5970-01-154-5351

3040-00-399-4138 3040003994138 003994138 SHOE,THRUST BEARING

5310-99-971-3100 5310999713100 999713100 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

3040-00-399-4137 3040003994137 003994137 is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. it is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. a pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. solid items have a bearing surface on one or both end(s) perpendicular to the axis. for items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see clamp, hub. see also bearing, sleeve; bushing, sleeve; spacer, sleeve; and coupling, shaft, rigid.

2815-99-829-5108 2815998295108 998295108 is a preformed metallic item with one or more inlet ports and two or more outlet ports. it is designed to collect and direct air (diesel application) and/or fuel-air mixture (gasoline application) to the cylinders of an internal combustion engine.