Premium Information is available for this item - Upgrade for $1 a day
5940-01-011-6829
Radio Frequency Grounding Contact Strip
5940010116829 010116829 97-370-A 95A 971018-1C
A semirigid metallic item of electrically conductive material designed for the specific purpose of grounding and/or bonding radio frequency equipment. It is normally attached to one item to give spring action to form a ground and/or bond with another item. Excludes TERMINAL STRIP, GROUNDING; CONTACT, ELECTRICAL; and STRIP, ELECTRICAL GROUNDING. View more Radio Frequency Grounding Contact Strip
Managed by United States
NSN Created on 26 Oct 1975
Data Last Changed
August 2023
August 2023
NATO Update Count
5
5
NATO Data Quality
Marketplace 5940-01-011-6829
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
97-370-A CONTACT STRIP,RADIO FREQUENCY GROUNDING RQST NS
971018-1C CONTACT STRIP,RADIO FREQUENCY GROUNDING RQST NS
FedMall
Updated Every 15 Minutes
Updated Every 15 Minutes 5940-01-011-6829 BUY NE FedMall
Updated Every Day 5940-01-011-6829 RQST NE
Updated Every Day 5940-01-011-6829 RQST
Updated Every Day 5940-01-011-6829 RQST NE
Related Documents 5940-01-011-6829 5+ Documents (More...)
296-3548 Radio Frequency Grounding Contact Strip 187M60RNCC: 3 | RNVC: 2 | DAC: A 19 Mar 1989 5940-01-011-6829
5310-14-283-9037 5310142839037 142839037 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
5940-00-050-0202 5940000500202 000500202 is a semirigid metallic item of electrically conductive material designed for the specific purpose of grounding and/or bonding radio frequency equipment. it is normally attached to one item to give spring action to form a ground and/or bond with another item. excludes terminal strip, grounding; contact, electrical; and strip, electrical grounding.
JavaScript in your web browser . 1020-15-143-0088Coperchio Per Monta1020151430088 151430088 1127-97-370
Republic of Korea (ZH) Italy (ZR) Approved Sources 1020-15-143-0088 Part NumberManufacturerStatus1127-97-370
Republic of Korea (ZH) Italy (ZR) Approved Sources 1020-15-143-0088 Part NumberManufacturerStatus1127-97-370
224-3317 Radio Frequency Grounding Contact Strip 97-510ARNCC: 3 | RNVC: 2 | DAC: 4 5 Sep 1972 5940-01-011-6829
Radio Frequency Grounding Contact Strip 97-370-ARNCC: 3 | RNVC: 2 | DAC: 5 26 Oct 1975 5940-01-
Radio Frequency Grounding Contact Strip 97-370-ARNCC: 3 | RNVC: 2 | DAC: 5 26 Oct 1975 5940-01-
Restrictions 5940-01-011-6829
5940-01-011-6829 is a Radio Frequency Grounding Contact Strip that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5940-01-011-6829
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5940-01-011-6829
- US Army (A918)
- Effective Date:
- 1 Dec 2004
- Former MOE Rule:
- A917
- Supplementary Receivers:
- CL
- US Air Force (FXGG)
- Effective Date:
- 1 Aug 2004
- Former MOE Rule:
- FXCX
- US Navy (N9BG)
- Effective Date:
- 1 Aug 2004
- Supplementary Collaborators:
- KE
Approved Sources 5940-01-011-6829
- Part Number
- Manufacturer
- Status
- 97-370-A
- Manufacturer
- 30817 - Laird Technologies, Inc. (Active)
- Primary Buy
- Primary Buy
- 95A
- 52814 - Tech-Etch, Inc. (Active)
- Primary Buy
- Primary Buy
- 971018-1C
- 82577 - Raytheon Company (Active)
- Secondary Buy
- Secondary Buy
Datasheet 5940-01-011-6829
- Characteristic
- Specifications
- FIIG
- Specifications
- T174-B
- Material Document And Classification [MDCL]
- Qq-C-533 Fed Spec Single Material Response
- Material [MATT]
- Copper Alloy 170 Or Copper Alloy 172
- Overall Height [ABKW]
- 0.360 Inches Nominal
- Overall Length [ABHP]
- 15.985 Inches Minimum And 16.015 Inches Maximum
- Unit Type [APQB]
- Channel
Weapon Systems (WSDC) 5940-01-011-6829
DLA Procurement Analysis 5940-01-011-6829
Management Data 5940-01-011-6829
Army
- Materiel Category and Inventory Manager:
- Q
- Electronics Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5940-01-011-6829
5940-37-514-1804 5940-37-514-1796 5940-99-635-6537 5940-21-897-3526 5940-12-158-3639 5940-14-520-9777 5940-17-032-7199 5940-33-106-8224 5940-37-512-6911 5940-37-514-1809 5940-12-149-7736 5940-01-418-4807 5940-14-353-1946 5940-17-117-5933 5940-99-398-0788 5940-00-169-8811 5940-00-020-2773 5940-00-018-1510
Freight Information 5940-01-011-6829
5940-01-011-6829 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062140. A Sub NMFC of X. It has a NMFC Description of GROUND CLAMPS IN BOXES. 5940-01-011-6829 is rated as class 85 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34780 which rates the freight between FCL and LCL. 5940-01-011-6829 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5940-01-011-6829 is not classified as a special type of cargo when transported by water. 5940-01-011-6829 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5940-01-011-6829
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5940-01-011-6829 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: