5962-01-371-7803

Upgrade your Account Upgrade 3040-99-725-6531Linear Actuating Cylinder Assembly3040997256531 997256531 1888404
Digital Microcircuit 5962013717803 013717803 Upgrade your Account Upgrade 5962-01-371-7803Digital
Microcircuit5962013717803 013717803 1654/BEA 1888404 NumberManufacturerStatus1654/BEA 01WR9 - Department

8340-00-188-8404 8340001888404 001888404 is a long slender piece of wood or metal used in either vertical or horizontal position in support of a tent. it may be solid, jointed or telescopic and may be fitted with hardware.

4730-12-188-8404 4730121888404 121888404 is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. the tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. the boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. it may have side inlet(s). it is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. see also tee, tube; and tee, pipe to tube. excludes connector, multiple, fluid pressure line.

2530-15-188-8404 2530151888404 151888404 DISTRIBUTORE ANTIBL

5306-01-188-8404 5306011888404 011888404 is a high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. the head is designed to accommodate an external wrench or driver. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. the unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. a locking feature may be incorporated in the design of the head or threads. see bolt, machine and bolt, clevis.