5965-12-199-1499

Brustschaltkasten 04.433RNCC: 3 | RNVC: 2 | DAC: 32620104433RNCC: 5 | RNVC: 2 | DAC: 3 2 Oct 1986 5965-12-199-1499

5950-01-046-0776 5950010460776 010460776 is a transformer consisting of one or more primary winding(s) and one or more secondary winding(s). it may be designed for direct connection to an alternating current source for purposes of changing the secondary volts and amperes or designed to eliminate metallic interconnection between circuits in an overall one to one voltage ratio, with or without additional output windings, or items designed to automatically maintain a constant output voltage within specified limits under varying input or load conditions. also includes items having a provision for mechanically changing the turns ratio or inductive coupling in progressive increments by means of voltage taps, ratio adjuster, or devices oe similar design. for transformers having winding(s) common to both input and output circuits, see transformer (1), power, autotransformer. excludes transformer (1), pulse.

5310-14-458-9938 5310144589938 144589938 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5220-01-234-1115 5220012341115 012341115 is a gage ring used for setting snap gages, hole gages, comparators, and other type gages to required nominal outside dimensions.

5220-01-234-0765 5220012340765 012340765 is a gage ring used for setting snap gages, hole gages, comparators, and other type gages to required nominal outside dimensions.