMENT
5975-01-661-6197    SLEEVE,MARKER,CABLE
5975-01-661-9777    ADAPTER,STUFFING TUBE
5975-01-661-7580    COVER,SWITCH TERMINAL
5975-01-664-4534    PROTECTOR,ELECTRICAL CABLE
5975-01-588-3362    STUFFING TUBE
5975-01-666-3324    PLATE,WALL,ELECTRICAL
5975-01-667-3740    CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT
5975-01-667-8026    BASE,CHASSIS
5975-01-589-4253    ROD,GROUND
5975-01-668-6899    HANGER,CABLE
5975-01-576-0294    PANEL,BLANK
5975-01-675-8253    PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT
5975-01-670-2887    CLAMP,ELECTRICAL CONDUCTOR,STRAIN
5975-01-679-2466    MOUNTING BASE,ELECTRICAL EQUIPMENT
5975-01-582-6872    MOUNTING BASE,TIE DOWN,ELECTRICAL
5975-01-591-4820    PANEL,UPPER FRONT
5975-01-681-8435    CROSS,ELECTRICAL CONDUIT
5975-01-686-5328    SHELF,ELECTRICAL EQUIPMENT
5975-01-590-5241    CONDUIT,NONMETALLIC,FLEXIBLE
5975-01-686-9085    PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT
5975-01-591-5065    PANEL,UPPER FRONT
5975-01-689-9516    CHAMBER,CABLE TERMINAL
5975-01-682-8286    FERRULE,ELECTRICAL CONDUIT
5975-01-687-9054    PLATE,MOUNTING
5975-01-595-4949    CHAMBER,CABLE TERMINAL
5975-01-611-0109    CONDUIT,NONMETALLIC,RIGID
5975-12-173-1196    SLEEVE,MARKER,CABLE
5975-01-595-5309    MOUNTING BASE,TIE DOWN,ELECTRICAL
5975-01-596-6889    CONDUIT,METAL,RIGID
5975-01-597-1465    PLATE,ELECTRICAL GROUNDING
5975-01-596-7344    COVER,CONDUIT OUTLET
5975-01-694-2542    RACK,ELECTRICAL EQUIPMENT
5975-01-597-1386    HANGER,CABLE
5975-20-007-7893    CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT
5975-01-602-7830    PANEL,ELECTRICAL-ELECTRONIC EQUIPMENT
5975-99-665-7524    STRAP,TIE DOWN,ELECTRICAL COMPONENTS
5975-01-605-6311    PANEL,BLANK
5975-01-606-4617    BOX CONNECTOR,ELECTRICAL
5975-01-605-1693    CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL
5975-01-609-2539    CONDUIT,METAL,RIGID
5975-01-610-9152    CONDUIT ASSEMBLY,NONMETALLIC,ELECTRICAL
5975-01-611-5394    STRAP,TIE DOWN,ELECTRICAL COMPONENTS
5975-01-612-0627    BASE,CHASSIS
5975-01-622-9716    PANEL,BLANK
5975-01-621-7879    REDUCING WASHER,KNOCKOUT
5975-01-625-3926    ELBOW,ELECTRICAL CONDUIT
5975-01-628-4467    STUFFING TUBE
5975-00-008-4660    CHASSIS,ELECTRICAL-ELECTRONIC EQUIPMENT
5975-01-616-3210    CABINET,ELECTRICAL EQUIPMENT
5975-01-631-2223    TRAY,MOUNTING,ELECTRONIC EQUIPMENT
5975-01-617-2468    CABINET,ELECTRICAL EQUIPMENT
5975-01-616-4377    CABINET,ELECTRICAL EQUIPMENT
5975-01-591-4878    ARC CHUTE ASSY
5975-01-568-6280    DUCT ASSEMBLY,AIRCONDITIONING-HEATING,VEHICULAR
5975-00-280-9223    ELBOW,ELECTRICAL CONDUIT
5975-01-583-5994    LEG,ELECTRICAL EQUIPMENT
5975-01-513-4607    STRAP,TIE DOWN,ELECTRICAL COMPONENTS
5975-01-565-9704    STRAP,TIE DOWN,ELECTRICAL COMPONENTS
5975-01-556-9356    JUNCTION BOX ASSEMBLY
5975-00-245-1689    CONDUIT OUTLET
5975-00-245-1710    CONDUIT OUTLET
5975-00-245-1734    CONDUIT OUTLET
5975-00-245-1673    CONDUIT OUTLET
5975-00-284-9258    CONDUIT OUTLET
5975-00-280-3743    ENTRANCE CAP,ELECTRICAL
5975-00-282-2707    STRAP,TIE DOWN,ELECTRICAL COMPONENTS
5975-00-232-7641    CONDUIT OUTLET
5975-00-280-7772    BOX CONNECTOR,ELECTRICAL
5975-00-284-9256    CONDUIT OUTLET