Premium Information is available for this item - Upgrade for $1 a day
5935-01-529-3189
Electrical Receptacle Connector
5935015293189 015293189 3065T22P37 70000N-18-31P10-636-19 3065T22
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR. View more Electrical Receptacle Connector
June 2023
4
Marketplace 5935-01-529-3189
Request a Quotation from participating marketplace vendors
Related Documents 5935-01-529-3189 4+ Documents (More...)
BUY NE FedMall Updated Every Day 5935-01-529-3189 RQST NE Updated Every Day 5935-01-529-3189 RQST
Updated Every Day 5935-01-529-3189 RQST NE Related Documents 5935-01-529-3189 4+ Documents ( More...
Electrical Receptacle Connector 015293189 Upgrade 5935-01-529-3189Electrical Receptacle Connector5935015293189
015293189 3065T22P37 70000N-18-31P10 /fsg-59/fsc-5935/us 5935-01-529-3189 Electrical Receptacle Connector
-529-3189Electrical Receptacle Connector5935015293189 015293189 3065T22P37 70000N-18-31P10-636-19 3065T22
Electrical Receptacle Connector 015293189 -529-3189Electrical Receptacle Connector5935015293189
Electrical Receptacle Connector 015293189 -529-3189Electrical Receptacle Connector5935015293189
015293189 3065T22P37 70000N-18-31P10-636-19 3065T22 Electrical Receptacle Connector 015288111 01-528
Restrictions 5935-01-529-3189
5935-01-529-3189 is a Electrical Receptacle Connector that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item contains gold.
Import and Export 5935-01-529-3189
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5935-01-529-3189
- US Army (A918)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- A196
- Supplementary Receivers:
- CT
- US Navy (N9BN)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GG
Approved Sources 5935-01-529-3189
- Part Number
- Manufacturer
- Status
- 3065T22P37
- Manufacturer
- 99207 - General Electric Company (Active)
- Source Control
- Source Control
- 70000N-18-31P10-636-19
- 34222 - Hi Rel Connectors, Inc. (Active)
- Primary Buy
- Primary Buy
- 3065T22
- 99207 - General Electric Company (Active)
- Informational Drawing
- Informational Drawing
Datasheet 5935-01-529-3189
- Characteristic
- Specifications
- FIIG
- Specifications
- A039B0
- Center To Center Distance Between Mounting Facilities Parallel To Height [AEBW]
- 0.964 Inches Minimum And 0.974 Inches Maximum
- Connector Locking Method [AFRV]
- Externally Threaded Shell
- Contact Position Arrangement Style [AFQX]
- 22-37 Single Mating End
- Contact Removability [AFQZ]
- Nonremovable Single Mating End Single Contact Grouping
- Contact Surface Treatment Document And Classification [CRBJ]
- Mil-G-45204 Mil Std 1St Treatment Response And Qq-S-571 Assn Std 2Nd Treatment Response Single Mating End Single Contact Grouping
- Contact Surface Treatment [CQYH]
- Gold And Tin Single Mating End Single Contact Grouping
- Distance Between Centerlines Of Mounting Facilities Parallel To Body Width [AEHA]
- 0.964 Inches Minimum And 0.974 Inches Maximum
- Environmental Protection [ADZC]
- Hermetic
- Body Style [AAQL]
- Straight Shape, Flange Mount External Coupling
- Mating End Quantity [AFQW]
- 1
- Nominal Thread Size [CQJX]
- 1.062 Inches
- End Item Identification [AGAV]
- Nsn: 2840-01-114-2211; Engine, Aircraft, Turbo-Shaft; Ws: Engine, T700-Ge-701 (Ah-64).
- Precious Material [PRMT]
- Gold
- Precious Material And Location [PMLC]
- Contacts. Gold
- Supplementary Features [SUPP]
- Mounting Method - Flange And Unthreaded Hole
- Included Contact Quantity [CXCG]
- 33 Single Mating End Single Contact Grouping
- Included Contact Type [CXCL]
- Round Pin Single Mating End Single Contact Grouping
- Insert Position In Deg [AFRP]
- 0.0
- Polarization Method [AFRN]
- Keyway Or Multiple Keyway
- Shell Surface Treatment Document And Classification [CTBC]
- Qq-N-290 Class 2 Assn Std Single Treatment Response
- Shell Surface Treatment [CSWM]
- Nickel
- Overall Height [ABKW]
- 1.245 Inches Minimum And 1.255 Inches Maximum
- Overall Length [ABHP]
- 1.022 Inches Nominal
- Overall Width [ABMK]
- 1.245 Inches Minimum And 1.255 Inches Maximum
- Thread Series Designator [THSD]
- Unef
- Threaded Device Type [AFQR]
- Back Shell
- Unthreaded Mounting Hole Diameter [AEBV]
- 0.136 Inches Nominal
- Specification/Standard Data [ZZZK]
- 99207 - 3065T22+37 Manufacturers Source Control
- Terminal Location [CQTM]
- Back Single Mating End Single Contact Grouping
- Terminal Type [CSCF]
- Solder Stud Single Mating End Single Contact Grouping
- Thread Class [AAJD]
- 2A
- Thread Direction [AAJF]
- Right-Hand
Weapon Systems (WSDC) 5935-01-529-3189
DLA Procurement Analysis 5935-01-529-3189
- Last Stock Position:
- 9 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5935-01-529-3189
Army
- Materiel Category and Inventory Manager:
- Q
- Electronics Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5935-01-529-3189
Freight Information 5935-01-529-3189
5935-01-529-3189 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 061680. A Sub NMFC of Z. It has a NMFC Description of ELEC WIRING PLUGS ETC. 5935-01-529-3189 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34570 which rates the freight between FCL and LCL. 5935-01-529-3189 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 658 for ocean manifesting and military sealift. 5935-01-529-3189 is not classified as a special type of cargo when transported by water. 5935-01-529-3189 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5935-01-529-3189
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 1.3" H x 1.3" W x 1.0" L
- --
- --
- --
- Any Suitable Process
- 1.3" H x 1.3" W x 1.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- MIL-DTL-17667, Neutral Wrapping Paper
- No Requirement
- Not Applicable
- --
- No special marking
- MIL-DTL-17667, Neutral Wrapping Paper
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5935-01-529-3189 1 Records
Contracting Technical Data File (CTDF) 5935-01-529-3189 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Y
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: