Premium Information is available for this item - Upgrade for $1 a day
5935-01-330-7640
Electrical Receptacle Connector Body
5935013307640 013307640 MIL-DTL-28748/10 M28748/10H0AL1Z MIL-C-28748/10
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR. View more Electrical Receptacle Connector
May 2023
7
Marketplace 5935-01-330-7640
Request a Quotation from participating marketplace vendors
Related Documents 5935-01-330-7640 5+ Documents (More...)
CONNECTOR BODY,RECEPTACLE,ELECTRICAL RQST NS Request Quotation Updated Every Day 5935-01-330-7640
RQST NE Updated Every Day 5935-01-330-7640 RQST Updated Every Day 5935-01-330-7640 RQST NE Related Documents
M28748/10G0BL1Z M28748/10G0BL MIL-C-28748/10 An electrical fitting with electrical contacts constructed
M28748/10G0GG1A M28748/09G0GG1A MIL-C-28748/10 An electrical fitting with electrical contacts constructed
An electrical fitting with electrical contacts constructed to be affixed M28748/10CDAL MIL-C-28748/10
An electrical fitting with electrical contacts constructed to be affixed M28748/10CDAL MIL-C-28748/10
An electrical fitting with electrical contacts constructed to be affixed M28748/10CDAL MIL-C-28748/10
An electrical fitting with electrical contacts constructed to be affixed M28748/10CDAL MIL-C-28748/10
An electrical fitting with electrical contacts constructed to be affixed M28748/10CDAL MIL-C-28748/10
An electrical fitting with electrical contacts constructed to be affixed M28748/10CDAL MIL-C-28748/10
Restrictions 5935-01-330-7640
5935-01-330-7640 is a Electrical Receptacle Connector Body that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
Import and Export 5935-01-330-7640
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5935-01-330-7640
- US Navy (N9BN)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- N9ND
- Supplementary Collaborators:
- HDJB
Approved Sources 5935-01-330-7640
- Part Number
- Manufacturer
- Status
- M28748/10H0AL1Z
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-DTL-28748/10
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MIL-C-28748/10
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5935-01-330-7640
- Characteristic
- Specifications
- FIIG
- Specifications
- A039B0
- Center To Center Distance Between Mounting Facilities Parallel To Height [AEBW]
- 1.845 Inches Minimum And 1.855 Inches Maximum
- Connector Locking Method [AFRV]
- Post Jacksocket
- Contact Position Arrangement Style [AFQX]
- 212 Single Mating End
- Distance Between Centerlines Of Mounting Facilities Parallel To Body Width [AEHA]
- 2.495 Inches Minimum And 2.505 Inches Maximum
- Environmental Protection [ADZC]
- Humidity Resistant And Shock Resistant And Thermal Shock Resistant And Vibration Resistant
- Body Style [AAQL]
- Straight Shape, Rectangular
- Mating End Quantity [AFQW]
- 1
- Nominal Thread Size [CQJX]
- 0.250 Inches
- Operating Temp Rating [AWTN]
- -55.0 Deg Celsius Minimum And 125.0 Deg Celsius Maximum
- Insert Material Document And Classification [CTKL]
- Mil-M-14,Ty Sdg-F Mil Spec Single Material Response Or Mil-P-19833,Ty Gdi-30F Mil Spec Single Material Response Single Mating End
- Insert Material [CQZG]
- Plastic Diallyl Phthalate Glass Filled Single Mating End
- Polarization Method [AFRN]
- Polarization Boss
- Overall Height [ABKW]
- 2.380 Inches Minimum And 2.400 Inches Maximum
- Overall Length [ABHP]
- 1.173 Inches Nominal
- Overall Width [ABMK]
- 2.865 Inches Minimum And 2.885 Inches Maximum
- Thread Series Designator [THSD]
- Unf
- Threaded Device Type [AFQR]
- Coupling Facility
- Unthreaded Mounting Hole Diameter [AEBV]
- 0.143 Inches Minimum And 0.155 Inches Maximum
- Specification/Standard Data [ZZZK]
- 81349-Mil-C-28748/10 Government Specification
- Test Data Document [TEST]
- 81349-Mil-C-28748 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
- Thread Direction [AAJF]
- Right-Hand
- Thread Class [AAJD]
- 2B
- Thread Quantity Per Inch [CMLP]
- 28
Weapon Systems (WSDC) 5935-01-330-7640
DLA Procurement Analysis 5935-01-330-7640
Management Data 5935-01-330-7640
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5935-01-330-7640
Freight Information 5935-01-330-7640
5935-01-330-7640 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 061680. A Sub NMFC of Z. It has a NMFC Description of ELEC WIRING PLUGS ETC. 5935-01-330-7640 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34570 which rates the freight between FCL and LCL. 5935-01-330-7640 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 658 for ocean manifesting and military sealift. 5935-01-330-7640 is not classified as a special type of cargo when transported by water. 5935-01-330-7640 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5935-01-330-7640
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 5935-01-330-7640 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: