5950-12-166-7513

5995-01-199-0873 5995011990873 011990873 is a definite length of cable, radio frequency having one or both ends processed and/or terminated in fittings which provide for connection to other items. includes multiple cable assemblies in a common jacket or shield. excludes items having branches or forks and lead, test. see also cable assembly, radio frequency, branched.

6515-12-199-0873 6515121990873 121990873 DILATATOR, ORIFICIU

5998-99-199-0873 5998991990873 991990873 is a grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. each component of the assemblage must be capable of functioning in accordance with its own item name. consists of a single printed circuit board or terminal board upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. it may also include printed electronic components. the item is generally part of a subassembly and cannot be assigned a more definite item name. for items having a complete individual electrical/electronic function, use applicable item name such as amplifier (as modified); power supply; or the like. for items not having a complete individual electrical/electronic function, see applicable subassembly name, such as amplifier subassembly; power supply subassembly; or the like. for an assembly of electrical/electronic components mounted on other than a single printed wiring board, see electronic components assembly. excludes printed circuit boar

3020-01-033-0138 3020010330138 010330138 GEAR ASSEMBLY,ALTITUDE

5365-01-042-3328 5365010423328 010423328 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.