5950-14-238-8143
Radio Frequency Transformer
5950142388143 142388143 1397-2 090207
An item having either a single tapped winding (autotransformer type), or two or more windings designed to furnish inductive reactance and/or transfer electrical energy in circuits by means of a magnetic field. It is so designed that its entire intended range of operations is above 20 Kilohertz (Kilocycles). The minimum value may extend into the audio frequency range (below 20 Kilohertz). It may include integral capacitors, coils, resistors, and adjustable tuning cores. For items having only two active terminals see COIL, RADIO FREQUENCY. Includes types having windings which may be moved with respect to each other. Excludes TRANSFORMER, DISCRIMINATOR. View more Radio Frequency Transformer
Managed by France
NSN Created on 1 Jan 1967
Data Last Changed
January 2023
January 2023
NATO Update Count
1
1
NATO Data Quality
Marketplace 5950-14-238-8143
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 5950-14-238-8143 5+ Documents (More...)
CAGE 5578G Kock - Sport S.R.O. in Brno - Slatina, Brno-Slatina, Czech Republic
5340-99-116-2228 5340991162228 991162228 CLAMP,LOOP
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-1397 2
-1397 2-1397 2-1397 2-1397 CONTINUITY TEST (1) Remove SWING CW/CCW controller (para 7-32). (2) Set
-1397 2-1397 2-1397 2-1397 CONTINUITY TEST (1) Remove SWING CW/CCW controller (para 7-32). (2) Set
3040-00-256-1966 3040002561966 002561966 is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. it must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. the ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. it is not designed for use in aligning by fitting into corresponding holes of another item. for items used to support rotating members see axle(1), shouldered. for items not having any of the above conditions see pin, shoulder, headless. excludes shaft(1), straight; and axle(1), straight.
$1 a day Upgrade your Account Upgrade 5855-01-073-1782Infrared Illuminator5855010731782 010731782 1397-2
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-1397 2
-1397 2-1397 2-1397 2-1397 CONTINUITY TEST (1) Remove SWING CW/CCW controller (para 7-32). (2) Set
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-1397 2
-1397 2-1397 2-1397 2-1397 CONTINUITY TEST (1) Remove SWING CW/CCW controller (para 7-32). (2) Set
Restrictions 5950-14-238-8143
End Users 5950-14-238-8143
- France (ZF)
Approved Sources 5950-14-238-8143
- Part Number
- Manufacturer
- Status
- 1397-2
- Manufacturer
- F6105 - Ateliers De Montages Electriques (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 090207
- F6105 - Ateliers De Montages Electriques (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
NATO Stock Numbers Related to 5950-14-238-8143
5950-99-530-2274 5950-14-381-3132 5950-15-116-8363 5950-15-059-3038 5950-14-266-0199 5950-99-107-5613 5950-14-373-4707 5950-99-103-8045 5950-21-873-6350 5950-15-059-3036 5950-14-367-4094 5950-14-042-0848 5950-99-949-5775 5950-14-257-7780 5950-14-356-3748 5950-14-310-0473 5950-14-353-1889 5950-99-913-7096