Premium Information is available for this item - Upgrade for $1 a day
5935-01-535-7075
Electrical Receptacle Connector
5935015357075 015357075 MIL-DTL-38999 MS27468T25F4S MS27468T25F4SN
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR. View more Electrical Receptacle Connector
July 2023
4
Marketplace 5935-01-535-7075
Request a Quotation from participating marketplace vendors
Related Documents 5935-01-535-7075 5+ Documents (More...)
MS27468T25F4S CONNECTOR,RECEPTACLE,ELECTRICAL 3 EA NS Request Quotation Subscribe to View Vendor Details
MS27468T25F4S CONNECTOR,RECEPTACLE,ELECTRICAL 1 EA NS Request Quotation Subscribe to View Vendor Details
Electrical Receptacle Connector 015357075 5935-01-535-7075 5935015357075 015357075 is an electrical
CONNECTOR CONNECTOR,RECEPTACLE CONNECTOR, https https//www.nsnlookup.com CONNECTOR MIL-DTL-38999
MIL-DTL-38999 CONNECTOR,RECEPTACLE,ELECTRICAL 6 EA NS Request Quotation MS27468T21B11P CONNECTOR
CONNECTOR,RECEPTACLE CONNECTOR, https https//www.nsnlookup.com CONNECTOR MIL-DTL-38999 CONNECTOR
CONNECTOR,RECEPTACLE CONNECTOR, https https//www.nsnlookup.com CONNECTOR MIL-DTL-38999 CONNECTOR
MIL-DTL-38999 CONNECTOR BODY,MODULAR RECEPTACLE,ELECTRICAL 22 EA NS Request Quotation FedMall
CONNECTOR BODY,PLUG,ELECTRICAL 22 EA NS Request Quotation Updated Every Day 5935-01-504 MIL-DTL-38999
Restrictions 5935-01-535-7075
5935-01-535-7075 is a Electrical Receptacle Connector that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item contains gold.
Import and Export 5935-01-535-7075
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5935-01-535-7075
- US Army (A918)
- Effective Date:
- 1 Jun 2006
- Former MOE Rule:
- A196
- Supplementary Receivers:
- AZ
Approved Sources 5935-01-535-7075
- Part Number
- Manufacturer
- Status
- MS27468T25F4S
- Manufacturer
- 96906 - Military Standards (Active)
- Definitive Standard
- Definitive Standard
- MIL-DTL-38999
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MS27468T25F4SN
- 96906 - Military Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5935-01-535-7075
- Characteristic
- Specifications
- FIIG
- Specifications
- A039B0
- Distance From Mounting Shoulder To Front Face [AFQK]
- 0.910 Inches Minimum And 0.920 Inches Maximum
- End Item Identification [AGAV]
- Nsn 2350-01-506-0132; Armored Reconnaissance-Airborne Assault Vehicle
- Bushing Accommodation Hole Shape [CXCJ]
- Round W/Flat
- Connector Locking Method [AFRV]
- Bayonet Pin
- Contact Material [CQTZ]
- Copper Alloy Single Mating End All Contact Groupings
- Contact Position Arrangement Style [AFQX]
- 25-4 Single Mating End
- Contact Removability [AFQZ]
- Removable Single Mating End All Contact Groupings
- Contact Surface Treatment [CQYH]
- Gold Single Mating End All Contact Groupings
- Environmental Protection [ADZC]
- Moisture Proof And Salt Water Resistant And Vibration Proof And Corrosion Resistant And Dust Resistant And Fuel Resistant And Fungus Resistant And Humidity Resistant And Oil Resistant And Shock Resistant And Thermal Shock Resistant And Vibration Resistant
- Features Provided [CBBL]
- Scoopproof Design
- Body Style [AAQL]
- Straight Shape, External Coupling
- Mating End Quantity [AFQW]
- 1
- Mounting Facility Thickness [AFQQ]
- 0.062 Inches Minimum And 0.125 Inches Maximum
- Nominal Thread Length [AKMG]
- 0.219 Inches
- Nominal Thread Size [CQJX]
- 1.438 Inches And 1.750 Inches
- Nondefinitive Spec/Std Data [ZZZT]
- 96906 Ms27468t25f4sn Reference Number
- Operating Temp Rating [AWTN]
- -65.0 Deg Celsius Minimum And 200.0 Deg Celsius Maximum
- Included Contact Quantity [CXCG]
- 48 Single Mating End 2Nd Contact Grouping
- Included Contact Quantity [CXCG]
- 8 Single Mating End 1St Contact Grouping
- Included Contact Type [CXCL]
- Round Socket Single Mating End All Contact Groupings
- Insert Material [CQZG]
- Plastic Epoxy Single Mating End
- Insert Position In Deg [AFRP]
- 95.0 And 240.0 And 288.0 And 355.0
- Polarization Method [AFRN]
- Keyway Or Multiple Keyway
- Precious Material And Location [PMLC]
- Contact Surfaces Gold
- Precious Material And Weight [PMWT]
- 0.056 Gold Grains, Troy
- Shell Material [CSPT]
- Aluminum Alloy
- Shell Surface Treatment Document And Classification [CTBC]
- Mil-Dtl-38999, Class 3 Or 4, Grade B Mil Spec Single Treatment Response
- Shell Surface Treatment [CSWM]
- Nickel
- Shell Type [AFRT]
- Solid
- Overall Diameter [ADAV]
- 2.296 Inches Minimum And 2.328 Inches Maximum
- Overall Length [ABHP]
- 1.248 Inches Maximum
- Thread Series Designator [THSD]
- Unef And Uns
- Thread Quantity Per Inch [CMLP]
- 18 And 18
- Threaded Device Type [AFQR]
- Back Shell And Mounting Bushing
- Specification/Standard Data [ZZZK]
- 96906-Ms27468 Government Standard
- Terminal Location [CQTM]
- Back Single Mating End All Contact Groupings
- Terminal Type [CSCF]
- Crimp Single Mating End All Contact Groupings
- Test Data Document [TEST]
- 81349 Mil-Dtl-38999 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
- Thread Class [AAJD]
- 2A And 2A
- Thread Direction [AAJF]
- Right-Hand And Right-Hand
Weapon Systems (WSDC) 5935-01-535-7075
DLA Procurement Analysis 5935-01-535-7075
Management Data 5935-01-535-7075
Army
- Materiel Category and Inventory Manager:
- Q
- Electronics Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5935-01-535-7075
Freight Information 5935-01-535-7075
5935-01-535-7075 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 061680. A Sub NMFC of Z. It has a NMFC Description of ELEC WIRING PLUGS ETC. 5935-01-535-7075 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34570 which rates the freight between FCL and LCL. 5935-01-535-7075 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 658 for ocean manifesting and military sealift. 5935-01-535-7075 is not classified as a special type of cargo when transported by water. 5935-01-535-7075 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5935-01-535-7075
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 2.3" H x 2.3" W x 2.3" L
- --
- --
- --
- Any Suitable Process
- 2.3" H x 2.3" W x 2.3" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- --
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Procurement History 5935-01-535-7075 1 Records
Contracting Technical Data File (CTDF) 5935-01-535-7075 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: