5961-99-661-0197
Thyristor Semiconductor Device
5961996610197 996610197 1042940 1042940-001
A bistable semiconductor device comprising three or more junctions which is normally a nonconductor until the application of a signal to a gate terminal, at which time the device switches to the conductive state. Includes devices capable of being switched back to the nonconductive state upon application of a different signal to the same or another gate terminal. May or may not include mounting hardware and/or heatsink. For solid state devices which are responsive to visible or infrared radiant energy, see SEMICONDUCTOR DEVICE, PHOTO. View more Thyristor Semiconductor Device
Managed by United Kingdom
NSN Created on 25 Apr 1991
Data Last Changed
January 2023
January 2023
NATO Update Count
1
1
NATO Data Quality
Marketplace 5961-99-661-0197
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 5961-99-661-0197 5+ Documents (More...)
Documents 5315-15-104-2940 1+ Documents ( More... ) https//www.nsnlookup.com /fsg-59/fsc-5961/uk 5961-99-661-0197
Thyristor Semiconductor Device 5961996610197 2940 6850981042940 981042940 ADDITIVE,PLATING SO https
Thyristor Semiconductor Device 5961996610197 2940 6850981042940 981042940 ADDITIVE,PLATING SO https
5310-66-104-2940 5310661042940 661042940 is a washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces
3895-00-104-2940 3895001042940 001042940
6850-98-104-2940 6850981042940 981042940 ADDITIVE,PLATING SO
3040-17-104-2940 3040171042940 171042940 is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. it must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. the ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. it is not designed for use in aligning by fitting into corresponding holes of another item. for items used to support rotating members see axle(1), shouldered. for items not having any of the above conditions see pin, shoulder, headless. excludes shaft(1), straight; and axle(1), straight.
Restrictions 5961-99-661-0197
End Users 5961-99-661-0197
- Australia (ZA)
- United Kingdom (ZK)
Approved Sources 5961-99-661-0197
- Part Number
- Manufacturer
- Status
- 1042940
- Manufacturer
- K0605 - Linde Material Handling (Uk) Ltd (Active)
- Primary Buy
- Primary Buy
- 1042940-001
- K0605 - Linde Material Handling (Uk) Ltd (Active)
- Secondary Buy
- Secondary Buy
NATO Stock Numbers Related to 5961-99-661-0197
5961-14-415-0540 5961-14-380-7037 5961-14-368-6515 5961-14-400-5062 5961-33-126-3998 5961-12-158-5534 5961-14-370-6269 5961-14-324-6752 5961-14-305-0043 5961-99-785-2270 5961-12-316-3250 5961-14-381-0501 5961-12-177-2073 5961-14-435-1578 5961-99-037-3386 5961-14-359-9789 5961-14-419-6100 5961-41-118-6148