Premium Information is available for this item - Upgrade for $1 a day
5950-00-646-2163
Power Transformer
5950006462163 006462163 N285147-1 5769 36819
A transformer consisting of one or more primary winding(s) and one or more secondary winding(s). It may be designed for direct connection to an alternating current source for purposes of changing the secondary volts and amperes or designed to eliminate metallic interconnection between circuits in an overall one to one voltage ratio, with or without additional output windings, or items designed to automatically maintain a constant output voltage within specified limits under varying input or load conditions. Also includes items having a provision for mechanically changing the turns ratio or inductive coupling in progressive increments by means of voltage taps, ratio adjuster, or devices oe similar design. For transformers having winding(s) common to both input and output circuits, see TRANSFORMER (1), POWER, AUTOTRANSFORMER. Excludes TRANSFORMER (1), PULSE. View more Power Transformer
May 2023
18
Marketplace 5950-00-646-2163
Request a Quotation from participating marketplace vendors
Related Documents 5950-00-646-2163 5+ Documents (More...)
What is CAGE Code 36819?
Institute Inc located at 8480 St Laurent Blvd, Montreal, Qc, H2P 2M6, Canada.Who is CAGE Code 36819?
DAC: 5 1 Jan 1961 5950-00-646-2073 Power Transformer 2872RNCC: 5 | RNVC: 2 | DAC: 5 1 Jan 1961 5950-00-646-2163
entity known as Charalampous, Janet Dba Nutrition Consultants Div Nutrition Consultants located at 36819
3MWN4 refers to Charalampous, Janet Dba Nutrition Consultants Div Nutrition Consultants located at 36819
21-896-0323 Canada (ZC) Approved Sources 6505-21-896-0323 Part NumberManufacturerStatusDIN 00262609 36819
- Rosell Institute Inc (Active) Incomplete Reference RNCC 3 RNVC 1 DAC 4 0173 36819 - Rosell Institute
21-912-7362 Canada (ZC) Approved Sources 6505-21-912-7362 Part NumberManufacturerStatusDIN 00026700 36819
- Rosell Institute Inc (Active) Incomplete Reference RNCC 3 RNVC 1 DAC 4 POTASSIUM ROUGIER 36819 - Rosell
Restrictions 5950-00-646-2163
5950-00-646-2163 is a Power Transformer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. The precious metals content of this item is unknown.
End Users 5950-00-646-2163
- MOE Rule:
- BGX1
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- BTX1
- US Air Force (FXGX)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- FXTX
- US Navy (N9BN)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9ND
- Supplementary Collaborators:
- HD
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5950-00-646-2163
- Part Number
- Manufacturer
- Status
- N285147-1
- Manufacturer
- 06845 - Raytheon Company (Active)
- Primary Buy
- Primary Buy
- 5769
- 13483 - Precision Electronics, Inc (Active)
- Secondary Buy
- Secondary Buy
- 36819
- 73386 - Freed Transformer Co (Active)
- Secondary Buy
- Secondary Buy
Datasheet 5950-00-646-2163
- Characteristic
- Specifications
- FIIG
- Specifications
- A058B0
- Body Height [ADAU]
- 4.190 Inches Maximum
- Body Length [ADAQ]
- 5.750 Inches Nominal
- Body Width [ADAT]
- 4.250 Inches Nominal
- Center To Center Distance Between Mounting Facilities Parallel To Length [ABKQ]
- 4.938 Inches Nominal Single Mounting Facility Single Center Group
- Center To Center Distance Between Mounting Facilities Parallel To Width [ABKR]
- 3.438 Inches Nominal Single Mounting Facility Single Center Group
- Frequency Rating [ACZB]
- 50.0 Hertz Minimum Single Component And 60.0 Hertz Maximum Single Component
- Mounting Facility Quantity [AKPV]
- 4 Single Group
- Mounting Method [AXGY]
- Threaded Stud Single Group
- Inclosure Type [AKNA]
- Open
- Input-Output Phase Relationship [ACZC]
- Single Phase To Single Phase Single Component
- Reliability Indicator [AARG]
- Not Established
- Winding Operating Current [CRBZ]
- 10.0 Amperes Ac Maximum Single Component Single Secondary
- Winding Function And Quantity [BPLC]
- 1 Primary Single Component And 1 Secondary Single Component
- Winding Operating Voltage [CWJS]
- 18.00 Ac Volts Nominal Single Component Single Secondary
- Winding Operating Voltage [CWJS]
- 180.00 Ac Volts Nominal Single Component Single Primary
- Winding Shielding Method [ACZX]
- Internal Shield Grounded To Inclosure Single Component
- Terminal Type And Quantity [TTQY]
- 5 Wire Lead
DLA Procurement Analysis 5950-00-646-2163
Management Data 5950-00-646-2163
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5950-00-646-2163
Freight Information 5950-00-646-2163
5950-00-646-2163 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 063420. A Sub NMFC of Z. It has a NMFC Description of TRANSFORMERS,NOI,OR TRANSFORMER PAR. 5950-00-646-2163 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 35355 which rates the freight between FCL and LCL. 5950-00-646-2163 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 595 for ocean manifesting and military sealift. 5950-00-646-2163 is not classified as a special type of cargo when transported by water. 5950-00-646-2163 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5950-00-646-2163
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- MIL-P-130, Laminated and Creped Wrapping Paper
- A-A-1051, Paperboard Cushioning
- --
- ASTM-D5118, Type CF, Class Domestic, Corrugated Fiberboard Box
- No special marking
- MIL-P-130, Laminated and Creped Wrapping Paper
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Procurement History 5950-00-646-2163 1 Records
Contracting Technical Data File (CTDF) 5950-00-646-2163 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: