Premium Information is available for this item - Upgrade for $1 a day
5935-01-192-1462
Receptacle Dummy Connector
5935011921462 011921462 MIL-DTL-83723/61 M83723/61-212A MIL-C-83723 MS27297-2 MIL-C-83723/61-212A MIL-C-83723/61
An item specifically designed to mate with a plug connector to perform one or more special functions, such as to support a plug connector when not in use, short contacts, or open or close electrical circuits, in or on another connector. It does not have provisions for attaching a wire, cable, or contact. It is designed to mount on a panel, bulkhead, wall, or chassis. It does not include connector shells which are merely used to position a plug connector on a panel. View more Receptacle Dummy Connector
June 2023
10
Marketplace 5935-01-192-1462
Request a Quotation from participating marketplace vendors
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 5935-01-192-1462 5+ Documents (More...)
M83723/61-120A MIL-C-83723/61 MIL-C-83723/61 DUMMY CONNECTOR,RECEPTACLE 13 EA NS Request Quotation
Dummy Connector 5935011921462 Dummy Connector5935011921462 011921462 MIL-DTL-83723/61 M83723/61-212A
M83723/61-124A MIL-C-83723/61 MS27296-9 An item specifically designed to mate with a plug connector
Dummy Connector5935011921462 011921462 MIL-DTL-83723/61 M83723/61-212A MIL-C-83723 MS27297-2 MIL-C-83723
M83723/61-124A MIL-C-83723/61 MS27296-9 An item specifically designed to mate with a plug connector
Dummy Connector5935011921462 011921462 MIL-DTL-83723/61 M83723/61-212A MIL-C-83723 MS27297-2 MIL-C-83723
MIL-C-83723/61 DUMMY CONNECTOR,RECEPTACLE 13 EA NS Request Quotation Subscribe to View Vendor Details
Receptacle Dummy Connector 5935011921462 M83723/61-212A MIL-C-83723 MS27297-2 MIL-C-83723/61-212A
/61 An item specifically designed to mate with a plug connector to perform MIL-C-83723/61 DUMMY
/fsc-5935/us 5935-01-192-1462 Receptacle Dummy Connector 5935011921462 M83723/61-212A MIL-C-83723 MS27297
Restrictions 5935-01-192-1462
5935-01-192-1462 is a Receptacle Dummy Connector that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
Import and Export 5935-01-192-1462
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5935-01-192-1462
- US Air Force (FXGX)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXTX
- US Navy (N9BN)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- N9ND
- Supplementary Collaborators:
- GTKE
- Australia (ZA01)
- Effective Date:
- 1 Sep 2005
- United Kingdom (ZK01)
- Effective Date:
- 1 Jul 2000
Approved Sources 5935-01-192-1462
- Part Number
- Manufacturer
- Status
- M83723/61-212A
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-DTL-83723/61
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MIL-C-83723/61
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- MIL-C-83723
- 81349 - Military Specifications (Active)
- Transferred
- Transferred
- MS27297-2
- 96906 - Military Standards (Active)
- Transferred
- Transferred
- MIL-C-83723/61-212A
- 81349 - Military Specifications (Active)
- Transferred
- Transferred
Datasheet 5935-01-192-1462
- Characteristic
- Specifications
- FIIG
- Specifications
- A039B0
- Center To Center Distance Between Mounting Facilities Parallel To Height [AEBW]
- 0.812 Inches Nominal
- Connector Locking Method [AFRV]
- Bayonet Pin
- Distance Between Centerlines Of Mounting Facilities Parallel To Body Width [AEHA]
- 0.812 Inches Nominal
- Environmental Protection [ADZC]
- Humidity Resistant And Salt Water Resistant And Shock Proof And Vibration Proof
- Mating End Quantity [AFQW]
- 1
- Shell Material [CSPT]
- Aluminum Alloy
- Shell Surface Treatment [CSWM]
- Anodize
- Shell Type [AFRT]
- Solid
- Overall Height [ABKW]
- 1.031 Inches Nominal
- Overall Length [ABHP]
- 0.760 Inches Minimum And 0.800 Inches Maximum
- Overall Width [ABMK]
- 1.031 Inches Nominal
- Unthreaded Mounting Hole Diameter [AEBV]
- 0.125 Inches Nominal
- Specification/Standard Data [ZZZK]
- 81349-Mil-C-83723/61 Government Specification
- Test Data Document [TEST]
- 81349-Mil-C-83723 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
Weapon Systems (WSDC) 5935-01-192-1462
DLA Procurement Analysis 5935-01-192-1462
- Last Stock Position:
- 12 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5935-01-192-1462
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5935-01-192-1462
Freight Information 5935-01-192-1462
5935-01-192-1462 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 061680. A Sub NMFC of Z. It has a NMFC Description of ELEC WIRING PLUGS ETC. 5935-01-192-1462 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34570 which rates the freight between FCL and LCL. 5935-01-192-1462 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5935-01-192-1462 is not classified as a special type of cargo when transported by water. 5935-01-192-1462 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5935-01-192-1462
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 5935-01-192-1462 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- J
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: