5970-01-141-0125

5310-00-167-0749 5310001670749 001670749 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

3110-12-167-0749 3110121670749 121670749 is a cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. for items with faces specially ground for duplex mounting see bearing, ball, duplex. excludes bearing, ball, airframe.

5925-15-167-0749 5925151670749 151670749 INTERRUTTORE AUTOMA

2990-01-167-0749 2990011670749 011670749 is a non-metallic device designed to filter air flow from the crankcase through the positive crankcase ventilation (pcv) valve into the air cleaner. excludes filter element, fluid.