5950-14-209-5248

5310-00-637-3252 5310006373252 006373252 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

1560-00-006-8047 1560000068047 000068047 PANEL ASSEMBLY,FAIRING

6110-99-437-9021 6110994379021 994379021 REGULATOR,VOLTAGE

5310-14-210-5811 5310142105811 142105811 is a washer of nonresilient material usually having two parallel bearing surfaces. the outside and/or inside edges have one or more protuberances. the ends and/or edges may be prebent at any angle or the protuberances may be prebent at any angle to the bearing surfaces. the keys or lugs may be fitted into keyways in adjacent material or they may be bent over after application to hold or lock one or more items in place. excludes thrust type washer.

1680-00-966-9669 1680009669669 009669669 PARTS KIT,MOTOR