5945-14-421-9206

5945-99-748-7383 5945997487383 997487383 is a relay switch which is actuated by the effect of internal heat generated by the current in its energizing circuit. for items actuated by ambient, rather than internal temperature changes, see switch, thermostatic.

6625-99-757-7048 6625997577048 997577048 RESISTOR,POWER LOAD

5998-01-642-0131 5998016420131 016420131 is a printed wiring board having only printed electronic components, such as capacitors, resistors, and the like. for items having a complete individual electrical/electronic function, use applicable item name, such as amplifier (as modified); power supply; or the like. for items not having a complete individual electrical/electronic function, see applicable "subassembly" name, such as amplifier subassembly; power supply subassembly; or the like. for items having separately manufactured components (other than plug-in connecting facilities) and not having a more specific item name, see circuit card assembly.

5310-99-556-6220 5310995566220 995566220 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

4720-00-980-3650 4720009803650 009803650 is a flexible, tubular item of light wall construction. it must have single or multiple layers of nonmetallic material, but may contain metal wire reinforcement, foil type liner, and/or woven or braided cover. it is designed to convey under low pressure gaseous material, such as air and fumes, and light weight solid materials, such as dust, powders, and fibers. for items with couplings, see hose assembly, air duct. for items of sleeve section design rated for high pressure use, see sleeve, seal, coupling. excludes hose, nonmetallic.