5950-15-077-4360
Trasformatore
5950150774360 150774360 27IT0123
Managed by Italy
NSN Created on 31 Dec 1975
Data Last Changed
January 2023
January 2023
NATO Update Count
1
1
NATO Data Quality
Marketplace 5950-15-077-4360
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 5950-15-077-4360 5+ Documents (More...)
5365-27-036-0123 5365270360123 270360123 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.
5365-27-057-0123 5365270570123 270570123 SHIM
3040-27-037-0123 3040270370123 270370123 is an item of various cross-sectional shapes which may be of solid or hollow construction. it is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. it is one of the following: (1) a one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) a one-piece item with both ends processed for terminations, excluding threaded end(s); (3) a two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) a three-piece construction type item consisting of a body and two end attachments. excludes internal combustion engine type piston connecting rods; drag link, steering; link, anchor, brake shoe; tie rod, steering; and turnbuckle. for cylindrical shaped externally threaded items without end attachments, see rod, threaded end and stud (as modified).
2590-27-048-0123 2590270480123 270480123 is a rigid item designed to suspend, support, retain and/or position vehicular component and/or attachment items. do not use if a more specific item name exists.
2510-27-029-0123 2510270290123 270290123 is an item designed to connect a hatch to a vehicular hull, turret, and the like to permit a swinging action during the opening and closing operation.
Restrictions 5950-15-077-4360
End Users 5950-15-077-4360
- Italy (ZR)
Approved Sources 5950-15-077-4360
- Part Number
- Manufacturer
- Status
- 27IT0123
- Manufacturer
- A1508 - Rheinmetall Italia Spa (Active)
- Primary Buy
- Primary Buy
NATO Stock Numbers Related to 5950-15-077-4360
2510-15-209-3009 2520-99-446-6108 6220-15-204-1528 9999-37-515-0085 5310-15-139-2426 9915-15-219-4601 1730-25-105-4112 1220-14-266-0252 4030-15-175-3668 6685-14-380-3542 1560-99-601-1385 1680-99-600-3219 1005-13-103-5661 2540-15-138-4766 4920-14-441-3681 5340-14-436-9248 2910-12-148-8383 5820-15-138-1601