5950-14-455-7142

Documents ( More... ) https//www.nsnlookup.com /cage Mors Technologies (CAGE Code F6512) Jun 1985 5950-14-455-7142

1305-14-482-1934 1305144821934 144821934 is an item consisting of a quantity of propellant and a means of activation inclosed in a container. it may contain an integral cutting punch. it is designed to be inserted into or attached to one or more devices to provide the energy required to operate a device not requiring a time delay in their operating sequence. it is used in devices, such as initiators, thrusters, cutters, and the like. for cartridges with a time delay see cartridge, delay.

1560-99-482-1934 1560994821934 994821934 is an item attached to the aircraft structure, flight controls, and the like to permit a rotating, pivoting motion between two or more parts. includes provisions for a pin or pins, bushings, bearings, and the like in which pivoting motion occurs. see also hinge (1), door, aircraft.

5999-00-482-1934 5999004821934 004821934

5365-01-482-1934 5365014821934 014821934 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.