Premium Information is available for this item - Upgrade for $1 a day
5935-01-320-7807
Electrical Receptacle Connector
5935013207807 013207807 1990-0057-0000 8446875
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR. View more Electrical Receptacle Connector
November 2023
6
Marketplace 5935-01-320-7807
Request a Quotation from participating marketplace vendors
Related Documents 5935-01-320-7807 5+ Documents (More...)
Restrictions 5935-01-320-7807
5935-01-320-7807 is a Electrical Receptacle Connector that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item contains Silver.
Import and Export 5935-01-320-7807
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5935-01-320-7807
- US Air Force (FXGX)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- FXTX
Approved Sources 5935-01-320-7807
- Part Number
- Manufacturer
- Status
- 1990-0057-0000
- Manufacturer
- 81861 - Cooper Interconnect, Inc. (Replaced)
- Original Design
- Original Design
- 8446875
- 36024 - Libby Power Systems Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 1990-0057-0000
- 99447 - Cooper Interconnect, Inc. (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5935-01-320-7807
- Characteristic
- Specifications
- FIIG
- Specifications
- A039B0
- Distance From Mounting Shoulder To Rear Face [AFQL]
- 0.265 Inches Minimum And 0.285 Inches Maximum
- Contact Material [CQTZ]
- Copper Alloy Single Mating End Single Contact Grouping
- Contact Position Arrangement Style [AFQX]
- 3 Single Mating End
- Contact Removability [AFQZ]
- Nonremovable Single Mating End Single Contact Grouping
- Contact Maximum Dc Voltage Rating In Volts [AFRE]
- 28.0 Single Mating End Single Contact Grouping
- Contact Surface Treatment [CQYH]
- Silver Single Mating End Single Contact Grouping
- Distance Between Mounting Facility Centers [AEJN]
- 3.740 Inches Minimum And 3.760 Inches Maximum
- Body Style [AAQL]
- Straight Shape, Power Type
- Mating End Quantity [AFQW]
- 1
- Nominal Thread Size [CQJX]
- 0.375 Inches And 0.190 Inches
- Included Contact Quantity [CXCG]
- 3 Single Mating End Single Contact Grouping
- Included Contact Type [CXCL]
- Round Pin Single Mating End Single Contact Grouping
- Polarization Method [AFRN]
- Mating End
- Precious Material And Location [PMLC]
- Contact Surfaces Silver
- Precious Material And Weight [PMWT]
- 0.015 Silver Grains, Troy
- Precious Material [PRMT]
- Silver
- Shell Material [CSPT]
- Aluminum Alloy
- Shell Surface Treatment [CSWM]
- Anodize
- Shell Type [AFRT]
- Solid
- Overall Height [ABKW]
- 3.820 Inches Minimum And 3.940 Inches Maximum
- Overall Length [ABHP]
- 4.440 Inches Minimum And 4.560 Inches Maximum
- Overall Width [ABMK]
- 1.880 Inches Minimum And 2.000 Inches Maximum
- Thread Series Designator [THSD]
- Unc And Unf
- Threaded Device Type [AFQR]
- Mounting Stud
- Unthreaded Mounting Hole Diameter [AEBV]
- 0.195 Inches Minimum And 0.215 Inches Maximum
- Terminal Location [CQTM]
- Back Single Mating End Single Contact Grouping
- Terminal Type [CSCF]
- Pin Single Mating End Single Contact Grouping
- Thread Direction [AAJF]
- Right-Hand And Right-Hand
- Thread Class [AAJD]
- 2A And 2A
- Thread Quantity Per Inch [CMLP]
- 16 And 32
Weapon Systems (WSDC) 5935-01-320-7807
DLA Procurement Analysis 5935-01-320-7807
- Last Stock Position:
- 12 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5935-01-320-7807
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5935-01-320-7807
Freight Information 5935-01-320-7807
5935-01-320-7807 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 061680. A Sub NMFC of Z. It has a NMFC Description of ELEC WIRING PLUGS ETC. 5935-01-320-7807 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34570 which rates the freight between FCL and LCL. 5935-01-320-7807 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 658 for ocean manifesting and military sealift. 5935-01-320-7807 is not classified as a special type of cargo when transported by water. 5935-01-320-7807 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5935-01-320-7807
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Procurement History 5935-01-320-7807 1 Records
Contracting Technical Data File (CTDF) 5935-01-320-7807 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: