Premium Information is available for this item - Upgrade for $1 a day
5935-01-217-8575
Electrical Receptacle Connector
5935012178575 012178575 4016995-29 MM29-22PGDDSS-50 MM29-22PGDD-50 UMI-29M-DS-50GC
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR. View more Electrical Receptacle Connector
November 2023
5
Marketplace 5935-01-217-8575
Request a Quotation from participating marketplace vendors
Updated Every 15 Minutes 
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 5935-01-217-8575 1+ Documents (More...)
Electrical Receptacle Connector 012178575 5935-01-217-8575 5935012178575 012178575 is an electrical
Restrictions 5935-01-217-8575
5935-01-217-8575 is a Electrical Receptacle Connector that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item contains gold.
Import and Export 5935-01-217-8575
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5935-01-217-8575
- US Air Force (FXGX)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- FXTX
Approved Sources 5935-01-217-8575
- Part Number
- Manufacturer
- Status
- 4016995-29
- Manufacturer
- 07187 - Honeywell International Inc. (Active)
- Primary Buy
- Primary Buy
- MM29-22PGDDSS-50
- 95238 - Winchester Interconnect Corporation (Active)
- Secondary Buy
- Secondary Buy
- MM29-22PGDD-50
- 95238 - Winchester Interconnect Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- UMI-29M-DS-50GC
- 97954 - U S Components Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5935-01-217-8575
- Characteristic
- Specifications
- FIIG
- Specifications
- A039B0
- Connector Locking Method [AFRV]
- Friction
- Contact Material [CQTZ]
- Copper Alloy Single Mating End Single Contact Grouping
- Contact Maximum Ac Voltage Rating In Volts [AFRD]
- 350.0 Single Mating End Single Contact Grouping
- Contact Position Arrangement Style [AFQX]
- 29 Single Mating End
- Contact Removability [AFQZ]
- Nonremovable Single Mating End Single Contact Grouping
- Contact Maximum Current Rating In Amps [AFRC]
- 3.0 Single Mating End Single Contact Grouping
- Contact Surface Treatment Document And Classification [CRBJ]
- Mil-G-45204,Ty 1,Grade C,Cl 1 Mil Spec Single Treatment Response Single Mating End Single Contact Grouping
- Contact Surface Treatment [CQYH]
- Gold Single Mating End Single Contact Grouping
- Distance Between Mounting Facility Centers [AEJN]
- 1.094 Inches Nominal
- Body Style [AAQL]
- Straight Shape
- Mating End Quantity [AFQW]
- 1
- Nominal Thread Size [CQJX]
- 0.086 Inches
- Included Contact Type [CXCL]
- Round Pin Single Mating End Single Contact Grouping
- Included Contact Quantity [CXCG]
- 29 Single Mating End Single Contact Grouping
- Insert Material Document And Classification [CTKL]
- Mil-P-19833,Ty Gdi-30 Or Gdi-30F Mil Spec All Material Responses Single Mating End
- Insert Material [CQZG]
- Glass Single Mating End And Plastic Diallyl Phthalate Single Mating End
- Polarization Method [AFRN]
- Guide Pin/Socket
- Precious Material And Location [PMLC]
- Contact And Guide Pin Surfaces Gold
- Precious Material [PRMT]
- Gold
- Precious Material And Weight [PMWT]
- 0.029 Gold Grains, Troy
- Overall Height [ABKW]
- 0.466 Inches Minimum And 0.531 Inches Maximum
- Overall Length [ABHP]
- 1.343 Inches Nominal
- Overall Width [ABMK]
- 0.265 Inches Nominal
- Threaded Device Type [AFQR]
- Mounting Stud
- Terminal Location [CQTM]
- Back Single Mating End Single Contact Grouping
- Terminal Type [CSCF]
- Tab, Solder Lug Single Mating End Single Contact Grouping
- Thread Class [AAJD]
- 2A
- Thread Direction [AAJF]
- Right-Hand
- Thread Series Designator [THSD]
- Unc
- Thread Quantity Per Inch [CMLP]
- 56
Weapon Systems (WSDC) 5935-01-217-8575
DLA Procurement Analysis 5935-01-217-8575
- Last Stock Position:
- 12 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5935-01-217-8575
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- E
- The current standard price is an estimated price.
Estimated Price challenges are allowed but follow procedures in para 60.b. (3) of section L of this manual.
This code will be changed to a P code upon notification of a contract price or this code will be changed to an updated code upon determination of a valid price.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5935-01-217-8575
Freight Information 5935-01-217-8575
5935-01-217-8575 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 061680. A Sub NMFC of Z. It has a NMFC Description of ELEC WIRING PLUGS ETC. 5935-01-217-8575 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34570 which rates the freight between FCL and LCL. 5935-01-217-8575 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 658 for ocean manifesting and military sealift. 5935-01-217-8575 is not classified as a special type of cargo when transported by water. 5935-01-217-8575 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5935-01-217-8575
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Procurement History 5935-01-217-8575 1 Records
Contracting Technical Data File (CTDF) 5935-01-217-8575 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: