Premium Information is available for this item - Upgrade for $1 a day
5935-01-444-5358
Electrical Receptacle Connector
5935014445358 014445358 MIL-DTL-28840/12 M28840/12AC1B1 MIL-C-28840/12
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR. View more Electrical Receptacle Connector
May 2023
3
Marketplace 5935-01-444-5358
Request a Quotation from participating marketplace vendors
Related Documents 5935-01-444-5358 5+ Documents (More...)
5935-01-444-5358 BUY NE FedMall Updated Every Day 5935-01-444-5358 RQST NE Updated Every Day 5935-01
-444-5358 RQST Updated Every Day 5935-01-444-5358 RQST NE Related Documents 5935-01-444-5358 5+ Documents
An electrical fitting MIL-C-28840/12 CONNECTOR,RECEPTACLE,ELECTRICAL 6 EA NS Request Quotation Updated
An electrical fitting with electrical contacts constructed to be affixed MIL-C-28840/12 CONNECTOR
An electrical fitting MIL-C-28840/12 CONNECTOR,RECEPTACLE,ELECTRICAL 6 EA NS Request Quotation Updated
An electrical fitting with electrical contacts constructed to be affixed MIL-C-28840/12 CONNECTOR
An electrical fitting MIL-C-28840/12 CONNECTOR,RECEPTACLE,ELECTRICAL 6 EA NS Request Quotation Updated
An electrical fitting with electrical contacts constructed to be affixed MIL-C-28840/12 CONNECTOR
An electrical fitting MIL-C-28840/12 CONNECTOR,RECEPTACLE,ELECTRICAL 6 EA NS Request Quotation Updated
An electrical fitting with electrical contacts constructed to be affixed MIL-C-28840/12 CONNECTOR
Restrictions 5935-01-444-5358
5935-01-444-5358 is a Electrical Receptacle Connector that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
Import and Export 5935-01-444-5358
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5935-01-444-5358
- US Navy (N9BN)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- N9ND
- Supplementary Collaborators:
- HD
Approved Sources 5935-01-444-5358
- Part Number
- Manufacturer
- Status
- M28840/12AC1B1
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-DTL-28840/12
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MIL-C-28840/12
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5935-01-444-5358
- Characteristic
- Specifications
- FIIG
- Specifications
- A039B0
- Distance From Mounting Shoulder To Front Face [AFQK]
- 0.878 Inches Minimum And 0.898 Inches Maximum
- Center To Center Distance Between Mounting Facilities Parallel To Height [AEBW]
- 0.968 Inches Nominal
- Contact Position Arrangement Style [AFQX]
- 15-21 Single Mating End
- Distance Between Centerlines Of Mounting Facilities Parallel To Body Width [AEHA]
- 0.968 Inches Nominal
- Body Style [AAQL]
- Straight Shape, External Coupling W/Backshell
- Mating End Quantity [AFQW]
- 1
- Included Contact Quantity [CXCG]
- 21 Single Mating End Single Contact Grouping
- Overall Height [ABKW]
- 1.238 Inches Minimum And 1.278 Inches Maximum
- Overall Length [ABHP]
- 1.625 Inches Nominal
- Overall Width [ABMK]
- 1.238 Inches Minimum And 1.278 Inches Maximum
- Specification/Standard Data [ZZZK]
- 81349-Mil-C-28840/12 Government Specification
- Terminal Location [CQTM]
- Back Single Mating End Single Contact Grouping
- Terminal Type [CSCF]
- Crimp Single Mating End Single Contact Grouping
- Test Data Document [TEST]
- 81349-Mil-C-28840/12 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
DLA Procurement Analysis 5935-01-444-5358
Management Data 5935-01-444-5358
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5935-01-444-5358
Freight Information 5935-01-444-5358
5935-01-444-5358 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 061680. A Sub NMFC of Z. It has a NMFC Description of ELEC WIRING PLUGS ETC. 5935-01-444-5358 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34570 which rates the freight between FCL and LCL. 5935-01-444-5358 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 658 for ocean manifesting and military sealift. 5935-01-444-5358 is not classified as a special type of cargo when transported by water. 5935-01-444-5358 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5935-01-444-5358
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 1.6" H x 1.3" W x 1.3" L
- --
- --
- --
- Any Suitable Process
- 1.6" H x 1.3" W x 1.3" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- MIL-DTL-17667, Neutral Wrapping Paper
- No Requirement
- Not Applicable
- --
- No special marking
- MIL-DTL-17667, Neutral Wrapping Paper
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5935-01-444-5358 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: