5961-01-221-6320

Documents 6540-00-164-4940 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-59/fsc-5961/us 5961-01-221-6320
Transistor 5961012216320 012216320,362-0016 5961-01-221-6320 5961012216320 012216320 is an active

Germany (DE) 4. 6150-12-362-0016 Marketplace Restrictions Approved Sources Datasheet Management Open
RQST NE Updated Every Day 6150-12-362-0016 RQST Updated Every Day 6150-12-362-0016 RQST NE Related Documents
6150-12-362-0016 1+ Documents ( More... ) https//www.nsnlookup.com /fsg-59/fsc-5961/us 5961-01-221-6320

5310-01-500-4216 5310015004216 015004216 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5310-01-503-4939 5310015034939 015034939 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

Canyon Pl Ste 300 San RamonCA94583-4296 United States Points of Contact:Telephone:925-265-4040Fax:925-362-0016