Premium Information is available for this item - Upgrade for $1 a day
5935-01-255-4004
Cable Clamp To Connector Adapter
5935012554004 012554004 SAE-AS85049/18 M85049/1825W07C MIL-C-85049/18
An item specifically designed to be placed around that portion of a CONNECTOR, RECEPTABLE, ELECTRICAL or CONNECTOR, PLUG, ELECTRICAL which contains the facilities for attaching wires or cables.It may be designed to provide the necessary accomodations between an electrical cable clamping device and an electrical connector shell, or it may include the clamping device.It may be used for shielding against electrical interference, mechanical injury, or physical damage due to environmental conditions. View more Electrical Connector Backshell
November 2023
12
Marketplace 5935-01-255-4004
Request a Quotation from participating marketplace vendors
Related Documents 5935-01-255-4004 5+ Documents (More...)
M85049/18-19W05 M85049/1819W05 MIL-C-85049/18 AS85049/18 An item specifically designed to be placed
MIL-C-85049/18B M85049/1811W03 AS85049 MIL-C-85049/18 M85049/18-11W03 An item specifically designed
M85049/18-19W05 M85049/1819W05 MIL-C-85049/18 AS85049/18 An item specifically designed to be placed
M85049/1819W03 M85049/18-19W03 AS85049/18 MIL-C-85049/18 An item specifically designed to be placed
M85049/18-19W05 M85049/1819W05 MIL-C-85049/18 AS85049/18 An item specifically designed to be placed
MIL-C-85049/18B M85049/1811W03 AS85049 MIL-C-85049/18 M85049/18-11W03 An item specifically designed
https//www.nsnlookup.com /fsg-59/fsc-5935/us 5935-01-255-4004 Cable Clamp To Connector Adapter 012554004
M85049/1825W07C MIL-C-85049/18 An item specifically designed to be placed around that portion of M85049
M85049/18-19W05 M85049/1819W05 MIL-C-85049/18 AS85049/18 An item specifically designed to be placed
MIL-C-85049/18B M85049/1811W03 AS85049 MIL-C-85049/18 M85049/18-11W03 An item specifically designed
Restrictions 5935-01-255-4004
5935-01-255-4004 is a Cable Clamp To Connector Adapter that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
Import and Export 5935-01-255-4004
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5935-01-255-4004
- US Air Force (FXGX)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- FXTX
- US Navy (N9BN)
- Effective Date:
- 1 Nov 2005
- Supplementary Collaborators:
- KE
Approved Sources 5935-01-255-4004
- Part Number
- Manufacturer
- Status
- SAE-AS85049/18
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- M85049/1825W07C
- 0U583 - Sae International (Active)
- Primary Buy
- Primary Buy
- M85049/1825W07C
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- MIL-C-85049/18
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- M85049/1825W07C
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5935-01-255-4004
- Characteristic
- Specifications
- FIIG
- Specifications
- A10100
- Cable Opening Diameter [AGTW]
- 19.05 Millimeters Minimum And 22.23 Millimeters Maximum
- Cable Opening Quantity [AKRD]
- 1
- Material [MATT]
- Aluminum Alloy
- Mounting Facility Type And Quantity [AXHR]
- 1 Threaded Coupling
- Nominal Thread Size [CQJX]
- 37.0 Millimeters
- Seal Material [ABAH]
- Rubber, Silicone Base
- Seal Type [AKRF]
- Grommet And Preformed Packing
- Size Designation [ALJP]
- 25
- Overall Height [ABKW]
- 47.0 Millimeters Maximum
- Overall Length [ABHP]
- 85.47 Millimeters Nominal
- Overall Width [ABMK]
- 38.1 Millimeters Maximum
- Thread Series Designator [THSD]
- Iso M
- Thread Tolerance Class [CTTC]
- 6G Internal
- Specification/Standard Data [ZZZK]
- 81349-Mil-C-85049/18 Government Specification
- Style Designator [STYL]
- Straight Type W/Cable Clamp
- Surface Treatment [SFTT]
- Cadmium
- Test Data Document [TEST]
- 81349-Mil-C-85049 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
- Thread Direction [AAJF]
- Right-Hand
- Thread Pitch In Millimeters [CQQR]
- 1.00
Weapon Systems (WSDC) 5935-01-255-4004
DLA Procurement Analysis 5935-01-255-4004
- Last Stock Position:
- 4 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5935-01-255-4004
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5935-01-255-4004
Freight Information 5935-01-255-4004
5935-01-255-4004 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 061680. A Sub NMFC of Z. It has a NMFC Description of ELEC WIRING PLUGS ETC. 5935-01-255-4004 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34570 which rates the freight between FCL and LCL. 5935-01-255-4004 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 658 for ocean manifesting and military sealift. 5935-01-255-4004 is not classified as a special type of cargo when transported by water. 5935-01-255-4004 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5935-01-255-4004
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Procurement History 5935-01-255-4004 2 Records
Contracting Technical Data File (CTDF) 5935-01-255-4004 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: