Premium Information is available for this item - Upgrade for $1 a day
5935-01-017-5905
Electrical Receptacle Connector
5935010175905 010175905 5006-0400 204-0022 80-6100-6681-5 3432-2002
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR. View more Electrical Receptacle Connector
August 2023
22
Marketplace 5935-01-017-5905
Request a Quotation from participating marketplace vendors
Updated Every Day Updated Every Day 
Updated Every Day Updated Every Day 
Updated Every Day Updated Every Day Updated Every Day Related Documents 5935-01-017-5905 5+ Documents (More...)
Documents 5935-01-208-2641 1+ Documents (More... ) https//www.nsnlookup.com /fsg-59/fsc-5935/us 5935-01-017-5905
Electrical Receptacle Connector 010175905 Account Upgrade 5935-01-017-5905Electrical Receptacle
Request a Quotation from participating marketplace vendors Request Updated Every Day 9505-98-204-0022
RQST NE Updated Every Day 9505-98-204-0022 RQST Updated Every Day 9505-98-204-0022 RQST NE Related Documents
/fsg-28/fsc-2805/uk
United Kingdom (UK) 4. 2805-99-204-0022 Marketplace Restrictions Approved Sources Datasheet Management
Request a Quotation from participating marketplace vendors Request Updated Every Day 2805-99-204-0022
Restrictions 5935-01-017-5905
5935-01-017-5905 is a Electrical Receptacle Connector that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item contains gold.
Import and Export 5935-01-017-5905
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5935-01-017-5905
- US Army (A918)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- A196
- US Coast Guard (C911)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- C007
- US Air Force (FXGX)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- FXTX
- US Marine Corps (MC49)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- MC13
- US Navy (N9BN)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- N9ND
- Supplementary Collaborators:
- HD
- Poland (WP01)
- Effective Date:
- 1 Dec 2006
- Brazil (YA01)
- Effective Date:
- 1 Dec 2001
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
- Denmark (ZS01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5935-01-017-5905
- Part Number
- Manufacturer
- Status
- 3432-2002
- Manufacturer
- 53387 - 3M Company (Obsolete)
- Original Design
- Original Design
- 80-6100-6681-5
- D2607 - 3M Deutschland Gmbh (Active)
- Secondary Buy
- Secondary Buy
- 3432-2002
- 75037 - Minnesota Mining And Mfg Co 3M (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 5006-0400
- 54189 - Discount Trophy & Award Co (Active)
- Advisory Reference
- Advisory Reference
- 204-0022
- 27014 - National Semiconductor Corporation (Active)
- Advisory Reference
- Advisory Reference
- 3432-2002
- 76381 - 3M Company (Active)
- Advisory Reference
- Advisory Reference
- 3432-2002
- 28213 - Minnesota Mining And Mfg Co Consumer (Replaced)
- Advisory Reference
- Advisory Reference
Datasheet 5935-01-017-5905
- Characteristic
- Specifications
- FIIG
- Specifications
- A039B0
- Contact Material [CQTZ]
- Copper Alloy Single Mating End Single Contact Grouping
- Contact Maximum Current Rating In Amps [AFRC]
- 1.0 Single Mating End Single Contact Grouping
- Contact Removability [AFQZ]
- Nonremovable Single Mating End Single Contact Grouping
- Contact Maximum Dc Voltage Rating In Volts [AFRE]
- 500.0 Single Mating End Single Contact Grouping
- Contact Position Arrangement Style [AFQX]
- 2 Rows Of Contacts Non-Inserted Board Single Mating End
- Contact Surface Treatment [CQYH]
- Gold Single Mating End Single Contact Grouping And Nickel Single Mating End Single Contact Grouping
- Distance Between Mounting Facility Centers [AEJN]
- 2.600 Inches Nominal
- Body Style [AAQL]
- Straight Type
- Mating End Quantity [AFQW]
- 1
- Included Contact Quantity [CXCG]
- 40 Single Mating End Single Contact Grouping
- Included Contact Type [CXCL]
- Round Pin Single Mating End Single Contact Grouping
- Insert Material [CQZG]
- Plastic Single Mating End
- Precious Material And Location [PMLC]
- Contact Surfaces Gold
- Precious Material And Weight [PMWT]
- 0.040 Gold Grains, Troy
- Precious Material [PRMT]
- Gold
- Terminal Type [CSCF]
- Tab, Solder Lug Single Mating End Single Contact Grouping
- Overall Length [ABHP]
- 2.760 Inches Nominal
- Overall Width [ABMK]
- 0.290 Inches Nominal
- Unthreaded Mounting Hole Diameter [AEBV]
- 0.096 Inches Nominal
- Terminal Location [CQTM]
- Back Single Mating End Single Contact Grouping
Weapon Systems (WSDC) 5935-01-017-5905
DLA Procurement Analysis 5935-01-017-5905
Management Data 5935-01-017-5905
Army
- Materiel Category and Inventory Manager:
- Q
- Electronics Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 5935-01-017-5905
Freight Information 5935-01-017-5905
5935-01-017-5905 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 061680. A Sub NMFC of Z. It has a NMFC Description of ELEC WIRING PLUGS ETC. 5935-01-017-5905 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34570 which rates the freight between FCL and LCL. 5935-01-017-5905 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 658 for ocean manifesting and military sealift. 5935-01-017-5905 is not classified as a special type of cargo when transported by water. 5935-01-017-5905 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5935-01-017-5905
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- No Requirement
- Not Applicable
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5935-01-017-5905 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: