Premium Information is available for this item - Upgrade for $1 a day
5935-01-507-1742
Electrical Receptacle Connector
5935015071742 015071742 MIL-DTL-28840/12 M28840/12AF1F6 MIL-C-28840/12
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR. View more Electrical Receptacle Connector
November 2023
2
Marketplace 5935-01-507-1742
Request a Quotation from participating marketplace vendors
Related Documents 5935-01-507-1742 5+ Documents (More...)
15 Minutes 5935-01-507-1742 BUY NE FedMall Updated Every Day 5935-01-507-1742 RQST NE Updated Every Day
5935-01-507-1742 RQST Updated Every Day 5935-01-507-1742 RQST NE Related Documents 5935-01-507-1742
An electrical fitting with electrical contacts constructed to be affixed M28840/12AB1P6 MIL-C-28840/12
An electrical fitting with electrical contacts constructed to be affixed M28840/12AC1F6 MIL-C-28840/12
M28840/12AC1P5 MIL-C-28840/12 An electrical fitting with electrical contacts constructed to be affixed
Electrical Receptacle Connector 015071742 M28840/12AF1F6 MIL-C-28840/12 An electrical fitting with
M28840/12AD1S5 MIL-C-28840/12 An electrical fitting with electrical contacts constructed to be affixed
MIL-C-28840/12 CONNECTOR,RECEPTACLE,ELECTRICAL 6 EA NS Request Quotation Subscribe to View Vendor Details
MIL-C-28840/12 CONNECTOR,RECEPTACLE,ELECTRICAL 6 EA NS Request Quotation Updated Every Day 5935-01-321
An electrical fitting with electrical contacts constructed to be affixed MIL-C-28840/12 CONNECTOR
Restrictions 5935-01-507-1742
5935-01-507-1742 is a Electrical Receptacle Connector that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item contains gold.
Import and Export 5935-01-507-1742
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5935-01-507-1742
- US Navy (N9BN)
- Effective Date:
- 1 Aug 2006
- Former MOE Rule:
- N9ND
- Supplementary Collaborators:
- GTHXHD
Approved Sources 5935-01-507-1742
- Part Number
- Manufacturer
- Status
- M28840/12AF1F6
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-DTL-28840/12
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MIL-C-28840/12
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5935-01-507-1742
- Characteristic
- Specifications
- FIIG
- Specifications
- A039B0
- Distance From Mounting Shoulder To Front Face [AFQK]
- 0.878 Inches Minimum And 0.898 Inches Maximum
- Center To Center Distance Between Mounting Facilities Parallel To Height [AEBW]
- 1.281 Inches Nominal
- Color [HUES]
- Olive Drab
- Connector Locking Method [AFRV]
- Externally Threaded Shell
- Contact Position Arrangement Style [AFQX]
- 23-64 Single Mating End
- Contact Removability [AFQZ]
- Removable Single Mating End Single Contact Grouping
- Distance Between Centerlines Of Mounting Facilities Parallel To Body Width [AEHA]
- 1.281 Inches Nominal
- Body Style [AAQL]
- Straight Shape, External Coupling
- Mating End Quantity [AFQW]
- 1
- Nominal Thread Size [CQJX]
- 1.500 Inches
- Included Contact Quantity [CXCG]
- 64 Single Mating End Single Contact Grouping
- Included Contact Type [CXCL]
- Round Pin Single Mating End Single Contact Grouping
- Insert Position In Deg [AFRP]
- 0.0 And 88.0 And 163.0 And 207.0 And 281.0
- Polarization Method [AFRN]
- Keyway Or Multiple Keyway
- Precious Material And Location [PMLC]
- Contact Surfaces Gold
- Precious Material [PRMT]
- Gold
- Shell Material [CSPT]
- Aluminum
- Shell Surface Treatment [CSWM]
- Cadmium
- Shell Type [AFRT]
- Split
- Overall Height [ABKW]
- 1.698 Inches Minimum And 1.738 Inches Maximum
- Overall Length [ABHP]
- 1.625 Inches Maximum
- Overall Width [ABMK]
- 1.698 Inches Minimum And 1.738 Inches Maximum
- Thread Series Designator [THSD]
- Double Stub
- Thread Quantity Per Inch [CMLP]
- 10
- Threaded Device Type [AFQR]
- Coupling Facility
- Specification/Standard Data [ZZZK]
- 81349-Mil-C-28840/12 Government Specification
- Terminal Location [CQTM]
- Back Single Mating End Single Contact Grouping
- Terminal Type [CSCF]
- Crimp Single Mating End Single Contact Grouping
- Test Data Document [TEST]
- 81349-Mil-C-28840 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
- Thread Class [AAJD]
- 2A
- Thread Direction [AAJF]
- Right-Hand
Weapon Systems (WSDC) 5935-01-507-1742
DLA Procurement Analysis 5935-01-507-1742
- Last Stock Position:
- 3 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5935-01-507-1742
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5935-01-507-1742
Freight Information 5935-01-507-1742
5935-01-507-1742 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 061680. A Sub NMFC of Z. It has a NMFC Description of ELEC WIRING PLUGS ETC. 5935-01-507-1742 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34570 which rates the freight between FCL and LCL. 5935-01-507-1742 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 658 for ocean manifesting and military sealift. 5935-01-507-1742 is not classified as a special type of cargo when transported by water. 5935-01-507-1742 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5935-01-507-1742
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 1.6" H x 1.7" W x 1.7" L
- --
- --
- --
- Any Suitable Process
- 1.6" H x 1.7" W x 1.7" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- No Requirement
- Not Applicable
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5935-01-507-1742 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: