5950-21-802-3157

HMIC : | PMIC : | EDC: | ADPEC : 5950-21-101-6401. https//www.nsnlookup.com /fsg-59/fsc-5950/ca 5950-21-802-3157
Power Autotransformer Transformer 218023157 Documents 5950-21-802-3157 1+ Documents (More... )
ca 5950-21-101-6401 59502110164012110164015950-21-101-64015950211016401211016401 Restrictions 5950-21-802-3157

your Account Upgrade 6685-12-392-9745Humidity-Temperature Recorder6685123929745 123929745 0572 6560 174H
https//www.nsnlookup.com /fsg-59/fsc-5950/ca 5950-21-802-3157 Power Autotransformer Transformer 218023157
Upgrade your Account Upgrade 5950-21-802-3157Power Autotransformer Transformer5950218023157 218023157

Address:1201 N Watson Rd 174H ArlingtonTX76006-6190 United States Points of Contact:Telephone:3237882516
Organizations to reference the physical entity known as Sagasse Media Group Llc located at 1201 N Watson Rd 174H
9LBF4 refers to Sagasse Media Group Llc located at 1201 N Watson Rd 174H, Arlington TX 76006-6190, United

5306-00-141-4518 5306001414518 001414518 BOLT,CLOSE TOLERANCE

5306-00-141-4517 5306001414517 001414517 is an externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. for items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. for items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.