Premium Information is available for this item - Upgrade for $1 a day
5940-00-403-1204
Terminal Board
5940004031204 004031204 E621369
An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (as modified); CONNECTOR (as modified). Excludes TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; and CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. For items having printed electrical conductor paths, see PRINTED WIRING BOARD. View more Terminal Board
May 2023
2
Marketplace 5940-00-403-1204
Request a Quotation from participating marketplace vendors
Related Documents 5940-00-403-1204 1+ Documents (More...)
/fsg-59/fsc-5940/us
RQST NE Updated Every Day 5940-00-403-1204 RQST Updated Every Day 5940-00-403-1204 RQST NE Related Documents
5940-00-403-1204 1+ Documents ( More... ) https//www.nsnlookup.com /fsg-59/fsc-5940/us 5940-00-403-1204
Restrictions 5940-00-403-1204
5940-00-403-1204 is a Terminal Board that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5940-00-403-1204
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5940-00-403-1204
- National Security Agency (DGX1)
- Effective Date:
- 1 Aug 2004
- Former MOE Rule:
- DCX1
- Supplementary Receivers:
- CX
Approved Sources 5940-00-403-1204
- Part Number
- Manufacturer
- Status
- E621369
- Manufacturer
- 08783 - Raytheon Co (Active)
- Primary Buy
- Primary Buy
Datasheet 5940-00-403-1204
- Characteristic
- Specifications
- FIIG
- Specifications
- A011B0
- Distance From Bottom Edge Of Terminal Board To Center Of Mounting Hole [ABDW]
- 0.380 Inches
- Distance From Left Edge Of Terminal Board To Center Of First Mounting Facility [ABDX]
- 0.190 Inches
- Board Construction [ABCX]
- Solid Construction
- Board Overall Length [ABGN]
- 8.880 Inches
- Board Overall Width [ABGP]
- 2.000 Inches
- Board Thickness [ABGT]
- 0.125 Inches
- Body Style [AAQL]
- Strip Type
- Center To Center Distance Between Mounting Facilities Parallel To Length [ABDU]
- 4.250 Inches
- Center To Center Distance Between Mounting Facilities Parallel To Width [ABDV]
- 1.250 Inches
- Center To Center Distance Between Terminals [ABCT]
- 0.375 Inches
- Distance Between Terminal Row Centers [ABCU]
- 1.250 Inches
- Feedthru Connection End Type [CQCW]
- 434 Both Ends Single Combination
- Feedthru Terminal Quantity [CRZR]
- 40 Single Combination
- Material [MATT]
- Glass Fiber Board And Plastic Epoxy Board
- Mounting Hole Diameter [AAMA]
- 0.152 Inches
- Mounting Facility Type And Quantity [AXHR]
- 6 Unthreaded Hole
- Material Document And Classification [MDCL]
- Mil-P-18177,Type Gee Mil Spec Single Material Response Board
- Special Markings [MARK]
- 1,2,9,10,19,20,29,30,39,40
- Surface Treatment Document And Classification [STDC]
- Mil-T-10727,Type 1 Mil Spec Single Treatment Response Terminals
- Surface Treatment [SFTT]
- Tin Terminals
- Terminal Design [CWLN]
- Vertical Feedthru
- Terminal Pattern Arrangement [CWLG]
- Multi-Row
- Terminal Row Quantity [ABCS]
- 2
DLA Procurement Analysis 5940-00-403-1204
Management Data 5940-00-403-1204
Similar Supply Items to 5940-00-403-1204
Freight Information 5940-00-403-1204
5940-00-403-1204 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 063160. A Sub NMFC of Z. It has a NMFC Description of SWITCH BOXES/ELEC ENCLOSURES. 5940-00-403-1204 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 35205 which rates the freight between FCL and LCL. 5940-00-403-1204 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 738 for ocean manifesting and military sealift. 5940-00-403-1204 is not classified as a special type of cargo when transported by water. 5940-00-403-1204 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5940-00-403-1204 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: