5940-99-914-0405

enable JavaScript in your web browser . 4710-14-306-0496Metal Tube Assembly4710143060496 143060496 A10-77-535
-0496 is a Metal Tube Assembly Approved Sources 4710-14-306-0496 Part NumberManufacturerStatusA10-77-535
-00-0 F0300 - Dassault Aviation (Active) Primary Buy RNCC 3 RNVC 2 DAC 2 A10-77-535-00-0 F2312 - Ste

8435-14-528-9272 8435145289272 145289272 is footwear designed to be worn by females past the age of physical maturity.

5950-00-528-9272 5950005289272 005289272 is a transformer consisting of one or more primary winding(s) and one or more secondary winding(s). it may be designed for direct connection to an alternating current source for purposes of changing the secondary volts and amperes or designed to eliminate metallic interconnection between circuits in an overall one to one voltage ratio, with or without additional output windings, or items designed to automatically maintain a constant output voltage within specified limits under varying input or load conditions. also includes items having a provision for mechanically changing the turns ratio or inductive coupling in progressive increments by means of voltage taps, ratio adjuster, or devices oe similar design. for transformers having winding(s) common to both input and output circuits, see transformer (1), power, autotransformer. excludes transformer (1), pulse.

1560-01-528-9272 1560015289272 015289272 is a device of various shapes to be permanently attached to the structure of an aircraft. it is designed to permanently mount and/or support an integral member, or group of members of the airframe in a proper position and bear the stress imposed by the components being supported. it may have mounting provisions, such as slots, holes, and/or attachments to facilitate installation. excludes items which are primarily designed for dampening shock and/or vibration. excludes bracket, angle; bracket, double angle; bracket, shelf; bracket, mounting; bracket (1), structural component, aircraft; and radius block.

3040-99-528-9272 3040995289272 995289272 is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. it is not designed for use in aligning by fitting into corresponding holes of another item. it may be drilled for lubricating holes. for items having an integral gear(s) or worm(s), see gearshaft (as modified). for items designed to support rotating members see axle(1), straight. for items not having the above conditions see pin, straight, headless. for items having machined ends which constitute steps see shaft(1), shouldered; axle(1), shouldered; and bolt, fluid passage.