Premium Information is available for this item - Upgrade for $1 a day
5935-01-260-9645
Electrical Receptacle Connector
5935012609645 012609645 SAE-AS50151 MS3452W14-3S M83723/21R1403N MILC83723-21 MIL-C-5015 MS3102R14-3SC
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR. View more Electrical Receptacle Connector
November 2023
17
Marketplace 5935-01-260-9645
Request a Quotation from participating marketplace vendors
Related Documents 5935-01-260-9645 5+ Documents (More...)
MS3102A18-1SW MS3452W18-1SW 810VI0833 MILC83723-21 MS3102A18-1SW MS3452W18-1SW 810VI0833 MILC83723-21
-7SC MS3452W36-7S MIL-C-5015 An electrical fitting MS3102A18-1SW MS3452W18-1SW 810VI0833 MILC83723-21
-7SC MS3452W36-7S MIL-C-5015 An electrical fitting MS3102A18-1SW MS3452W18-1SW 810VI0833 MILC83723-21
-1SW 810VI0833 MILC83723-21 MS3102E18-1SW M83723/21R1801W MIL-C-5015 MIL-DTL- https//www.nsnlookup.com
MS3102F36-7S MILC83723-21 M83723/21R3607N MS3102R36-7SC MS3452W36-7S MIL-C-5015 An electrical fitting
MS3102A18-1SW MS3452W18-1SW 810VI0833 MILC83723-21 MS3102E18-1SW M83723/21R1801W MIL-C-5015 MIL-DTL-
Electrical Receptacle Connector 012609645 5935-01-260-9645 5935012609645 012609645 is an electrical
M83723/21R3607N MS3102R36 -7SC MS3452W36-7S MIL-C-5015 An electrical fitting MS3102A18-1SW MS3452W18
MS3102A18-1SW MS3452W18-1SW 810VI0833 MILC83723-21 -7SC MS3452W36-7S MIL-C-5015 An electrical fitting
Restrictions 5935-01-260-9645
5935-01-260-9645 is a Electrical Receptacle Connector that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item contains gold.
Import and Export 5935-01-260-9645
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5935-01-260-9645
- US Army (A918)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- A196
- Supplementary Receivers:
- BF
- US Air Force (FXGX)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- FXTX
- US Marine Corps (MC49)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- MC13
- US Navy (N9BN)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- N9ND
- Supplementary Collaborators:
- KE
- Brazil (YA01)
- Effective Date:
- 1 Jul 2001
- Spain (YB01)
- Effective Date:
- 1 May 2004
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5935-01-260-9645
- Part Number
- Manufacturer
- Status
- SAE-AS50151
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- MS3452W14-3S
- 0U583 - Sae International (Active)
- Primary Buy
- Primary Buy
- MIL-C-5015
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- MS3452W14-3S
- 96906 - Military Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- MS3102R14-3SC
- 96906 - Military Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- M83723/21R1403N
- 81349 - Military Specifications (Active)
- Transferred
- Transferred
- MILC83723-21
- 81349 - Military Specifications (Active)
- Transferred
- Transferred
Datasheet 5935-01-260-9645
- Characteristic
- Specifications
- FIIG
- Specifications
- A039B0
- Distance From Mounting Shoulder To Front Face [AFQK]
- 0.750 Inches Minimum And 0.781 Inches Maximum
- Center To Center Distance Between Mounting Facilities Parallel To Height [AEBW]
- 0.906 Inches Nominal
- Connector Locking Method [AFRV]
- Externally Threaded Shell
- Contact Material [CQTZ]
- Copper Alloy Single Mating End Single Contact Grouping
- Contact Maximum Ac Voltage Rating In Volts [AFRD]
- 500.0 Single Mating End Single Contact Grouping
- Contact Removability [AFQZ]
- Removable Single Mating End Single Contact Grouping
- Contact Maximum Current Rating In Amps [AFRC]
- 73.0 Single Mating End Single Contact Grouping
- Contact Maximum Dc Voltage Rating In Volts [AFRE]
- 700.0 Single Mating End Single Contact Grouping
- Contact Position Arrangement Style [AFQX]
- 14-3 Single Mating End
- Contact Surface Treatment Document And Classification [CRBJ]
- Mil-G-45204 Mil Spec Single Treatment Response Single Mating End Single Contact Grouping
- Contact Surface Treatment [CQYH]
- Gold Single Mating End Single Contact Grouping
- Distance Between Centerlines Of Mounting Facilities Parallel To Body Width [AEHA]
- 0.906 Inches Nominal
- Environmental Protection [ADZC]
- Moisture Proof And Salt Water Resistant And Vibration Proof
- Body Style [AAQL]
- Straight Shape, External Coupling
- Mating End Quantity [AFQW]
- 1
- Nominal Thread Size [CQJX]
- 0.875 Inches
- Included Contact Type [CXCL]
- Round Socket Single Mating End Single Contact Grouping
- Included Contact Quantity [CXCG]
- 1 Single Mating End Single Contact Grouping
- Insert Material [CQZG]
- Rubber Synthetic Single Mating End
- Insert Position In Deg [AFRP]
- 0.0
- Polarization Method [AFRN]
- Keyway Or Multiple Keyway
- Precious Material And Location [PMLC]
- Contact Surface Gold
- Precious Material And Weight [PMWT]
- 0.005 Gold Grains, Troy
- Precious Material [PRMT]
- Gold
- Shell Material [CSPT]
- Aluminum Alloy
- Shell Surface Treatment Document And Classification [CTBC]
- Qq-P-416,Ty 2,Cl 3 Fed Spec All Treatment Responses
- Shell Surface Treatment [CSWM]
- Cadmium And Chromate
- Shell Type [AFRT]
- Solid
- Overall Height [ABKW]
- 1.188 Inches Nominal
- Overall Length [ABHP]
- 1.937 Inches Maximum
- Overall Width [ABMK]
- 1.188 Inches Nominal
- Thread Series Designator [THSD]
- Unef
- Threaded Device Type [AFQR]
- Coupling Facility
- Unthreaded Mounting Hole Diameter [AEBV]
- 0.115 Inches Minimum And 0.130 Inches Maximum
- Specification/Standard Data [ZZZK]
- 96906-Ms3452 Government Standard
- Terminal Location [CQTM]
- Back Single Mating End Single Contact Grouping
- Terminal Type [CSCF]
- Crimp Single Mating End Single Contact Grouping
- Test Data Document [TEST]
- 81349-Mil-C-5015 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
- Thread Direction [AAJF]
- Right-Hand
- Thread Class [AAJD]
- 2A
- Thread Quantity Per Inch [CMLP]
- 20
Weapon Systems (WSDC) 5935-01-260-9645
DLA Procurement Analysis 5935-01-260-9645
- Last Stock Position:
- 2 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5935-01-260-9645
Army
- Materiel Category and Inventory Manager:
- Q
- Electronics Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 5935-01-260-9645
Freight Information 5935-01-260-9645
5935-01-260-9645 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 061680. A Sub NMFC of Z. It has a NMFC Description of ELEC WIRING PLUGS ETC. 5935-01-260-9645 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34570 which rates the freight between FCL and LCL. 5935-01-260-9645 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 658 for ocean manifesting and military sealift. 5935-01-260-9645 is not classified as a special type of cargo when transported by water. 5935-01-260-9645 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5935-01-260-9645
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- No Requirement
- Not Applicable
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5935-01-260-9645 1 Records
Contracting Technical Data File (CTDF) 5935-01-260-9645 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: