5950-15-077-4414

6350-27-014-0093 6350270140093 270140093 is a device designed to convert energy into audible signals by means of a diaphragm or specially designed horn element. sound may be produced by liquid, electro-mechanical device or pressure means.

5365-27-019-0093 5365270190093 270190093 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

2610-27-000-0093 2610270000093 270000093 is a mechanical device made of rubber, chemicals, fabric and steel or other materials, which, when mounted on a vehicular wheel, provides the traction and contains the fluid that sustains the load. tube type tires are a form to inclose an inner tube containing air under pressure. tubeless tires incorporate carcass materials and construction to provide fluid retention equal to that of a conventional tire and tube.

5306-27-009-0093 5306270090093 270090093 is an externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. see also screw, cap, hexagon head and screw, machine.

8405-27-046-0093 8405270460093 270460093 is a hat having a full brim which may be straight or turned-up. it may have a chin strap.